Network Working Group J. Levine
Internet-Draft Taughannock Networks
Intended status: Informational September 3, 2016
Expires: March 7, 2017

Publishing Organization Boundaries in the DNS
draft-levine-dbound-dns-01

Abstract

The organization that manages a subtree in the DNS is often different from the one that manages the tree above it. We describe an architecture to publish in the DNS the boundaries between organizations that can be adapted to various policy models and can be queried with a small number of DNS lookups.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on March 7, 2017.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

Often, the organization that manages a subtree in the DNS is different from the one that manages the tree above it. Many applications use information about such boundaries to implement security policies. For example, web browsers use them to limit the names where web cookies can be set, and Secure Socket Layer (SSL) certificate services use them to determine the party responsible for the domain in a signing request. Mail security applications such as Domain-based Messaging Authentication, Reporting and Conformance (DMARC) use them to locate an organization's policy records in the DNS. This specification is intended to provide boundaries usable for DMARC, and possibly for other applications.

[[Please direct discussion of this draft to the dbound working group at dbound@ietf.org.]]

2. Design Issues

Organization boundaries can be assigned on what one could call an opt-in or opt-out basis. "Opt-in" means that two names are only managed by the same organization if both actively assert that they are related. "Opt-out" means that if there is any boundary information at all for a DNS subtree, each name is assumed to be under the same management as its parent unless there is a boundary assertion to the contrary. This design describes an opt-out model.

Within the opt-out model, this design can adapt to a variety of scenarios:

In the lookup process below, the boundary point data is stored in the DNS tree in a new BOUND RRTYPE. The boundary is considered to be directly below the name that the process returns, similarly to the names in the PSL [PSL]. If the process returned "abc.example", then "foo.abc.example" and "bar.abc.example" are separated by the boundary, but "foo.abc.example" and "bar.foo.abc.example" are not.

Each domain can publish its own policies within its own domain name space, or a separate authority can publish a global set of policies in a separate name space.

3. RRTYPE format

The BOUND record contains two 16-bit numeric values and an uncompressed domain name. In a master file, they are written as two decimal values and a domain name.

The first numeric value is a bit mask expressing policy options. The only bits currently assigned is 0x0001 (NOLOWER) which means that no lower level boundaries can exist below this one, and 0x0002 (NOBOUND) which means that this name is not a boundary for this application.

The second numeric value is a number identifying the application to which this boundary applies. The number zero is a default for any applications not otherwise specified, and 1 means the application is DMARC.

4. Lookup Process

In general, the lookup process takes as input a domain name an application number. It returns the name of the boundary node in the DNS. This may be the domain itself or a parent. If there is no policy for the domain the lookup fails; there are no defaults, and the DNS root is not within any organization boundary. (Applications may apply defaults of their own, but that is beyond the scope of this specification.)

Names of boundary information records use the tag "_bound" which is intended to be unique.

For the first lookup, the client extracts the top level component (i.e., the rightmost label, as "label" is defined in Section 3 of [RFC1034]) of the domain name from the subcomponents, if any, and inserts the prefix in front of that component, after other components if any. For example, if the domain to be checked is "example.com" or "www.example.com", the client issues a DNS query for "example._bound.com" or "www.example._bound.com". If the domain is a dotless one such as "example", the client looks up "_bound.example".

The client does a DNS lookup of BOUND records at that name, which will return zero or more BOUND records. A failure such as NXDOMAIN is considered to return zero records. A lookup can return multiple records if different applications have different boundaries or policy options.

If a relevant policy record is returned, and the record does not contain the NOBOUND bit, the domain name in the record is the policy boundary. A policy record is relevant if it its application number is the application's number, or its application number is zero and there is no record with the application's number. For example, a check for a boundary above "example.com" would be issued at "example._bound.com", and the expected response could be "BOUND 0 0 com".

If there are no boundaries below the queried point, the policy record contains "BOUND 1 0 ." indicating the root. For example, if all subdomains of the "example" top-level domain (TLD) are under the same management as the TLD itself, checks for "_bound.example" or "www._bound.example" would return "BOUND 1 0 .".

If the relevant record has the NOLOWER bit set, the process stops. Otherwise, the client inserts the prefix tag into the name just below (i.e., to the left of) the name at the largest matching boundary indicated in the lookup result, and repeats the lookup. For example:

This process repeats until a DNS lookup returns a relevant record with the NOLOWER bit set, or a lookup returns no relevant records, at which point the boundary is the domain name in the last retrieved relevant record.

If an otherwise relevant record has the NOBOUND bit set, the process continues if the NOLOWER bit is not set but there is no boundary at the name with the NOBOUND bit. They exist so that a name in the hierarchy can be a boundary for some applications but not for others.

5. DNS Records

The publishing entity uses wildcards and prefixed names that parallel the regular names under a TLD to cover the domain's name space.

  *._bound.test IN BOUND 0 0 test"

If there is a boundary at a given name, an entry in the TLD record covers the names below it. For example, if there is a boundary at ".TEST", a suitable record would be:

If the boundary is above the TEST domain, i.e., TEST is under the same management as FOO.TEST, the record would indicate no boundaries, and an additional non-wildcard record is needed to cover TEST itself:

  *._bound.test IN BOUND 0 0 .
  _bound.test   IN BOUND 0 0 .

In domains with irregular policy boundaries, multiple records in the record describe the boundary points. For example, in the CA (Canada) TLD, for national organizations there might be a boundary directly below the national TLD; for provincial organizations there might be a boundary below a provincial subdomain such as "on.ca"; and for local (e.g., municipal) organizations, a boundary below a municipal subdomain such as "toronto.on.ca" might exist. A suitable set of of records covers this structure. The closest encloser rule in RFC 4592 [RFC4592] makes the wildcards match the appropriate names.

