SUIT B. Moran
Internet-Draft Arm Limited
Intended status: Informational M. Meriac
Expires: July 20, 2019 Consultant
H. Tschofenig
Arm Limited
D. Brown
Linaro
January 16, 2019

A Firmware Update Architecture for Internet of Things Devices
draft-ietf-suit-architecture-02

Abstract

Vulnerabilities with Internet of Things (IoT) devices have raised the need for a solid and secure firmware update mechanism that is also suitable for constrained devices. Incorporating such update mechanism to fix vulnerabilities, to update configuration settings as well as adding new functionality is recommended by security experts.

This document lists requirements and describes an architecture for a firmware update mechanism suitable for IoT devices. The architecture is agnostic to the transport of the firmware images and associated meta-data.

This version of the document assumes asymmetric cryptography and a public key infrastructure. Future versions may also describe a symmetric key approach for very constrained devices.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on July 20, 2019.

Copyright Notice

Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.


Table of Contents

1. Introduction

When developing IoT devices, one of the most difficult problems to solve is how to update the firmware on the device. Once the device is deployed, firmware updates play a critical part in its lifetime, particularly when devices have a long lifetime, are deployed in remote or inaccessible areas where manual intervention is cost prohibitive or otherwise difficult. Updates to the firmware of an IoT device are done to fix bugs in software, to add new functionality, and to re-configure the device to work in new environments or to behave differently in an already deployed context.

The firmware update process, among other goals, has to ensure that

More details about the security goals are discussed in Section 5 and requirements are described in Section 3.

2. Conventions and Terminology

The key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “NOT RECOMMENDED”, “MAY”, and “OPTIONAL” in this document are to be interpreted as described in RFC 2119 [RFC2119].

This document uses the following terms:

The following entities are used:

In addition to the entities in the list above there is an orthogonal infrastructure with a Trust Provisioning Authority (TPA) distributing trust anchors and authorization permissions to various entities in the system. The TPA may also delegate rights to install, update, enhance, or delete trust anchors and authorization permissions to other parties in the system. This infrastructure overlaps the communication architecture and different deployments may empower certain entities while other deployments may not. For example, in some cases, the Original Design Manufacturer (ODM), which is a company that designs and manufactures a product, may act as a TPA and may decide to remain in full control over the firmware update process of their products.

The terms ‘trust anchor’ and ‘trust anchor store’ are defined in [RFC6024]:

3. Requirements

The firmware update mechanism described in this specification was designed with the following requirements in mind:

3.1. Agnostic to how firmware images are distributed

Firmware images can be conveyed to devices in a variety of ways, including USB, UART, WiFi, BLE, low-power WAN technologies, etc. and use different protocols (e.g., CoAP, HTTP). The specified mechanism needs to be agnostic to the distribution of the firmware images and manifests.

3.2. Friendly to broadcast delivery

This architecture does not specify any specific broadcast protocol. However, given that broadcast may be desirable for some networks, updates must cause the least disruption possible both in metadata and payload transmission.

For an update to be broadcast friendly, it cannot rely on link layer, network layer, or transport layer security. In addition, the same message must be deliverable to many devices, both those to which it applies and those to which it does not, without a chance that the wrong device will accept the update. Considerations that apply to network broadcasts apply equally to the use of third-party content distribution networks for payload distribution.

3.3. Use state-of-the-art security mechanisms

End-to-end security between the author and the device, as shown in Section 5, is used to ensure that the device can verify firmware images and manifests produced by authorized authors.

The use of post-quantum secure signature mechanisms, such as hash-based signatures, should be explored. A migration to post-quantum secure signatures would require significant effort, therefore, mandatory-to-implement support for post-quantum secure signatures is a goal.

A mandatory-to-implement set of algorithms has to be defined offering a key length of 112-bit symmetric key or security or more, as outlined in Section 20 of RFC 7925 [RFC7925]. This corresponds to a 233 bit ECC key or a 2048 bit RSA key.

If the firmware image is to be encrypted, it must be done in such a way that every intended recipient can decrypt it. The information that is encrypted individually for each device must be an absolute minimum, for example AES Key Wrap [RFC5649], in order to maintain friendliness to Content Distribution Networks, bulk storage, and broadcast protocols.

