| Softwire Working Group | Y. Cui |
| Internet-Draft | Tsinghua University |
| Intended status: Standards Track | I. Farrer |
| Expires: April 26, 2019 | Deutsche Telekom AG |
| M. Boucadair | |
| Orange | |
| Q. Sun | |
| L. Sun | |
| Tsinghua University | |
| S. Zechlin | |
| Deutsche Telekom AG | |
| R. Asati | |
| Cisco Systems, Inc. | |
| October 23, 2018 |
YANG Modules for IPv4-in-IPv6 Address plus Port Softwires
draft-ietf-softwire-yang-08
This document defines YANG modules for the configuration and operation of IPv4-in-IPv6 softwire Border Relays and Customer Premises Equipment for the Lightweight 4over6, MAP-E, and MAP-T softwire mechanisms.
Please update these statements within this document with the RFC number to be assigned to this document:
Please update the "revision" date of the YANG module.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on April 26, 2019.
Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The IETF softwire working group has developed several IPv4-in-IPv6 softwire mechanisms to address various deployment contexts and constraints. As a companion to the architectural specification documents, this document focuses on the provisioning of address plus port (A+P) softwire functional elements: Border Routers (BRs) and Customer Premises Equipment (CEs, a.k.a., CPE). The softwire mechanisms covered in this document are Lightweight 4 over 6 [RFC7596], MAP-E [RFC7597], and MAP-T [RFC7599].
This document focuses on A+P mechanisms; the reader can refer to [I-D.ietf-softwire-dslite-yang] for a YANG module for DS-Lite [RFC6333].
This document defines YANG data modules [RFC7950] that can be used to configure and manage A+P softwire elements using the NETCONF protocol [RFC6241] for:
The reader should be familiar with the concepts and terms defined in [RFC7596], [RFC7597], [RFC7599], and the YANG data modelling language defined in [RFC7950].
The adopts the Network Management Datastore Architecture (NMDA) [RFC8342]. The meaning of the symbols in tree diagrams is defined in [RFC8340].
The document uses BR to refer to MAP BR [RFC7597] or Lightweight 4over6 BR [RFC7596].
For simplicity, "algorithm" is used to refer to "mapping algorithm" [RFC7597].
This document specifies the initial version of an IANA-maintained module to identify a collection of tunnel types assigned by IANA (Section 5). Furthermore, the document augments the Interface YANG module [RFC8343] with a new parameter which is meant to indicate the type of a given tunnel (Section 6). The tree structure of this extension is shown below:
module: ietf-interface-tunnel
augment /if:interfaces/if:interface:
+--rw tunnel-type? identityref
Moreover, the document defines the following two YANG data modules for the configuration and monitoring of softwire functional elements:
In addition, the following module is defined:
This approach has been taken so that the various modules can be easily extended to support additional softwire mechanisms, if required.
Within the BR and CE modules, the YANG "feature" statement is used to distinguish which of the different softwire mechanism(s) is relevant for a specific element's configuration. For each module, a choice statement 'ce-type' is included for either 'binding' or 'algorithm'. 'Binding' is used for configuring Lightweight 4over6, whereas 'algorithm' is used for configuring MAP-T or MAP-E.
In the 'algo-instances' container, a choice statement 'data-plane' is included to specify MAP-E (encapsulation) or MAP-T (translation). Table 1 shows how these choices are used to indicate the desired softwire mechanism:
| S46 Mechanism | ce-type? | data-plane? |
|---|---|---|
| Lightweight 4over6 | binding | n/a |
| MAP-E | algorithm | encapsulation |
| MAP-T | algorithm | translation |
NETCONF notifications are also included.
The softwire modules only aim to provide configuration relevant for softwires. In order to fully provision a CE element, the following may also be necessary:
As YANG modules for the above functions are already defined in other documents, their functionality is not duplicated here and they should be referred to, as needed. Appendix A.3 provides XML examples of how these modules can be used together.
The CE must already have minimal IPv6 configuration in place so it is reachable by the NETCONF client to obtain softwire configuration. If additional IPv6 specific configuration is necessary, the YANG modules defined in [RFC8344] and [RFC8349] may be used.
The CE module provides configuration and monitoring for all of the softwire mechanisms covered in this document (i.e., Lightweight 4over6, MAP-E, and MAP-T).
This module augments "ietf-interfaces", defined in [RFC8343] with an entry for the softwire. This entry can be referenced to configure IPv4 forwarding features for the element.
Figure 1 describes the tree structure of the softwire CE YANG module.
module: ietf-softwire-ce
augment /if:interfaces/if:interface:
+--rw softwire-payload-mtu? uint16
+--rw softwire-path-mru? uint16
+--rw (ce-type)?
+--:(binding) {binding-mode}?
| +--rw binding-ipv6info? union
| +--rw br-ipv6-addr inet:ipv6-address
+--:(algo) {map-e or map-t}?
+--rw algo-instances
+--rw algo-instance* [id]
+--rw id uint32
+--rw enable? boolean
+--rw algo-versioning
| +--rw version? uint64
| +--rw date? yang:date-and-time
+--rw name? string
+--rw (data-plane)?
| +--:(encapsulation) {map-e}?
| | +--rw br-ipv6-addr inet:ipv6-address
| +--:(translation) {map-t}?
| +--rw dmr-ipv6-prefix? inet:ipv6-prefix
+--rw ea-len uint8
+--rw rule-ipv6-prefix inet:ipv6-prefix
+--rw rule-ipv4-prefix inet:ipv4-prefix
+--rw forwarding boolean
augment /if:interfaces/if:interface/if:statistics:
+--ro sent-ipv4-packets?
| yang:zero-based-counter64
+--ro sent-ipv4-bytes?
| yang:zero-based-counter64
+--ro sent-ipv6-packets?
| yang:zero-based-counter64
+--ro sent-ipv6-bytes?
| yang:zero-based-counter64
+--ro rcvd-ipv4-packets?
| yang:zero-based-counter64
+--ro rcvd-ipv4-bytes?
| yang:zero-based-counter64
+--ro rcvd-ipv6-packets?
| yang:zero-based-counter64
+--ro rcvd-ipv6-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv4-packets?
| yang:zero-based-counter64
+--ro dropped-ipv4-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv6-packets?
| yang:zero-based-counter64
+--ro dropped-ipv6-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv4-fragments?
| yang:zero-based-counter64
+--ro dropped-ipv4-fragment-bytes?
| yang:zero-based-counter64
+--ro ipv6-fragments-reassembled?
| yang:zero-based-counter64
+--ro ipv6-fragments-bytes-reassembled?
| yang:zero-based-counter64
+--ro out-icmpv4-error-packets?
| yang:zero-based-counter64
+--ro out-icmpv4-error-bytes?
| yang:zero-based-counter64
+--ro out-icmpv6-error-packets?
| yang:zero-based-counter64
+--ro out-icmpv6-error-bytes?
yang:zero-based-counter64
notifications:
+---n softwire-ce-event {binding-mode}?
