Internet Engineering Task Force C. Tjhai
Internet-Draft M. Tomlinson
Intended status: Informational Post-Quantum
Expires: July 18, 2019 G. Bartlett
S. Fluhrer
Cisco Systems
D. Van Geest
ISARA Corporation
O. Garcia-Morchon
V. Smyslov
January 14, 2019

Framework to Integrate Post-quantum Key Exchanges into Internet Key Exchange Protocol Version 2 (IKEv2)


This document describes how to extend Internet Key Exchange Protocol Version 2 (IKEv2) so that the shared secret exchanged between peers has resistance against quantum computer attacks. The basic idea is to exchange one or more post-quantum key exchange payloads in conjunction with the existing (Elliptic Curve) Diffie-Hellman payload.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on July 18, 2019.

Copyright Notice

Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents ( in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

1. Introduction

1.1. Problem Description

Internet Key Exchange Protocol (IKEv2) as specified in RFC 7296 [RFC7296] uses the Diffie-Hellman (DH) or Elliptic Curve Diffie-Hellman (ECDH) algorithm to establish a shared secret between an initiator and a responder. The security of the DH and ECDH algorithms relies on the difficulty to solve a discrete logarithm problem in multiplicative and elliptic curve groups respectively when the order of the group parameter is large enough. While solving such a problem remains difficult with current computing power, it is believed that general purpose quantum computers will be able to solve this problem, implying that the security of IKEv2 is compromised. There are, however, a number of cryptosystems that are conjectured to be resistant against quantum computer attack. This family of cryptosystems are known as post-quantum cryptography (PQC). It is sometimes also referred to as quantum-safe cryptography (QSC) or quantum-resistant cryptography (QRC).

1.2. Proposed Extension

This document describes a framework to integrate QSC for IKEv2, while maintaining backwards compatibility, to derive a set of IKE keys that have resistance to quantum computer attacks. Our framework allows the negotiation of one or more QSC algorithm to exchange data, in addition to the existing DH or ECDH key exchange data. We believe that the feature of using more than one post-quantum algorithm is important as many of these algorithms are relatively new and there may be a need to hedge the security risk with multiple key exchange data from several distinct QSC algorithms.

The secrets established from each key exchange are combined in a way such that should the post-quantum secrets not be present, the derived shared secret is equivalent to that of the standard IKEv2; on the other hand, a post-quantum shared secret is obtained if both classical and post-quantum key exchange data are present. This framework also applies to key exchanges in IKE Security Associations (SAs) for Encapsulating Security Payload (ESP) [RFC4303] or Authentication Header (AH) [RFC4302], i.e. Child SAs, in order to provide a stronger guarantee of forward security.

Some post-quantum key exchange payloads may have size larger than the standard MTU size, and therefore there could be issues with fragmentation at IP layer. IKE does allow transmission over TCP where fragmentation is not an issue [RFC8229]; however, we believe that a UDP-based solution will be required too. IKE does have a mechanism to handle fragmentation within UDP [RFC7383], however that is only applicable to messages exchanged after the IKE_SA_INIT. To use this mechanism, we use the INTERMEDIATE exchange as outlined in [I-D.smyslov-ipsecme-ikev2-aux]. With this mechanism, we do an initial key exchange, using a smaller, possibly non-quantum resistant primitive, such as ECDH. Then, before we do the IKE_AUTH exchange, we perform one or more INTERMEDIATE exchanges, each of which includes a secondary key exchange. As the INTERMEDIATE exchange is encrypted, the IKE fragmentation protocol RFC7383 can be used. The IKE SK values will be updated after each exchange, and so the final IKE SK values will depend on all the key exchanges, hence they are secure if any of the key exchanges are secure.

Note that readers should consider the approach in this document as providing a long term solution in upgrading the IKEv2 protocol to support post-quantum algorithms. A short term solution to make IKEv2 key exchange quantum secure is to use post-quantum pre-shared keys as discussed in [I-D.ietf-ipsecme-qr-ikev2].

1.3. Changes

Changes in this draft in each version iterations.




