NETCONF Working Group K. Watsen
Internet-Draft Watsen Networks
Intended status: Standards Track April 7, 2019
Expires: October 9, 2019

YANG Groupings for TCP Clients and TCP Servers
draft-kwatsen-netconf-tcp-client-server-01

Abstract

This document defines two YANG modules: the first defines a grouping for configuring a generic TCP client, and the second defines a grouping for configuring a generic TCP server. It is intended that these groupings will be used by applications using the TCP protocol.

Editorial Note (To be removed by RFC Editor)

This draft contains many placeholder values that need to be replaced with finalized values at the time of publication. This note summarizes all of the substitutions that are needed. No other RFC Editor instructions are specified elsewhere in this document.

Artwork in this document contains placeholder values for the date of publication of this draft. Please apply the following replacement:

The following Appendix section is to be removed prior to publication:

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on October 9, 2019.

Copyright Notice

Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

This document defines two YANG 1.1 [RFC7950] modules: the first defines a grouping for configuring a generic TCP client, and the second defines a grouping for configuring a generic TCP server. It is intended that these groupings will be used by applications using the TCP protocol. For instance, these groupings could help define the configuration module for an SSH, TLS, or HTTP based application.

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

3. The TCP Client Model

3.1. Tree Diagram

This section provides a tree diagram [RFC8340] for the "ietf-tcp-client" module.

module: ietf-tcp-client

  grouping tcp-client-grouping
    +-- tcp-client-parameters
       +-- remote-address    inet:host
       +-- remote-port?      inet:port-number
       +-- local-address?    inet:ip-address
       +-- local-port?       inet:port-number
       +-- keepalives! {tcp-client-keepalives}?
          +-- idle-time         uint16
          +-- max-probes?       uint16
          +-- probe-interval?   uint16

3.2. Example Usage

This section presents an example showing the tcp-client-grouping populated with some data.

<tcp-client xmlns="urn:ietf:params:xml:ns:yang:ietf-tcp-client">
  <tcp-client-parameters>
    <remote-address>www.example.com</remote-address>
    <remote-port>443</remote-port>
    <local-address>0.0.0.0</local-address>
    <local-port>0</local-port>
    <keepalives>
      <idle-time>15</idle-time>
      <max-probes>3</max-probes>
      <probe-interval>30</probe-interval>
    </keepalives>
  </tcp-client-parameters>
</tcp-client>

3.3. YANG Module

This YANG module has normative references to [RFC6991].

<CODE BEGINS> file "ietf-tcp-client@2019-04-07.yang"
module ietf-tcp-client {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-tcp-client";
  prefix tcpc;

  import ietf-inet-types {
    prefix inet;
    reference
      "RFC 6991: Common YANG Data Types";
  }

  organization
    "IETF NETCONF (Network Configuration) Working Group";

  contact
    "WG Web:   <http://datatracker.ietf.org/wg/netconf/>
     WG List:  <mailto:netconf@ietf.org>
     Author:   Kent Watsen <mailto:kent+ietf@watsen.net>";

  description
    "This module defines reusable groupings for TCP clients that
     can be used as a basis for specific TCP client instances.

     Copyright (c) 2019 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Simplified
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC XXXX
     (https://www.rfc-editor.org/info/rfcXXXX); see the RFC
     itself for full legal notices.;

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2019-04-07 {
    description
      "Initial version";
    reference
      "RFC XXXX: YANG Groupings for TCP Clients and TCP Servers";
  }

  // Features

  feature tcp-client-keepalives {
    description
      "Per socket TCP keepalive parameters are configurable for
       TCP clients on the server implementing this feature.";
  }