+--ro ce-binding-ipv6-addr-change inet:ipv6-address
Figure 1: Softwire CE YANG Tree Diagram
Additional information related to the operation of a CE element is provided below:
Further details relevant to binding softwire elements are:
Additional details relevant to some of the important algorithmic elements are provided below:
Additional information on the notification node is listed below:
The BR YANG module provides configuration and monitoring for all of the softwire mechanisms covered in this document (i.e., Lightweight 4over6, MAP-E, and MAP-T).
Figure 2 provides the tree structure of this module.
module: ietf-softwire-br
+--rw br-instances
+--rw (br-type)?
+--:(binding) {binding-mode}?
| +--rw binding
| +--rw bind-instances* [id]
| +--rw binding-table-versioning
| | +--rw version? uint64
| | +--rw date? yang:date-and-time
| +--rw id uint32
| +--rw name? string
| +--rw softwire-num-max uint32
| +--rw softwire-payload-mtu uint16
| +--rw softwire-path-mru uint16
| +--rw enable-hairpinning? boolean
| +--rw binding-table
| | +--rw binding-entry* [binding-ipv6info]
| | +--rw binding-ipv6info union
| | +--rw binding-ipv4-addr?
| | | inet:ipv4-address
| | +--rw port-set
| | | +--rw psid-offset? uint8
| | | +--rw psid-len uint8
| | | +--rw psid uint16
| | +--rw br-ipv6-addr?
| | inet:ipv6-address
| +--rw icmp-policy
| | +--rw icmpv4-errors
| | | +--rw allow-incoming-icmpv4? boolean
| | | +--rw icmpv4-rate? uint32
| | | +--rw generate-icmpv4-errors? boolean
| | +--rw icmpv6-errors
| | +--rw generate-icmpv6-errors? boolean
| | +--rw icmpv6-rate? uint32
| +--ro traffic-stat
| +--ro discontinuity-time yang:date-and-time
| +--ro sent-ipv4-packets?
| | yang:zero-based-counter64
| +--ro sent-ipv4-bytes?
| | yang:zero-based-counter64
| +--ro sent-ipv6-packets?
| | yang:zero-based-counter64
| +--ro sent-ipv6-bytes?
| | yang:zero-based-counter64
| +--ro rcvd-ipv4-packets?
| | yang:zero-based-counter64
| +--ro rcvd-ipv4-bytes?
| | yang:zero-based-counter64
| +--ro rcvd-ipv6-packets?
| | yang:zero-based-counter64
| +--ro rcvd-ipv6-bytes?
| | yang:zero-based-counter64
| +--ro dropped-ipv4-packets?
| | yang:zero-based-counter64
| +--ro dropped-ipv4-bytes?
| | yang:zero-based-counter64
| +--ro dropped-ipv6-packets?
| | yang:zero-based-counter64
| +--ro dropped-ipv6-bytes?
| | yang:zero-based-counter64
| +--ro dropped-ipv4-fragments?
| | yang:zero-based-counter64
| +--ro dropped-ipv4-fragment-bytes?
| | yang:zero-based-counter64
| +--ro ipv6-fragments-reassembled?
| | yang:zero-based-counter64
| +--ro ipv6-fragments-bytes-reassembled?
| | yang:zero-based-counter64
| +--ro out-icmpv4-error-packets?
| | yang:zero-based-counter64
| +--ro out-icmpv4-error-bytes?
| | yang:zero-based-counter64
| +--ro out-icmpv6-error-packets?
| | yang:zero-based-counter64
| +--ro out-icmpv6-error-bytes?
| | yang:zero-based-counter64
| +--ro dropped-icmpv4-packets?
| | yang:zero-based-counter64
| +--ro dropped-icmpv4-bytes?
| | yang:zero-based-counter64
| +--ro hairpin-ipv4-packets?
| | yang:zero-based-counter64
| +--ro hairpin-ipv4-bytes?
| | yang:zero-based-counter64
| +--ro active-softwire-num?
| uint32
+--:(algo) {map-e or map-t}?
+--rw algorithm
+--rw algo-instances* [id]
+--rw id uint32
+--rw enable? boolean
+--rw algo-versioning
| +--rw version? uint64
| +--rw date? yang:date-and-time
+--rw name? string
+--rw (data-plane)?
| +--:(encapsulation) {map-e}?
| | +--rw br-ipv6-addr inet:ipv6-address
| +--:(translation) {map-t}?
| +--rw dmr-ipv6-prefix? inet:ipv6-prefix
+--rw ea-len uint8
+--rw rule-ipv6-prefix inet:ipv6-prefix
+--rw rule-ipv4-prefix inet:ipv4-prefix
+--rw forwarding boolean
+--rw port-set
| +--rw psid-offset? uint8
| +--rw psid-len uint8
| +--rw psid uint16
+--ro traffic-stat
+--ro discontinuity-time yang:date-and-time
+--ro sent-ipv4-packets?
| yang:zero-based-counter64
+--ro sent-ipv4-bytes?
| yang:zero-based-counter64
+--ro sent-ipv6-packets?
| yang:zero-based-counter64
+--ro sent-ipv6-bytes?
| yang:zero-based-counter64
+--ro rcvd-ipv4-packets?
| yang:zero-based-counter64
+--ro rcvd-ipv4-bytes?
| yang:zero-based-counter64
+--ro rcvd-ipv6-packets?
| yang:zero-based-counter64
+--ro rcvd-ipv6-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv4-packets?
| yang:zero-based-counter64
+--ro dropped-ipv4-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv6-packets?
| yang:zero-based-counter64
+--ro dropped-ipv6-bytes?