3.4. Rollback attacks must be prevented

A device presented with an old, but valid manifest and firmware must not be tricked into installing such firmware since a vulnerability in the old firmware image may allow an attacker to gain control of the device.

3.5. High reliability

A power failure at any time must not cause a failure of the device. A failure to validate any part of an update must not cause a failure of the device. One way to achieve this functionality is to provide a minimum of two storage locations for firmware and one bootable location for firmware. An alternative approach is to use a 2nd stage bootloader with build-in full featured firmware update functionality such that it is possible to return to the update process after power down.

Note: This is an implementation requirement rather than a requirement on the manifest format.

3.6. Operate with a small bootloader

The bootloader must be minimal, containing only flash support, cryptographic primitives and optionally a recovery mechanism. The recovery mechanism is used in case the update process failed and may include support for firmware updates over serial, USB or even a limited version of wireless connectivity standard like a limited Bluetooth Smart. Such a recovery mechanism must provide security at least at the same level as the full featured firmware update functionalities.

The bootloader needs to verify the received manifest and to install the bootable firmware image. The bootloader should not require updating since a failed update poses a risk in reliability. If more functionality is required in the bootloader, it must use a two-stage bootloader, with the first stage comprising the functionality defined above.

All information necessary for a device to make a decision about the installation of a firmware update must fit into the available RAM of a constrained IoT device. This prevents flash write exhaustion.

Note: This is an implementation requirement.

3.7. Small Parsers

Since parsers are known sources of bugs they must be minimal. Additionally, it must be easy to parse only those fields that are required to validate at least one signature or MAC with minimal exposure.

3.8. Minimal impact on existing firmware formats

The design of the firmware update mechanism must not require changes to existing firmware formats.

3.9. Robust permissions

When a device obtains a monolithic firmware image from a single author without any additional approval steps then the authorization flow is relatively simple. There are, however, other cases where more complex policy decisions need to be made before updating a device.

In this architecture the authorization policy is separated from the underlying communication architecture. This is accomplished by separating the entities from their permissions. For example, an author may not have the authority to install a firmware image on a device in critical infrastructure without the authorization of a device operator. In this case, the device may be programmed to reject firmware updates unless they are signed both by the firmware author and by the device operator.

Alternatively, a device may trust precisely one entity, which does all permission management and coordination. This entity allows the device to offload complex permissions calculations for the device.

3.10. Operating modes

There are three broad classifications of update operating modes.

Client-initiated updates take the form of a firmware consumer on a device proactively checking (polling) for new firmware images.

Server-initiated updates are important to consider because timing of updates may need to be tightly controlled in some high- reliability environments. In this case the status tracker determines what devices qualify for a firmware update. Once those devices have been selected the firmware server distributes updates to the firmware consumers.

Note: This assumes that the status tracker is able to reach the device, which may require devices to keep reachability information at the status tracker up-to-date. This may also require keeping state at NATs and stateful packet filtering firewalls alive.

Hybrid updates are those that require an interaction between the firmware consumer and the status tracker. The status tracker pushes notifications of availability of an update to the firmware consumer, and it then downloads the image from a firmware server as soon as possible.

An alternative view to the operating modes is to consider the steps a device has to go through in the course of an update:

The notification step consists of the status tracker informing the firmware consumer that an update is available. This can be accomplished via polling (client-initiated), push notifications (server-initiated), or more complex mechanisms.

The pre-authorisation step involves verifying whether the entity signing the manifest is indeed authorized to perform an update. The firmware consumer must also determine whether it should fetch and process a firmware image, which is referenced in a manifest.

A dependency resolution phase is needed when more than one component can be updated or when a differential update is used. The necessary dependencies must be available prior to installation.

The download step is the process of acquiring a local copy of the firmware image. When the download is client-initiated, this means that the firmware consumer chooses when a download occurs and initiates the download process. When a download is server-initiated, this means that the status tracker tells the device when to download or that it initiates the transfer directly to the firmware consumer. For example, a download from an HTTP-based firmware server is client-initiated. Pushing a manifest and firmware image to the transfer to the Package resource of the LwM2M Firmware Update object [LwM2M] is server-initiated.