  // Groupings

  grouping tcp-client-grouping {
    description
      "A reusable grouping for configuring a TCP client.";
    container tcp-client-parameters {
      description
        "A container to hold TCP client configuration.";
      leaf remote-address {
        type inet:host;
        mandatory true;
        description
          "The IP address or hostname of the remote peer to
           establish a connection with.  If a domain name is
           configured, then the DNS resolution should happen on
           each connection attempt.  If the the DNS resolution
           results in multiple IP addresses, the IP addresses
           are tried according to local preference order until
           a connection has been established or until all IP
           addresses have failed.";
      }
      leaf remote-port {
        type inet:port-number;
        default "0";
        description
          "The IP port number for the remote peer to establish a
           connection with.  An invalid default value (0) is used
           (instead of 'mandatory true') so that as application
           level data model may 'refine' it with an application
           specific default port number value.";
      }
      leaf local-address {
        type inet:ip-address;
        description
          "The local IP address/interface (VRF?) to bind to for when
           connecting to the remote peer.  INADDR_ANY ('0.0.0.0') or
           INADDR6_ANY ('0:0:0:0:0:0:0:0' a.k.a. '::') MAY be used to
           explicitly indicate the implicit default, that the server
           can bind to any IPv4 or IPv6 addresses, respectively.";
      }
      leaf local-port {
        type inet:port-number;
        default "0";
        description
          "The local IP port number to bind to for when connecting
           to the remote peer.  The port number '0', which is the
           default value, indicates that any available local port
           number may be used.";
      }
      container keepalives {
        if-feature "tcp-client-keepalives";
        presence "Indicates that keepalives are enabled.";
        description
          "Configures the keep-alive policy, to proactively test the
           aliveness of the TCP server.  Not all clients will use
           all the values, based on capabilities of the underlying
           operating system.  An unresponsive TCP server is dropped
           after approximately (idle-time * 60) + (max-probes *
           probe-interval) seconds.";
        leaf idle-time {
          type uint16 {
            range "1..max";
          }
          units "minutes";
          mandatory true;
          description
            "Sets the amount of time in minutes after which if
             no data has been received from the TCP server, a
             TCP-level probe message will be sent to test the
             aliveness of the TCP server.";
        }
        leaf max-probes {
          type uint16 {
            range "1..max";
          }
          description
            "Sets the maximum number of sequential keep-alive
             probes that can fail to obtain a response from the
             TCP server before assuming the TCP server is no
             longer alive.  If no value is specified, then the
             operating system provided default value is used.";
        }
        leaf probe-interval {
          type uint16 {
            range "1..max";
          }
          units "seconds";
          description
            "Sets the time interval between failed probes.  If no
             value is specified, then the operating system provided
             default value is used.";
        }
      } // container keepalives
    } // container tcp-client-parameters
  } // grouping tcp-client-grouping
}
<CODE ENDS>

4. The TCP Server Model

4.1. Tree Diagram

This section provides a tree diagram [RFC8340] for the "ietf-tcp-server" module.

module: ietf-tcp-server

  grouping tcp-server-grouping
    +-- tcp-server-parameters
       +-- local-address    inet:ip-address
       +-- local-port?      inet:port-number
       +-- keepalives! {tcp-server-keepalives}?
          +-- idle-time         uint16
          +-- max-probes?       uint16
          +-- probe-interval?   uint16

4.2. Example Usage

This section presents an example showing the tcp-server-grouping populated with some data.

<tcp-server xmlns="urn:ietf:params:xml:ns:yang:ietf-tcp-server">
  <tcp-server-parameters>
    <local-address>10.20.30.40</local-address>
    <local-port>7777</local-port>
    <keepalives>
      <idle-time>15</idle-time>
      <max-probes>3</max-probes>
      <probe-interval>30</probe-interval>
    </keepalives>
  </tcp-server-parameters>
</tcp-server>

4.3. YANG Module

This YANG module has normative references to [RFC6991].

<CODE BEGINS> file "ietf-tcp-server@2019-04-07.yang"
module ietf-tcp-server {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-tcp-server";
  prefix tcps;

  import ietf-inet-types {
    prefix inet;
    reference
      "RFC 6991: Common YANG Data Types";
  }

  organization
    "IETF NETCONF (Network Configuration) Working Group";

  contact
    "WG Web:   <http://datatracker.ietf.org/wg/netconf/>
     WG List:  <mailto:netconf@ietf.org>
     Author:   Kent Watsen <mailto:kent+ietf@watsen.net>";

  description
    "This module defines reusable groupings for TCP servers that
     can be used as a basis for specific TCP server instances.

     Copyright (c) 2019 IETF Trust and the persons identified
     as authors of the code. All rights reserved.

     Redistribution and use in source and binary forms, with
     or without modification, is permitted pursuant to, and
     subject to the license terms contained in, the Simplified
     BSD License set forth in Section 4.c of the IETF Trust's
     Legal Provisions Relating to IETF Documents
     (https://trustee.ietf.org/license-info).

     This version of this YANG module is part of RFC XXXX
     (https://www.rfc-editor.org/info/rfcXXXX); see the RFC
     itself for full legal notices.;

     The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL',
     'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED',
     'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document
     are to be interpreted as described in BCP 14 (RFC 2119)
     (RFC 8174) when, and only when, they appear in all
     capitals, as shown here.";

  revision 2019-04-07 {
    description
      "Initial version";
    reference
      "RFC XXXX: YANG Groupings for TCP Clients and TCP Servers";
  }

  // Features

  feature tcp-server-keepalives {
    description
      "Per socket TCP keepalive parameters are configurable for
       TCP servers on the server implementing this feature.";
  }

