Draft Party MIB for SNMPv2 Jan 93 Party MIB for version 2 of the Simple Network Management Protocol (SNMPv2) Tue Jan 26 15:33:46 1993 | Keith McCloghrie Hughes LAN Systems, Inc. kzm@hls.com James R. Davin Bellcore jrd@thumper.bellcore.com James M. Galvin Trusted Information Systems, Inc. galvin@tis.com Status of this Memo This document is an Internet Draft. Internet Drafts are working documents of the Internet Engineering Task Force (IETF), its Areas, and its Working Groups. Note that other groups may also distribute working documents as Internet Drafts. Internet Drafts are valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet Drafts as reference material or to cite them other than as a "work in progress". Expires July 26, 1993 [Page 1] Draft Party MIB for SNMPv2 Jan 93 1. Introduction A network management system contains: several (potentially many) nodes, each with a processing entity, termed an agent, which has access to management instrumentation; at least one management station; and, a management protocol, used to convey management information between the agents and management stations. Operations of the protocol are carried out under an administrative framework which defines both authentication and authorization policies. Network management stations execute management applications which monitor and control network elements. Network elements are devices such as hosts, routers, terminal servers, etc., which are monitored and controlled through access to their management information. Management information is viewed as a collection of managed objects, residing in a virtual information store, termed the Management Information Base (MIB). Collections of related objects are defined in MIB modules. These modules are written using a subset of OSI's Abstract Syntax Notation One (ASN.1) [1], termed the Structure of Management Information (SMI) [2]. The Administrative Model for SNMPv2 document [3] defines the properties associated with SNMPv2 parties, SNMPv2 contexts, and access control policies. It is the purpose of this document, the Party MIB for SNMPv2, to define managed objects which correspond to these properties. 1.1. A Note on Terminology For the purpose of exposition, the original Internet-standard Network Management Framework, as described in RFCs 1155, 1157, and 1212, is termed the SNMP version 1 framework (SNMPv1). The current framework is termed the SNMP version 2 framework (SNMPv2). Expires July 26, 1993 [Page 2] Draft Party MIB for SNMPv2 Jan 93 2. Definitions SNMPv2-PARTY-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, snmpModules, UInteger32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, TruthValue FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; partyMIB MODULE-IDENTITY LAST-UPDATED "9301263233Z" | ORGANIZATION "IETF SNMP Security Working Group" CONTACT-INFO " Keith McCloghrie Postal: Hughes LAN Systems Mountain View, CA 94043 US Tel: +1 415 966 7934 Fax: +1 415 960 3738 E-mail: kzm@hls.com" DESCRIPTION "The MIB module describing SNMPv2 parties." ::= { snmpModules 3 } Expires July 26, 1993 [Page 3] Draft Party MIB for SNMPv2 Jan 93 -- textual conventions Party ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a SNMPv2 party identifier. Note that agents may impose implementation limitations on the length of OIDs used to identify Parties. As such, management stations creating new parties should be aware that using an excessively long OID may result in the agent refusing to perform the set operation and instead returning the appropriate error response, e.g., noCreation." SYNTAX OBJECT IDENTIFIER TAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a transport service address. For snmpUDPDomain, a TAddress is 6 octets long, the initial 4 octets containing the IP-address in network-byte order and the last 2 containing the UDP port in network-byte order. Consult [5] for further information on snmpUDPDomain." SYNTAX OCTET STRING Expires July 26, 1993 [Page 4] Draft Party MIB for SNMPv2 Jan 93 Clock ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A party's authentication clock - a non-negative integer which is incremented as specified/allowed by the party's Authentication Protocol. For noAuth, a party's authentication clock is unused and its value is undefined. For v2md5AuthProtocol, a party's authentication clock is a relative clock with 1-second granularity." SYNTAX UInteger32 Context ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Denotes a SNMPv2 context identifier. Note that agents may impose implementation limitations on the length of OIDs used to identify Parties. As such, management stations creating new parties should be aware that using an excessively long OID may result in the agent refusing to perform the set operation and instead returning the appropriate error response, e.g., noCreation." SYNTAX OBJECT IDENTIFIER Expires July 26, 1993 [Page 5] Draft Party MIB for SNMPv2 Jan 93 StorageType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is nonVolatile(3) is backed up by stable storage. A row which is permanent(4) cannot be changed nor deleted." SYNTAX INTEGER { other(1), -- eh? volatile(2), -- e.g., in RAM nonVolatile(3), -- e.g., in NVRAM permanent(4) -- e.g., in ROM } Expires July 26, 1993 [Page 6] Draft Party MIB for SNMPv2 Jan 93 -- administrative assignments partyAdmin OBJECT IDENTIFIER ::= { partyMIB 1 } -- definitions of security protocols partyProtocols OBJECT IDENTIFIER ::= { partyAdmin 1 } -- the protocol without authentication noAuth OBJECT IDENTIFIER ::= { partyProtocols 1 } -- the protocol without privacy noPriv OBJECT IDENTIFIER ::= { partyProtocols 2 } -- the DES Privacy Protocol [4] desPrivProtocol OBJECT IDENTIFIER ::= { partyProtocols 3 } -- the MD5 Authentication Protocol [4] v2md5AuthProtocol OBJECT IDENTIFIER ::= { partyProtocols 4 } -- definitions of temporal domains temporalDomains OBJECT IDENTIFIER ::= { partyAdmin 2 } -- this temporal domain refers to management information -- at the current time currentTime OBJECT IDENTIFIER ::= { temporalDomains 1 } -- this temporal domain refers to management information -- upon the next re-initialization of the managed device restartTime OBJECT IDENTIFIER ::= { temporalDomains 2 } -- the temporal domain { cacheTime N } refers to management -- information that is cached and guaranteed to be at most -- N seconds old cacheTime OBJECT IDENTIFIER ::= { temporalDomains 3 } Expires July 26, 1993 [Page 7] Draft Party MIB for SNMPv2 Jan 93 -- Definition of Initial Party and Context Identifiers -- When devices are installed, they need to be configured -- with an initial set of SNMPv2 parties and contexts. The -- configuration of SNMPv2 parties and contexts requires (among -- other things) the assignment of several OBJECT IDENTIFIERs. -- Any local network administration can obtain the delegated -- authority necessary to assign its own OBJECT IDENTIFIERs. -- However, to provide for those administrations who have not -- obtained the necessary authority, this document allocates a -- branch of the naming tree for use with the following -- conventions. initialPartyId OBJECT IDENTIFIER ::= { partyAdmin 3 } initialContextId OBJECT IDENTIFIER ::= { partyAdmin 4 } -- Note these are identified as "initial" party and context -- identifiers since these allow secure SNMPv2 communication -- to proceed, thereby allowing further SNMPv2 parties to be -- configured through use of the SNMPv2 itself. -- The following definitions identify a party identifier, and -- specify the initial values of various object instances -- indexed by that identifier. In addition, the SNMPv2 -- context, access control policy, and MIB view information -- assigned, by convention, are identified Expires July 26, 1993 [Page 8] Draft Party MIB for SNMPv2 Jan 93 -- Party Identifiers for use as initial SNMPv2 parties -- at IP address a.b.c.d -- Note that for all OBJECT IDENTIFIERs assigned under -- initialPartyId, the four sub-identifiers immediately -- following initialPartyId represent the four octets of -- an IP address. Initial party identifiers for other address -- families are assigned under a different OBJECT IDENTIFIER, -- as defined elsewhere. -- Devices which support SNMPv2 as entities acting in an -- agent role, and accessed via the snmpUDPDomain transport -- domain, are required to be configured with the appropriate -- set of the following as implicit assignments as and when -- they are configured with an IP address. The appropriate -- set is all those applicable to the authentication and -- privacy protocols supported by the device. Expires July 26, 1993 [Page 9] Draft Party MIB for SNMPv2 Jan 93 -- a noAuth/noPriv party which executes at the agent -- partyIdentity = { initialPartyId a b c d 1 } -- partyIndex = 1 -- partyTDomain = snmpUDPDomain -- partyTAddress = a.b.c.d, 161 -- partyLocal = true (in agent's database) -- partyAuthProtocol = noAuth -- partyAuthClock = 0 -- partyAuthPrivate = ''H (the empty string) -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 0 -- partyPrivProtocol = noPriv -- partyPrivPrivate = ''H (the empty string) -- partyPrivPublic = ''H (the empty string) -- a noAuth/noPriv party which executes at a manager -- partyIdentity = { initialPartyId a b c d 2 } -- partyIndex = 2 -- partyTDomain = snmpUDPDomain -- partyTAddress = assigned by local administration -- partyLocal = false (in agent's database) -- partyAuthProtocol = noAuth -- partyAuthClock = 0 -- partyAuthPrivate = ''H (the empty string) -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 0 -- partyPrivProtocol = noPriv -- partyPrivPrivate = ''H (the empty string) -- partyPrivPublic = ''H (the empty string) Expires July 26, 1993 [Page 10] Draft Party MIB for SNMPv2 Jan 93 -- a md5Auth/noPriv party which executes at the agent -- partyIdentity = { initialPartyId a b c d 3 } -- partyIndex = 3 -- partyTDomain = snmpUDPDomain -- partyTAddress = a.b.c.d, 161 -- partyLocal = true (in agent's database) -- partyAuthProtocol = v2md5AuthProtocol -- partyAuthClock = 0 -- partyAuthPrivate = assigned by local administration -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 300 -- partyPrivProtocol = noPriv -- partyPrivPrivate = ''H (the empty string) -- partyPrivPublic = ''H (the empty string) -- a md5Auth/noPriv party which executes at a manager -- partyIdentity = { initialPartyId a b c d 4 } -- partyIndex = 4 -- partyTDomain = snmpUDPDomain -- partyTAddress = assigned by local administration -- partyLocal = false (in agent's database) -- partyAuthProtocol = v2md5AuthProtocol -- partyAuthClock = 0 -- partyAuthPrivate = assigned by local administration -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 300 -- partyPrivProtocol = noPriv -- partyPrivPrivate = ''H (the empty string) -- partyPrivPublic = ''H (the empty string) Expires July 26, 1993 [Page 11] Draft Party MIB for SNMPv2 Jan 93 -- a md5Auth/desPriv party which executes at the agent -- partyIdentity = { initialPartyId a b c d 5 } -- partyIndex = 5 -- partyTDomain = snmpUDPDomain -- partyTAddress = a.b.c.d, 161 -- partyLocal = true (in agent's database) -- partyAuthProtocol = v2md5AuthProtocol -- partyAuthClock = 0 -- partyAuthPrivate = assigned by local administration -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 300 -- partyPrivProtocol = desPrivProtocol -- partyPrivPrivate = assigned by local administration -- partyPrivPublic = ''H (the empty string) -- a md5Auth/desPriv party which executes at a manager -- partyIdentity = { initialPartyId a b c d 6 } -- partyIndex = 6 -- partyTDomain = snmpUDPDomain -- partyTAddress = assigned by local administration -- partyLocal = false (in agent's database) -- partyAuthProtocol = v2md5AuthProtocol -- partyAuthClock = 0 -- partyAuthPrivate = assigned by local administration -- partyAuthPublic = ''H (the empty string) -- partyAuthLifetime = 300 -- partyPrivProtocol = desPrivProtocol -- partyPrivPrivate = assigned by local administration -- partyPrivPublic = ''H (the empty string) Expires July 26, 1993 [Page 12] Draft Party MIB for SNMPv2 Jan 93 -- the initial SNMPv2 contexts assigned, by convention, are: -- contextIdentity = { initialContextId a b c d 1 } -- contextIndex = 1 -- contextLocal = true (in agent's database) -- contextViewIndex = 1 -- contextLocalEntity = ''H (the empty string) -- contextLocalTime = currentTime -- contextProxyDstParty = { 0 0 } -- contextProxySrcParty = { 0 0 } -- contextProxyContext = { 0 0 } -- contextIdentity = { initialContextId a b c d 2 } -- contextIndex = 2 -- contextLocal = true (in agent's database) -- contextViewIndex = 2 -- contextLocalEntity = ''H (the empty string) -- contextLocalTime = currentTime -- contextProxyDstParty = { 0 0 } -- contextProxySrcParty = { 0 0 } -- contextProxyContext = { 0 0 } Expires July 26, 1993 [Page 13] Draft Party MIB for SNMPv2 Jan 93 -- The initial access control policy assigned, by -- convention, is: -- aclTarget = 1 -- aclSubject = 2 -- aclResources = 1 -- aclPrivileges = 35 (Get, Get-Next & Get-Bulk) -- aclTarget = 2 -- aclSubject = 1 -- aclResources = 1 -- aclPrivileges = 132 (Response & SNMPv2-Trap) -- aclTarget = 3 -- aclSubject = 4 -- aclResources = 2 -- aclPrivileges = 43 (Get, Get-Next, Set & Get-Bulk) -- aclTarget = 4 -- aclSubject = 3 -- aclResources = 2 -- aclPrivileges = 4 (Response) -- aclTarget = 5 -- aclSubject = 6 -- aclResources = 2 -- aclPrivileges = 43 (Get, Get-Next, Set & Get-Bulk) -- aclTarget = 6 -- aclSubject = 5 -- aclResources = 2 -- aclPrivileges = 4 (Response) -- Note that the initial context and access control | -- information assigned above, by default, to the | -- md5Auth/desPriv parties are identical to those assigned to | -- the md5Auth/noPriv parties. However, each administration | -- may choose to have different authorization policies, | -- depending on whether privacy is used. | Expires July 26, 1993 [Page 14] Draft Party MIB for SNMPv2 Jan 93 -- The initial MIB views assigned, by convention, are: -- viewIndex = 1 -- viewSubtree = system -- viewMask = ''H -- viewType = included -- viewIndex = 1 -- viewSubtree = snmpStats -- viewMask = ''H -- viewType = included -- viewIndex = 1 -- viewSubtree = snmpParties -- viewMask = ''H -- viewType = included -- viewIndex = 2 -- viewSubtree = internet -- viewMask = ''H -- viewType = included -- note that snmpV2 will be moved under internet later on... | -- Note that full access to the partyTable, contextTable, + -- aclTable, and viewTable gives a manager the ability to + -- configure any parties with any/all capabilities (the + -- equivalent of "root" access). A lesser manager can be + -- given access only to the partyTable so that it can + -- maintain its own parties, but not increase/decrease + -- their capabilities. Such a lesser manager can also + -- create new parties but they are of no use to it. + Expires July 26, 1993 [Page 15] Draft Party MIB for SNMPv2 Jan 93 -- object assignments partyMIBObjects OBJECT IDENTIFIER ::= { partyMIB 2 } -- the SNMPv2 party database group snmpParties OBJECT IDENTIFIER ::= { partyMIBObjects 1 } partyTable OBJECT-TYPE SYNTAX SEQUENCE OF PartyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SNMPv2 Party database." ::= { snmpParties 1 } partyEntry OBJECT-TYPE SYNTAX PartyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Locally held information about a particular SNMPv2 party." INDEX { IMPLIED partyIdentity } ::= { partyTable 1 } Expires July 26, 1993 [Page 16] Draft Party MIB for SNMPv2 Jan 93 PartyEntry ::= SEQUENCE { partyIdentity Party, partyIndex INTEGER, partyTDomain OBJECT IDENTIFIER, partyTAddress TAddress, partyMaxMessageSize INTEGER, partyLocal TruthValue, partyAuthProtocol OBJECT IDENTIFIER, partyAuthClock Clock, partyAuthPrivate OCTET STRING, partyAuthPublic OCTET STRING, partyAuthLifetime INTEGER, partyPrivProtocol OBJECT IDENTIFIER, partyPrivPrivate OCTET STRING, partyPrivPublic OCTET STRING, partyCloneFrom Party, + partyStorageType StorageType, partyStatus RowStatus } partyIdentity OBJECT-TYPE SYNTAX Party MAX-ACCESS not-accessible STATUS current DESCRIPTION "A party identifier uniquely identifying a particular SNMPv2 party." ::= { partyEntry 1 } partyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each SNMPv2 party. The value for each SNMPv2 party must remain constant at least from one re-initialization of the entity's network management system to the next re- initialization." ::= { partyEntry 2 } Expires July 26, 1993 [Page 17] Draft Party MIB for SNMPv2 Jan 93 partyTDomain OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the kind of transport service by which the party receives network management traffic." DEFVAL { snmpUDPDomain } ::= { partyEntry 3 } partyTAddress OBJECT-TYPE SYNTAX TAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The transport service address by which the party receives network management traffic, formatted according to the corresponding value of partyTDomain. For snmpUDPDomain, partyTAddress is formatted as a 4-octet IP Address concatenated with a 2-octet UDP port number." DEFVAL { '000000000000'h } ::= { partyEntry 4 } partyMaxMessageSize OBJECT-TYPE SYNTAX INTEGER (484..65507) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum length in octets of a SNMPv2 message which this party will accept. For parties which execute at an agent, the agent initializes this object to the maximum length supported by the agent, and does not let the object be set to any larger value. For parties which do not execute at the agent, the agent must allow the manager to set this object to any legal value, even if it is larger than the agent can generate." DEFVAL { 484 } ::= { partyEntry 5 } Expires July 26, 1993 [Page 18] Draft Party MIB for SNMPv2 Jan 93 partyLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of whether this party executes at this SNMPv2 entity. If this object has a value of true(1), then the SNMPv2 entity will listen for SNMPv2 messages on the partyTAddress associated