1.4. Document Organization

The remainder of this document is organized as follows. Section 2 summarizes design criteria. Section 3 describes how post-quantum key exchange is performed between two IKE peers and how keying materials are derived for both SAs and child SAs. A summary of alternative approaches that have been considered, but later discarded, are described in Section 4. Section 5 discusses IANA considerations for the namespaces introduced in this document, and lastly Section 6 discusses security considerations.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2. Design Criteria

The design of the proposed post-quantum IKEv2 is driven by the following criteria:

Need for post-quantum cryptography in IPsec. Quantum computers
might become feasible in the next 5-10 years. If current Internet communications are monitored and recorded today (D), the communications could be decrypted as soon as a quantum- computer is available (e.g., year Q) if key negotiation only relies on non post-quantum primitives. This is a high threat for any information that must remain confidential for a long period of time T > Q-D. The need is obvious if we assume that Q is 2040, D is 2020, and T is 30 years. Such a value of T is typical in classified or healthcare data.
Hybrid. Currently, there does not exist a post-quantum key
exchange that is trusted at the level that ECDH is trusted against conventional (non-quantum) adversaries. A hybrid approach allows introducing promising post-quantum candidates next to well-established primitives, since the overall security is at least as strong as each individual primitive.
Focus on quantum-resistant confidentiality. A passive attacker
can eavesdrop on IPsec communication today and decrypt it once a quantum computer is available in the future. This is a very serious attack for which we do not have a solution. An attacker can only perform active attacks such as impersonation of the communicating peers once a quantum computer is available, sometime in the future. Thus, our design focuses on quantum- resistant confidentiality due to the urgency of this problem. This document does not address quantum-resistant authentication since it is less urgent at this stage.
Limit amount of exchanged data. The protocol design should be
such that the amount of exchanged data, such as public-keys, is kept as small as possible even if initiator and responder need to agree on a hybrid group or multiple public-keys need to be exchanged.
Future proof. Any cryptographic algorithm could be potentially
broken in the future by currently unknown or impractical attacks: quantum computers are merely the most concrete example of this. The design does not categorize algorithms as "post-quantum" or "non post-quantum" and does not create assumptions about the properties of the algorithms, meaning that if algorithms with different properties become necessary in the future, this framework can be used unchanged to facilitate migration to those algorithms.
Limited amount of changes. A key goal is to limit the number of
changes required when enabling a post-quantum handshake. This ensures easier and quicker adoption in existing implementations.
Localized changes. Another key requirement is that changes to
the protocol are limited in scope, in particular, limiting changes in the exchanged messages and in the state machine, so that they can be easily implemented.
Deterministic operation. This requirement means that the hybrid
post-quantum exchange, and thus, the computed key, will be based on algorithms that both client and server wish to support.
Fragmentation support. Some PQC algorithms could be relatively
bulky and they might require fragmentation. Thus, a design goal is the adaptation and adoption of an existing fragmentation method or the design of a new method that allows for the fragmentation of the key shares.
Backwards compatibility and interoperability. This is a
fundamental requirement to ensure that hybrid post-quantum IKEv2 and a non-post-quantum IKEv2 implementations are interoperable.
FIPS compliance. IPsec is widely used in Federal Information
Systems and FIPS certification is an important requirement. However, algorithms that are believed to be post-quantum are not FIPS compliant yet. Still, the goal is that the overall hybrid post-quantum IKEv2 design can be FIPS compliant.

3. The Framework of Hybrid Post-Quantum Key Exchange

3.1. Overall design

This design assigns new group identifiers (Transform Type 4) to the various post-quantum key exchanges (which will be defined later). We specifically do not make a distinction between classical (DH and ECDH) and post-quantum key exchanges, nor post-quantum algorithms which are true key exchanges versus post-quantum algorithms that act as key transport mechanisms; all are treated equivalently by the protocol. In order to support both hybrid key exchanges (that is, relying on distinct key exchanges) and fragmentation, the proposed hybrid post-quantum IKEv2 protocol extends IKE [RFC7296] by adding additional key exchange messages (INTERMEDIATE) between the IKE_SA_INIT and the IKE_AUTH exchanges. In order to minimize communication overhead, only the key shares that are agreed to be used are actually exchanged. In order to achieve this, the IKE_SA_INIT exchange now includes notify payloads that negotiate the extra key exchanges to be used. The initiator IKE_SA_INIT message includes a notify that lists the extra key exchange policy required by the initiator; the responder selects one of the listed policies, and includes that as a notify in the response IKE_SA_INIT message. Then, the initiator and the responder perform one (or possibly more) INTERMEDIATE exchange; each such exchange includes a KE payload for the key exchange that was negotiated.