| yang:zero-based-counter64
+--ro dropped-ipv4-fragments?
| yang:zero-based-counter64
+--ro dropped-ipv4-fragment-bytes?
| yang:zero-based-counter64
+--ro ipv6-fragments-reassembled?
| yang:zero-based-counter64
+--ro ipv6-fragments-bytes-reassembled?
| yang:zero-based-counter64
+--ro out-icmpv4-error-packets?
| yang:zero-based-counter64
+--ro out-icmpv4-error-bytes?
| yang:zero-based-counter64
+--ro out-icmpv6-error-packets?
| yang:zero-based-counter64
+--ro out-icmpv6-error-bytes?
yang:zero-based-counter64
notifications:
+---n softwire-binding-instance-event {binding-mode}?
| +--ro bind-id?
| | -> /br-instances/binding/bind-instances/id
| +--ro invalid-entry* leafref
| +--ro added-entry* inet:ipv6-address
| +--ro modified-entry* leafref
+---n softwire-algorithm-instance-event {map-e, map-t}?
+--ro algo-id
| -> /br-instances/algorithm/algo-instances/id
+--ro invalid-entry-id*
| -> /br-instances/algorithm/algo-instances/id
+--ro added-entry*
| -> /br-instances/algorithm/algo-instances/id
+--ro modified-entry*
-> /br-instances/algorithm/algo-instances/id
Figure 2: Softwire BR YANG Tree
The descriptions for leaves which are common with the CE module are provided in Section 3.2. Descriptions for additional elements are provided below:
Additional information on some of the important notification nodes is listed below:
<CODE BEGINS> file "iana-tunnel-type@2018-10-19.yang"
module iana-tunnel-type {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:iana-tunnel-type";
prefix iana-tunnel-type;
import iana-if-type {
prefix ift;
reference
"RFC 7224: IANA Interface Type YANG Module";
}
organization
"IANA";
contact
"Internet Assigned Numbers Authority
Postal: ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90094-2536
United States of America
Tel: +1 310 301 5800
<mailto:iana@iana.org>";
description
"This module contains a collection of YANG data types defined
by IANA and used for tunnel types.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
identity other {
base ift:tunnel;
description
"None of the following values.";
}
identity direct {
base ift:tunnel;
description
"No intermediate header.";
}
identity gre {
base ift:tunnel;
description
"GRE encapsulation.";
}
identity minimal {
base ift:tunnel;
description
"Minimal encapsulation.";
}
identity l2tp {
base ift:tunnel;
description
"L2TP encapsulation.";
}
identity pptp {
base ift:tunnel;
description
"PPTP encapsulation.";
}
identity l2f {
base ift:tunnel;
description
"L2F encapsulation.";
}
identity udp {
base ift:tunnel;
description
"UDP encapsulation.";
}
identity atmp {
base ift:tunnel;
description
"ATMP encapsulation.";
}
identity msdp {
base ift:tunnel;
description
"MSDP encapsulation.";
}
identity sixtofour {
base ift:tunnel;
description
"6to4 encapsulation.";
}
identity sixoverfour {
base ift:tunnel;
description
"6over4 encapsulation.";
}
identity isatap {
base ift:tunnel;
description
"ISATAP encapsulation.";
}
identity teredo {
base ift:tunnel;
description
"Teredo encapsulation.";
}
identity iphttps {
base ift:tunnel;
description
"IP over HTTPS.";
}
identity softwiremesh {
base ift:tunnel;
description
"softwire mesh tunnel.";
}
identity dslite {
base ift:tunnel;
description
"DS-Lite tunnel.";
}
// TBD: register this value.
identity aplusp {
base ift:tunnel;
description
"A+P encapsulation.";
}
}
<CODE ENDS>
The ietf-interface-tunnel module imports the modules defined in [RFC7224] and [RFC8343].
<CODE BEGINS> file "ietf-interface-tunnel@2018-10-19.yang"
module ietf-interface-tunnel {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-interface-tunnel";
prefix ietf-interface-tunnel;
import ietf-interfaces {
prefix if;
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
import iana-if-type {
prefix ift;
reference
"RFC 7224: IANA Interface Type YANG Module";
}
organization "IETF xxx Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/softwires/>
WG List: <mailto:softwire@ietf.org>
Editor: Mohamed Boucadair
<mailto:mohamed.boucadair@orange.com>";
description
"This module is a YANG module for associating a tunnel type with
tunnel interfaces.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
augment "/if:interfaces/if:interface" {
when 'derived-from(if:type, "ift:tunnel")';
description
"Augments Interface module with tunnel-specific parameters.
IANA interface types are maintained at this registry:
https://www.iana.org/assignments/ianaiftype-mib/ianaiftype-mib.
tunnel (131), -- Encapsulation interface";
leaf tunnel-type {
type identityref {
base ift:tunnel;
}
description
"Indicates the type of the tunnel. It corresponds
to the IANAtunnelType.
IANA tunnel types are maintained at this registry:
https://www.iana.org/assignments/ianaiftype-mib/ianaiftype-mib.";
}
}
}
<CODE ENDS>
This module imports the modules defined in [RFC6991], [RFC8343], and [RFC7224]. It also imports the 'ietf-softwire-common' module.
<CODE BEGINS>file "ietf-softwire-ce@2018-10-19.yang"
module ietf-softwire-ce {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-softwire-ce";
prefix "softwire-ce";
import ietf-inet-types {
prefix inet;
reference
"Section 4 of RFC 6991";
}
/*import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}*/
import ietf-interfaces {
prefix if;
reference
"RFC 8343: A YANG Data Model for Interface Management";
}
import ietf-softwire-common {
prefix softwire-common;
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
import iana-tunnel-type {
prefix iana-tunnel-type;
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
import ietf-interface-tunnel {
prefix ift;
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
organization
"IETF Softwire Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/softwire/>
WG List: <mailto:softwire@ietf.org>
Author: Qi Sun
<mailto:sunqi.ietf@gmail.com>
Author: Linhui Sun
<mailto:lh.sunlinh@gmail.com>
Author: Yong Cui
<mailto:yong@csnet1.cs.tsinghua.edu.cn>
Author: Ian Farrer
<mailto:ian.farrer@telekom.de>
Author: Sladjana Zoric
<mailto:sladjana.zoric@telekom.de>
Author: Mohamed Boucadair
<mailto:mohamed.boucadair@orange.com>
Author: Rajiv
<mailto:Asati rajiva@cisco.com>";
description
"This document defines a YANG data module for the configuration and
management of A+P Softwire Customer Premises Equipment (CEs). It
covers Lightweight 4over6, MAP-E, and MAP-T mechanisms.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
/*
* Features
*/
feature binding-mode {
description
"Binding is used for configuring the Lightweight 4over6 mechanism.
