Audio/Video Transport Working Group Q. Wu
Internet-Draft Huawei
Intended status: Standards Track October 19, 2012
Expires: April 20, 2013

Advertisement for multi-source endpoint multiplexing multiple media type in the same RTP session
draft-wu-avtcore-multisrc-endpoint-adver-01.txt

Abstract

When two endpoints with multiple media sources are in communication, each media source or each receiver within either endpoint may send or receive reception report independently. This may incur a lot of duplicated reception report to and from the endpoint with multiple sources. This document discusses how to tackle these problems and propose three phases for suppressing reception reports.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http:/⁠/⁠datatracker.ietf.org/⁠drafts/⁠current/⁠.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on April 20, 2013.

Copyright Notice

Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http:/⁠/⁠trustee.ietf.org/⁠license-⁠info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

For some applications that use unicast transport, e.g., in RTCWeb application, an endpoint with multiple media sources (i.e.,multiple-source hosts, e.g., a client with several cameras) may use a different SSRC for each medium but sending them in the same RTP session, which reduces communication failure due to NAT and firewall when using multiple RTP sessions or transport flows.

However when two endpoints with multiple media sources are in communication, each media source within either endpoint may send reception report independently and the receiving endpoint may not know the reception reports received from different media source are from the same sending endpoint. This creates the following three problems:

This document discusses how to tackle these problems. Three phases for suppressing reception reports are proposed.

2. Terminology

2.1. Standards Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [RFC2119].

3. Protocol Overview

In order to suppress unnecessary reception reports to and from multi-source endpoint, multi-source endpoint should group media sources originating from a single endpoint and elect one or a set of specified SSRCs for reception report processing (e.g., reception report sending, reception report receiving and reception report monitoring).

3.1. Report Source Grouping

When an endpoint with multiple sources multiplexes multiple media types in the same RTP session, the media source originating from the same endpoint should be grouped together. Similarly the endpoint with multiple sources may have multiple one or more than one report source for monitoring. These report sources for monitoring should also be grouped together. Therefore an endpoint with multiple sources should at least split all its own media sources or receivers into two groups(i.e., split SSRCs into two groups): One is sending group, the other is monitoring group. Each group may have one or several group members. Each group member is identified by a different SSRC.

3.2. Report Source Election

When grouping for each endpoint with multiple sources is available, in order to prevent group members receiving duplicated data, one or more than one group member MUST be elected from sending group as report source for reception report sending. When one report source leaves the session or is down, another candidate report source can replace instead. If the monitoring is used, each endpoint with multiple sources MUST have at least one report source for monitoring purpose. One or more than one reporting sources MUST be selected from monitoring group for monitoring use.

Each endpoint with multiple sources at least has one SSRC for reception report sending. If the monitoring is used, the endpoint with multiple sources should choose another SSRC from monitoring group as monitoring report source.

3.3. Report Source Advertisement

When report sources are elected for reception report sending, and monitoring purpose respectively, it is necessary to signal which report source is used for which purpose.

In this document we define two new SDES items to advertise the reporting sources from endpoint with multiple sources that are used for reception report sending and monitoring respectively (See section 5.1 and section 5.2 for protocol format details).

When report source is advertised, the selected report source can send reception report about the same remote media source on behalf of the media sources of its own.

In order to prevent duplicated reception report sent from one of its own media sources to another of its own within the same endpoint with multiple sources(i.e., self-reporting), the report source should know the other media sources of its own and suppress sending the reception report on remote source to its own media sources.

4. Protocol formats

4.1. SDES item for Reception Report Sending

This sub-section defines the format of the Reception Report Sending SDES item. The SDES item is carried in the RTCP SDES packet. The packet format for the RTCP SDES is defined in Section 6.5 of [RFC3550]. Each SDES packet is composed of a header with fixed-length fields for version, source count, packet type (PT), and length, followed by zero or more chunks. Each chunk consists of an SSRC/CSRC identifier followed by zero or more SDES items. In the SDES packet, the PT field is set to SDES(202).

