SUIT H. Tschofenig Internet-Draft Arm Limited Intended status: Standards Track R. Housley Expires: 12 January 2023 Vigil Security B. Moran Arm Limited 11 July 2022 Firmware Encryption with SUIT Manifests draft-ietf-suit-firmware-encryption-06 Abstract This document specifies a firmware update mechanism where the firmware image is encrypted. Firmware encryption uses the IETF SUIT manifest with key establishment provided by hybrid public-key encryption (HPKE) and AES Key Wrap (AES-KW). HPKE uses public key cryptography while AES-KW uses a pre-shared key-encryption key. Encryption of the firmware image is accomplished with convential symmetric key cryptography. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 12 January 2023. Copyright Notice Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights Tschofenig, et al. Expires 12 January 2023 [Page 1] Internet-Draft Firmware Encryption July 2022 and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Conventions and Terminology . . . . . . . . . . . . . . . . . 4 3. Architecture . . . . . . . . . . . . . . . . . . . . . . . . 4 4. SUIT Envelope and SUIT Manifest . . . . . . . . . . . . . . . 6 5. AES Key Wrap . . . . . . . . . . . . . . . . . . . . . . . . 7 6. Hybrid Public-Key Encryption (HPKE) . . . . . . . . . . . . . 11 7. CEK Verification . . . . . . . . . . . . . . . . . . . . . . 12 8. Ciphers without Integrity Protection . . . . . . . . . . . . 12 9. Complete Examples . . . . . . . . . . . . . . . . . . . . . . 13 10. Security Considerations . . . . . . . . . . . . . . . . . . . 13 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 14 12. References . . . . . . . . . . . . . . . . . . . . . . . . . 14 12.1. Normative References . . . . . . . . . . . . . . . . . . 14 12.2. Informative References . . . . . . . . . . . . . . . . . 15 Appendix A. Acknowledgements . . . . . . . . . . . . . . . . . . 16 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 16 1. Introduction Vulnerabilities with Internet of Things (IoT) devices have raised the need for a reliable and secure firmware update mechanism that is also suitable for constrained devices. To protect firmware images the SUIT manifest format was developed [I-D.ietf-suit-manifest]. The SUIT manifest provides a bundle of metadata about the firmware for an IoT device, where to find the firmware image, and the devices to which it applies. Tschofenig, et al. Expires 12 January 2023 [Page 2] Internet-Draft Firmware Encryption July 2022 The SUIT information model [RFC9124] details the information that has to be offered by the SUIT manifest format. In addition to offering protection against modification, which is provided by a digital signature or a message authentication code, the firmware image may also be afforded confidentiality using encryption. Encryption prevents third parties, including attackers, from gaining access to the firmware binary. Hackers typically need intimate knowledge of the target firmware to mount their attacks. For example, return-oriented programming (ROP) requires access to the binary and encryption makes it much more difficult to write exploits. The SUIT manifest provides the data needed for authorized recipients of the firmware image to decrypt it. The firmware image is encrypted using a symmetric key. This symmetric cryptographic key is established for encryption and decryption, and that key can be applied to a SUIT manifest, firmware images, or personalization data, depending on the encryption choices of the firmware author. A symmetric key can be established using a variety of mechanisms; this document defines two approaches for use with the IETF SUIT manifest, namely: * hybrid public-key encryption (HPKE), and * AES Key Wrap (AES-KW) using a pre-shared key-encryption key (KEK). These choices reduce the number of possible key establishment options and thereby help increase interoperability between different SUIT manifest parser implementations. The document also contains a number of examples. The main use case of this document is to encrypt firmware. However, SUIT manifests may require other payloads than firmware images to experience confidentiality protection using encryption, for example personalization data, configuration data, or machine learning models. While