If the firmware consumer has downloaded a new firmware image and is ready to install it, it may need to wait for a trigger from the status tracker to initiate the installation, may trigger the update automatically, or may go through a more complex decision making process to determine the appropriate timing for an update (such as delaying the update process to a later time when end users are less impacted by the update process).

Installation is the act of processing the payload into a format that the IoT device can recognise and the bootloader is responsible for then booting from the newly installed firmware image.

Each of these steps may require different permissions.

4. Claims

Claims in the manifest offer a way to convey instructions to a device that impact the firmware update process. To have any value the manifest containing those claims must be authenticated and integrity protected. The credential used to must be directly or indirectly related to the trust anchor installed at the device by the Trust Provisioning Authority.

The baseline claims for all manifests are described in [I-D.ietf-suit-information-model]. For example, there are:

5. Communication Architecture

Figure 1 shows the communication architecture where a firmware image is created by an author, and uploaded to a firmware server. The firmware image/manifest is distributed to the device either in a push or pull manner using the firmware consumer residing on the device. The device operator keeps track of the process using the status tracker. This allows the device operator to know and control what devices have received an update and which of them are still pending an update.

              Firmware +  +----------+       Firmware + +-----------+
              Manifest    |          |-+     Manifest   |           |-+
               +--------->| Firmware | |<---------------|           | |
               |          | Server   | |                |  Author   | |
               |          |          | |                |           | |
               |          +----------+ |                +-----------+ |
               |            +----------+                  +-----------+
               |
               |
               |
              -+--                                  ------
         ----  |  ----                          ----      ----
       //      |      \\                      //              \\
      /        |        \                    /                  \
     /         |         \                  /                    \
    /          |          \                /                      \
   /           |           \              /                        \
  |            v            |            |                          |
  |     +------------+                                              |
  |     |  Firmware  |      |            |                          |
 |      |  Consumer  |       | Device    |       +--------+          |
 |      +------------+       | Management|       |        |          |
 |      |            |<------------------------->| Status |          |
 |      |   Device   |       |          |        | Tracker|          |
 |      +------------+       |          ||       |        |         |
  |                         |           ||       +--------+         |
  |                         |            |                          |
  |                         |             \                        /
   \                       /               \                      /
    \                     /                 \      Device        /
     \     Network       /                   \     Operator     /
      \   Operator      /                     \\              //
       \\             //                        ----      ----
         ----     ----                              ------
             -----

Figure 1: Architecture.

End-to-end security mechanisms are used to protect the firmware image and the manifest although Figure 2 does not show the manifest itself since it may be distributed independently.

                            +-----------+
+--------+                  |           |                   +--------+
|        |  Firmware Image  | Firmware  |   Firmware Image  |        |
| Device |<-----------------| Server    |<------------------| Author |
|        |                  |           |                   |        |
+--------+                  +-----------+                   +--------+
     ^                                                          *
     *                                                          *
     ************************************************************
                        End-to-End Security

Figure 2: End-to-End Security.

Whether the firmware image and the manifest is pushed to the device or fetched by the device is a deployment specific decision.

The following assumptions are made to allow the firmware consumer to verify the received firmware image and manifest before updating software:

There are different types of delivery modes, which are illustrated based on examples below.

There is an option for embedding a firmware image into a manifest. This is a useful approach for deployments where devices are not connected to the Internet and cannot contact a dedicated firmware server for the firmware download. It is also applicable when the firmware update happens via a USB stick or via Bluetooth Smart. Figure 3 shows this delivery mode graphically.

              /------------\                 /------------\
             /Manifest with \               /Manifest with \
             |attached      |               |attached      |
             \firmware image/               \firmware image/
              \------------/  +-----------+  \------------/
  +--------+                  |           |                 +--------+
  |        |<.................| Firmware  |<................|        |
  | Device |                  | Server    |                 | Author |
  |        |                  |           |                 |        |
  +--------+                  +-----------+                 +--------+

Figure 3: Manifest with attached firmware.

Figure 4 shows an option for remotely updating a device where the device fetches the firmware image from some file server. The manifest itself is delivered independently and provides information about the firmware image(s) to download.