4.1.1. RRS: Reception Report Sending SDES Item

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |    RRS=TBD    |     length    | Candidate Report Source SSRC
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |   ....
      +-+-+-+-+-+-+-+-+

The Reception Report Sending Item is not mandatory item and intended for indicating the elected report source for an endpoint with multiple sources, which is responsible for reception report sending. The SSRC/CSRC identifier included in the same chunk (at the beginning of this chunk) as the item is the SSRC of elected sending report source. Additionally, this item may carry one or more than one Candidate Report Source SSRCs. The candidate Report Source SSRC follows the same format as SSRC/CSRC identifier defined in RFC3550. Its length is described by the length field. The value of the length field does not include the two octet SDES item header. This item MUST be ignored by applications that are not configured to make use of it.

4.2. SDES item for Reception Report Monitoring

This sub-section defines the format of the Reception Report Monitoring SDES item. The SDES item is carried in the RTCP SDES packet. The packet format for the RTCP SDES is defined in Section 6.5 of [RFC3550].Each SDES packet is composed of a header with fixed-length fields for version, source count, packet type (PT), and length, followed by zero or more chunks. Each chunk consists of an SSRC/CSRC identifier followed by zero or more SDES items. In the SDES packet, the PT field is set to SDES(202).

4.2.1. RRM: Reception Report Monitoring SDES Item

       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |    RRM=TBD    |     length    | Candidate Report Source SSRC
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |   ....
      +-+-+-+-+-+-+-+-+

The Reception Report Sending Item is not mandatory item and intended for indicating the report source for an endpoint, which is responsible for reception report monitoring. The SSRC/CSRC identifier included in the same chunk as the item (at the beginning of this chunk) is the SSRC of elected sending report source. Additionally, this item may carry one or more than one Candidate Report Source SSRCs. The candidate Report Source SSRC follows the same format as SSRC/CSRC identifier defined in RFC3550. Its length is described by the length field. The value of the length field does not include the two octet SDES item header. This item MUST be ignored by applications that are not configured to make use of it.

5. Security Considerations

RTCP reports can contain sensitive information, including information about report source grouping for endpoint with multiple source and member of a session established between two or more endpoints. Therefore, the use of security mechanisms with RTP, as documented in Section 9 of [RFC3550] applies.

6. IANA Considerations

New SDES types for RTCP SDES are subject to IANA registration. For general guidelines on IANA considerations for RTCP SDES, refer to[RFC3550].

6.1. New RTCP SDES Type values

abbrev.      name                          value
RRSS: Reception Report Sending Source       TBD
RRRS: Reception Report Receiving Source     TBD

This document assigns two additional SDES type in the IANA "RTCP SDES Item Types Registry" to the new SDES items as follow:

[Note to RFC Editor: please replace RRSS and RRMS with the IANA provided RTCP SDES Item Types.]

7. References

7.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", March 1997.
[RFC3550] Schulzrinne, H., "RTP: A Transport Protocol for Real-Time Applications", RFC 3550, July 2003.
[RFC5285] Singer, D. and H. Desineni, "A General Mechanism for RTP Header Extensions", RFC 5285, July 2008.
[RFC4585] Ott, J., Wenger, S., Sato, N., Burmeister, C. and J. Rey, "Extended RTP Profile for Real-time Transport Control Protocol (RTCP)-Based Feedback (RTP/AVPF)", RFC 4595, July 2006.

7.2. Informative References

[I-D.westerlund-avtcore-multiplex-architecture] Westerlund, M., "Guidelines for using the Multiplexing Features of RTP", ID draft-westerlund-avtcore-multiplex-architecture-02, July 2012.
[I-D.lennox-avtcore-rtp-multi-stream] Lennox, J. and M. Westerlund, "Real-Time Transport Protocol (RTP) Considerations for Endpoints Sending Multiple Media Streams", ID draft-lennox-avtcore-rtp-multi-stream-00, July 2012.
[I-D.wu-avtcore-multiplex-multisource-endpoint] Wu, Q., "Bandwidth and RTCP timing issues for multi-source endpoint", ID draft-wu-avtcore-multiplex-multisource-endpoint-00, October 2012.

Author's Address

Qin Wu Huawei 101 Software Avenue, Yuhua District Nanjing, Jiangsu 210012 China EMail: sunseawq@huawei.com