Binding based softwire mechanisms are IPv4-over-IPv6 tunnelling
transition mechanisms specifically intended for complete
independence between the IPv6 subnet prefix (and IPv6 address)
and IPv4 address, with or without IPv4 address sharing.
This is accomplished by maintaining state for each softwire
(per-subscriber state) in the central Border Relay (BR) and using
a hub-and-spoke forwarding architecture. In order to delegate the
NAPT function and achieve IPv4 address sharing, port-restricted
IPv4 addresses needs to be allocated to CEs.
This feature indicates that the instance functions as a binding
based softwire instance.";
reference
"RFC7596: Lightweight 4over6: An Extension to the Dual-Stack Lite
Architecture
RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)
RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
feature map-e {
description
"MAP-E is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP encapsulation. MAP-E
allows for a reduction of the amount of centralized state using
rules to express IPv4/IPv6 address mappings. This introduces an
algorithmic relationship between the IPv6 subnet and IPv4 address.
This feature indicates that the instance functions as a MAP-E.";
reference
"RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)";
}
feature map-t {
description
"MAP-T is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP translation. It leverages
a double stateless NAT64 based solution as well as the stateless
algorithmic address & transport layer port mapping algorithm
defined for MAP-E.
This feature indicates that the instance functions as a MAP-T
instance.";
reference
"RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
// Binding Entry
grouping binding-entry {
description
"The binding BR (Border Relay) maintains an address binding table
that contains the binding between the CE's IPv6 address,
the allocated IPv4 address and restricted port-set.";
leaf binding-ipv6info {
type union {
type inet:ipv6-address;
type inet:ipv6-prefix;
}
description
"The IPv6 information for a binding entry.
When the IPv6 prefix type is used,
the IPv6 source address of the CE is constructed
according to the description in RFC7596.
If the IPv6 address type is used, the CE can use
any valid /128 address from a prefix assigned to
the CE.";
reference
"Section 5.1 of RFC7596.";
}
leaf br-ipv6-addr {
type inet:ipv6-address;
mandatory true;
description
"The IPv6 address of the binding BR.";
}
}
// configuration and stateful parameters for softwire CE interface
augment "/if:interfaces/if:interface" {
when "derived-from(ift:tunnel-type, 'iana-tunnel-type:aplusp')";
description "Softwire CE interface configuration";
leaf softwire-payload-mtu {
type uint16;
units bytes;
description
"The payload IPv4 MTU for the softwire tunnel.";
}
leaf softwire-path-mru {
type uint16;
units bytes;
description
"The path MRU for the softwire (payload + encapsulation
overhead).";
}
choice ce-type {
description "Sets the softwire CE mechanism";
case binding {
if-feature binding-mode;
description "CE binding configuration";
uses binding-entry;
}
case algo {
if-feature "map-e or map-t";
description "CE algorithm configuration";
container algo-instances {
description
"Indicates that the instances supports the MAP-E and/or MAP-T
function. The instances advertise the MAP-E/MAP-T
feature through the capability exchange mechanism
when a NETCONF session is established.";
list algo-instances {
key "id";
description
"MAP forwarding rule instance for
MAP-E/MAP-T";
leaf id {
type uint32;
mandatory true;
description
"Algorithm Instance ID.
This identifier can be automatically assigned
or explicitly configured.";
}
uses softwire-common:algorithm-instance;
}
}
}
}
}
augment "/if:interfaces/if:interface/if:statistics" {
when "derived-from(../ift:tunnel-type, 'iana-tunnel-type:aplusp')";
description "Softwire CE interface statistics.";
uses softwire-common:traffic-stat;
}
/*
* Notifications
*/
notification softwire-ce-event {
if-feature binding-mode;
description "CE notification";
leaf ce-binding-ipv6-addr-change {
type inet:ipv6-address;
mandatory true;
description
"This notification is generated whenever the CE's binding IPv6
address changes for any reason.";
}
}
}
<CODE ENDS>
This module imports typedefs from [RFC6991]. It also imports the 'ietf-softwire-common' module.
<CODE BEGINS>file "ietf-softwire-br@2018-10-19.yang"
module ietf-softwire-br {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-softwire-br";
prefix "softwire-br";
import ietf-inet-types {
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}
import ietf-softwire-common {
prefix softwire-common;
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
organization
"IETF Softwire Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/softwire/>
WG List: <mailto:softwire@ietf.org>
Author: Qi Sun
<mailto:sunqi.ietf@gmail.com>
Author: Linhui Sun
<mailto:lh.sunlinh@gmail.com>
Author: Yong Cui
<mailto:yong@csnet1.cs.tsinghua.edu.cn>
Author: Ian Farrer
<mailto:ian.farrer@telekom.de>
Author: Sladjana Zoric
<mailto:sladjana.zoric@telekom.de>
Author: Mohamed Boucadair
<mailto:mohamed.boucadair@orange.com>
Author: Rajiv
<mailto:Asati rajiva@cisco.com>";
description
"This document defines a YANG data module for the configuration and
management of A+P Softwire Border Routers. It covers Lightweight
4over6, MAP-E, and MAP-T mechanisms.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
/*
* Groupings
*/
grouping port-set {
description
"Describes a set of layer 4 port numbers.
This may be a simple port range, or use the Port Set
Identifier (PSID) algorithm to represent a range of transport
layer ports which will be used by a NAPT.";
leaf psid-offset {
type uint8 {
range 0..16;
}
description
"The number of offset bits. In Lightweight 4over6,
the default value is 0 for assigning one contiguous
port range. In MAP-E/T, the default value is 6,
which means the system ports (0-1023) are excluded by
default and the assigned port ranges are distributed across the
entire port space, depending on either psid-len or the
number of contiguous ports.";
}
leaf psid-len {
type uint8 {
range 0..15;
}
mandatory true;
description
"The length of PSID, representing the sharing
ratio for an IPv4 address. This, along with ea-len, can
be used to calculate the number of contiguous ports per
port range";
}
leaf psid {
type uint16;
mandatory true;
description
"Port Set Identifier (PSID) value, which
identifies a set of ports algorithmically.";
}
}
grouping binding-entry {
description
"The binding BR maintains an address binding table that
contains the binding between the CE's IPv6 address,
the allocated IPv4 address and restricted port-set.";
leaf binding-ipv6info {
type union {
type inet:ipv6-address;
type inet:ipv6-prefix;
}
description
"The IPv6 information for a CE binding entry.
