OPSAWG H. Song, Ed.
Internet-Draft Futurewei
Intended status: Informational Z. Li
Expires: December 14, 2019 T. Zhou
F. Qin
China Mobile
J. Shin
SK Telecom
J. Jin
June 12, 2019

In-situ Flow Information Telemetry Framework


In-situ Flow Information Telemetry (iFIT) is a framework for applying data plane telemetry techniques such as In-situ OAM (iOAM) and Postcard-Based Telemetry (PBT). It enumerates several key components and describes how these components are assembled to achieve a complete working solution for on-path user traffic telemetry in carrier networks.

Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119][RFC8174] when, and only when, they appear in all capitals, as shown here.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on December 14, 2019.

Copyright Notice

Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

1. Introduction

Application-aware network operation is important for user SLA compliance, service path enforcement, fault diagnosis, and network resource optimization. In-situ OAM (IOAM) and PBT provide the direct experience of user traffic. These techniques are invaluable for application-aware network operations in not only data center and enterprise networks but also carrier networks.

However, successfully applying such techniques in carrier networks poses several practical challenges:

To address these challenges, we propose a framework based on our prototype experience which can help to build a workable data-plane telemetry solution. We name the framework "In-situ Flow Information Telemetry" (iFIT) to reflect the fact that this framework is dedicated to the telemetry data about user/application flow experience. In future, other related data plane OAM techniques such as IPFPM can also be integrated into iFIT to provide richer capabilities. The network architecture that applies iFIT is shown in Figure 1. The key components of iFIT is listed as follows:

			  |                                 |
			  |        iFIT Applications        |
                          |                                 |
                                 ^                    ^
                                 |                    | 
				 V                    | 
                          +------------+        +-----+-----+ 
                          |            |        |           | 
                          | Controller |        | Collector | 
                          |            |        |           | 
                          +-----:------+        +-----------+ 
			        :                     ^ 
				:configuration        |telemetry data
		                :                     | 
                 :             :                 :    |         :
		 :   +---------:---+-------------:---++---------:---+
		 :   |         :   |             :   |          :   |
	         V   |         V   |             V   |          V   |
              +------+-+     +-----+--+       +------+-+     +------+-+
    usr pkts  | iFIT   |     | Path   |       | Path   |     | iFIT   |
         ====>| Head   |====>| Node   |==//==>| Node   |====>| End    |====>
              | Node   |     | A      |       | B      |     | Node   |
              +--------+     +--------+       +--------+     +--------+

Figure 1: iFIT Architecture

In the remaining of the document, we provide the detailed discussion of the iFIT's components.

2. Smart Flow and Data Selection

In most cases, it is impractical to enable the data collection for all the flows and for all the packets in a flow due to the potential performance and bandwidth impacts. Therefore, a workable solution must select only a subset of flows and flow packets to enable the data collection, even though this means the loss of some information.

In data plane, the Access Control List (ACL) provides an ideal means to determine the subset of flow(s). [I-D.song-ippm-ioam-data-validation-option] describes how one can set a sample rate or probability to a flow to allow only a subset of flow packets to be monitored, how one can collect different set of data for different packets, and how one can disable or enable data collection on any specific network node. The document further introduces enhancement to IOAM to allow any node to accept or deny the data collection in full or partially.

Based on these flexible mechanisms, iFIT allows applications to apply smart flow and data selection policies to suit the requirements. The applications can dynamically change the policies at any time based on the network load, processing capability, focus of interest, and any other criteria. We have developed some adaptive algorithm which can limit the performance impact and yet achieve the satisfactory telemetry data density.

3. Export Data Reduction

The flow telemetry data can catch the dynamics of the network and the interactions between user traffic and network. Nevertheless, the data inevitably contain redundancy. It is advisable to remove the redundancy from the data in order to reduce the data transport bandwidth and server processing load.

In addition to efficiently encode the export data (e.g., IPFIX or protobuf), iFIT can also cache the data and send the accumulated data in batch if the data is not time sensitive. Various deduplication and compression techniques can be applied on the batch data.

From the application perspective, an application may only be interested in some special events which can be derived from the telemetry data. For example, in case that the forwarding delay of a packet exceeds a threshold or a flow changes its forwarding path is of interest, it is unnecessary to send the original raw data to the data collecting and processing servers. Rather, iFIT takes advantage of the in-network computing capability of network devices to process the raw data and only push the event notifications to the subscribing applications.

4. Dynamic Network Probe

Due to the limited data plane resource, it is unlikely one can provide all the data all the time. On the other hand, the data needed by applications may be arbitrary but ephemeral. It is critical to meet the dynamic data requirements with limited resource.

Fortunately, data plane programmability allows iFit to dynamically load new data probes. These on-demand probes are called Dynamic Network Probes (DNP). DNP is the technique to enable probes for customized data collection in different network planes. When working with IOAM or PBT, DNP is loaded to the data plane through incremental programming or configuration. The DNP can effectively conduct data generation, processing, and aggregation.

DNP introduces enough flexibility and extensibility to iFIT. It can implement the optimizations for export data reduction motioned in the previous section. It can also generate custom data as required by today and tomorrow's applications.