                              /------------\
                             /              \
                             |   Manifest   |
                             \              /
  +--------+                  \------------/                +--------+
  |        |<..............................................>|        |
  | Device |                                             -- | Author |
  |        |<-                                         ---  |        |
  +--------+  --                                     ---    +--------+
                --                                 ---
                  ---                            ---
                     --       +-----------+    --
                       --     |           |  --
        /------------\   --   | Firmware  |<-    /------------\
       /              \    -- | Server    |     /              \
       |   Firmware   |       |           |     |   Firmware   |
       \              /       +-----------+     \              /
        \------------/                           \------------/

Figure 4: Independent retrieval of the firmware image.

This architecture does not mandate a specific delivery mode but a solution must support both types.

6. Manifest

In order for a device to apply an update, it has to make several decisions about the update:

The manifest encodes the information that devices need in order to make these decisions. It is a data structure that contains the following information:

The manifest information model is described in [I-D.ietf-suit-information-model].

7. Device Firmware Update Examples

Although these documents attempt to define a firmware update architecture that is applicable to both existing systems, as well as yet-to-be-conceived systems; it is still helpful to consider existing architectures.

7.1. Single CPU SoC

The simplest, and currently most common, architecture consists of a single MCU along with its own peripherals. These SoCs generally contain some amount of flash memory for code and fixed data, as well as RAM for working storage. These systems either have a single firmware image, or an immutable bootloader that runs a single image. A notable characteristic of these SoCs is that the primary code is generally execute in place (XIP). Combined with the non-relocatable nature of the code, firmware updates need to be done in place.

7.2. Single CPU with Secure - Normal Mode Partitioning

Another configuration consists of a similar architecture to the previous, with a single CPU. However, this CPU supports a security partitioning scheme that allows memory (in addition to other things) to be divided into secure and normal mode. There will generally be two images, one for secure mode, and one for normal mode. In this configuration, firmware upgrades will generally be done by the CPU in secure mode, which is able to write to both areas of the flash device. In addition, there are requirements to be able to update either image independently, as well as to update them together atomically, as specified in the associated manifests.

7.3. Dual CPU, shared memory

This configuration has two or more CPUs in a single SoC that share memory (flash and RAM). Generally, they will be a protection mechanism to prevent one CPU from accessing the other’s memory. Upgrades in this case will typically be done by one of the CPUs, and is similar to the single CPU with secure mode.

7.4. Dual CPU, other bus

This configuration has two or more CPUs, each having their own memory. There will be a communication channel between them, but it will be used as a peripheral, not via shared memory. In this case, each CPU will have to be responsible for its own firmware upgrade. It is likely that one of the CPUs will be considered a master, and will direct the other CPU to do the upgrade. This configuration is commonly used to offload specific work to other CPUs. Firmware dependencies are similar to the other solutions above, sometimes allowing only one image to be upgraded, other times requiring several to be upgraded atomically. Because the updates are happening on multiple CPUs, upgrading the two images atomically is challenging.

8. Example Flow

The following example message flow illustrates the interaction for distributing a firmware image to a device starting with an author uploading the new firmware to firmware server and creating a manifest. The firmware and manifest are stored on the same firmware server.