When the IPv6 prefix type is used,
the IPv6 source address of the CE is constructed
according to the description in RFC7596;
if the IPv6 address type is used, the CE can use
any valid /128 address from a prefix assigned to
the CE.";
reference
"RFC7596: Lightweight 4over6: An Extension to the Dual-Stack
Lite Architecture";
}
leaf binding-ipv4-addr {
type inet:ipv4-address;
description
"The IPv4 address assigned to the binding CE,
which is used as the IPv4 external address
for binding CE local NAPT44.";
}
container port-set {
description
"For Lightweight 4over6, the default value
for offset should be 0, to configure one contiguous
port range.";
uses port-set {
refine "psid-offset" {
default "0";
}
}
}
leaf br-ipv6-addr {
type inet:ipv6-address;
description
"The IPv6 address for binding BR.";
}
}
/*
* Features
*/
feature binding-mode {
description
"Binding is used for configuring the Lightweight 4over6 mechanism.
Binding based softwire mechanisms are IPv4-over-IPv6 tunnelling
transition mechanisms specifically intended for complete
independence between the IPv6 subnet prefix (and IPv6 address) and
IPv4 address, with or without IPv4 address sharing.
This is accomplished by maintaining state for each softwire
(per-subscriber state) in the central Border Relay (BR) and using
a hub-and-spoke forwarding architecture. In order to delegate the
NAPT function and achieve IPv4 address sharing, port-restricted
IPv4 addresses needs to be allocated to CEs.
This feature indicates that the instance functions as a binding
based softwire instance.";
reference
"RFC7596: Lightweight 4over6: An Extension to the Dual-Stack Lite
Architecture
RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)
RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
feature map-e {
description
"MAP-E is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP encapsulation. MAP-E
allows for a reduction of the amount of centralized state using
rules to express IPv4/IPv6 address mappings. This introduces an
algorithmic relationship between the IPv6 subnet and IPv4 address.
This feature indicates that the instance functions as a MAP-E.";
reference
"RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)";
}
feature map-t {
description
"MAP-T is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP translation. It leverages
a double stateless NAT64 based solution as well as the stateless
algorithmic address & transport layer port mapping algorithm
defined for MAP-E.
This feature indicates that the instance functions as a MAP-T instance.";
reference
"RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
container br-instances {
description
"BR Instances";
choice br-type {
description
"Select binding or algorithmic BR functionality.";
case binding {
if-feature binding-mode;
container binding {
description
"binding mechanism (binding table) configuration.";
list bind-instances {
key "id";
description
"A set of binding BRs to be configured.";
leaf id {
type uint32;
mandatory true;
description
"A binding instance identifier.
This identifier can be automatically assigned
or explicitly configured.";
}
container binding-table-versioning {
description "binding table's version";
leaf version{
type uint64;
description "Incremental version number of the binding
table";
}
leaf date {
type yang:date-and-time;
description
"Timestamp of the binding table";
reference
"RFC7422: Deterministic Address Mapping to Reduce Logging in
Carrier-Grade NAT Deployments";
}
}
leaf name {
type string;
description
"The name for the binding BR. It is used to uniquely
distinguish a binding instance by its name.";
}
leaf softwire-num-max {
type uint32;
mandatory true;
description
"The maximum number of softwires that can be created on
the binding BR.";
}
leaf softwire-payload-mtu {
type uint16;
units bytes;
mandatory true;
description
"The payload IPv4 MTU for binding softwire.";
}
leaf softwire-path-mru {
type uint16;
units bytes;
mandatory true;
description
"The path MRU for binding softwire.";
}
leaf enable-hairpinning {
type boolean;
default true;
description
"Enables/disables support for locally forwarding
(hairpinning) traffic between two CEs.";
reference
"RFC7596 Section 6.2";
}
container binding-table {
description "binding table";
list binding-entry {
key "binding-ipv6info";
description "binding entry";
uses binding-entry;
}
}
container icmp-policy {
description
"The binding BR can be configured to process or drop
incoming ICMP messages, and to generate outgoing ICMP
error messages.";
container icmpv4-errors {
description
"ICMPv4 error processing configuration";
leaf allow-incoming-icmpv4 {
type boolean;
default true;
description
"Enables the processing of incoming ICMPv4
packets.";
reference
"RFC7596: Lightweight 4over6: An Extension to the
Dual-Stack Lite Architecture";
}
leaf icmpv4-rate {
type uint32;
description
"Rate limit threshold in messages per-second
for processing incoming ICMPv4 errors messages";
}
leaf generate-icmpv4-errors {
type boolean;
default true;
description
"Enables the generation of outgoing ICMPv4 error
messages on receipt of an inbound IPv4 packet with
no matching binding table entry.";
reference
"Seciton 5.2 of RFC7596.";
}
}
container icmpv6-errors {
description
"ICMPv6 error processing configuration";
leaf generate-icmpv6-errors {
type boolean;
default true;
description
"Enables the generation of ICMPv6 error messages if
no matching binding table entry is found for a
received packet.";
reference
"Section 6.2 of RFC7596.";
}
leaf icmpv6-rate {
type uint32;
description
"Rate limit threshold in messages per-second
for sending ICMPv6 errors messages";
reference
"Section 9 of RFC7596.";
}
}
}
container traffic-stat {
config false;
description
"Traffic statistics information for the BR.";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time of the most recent occasion on which the BR
instance suffered a discontinuity. This must be
initialized when the BR instance is configured
or rebooted.";
}
uses softwire-common:traffic-stat;
leaf dropped-icmpv4-packets {
type yang:zero-based-counter64;
description
"ICMPv4 packets that are dropped as a result
of the ICMP policy. Typically, this can be any
incoming ICMPv4 packets if ICMPv4 processing is
disabled or incoming ICMPv4 packets that exceed
the ICMPv4 rate-limit threshold.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf dropped-icmpv4-bytes {
type yang:zero-based-counter64;
description
"ICMPv4 messages, in bytes, that are dropped as
a result of the ICMP policy. Typically, it
can be any incoming ICMPv4 packets if ICMPv4
processing is disabled or incoming ICMPv4
packets that exceed the ICMPv4 rate-limit
threshold.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf hairpin-ipv4-packets {
type yang:zero-based-counter64;
description
"IPv4 packets locally routed between two CEs
(hairpinned).