*._bound.ca            IN BOUND 0 0 ca
*.on._bound.ca         IN BOUND 0 0 on.ca
*.toronto.on._bound.ca IN BOUND 0 0 toronto.on.ca"

For any set of policy boundaries in a tree of DNS names, a suitable set of policy records can describe the boundaries, so a client can find the boundary for any name in the tree with a single policy lookup per level of delegation.

Since the delegation structure is unlikely to change frequently, long time-to-live (TTL) values in the DBOUND records are appropriate.

If different applications have different boundaries or policy options, the policy records for each application are put at the appropriate names for the boundaries. Due to the way DNS wildcards work, each name with any policy records MUST have records for all policies, with the NOBOUND bit for policies for which the name is not in fact a boundary.

6. Application scenarios

Here are some ways that DMARC and potentially other applications can use BOUND data.

6.1. DMARC

If a DMARC lookup for the domain in a message's From: header fails, the client would do a boundary check for the domain name using the "dmarc" application. The organizational domain is the immediate subdomain of the boundary domain. (Note that the boundary will always be the one looked up or an ancestor.)

6.2. Cookies

If an http request attempts to set a cookie for a domain other than the request's own domain, the client would do boundary check for a "cookie" application for both the request's domain and the cookie domain. If they are not separated by a boundary, the request is allowed.

6.3. SSL Certificates

The client would do a boundary check for the domain name in an normal certificate, or the name after the "*." in a wildcard certificate for a "cert" application. If the boundary is above the name, the name is allowed.

7. Discussion

The total number of DNS lookups is the number of levels of boundary delegation, plus one if the last boundary doesn't have the NOLOWER flag. That is unlikely to be more than 2 or 3 in realistic scenarios, and depends on the number of boundaries, not the number of components in the names that are looked up.

Some domains have very irregular boundaries. This may require a relatively large number of records to describe all the boundaries, perhaps several hundred, but it doesn't seem like a number that would challenge modern DNS servers.

The wildcard lookup means that each time an application looks up the boundaries for a hostname, the lookup results use DNS cache entries that will not be reused other than for subsequent lookups for the identical hostname. This might cause cache churn, but it seems at worst no more than we already tolerate from DNSBL lookups.

8. Security Considerations

The purpose of publishing organization boundaries is to provide advice to third parties that wish to know whether two names are managed by the same organization, allowing those names to be treated "as the same" in some sense. Clients that rely on published boundaries are outsourcing some part of their own security policy to the publisher, so their own security depends on the publisher's boundaries being accurate.

Although in some sense domains are always in control of their subdomains, there are many situations in which parent domains are not expected to influence subdomains. For example, second level domains in global TLDs (gTLDs) operated by registries with contracts with the Internet Corporation for Assigned Names and Numers (ICANN) Since there is no technical bar to a parent publishing records that shadow part or all of the boundary record namespace for delegated subdomains, correct operation depends on the parent and subdomains agreeing about who publishes what.

The DNS is subject to a variety of attacks. DBOUND records are subject to the same ones as any other bit of the DNS, and the same countermeasures, such as using DNSSEC, apply.

9. Variations

Since nothing but BOUND records should be published at names with _bound components, one could get the same effect with TXT records, e.g.:

  *.toronto.on._bound.ca IN TXT "bound=1 0 0 toronto.on.ca"

If third parties want to publish boundary information, they could do it in their own subtree of the DNS. For example, if policy.example were publishing boundary information about boundaries, the records for the test domain described above would be:

  *._bound.test.policy.exaple IN BOUND 0 0 .
  _bound.test.policy.example  IN BOUND 0 0 .

10. IANA considerations

This document defines a new DBOUND RRTYPE. IANA has assigned value TBD.

This document requests that IANA create a registry of BOUND Flag Bits. Its registration policy is IETF Review. Its initial contents are as follows. [[NOTE: new flags are likely to change the lookup algorithm]]

BOUND Flag Bits Initial Values
Bit Reference Description
0x0001 (NOLOWER) (this document) No lower level policies
0x0002 (NOBOUND) (this document) No boundary at this name

This document requests that IANA create a registry of BOUND Applications. Its registration policy is First Come First Served. Its initial contents are as follows. [[Note: New applications don't affect the lookup process, and shouldn't affect existing applications.]]

BOUND Applications Initial Values
Value Reference Description
0 (Any) (this document) Any application without a specific boundary record
1 (DMARC) (this document) DMARC organizational domains

11. References

11.1. Normative References

[RFC1034] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987.
[RFC4592] Lewis, E., "The Role of Wildcards in the Domain Name System", RFC 4592, DOI 10.17487/RFC4592, July 2006.

11.2. Informative References

[PSL] Mozilla Foundation, "Public Suffix List", Nov 2015.

Appendix A. Change Log

NOTE TO RFC EDITOR: This section may be removed upon publication of this document as an RFC.

A.1. Changes from new -00 to -01

Editorial changes to limit standard use to DMARC.

A.2. Changes from -04 to new -00

Add NOBOUND record to make wildcard matches do the right thing

Rename to match WG name

A.3. Changes from -03 to -04

Editorial changes, fix speling errors.

A.4. Changes from -02 to -03

New BOUND record type and modified lookup procedure.

A.5. Changes from -01 to -02

Add ABNF.

MSK overhaul of the middle part.

Put the wildcards back.

A.6. Changes from -00 to -01

Take out wildcards and put everything in one record.

Add DNS nits.

Author's Address

John Levine Taughannock Networks PO Box 727 Trumansburg, NY 14886 Phone: +1 646 481 7726 EMail: standards@taugh.com URI: http://jl.ly