  // Groupings

  grouping tcp-server-grouping {
    description
      "A reusable grouping for configuring a TCP server.";
    container tcp-server-parameters {
      description
        "A container to hold TCP server configuration.";
      leaf local-address {
        type inet:ip-address;
        mandatory true;
        description
          "The local IP address to listen on for incoming
           TCL client connections.  INADDR_ANY (0.0.0.0) or
           INADDR6_ANY (0:0:0:0:0:0:0:0 a.k.a. ::) MUST be
           used when the server is to listen on all IPv4 or
           IPv6 addresses, respectively.";
      }
      leaf local-port {
        type inet:port-number;
        default "0";
        description
          "The local port number to listen on for incoming TCP
           client connections.  An invalid default value (0)
           is used (instead of 'mandatory true') so that an
           application level data model may 'refine' it with
           an application specific default port number value.";
      }
      container keepalives {
        if-feature "tcp-server-keepalives";
        presence "Indicates that keepalives are enabled.";
        description
          "Configures the keep-alive policy, to proactively test the
           aliveness of the TCP client.  Not all servers will use
           all the values, based on capabilities of the underlying
           operating system.  An unresponsive TCP client is dropped
           after approximately (idle-time * 60) + (max-probes *
           probe-interval) seconds.";
        leaf idle-time {
          type uint16 {
            range "1..max";
          }
          units "minutes";
          mandatory true;
          description
            "Sets the amount of time in minutes after which if no
             data has been received from the TCP client, a TCP-level
             probe message will be sent to test the aliveness of
             the TCP client.";
        }
        leaf max-probes {
          type uint16 {
            range "1..max";
          }
          description
            "Sets the maximum number of sequential keep-alive
             probes that can fail to obtain a response from the
             TCP client before assuming the TCP client is no
             longer alive.  If no value is specified, then the
             operating system provided default value is used.";
        }
        leaf probe-interval {
          type uint16 {
            range "1..max";
          }
          units "seconds";
          description
            "Sets the time interval between failed probes.  If no
             value is specified, then the operating system provided
             default value is used.";
        }
      } // container keepalives
    } // container tcp-server-parameters
  }
}
<CODE ENDS>

5. Security Considerations

The YANG modules defined in this document are designed to be accessed via YANG based management protocols, such as NETCONF [RFC6241] and RESTCONF [RFC8040]. Both of these protocols have mandatory-to-implement secure transport layers (e.g., SSH, TCP) with mutual authentication.

The NETCONF access control model (NACM) [RFC8341] provides the means to restrict access for particular users to a pre-configured subset of all available protocol operations and content.

Since the modules defined in this document only define groupings, these considerations are primarily for the designers of other modules that use these groupings.

There are a number of data nodes defined in the YANG modules that are writable/creatable/deletable (i.e., config true, which is the default). These data nodes may be considered sensitive or vulnerable in some network environments. Write operations (e.g., edit-config) to these data nodes without proper protection can have a negative effect on network operations. These are the subtrees and data nodes and their sensitivity/vulnerability:

None of the writable/creatable/deletable data nodes in the YANG modules defined in this document are considered more sensitive or vulnerable then standard configuration.

Some of the readable data nodes in the YANG modules may be considered sensitive or vulnerable in some network environments. It is thus important to control read access (e.g., via get, get-config, or notification) to these data nodes. These are the subtrees and data nodes and their sensitivity/vulnerability:

None of the readable data nodes in the YANG modules defined in this document are considered more sensitive or vulnerable then standard configuration.

This document does not define any RPC actions and hence this section does not consider the security of RPCs.

6. IANA Considerations

6.1. The IETF XML Registry

This document registers two URIs in the "ns" subregistry of the IETF XML Registry [RFC3688]. Following the format in [RFC3688], the following registrations are requested:

   URI: urn:ietf:params:xml:ns:yang:ietf-tcp-client
   Registrant Contact: The NETCONF WG of the IETF.
   XML: N/A, the requested URI is an XML namespace.

   URI: urn:ietf:params:xml:ns:yang:ietf-tcp-server
   Registrant Contact: The NETCONF WG of the IETF.
   XML: N/A, the requested URI is an XML namespace.

6.2. The YANG Module Names Registry

This document registers two YANG modules in the YANG Module Names registry [RFC6020]. Following the format in [RFC6020], the following registrations are requested:

   name:         ietf-tcp-client
   namespace:    urn:ietf:params:xml:ns:yang:ietf-tcp-client
   prefix:       tcpc
   reference:    RFC XXXX

   name:         ietf-tcp-server
   namespace:    urn:ietf:params:xml:ns:yang:ietf-tcp-server
   prefix:       tcps
   reference:    RFC XXXX

7. References

7.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010.
[RFC6991] Schoenwaelder, J., "Common YANG Data Types", RFC 6991, DOI 10.17487/RFC6991, July 2013.
[RFC7950] Bjorklund, M., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, August 2016.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017.
[RFC8341] Bierman, A. and M. Bjorklund, "Network Configuration Access Control Model", STD 91, RFC 8341, DOI 10.17487/RFC8341, March 2018.

7.2. Informative References

[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004.
[RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J. and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011.
[RFC8040] Bierman, A., Bjorklund, M. and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017.
[RFC8340] Bjorklund, M. and L. Berger, "YANG Tree Diagrams", BCP 215, RFC 8340, DOI 10.17487/RFC8340, March 2018.

Author's Address

Kent Watsen Watsen Networks EMail: kent+ietf@watsen.net