the term firmware is used throughout the document, plaintext other than firmware images may get encrypted using the described mechanism. Hence, the terms firmware (image) and plaintext are used interchangably. Tschofenig, et al. Expires 12 January 2023 [Page 3] Internet-Draft Firmware Encryption July 2022 2. Conventions and Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. This document assumes familiarity with the IETF SUIT manifest [I-D.ietf-suit-manifest], the SUIT information model [RFC9124] and the SUIT architecture [RFC9019]. The terms sender and recipient are defined in [RFC9180] and have the following meaning: * Sender: Role of entity which sends an encrypted message. * Recipient: Role of entity which receives an encrypted message. Additionally, the following abbreviations are used in this document: * Key Wrap (KW), defined in RFC 3394 [RFC3394] for use with AES. * Key-encryption key (KEK), a term defined in RFC 4949 [RFC4949]. * Content-encryption key (CEK), a term defined in RFC 2630 [RFC2630]. * Hybrid Public Key Encryption (HPKE), defined in [RFC9180]. 3. Architecture [RFC9019] describes the architecture for distributing firmware images and manifests from the author to the firmware consumer. It does, however, not detail the use of encrypted firmware images. This document enhances the SUIT architecture to include firmware encryption. Figure 1 shows the distribution system, which represents the firmware server and the device management infrastructure. The distribution system is aware of the individual devices to which a firmware update has to be delivered. Tschofenig, et al. Expires 12 January 2023 [Page 4] Internet-Draft Firmware Encryption July 2022 +----------+ | | | Author | | | +----------+ +----------+ | Device |---+ | |(Firmware | | | Firmware + | Consumer)| | | Manifest +----------+ | | | | | +--------------+ | | | +----------+ | Firmware + Manifest | Distribution | | Device |---+------------------------| System | |(Firmware | | | | | Consumer)| | | | +----------+ | +--------------+ | | +----------+ | | Device +---+ |(Firmware | | Consumer)| +----------+ Figure 1: Firmware Encryption Architecture. Firmware encryption requires the sender to know the firmware consumers and the respective credentials used by the key distribution mechanism. For AES-KW the KEK needs to be known and, in case of HPKE, the sender needs to be in possession of the public key of the recipient. The firmware author may have knowledge about all devices that need to receive an encrypted firmware image but in most cases this is not likely. The distribution system certainly has the knowledge about the recipients to perform firmware encryption. To offer confidentiality protection for firmware images two deployment variants need to be supported: * The firmware author acts as the sender and the recipient is the firmware consumer (or the firmware consumers). * The firmware author encrypts the firmware image with the distribution system as the initial recipient. Then, the distribution system decrypts and re-encrypts the firmware image towards the firmware consumer(s). Delegating the task of re- Tschofenig, et al. Expires 12 January 2023 [Page 5] Internet-Draft Firmware Encryption July 2022 encrypting the firmware image to the distribution system offers flexiblity when the number of devices that need to receive encrypted firmware images changes dynamically or when updates to KEKs or recipient public keys are necessary. As a downside, the author needs to trust the distribution system with performing the re-encryption of the firmware image. Irrespectively of the two variants, the key distribution data (in form of the COSE_Encrypt structure) is included in the SUIT envelope rather than in the SUIT manifest since the manifest will be digitally signed (or MACed) by the firmware author. Since the SUIT envelope is not protected cryptographically an adversary could modify the COSE_Encrypt structure. For example, if the attacker alters the key distribution data then a recipient will decrypt the firmware image with an incorrect key. This will lead to expending energy and flash cycles until the failure is detected. To mitigate this attack, the optional suit-cek-verification parameter is added to the manifest. Since the manifest is protected by a digital signature (or a MAC), an adversary cannot successfully modify this value. This parameter allows the recipient to verify whether the CEK has successfully been derived. Details about the changes to the envelope and the manifest can be found in the next section. 