Network Working Group J. Reschke
Internet-Draft greenbytes
Intended status: Standards Track April 4, 2008
Expires: October 6, 2008
The Hypertext Transfer Protocol (HTTP) GET-Location header
draft-reschke-http-get-location-01
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on October 6, 2008.
Abstract
Several hypertext transfer protocol (HTTP) extensions use methods
other than GET to expose information. This has the drawback that
this kind of information is harder to identify (missing a URL to
which a GET request could be applied) and to cache.
This document specifies a simple extension header through which a
server can advertise a substitute URL that an HTTP client
subsequently can use with the GET method.
Editorial Note (To be removed by RFC Editor before publication)
Distribution of this document is unlimited. Please send comments to
Reschke Expires October 6, 2008 [Page 1]
Internet-Draft HTTP GET-Location Header April 2008
the Hypertext Transfer Protocol (HTTP) mailing list at
ietf-http-wg@w3.org [1], which may be joined by sending a message
with subject "subscribe" to ietf-http-wg-request@w3.org [2].
Discussions of the HTTP working group are archived at
.
XML versions, latest edits and the issues list for this document are
available from
.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Notational Conventions . . . . . . . . . . . . . . . . . . . . 4
3. The 'GET-Location' Header . . . . . . . . . . . . . . . . . . 4
4. Security Considerations . . . . . . . . . . . . . . . . . . . 6
5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 6
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 6
7. References . . . . . . . . . . . . . . . . . . . . . . . . . . 6
7.1. Normative References . . . . . . . . . . . . . . . . . . . 6
7.2. Informative References . . . . . . . . . . . . . . . . . . 7
Appendix A. Examples . . . . . . . . . . . . . . . . . . . . . . 7
A.1. WebDAV Collection Membership . . . . . . . . . . . . . . . 7
A.2. WebDAV Custom Properties . . . . . . . . . . . . . . . . . 11
A.3. DeltaV Version History Report . . . . . . . . . . . . . . 13
Appendix B. Related HTTP features . . . . . . . . . . . . . . . . 14
B.1. Status 303 . . . . . . . . . . . . . . . . . . . . . . . . 14
B.2. Content-Location Header . . . . . . . . . . . . . . . . . 15
B.3. Location header . . . . . . . . . . . . . . . . . . . . . 15
Appendix C. Alternate Approaches . . . . . . . . . . . . . . . . 15
C.1. Link Relation . . . . . . . . . . . . . . . . . . . . . . 15
C.2. Multistatus Body Extension . . . . . . . . . . . . . . . . 16
Appendix D. Open Issues . . . . . . . . . . . . . . . . . . . . . 17
D.1. Content Negotiation on GET-Location . . . . . . . . . . . 17
D.2. Using URI Templates rather than URIs . . . . . . . . . . . 17
D.3. Extensions . . . . . . . . . . . . . . . . . . . . . . . . 17
Appendix E. Change Log (to be removed by RFC Editor before
publication) . . . . . . . . . . . . . . . . . . . . 17
E.1. Since draft-reschke-http-get-location-00 . . . . . . . . . 18
Appendix F. Resolved issues (to be removed by RFC Editor
before publication) . . . . . . . . . . . . . . . . . 18
F.1. status-codes . . . . . . . . . . . . . . . . . . . . . . . 18
F.2. non-get . . . . . . . . . . . . . . . . . . . . . . . . . 18
Appendix G. Open issues (to be removed by RFC Editor prior to
publication) . . . . . . . . . . . . . . . . . . . . 18
G.1. edit . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Reschke Expires October 6, 2008 [Page 2]
Internet-Draft HTTP GET-Location Header April 2008
G.2. content-location . . . . . . . . . . . . . . . . . . . . . 19
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 19
Intellectual Property and Copyright Statements . . . . . . . . . . 20
Reschke Expires October 6, 2008 [Page 3]
Internet-Draft HTTP GET-Location Header April 2008
1. Introduction
Several HTTP ([RFC2616]) extensions use methods other than GET to
expose information. This has the drawback that this kind of
information is harder to identify (missing a URL to which a GET
request could be applied) and to cache.