Here is an overview of the initial exchanges:

     Initiator                                Responder
  <-- IKE_SA_INIT  (and extra key exchange negotiation) -->

  <-- {INTERMEDIATE (hybrid post-quantum key exchange)} -->
  <-- {INTERMEDIATE (hybrid post-quantum key exchange)} -->

                     <-- {IKE_AUTH} -->

The extra post-quantum key exchanges can use algorithms that are currently considered to be resistant to quantum computer attacks. These algorithms are collectively referred to as post-quantum algorithms in this document.

Most post-quantum key agreement algorithms are relatively new, and thus are not fully trusted. There are also many proposed algorithms, with different trade-offs and relying on different hard problems. The concern is that some of these hard problems may turn out to be easier to solve than anticipated (and thus the key agreement algorithm not be as secure as expected). A hybrid solution allows us to deal with this uncertainty by combining a classical key exchanges with a post-quantum one, as well as leaving open the possibility of multiple post-quantum key exchanges.

The method that we use to perform hybrid key exchange also addresses the fragmentation issue. The initial IKE_INIT messages do not have any inherent fragmentation support within IKE; however that can include a relatively short KE payload (e.g. one for group 14, 19 or 31). The rest of the KE payloads are encrypted within INTERMEDIATE messages; because they are encrypted, the standard IKE fragmentation solution [RFC7383] is available.

3.2. Overall Protocol

In the simplest case, the initiator is happy with a single key exchange (and has no interest in supporting multiple), and he is not concerned with possible fragmentation of the IKE_SA_INIT messages (either because the key exchange he selects is small enough not to fragment, or he is confident that fragmentation will be handled either by IP fragmentation, or transport via TCP). In the following we overview the two protocol rounds involved in the hybrid post-quantum protocol.

In this case, the initiator performs the IKE_SA_INIT as standard, inserting this preferred key exchange (which is possibly a post-quantum algorithm) as the listed Transform Type 4, and including the initiator KE payload. If the responder accepts the policy, he responds with an IKE_SA_INIT response, and IKE continues as usual.

If the initiator desires to negotiate multiple key exchanges, or he needs IKE to handle any possible fragmentation, then he uses the protocol listed below.

3.2.1. IKE_SA_INIT Round: Negotiation

Multiple key exchanges are negotiated using the standard IKEv2 mechanism, via SA payload. For this purpose several new transform types, namely Additional Key Exchange 1, Additional Key Exchange 2, Additional Key Exchange 3, etc., are defined. They are collectively called Additional Key Exchanges and have slightly different semantics than existing IKEv2 transform types. They are interpreted as additional key exchanges that peers agreed to perform in a series of INTERMEDIATE exchanges. The possible transform IDs for these transform types are the same as IDs for the transform type 4 (Diffie-Hellman Group), so they all share a single IANA registry for transform IDs.

Key exchange method negotiated via transform type 4 MUST always take place in the IKE_SA_INIT exchange. Additional Key Exchanges negotiated via newly defined transforms MUST take place in series of INTERMEDIATE exchanges, in an order of the values of their transform types, so that key exchange negotiated using transform type N always precedes that of transform type N + 1. Each INTERMEDIATE exchange MUST bear exactly one key exchange method. Note that with this semantics, Additional Key Exchanges transforms are not associated with any particular type of key exchange and don't have any specific per transform type transform ID IANA registry. Instead they all share a single registry for transform IDs - "Diffie-Hellman Group Transform IDs", as well as Transform Type 4. All new key exchange algorithms (both classical or quantum safe) should be added to this registry. This approach gives peers flexibility in defining the ways they want to combine different key exchange methods.