4. SUIT Envelope and SUIT Manifest This specification introduces two extensions to the SUIT envelope and the manifest structure, as motivated in Section 3. The SUIT envelope is enhanced with a key exchange payload, which is carried inside the suit-protection-wrappers parameter, see Figure 2. One or multiple SUIT_Encryption_Info payload(s) are carried within the suit-protection-wrappers parameter. The content of the SUIT_Encryption_Info payload is explained in Section 5 (for AES-KW) and in Section 6 (for HPKE). When the encryption capability is used, the suit-protection-wrappers parameter MUST be included in the envelope. Tschofenig, et al. Expires 12 January 2023 [Page 6] Internet-Draft Firmware Encryption July 2022 SUIT_Envelope_Tagged = #6.107(SUIT_Envelope) SUIT_Envelope = { suit-authentication-wrapper => bstr .cbor SUIT_Authentication, suit-manifest => bstr .cbor SUIT_Manifest, SUIT_Severable_Manifest_Members, suit-protection-wrappers => bstr .cbor { *(int/str) => [+ SUIT_Encryption_Info] } * SUIT_Integrated_Payload, * SUIT_Integrated_Dependency, * $$SUIT_Envelope_Extensions, * (int => bstr) } Figure 2: SUIT Envelope CDDL. The manifest is extended with a CEK verification parameter (called suit-cek-verification), see Figure 3. This parameter is optional and is utilized in environments where battery exhaustion attacks are a concern. Details about the CEK verification can be found in Section 7. SUIT_Manifest = { suit-manifest-version => 1, suit-manifest-sequence-number => uint, suit-common => bstr .cbor SUIT_Common, ? suit-reference-uri => tstr, SUIT_Severable_Members_Choice, SUIT_Unseverable_Members, * $$SUIT_Manifest_Extensions, } SUIT_Parameters //= (suit-parameter-cek-verification => bstr) Figure 3: SUIT Manifest CDDL. 5. AES Key Wrap The AES Key Wrap (AES-KW) algorithm is described in RFC 3394 [RFC3394], and it can be used to encrypt a randomly generated content-encryption key (CEK) with a pre-shared key-encryption key (KEK). The COSE conventions for using AES-KW are specified in Section 12.2.1 of [RFC8152]. The encrypted CEK is carried in the COSE_recipient structure alongside the information needed for AES-KW. The COSE_recipient structure, which is a substructure of the COSE_Encrypt structure, contains the CEK encrypted by the KEK. Tschofenig, et al. Expires 12 January 2023 [Page 7] Internet-Draft Firmware Encryption July 2022 When the firmware image is encrypted for use by multiple recipients, there are three options. We use the following notation KEK(R1,S) is the KEK shared between recipient R1 and the sender S. Likewise, CEK(R1,S) is shared between R1 and S. If a single CEK or a single KEK is shared with all authorized recipients R by a given sender S in a certain context then we use CEK(_,S) or KEK(_,S), respectively. The notation ENC(plaintext, key) refers to the encryption of plaintext with a given key. * If all authorized recipients have access to the KEK, a single COSE_recipient structure contains the encrypted CEK. This means KEK(*,S) ENC(CEK,KEK), and ENC(firmware,CEK). * If recipients have different KEKs, then multiple COSE_recipient structures are included but only a single CEK is used. Each COSE_recipient structure contains the CEK encrypted with the KEKs appropriate for the recipient. In short, KEK_1(R1, S),..., KEK_n(Rn, S), ENC(CEK, KEK_i) for i=1 to n, and ENC(firmware,CEK). The benefit of this approach is that the firmware image is encrypted only once with a CEK while there is no sharing of the KEK accross recipients. Hence, authorized recipients still use their individual KEKs to decrypt the CEK and to subsequently obtain the plaintext firmware. * The third option is to use different CEKs encrypted with KEKs of the authorized recipients. Assume there are KEK_1(R1, S),..., KEK_n(Rn, S), and for i=1 to n the following computations need to be made: ENC(CEK_i, KEK_i) and ENC(firmware,CEK_i). This approach is appropriate when no benefits can be gained from encrypting and transmitting