This document specifies a simple extension header through which a
server can advertise a substitute URL that an HTTP client
subsequently can use with the GET method.
2. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL-NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
The terminology used here follows and extends that in the HTTP
specification [RFC2616].
3. The 'GET-Location' Header
The GET-Location entity header identifies a substitute resource that
can be used in subsequent requests for the same information, but
using the GET method.
Note that, by definition, the GET-Location header can only used on
responses to safe methods.
Reschke Expires October 6, 2008 [Page 4]
Internet-Draft HTTP GET-Location Header April 2008
Syntax (using the the augmented Backus-Naur Form (BNF) defined in
Section 2.1 of [RFC2616]):
GET-Location = "GET-Location" ":" "<" Simple-ref ">"
*( ";" location-directive ) )
location-directive = "etag=" entity-tag
| "max-age" "=" delta-seconds
| location-extension
location-extension = token [ "=" ( token | quoted-string ) ]
Simple-ref = absolute-URI | ( path-absolute [ "?" query ] )
absolute-URI =
delta-seconds =
entity-tag =
path-absolute =
quoted-string =
query =
token =
Where:
Simple-ref Contains either the URI or the absolute path of the
location.
etag The server can include the entity tag for the returned entity,
if it would have been retrieved by a GET request to the substitute
resource. Note that this is different from the value of the
"ETag" header which could also be included in the response, but
which would apply to the resource identified by the Request-URI.
max-age Specifies a lifetime for the information returned by this
header. A client MUST discard any information related to this
header after the specified amount of time.
The freshness lifetime for the information obtained from the GET-
Location header does not depend on the cacheability of the response
it was obtained from (which, in general, may not be cacheable at
all). The "max-age" directive allows the server to specify after how
many seconds a client should discard knowledge about the alternate
resource. In absence of that header, clients SHOULD discard the
information after 3600 seconds.
There is no direct relation between the status code of the HTTP
response that included GET-Location and the status codes for
subsequent GET requests on the substitute resource. For instance,
Reschke Expires October 6, 2008 [Page 5]
Internet-Draft HTTP GET-Location Header April 2008
GET-Location could be included in a 207 response to PROPFIND
([RFC4918], Section 9.1), but the response code for a succesful GET
on the substitute resource would usually be 200.
Note that servers may, but are not required to support methods other
than GET or head on the substitute resource.
4. Security Considerations
This specification introduces no new security considerations beyond
those discussed in Section 15 of [RFC2616].
5. IANA Considerations
This document specifies the new HTTP header listed below, to be added
to the permanent registry (see [RFC3864]).
Header field name: GET-Location
Applicable protocol: http
Status: standard
Author/Change controller: IETF
Specification document: Section 3 of this specification
6. Acknowledgments
This document has benefited from thoughtful discussion by Stefan
Eissing and Henrik Nordstrom.
7. References
7.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Reschke Expires October 6, 2008 [Page 6]
Internet-Draft HTTP GET-Location Header April 2008
Resource Identifier (URI): Generic Syntax", RFC 3986,
January 2005.
7.2. Informative References
[RFC2068] Fielding, R., Gettys, J., Mogul, J., Nielsen, H., and T.
Berners-Lee, "Hypertext Transfer Protocol -- HTTP/1.1",
RFC 2068, January 1997.
[RFC3253] Clemm, G., Amsden, J., Ellison, T., Kaler, C., and J.
Whitehead, "Versioning Extensions to WebDAV", RFC 3253,
March 2002.
[RFC3864] Klyne, G., Nottingham, M., and J. Mogul, "Registration
Procedures for Message Header Fields", BCP 90, RFC 3864,
September 2004.
[RFC4918] Dusseault, L., Ed., "HTTP Extensions for Web Distributed
Authoring and Versioning (WebDAV)", RFC 4918, June 2007.
[draft-gregorio-uritemplate]
Gregorio, J., Ed., Hadley, M., Ed., Nottingham, M., Ed.,
and D. Orchard, "URI Template",
draft-gregorio-uritemplate-03 (work in progress),
March 2008.
URIs
[1]
[2]
Appendix A. Examples
A.1. WebDAV Collection Membership
In this example the client uses the WebDAV PROPFIND method ("HTTP
Extensions for Web Distributed Authoring and Versioning", [RFC4918],
Section 9.1) to get a list of all collection members, along with
their DAV:resourcetype property ([RFC4918], Section 15.9):
Reschke Expires October 6, 2008 [Page 7]
Internet-Draft HTTP GET-Location Header April 2008
>>Request
PROPFIND /collection/ HTTP/1.1
Host: example.com
Depth: 1
Content-Type: application/xml
The response contains the requested information, plus the GET-
Location header, identifying a separate resource which can provide
the same information using the HTTP GET method:
>>Response
HTTP/1.1 207 Multi-Status
Content-Type: application/xml
GET-Location: ; etag="123";
max-age=3600
/collection/
HTTP/1.1 200 OK
/collection/member
HTTP/1.1 200 OK
The response provided the URL of the substitute resource, so when the
client wishes to refresh the collection information, it uses that
URI. The response contained the entity tag for the data being
Reschke Expires October 6, 2008 [Page 8]
Internet-Draft HTTP GET-Location Header April 2008
returned, so it can make the request conditional:
>>Request
GET /collection/;members HTTP/1.1
Host: example.com
Accept: application/xml
If-None-Match: "123"
The information did not change, so the server does not need to return
new data:
>>Response
HTTP/1.1 304 Not Modified
Later on, the client tries again. This time, however, a second
member has been added:
>>Request
GET /collection/;members HTTP/1.1
Host: example.com
Accept: application/xml
If-None-Match: "123"
Reschke Expires October 6, 2008 [Page 9]
Internet-Draft HTTP GET-Location Header April 2008
>>Response
HTTP/1.1 200 OK
Content-Type: application/xml
ETag: "124"
/collection/
HTTP/1.1 200 OK
/collection/member
HTTP/1.1 200 OK
/collection/member2
HTTP/1.1 200 OK
Finally, the collection has been removed by somebody else. The
client tries a refresh:
>>Request
GET /collection/;members HTTP/1.1
Host: example.com
Accept: application/xml
If-None-Match: "124"
Reschke Expires October 6, 2008 [Page 10]
Internet-Draft HTTP GET-Location Header April 2008
>>Response
HTTP/1.1 404 Not Found
Note that it may be hard to compute entity tags for more complex
PROPFIND responses. For instance, most properties depend on the
state of the collection member, not the state of the collection
itself, and thus the response will change even though the state of
the collection itself did not change.
This is why this extension leaves it to the server whether to return
a GET-Location at all, and if so, whether to return cache validators
along with it.
A.2. WebDAV Custom Properties
Here, the client uses the WebDAV PROPFIND method ([RFC4918], Section
9.1) to obtain a custom property:
>>Request
PROPFIND /collection/member HTTP/1.1
Host: example.com
Depth: 0
Content-Type: application/xml
Reschke Expires October 6, 2008 [Page 11]
Internet-Draft HTTP GET-Location Header April 2008
>>Response
HTTP/1.1 207 Multi-Status
Content-Type: application/xml
GET-Location: ; etag="1"
/collection/member
Document Title
HTTP/1.1 200 OK
>>Request
GET /collection/member;prop=title HTTP/1.1
Host: example.com
If-None-Match: "1"
>>Response
HTTP/1.1 304 Not Modified
Later, the request is repeated after the title property indeed
changed...:
>>Request
GET /collection/member;prop=title HTTP/1.1
Host: example.com
If-None-Match: "1"
Reschke Expires October 6, 2008 [Page 12]
Internet-Draft HTTP GET-Location Header April 2008
>>Response
HTTP/1.1 200 OK
Content-Type: application/xml
ETag: "2"
/collection/member
New Document Title
HTTP/1.1 200 OK
Although this example may look like every WebDAV property would need
a separate entity tag, this is of course not the case. For instance,
a server that stores all custom properties in a single place (like a
properties file) could use the same computation for the entity tag
for all properties. Also, it could implement resources representing
multiple custom property values the same way.
A.3. DeltaV Version History Report
Here, the client uses the DeltaV DAV:version-tree report ("Versioning
Extensions to WebDAV", [RFC3253], Section 3.7) to obtain the members
of the version history of a version-controlled resource.
>>Request
REPORT /collection/member HTTP/1.1
Host: example.com
Depth: 0
Content-Type: application/xml
Reschke Expires October 6, 2008 [Page 13]
Internet-Draft HTTP GET-Location Header April 2008
>>Response
HTTP/1.1 207 Multi-Status
Content-Type: application/xml
GET-Location:
/version-storage/12345/V1
HTTP/1.1 200 OK
/version-storage/12345/V2
HTTP/1.1 200 OK
Note that in this case, the substitute resource can be almost
identical to the one from the PROPFIND/Depth:1 example: the only
difference being that the report result does not contain a DAV:
response element for the collection itself.
Appendix B. Related HTTP features
This section discusses some related HTTP features and explains why
the author feels that they can't be used for the given use case.
B.1. Status 303
Section 10.3.4 of [RFC2616] defines the status code 303 (See Other):
The response to the request can be found under a different URI and
SHOULD be retrieved using a GET method on that resource. This
method exists primarily to allow the output of a POST-activated
script to redirect the user agent to a selected resource. The new
URI is not a substitute reference for the originally requested
resource. The 303 response MUST NOT be cached, but the response
Reschke Expires October 6, 2008 [Page 14]
Internet-Draft HTTP GET-Location Header April 2008
to the second (redirected) request might be cacheable.
On first glance, it may look as if this addresses exactly the given
use case. However:
1. It says: "The new URI is not a substitute reference for the
originally requested resource. The 303 response MUST NOT be
cached, but the response to the second (redirected) request might
be cacheable." That is, the information about the alternate
resource is not cacheable.
2. Servers returning a 303 status instead of the one expected by the
client, such as 207 Multistatus, would likely break existing
clients.
B.2. Content-Location Header
Section 14.14 of [RFC2616] states:
The Content-Location value is not a replacement for the original
requested URI; it is only a statement of the location of the
resource corresponding to this particular entity at the time of
the request. (...)
However, the purpose of "GET-Location" is to enable the server to
provide a permanent replacement URI.
B.3. Location header
Section 14.30 of [RFC2616] states:
The Location response-header field is used to redirect the
recipient to a location other than the Request-URI for completion
of the request or identification of a new resource. (...)
Neither of these cases ("redirect to a location for completion of the
request" and "identification of a new resource") matches the use case
"GET-Location" covers.
Appendix C. Alternate Approaches
C.1. Link Relation
An alternative to introducing a new header would be to re-use an
existing header, such as the Link header defined in Section 19.6.2 of
[RFC2068]. Note that this still would require registering a link
relation.
Reschke Expires October 6, 2008 [Page 15]
Internet-Draft HTTP GET-Location Header April 2008
The example from Appendix A.1 would then read like this:
Link: ;
rel=getlocation; etag="123"; max-age=3600
C.2. Multistatus Body Extension
Observing that the whole proposal tries to deal with WebDAV related
shortcomings, it may make sense to constrain the solution to WebDAV
response bodies, thereby not having to introduce anything that would
be visible outside WebDAV.
A very simple approach would be to embed the information in the DAV:
multistatus ([RFC4918], Section 14.16) response body.
Re-using the example in Appendix A.1, this could look like this:
HTTP/1.1 207 Multi-Status
Content-Type: application/xml
/collection/;members
"123"
3600
/collection/
HTTP/1.1 200 OK
/collection/member
HTTP/1.1 200 OK
Reschke Expires October 6, 2008 [Page 16]
Internet-Draft HTTP GET-Location Header April 2008
Appendix D. Open Issues
D.1. Content Negotiation on GET-Location
Should it be possible to use Content Negotiation on the resource
identified by GET-Location? A use case could be a metadata provider
that would support different formats, such as WebDAV's multistatus
format (MIME type missing!), RDF, JSON, whatever.
This could be done using a location-extension specifying the Accept
header for the GET operation.
D.2. Using URI Templates rather than URIs
Should we allow servers to return URI templates
([draft-gregorio-uritemplate]), so that clients can compute
substitute URLs for other requests as well?
For instance, this could be done by allowing a URI template instead
of the Simple-ref, and to return another template specifying how to
derive the template variable from the Request-URI:
>>Request
PROPFIND /documents/a/b HTTP/1.1
Host: example.com
Depth: 0
Content-Type: application/xml
>>Response
HTTP/1.1 207 Multi-Status
Content-Type: application/xml
GET-Location: ; path-template=
...
So in this case, the actual URI to be used would be
.
D.3. Extensions
Do we need a registry for new location-directive values?
Appendix E. Change Log (to be removed by RFC Editor before publication)
Reschke Expires October 6, 2008 [Page 17]
Internet-Draft HTTP GET-Location Header April 2008
E.1. Since draft-reschke-http-get-location-00
Add and resolve issues "non-get" and "status-codes". Add issue
"content-location". Add "Acknowledgments" Section. Update uri-
template reference. Discuss more alternative approaches: Link
header, Multistatus body extension.
Appendix F. Resolved issues (to be removed by RFC Editor before
publication)
Issues that were either rejected or resolved in this version of this
document.
F.1. status-codes
In Section 3:
Type: edit
julian.reschke@greenbytes.de (2007-07-31): Explain the relation
between the status code GET-Location comes with, and the status codes
for GET requests on the substitute resource.
Resolution (2008-03-14): Add clarification.
F.2. non-get
In Section 3:
Type: edit
julian.reschke@greenbytes.de (2007-08-05): Say something about non
GET/HEAD requests to the substitute resource.
Resolution (2008-03-14): Add clarification.
Appendix G. Open issues (to be removed by RFC Editor prior to
publication)
G.1. edit
Type: edit
julian.reschke@greenbytes.de (2007-07-27): Umbrella issue for
editorial fixes/enhancements.
Reschke Expires October 6, 2008 [Page 18]
Internet-Draft HTTP GET-Location Header April 2008
G.2. content-location
In Section B.2:
Type: edit
julian.reschke@greenbytes.de (2008-03-14):
In http://lists.w3.org/Archives/Public/ietf-http-wg/2007JulSep/
0184.html, Roy Fielding points out that the statement about Content-
Location is out-of context; and that Content-Location indeed should
be used for this use case.
In this case, other information defined in GET-Location would still
be missing, such as validatity and etag information (see response in
http://lists.w3.org/Archives/Public/ietf-http-wg/2007JulSep/
0195.html).
So would it make sense to use Content-Location instead, and move the
optional fields defined in GET-Location somewhere else? Or would
Content-Location alone be sufficient (which proper instructions how
to use it with methods like PROPFIND and REPORT)?
Author's Address
Julian F. Reschke
greenbytes GmbH
Hafenweg 16
Muenster, NW 48155
Germany
Phone: +49 251 2807760
Email: julian.reschke@greenbytes.de
URI: http://greenbytes.de/tech/webdav/
Reschke Expires October 6, 2008 [Page 19]
Internet-Draft HTTP GET-Location Header April 2008
Full Copyright Statement
Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
Reschke Expires October 6, 2008 [Page 20]