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf hairpin-ipv4-bytes {
type yang:zero-based-counter64;
description
"IPv4 bytes locally routed between two CEs
(hairpinned).
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf active-softwire-num {
type uint32;
config false;
description
"The number of currently active softwires on the
binding instance.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
}
}
}
}
case algo {
if-feature "map-e or map-t";
container algorithm {
description
" A set of parameters used for MAP-E/MAP-T.";
list algo-instances {
key "id";
description "Instances of algorithm";
leaf id {
type uint32;
mandatory true;
description
"Identifier of the algorithm instance.
This identifier can be automatically assigned
or explicitly configured. ";
}
uses softwire-common:algorithm-instance;
container port-set {
description "Indicates a set of ports.";
uses port-set;
}
container traffic-stat {
config false;
description
"Traffic statistics information for the BR.";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time of the most recent occasion on which the BR
instance suffered a discontinuity. This must be reset
to the current date-and-time when the BR instance
is configured or rebooted.";
}
uses softwire-common:traffic-stat;
}
}
}
}
}
}
/*
* Notifications
*/
notification softwire-binding-instance-event {
if-feature binding-mode;
description
"Notifications for binding instance when an entry is
added, modified, or is not valid anymore.";
leaf bind-id {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances/id";
}
description "The ID of the binding-instance that
generated the notification.";
}
leaf-list invalid-entry {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances[id=current()/../bind-id]/"
+ "binding-table/binding-entry/binding-ipv6info";
}
description
"Notify the client that a specific binding entry has
expired or is invalid. The binding-ipv6info identifies an entry.";
}
leaf-list added-entry {
type inet:ipv6-address;
description
"Notify the client that a binding entry has been added.
The ipv6 address of that entry is the index. The client
gets other information from the binding BR about the entry
indexed by that ipv6 address.";
}
leaf-list modified-entry {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances[id=current()/../bind-id]/"
+ "binding-table/binding-entry/binding-ipv6info";
}
description "The ID of the the binding-table entry that
has been modified.";
}
}
notification softwire-algorithm-instance-event {
if-feature "map-e or map-t";
description
"Notifications for algorithm instance when an entry is
added, modified, or is not valid anymore.";
leaf algo-id {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
mandatory true;
description "algorithmic instance event.";
}
leaf-list invalid-entry-id {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Invalid entry event.";
}
leaf-list added-entry {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Added entry.";
}
leaf-list modified-entry {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Modified entry.";
}
}
}
<CODE ENDS>
This module imports typedefs from [RFC6991].
The following YANG module contains definitions that are used by both the softwire CE and softwire BR YANG modules.
<CODE BEGINS>file "ietf-softwire-common@2018-10-19.yang"
module ietf-softwire-common {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-softwire-common";
prefix "softwire-common";
import ietf-inet-types {
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}
organization
"IETF Softwire Working Group";
contact
"WG Web: <https://datatracker.ietf.org/wg/softwire/>
WG List: <mailto:softwire@ietf.org>
Author: Qi Sun
<mailto:sunqi.ietf@gmail.com>
Author: Linhui Sun
<mailto:lh.sunlinh@gmail.com>
Author: Yong Cui
<mailto:yong@csnet1.cs.tsinghua.edu.cn>
Author: Ian Farrer
<mailto:ian.farrer@telekom.de>
Author: Sladjana Zoric
<mailto:sladjana.zoric@telekom.de>
Author: Mohamed Boucadair
<mailto:mohamed.boucadair@orange.com>
Author: Rajiv
<mailto:Asati rajiva@cisco.com>";
description
"This document defines a YANG data module defining types
common to all A+P modules.
Copyright (c) 2018 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
feature map-e {
description
"MAP-E is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP encapsulation. MAP-E
allows for a reduction of the amount of centralized state using
rules to express IPv4/IPv6 address mappings. This introduces an
algorithmic relationship between the IPv6 subnet and IPv4 address.
This feature indicates that the instance functions as a MAP-E.";
reference
"RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)";
}
feature map-t {
description
"MAP-T is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP translation. It leverages
a double stateless NAT64 based solution as well as the stateless
algorithmic address & transport layer port mapping algorithm
defined for MAP-E.