with this party. If this object has the value false(2), then the SNMPv2 entity will not listen for SNMPv2 messages on the partyTAddress associated with this party." DEFVAL { false } ::= { partyEntry 6 } partyAuthProtocol OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication protocol by which all messages generated by the party are authenticated as to origin and integrity. The value noAuth signifies that messages generated by the party are not | authenticated. | Once an instance of this object is created, its | value can not be changed." | DEFVAL { v2md5AuthProtocol } ::= { partyEntry 7 } Expires July 26, 1993 [Page 19] Draft Party MIB for SNMPv2 Jan 93 partyAuthClock OBJECT-TYPE SYNTAX Clock MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication clock which represents the local notion of the current time specific to the party. This value must not be decremented unless the party's private authentication key is changed simultaneously." DEFVAL { 0 } ::= { partyEntry 8 } Expires July 26, 1993 [Page 20] Draft Party MIB for SNMPv2 Jan 93 partyAuthPrivate OBJECT-TYPE SYNTAX OCTET STRING -- for v2md5AuthProtocol: (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "An encoding of the party's private authentication key which may be needed to support the authentication protocol. Although the value of this variable may be altered by a management operation (e.g., a SNMPv2 Set-Request), its value can never be retrieved by a management operation: when read, the value of this variable is the zero length OCTET STRING. The private authentication key is NOT directly represented by the value of this variable, but rather it is represented according to an encoding. This encoding is the bitwise exclusive-OR of the old key with the new key, i.e., of the old private authentication key (prior to the alteration) with the new private authentication key (after the alteration). Thus, when processing a received protocol Set operation, the new private authentication key is obtained from the value of this variable as the result of a bitwise exclusive-OR of the variable's value and the old private authentication key. In calculating the exclusive-OR, if the old key is shorter than the new key, zero-valued padding is appended to the old key. If no value for the old key exists, a zero-length OCTET STRING is used in the calculation." DEFVAL { ''H } -- the empty string ::= { partyEntry 9 } Expires July 26, 1993 [Page 21] Draft Party MIB for SNMPv2 Jan 93 partyAuthPublic OBJECT-TYPE SYNTAX OCTET STRING -- for v2md5AuthProtocol: (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "A publically-readable value for the party. Depending on the party's authentication protocol, this value may be needed to support the party's authentication protocol. Alternatively, it may be used by a manager during the procedure for altering secret information about a party. (For example, by altering the value of an instance of this object in the same SNMPv2 Set-Request used to update an instance of partyAuthPrivate, a subsequent Get-Request can determine if the Set- Request was successful in the event that no response to the Set-Request is received, see [4].) The length of the value is dependent on the party's authentication protocol. If not used by the authentication protocol, it is recommended that agents support values of any length up to and including the length of the corresponding partyAuthPrivate object." DEFVAL { ''H } -- the empty string ::= { partyEntry 10 } Expires July 26, 1993 [Page 22] Draft Party MIB for SNMPv2 Jan 93 partyAuthLifetime OBJECT-TYPE SYNTAX INTEGER (0..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The lifetime (in units of seconds) which represents an administrative upper bound on acceptable delivery delay for protocol messages | generated by the party. | Once an instance of this object is created, its | value can not be changed." | DEFVAL { 300 } ::= { partyEntry 11 } partyPrivProtocol OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "The privacy protocol by which all protocol messages received by the party are protected from disclosure. The value noPriv signifies that | messages received by the party are not protected. | Once an instance of this object is created, its | value can not be changed." | DEFVAL { noPriv } ::= { partyEntry 12 } Expires July 26, 1993 [Page 23] Draft Party MIB for SNMPv2 Jan 93 partyPrivPrivate OBJECT-TYPE SYNTAX OCTET STRING -- for desPrivProtocol: (SIZE (16)) MAX-ACCESS read-create STATUS current DESCRIPTION "An encoding of the party's private encryption key which may be needed to support the privacy protocol. Although the value of this variable may be altered by a management operation (e.g., a SNMPv2 Set-Request), its value can never be retrieved by a management operation: when read, the value of this variable is the zero length OCTET STRING. The private encryption key is NOT directly represented by the value of this variable, but rather it is represented according to an encoding. This encoding is the bitwise exclusive-OR of the old key with the new key, i.e., of the old private encryption key (prior to the alteration) with the new private encryption key (after the alteration). Thus, when processing a received protocol Set operation, the new private encryption key is obtained from the value of this variable as the result of a bitwise exclusive-OR of the variable's value and the old private encryption key. In calculating the exclusive-OR, if the old key is shorter than the new key, zero-valued padding is appended to the old key. If no value for the old key exists, a zero-length OCTET STRING is used in the calculation." DEFVAL { ''H } -- the empty string ::= { partyEntry 13 } Expires July 26, 1993 [Page 24] Draft Party MIB for SNMPv2 Jan 93 partyPrivPublic OBJECT-TYPE SYNTAX OCTET STRING -- for desPrivProtocol: (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "A publically-readable value for the party. Depending on the party's