When forming a proposal the initiator adds transforms for the IKE_SA_INIT exchange using transform type 4. In most cases they will contain classical key exchange methods, however it is not a requirement. Additional key exchange methods are proposed using Additional Key Exchanges transform types. All these transform types are optional, the initiator is free to select any of them for proposing additional key exchange methods. Consequently, if none of Additional Key Exchanges are included in the proposal, then this proposal indicates performing standard IKEv2, as defined in [RFC7296]. If the initiator includes any transform of type N (where N is among Additional Key Exchanges) in the proposal, the responder MUST select one of the algorithms proposed using this type. A transform ID NONE may be added to those transform types which contain key exchange methods that the initiator believes are optional.

The responder performs negotiation using standard IKEv2 procedure described in Section 3.3 of [RFC7296]. However, for the Additional Key Exchange types the responder's choice MUST NOT contain equal transform IDs (apart from NONE), and the ID selected for Transform Type 4 MUST NOT appear in any of Additional Key Exchange transforms. In other words, all selected key exchange methods must be different.

3.2.2. INTERMEDIATE Round: Additional Key Exchanges

For each extra key exchange agreed to in the IKE_SA_INIT exchange, the initiator and the responder perform an INTERMEDIATE exchange, as described in [I-D.smyslov-ipsecme-ikev2-aux].

This exchange is as follows:

      Initiator                     Responder
      HDR, SK {Ni2, KEi2}    -->
                             <--    HDR, SK {Nr2, KEr2}

The initiator sends a nonce in the Ni2 payload, and the key exchange payload in the KEi2; the group id of the KEi2 payload MUST match the negotiated extra key exchange. This packet is encrypted with the current IKE SK keys.

On receiving this, the responder sends a nonce in the Nr2 payload, and the key exchange payload KEr2; again, this packet is encrypted with the current IKE SA keys.

Once this exchange is done, then both sides compute an updated keying material:

        SKEYSEED = prf(SK_d(old), KE2result | Ni2 | Nr2)

where KE2result is the shared secret of the key exchange. Then, SK_d, SK_ai, SK_ar, SK_ei, SK_er, SK_pi, SK_pr are updated as:

        {SK_d | SK_ai | SK_ar | SK_ei | SK_er | SK_pi | SK_pr}
                = prf+ (SKEYSEED, Ni2 | Nr2 | SPIi | SPIr)

Note that the negotiated transform types (the encryption type, hash type, prf type) are not modified.

Both the initiator and the responder will use this updated key values for the next message.

3.2.3. IKE_AUTH Exchange

After the INTERMEDIATE exchanges have completed, then the initiator and the responder will perform an IKE_AUTH exchange. This exchange is the standard IKE exchange, except that the initiator and responder signed octets are modified as described in [I-D.smyslov-ipsecme-ikev2-aux].

3.2.4. CREATE_CHILD_SA Exchange

The CREATE_CHILD_SA exchange is used in IKEv2 for the purpose of creating additional Child SAs, rekeying them and rekeying IKE SA itself. When creating or rekeying Child SAs, the peers may optionally perform a Diffie-Hellmann key exchange to add a fresh entropy into the session keys, in case of IKE SA rekeying, the key exchange is mandatory.

If the IKE SA was created using multiple key exchange methods, the peers may want continue using multiple key exchanges in the CREATE_CHILD_SA exchange too. If the initiator includes any Additional Key Exchanges transform in the SA payload (along with Transform Type 4) and the responder agrees to perform additional key exchanges, then the additional key exchanges are performed in a series of the INFORMATIONAL exchanges that follows the CREATE_CHILD_SA exchange in an order of the values of their transform types, so that key exchange negotiated using transform type N always precedes key exchange negotiated using transform type N + 1. Each INFORMATIONAL exchange MUST bear exactly one key exchange method. Key exchange negotiated via Transform Type 4 always takes place in the CREATE_CHILD_SA exchange, as per IKEv2 specification.

Since after IKE SA is created the window size may be greater than one, and multiple concurrent exchanges may be active, it is essential to link the INFORMATIONAL exchanges together and with the CREATE_CHILD_SA exchange. A new status type notification ADDITIONAL_KEY_EXCHANGE is used for this purpose. Its Notify Message Type is <TBA by IANA>, Protocol ID and SPI Size are both set to 0. The data associated with this notification is a blob meaningful only to the responder, so that the responder can correctly link successive exchanges. For the initiator the content of this notification is an opaque blob.