firmware images only once. For example, firmware images may contain information unique to a device instance. Note that the AES-KW algorithm, as defined in Section 2.2.3.1 of [RFC3394], does not have public parameters that vary on a per- invocation basis. Hence, the protected structure in the COSE_recipient is a byte string of zero length. The COSE_Encrypt conveys information for encrypting the firmware image, which includes information like the algorithm and the IV, even though the firmware image is not embedded in the COSE_Encrypt.ciphertext itself since it conveyed as detached content. The CDDL for the COSE_Encrypt_Tagged structure is shown in Figure 4. Tschofenig, et al. Expires 12 January 2023 [Page 8] Internet-Draft Firmware Encryption July 2022 COSE_Encrypt_Tagged = #6.96(COSE_Encrypt) SUIT_Encryption_Info = COSE_Encrypt_Tagged COSE_Encrypt = [ protected : bstr .cbor outer_header_map_protected, unprotected : outer_header_map_unprotected, ciphertext : null, ; because of detached ciphertext recipients : [ + COSE_recipient ] ] outer_header_map_protected = { 1 => int, ; algorithm identifier * label =values ; extension point } outer_header_map_unprotected = { 5 => bstr, ; IV * label =values ; extension point } COSE_recipient = [ protected : bstr .size 0, unprotected : recipient_header_map, ciphertext : bstr ; CEK encrypted with KEK ] recipient_header_map = { 1 => int, ; algorithm identifier 4 => bstr, ; key identifier * label =values ; extension point } Figure 4: CDDL for AES Key Wrap Encryption The COSE specification requires a consistent byte stream for the authenticated data structure to be created, which is shown in Figure 5. Enc_structure = [ context : "Encrypt", protected : empty_or_serialized_map, external_aad : bstr ] Tschofenig, et al. Expires 12 January 2023 [Page 9] Internet-Draft Firmware Encryption July 2022 Figure 5: CDDL for Enc_structure Data Structure As shown in Figure 4, there are two protected fields: one protected field in the COSE_Encrypt structure and a second one in the COSE_recipient structure. The 'protected' field in the Enc_structure, see Figure 5, refers to the content of the protected field from the COSE_Encrypt structure. The value of the external_aad MUST be set to null. The following example illustrates the use of the AES-KW algorithm with AES-128. We use the following parameters in this example: * IV: 0x26, 0x68, 0x23, 0x06, 0xd4, 0xfb, 0x28, 0xca, 0x01, 0xb4, 0x3b, 0x80 * KEK: "aaaaaaaaaaaaaaaa" * KID: "kid-1" * Plaintext Firmware: "This is a real firmware image." * Firmware (hex): 546869732069732061207265616C206669726D7761726520696D6167652E The COSE_Encrypt structure, in hex format, is (with a line break inserted): D8608443A10101A1054C26682306D4FB28CA01B43B80F68340A2012204456B69642D 315818AF09622B4F40F17930129D18D0CEA46F159C49E7F68B644D The resulting COSE_Encrypt structure in a dignostic format is shown in Figure 6. Tschofenig, et al. Expires 12 January 2023 [Page 10] Internet-Draft Firmware Encryption July 2022 96( [ / protected field with alg=AES-GCM-128 / h'A10101', { / unprotected field with iv / 5: h'26682306D4FB28CA01B43B80' }, / null because of detached ciphertext / null, [ / recipients array / h'', / protected field / { / unprotected field / 1: -3, / alg=A128KW / 4: h'6B69642D31' / key id / }, / CEK encrypted with KEK / h'AF09622B4F40F17930129D18D0CEA46F159C49E7F68B644D' ] ] ) Figure 6: COSE_Encrypt Example for AES Key Wrap The CEK, in hex format, was "4C805F1587D624ED5E0DBB7A7F7FA7EB" and the encrypted firmware (with a line feed added) was: A8B6E61EF17FBAD1F1BF3235B3C64C06098EA512223260 F9425105F67F0FB6C92248AE289A025258F06C2AD70415 6. Hybrid Public-Key Encryption (HPKE) Hybrid public-key encryption (HPKE) [RFC9180] is a scheme that provides public key encryption of arbitrary-sized plaintexts given a recipient's public key. For use with firmware encryption the scheme works as follows: HPKE, which internally utilizes a non-interactive ephemeral-static Diffie- Hellman exchange to derive a shared secret, is used to encrypt a CEK. This CEK is subsequently used to encrypt the firmware image. Hence, the plaintext passed to HPKE is the randomly generated CEK. The output of the HPKE SealBase function is therefore the encrypted CEK along with HPKE