privacy protocol, this value may be needed to support the party's privacy protocol. Alternatively, it may be used by a manager as a part of its procedure for altering secret information about a party. (For example, by altering the value of an instance of this object in the same SNMPv2 Set-Request used to update an instance of partyPrivPrivate, a subsequent Get-Request can determine if the Set- Request was successful in the event that no response to the Set-Request is received, see [4].) The length of the value is dependent on the party's privacy protocol. If not used by the privacy protocol, it is recommended that agents support values of any length up to and including the length of the corresponding partyPrivPrivate object." DEFVAL { ''H } -- the empty string ::= { partyEntry 14 } Expires July 26, 1993 [Page 25] Draft Party MIB for SNMPv2 Jan 93 partyCloneFrom OBJECT-TYPE + SYNTAX Party + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The identity of a party to clone authentication + and privacy parameters from. When read, the value + { 0 0 } is returned. + This value can only be written when the associated + instance of partyStatus either does not exist or + has the value `notReady'. When written, the value + identifies a party, the cloning party, whose + status column has the value `active'. The cloning + party is used in two ways. + One, if instances of the following objects do not + exist for the party being created, then they are + created with values identical to those of the + corresponding objects for the cloning party: + partyAuthProtocol + partyAuthPublic + partyAuthLifetime + partyPrivProtocol + partyPrivPublic + Two, instances of the following objects are + updated using the corresponding values of the + cloning party: + partyAuthPrivate + partyPrivPrivate + (e.g., the value of the cloning party's instance + of the partyAuthPrivate object is XOR'd with the + value of the partyAuthPrivate instances of the + party being created.)" + ::= { partyEntry 15 } + Expires July 26, 1993 [Page 26] Draft Party MIB for SNMPv2 Jan 93 partyStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the partyTable." DEFVAL { nonVolatile } ::= { partyEntry 16 } | partyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the partyTable. A party is not qualified for activation until instances of all columns of its partyEntry row have an appropriate value. In particular: | A value must be written to the Party's | partyCloneFrom object. | If the Party's partyAuthProtocol object has the | value md5AuthProtocol, | then the corresponding instance of partyAuthPrivate must contain a secret of the | appropriate length. Further, at least one | management protocol set operation updating the | value of the party's partyAuthPrivate object | must be successfully processed, before the | partyAuthPrivate column is considered | appropriately configured. | If the Party's partyPrivProtocol object has the | value desPrivProtocol, | then the corresponding instance of partyPrivPrivate must contain a secret of the appropriate length. Further, at least one + management protocol set operation updating the + value of the party's partyPrivPrivate object + must be successfully processed, before the + partyPrivPrivate column is considered + Expires July 26, 1993 [Page 27] Draft Party MIB for SNMPv2 Jan 93 appropriately configured. + Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the partyStatus column is `notReady'." ::= { partyEntry 17 } | Expires July 26, 1993 [Page 28] Draft Party MIB for SNMPv2 Jan 93 -- the SNMPv2 contexts database group snmpContexts OBJECT IDENTIFIER ::= { partyMIBObjects 2 } contextTable OBJECT-TYPE SYNTAX SEQUENCE OF ContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The SNMPv2 Context database." ::= { snmpContexts 1 } contextEntry OBJECT-TYPE SYNTAX ContextEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Locally held information about a particular SNMPv2 context." INDEX { IMPLIED contextIdentity } ::= { contextTable 1 } ContextEntry ::= SEQUENCE { contextIdentity Context, contextIndex INTEGER, contextLocal TruthValue, contextViewIndex INTEGER, contextLocalEntity OCTET STRING, contextLocalTime OBJECT IDENTIFIER, contextProxyDstParty Party, contextProxySrcParty Party, contextProxyContext OBJECT IDENTIFIER, contextStorageType StorageType, contextStatus RowStatus } Expires July 26, 1993 [Page 29] Draft Party MIB for SNMPv2 Jan 93 contextIdentity OBJECT-TYPE SYNTAX Context MAX-ACCESS not-accessible STATUS current DESCRIPTION "A context identifier uniquely identifying a particular SNMPv2 context." ::= { contextEntry 1 } contextIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each SNMPv2 context. The value for each SNMPv2 context must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { contextEntry 2 } contextLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "An indication of whether this context is realized by this SNMPv2 entity." DEFVAL { true } ::= { contextEntry 3 } Expires July 26, 1993 [Page 30] Draft Party MIB for SNMPv2 Jan 93 contextViewIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of an instance of this object is zero, then this corresponding conceptual row in the contextTable refers to a SNMPv2 context which identifies a proxy relationship; the values of the corresponding instances of the contextProxyDstParty, contextProxySrcParty, and contextProxyContext objects provide further information on the proxy relationship. Otherwise, if the value of an instance of this object is greater than zero, then this corresponding conceptual row in the contextTable refers to a SNMPv2 context which identifies a MIB view of a locally accessible entity; the value of the instance identifies the particular MIB view which has the same value of viewIndex; and the value of the corresponding instances of the contextLocalEntity and contextLocalTime objects provide further information on the local entity and its temporal domain." ::= { contextEntry 4 } Expires July 26, 1993 [Page 31] Draft Party MIB for SNMPv2 Jan 93 contextLocalEntity OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object identifies the local entity whose management information is in the SNMPv2 context's MIB view. The empty string indicates that the MIB view contains the SNMPv2 entity's own local management information; otherwise, a non-empty string indicates that the MIB view contains management information of some other local entity, e.g., 'Repeater1'." DEFVAL { ''H } -- the empty string ::= { contextEntry 5 } contextLocalTime OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object identifies the temporal context of the management information in the MIB view." DEFVAL { currentTime } ::= { contextEntry 6 } Expires July 26, 1993 [Page 32] Draft Party MIB for SNMPv2 Jan 93 contextProxyDstParty OBJECT-TYPE SYNTAX Party MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies a SNMPv2 party which is the proxy destination of a proxy relationship. If the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object is zero." ::= { contextEntry 7 } contextProxySrcParty OBJECT-TYPE SYNTAX Party MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies a SNMPv2 party which is the proxy source of a proxy relationship. Interpretation of an instance of this object depends upon the value of the transport domain associated with the SNMPv2 party used as the proxy destination in this proxy relationship. If the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object is zero." ::= { contextEntry 8 } Expires July 26, 1993 [Page 33] Draft Party MIB for SNMPv2 Jan 93 contextProxyContext OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of the corresponding instance of the contextViewIndex is equal to zero, then the value of an instance of this object identifies the context of a proxy relationship. Interpretation of an instance of this object depends upon the value of the transport domain associated with the SNMPv2 party used as the proxy destination in this proxy relationship. If the value of the corresponding instance of the contextViewIndex is greater than zero, then the value of an instance of this object is { 0 0 }." ::= { contextEntry 9 } contextStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the contextTable." DEFVAL { nonVolatile } ::= { contextEntry 10 } Expires July 26, 1993 [Page 34] Draft Party MIB for SNMPv2 Jan 93 contextStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the contextTable. A context is not qualified for activation until instances of all corresponding columns have the appropriate value. In particular, if the context's contextViewIndex is greater than zero, then the viewStatus column of the associated conceptual row(s) in the viewTable must have the value `active'. Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the contextStatus column is `notReady'." ::= { contextEntry 11 } Expires July 26, 1993 [Page 35] Draft Party MIB for SNMPv2 Jan 93 -- the SNMPv2 access privileges database group snmpAccess OBJECT IDENTIFIER ::= { partyMIBObjects 3 } aclTable OBJECT-TYPE SYNTAX SEQUENCE OF AclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The access privileges database." ::= { snmpAccess 1 } aclEntry OBJECT-TYPE SYNTAX AclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The access privileges for a particular subject SNMPv2 party when asking a particular target SNMPv2 party to access a particular SNMPv2 context." INDEX { aclTarget, aclSubject, aclResources } ::= { aclTable 1 } AclEntry ::= SEQUENCE { aclTarget INTEGER, aclSubject INTEGER, aclResources INTEGER, aclPrivileges INTEGER, aclStorageType StorageType, aclStatus RowStatus } Expires July 26, 1993 [Page 36] Draft Party MIB for SNMPv2 Jan 93 aclTarget OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of an instance of this object identifies a SNMPv2 party which is the target of an access control policy, and has the same value as the instance of the partyIndex object for that party." ::= { aclEntry 1 } aclSubject OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of an instance of this object identifies a SNMPv2 party which is the subject of an access control policy, and has the same value as the instance of the partyIndex object for that SNMPv2 party." ::= { aclEntry 2 } aclResources OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of an instance of this object identifies a SNMPv2 context in an access control policy, and has the same value as the instance of the contextIndex object for that SNMPv2 context." ::= { aclEntry 3 } Expires July 26, 1993 [Page 37] Draft Party MIB for SNMPv2 Jan 93 aclPrivileges OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The access privileges which govern what management operations a particular target party may perform with respect to a particular SNMPv2 context when requested by a particular subject party. These privileges are specified as a sum of values, where each value specifies a SNMPv2 PDU type by which the subject party may request a permitted operation. The value for a particular PDU type is computed as 2 raised to the value of the ASN.1 context-specific tag for the appropriate SNMPv2 PDU type. The values (for the tags defined in [5]) are defined in [3] as: Get : 1 GetNext : 2 Response : 4 Set : 8 unused : 16 GetBulk : 32 Inform : 64 SNMPv2-Trap : 128 The null set is represented by the value zero." DEFVAL { 35 } -- Get, Get-Next & Get-Bulk ::= { aclEntry 4 } aclStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the aclTable." DEFVAL { nonVolatile } ::= { aclEntry 5 } Expires July 26, 1993 [Page 38] Draft Party MIB for SNMPv2 Jan 93 aclStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the aclTable." ::= { aclEntry 6 } Expires July 26, 1993 [Page 39] Draft Party MIB for SNMPv2 Jan 93 -- the MIB view database group snmpViews OBJECT IDENTIFIER ::= { partyMIBObjects 4 } viewTable OBJECT-TYPE SYNTAX SEQUENCE OF ViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Locally held information