5. Encapsulation and Tunnel Modes

Since MPLS and IPv4 network are still prevalent in carrier networks. iFIT provides solutions to apply IOAM and PBT in such networks. PBT-M does not introduce new headers to the packets so the trouble of encapsulation for IOAM and PBT-I is avoided. If IOAM or PBT-I is preferred, [I-D.song-mpls-extension-header] provides a means to encapsulate the extra header using an MPLS extension header. As for IPv4, it is possible to encapsulate the IOAM or PBT-I header in an IP option. For example, RAO can be used to indicate the presence of the new header.

In carrier networks, it is common for user traffic to traverse various tunnels for QoS, traffic engineering, or security. iFIT supports both the uniform mode and the pipe mode for tunnel support as described in [I-D.song-ippm-ioam-tunnel-mode]. With such flexibility, the operator can either gain a true end-to-end visibility or apply a hierarchical approach which isolates the monitoring domain between customer and provider.

6. On-demand Technique Selection and Integration

With multiple underlying data collection and export techniques at its disposal, iFIT can flexibly adapt to different network conditions and different application requirements.

For example, depending on the types of data that are of interest, iFIT may choose either IOAM or PBT to collect the data; if an application needs to track down where the packets are lost, it may switch from IOAM to PBT.

iFIT can further integrate multiple data plane monitoring and measurement techniques together and present a comprehensive data plane telemetry solution to network operating applications.

7. Summary and Future Work

Combining with algorithmic and architectural components, iFIT framework enables a practical solution based on existing techniques such as IOAM and PBT for user traffic telemetry in carrier networks.

There are many more challenges and corresponding solutions for iFIT that we did not cover in the current version of this document. For example, how the telemetry data are stored, analyzed, and visualized; how the telemetry data interfaces and work with the network operation applications which run machine learning and big data analytic algorithms; and ultimately, how iFIT can support closed control loops for autonomous networking? A complete iFIT framework should also consider the cross-domain operations. We leave these topics for future revisions.

8. Security Considerations


9. IANA Considerations

This document includes no request to IANA.

10. Contributors


11. Acknowledgments


12. References

12.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017.

12.2. Informative References

[I-D.brockners-inband-oam-data] Brockners, F., Bhandari, S., Pignataro, C., Gredler, H., Leddy, J., Youell, S., Mizrahi, T., Mozes, D., Lapukhov, P., Chang, R. and d. daniel.bernier@bell.ca, "Data Fields for In-situ OAM", Internet-Draft draft-brockners-inband-oam-data-07, July 2017.
[I-D.song-ippm-ioam-data-validation-option] Song, H. and T. Zhou, "In-situ OAM Data Validation Option", Internet-Draft draft-song-ippm-ioam-data-validation-option-02, April 2018.
[I-D.song-ippm-ioam-tunnel-mode] Song, H., Li, Z., Zhou, T. and Z. Wang, "In-situ OAM Processing in Tunnels", Internet-Draft draft-song-ippm-ioam-tunnel-mode-00, June 2018.
[I-D.song-ippm-postcard-based-telemetry] Song, H., Zhou, T., Li, Z. and J. Shin, "Postcard-based On-Path Flow Data Telemetry", Internet-Draft draft-song-ippm-postcard-based-telemetry-03, April 2019.
[I-D.song-mpls-extension-header] Song, H., Li, Z., Zhou, T. and L. Andersson, "MPLS Extension Header", Internet-Draft draft-song-mpls-extension-header-02, February 2019.
[I-D.song-opsawg-dnp4iq] Song, H. and J. Gong, "Requirements for Interactive Query with Dynamic Network Probes", Internet-Draft draft-song-opsawg-dnp4iq-01, June 2017.
[RFC2113] Katz, D., "IP Router Alert Option", RFC 2113, DOI 10.17487/RFC2113, February 1997.
[RFC7011] Claise, B., Trammell, B. and P. Aitken, "Specification of the IP Flow Information Export (IPFIX) Protocol for the Exchange of Flow Information", STD 77, RFC 7011, DOI 10.17487/RFC7011, September 2013.
[RFC8321] Fioccola, G., Capello, A., Cociglio, M., Castaldelli, L., Chen, M., Zheng, L., Mirsky, G. and T. Mizrahi, "Alternate-Marking Method for Passive and Hybrid Performance Monitoring", RFC 8321, DOI 10.17487/RFC8321, January 2018.

Authors' Addresses

Haoyu Song (editor) Futurewei 2330 Central Expressway Santa Clara, USA EMail: hsong@futurewei.com
Zhenbin Li Huawei 156 Beiqing Road Beijing, 100095, P.R. China EMail: lizhenbin@huawei.com
Tianran Zhou Huawei 156 Beiqing Road Beijing, 100095, P.R. China EMail: zhoutianran@huawei.com
Fengwei Qin China Mobile No. 32 Xuanwumenxi Ave., Xicheng District Beijing, 100032, P.R. China EMail: qinfengwei@chinamobile.com
Jongyoon Shin SK Telecom South Korea EMail: jongyoon.shin@sk.com
Jaewhan Jin LG U+ South Korea EMail: daenamu1@lguplus.co.kr