encapsulated key (i.e. the ephemeral ECDH public key). Only the holder of recipient's private key can decapsulate the CEK to decrypt the firmware. Key generation in HPKE is influced by additional parameters, such as identity information. Tschofenig, et al. Expires 12 January 2023 [Page 11] Internet-Draft Firmware Encryption July 2022 This approach allows all recipients to use the same CEK to encrypt the firmware image, in case there are multiple recipients, to fulfill a requirement for the efficient distribution of firmware images using a multicast or broadcast protocol. [I-D.ietf-cose-hpke] defines the use of HPKE with COSE and provides examples. 7. CEK Verification The suit-cek-verification parameter contains a byte string resulting from the encryption of 8 bytes of 0xA5 using the CEK with a nonce of all zeros and empty additional data using the cipher algorithm and mode also used to encrypt the plaintext. As explained in Section 3, the suit-cek-verification parameter is optional to implement and optional to use. When used, it reduces the risk of an battery exhaustion attack against the IoT device. 8. Ciphers without Integrity Protection The ability to restart an interrupted firmware update is often a requirement for low-end IoT devices. To fulfill this requirement it is necessary to chunk a larger firmware image into blocks and to encrypt each block individually using a cipher that does not increase the size of the resulting ciphertext (i.e. by not adding an authentication tag after each encrypted block). When the encrypted firmware image has been transferred to the device, it will typically be stored in a staging area. Then, the bootloader starts decrypting the downloaded image block-by-block and swaps it with the currently valid image. Note that the currently valid image is available in cleartext and hence it has to be re-encrypted before copying it to the staging area. This approach of swapping the newly downloaded image with the previously valid image is often referred as A/B approach. A/B refers to the two storage areas, sometimes called slots, involved. Two slots are used to allow the update to be reversed in case the newly obtained firmware image fails to boot. This approach adds robustness to the firmware update procedure. When an update gets aborted while the bootloader is decrypting the newly obtained image and swapping the blocks, the bootloader can restart where it left off. This technique again offers robustness. Tschofenig, et al. Expires 12 January 2023 [Page 12] Internet-Draft Firmware Encryption July 2022 To accomplish this functionality, ciphers without integrity protection are used to encrypt the firmware image. Integrity protection for the firmware image is, however, important and therefore the image digest defined in [I-D.ietf-suit-manifest] MUST be used. This document registers several cipher algorithms for use with firmware encryption that do not offer integrity protection. These ciphers are registered within the COSE algorithm registry but are dedicated for this specific applications only. Hence, all algorithms listed in Figure 7 are not recommended for general use. +===========+=====+===========+==============+=========+============+ | Name |Value|Description| Capabilities |Reference|Recommended | +===========+=====+===========+==============+=========+============+ |AES-128-CBC| 35 | AES 128 | [] | [This |No | | | | CBC Mode | |Document]| | | | | | | | | +-----------+-----+-----------+--------------+---------+------------+ |AES-256-CBC| 36 | AES 256 | [] | [This |No | | | | CBC Mode | |Document]| | | | | | | | | +-----------+-----+-----------+--------------+---------+------------+ |AES-128-CTR| 37 | AES 128 | [] | [This |No | | | | Counter | |Document]| | | | | Mode (CTR)| | | | +-----------+-----+-----------+--------------+---------+------------+ |AES-256-CTR| 38 | AES 256 | [] | [This |No | | | | Counter | |Document]| | | | | Mode (CTR)| | | | +-----------+-----+-----------+--------------+---------+------------+ Figure 7: Algorithms for the COSE Algorithm Registry 9. Complete Examples [[Editor's Note: Add examples for a complete manifest here (including a digital signature), multiple recipients, encryption of manifests (in comparison to firmware images).]] 