This feature indicates that the instance functions as a MAP-T instance.";
reference
"RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
/*
* Groupings
*/
grouping algorithm-instance {
description
"A collection of parameters that is used fro MAP-E/MAP-T.";
leaf enable {
type boolean;
description
"Enable/disable an individual MAP-E or MAP-T rule.";
}
container algo-versioning {
description "algorithm's version";
leaf version {
type uint64;
description "Incremental version number for the algorithm";
}
leaf date {
type yang:date-and-time;
description "Timestamp when the algorithm instance was activated.";
reference
"RFC7422: Deterministic Address Mapping to Reduce Logging in
Carrier-Grade NAT Deployments";
}
}
leaf name {
type string;
description "The name for the instance.";
}
choice data-plane {
description "Selects MAP-E (encapsulation) or MAP-T
(translation)";
case encapsulation {
if-feature map-e;
description "encapsulation for MAP-E";
leaf br-ipv6-addr {
type inet:ipv6-address;
mandatory true;
description
"The IPv6 address of the MAP-E BR.";
}
}
case translation {
if-feature map-t;
description "translation for MAP-T";
leaf dmr-ipv6-prefix {
type inet:ipv6-prefix;
description
"The IPv6 prefix of the MAP-T BR.";
}
}
}
leaf ea-len {
type uint8;
mandatory true;
description
"Embedded Address (EA) bits are the IPv4 EA-bits in the IPv6
address identifying an IPv4 prefix/address (or part thereof) or
a shared IPv4 address (or part thereof) and a port-set
identifier. The length of the EA-bits is defined as part of
a MAP rule for a MAP domain.";
}
leaf rule-ipv6-prefix {
type inet:ipv6-prefix;
mandatory true;
description
"The Rule IPv6 prefix defined in the mapping rule.";
}
leaf rule-ipv4-prefix {
type inet:ipv4-prefix;
mandatory true;
description
"The Rule IPv4 prefix defined in the mapping rule.";
}
leaf forwarding {
type boolean;
mandatory true;
description
"This parameter specifies whether the rule may be used for
forwarding (FMR). If set, this rule is used as an FMR;
if not set, this rule is a Basic Mapping Rule (BMR) only
and must not be used for forwarding.";
}
}
grouping traffic-stat {
description "Traffic statistics";
leaf sent-ipv4-packets {
type yang:zero-based-counter64;
description "Number of decapsulated and forwarded IPv4 packets.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf sent-ipv4-bytes {
type yang:zero-based-counter64;
description "Decapsulated/translated IPv4 traffic sent, in bytes
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf sent-ipv6-packets {
type yang:zero-based-counter64;
description "Number of encapsulated IPv6 packets sent.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf sent-ipv6-bytes {
type yang:zero-based-counter64;
description "Encapsulated IPv6 traffic sent, in bytes
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf rcvd-ipv4-packets {
type yang:zero-based-counter64;
description "Number of incoming IPv4 packets at the
Internet-facing interface.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf rcvd-ipv4-bytes {
type yang:zero-based-counter64;
description "IPv4 traffic received for processing, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf rcvd-ipv6-packets {
type yang:zero-based-counter64;
description "Number of IPv4-in-IPv6 packets received.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf rcvd-ipv6-bytes {
type yang:zero-based-counter64;
description "IPv4-in-IPv6 traffic received, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv4-packets {
type yang:zero-based-counter64;
description "Number of IPv4 packets dropped at the
Internet-facing interface.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv4-bytes {
type yang:zero-based-counter64;
description "IPv4 traffic dropped at the Internet-facing
interface, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv6-packets {
type yang:zero-based-counter64;
description "Number of IPv4-in-IPv6 packets dropped.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv6-bytes {
type yang:zero-based-counter64;
description "IPv4-in-IPv6 traffic dropped, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv4-fragments {
type yang:zero-based-counter64;
description "Number of fragmented IPv4 packets dropped.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf dropped-ipv4-fragment-bytes {
type yang:zero-based-counter64;
description "Fragmented IPv4 traffic dropped, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf ipv6-fragments-reassembled {
type yang:zero-based-counter64;
description "Number of IPv6 fragments successfully reassembled.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf ipv6-fragments-bytes-reassembled {
type yang:zero-based-counter64;
description "IPv6 fragments successfully reassembled, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf out-icmpv4-error-packets {
type yang:zero-based-counter64;
description "Internally generated ICMPv4 error packets.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf out-icmpv4-error-bytes {
type yang:zero-based-counter64;
description "Internally generated ICMPv4 error messages, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf out-icmpv6-error-packets {
type yang:zero-based-counter64;
description "Internally generated ICMPv6 error packets.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
leaf out-icmpv6-error-bytes {
type yang:zero-based-counter64;
description "Internally generated ICMPv6 error messages, in bytes.
Discontinuities in the value of this counter can occur
at re-initialization of the management system, and at
other times as indicated by the value of
'discontinuity-time'.";
}
}
}
<CODE ENDS>
The YANG modules defined in this document is designed to be accessed via network management protocols such as NETCONF [RFC6241] or RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC8446].
The NETCONF access control model [RFC8341] provides the means to restrict access for particular NETCONF or RESTCONF users to a preconfigured subset of all available NETCONF or RESTCONF protocol operations and content.
All data nodes defined in the YANG modules which can be created, modified, and deleted (i.e., config true, which is the default) are considered sensitive. Write operations (e.g., edit-config) applied to these data nodes without proper protection can negatively affect network operations.
This document requests IANA to assign a new tunnel type under "tunnelType" sub-registry (under "ifType definitions" registry):
URI: urn:ietf:params:xml:ns:yang:ietf-interface-tunnel
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:iana-tunnel-type
Registrant Contact: IANA.
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:softwire-ce
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:softwire-br
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
URI: urn:ietf:params:xml:ns:yang:softwire-common
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.
This document requests IANA to register the following URIs in the "IETF XML Registry" [RFC3688]:
name: ietf-interface-tunnel
namespace: urn:ietf:params:xml:ns:yang:ietf-interface-tunnel
prefix: ietf-interface-tunnel
reference: RFC XXXX
name: iana-tunnel-type
namespace: urn:ietf:params:xml:ns:yang:iana-tunnel-type
prefix: iana-tunnel-type
reference: RFC XXXX
name: ietf-softwire-ce
namespace: urn:ietf:params:xml:ns:yang:softwire-ce
prefix: softwire-ce
reference: RFC XXXX
name: ietf-softwire-br
namespace: urn:ietf:params:xml:ns:yang:softwire-br
prefix: softwire-br
reference: RFC XXXX
name: ietf-softwire-common
namespace: urn:ietf:params:xml:ns:yang:softwire-common
prefix: softwire-common
reference: RFC XXXX
This document requests that IANA registers the following YANG modules in the "YANG Module Names" registry [RFC6020]:
This document defines the initial version of the IANA-maintained iana-tunnel-type YANG module. IANA is requested to add this note:
When an tunnel type is added to the "tunnelType" registry, a new "identity" statement must be added to the iana-tunnel-type YANG module. The name of the "identity" is the same as the corresponding enumeration in the IANAifType-MIB. The following substatements to the "identity" statement should be defined:
Unassigned or reserved values are not present in the module.
When the iana-tunnel-type YANG module is updated, a new "revision" statement must be added in front of the existing revision statements.
IANA is requested to add this note to "tunnelType" registry:
The authors would like to thank Lishan Li, Bert Wijnen, Giles Heron, Ole Troan, Andy Wingo and Leo Tietz for their contributions to this work.
Thanks to Sheng Jiang for the review.
Special thanks to Tom Petch for the detailed review and suggestions.
The following individuals contributed to this document:
Hao Wang
Tsinghua University
Beijing 100084
P.R.China
Phone: +86-10-6278-5822
Email: wangh13@mails.tsinghua.edu.cn
The following sections provide examples of how the softwire YANG modules can be used for configuring softwire elements.