The responder MUST include this notification in a CREATE_CHILD_SA or INFORMATIONAL response message in case next exchange is expected, filling it with some data that would allow linking this exchange to the next one. The initiator MUST copy the received notification with its content intact into the request message of the next exchange.

Below is an example of three additional key exchanges.

Initiator                             Responder
                             <--  HDR(CREATE_CHILD_SA), SK {SA, Nr, KEr,

                                 <--  HDR(INFORMATIONAL), SK {Nr2, KEr2,

                                 <--  HDR(INFORMATIONAL), SK {Nr3, KEr3,

                                 <--  HDR(INFORMATIONAL), SK {Nr4, KEr4}

4. Alternative Design

This section gives an overview on a number of alternative approaches that we have considered, but later discarded. These approaches are:

                     1                   2                   3
    0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
   | Next Payload  |C|F| RESERVED  |         Payload Length        |
   |  Diffie-Hellman Group Number  |     Fragment Identifier       |
   |         Fragment Index        |        Total Fragments        |
   |                  Total KE Payload Data Length                 |
   |                                                               |
   ~                       Fragmented KE Payload                   ~
   |                                                               |

When the flag F is set, this means the current KE payload is a fragment of a larger KE payload. The Payload Length field denotes the size of this payload fragment in octets--including the size of the generic payload header. The two-octet RESERVED field following Diffie-Hellman Group Number was to be used as a fragment identifier to help assembly and disassembly of fragments. The Fragment Index and Total Fragments fields are self-explanatory. The Total KE Payload Data Length indicates the size of the assembled KE payload data in octets. Finally, the actual fragment is carried in Fragment KE Payload field.

We discarded this approach because we believe that the working group may not be happy using the RESERVED field to change the format of a packet and that implementers may not like the complexity added from checking the fragmentation flag in each received payload. More importantly, fragmenting the messages in this way may leave the system to be more prone to denial of service (DoS) attacks. By using INTERMEDIATE to transport the large post-quantum key exchange payloads, there is no longer any issue with fragmentation.

5. IANA Considerations

This document also adds the following Transform Types to the "Transform Type Values" registry:

Type Description                Used In                        Reference
6    Additional Key Exchange 1  (optional in IKE, AH and ESP)  [RFCXXXX]
7    Additional Key Exchange 2  (optional in IKE, AH and ESP)  [RFCXXXX]
8    Additional Key Exchange 3  (optional in IKE, AH and ESP)  [RFCXXXX]
9    Additional Key Exchange 4  (optional in IKE, AH and ESP)  [RFCXXXX]
10   Additional Key Exchange 5  (optional in IKE, AH and ESP)  [RFCXXXX]
11   Additional Key Exchange 6  (optional in IKE, AH and ESP)  [RFCXXXX]
12   Additional Key Exchange 7  (optional in IKE, AH and ESP)  [RFCXXXX]

This document also defines a new Notify Message Types in the "Notify Message Types - Status Types" registry:


6. Security Considerations

The key length of the Encryption Algorithm (Transform Type 1), the Pseudorandom Function (Transform Type 2) and the Integrity Algorithm (Transform Type 3), all have to be of sufficient length to prevent attacks using Grover's algorithm [GROVER]. In order to use the extension proposed in this document, the key lengths of these transforms SHALL be at least 256 bits long in order to provide sufficient resistance to quantum attacks. Accordingly the post-quantum security level achieved is at least 128 bits.

SKEYSEED is calculated from shared, KEx, using an algorithm defined in Transform Type 2. While a quantum attacker may learn the value of KEx', if this value is obtained by means of a classical key exchange, other KEx values generated by means of a quantum-resistant algorithm ensure that the final SKEYSEED is not compromised. This assumes that the algorithm defined in the Transform Type 2 is post-quantum.