10. Security Considerations The algorithms described in this document assume that the party performing the firmware encryption * shares a key-encryption key (KEK) with the firmware consumer (for use with the AES-Key Wrap scheme), or Tschofenig, et al. Expires 12 January 2023 [Page 13] Internet-Draft Firmware Encryption July 2022 * is in possession of the public key of the firmware consumer (for use with HPKE). Both cases require some upfront communication interaction, which is not part of the SUIT manifest. This interaction is likely provided by an IoT device management solution, as described in [RFC9019]. For AES-Key Wrap to provide high security it is important that the KEK is of high entropy, and that implementations protect the KEK from disclosure. Compromise of the KEK may result in the disclosure of all key data protected with that KEK. Since the CEK is randomly generated, it must be ensured that the guidelines for random number generations are followed, see [RFC8937]. In some cases third party companies analyse binaries for known security vulnerabilities. With encrypted firmware images this type of analysis is prevented. Consequently, these third party companies either need to be given access to the plaintext binary before encryption or they need to become authorized recipients of the encrypted firmware images. In either case, it is necessary to explicitly consider those third parties in the software supply chain when such a binary analysis is desired. 11. IANA Considerations This document asks IANA to register new values into the COSE algorithm registry. The values are listed in Figure 7. 12. References 12.1. Normative References [I-D.ietf-cose-hpke] Tschofenig, H., Housley, R., and B. Moran, "Use of Hybrid Public-Key Encryption (HPKE) with CBOR Object Signing and Encryption (COSE)", Work in Progress, Internet-Draft, draft-ietf-cose-hpke-02, 11 July 2022, . Tschofenig, et al. Expires 12 January 2023 [Page 14] Internet-Draft Firmware Encryption July 2022 [I-D.ietf-suit-manifest] Moran, B., Tschofenig, H., Birkholz, H., and K. Zandberg, "A Concise Binary Object Representation (CBOR)-based Serialization Format for the Software Updates for Internet of Things (SUIT) Manifest", Work in Progress, Internet- Draft, draft-ietf-suit-manifest-17, 28 April 2022, . [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC3394] Schaad, J. and R. Housley, "Advanced Encryption Standard (AES) Key Wrap Algorithm", RFC 3394, DOI 10.17487/RFC3394, September 2002, . [RFC8152] Schaad, J., "CBOR Object Signing and Encryption (COSE)", RFC 8152, DOI 10.17487/RFC8152, July 2017, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC9180] Barnes, R., Bhargavan, K., Lipp, B., and C. Wood, "Hybrid Public Key Encryption", RFC 9180, DOI 10.17487/RFC9180, February 2022, . 12.2. Informative References [RFC2630] Housley, R., "Cryptographic Message Syntax", RFC 2630, DOI 10.17487/RFC2630, June 1999, . [RFC4949] Shirey, R., "Internet Security Glossary, Version 2", FYI 36, RFC 4949, DOI 10.17487/RFC4949, August 2007, . [RFC8937] Cremers, C., Garratt, L., Smyshlyaev, S., Sullivan, N., and C. Wood, "Randomness Improvements for Security Protocols", RFC 8937, DOI 10.17487/RFC8937, October 2020, . Tschofenig, et al. Expires 12 January 2023 [Page 15] Internet-Draft Firmware Encryption July 2022 [RFC9019] Moran, B., Tschofenig, H., Brown, D., and M. Meriac, "A Firmware Update Architecture for Internet of Things", RFC 9019, DOI 10.17487/RFC9019, April 2021, . [RFC9124] Moran, B., Tschofenig, H., and H. Birkholz, "A Manifest Information Model for Firmware Updates in Internet of Things (IoT) Devices", RFC 9124, DOI 10.17487/RFC9124, January 2022, . Appendix A. Acknowledgements We would like to thank Henk Birkholz for his feedback on the CDDL description in this document. Additionally, we would like to thank Michael Richardson and Carsten Bormann for their review feedback. Finally, we would like to thank Dick Brooks for making us aware of the challenges firmware encryption imposes on binary analysis. Authors' Addresses Hannes Tschofenig Arm Limited Email: hannes.tschofenig@arm.com Russ Housley Vigil Security, LLC Email: housley@vigilsec.com Brendan Moran Arm Limited Email: Brendan.Moran@arm.com Tschofenig, et al. Expires 12 January 2023 [Page 16]