about the MIB views known to this SNMPv2 entity. Each SNMPv2 context which is locally accessible has a single MIB view which is defined by two collections of view subtrees: the included view subtrees, and the excluded view subtrees. Every such subtree, both included and excluded, is defined in this table. To determine if a particular object instance is in a particular MIB view, compare the object instance's OBJECT IDENTIFIER with each of the MIB view's entries in this table. If none match, then the object instance is not in the MIB view. If one or more match, then the object instance is included in, or excluded from, the MIB view according to the value of viewType in the entry whose value of viewSubtree has the most sub- identifiers. If multiple entries match and have the same number of sub-identifiers, then the lexicographically greatest instance of viewType determines the inclusion or exclusion. An object instance's OBJECT IDENTIFIER X matches an entry in this table when the number of sub- identifiers in X is at least as many as in the value of viewSubtree for the entry, and each sub- identifier in the value of viewSubtree matches its corresponding sub-identifier in X. Two sub- identifiers match either if the corresponding bit of viewMask is zero (the 'wild card' value), or if they are equal. Due to this 'wild card' capability, we introduce Expires July 26, 1993 [Page 40] Draft Party MIB for SNMPv2 Jan 93 the term, a 'family' of view subtrees, to refer to the set of subtrees defined by a particular combination of values of viewSubtree and viewMask. In the case where no 'wild card' is defined in viewMask, the family of view subtrees reduces to a single view subtree." ::= { snmpViews 1 } viewEntry OBJECT-TYPE SYNTAX ViewEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a particular family of view subtrees included in or excluded from a particular | SNMPv2 context's MIB view. | Implementations must not restrict the number of | families of view subtrees for a given MIB view, | except as dictated by resource constraints on the | overall number of entries in the viewTable." | INDEX { viewIndex, IMPLIED viewSubtree } ::= { viewTable 1 } ViewEntry ::= SEQUENCE { viewIndex INTEGER, viewSubtree OBJECT IDENTIFIER, viewMask OCTET STRING, viewType INTEGER, viewStorageType StorageType, viewStatus RowStatus } Expires July 26, 1993 [Page 41] Draft Party MIB for SNMPv2 Jan 93 viewIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each MIB view. The value for each MIB view must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization." ::= { viewEntry 1 } viewSubtree OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MIB subtree." ::= { viewEntry 2 } viewMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The bit mask which, in combination with the corresponding instance of viewSubtree, defines a family of view subtrees. Each bit of this bit mask corresponds to a sub- identifier of viewSubtree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', i.e., any sub-identifier value matches. Expires July 26, 1993 [Page 42] Draft Party MIB for SNMPv2 Jan 93 Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if the following criteria are met: for each sub-identifier of the value of viewSubtree, either: the i-th bit of viewMask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of viewSubtree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of viewSubtree, then the bit mask is extended with 1's to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all-1's being used (i.e., no 'wild card'), and the family of view subtrees is the one view subtree uniquely identified by the corresponding instance of viewSubtree." DEFVAL { ''H } ::= { viewEntry 3 } Expires July 26, 1993 [Page 43] Draft Party MIB for SNMPv2 Jan 93 viewType OBJECT-TYPE SYNTAX INTEGER { included(1), excluded(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a particular family of view subtrees within the particular SNMPv2 context's MIB view. The value 'included(1)' indicates that the corresponding instances of viewSubtree and viewMask define a family of view subtrees included in the MIB view. The value 'excluded(2)' indicates that the corresponding instances of viewSubtree and viewMask define a family of view subtrees excluded from the MIB view." DEFVAL { included } ::= { viewEntry 4 } viewStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the viewTable." DEFVAL { nonVolatile } ::= { viewEntry 5 } viewStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the viewTable." ::= { viewEntry 6 } Expires July 26, 1993 [Page 44] Draft Party MIB for SNMPv2 Jan 93 familyTable OBJECT-TYPE SYNTAX SEQUENCE OF FamilyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Locally held information about a family of view subtrees." ::= { snmpViews 2 } familyEntry OBJECT-TYPE SYNTAX FamilyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information on a particular family of view subtrees." INDEX { familyIndex } ::= { familyTable 1 } FamilyEntry ::= SEQUENCE { familyIndex INTEGER, familySubtree OBJECT IDENTIFIER, familyMask OCTET STRING, familyStorageType StorageType, familyStatus RowStatus } familyIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique value for each family of view subtrees. The value for each family of view subtrees must remain constant at least from one re- initialization of the entity's network management system to the next re-initialization." ::= { familyEntry 1 } Expires July 26, 1993 [Page 45] Draft Party MIB for SNMPv2 Jan 93 familySubtree OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS read-create STATUS current DESCRIPTION "An object identifier which, in combination with the corrsponding instance of familyMask, defines a family of view subtrees." ::= { familyEntry 2 } familyMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The bit mask which, in combination with the corresponding instance of familySubtree, defines a family of view subtrees." DEFVAL { ''H } ::= { familyEntry 