Internet-Draft Intent-Based Networking - Concepts and D March 2022
Clemm, et al. Expires 22 September 2022 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-irtf-nmrg-ibn-concepts-definitions-09
Published:
Intended Status:
Informational
Expires:
Authors:
A. Clemm
Futurewei
L. Ciavaglia
Rakuten Mobile
L. Z. Granville
Federal University of Rio Grande do Sul (UFRGS)
J. Tantsura
Microsoft

Intent-Based Networking - Concepts and Definitions

Abstract

Intent and Intent-Based Networking (IBN) are taking the industry by storm. At the same time, IBN-related terms are often used loosely and inconsistently, in many cases overlapping and confused with other concepts such as "Policy." This document clarifies the concept of "Intent" and provides an overview of the functionality that is associated with it. The goal is to contribute towards a common and shared understanding of terms, concepts, and functionality that can be used as the foundation to guide further definition of associated research and engineering problems and their solutions.

This document is a product of the IRTF Network Management Research Group (NMRG). It reflects the consensus of the research group, having received many detailed and positive reviews by RG participants. It is published for informational purposes.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 2 September 2022.

Table of Contents

1. Introduction

This document is a product of the IRTF Network Management Research Group (NMRG). It reflects the consensus of the RG, receiving reviews and explicit support from many participants. It is published for informational purposes.

In the past, interest regarding management and operations in the IETF has focused on individual network and device features. Standardization emphasis has generally been put on management instrumentation that needed to be provided to a networking device. A prime example of this is SNMP-based management [RFC3411] and the 200+ MIBs that have been defined by the IETF over the years. More recent examples include YANG data model definitions [RFC7950] for aspects such as interface configuration, ACL configuration, and Syslog configuration.

There is a clear sense and reality that managing networks by configuring myriads of "nerd knobs" on a device-by-device basis is no longer an option in modern network environments. Significant challenges arise with keeping device configurations not only consistent across a network but also consistent with the needs of services and service features they are supposed to enable. Additional challenges arise with regard to being able to rapidly adapt the network as needed and to be able to do so at scale. At the same time, operations need to be streamlined and automated wherever possible to not only lower operational expenses but also allow for rapid reconfiguration of networks at sub-second time scales and to ensure that networks are delivering their functionality as expected. Among other things, this requires the ability to consume operational data, perform analytics, and dynamically take actions in a way that is aware of context as well as intended outcomes at near real-time speeds.

Accordingly, the IETF has begun to address end-to-end management aspects that go beyond the realm of individual devices in isolation. Examples include the definition of YANG models for network topology [RFC8345] or the introduction of service models used by service orchestration systems and controllers [RFC8309]. Much of the interest has been fueled by the discussion about how to manage autonomic networks, as discussed in the ANIMA working group. Autonomic networks are driven by the desire to lower operational expenses and make the management of the network as a whole more straightforward, putting it at odds with the need to manage the network one device and one feature at a time. However, while autonomic networks are intended to exhibit "self-management" properties, they still require input from an operator or outside system to provide operational guidance and information about the goals, purposes, and service instances that the network is to serve.

This input and operational guidance are commonly referred to as "intent," and networks that allow network operators to provide their input using intent as "Intent-Based Networks" (IBN) and the systems that help implement intent as "Intent-Based Systems" (IBS). Those systems can manifest themselves in a number of ways, for example as a controller or managemement system that are implemented as an application that runs on a server or set of servers, or as a set of functions that are distributed across a network and that collectively perform their intent-based functionality.

However, intent is about more than just enabling a form of operator interaction with the network that involves higher-layer abstractions. It is also about the ability to let operators focus on what they want their desired outcomes to be while leaving details about how those outcomes would, in fact, be achieved to the IBN (respectively IBS). This, in turn, enables much greater operational efficiency at greater scale, in shorter time scales, with less dependency on human activities (and possibility for mistakes), and an ideal candidate, e.g., for artificial intelligence techniques that can bring about the next level of network automation [Clemm20].

This vision has since caught on with the industry, leading to a significant number of solutions that offer Intent-Based Management that promise network providers to manage networks holistically at a higher level of abstraction and as a system that happens to consist of interconnected components, as opposed to a set of independent devices (that happen to be interconnected). Those offerings include IBN and IBS (offering a full lifecycle of intent), SDN controllers (offering a single point of control and administration for a network), and network management and Operations Support Systems (OSS).

It has been recognized for a long time that comprehensive management solutions cannot operate only at the level of individual devices and low-level configurations. In this sense, the vision of intent is not entirely new. In the past, ITU-T's model of a Telecommunications Management Network (TMN) introduced a set of management layers that defined a management hierarchy, consisting of network element, network, service, and business management [M3010]. High-level operational objectives would propagate in a top-down fashion from upper to lower layers. The associated abstraction hierarchy was crucial to decompose management complexity into separate areas of concern. This abstraction hierarchy was accompanied by an information hierarchy that concerned itself at the lowest level with device-specific information, but that would, at higher layers, include, for example, end-to-end service instances. Similarly, the concept of Policy-Based Network Management (PBNM) has, for a long time, touted the ability to allow users to manage networks by specifying high-level management policies, with policy systems automatically "rendering" those policies, i.e., breaking them down into low-level configurations and control logic. (As a note, in the context of this document, "users" generally refers to operators and administrators who are responsible for the management and operation of communication services and networking infrastructures, not to "end users" of communication services.)