+--------+    +-----------------+      +------------+ +----------+
| Author |    | Firmware Server |      |FW Consuumer| |Bootloader|
+--------+    +-----------------+      +------------+ +----------+
  |                   |                     |                +
  | Create Firmware   |                     |                |
  |---------------    |                     |                |
  |              |    |                     |                |
  |<--------------    |                     |                |
  |                   |                     |                |
  | Upload Firmware   |                     |                |
  |------------------>|                     |                |
  |                   |                     |                |
  | Create Manifest   |                     |                |
  |----------------   |                     |                |
  |               |   |                     |                |
  |<---------------   |                     |                |
  |                   |                     |                |
  | Sign Manifest     |                     |                |
  |--------------     |                     |                |
  |             |     |                     |                |
  |<-------------     |                     |                |
  |                   |                     |                |
  | Upload Manifest   |                     |                |
  |------------------>|                     |                |
  |                   |                     |                |
  |                   |   Query Manifest    |                |
  |                   |<--------------------|                |
  |                   |                     |                |
  |                   |   Send Manifest     |                |
  |                   |-------------------->|                |
  |                   |                     | Validate       |
  |                   |                     | Manifest       |
  |                   |                     |---------+      |
  |                   |                     |         |      |
  |                   |                     |<--------+      |
  |                   |                     |                |
  |                   |  Request Firmware   |                |
  |                   |<--------------------|                |
  |                   |                     |                |
  |                   | Send Firmware       |                |
  |                   |-------------------->|                |
  |                   |                     | Verify         |
  |                   |                     | Firmware       |
  |                   |                     |--------------- |
  |                   |                     |              | |
  |                   |                     |<-------------- |
  |                   |                     |                |
  |                   |                     | Store          |
  |                   |                     | Firmware       |
  |                   |                     |--------------  |
  |                   |                     |             |  |
  |                   |                     |<-------------  |
  |                   |                     |                |
  |                   |                     |                |
  |                   |                     | Reboot         |
  |                   |                     |--------------->|
  |                   |                     |                |
  |                   |                     | Validate       |
  |                   |                     | Firmware       |
  |                   |                     | ---------------|
  |                   |                     | |              |
  |                   |                     | -------------->|
  |                   |                     |                |
  |                   |                     | Activate new   |
  |                   |                     | Firmware       |
  |                   |                     | ---------------|
  |                   |                     | |              |
  |                   |                     | -------------->|
  |                   |                     |                |
  |                   |                     | Boot new       |
  |                   |                     | Firmware       |
  |                   |                     | ---------------|
  |                   |                     | |              |
  |                   |                     | -------------->|
  |                   |                     |                |

Figure 5: Example Flow for a Firmware Upate.

9. IANA Considerations

This document does not require any actions by IANA.

10. Security Considerations

Firmware updates fix security vulnerabilities and are considered to be an important building block in securing IoT devices. Due to the importance of firmware updates for IoT devices the Internet Architecture Board (IAB) organized a ‘Workshop on Internet of Things (IoT) Software Update (IOTSU)’, which took place at Trinity College Dublin, Ireland on the 13th and 14th of June, 2016 to take a look at the big picture. A report about this workshop can be found at [RFC8240]. A standardized firmware manifest format providing end-to-end security from the author to the device will be specified in a separate document.

There are, however, many other considerations raised during the workshop. Many of them are outside the scope of standardization organizations since they fall into the realm of product engineering, regulatory frameworks, and business models. The following considerations are outside the scope of this document, namely

11. Mailing List Information

The discussion list for this document is located at the e-mail address suit@ietf.org. Information on the group and information on how to subscribe to the list is at https://www1.ietf.org/mailman/listinfo/suit

Archives of the list can be found at: https://www.ietf.org/mail-archive/web/suit/current/index.html

12. Acknowledgements

We would like to thank the following persons for their feedback:

We would also like to thank the WG chairs, Russ Housley, David Waltermire, Dave Thaler for their support and their reviews. Kathleen Moriarty was the responsible security area director when this work was started.

13. References

13.1. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC7925] Tschofenig, H. and T. Fossati, "Transport Layer Security (TLS) / Datagram Transport Layer Security (DTLS) Profiles for the Internet of Things", RFC 7925, DOI 10.17487/RFC7925, July 2016.

13.2. Informative References

[I-D.ietf-suit-information-model] Moran, B., Tschofenig, H. and H. Birkholz, "Firmware Updates for Internet of Things Devices - An Information Model for Manifests", Internet-Draft draft-ietf-suit-information-model-01, July 2018.
[LwM2M] OMA, ., "Lightweight Machine to Machine Technical Specification, Version 1.0.2", February 2018.
[RFC5649] Housley, R. and M. Dworkin, "Advanced Encryption Standard (AES) Key Wrap with Padding Algorithm", RFC 5649, DOI 10.17487/RFC5649, September 2009.
[RFC6024] Reddy, R. and C. Wallace, "Trust Anchor Management Requirements", RFC 6024, DOI 10.17487/RFC6024, October 2010.
[RFC8240] Tschofenig, H. and S. Farrell, "Report from the Internet of Things Software Update (IoTSU) Workshop 2016", RFC 8240, DOI 10.17487/RFC8240, September 2017.

Authors' Addresses

Brendan Moran Arm Limited EMail: Brendan.Moran@arm.com
Milosch Meriac Consultant EMail: milosch@meriac.com
Hannes Tschofenig Arm Limited EMail: hannes.tschofenig@gmx.net
David Brown Linaro EMail: david.brown@linaro.org