3 } familyStorageType OBJECT-TYPE SYNTAX StorageType MAX-ACCESS read-create STATUS current DESCRIPTION "The storage type for this conceptual row in the familyTable." DEFVAL { nonVolatile } ::= { familyEntry 4 } familyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this conceptual row in the familyTable." ::= { familyEntry 5 } Expires July 26, 1993 [Page 46] Draft Party MIB for SNMPv2 Jan 93 -- conformance information partyMIBConformance OBJECT IDENTIFIER ::= { partyMIB 3 } partyMIBCompliances OBJECT IDENTIFIER ::= { partyMIBConformance 1 } partyMIBGroups OBJECT IDENTIFIER ::= { partyMIBConformance 2 } -- compliance statements unSecurableCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the Party MIB, but do not support any authentication or privacy protocols (i.e., | only the noAuth and noPriv protocols are | supported)." | MODULE -- this module MANDATORY-GROUPS { partyMIBGroup } ::= { partyMIBCompliances 1 } partyNoPrivacyCompliance MODULE-COMPLIANCE | STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the Party MIB, and support an authentication protocol, but do not support any privacy protocols (i.e., only the noAuth, | v2md5AuthProtocol, and noPriv protocols are | supported)." | MODULE -- this module MANDATORY-GROUPS { partyMIBGroup } ::= { partyMIBCompliances 2 } Expires July 26, 1993 [Page 47] Draft Party MIB for SNMPv2 Jan 93 partyPrivacyCompliance MODULE-COMPLIANCE | STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the Party MIB, support an authentication protocol, and support a privacy protocol ONLY for the purpose of accessing security parameters. - For all aclTable entries authorizing a subject and/or target SNMPv2 party whose privacy protocol is desPrivProtocol, to be used in accessing a SNMPv2 context, the MIB view for that SNMPv2 context shall include only those objects subordinate to partyMIBObjects, or a subset thereof, e.g., viewSubtree = { partyMIBObjects } viewMask = ''H viewType = { included } Any attempt to configure an entry in the partyTable, the contextTable, the aclTable or the viewTable such that a party using the desPrivProtocol would be authorized for use in accessing objects outside of the partyMIBObjects subtree shall result in the appropriate error response (e.g., wrongValue or inconsistentValue)." MODULE -- this module MANDATORY-GROUPS { partyMIBGroup } ::= { partyMIBCompliances 3 } Expires July 26, 1993 [Page 48] Draft Party MIB for SNMPv2 Jan 93 fullPrivacyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMPv2 entities which implement the Party MIB, support an authentication protocol, and support a privacy | protocol without restrictions on its use." | MODULE -- this module MANDATORY-GROUPS { partyMIBGroup } ::= { partyMIBCompliances 4 } -- units of conformance partyMIBGroup OBJECT-GROUP OBJECTS { partyIndex, partyTDomain, partyTAddress, partyMaxMessageSize, partyLocal, partyAuthProtocol, partyAuthClock, partyAuthPrivate, partyAuthPublic, partyAuthLifetime, partyPrivProtocol, partyPrivPrivate, partyPrivPublic, partyStorageType, partyStatus, partyCloneFrom, + contextIndex, contextLocal, contextViewIndex, contextLocalEntity, contextLocalTime, contextStorageType, contextStatus, aclTarget, aclSubject, aclPrivileges, aclStorageType, aclStatus, viewMask, viewType, viewStorageType, viewStatus } STATUS current DESCRIPTION "The collection of objects allowing the description and configuration of SNMPv2 parties. Note that objects which support proxy relationships are not included in this conformance group." ::= { partyMIBGroups 1 } END Expires July 26, 1993 [Page 49] Draft Party MIB for SNMPv2 Jan 93 3. Acknowledgments This document is based, almost entirely, on RFC 1353. Expires July 26, 1993 [Page 50] Draft Party MIB for SNMPv2 Jan 93 4. References [1] Information processing systems - Open Systems Interconnection - Specification of Abstract Syntax Notation One (ASN.1), International Organization for Standardization. International Standard 8824, (December, 1987). [2] J.D. Case, K. McCloghrie, M.T. Rose, S.L. Waldbusser, Structure of Management Information for version 2 of the Simple Network Management Protocol (SNMPv2). Internet- Draft, (January 26, 1993). | [3] J.R. Davin, J.M. Galvin, K. McCloghrie, Administrative Model for version 2 of the Simple Network Management Protocol (SNMPv2). Internet-Draft, (January 26, 1993). | [4] J.M. Galvin, K. McCloghrie, J.R. Davin, Security Protocols for version 2 of the Simple Network Management Protocol (SNMPv2). Internet-Draft, (January 26, 1993). | [5] J.D. Case, K. McCloghrie, M.T. Rose, S.L. Waldbusser, Protocol Operations for version 2 of the Simple Network Management Protocol (SNMPv2). Internet-Draft, (January | 26, 1993). | [5] J.D. Case, K. McCloghrie, M.T. Rose, S.L. Waldbusser, Transport Mappings for version 2 of the Simple Network Management Protocol (SNMPv2). Internet-Draft, (January | 26, 1993). | Expires July 26, 1993 [Page 51] Draft Party MIB for SNMPv2 Jan 93 Table of Contents 1 Introduction .......................................... 2 1.1 A Note on Terminology ............................... 2 2 Definitions ........................................... 3 3.1 Textual Conventions ................................. 4 3.2 Administrative Assignments .......................... 7 3.2.1 Initial Party and Context Identifiers ............. 8 3.3 Object Assignments .................................. 16 3.4 The SNMPv2 Party Database Group ..................... 16 3.5 The SNMPv2 Contexts Database Group .................. 29 3.5 The SNMPv2 Access Privileges Database Group ......... 36 3.6 The MIB View Database Group ......................... 40 3.7 Conformance Information ............................. 47 3.7.1 Compliance Statements ............................. 47 3.7.2 Units of Conformance .............................. 49 3 Acknowledgments ....................................... 50 4 References ............................................ 51 Expires July 26, 1993 [Page 52]