What has been missing, however, is putting these concepts into a more current context and updating them to account for current technology trends. This document clarifies the concepts behind intent. It differentiates intent from related concepts. It also provides an overview of first-order principles of IBN as well as the associated functionality. The goal is to contribute to a common and shared understanding that can be used as a foundation to articulate research and engineering problems in the area of IBN.

It should be noted that the articulation of IBN-related research problems is beyond the scope of this document. However, it should be recognized that IBN has become an important topic in the research community. Per IEEE Xplore [IEEEXPLORE], as of December 2021, in the past decade since 2012, there have been 1138 papers with the index term "intent", of which 411 specifically mention networking. The time period since 2020 alone accounts for 316 papers on intent and 153 for intent networking, indicating accelerating interest. In addition, workshops dedicated to this theme are beginning to appear, such as the IEEE International Workshop on Intent-Based Networking [WIN21], as well as various special journal issues [IEEE-TITS21] [MDPI22]. A survey of current intent-driven networking research has been published in [Pang20], listing among the most pressing current research challenges aspects such as intent translation and understanding, intent interfaces, and security.

2. Definitions and Acronyms

3. Introduction of Concepts

The following section provides an overview of the concept of intent and Intent-Based Management. It also provides an overview of the related concepts of service models and policies (and Policy-Based Network Management), and explains how they relate to intent and Intent-Based Management.

3.1. Intent and Intent-Based Management

In this document, intent is defined as a set of operational goals (that a network is supposed to meet) and outcomes (that a network is supposed to deliver), defined in a declarative manner without specifying how to achieve or implement them.

The term "intent" was first introduced in the context of Autonomic Networks, where it is defined as "an abstract, high-level policy used to operate a network" [RFC7575]. According to this definition, an intent is a specific type of policy provided by a user to provide guidance to the Autonomic Network that would otherwise operate without human intervention. However, to avoid using intent simply as a synonym for policy, a distinction that differentiates intent clearly from other types of policies needs to be introduced.

Intent-Based Management aims to lead towards networks that are fundamentally simpler to manage and operate, requiring only minimal outside intervention. Networks, even when they are autonomic, are not clairvoyant and have no way of automatically knowing particular operational goals nor which instances of networking services to support. In other words, they do not know what the intent of the network provider is that gives the network the purpose of its being. This still needs to be communicated to the network by what informally constitutes intent. That being said, the concept of intent is not limited just to autonomic networks, such as networks that feature an Autonomic Control Plane [RFC8994], but applies to any network.

Intent defines goals and outcomes in a manner that is purely declarative, specifying what to accomplish, not how to achieve it. Intent thus applies several important concepts simultaneously:

  • It provides data abstraction: users do not need to be concerned with low-level device configuration and nerd knobs.
  • It provides functional abstraction from particular management and control logic: users do not need to be concerned even with how to achieve a given intent. What is specified is the desired outcome, with the IBS automatically figuring out a course of action (e.g., using an algorithm or applying a set of rules derived from the intent) for how to achieve the outcome.

The following are some examples of intent, expressed in natural language for the sake of clarity (actual interfaces used to convey intent may differ):

  • "Steer networking traffic originating from endpoints in one geography away from a second geography, unless the destination lies in that second geography." (States what to achieve, not how.)
  • "Avoid routing networking traffic originating from a given set of endpoints (or associated with a given customer) through a particular vendor's equipment, even if this occurs at the expense of reduced service levels." (States what to achieve, not how, providing additional guidance for how to trade off between different goals when necessary)
  • "Maximize network utilization even if it means trading off service levels (such as latency, loss) unless service levels have deteriorated 20% or more from their historical mean." (A desired outcome, with a set of constraints for additional guidance, which does not specify how to achieve this.)
  • "VPN service must have path protection at all times for all paths." (A desired outcome of which it may not be clear how it can be precisely accommodated.)
  • "Generate in-situ OAM data and network telemetry for later offline analysis whenever significant fluctuations in latency across a path are observed." (Goes beyond traditional event-condition-action by not being specific about what constitutes "significant" and what specific data to collect)
  • "Route traffic in a Space Information Network in a way that minimizes dependency on stratospheric balloons unless the intended destination is an aircraft." (Does not specify how to precisely achieve this; extrapolates on scenarios mentioned in [Pang20])
  • "For a smart city service, ensure traffic signal control traffic uses dedicated and redundant slices that avoid fate sharing." (A desired outcome with a set of constraints and additional guidance without specifying how to precisely achieve this; extrapolates on scenarios from [Gharbaoui21]).

In contrast, the following are examples of what would not constitute intent (again, expressed in natural language for the sake of clarity):

  • "Configure a given interface with an IP address." This would be considered device configuration and fiddling with configuration knobs, not intent.
  • "When interface utilization exceeds a specific threshold, emit an alert." This would be a rule that can help support network automation, but a simple rule is not an intent.
  • "Configure a VPN with a tunnel from A to B over path P." This would be considered as a configuration of a service.
  • "Deny traffic to prefix P1 unless it is traffic from prefix P2." This would be an example of an access policy or a firewall rule, not intent.

In networks, in particular in networks that are deemed autonomic, intent should ideally be rendered by the network itself, i.e., translated into device-specific rules and courses of action. Ideally, intent would not need to be orchestrated or broken down by a higher-level, centralized system but by the network devices themselves using a combination of distributed algorithms and local device abstractions. In this idealized vision, because intent holds for the network as a whole, intent should ideally be automatically disseminated across all devices in the network, which can themselves decide whether they need to act on it.

However, such decentralization will not be practical in all cases. Certain functions will need to be at least conceptually centralized. For example, users may require a single conceptual point of interaction with the network. The system providing this points acts as the operational front end for the network through which users can direct requests at the network and from which they can receive updates about the network. It may appear to users as a single system, even if it is implemented in a distributed manner. In turn, it interacts with and manages other systems in the network as needed in order to realize (i.e., to fulfill and to assure) the desired intent. Likewise, the vast majority of network devices may be intent-agnostic and focus only (for example) on the actual forwarding of packets. Many devices may also be constrained in terms of their processing resources. This means that not every device may be able to act on intent on its own. Again, intent in those cases can be achieved by a separate system which performs the required actions.

Another reason to provide intent functionality from a conceptually centralized point is in cases where the the realization of a certain type of intent benefits from global knowledge of a network and its state. In many cases, such a global view may be impractical to maintain by individual devices, for example due to the volume of data and time lags that are involved. It may even be impractical for devices to simply access such a view from another remote system if such were available.

All of this implies that in many cases, certain intent functionality needs to be provided by functions that are specialized for that purpose and that may be provided by dedicated systems (which in some cases could also co-host other networking functions). For example, the translation of specific types of intent into corresponding courses of action and algorithms to achieve the desired outcomes may need to be provided by such specialized functions. Of course, to avoid single points of failure, the implementation and hosting of such functions may still be distributed, even if conceptually centralized.

Regardless of its particular implementation in centralized or decentralized manner, an IBN is a network that can be managed using intent. This means that it is able to recognize and ingest intent of an operator or user and configure and adapt itself according to the user intent, achieving an intended outcome (i.e., a desired state or behavior) without requiring the user to specify the detailed technical steps for how to achieve the outcome. Instead, the IBN will be able to figure out on its own how to achieve the outcome. Similarly, an IBS is a system that allows users to manage a network using intent. Such a system will serve as a point of interaction with users and implement the functionality that is necessary to achieve the intended outcomes, interacting for that purpose with the network as required.

Other definitions of intent exist, such as [TR523]. Intent there is simply defined as a declarative interface that is typically provided by a controller. It implies the presence of a centralized function that renders the intent into lower-level policies or instructions and orchestrates them across the network. While this is certainly one way of implementation, the definition that is presented here is more encompassing and ambitious, as it emphasizes the importance of managing the network by specifying desired outcomes without the specific steps to be taken in order to achieve the outcome. A controller API that simply provides a network-level of abstraction is more limited and would not necessarily qualify as intent. Likewise, ingestion and recognition of intent may not necessarily occur via a traditional API but may involve other types of human-machine interactions.

3.2.1. Service Models

A service model is a model that represents a service that is provided by a network to a user. Per [RFC8309], a service model describes a service and its parameters in a portable/implementation-agnostic way that can be used independently of the equipment and operating environment on which the service is realized. Two subcategories are distinguished: a "Customer Service Model" describes an instance of a service as provided to a customer, possibly associated with a service order. A "Service Delivery Model" describes how a service is instantiated over existing networking infrastructure.

An example of a service could be a Layer 3 VPN service [RFC8299], a Network Slice [I-D.ietf-teas-ietf-network-slice-definition], or residential Internet access. Service models represent service instances as entities in their own right. Services have their own parameters, actions, and lifecycles. Typically, service instances can be bound to end users of communication services, who might be billed for the services provided.

Instantiating a service typically involves multiple aspects:

  • A user (or northbound system) needs to define and/or request a service to be instantiated.
  • Resources, such as IP addresses, AS numbers, VLAN or VxLAN pools, interfaces, bandwidth, or memory need to be allocated.
  • How to map services to the resources needs to be defined. Multiple mappings are often possible, which to select may depend on context (such as which type of access is available to connect the end user of a communication service with the service).
  • Bindings between upper and lower-level objects need to be maintained.
  • Once instantiated, the service operational state needs to be validated and assured to ensure that the network indeed delivers the service as requested.

The realization of service models involves a system, such as a controller, that provides provisioning logic. This includes breaking down high-level service abstractions into lower-level device abstractions, identifying and allocating system resources, and orchestrating individual provisioning steps. Orchestration operations are generally conducted using a "push" model in which the controller/manager initiates the operations as required, then pushes down the specific configurations to the device and validates whether the new changes have been accepted and the new operational/derived states are achieved and in sync with the intent/desired state. In addition to instantiating and creating new instances of a service, updating, modifying, and decommissioning services need to be also supported. The device itself typically remains agnostic to the service or the fact that its resources or configurations are part of a service/concept at a higher layer.

Instantiated service models map to instantiated lower-layer network and device models. Examples include instances of paths or instances of specific port configurations. The service model typically also models dependencies and layering of services over lower-layer networking resources that are used to provide services. This facilitates management by allowing to follow dependencies for troubleshooting activities, to perform impact analysis in which events in the network are assessed regarding their impact on services and customers. Services are typically orchestrated and provisioned top-to-bottom, which also facilitates keeping track of the assignment of network resources (composition), while troubleshooted bottom-up (decomposition). Service models might also be associated with other data that does not concern the network but provides business context. This includes things such as customer data (such as billing information), service orders and service catalogs, tariffs, service contracts, and Service Level Agreements (SLAs), including contractual agreements regarding remediation actions.

[I-D.ietf-teas-te-service-mapping-yang] is an example of a data model that provides a mapping for customer service models (e.g., the L3VPN Service Model) to Traffic Engineering (TE) models (e.g., the TE Tunnel or the Abstraction and Control of Traffic Engineered Networks Virtual Network model)

Like intent, service models provide higher layers of abstraction. Service models are often also complemented with mappings that capture dependencies between service and device or network configurations. Unlike intent, service models do not allow to define a desired "outcome" that would be automatically maintained by an IBS. Instead, the management of service models requires the development of sophisticated algorithms and control logic by network providers or system integrators.

3.2.2. Policy and Policy-Based Network Management

Policy-Based Network Management (PBNM) is a management paradigm that separates the rules that govern the behavior of a system from the functionality of the system. It promises to reduce maintenance costs of information and communication systems while improving flexibility and runtime adaptability. It is present today at the heart of a multitude of management architectures and paradigms, including SLA-driven, Business-driven, autonomous, adaptive, and self-* management [Boutaba07]. The interested reader is asked to refer to the rich set of existing literature, which includes this and many other references. In the following, we will only provide a much-abridged and distilled overview.

At the heart of policy-based management is the concept of a policy. Multiple definitions of policy exist: "Policies are rules governing the choices in the behavior of a system" [Sloman94]. "Policy is a set of rules that are used to manage and control the changing and/or maintaining of the state of one or more managed objects" [Strassner03]. Common to most definitions is the definition of a policy as a "rule." Typically, the definition of a rule consists of an event (whose occurrence triggers a rule), a set of conditions (which get assessed and which must be true before any actions are actually "fired"), and, finally, a set of one or more actions that are carried out when the condition holds.

Policy-based management can be considered an imperative management paradigm: Policies precisely specified what needs to be done when and in which circumstance. By using policies, management can, in effect, be defined as a set of simple control loops. This makes policy-based management a suitable technology to implement autonomic behavior that can exhibit self-* management properties, including self-configuration, self-healing, self-optimization, and self-protection. This is notwithstanding the fact that policy-based management may make use of the concept of abstractions (such as, "Bob gets gold service") that hide from the user the specifics of how that abstraction is rendered in a particular deployment.

Policies typically involve a certain degree of abstraction in order to cope with the heterogeneity of networking devices. Rather than having a device-specific policy that defines events, conditions, and actions in terms of device-specific commands, parameters, and data models, a policy is defined at a higher level of abstraction involving a canonical model of systems and devices to which the policy is to be applied. A policy agent on a controller or the device subsequently "renders" the policy, i.e., translates the canonical model into a device-specific representation. This concept allows applying the same policy across a wide range of devices without needing to define multiple variants. In other words - policy definition is de-coupled from policy instantiation and policy enforcement. This enables operational scale and allows network operators and authors of policies to think in higher terms of abstraction than device specifics and be able to reuse the same, high-level definition across different networking domains, WAN, DC, or public cloud.

PBNM is typically "push-based": Policies are pushed onto devices where they are rendered and enforced. The push operations are conducted by a manager or controller, which is responsible for deploying policies across the network and monitoring their proper operation. That being said, other policy architectures are possible. For example, policy-based management can also include a pull-component in which the decision regarding which action to take is delegated to a so-called Policy Decision Point (PDP). This PDP can reside outside the managed device itself and has typically global visibility and context with which to make policy decisions. Whenever a network device observes an event that is associated with a policy but lacks the full definition of the policy or the ability to reach a conclusion regarding the expected action, it reaches out to the PDP for a decision (reached, for example, by deciding on an action based on various conditions). Subsequently, the device carries out the decision as returned by the PDP - the device "enforces" the policy and hence acts as a PEP (Policy Enforcement Point). Either way, PBNM architectures typically involve a central component from which policies are deployed across the network and/or policy decisions served.

Like Intent, policies provide a higher layer of abstraction. Policy systems are also able to capture dynamic aspects of the system under management through the specification of rules that allow defining various triggers for specific courses of action. Unlike intent, the definition of those rules (and courses of action) still needs to be articulated by users. Since the intent is unknown, conflict resolution within or between policies requires interactions with a user or some kind of logic that resides outside of PBNM. In that sense, policy constitutes a lower level of abstraction than intent, and it is conceivable for Intent-Based Systems to generate policies that are subsequently deployed by a PBNM system, allowing PBNM to support Intent-Based Networking.

3.2.3. Distinguishing between Intent, Policy, and Service Models

What Intent, Policy, and Service Models all have in common is the fact that they involve a higher-layer of abstraction of a network that does not involve device-specifics, that generally transcends individual devices, and that makes the network easier to manage for applications and human users compared to having to manage the network one device at a time. Beyond that, differences emerge.

Summarized differences:

  • A service model is a data model that is used to describe instances of services that are provided to customers. A service model has dependencies on lower-level models (device and network models) when describing how the service is mapped onto the underlying network and IT infrastructure. Instantiating a service model requires orchestration by a system; the logic for how to orchestrate/manage/provide the service model and how to map it onto underlying resources is not included as part of the model itself.
  • Policy is a set of rules, typically modeled around a variation of events/conditions/actions, used to express simple control loops that can be rendered by devices without requiring intervention by the outside system. Policies let users define what to do under what circumstances, but they do not specify the desired outcome.
  • Intent is a high-level, declarative goal that operates at the level of a network and services it provides, not individual devices. It is used to define outcomes and high-level operational goals, without specifying how those outcomes should be achieved or how goals should specifically be satisfied, and without the need to enumerate specific events, conditions, and actions. Which algorithm or rules to apply can be automatically "learned/derived from intent" by the IBS. In the context of autonomic networking, intent is ideally rendered by the network itself; also, the dissemination of intent across the network and any required coordination between nodes is resolved by the network without the need for external systems.

One analogy to capture the difference between policy and Intent-Based Systems is that of Expert Systems and Learning Systems in the field of Artificial Intelligence. Expert Systems operate on knowledge bases with rules that are supplied by users, analogous to policy systems whose policies are supplied by users. They are able to make automatic inferences based on those rules but are not able to "learn" new rules on their own. Learning Systems (popularized by deep learning and neural networks), on the other hand, are able to learn without depending on user programming or articulation of rules. However, they do require a learning or training phase requiring large data sets; explanations of actions that the system actually takes provide a different set of challenges. Analogous to intent-based systems, users focus on what they would like the learning system to accomplish but not how to do it.

4. Principles

The following main operating principles allow characterizing the intent-based/-driven/-defined nature of a system.

  1. Single Source of Truth (SSoT) and Single Version/View of Truth (SVoT). The SSoT is an essential component of an intent-based system as it enables several important operations. The set of validated intent expressions is the system's SSoT. SSoT and the records of the operational states enable comparing the intended/desired state and actual/operational states of the system and determining drift between them. SSoT and the drift information provide the basis for corrective actions. If the IBS is equipped with the means to predict states, it can further develop strategies to anticipate, plan, and pro-actively act on any diverging trends with the aim to minimize their impact. Beyond providing a means for consistent system operation, SSoT also allows for better traceability to validate if/how the initial intent and associated business goals have been properly met, to evaluate the impacts of changes in the intent parameters and impacts and effects of the events occurring in the system.

    Single Version (or View) of Truth derives from the SSoT and can be used to perform other operations, such as querying, polling, or filtering measured and correlated information in order to create so-called "views." These views can serve the users of the intent-based system. In order to create intents as single sources of truth, the IBS must follow well-specified and well-documented processes and models. In other contexts, SSoT is also referred to as the invariance of the intent [Lenrow15].

  2. One-touch but not one-shot. In an ideal intent-based system, the user expresses intent in one form or another, and then the system takes over all subsequent operations (one-touch). A zero-touch approach could also be imagined in the case where the intent-based system has the capabilities or means to recognize intentions in any form of data. However, the zero- or one-touch approach should not distract from the fact that reaching the state of a well-formed and valid intent expression is not a one-shot process. On the contrary, the interfacing between the user and the intent-based system could be designed as an interactive and iterative process. Depending on the level of abstraction, the intent expressions may initially contain more or less implicit parts and unprecise or unknown parameters and constraints. The role of the intent-based system is to parse, understand, and refine the intent expression to reach a well-formed and valid intent expression that can be further used by the system for the fulfillment and assurance operations. An intent refinement process could use a combination of iterative steps involving the user to validate the proposed refined intent and to ask the user for clarifications in case some parameters or variables could not be deduced or learned by means of the system itself. In addition, the Intent-Based System will need to moderate between conflicting intent, helping users to properly choose between intent alternatives that may have different ramifications.
  3. Autonomy and Supervision. A desirable goal for an intent-based system is to offer a high degree of flexibility and freedom on both the user side and system side, e.g., by giving the user the ability to express intents using the user's own terms, by supporting different forms of expression of intents and being capable of refining the intent expressions to well-formed and exploitable expressions. The dual principle of autonomy and supervision allows operating a system that will have the necessary levels of autonomy to conduct its tasks and operations without requiring the intervention of the user and taking its own decisions (within its areas of concern and span of control) as how to perform and meet the user expectations in terms of performance and quality, while at the same time providing the proper level of supervision to satisfy the user requirements for reporting and escalation of relevant information.
  4. Learning. An intent-based system is a learning system. In contrast to an imperative-type of system, such as Event-Condition-Action policy rules, where the user defines beforehand the expected behavior of the system to various events and conditions, in an intent-based system, the user only declares what the system is supposed to achieve and not how to achieve these goals. There is thus a transfer of reasoning/rationality from the human (domain knowledge) to the system. This transfer of cognitive capability also implies the availability in the intent-based system of capabilities or means for learning, reasoning, and knowledge representation and management. The learning abilities of an IBS can apply to different tasks such as optimization of the intent rendering or intent refinement processes. The fact that an intent-based system is a continuously evolving system creates the condition for continuous learning and optimization. Other cognitive capabilities such as planning can also be leveraged in an intent-based system to anticipate or forecast future system state and response to changes in intents or network conditions and thus elaboration of plans to accommodate the changes while preserving system stability and efficiency in a trade-off with cost and robustness of operations.
  5. Capability exposure. Capability exposure consists in the need for expressive network capabilities, requirements, and constraints to be able to compose/decompose intents and map the user's expectations to the system capabilities.
  6. Abstract and outcome-driven. Users do not need to be concerned with how intent is achieved and are empowered to think in terms of outcomes. In addition, they can refer to concepts at a higher level of abstractions, independent e.g. of vendor-specific renderings.