The lwAFTR maintains an address binding table which contains the following 3-tuples:
The entry has two functions: the IPv6 encapsulation of inbound IPv4 packets destined to the lwB4 and the validation of outbound IPv4-in-IPv6 packets received from the lwB4 for de-capsulation.
Consider an example for the following lw4o6 binding table entry:
<br-instances>
<binding>
<bind-instances>
<id>1</id>
<binding-table>
<binding-entry>
<binding-ipv6info>2001:db8::1</binding-ipv6info>
<binding-ipv4-addr>192.0.2.1</binding-ipv4-addr>
<port-set>
<psid>52</psid>
<psid-len>8</psid-len>
</port-set>
<br-ipv6-addr>2001:db8:1::2</br-ipv6-addr>
</binding-entry>
</binding-table>
<softwire-num-max>1024</softwire-num-max>
<softwire-path-mru>1540</softwire-path-mru>
<softwire-payload-mtu>1500</softwire-payload-mtu>
</bind-instances>
</binding>
</br-instances>
Figure 3: lw4o6 Binding-Table Configuration XML
A MAP-E BR is configured with forward mapping rules for the CEs it is serving. In this example (taken from [RFC7597], Appendix A, Example 2), the following parameters are required:
The mapping rule has two functions: identifying the destination CE IPv6 address for encapsulating inbound IPv4 packets and the validation of outbound IPv4-in-IPv6 packets received from the CE for de-capsulation.
The transport type for the data plane also needs to be configured for encapsulation to enable MAP-E and forwarding needs to be enabled.
Consider an example for the following MAP-E Forwarding Mapping Rule:
Figure 4 provides the example MAP-E BR configuration xml.
<br-instances>
<algorithm>
<algo-instances>
<id>1234</id>
<encapsulation>
<br-ipv6-addr>2001:db8:ffff::1</br-ipv6-addr>
</encapsulation>
<ea-len>16</ea-len>
<rule-ipv4-prefix>192.0.2.0/24</rule-ipv4-prefix>
<rule-ipv6-prefix>2001:db8::/40</rule-ipv6-prefix>
<forwarding>true</forwarding>
<port-set>
<psid-offset>6</psid-offset>
<psid-len>8</psid-len>
</port-set>
</algo-instances>
</algorithm>
</br-instances>
Figure 4: MAP-E FMR Configuration XML
This section provides XML examples for configuring a lw4o6 CE. Examples for routing and NAT44 are also provided for convienience.
Consider an example for the following lw4o6 CE configuration:
<config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<interfaces xmlns="urn:ietf:params:xml:ns:yang:ietf-interfaces">
<interface>
<name>lw4o6-wan</name>
<tunnel-type
xmlns:iana="urn:ietf:params:xml:ns:yang:iana-tunnel-type">
iana-tunnel-type:aplusp
</tunnel-type>
<br-ipv6-addr
xmlns="urn:ietf:params:xml:ns:yang:ietf-softwire-ce">
2001:db8:1::2
</br-ipv6-addr>
<binding-ipv6info
xmlns="urn:ietf:params:xml:ns:yang:ietf-softwire-ce">
2001:db8::1
</binding-ipv6info>
</interface>
</interfaces>
</config>
Figure 5: lw4o6 CE Configuration XML
In the example depicted in Figure 5, the interface name is defined for the softwire tunnel. This name is then referenced by the routing configuration for the IPv4 route. Figure 6 provides an example configuration for the CE's IPv4 routing, using the YANG module described in [RFC8349].
<config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<routing xmlns="urn:ietf:params:xml:ns:yang:ietf-routing">
<control-plane-protocols>
<control-plane-protocol>
<type>static</type>
<name>v4</name>
<static-routes>
<ipv4
xmlns="urn:ietf:params:xml:ns:yang:ietf-ipv4-unicast-routing">
<route>
<destination-prefix>0.0.0.0/0</destination-prefix>
<next-hop>
<outgoing-interface>lw4o6-wan</outgoing-interface>
</next-hop>
</route>
</ipv4>
</static-routes>
</control-plane-protocol>
</control-plane-protocols>
</routing>
</config>
Figure 6: lw4o6 CE Routing Configuration XML
Figure 7 provides an example configuration for the CE's NAPT44 function, using the YANG module described in [I-D.ietf-opsawg-nat-yang].
<config xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
<nat xmlns="urn:ietf:params:xml:ns:yang:ietf-nat">
<instances>
<instance>
<id>1</id>
<policy>
<policy-id>1</policy-id>
<external-ip-address-pool>
<pool-id>1</pool-id>
<external-ip-pool>192.0.2.1</external-ip-pool>
</external-ip-address-pool>
<port-set-restrict>
<port-set-algo>
<psid-offset>6</psid-offset>
<psid-len>8</psid-len>
<psid>52</psid>
</port-set-algo>
</port-set-restrict>
<notify-pool-usage>
<pool-id>1</pool-id>
<high-threshold>80</high-threshold>
</notify-pool-usage>
</policy>
<mapping-limits>
<limit-per-protocol>
<protocol-id>1</protocol-id>
<limit>8</limit>
</limit-per-protocol>
<limit-per-protocol>
<protocol-id>6</protocol-id>
<limit>32</limit>
</limit-per-protocol>
<limit-per-protocol>
<protocol-id>17</protocol-id>
<limit>16</limit>
</limit-per-protocol>
</mapping-limits>
<mapping-table>
<mapping-entry>
<index>1</index>
<external-src-address>192.0.2.1/32</external-src-address>
<internal-src-address>192.168.1.0/24</internal-src-address>
<transport-protocol>6</transport-protocol>
</mapping-entry>
<mapping-entry>
<index>2</index>
<external-src-address>192.0.2.1/32</external-src-address>
<internal-src-address>192.168.1.0/24</internal-src-address>
<transport-protocol>17</transport-protocol>
</mapping-entry>
<mapping-entry>
<index>3</index>
<external-src-address>192.0.2.1/32</external-src-address>
<internal-src-address>192.168.1.0/24</internal-src-address>
<transport-protocol>1</transport-protocol>
</mapping-entry>
</mapping-table>
</instance>
</instances>
</nat>
</config>
Figure 7: lw4o6 NAT Configuration XML