In-situ OAM IPv6 Options
draft-ioametal-ippm-6man-ioam-ipv6-options-01

Abstract

In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in the packet while the packet traverses a path between two points in the network. This document outlines how IOAM data fields are encapsulated in IPv6.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on April 23, 2019.

Copyright Notice

Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

Table of Contents

• 1. Introduction
• 2. Conventions
• 2.1. Requirements Language
• 2.2. Abbreviations
• 3. In-situ OAM Metadata Transport in IPv6
• 4. Security Considerations
• 5. IANA Considerations
• 6. Acknowledgements
• 7. References
• 7.1. Normative References
• 7.2. Informative References
• Authors' Addresses

1. Introduction

In-situ Operations, Administration, and Maintenance (IOAM) records operational and telemetry information in the packet while the packet traverses a path between two points in the network. This document outlines how IOAM data fields are encapsulated in the IPv6 [RFC8200].

2. Conventions

2.1. Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2.2. Abbreviations

Abbreviations used in this document:

E2E:

Edge-to-Edge

IOAM:

In-situ Operations, Administration, and Maintenance

OAM:

Operations, Administration, and Maintenance

POT:

Proof of Transit

3. In-situ OAM Metadata Transport in IPv6

IOAM data is carried in IPv6 packets as Hop-by-Hop or Destination options. One IPv6 Destination Options and Hop-by-Hop Options Type codepoint is assigned for IOAM. Multiple options with the same Option Type MAY appear in the same Hop-by-Hop Options or Destination Options header, with varying content. This mechanism of in-situ OAM in IPv6 is used to enhance diagnostics of IPv6 networks. It complements other mechanisms proposed to enhance diagnostics of IPv6 networks, such as the IPv6 Performance and Diagnostic Metrics Destination Option described in [RFC8250].

+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|  Option Type  |  Opt Data Len |   Reserved    |   IOAM Type   |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+
|                                                               |  |
.                                                               .  I
.                     Option Data                               .  O
.                                                               .  A
.                                                               .  M
.                                                               .  .
.                                                               .  O
.                                                               .  P
.                                                               .  T
.                                                               .  I
.                                                               .  O
.                                                               .  N
.                                                               .  |
|                                                               |  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+<-+

IPv6 Hop-by-Hop and Destination Option format for carrying in-situ OAM data fields:

Option Type:

8-bit identifier of the type of option.

Opt Data Len:

8-bit unsigned integer. Length of the Reserved and Option Data field of this option, in octets.

Reserved:

8-bit field MUST be set to zero upon transmission and ignored upon reception.

IOAM Type:

8-bit field as defined in section 7.2 in [I-D.ietf-ippm-ioam-data].

Option Data:

Variable-length field. Option-Type-specific data.

In-situ OAM Options are inserted as Option data as follows:[I-D.ietf-ippm-ioam-data] such as transit delay are aligned at a multiple-of-4 offset from the start of the Hop-by-Hop Options header. In addition, to maintain IPv6 extension header 8-octet alignment and avoid the need to add or remove padding at every hop, the Trace-Type for Incremental Tracing Option in IPv6 MUST be selected such that the IOAM node data length is a multiple of 8-octets.

1. Pre-allocated Tracing Option: The in-situ OAM Preallocated Tracing option defined in [I-D.ietf-ippm-ioam-data] is represented as a IPv6 option in hop by hop extension header:

   Option Type:

   001xxxxx 8-bit identifier of the IOAM type of option. xxxxx=TBD.

   IOAM Type:

   IOAM Pre-allocated Trace Option Type.

2. Incremental Tracing Option: The in-situ OAM Incremental Tracing option defined in [I-D.ietf-ippm-ioam-data] is represented as a IPv6 option in hop by hop extension header:

   Option Type:

   001xxxxx 8-bit identifier of the IOAM type of option. xxxxx=TBD.

   IOAM Type:

   IOAM Incremental Trace Option Type.

3. Proof of Transit Option: The in-situ OAM POT option defined in [I-D.ietf-ippm-ioam-data] is represented as a IPv6 option in hop by hop extension header:

   Option Type:

   001xxxxx 8-bit identifier of the IOAM type of option. xxxxx=TBD.

   IOAM Type:

   IOAM POT Option Type.

4. Edge to Edge Option: The in-situ OAM E2E option defined in [I-D.ietf-ippm-ioam-data] is represented as a IPv6 option in IPv6 option in destination options extension header:

   Option Type:

   000xxxxx 8-bit identifier of the IOAM type of option. xxxxx=TBD.

   IOAM Type:

   IOAM E2E Option Type.

All the in-situ OAM IPv6 options defined here have alignment requirements. Specifically, they all require 4n alignment. This ensures that 4 octet fields specified in

4. Security Considerations

This document describes the encapsulation of IOAM data fields in IPv6. Security considerations of the specific IOAM data fields for each case (i.e., Trace, Proof of Transit, and E2E) are described in defined in [I-D.ietf-ippm-ioam-data].

As this document describes new options for IPv6 , these are similar to the security considerations of [RFC8200] and the new weakness documented in [RFC8250].

5. IANA Considerations

This draft requests the following IPv6 Option Type assignments from the Destination Options and Hop-by-Hop Options sub-registry of Internet Protocol Version 6 (IPv6) Parameters.

http://www.iana.org/assignments/ipv6-parameters/ipv6- parameters.xhtml#ipv6-parameters-2

   Hex Value    Binary Value      Description           Reference
                act chg rest
   ----------------------------------------------------------------
   TBD_1_0      00   0  TBD_1     IOAM                  [This draft]
   TBD_1_1      00   1  TBD_1     IOAM                  [This draft]

6. Acknowledgements

The authors would like to thank Tom Herbert, Eric Vyncke, Nalini Elkins, Srihari Raghavan, Ranganathan T S, Karthik Babu Harichandra Babu, Akshaya Nadahalli, Stefano Previdi, Hemant Singh, Erik Nordmark, LJ Wobker, and Andrew Yourtchenko for the comments and advice. For the IPv6 encapsulation, this document leverages concepts described in [I-D.kitamura-ipv6-record-route]. The authors would like to acknowledge the work done by the author Hiroshi Kitamura and people involved in writing it.

7. References

7.1. Normative References

7.2. Informative References

Authors' Addresses