The described principles are perhaps the most prominent, but they are not an exhaustive list. There are additional aspects to consider, such as:

All of these principles and considerations have implications on the design of intent-based systems and their supporting architecture. Accordingly, they need to be considered when deriving functional and operational requirements.

5. Intent-Based Networking - Functionality

Intent-Based Networking involves a wide variety of functions that can be roughly divided into two categories:

The following sections provide a more comprehensive overview of those functions.

5.1. Intent Fulfillment

Intent fulfillment is concerned with the functions that take intent from its origination by a user (generally, an administrator of the responsible organization) to its realization in the network.

5.1.1. Intent Ingestion and Interaction with Users

The first set of functions is concerned with "ingesting" intent, i.e., obtaining intent through interactions with users. They provide functions that recognize intent from interaction with the user as well as functions that allow users to refine their intent and articulate it in such ways so that it becomes actionable by an Intent-Based System. Typically, those functions go beyond those provided by a traditional API, although APIs may still be provided (and needed for interactions beyond human users, i.e., with other machines). Many cases would also involve a set of intuitive and easy-to-navigate workflows that guide users through the intent ingestion phase, making sure that all inputs that are necessary for intent modeling and consecutive translation have been gathered. They may support unconventional human-machine interactions, in which a human will not simply give simple commands but which may involve a human-machine dialog to provide clarifications, to explain ramifications and trade-offs, and to facilitate refinements.

The goal is ultimately to make IBSs as easy and natural to use and interact with as possible, in particular allowing human users to interact with the IBS in ways that do not involve a steep learning curve that forces the user to learn the "language" of the system. Ideally, it will be the Intent-Based Systems that is increasingly be able to learn how to understand the user as opposed to the other way round. Of course, further research will be required to make this a reality.

5.1.2. Intent Translation

A second set of functions needs to translate user intent into courses of action and requests to take against the network, which will be meaningful to network configuration and provisioning systems. These functions lie at the core of IBS, bridging the gap between interaction with users on the one hand and the traditional management and operations side that will need to orchestrate provisioning and configuration across the network.

Beyond merely breaking down a higher layer of abstraction (intent) into a lower layer of abstraction (policies, device configuration), Intent Translation functions can be complemented with functions and algorithms that perform optimizations and that are able to learn and improve over time in order to result in the best outcomes, specifically in cases where multiple ways of achieving those outcomes are conceivable. For example, satisfying an intent may involve computation of paths and other parameters that will need to be configured across the network. Heuristics and algorithms to do so may evolve over time to optimize outcomes that may depend on a myriad of dynamic network conditions and context.

5.1.3. Intent Orchestration

A third set of functions deals with the actual configuration and provisioning steps that need to be orchestrated across the network and that were determined by the previous intent translation step.

5.2. Intent Assurance

Intent assurance is concerned with the functions that are necessary to ensure that the network indeed complies with the desired intent once it has been fulfilled.

5.2.1. Monitoring

A first set of assurance functions monitors and observes the network and its exhibited behavior. This includes all the usual assurance functions such as monitoring the network for events and performance outliers, performing measurements to assess service levels that are being delivered, generating and collecting telemetry data. Monitoring and observation are required as the basis for the next set of functions that assess whether the observed behavior is in fact in compliance with the behavior that is expected based on the intent.

5.2.2. Intent Compliance Assessment

At the core of Intent Assurance are functions that compare the actual network behavior that is being monitored and observed with the intended behavior that is expected per the intent and is held by SSoT. These functions continuously assess and validate whether the observation indicates compliance with intent. This includes assessing the effectiveness of intent fulfillment actions, including verifying that the actions had the desired effect and assessing the magnitude of the effect as applicable. It can also include functions that perform analysis and aggregation of raw observation data. The results of the assessment can be fed back to facilitate learning functions that optimize outcomes.

Intent compliance assessment also includes assessing whether intent drift occurs over time. Intent drift can be caused by a control plane or lower-level management operations that inadvertently cause behavior changes which conflict with intent that was orchestrated earlier. Intent-Based Systems and Networks need to be able to detect when such drift occurs or is about to occur as well as assess the severity of the drift.

5.2.3. Intent Compliance Actions

When intent drift occurs or network behavior is inconsistent with desired intent, functions that are able to trigger corrective actions are needed. This includes actions needed to resolve intent drift and bring the network back into compliance. Alternatively, and where necessary, reporting functions need to be triggered that alert operators and provide them with the necessary information and tools to react appropriately, e.g., by helping them articulate modifications to the original intent to moderate between conflicting concerns.

5.2.4. Abstraction, Aggregation, Reporting

The outcome of Intent Assurance needs to be reported back to the user in ways that allow the user to relate the outcomes to their intent. This requires a set of functions that are able to analyze, aggregate, and abstract the results of the observations accordingly. In many cases, lower-level concepts such as detailed performance statistics and observations related to low-level settings need to be "up-leveled" to concepts the user can relate to and take action on.

The required aggregation and analysis functionality needs to be complemented with functions that report intent compliance status and provide adequate summarization and visualization to human users.

6. Lifecycle

Intent is subject to a lifecycle: it comes into being, may undergo changes over the course of time, and may at some point be retracted. This lifecycle is closely tied to various interconnection functions that are associated with the intent concept.