The main focus of this document is to prevent a passive attacker performing a "harvest and decrypt" attack. In other words, an attacker that records messages exchanges today and proceeds to decrypt them once he owns a quantum computer. This attack is prevented due to the hybrid nature of the key exchange. Other attacks involving an active attacker using a quantum-computer are not completely solved by this document. This is for two reasons.

The first reason is because the authentication step remains classical. In particular, the authenticity of the SAs established under IKEv2 is protected using a pre-shared key, RSA, DSA, or ECDSA algorithms. Whilst the pre-shared key option, provided the key is long enough, is post-quantum, the other algorithms are not. Moreover, in implementations where scalability is a requirement, the pre-shared key method may not be suitable. Quantum-safe authenticity may be provided by using a quantum-safe digital signature and several quantum-safe digital signature methods are being explored by IETF. For example, if the implementation is able to reliably track state, the hash based method, XMSS has the status of an RFC, see [RFC8391]. Currently, quantum-safe authentication methods are not specified in this document, but are planned to be incorporated in due course.

It should be noted that the purpose of post-quantum algorithms is to provide resistance to attacks mounted in the future. The current threat is that encrypted sessions are subject to eavesdropping and archived with decryption by quantum computers taking place at some point in the future. Until quantum computers become available there is no point in attacking the authenticity of a connection because there are no possibilities for exploitation. These only occur at the time of the connection, for example by mounting a MitM attack. Consequently there is not such a pressing need for quantum-safe authenticity.

This draft does not attempt to address key exchanges with KE payloads longer than 64k; the current IKE payload format does not allow that as a possibility. If such huge KE payloads are required, a work around (such as making the KE payload a URL and a hash of the real payload) would be needed. At the current time, it appears likely that there will be plenty of key exchanges available that would not require such a workaround.

7. References

7.1. Normative References

[I-D.smyslov-ipsecme-ikev2-aux] Smyslov, V., "Intermediate Exchange in the IKEv2 Protocol", Internet-Draft draft-smyslov-ipsecme-ikev2-aux-02, December 2018.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC7296] Kaufman, C., Hoffman, P., Nir, Y., Eronen, P. and T. Kivinen, "Internet Key Exchange Protocol Version 2 (IKEv2)", STD 79, RFC 7296, DOI 10.17487/RFC7296, October 2014.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017.

7.2. Informative References

[GROVER] Grover, L., "A Fast Quantum Mechanical Algorithm for Database Search", Proc. of the Twenty-Eighth Annual ACM Symposium on the Theory of Computing (STOC 1996), 1996.
[I-D.ietf-ipsecme-qr-ikev2] Fluhrer, S., McGrew, D., Kampanakis, P. and V. Smyslov, "Postquantum Preshared Keys for IKEv2", Internet-Draft draft-ietf-ipsecme-qr-ikev2-05, December 2018.
[RFC4302] Kent, S., "IP Authentication Header", RFC 4302, DOI 10.17487/RFC4302, December 2005.
[RFC4303] Kent, S., "IP Encapsulating Security Payload (ESP)", RFC 4303, DOI 10.17487/RFC4303, December 2005.
[RFC7383] Smyslov, V., "Internet Key Exchange Protocol Version 2 (IKEv2) Message Fragmentation", RFC 7383, DOI 10.17487/RFC7383, November 2014.
[RFC8229] Pauly, T., Touati, S. and R. Mantha, "TCP Encapsulation of IKE and IPsec Packets", RFC 8229, DOI 10.17487/RFC8229, August 2017.
[RFC8391] Huelsing, A., Butin, D., Gazdag, S., Rijneveld, J. and A. Mohaisen, "XMSS: eXtended Merkle Signature Scheme", RFC 8391, DOI 10.17487/RFC8391, May 2018.


The authors would like to thanks Frederic Detienne and Olivier Pelerin for their comments and suggestions, including the idea to negotiate the post-quantum algorithms using the existing KE payload.

Authors' Addresses

C. Tjhai Post-Quantum EMail:
M. Tomlinson Post-Quantum EMail:
G. Bartlett Cisco Systems EMail:
S. Fluhrer Cisco Systems EMail:
D. Van Geest ISARA Corporation EMail:
O. Garcia-Morchon Philips EMail:
Valery Smyslov ELVIS-PLUS EMail: