Precis P. Saint-Andre
Internet-Draft Cisco Systems, Inc.
Obsoletes: 4013 (if approved) A. Melnikov
Intended status: Standards Track Isode Ltd
Expires: March 15, 2013 September 13, 2012

Preparation and Comparison of Internationalized Strings Representing Simple User Names and Passwords
draft-melnikov-precis-saslprepbis-02

Abstract

This document describes how to handle Unicode strings representing simple user names and passwords, primarily for purposes of comparison. This profile is intended to be used by Simple Authentication and Security Layer (SASL) mechanisms (such as PLAIN and SCRAM-SHA-1), as well as other protocols that exchange simple user names or passwords. This document obsoletes RFC 4013.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http:/⁠/⁠datatracker.ietf.org/⁠drafts/⁠current/⁠.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on March 15, 2013.

Copyright Notice

Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http:/⁠/⁠trustee.ietf.org/⁠license-⁠info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

1.1. Overview

User names and passwords are used pervasively in authentication and authorization on the Internet. To increase the likelihood that the input and comparison of user names and passwords will work in ways that make sense for typical users throughout the world, this document defines rules for preparing and comparing internationalized strings that represent simple user names and passwords.

The algorithms defined in this document assume that all strings are comprised of characters from the Unicode character set [UNICODE].

The algorithms are designed for use in Simple Authentication and Security Layer (SASL) [RFC4422] mechanisms, such as PLAIN [RFC4616] and SCRAM-SHA-1 [RFC5802]. However, they might be applicable wherever simple user names or passwords are used. This profile is not intended for use in preparing strings that are not simple user names (e.g., email addresses, DNS domain names, LDAP distinguished names), nor in cases where identifiers or secrets are not character data (e.g., keys) or require different handling (e.g., case folding).

This document builds upon the PRECIS framework defined in [FRAMEWORK], which differs fundamentally from the stringprep technology [RFC3454] used in SASLprep [RFC4013]. The primary difference is that stringprep profiles allowed all characters except those which were explicitly disallowed, whereas PRECIS profiles disallow all characters except those which are explicitly allowed (this "inclusion model" was originally used for internationalized domain names in [RFC5891]; see [RFC5894] for further discussion). It is important to keep this distinction in mind when comparing the technology defined in this document to SASLprep [RFC4013].

This document obsoletes RFC 4013.

1.2. Terminology

Many important terms used in this document are defined in [FRAMEWORK], [RFC4422], [RFC5890], [RFC6365], and [UNICODE]. The term "non-ASCII" space refers to any Unicode code point with a general category of "Zs", with the exception of U+0020 (here called "ASCII space").

As used here, the term "password" is not literally limited to a word; i.e., a password could be a passphrase consisting of more than one word, perhaps separated by spaces or other such characters.

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

2. Simple User Names

2.1. Definition

Some SASL mechanisms (e.g., CRAM-MD5, DIGEST-MD5, and SCRAM) specify that the authentication identity used in the context of such mechanisms is a "simple user name" (see Section 2 of [RFC4422] as well as [RFC4013]). However, the exact form of a simple user name in any particular mechanism or deployment thereof is a local matter, and a simple user name does not necessarily map to an application identifier such as the localpart of an email address.

For purposes of preparation and comparison of authentication identities, this document specifies that a simple user name is a string of [UNICODE] code points, encoded using UTF-8 [RFC3629], and structured as an ordered sequence of "simpleparts" (where the complete simple user name can consist of a single simplepart or a space-separated sequence of simpleparts).

Therefore the syntax for a simple user name is defined as follows using the Augmented Backus-Naur Form (ABNF) as specified in [RFC5234].

   simpleusername = simplepart [1*(1*SP simplepart)]
   simplepart     = 1*(namepoint)
                    ;
                    ; a "namepoint" is a UTF-8 encoded 
                    ; Unicode code point that conforms to
                    ; the "NameClass" string class defined
                    ; in draft-ietf-precis-framework
                    ;
        

2.2. Preparation

A simple user name MUST NOT be zero bytes in length. This rule is to be enforced after any normalization or mapping of code points.

Each simplepart of a simple user name MUST be treated as follows, where the operations specified MUST be completed in the order shown:

  1. Apply Unicode Normalization Form C (NFC) to all characters.

  2. Map uppercase and titlecase characters to their lowercase equivalents.

  3. Optionally apply additional mappings, such as those defined in [MAPPINGS].

  4. Ensure that the resulting string conforms to the definition of the PRECIS NameClass.

With regard to directionality, the "Bidi Rule" provided in [RFC5893] applies.

2.3. Migration

The rules defined in the previous section differ slightly from those defined by the SASLprep specification [RFC4013]. Therefore, deployments that currently use SASLprep for handling user names will need to scrub existing data when migrating to use of the rules defined here. In particular:

Note well that all code points and blocks not explicitly allowed in the PRECIS NameClass are disallowed; this includes private use characters, surrogate code points, and the other code points and blocks defined as "Prohibited Output" in Section 2.3 of RFC 4013.

3. Passwords

3.1. Definition

For purposes of preparation and comparison of passwords, this document specifies that a password is a string of [UNICODE] code points, encoded using UTF-8 [RFC3629], and conformant to the PRECIS FreeClass.

Therefore the syntax for a password is defined as follows using the Augmented Backus-Naur Form (ABNF) as specified in [RFC5234].

   password       = 1*(freepoint)
                    ;
                    ; a "freepoint" is a UTF-8 encoded
                    ; Unicode code point that conforms to
                    ; the "FreeClass" string class defined
                    ; in draft-ietf-precis-framework
                    ;
        

3.2. Preparation

A password MUST NOT be zero bytes in length. This rule is to be enforced after any normalization or mapping of code points.

A password MUST be treated as follows, where the operations specified MUST be completed in the order shown:

  1. Apply Unicode Normalization Form C (NFC) to all characters.

  2. Map any instances of non-ASCII space to ASCII space (U+0020).

  3. Ensure that the resulting string conforms to the definition of the PRECIS FreeClass.

With regard to directionality, the "Bidi Rule" provided in [RFC5893] applies.

3.3. Migration

The rules defined in the previous section differ slightly from those defined by the SASLprep specification [RFC4013]. Depending on local service policy, migration from RFC 4013 to this specification might not involve any scrubbing of data (since passwords might not be stored in the clear anyway); however, service providers need to be aware of possible issues that might arise during migration. In particular:

Note well that all code points and blocks not explicitly allowed in the PRECIS FreeClass are disallowed; this includes private use characters, surrogate code points, and the other code points and blocks defined as "Prohibited Output" in Section 2.3 of RFC 4013.

4. Open Issues

We need to compare the output obtained when applying the new rules with Unicode 3.2 and Unicode 6.1 data to the output obtained when applying the SASLprep rules with Unicode 3.2 data, then make sure that the PRECIS Working Group and KITTEN Working Group are comfortable with any changes to the Unicode characters that are allowed and disallowed. (See also the migration issues described in the foregoing sections.)

5. Security Considerations

5.1. Password/Passphrase Strength

The ability to include a wide range of characters in passwords and passphrases can increase the potential for creating a strong password with high entropy. However, in practice, the ability to include such characters ought to be weighed against the possible need to reproduce them on various devices using various input methods.

5.2. Reuse of PRECIS

The security considerations described in [FRAMEWORK] apply to the "NameClass" and "FreeClass" base string classes used in this document for user names and passwords, respectively.

5.3. Reuse of Unicode

The security considerations described in [UTR39] apply to the use of Unicode characters in user names and passwords.

6. IANA Considerations

6.1. Use of NameClass

The IANA shall add an entry to the PRECIS Usage Registry for reuse of the PRECIS NameClass in SASL, as follows:

Application Protocol:
SASL/Kerberos.
Base Class:
NameClass.
Subclassing:
No.
Directionality:
The "Bidi Rule" defined in RFC 5893 applies.
Casemapping:
Map uppercase and titlecase code points to their lowercase equivalents.
Normalization:
NFC.
Specification:
RFC XXXX.

6.2. Use of FreeClass

The IANA shall add an entry to the PRECIS Usage Registry for reuse of the PRECIS FreeClass in SASL, as follows:

Application Protocol:
SASL/Kerberos.
Base Class:
FreeClass
Subclassing:
No.
Directionality:
The "Bidi Rule" defined in RFC 5893 applies.
Casemapping:
None.
Normalization:
NFC.
Specification:
RFC XXXX.

7. References

7.1. Normative References

[FRAMEWORK] Saint-Andre, P and M Blanchet, "Precis Framework: Handling Internationalized Strings in Protocols", Internet-Draft draft-ietf-precis-framework-05, August 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD 63, RFC 3629, November 2003.
[RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, January 2008.
[UNICODE] The Unicode Consortium, "The Unicode Standard, Version 6.1", 2012.

7.2. Informative References

[MAPPINGS] YONEYA, Y and T NEMOTO, "Mapping characters for PRECIS classes", Internet-Draft draft-yoneya-precis-mappings-02, July 2012.
[RFC3454] Hoffman, P. and M. Blanchet, "Preparation of Internationalized Strings ("stringprep")", RFC 3454, December 2002.
[RFC4013] Zeilenga, K., "SASLprep: Stringprep Profile for User Names and Passwords", RFC 4013, February 2005.
[RFC4422] Melnikov, A. and K. Zeilenga, "Simple Authentication and Security Layer (SASL)", RFC 4422, June 2006.
[RFC4616] Zeilenga, K., "The PLAIN Simple Authentication and Security Layer (SASL) Mechanism", RFC 4616, August 2006.
[RFC5802] Newman, C., Menon-Sen, A., Melnikov, A. and N. Williams, "Salted Challenge Response Authentication Mechanism (SCRAM) SASL and GSS-API Mechanisms", RFC 5802, July 2010.
[RFC5890] Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", RFC 5890, August 2010.
[RFC5891] Klensin, J., "Internationalized Domain Names in Applications (IDNA): Protocol", RFC 5891, August 2010.
[RFC5893] Alvestrand, H. and C. Karp, "Right-to-Left Scripts for Internationalized Domain Names for Applications (IDNA)", RFC 5893, August 2010.
[RFC5894] Klensin, J., "Internationalized Domain Names for Applications (IDNA): Background, Explanation, and Rationale", RFC 5894, August 2010.
[RFC6365] Hoffman, P. and J. Klensin, "Terminology Used in Internationalization in the IETF", BCP 166, RFC 6365, September 2011.
[UTR39] The Unicode Consortium, "Unicode Technical Report #39: Unicode Security Mechanisms", August 2010.

Appendix A. Differences from RFC 4013

The following substantive modifications were made from RFC 3920.

Appendix B. Acknowledgements

Thanks to Yoshiro YONEYA and Takahiro NEMOTO for their implementation feedback.

This document borrows some text from RFC 4013 and RFC 6120.

Authors' Addresses

Peter Saint-Andre Cisco Systems, Inc. 1899 Wynkoop Street, Suite 600 Denver, CO 80202 USA Phone: +1-303-308-3282 EMail: psaintan@cisco.com
Alexey Melnikov Isode Ltd 5 Castle Business Village 36 Station Road Hampton, Middlesex TW12 2BX UK EMail: Alexey.Melnikov@isode.com