Figure 1 depicts an intent lifecycle and its main functions. The functions were introduced in Section 5 and are divided into two functional (horizontal) planes, reflecting the distinction between fulfillment and assurance. In addition, they are divided into three (vertical) spaces.

The spaces indicate the different perspectives and interactions with different roles that are involved in addressing the functions:



         User Space   :       Translation / IBS       :  Network Ops
                      :            Space              :     Space
                      :                               :
        +----------+  :  +----------+   +-----------+ : +-----------+
Fulfill |recognize/|---> |translate/|-->|  learn/   |-->| configure/|
        |generate  |     |          |   |  plan/    |   | provision |
        |intent    |<--- |  refine  |   |  render   | : |           |
        +----^-----+  :  +----------+   +-----^-----+ : +-----------+
             |        :                       |       :        |
.............|................................|................|.....
             |        :                  +----+---+   :        v
             |        :                  |validate|   :  +----------+
             |        :                  +----^---+ <----| monitor/ |
Assure   +---+---+    :  +---------+    +-----+---+   :  | observe/ |
         |report | <---- |abstract |<---| analyze | <----|          |
         +-------+    :  +---------+    |aggregate|   :  +----------+
                      :                 +---------+   :

Figure 1: Intent Lifecycle

When carefully inspecting the diagram, it becomes apparent that the intent lifecycle, in fact, involves two cycles, or loops:

7. Additional Considerations

Given the popularity of the term "intent," it is tempting to broaden it use to encompass also other related concepts, resulting in "intent-washing" that paints those concepts in a new light by simply applying new intent terminology to them. A common example concerns referring to the northbound interface of SDN controllers as "intent interface". However, in some cases, this actually makes sense not just as a marketing ploy but as a way to better relate previously existing and new concepts.

In that sense and regards to intent, it makes sense to distinguish various subcategories of intent as follows:

A comprehensive set of classifications of different concepts and categories of intent will be described in a separate document.

8. IANA Considerations

Not applicable

9. Security Considerations

This document describes concepts and definitions of Intent-Based Networking. As such, the below security considerations remain high level, i.e. in the form of principles, guidelines or requirements. More detailed security considerations will be described in the documents that specify the architecture and functionality.

Security in Intent-Based Networking can apply to different facets:

Securing the intent-based system aims at making the intent-based system operationally secure by implementing security mechanisms and applying security best practices. In the context of Intent-based Networking, such mechanisms and practices may consist in intent verification and validation; operations on intents by authenticated and authorized users only; protection against or detection of tampered intents. Such mechanisms may also include the introduction of multiple levels of intent. For example, intent related to securing the network should occur at a "deeper" level that overrides other levels of intent if necessary, and that is not subject to modification through regular operations but through ones that are specifically secured. Use of additional mechanisms such as explanation components that describe the security ramifications and trade-off should be considered as well.

Mitigating the effects of erroneous or compromised intents aims at making the intent-based system operationally safe by providing checkpoint and safeguard mechanisms and operating principles. In the context of Intent-based Networking, such mechanisms and principles may consist in the ability to automatically detect unintended, detrimental or abnormal behavior; the ability to automatically (and gracefully) rollback or fallback to a previous "safe" state; the ability to prevent or contain error amplification (due to the combination of a higher degree of automation and the intrinsic higher degree of freedom, ambiguity, and implicitly conveyed by intents); dynamic levels of supervision and reporting to make the user aware of the right information, at the right time with the right level of context. Erroneous or harmful intents may inadvertently propagate and compromise security. In addition, compromised intents, for example, intent forged by an inside attacker, may sabotage or harm the network resources and make them vulnerable to further, larger attacks, e.g., by defeating certain security mechanisms.

Expressing security policies or security-related parameters with intents consists of using the intent formalism (a high-level, declarative abstraction), or part(s) of an intent statement to define security-related aspects such as data governance, level(s) of confidentiality in data exchange, level(s) of availability of system resources, of protection in forwarding paths, of isolation in processing functions, level(s) of encryption, authorized entities for given operations, etc.

The development and introduction of Intent-Based Networking in operational environments will certainly create new security concerns. Such security concerns have to be anticipated at the design and specification time. However, Intent-Based Networking may also be used as an enabler for better security. For instance, security and privacy rules could be expressed in a more human-friendly and generic way and be less technology-specific and less complex, leading to fewer low-level configuration mistakes. The detection of threats or attacks could also be made more simple and comprehensive thanks to conflict detection at higher-level or at coarser granularity

More thorough security analyses should be conducted as our understanding of Intent-Based Networking technology matures.

10. Acknowledgments

We would like to thank the members of the IRTF Network Management Research Group (NMRG) for many valuable discussions and feedback. In particular, we would like to acknowledge the feedback and support from Remi Badonnel, Walter Cerroni, Marinos Charalambides, Luis Contreras, Jerome Francois, Molka Gharbaoui, Olga Havel, Chen Li, William Liu, Barbara Martini, Stephen Mwanje, Jeferson Nobre, Haoyu Song, Peter Szilagyi, and Csaba Vulkan. Of those, we would like to thank the following persons who went one step further and also provided reviews of the document: Remi Badonnel, Walter Cerroni, Jerome Francois, Molka Gharbaoui, Barbara Martini, Stephen Mwanje, Peter Szilagyi, and Csaba Vulkan.

11. Informative References

[Boutaba07]
Boutaba, R. and I. Aib, "Policy-Based Management: A Historical perspective. Journal of Network and Systems Management (JNSM), Springer, Vol. 15 (4).", .
[Clemm20]
Clemm, A., Faten Zhani, M., and R. Boutaba, "Network Management 2030: Operations and Control of Network 2030 Services. Journal of Network and Systems Management (JNSM), Springer, Vol. 28 (4).", .
[Gharbaoui21]
Gharbaoui, M., Martini, B., and P. Castoldi, ""Implementation of an Intent Layer for SDN-enabled and QoS-aware Network Slicing", in IEEE 7th Int. Conference on Network Softwarization (NetSoft), pp 17-23, doi: 10.1109/NetSoft51509.2021.9492643", .
[I-D.ietf-teas-ietf-network-slice-definition]
Rokui, R., Homma, S., Makhijani, K., Contreras, L. M., and J. Tantsura, "Definition of IETF Network Slices", Work in Progress, Internet-Draft, draft-ietf-teas-ietf-network-slice-definition-01, , <https://www.ietf.org/archive/id/draft-ietf-teas-ietf-network-slice-definition-01.txt>.
[I-D.ietf-teas-te-service-mapping-yang]
Lee, Y., Dhody, D., Fioccola, G., Wu, Q., Ceccarelli, D., and J. Tantsura, "Traffic Engineering (TE) and Service Mapping YANG Model", Work in Progress, Internet-Draft, draft-ietf-teas-te-service-mapping-yang-10, , <https://www.ietf.org/archive/id/draft-ietf-teas-te-service-mapping-yang-10.txt>.
[IEEE-TITS21]
Garg, S., "Special Issue on Intent-Based Networking for 5G-Envisioned Internet of Connected Vehicles, in IEEE Transactions on Intelligent Transportation Systems, vol. 22, no. 8, DOI: 10.1109/TITS.2021.3101259", .
[IEEEXPLORE]
IEEE, "IEEE eXplore, https://ieeexplore.ieee.org/", .
[Lenrow15]
Lenrow, D., "Intent As The Common Interface to Network Resources, Intent Based Network Summit 2015 ONF Boulder: IntentNBI", .
[M3010]
ITU-T, "M.3010 : Principles for a telecommunications management network.", .
[MDPI22]
Gharbaoui, M., "Special Issue "Intent-Based Software-Defined Networks", in Computers (MDPI) (to appear)", .
[Pang20]
Pang, L., Yang, C., Chen, D., Song, Y., and M. Guizan, "A Survey on Intent-Driven Networks", in IEEE Access Vol 8 pp. 22862-22873, DOI: 10:110/ACCESS.2020.2969208", .
[RFC3411]
Harrington, D., Presuhn, R., and B. Wijnen, "An Architecture for Describing Simple Network Management Protocol (SNMP) Management Frameworks", STD 62, RFC 3411, DOI 10.17487/RFC3411, , <https://www.rfc-editor.org/info/rfc3411>.
[RFC7575]
Behringer, M., Pritikin, M., Bjarnason, S., Clemm, A., Carpenter, B., Jiang, S., and L. Ciavaglia, "Autonomic Networking: Definitions and Design Goals", RFC 7575, DOI 10.17487/RFC7575, , <https://www.rfc-editor.org/info/rfc7575>.
[RFC7950]
Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", RFC 7950, DOI 10.17487/RFC7950, , <https://www.rfc-editor.org/info/rfc7950>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8299]
Wu, Q., Ed., Litkowski, S., Tomotaki, L., and K. Ogaki, "YANG Data Model for L3VPN Service Delivery", RFC 8299, DOI 10.17487/RFC8299, , <https://www.rfc-editor.org/info/rfc8299>.
[RFC8309]
Wu, Q., Liu, W., and A. Farrel, "Service Models Explained", RFC 8309, DOI 10.17487/RFC8309, , <https://www.rfc-editor.org/info/rfc8309>.
[RFC8345]
Clemm, A., Medved, J., Varga, R., Bahadur, N., Ananthakrishnan, H., and X. Liu, "A YANG Data Model for Network Topologies", RFC 8345, DOI 10.17487/RFC8345, , <https://www.rfc-editor.org/info/rfc8345>.
[RFC8994]
Eckert, T., Ed., Behringer, M., Ed., and S. Bjarnason, "An Autonomic Control Plane (ACP)", RFC 8994, DOI 10.17487/RFC8994, , <https://www.rfc-editor.org/info/rfc8994>.
[Sloman94]
Sloman, M., "Policy Driven Management for Distributed Systems. Journal of Network and Systems Management (JNSM), Springer, Vol. 2 (4).", .
[Strassner03]
Strassner, J., "Policy-Based Network Management. Elsevier.", .
[TR523]
Foundation, O. N., "Intent NBI - Definition and Principles. ONF TR-523.", .
[WIN21]
Ciavaglia, L. and E. Renault, "1st IEEE International Workshop on Intent-Based Networking, https://netsoft2021.ieee-netsoft.org/program/workshops/win-2021/", .

Authors' Addresses

Alexander Clemm
Futurewei
2330 Central Expressway
Santa Clara,, CA 95050
United States of America
Laurent Ciavaglia
Rakuten Mobile
Lisandro Zambenedetti Granville
Federal University of Rio Grande do Sul (UFRGS)
Av. Bento Gonçalves
Porto Alegre-
9500
Brazil
Jeff Tantsura
Microsoft