TOC 
SIMPLEE. Burger
Internet-DraftBEA Systems, Inc.
Intended status: Standards TrackH. Khartabil
Expires: July 2, 2008December 30, 2007


Instant Message Disposition Notification
draft-ietf-simple-imdn-05

Status of this Memo

By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.

This Internet-Draft will expire on July 2, 2008.

Abstract

Instant Messaging (IM) refers to the transfer of messages between users in real-time. This document provides a mechanism whereby endpoints can request Instant Message Disposition Notifications (IMDN), including delivery, processing and read notifications, for page-mode instant messages.

The Common Profile for Instant Messaging (CPIM) data format specified in RFC 3862 is extended with new header fields that enable endpoints to request IMDNs. A new message format is also defined to convey IMDNs.

This document also describes how SIP entities behave using this extension.



Table of Contents

1.  Introduction
2.  Conventions
3.  Terminology
4.  Overview
5.  Disposition Types
    5.1.  Delivery
    5.2.  Processing
    5.3.  Read
6.  New CPIM Header Fields
    6.1.  CPIM Header Field Namespace
    6.2.  Disposition-Notification
    6.3.  Message-ID
    6.4.  Original-To
    6.5.  IMDN-Record-Route
    6.6.  IMDN-Route
7.  Endpoint Behaviour
    7.1.  IM Sender
        7.1.1.  Constructing Instant Messages
        7.1.2.  Matching IMs with IMDNs
        7.1.3.  Keeping State
        7.1.4.  Aggregation of IMDNs
    7.2.  IM Recipient
        7.2.1.  Constructing IMDNs
8.  Intermediary Behaviour
    8.1.  Constructing Processing Notifications
    8.2.  Aggregation of IMDNs
9.  Identifying Messages
10.  Header Fields Formal Syntax
11.  IMDN Format
    11.1.  Structure of XML-Encoded IMDN Payload
        11.1.1.  The <message-id> Element
        11.1.2.  The <datetime> Element
        11.1.3.  The <recipient-uri> Element
        11.1.4.  The <original-recipient-uri> Element
        11.1.5.  The <subject> Element
        11.1.6.  The <disposition> Element
        11.1.7.  The <status> Element
        11.1.8.  The <note> Element
    11.2.  MIME Type for IMDN Payload
    11.3.  The RelaxNG Schema
12.  Transporting Messages using SIP
    12.1.  Endpoint Behaviour
        12.1.1.  Sending Requests
        12.1.2.  Sending Responses
        12.1.3.  Receiving Requests
    12.2.  Intermediary Behaviour
13.  Transporting Messages using MSRP
14.  Security Considerations
    14.1.  Forgery
    14.2.  Confidentiality
    14.3.  Non-Repudiation
15.  IANA Considerations
    15.1.  message/imdn+xml MIME TYPE
    15.2.  URN Sub-Namespace Registration for urn:ietf:params:xml:ns:imdn
    15.3.  Schema Registration
    15.4.  Registration for urn:ietf:params:imdn
    15.5.  Message/CPIM Header Field Registration
    15.6.  Content-Disposition: notification
16.  Acknowledgements
17.  References
    17.1.  Normative References
    17.2.  Informative References
§  Authors' Addresses
§  Intellectual Property and Copyright Statements




 TOC 

1.  Introduction

In many user-to-user message exchange systems, message senders often wish to know if the human recipient actually received or read a message.

Electronic Mail (Klensin, J., “Simple Mail Transfer Protocol,” April 2001.) [RFC2821] deals with this situation with Message Delivery Notifications (Hansen, T. and G. Vaudreuil, “Message Disposition Notification,” May 2004.) [RFC3798]. After the recipient views the message, her mail user agent generates a Message Delivery Notification, or MDN. The MDN is an e-mail that follows the format prescribed by RFC3798 (Hansen, T. and G. Vaudreuil, “Message Disposition Notification,” May 2004.) [RFC3798]. The fixed format ensures that an automaton can process the message.

Message/CPIM [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) is a message format used to generate instant messages. SIP [RFC3261] (Rosenberg et al., J., Shulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, “SIP: Session Initiation Protocol,” June 2002.) can carry instant messages generated using message/CPIM in SIP MESSAGE requests [RFC3428] (Campbell, B., “SIP Extension for Instant Messaging,” December 2002.).

This document extends Message/CPIM message format, much like Message Delivery Notifications extends Electronic Mail. This extension enables Instant Message Senders to request, create and send Instant Message Disposition Notifications (IMDN). This mechanism works for page-mode as well as session mode instant messages. This document only discusses page-mode. Session mode is left for future standardisation efforts.

IMDNs include positive delivery, negative delivery (i.e. a message did not get delivered successfully), read notifications as well as processed notifications. By using CPIM header fields, the IMDN request and delivery are abstracted outside the transport protocol allowing interoperability between different IM systems.



 TOC 

2.  Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC-2119 (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.) [RFC2119].

This document refers generically to the sender of a message in the masculine (he/him/his) and the recipient of the message in the feminine (she/her/hers). This convention is purely for convenience and makes no assumption about the gender of a message sender or recipient.



 TOC 

3.  Terminology



 TOC 

4.  Overview

The diagram below shows the basic protocol flow. An IM Sender creates an IM, adds IMDN request information the IM Sender is interested in receiving and then sends the IM. At a certain point in time, the IM Recipient or an intermediary determines that the user or application has received, did not receive, read, or otherwise disposed the IM. The mechanism by which an IM Recipient determines its user has read an IM is beyond the scope of this document. At that point, the IM Recipient or intermediary automatically generates a notification message to the IM Sender. This notification message is the Instant Message Disposition Notification (IMDN).

+--------------+                        +--------------+
|  IM Sender   |                        | IM Recipient |
|IMDN Recipient|                        | IMDN Sender  |
+--------------+                        +--------------+
        |                                       |
        |                                       |
        |         1. IM requesting IMDN         |
        |-------------------------------------->|
        |                                       |
        |                                       |
        |         2. IMDN (disposition)         |
        |<--------------------------------------|
        |                                       |
        |                                       |

Note that the recipient of an IMDN, in some instances, may not be the IM Sender. This is specifically true for page-mode IMs where the Address of Record (AOR) of the IM Sender, that is present in the IM, resolves to a different location or user agent than the IM originated. For simplicity, the rest of this document assumes that the IM Sender and the IMDN Recipient are the same and therefore will refer to both as the IM Sender.



 TOC 

5.  Disposition Types

There are three broad categories of disposition states. They are delivery, processing and read. Future extensions may introduce others.



 TOC 

5.1.  Delivery

The delivery notification type indicates whether the IM has been delivered to the IM Recipient or not. The delivery notification type can have the following states:



 TOC 

5.2.  Processing

The processing notification type indicates that an IM has been processed by an intermediary. The processing notification type can have the following states:



 TOC 

5.3.  Read

The read notification type indicates whether the IM Recipient rendered the IM to the user or not. The read notification type can have the following states:

In addition to text, some IMs may contain audio, video and still images. Therefore, the state "read" includes playing the audio or video file to the user.

Since there is no positive acknowledgement from the user, one cannot determine a priori the user actually read the IM. Thus, one cannot use the protocol described here as a non-repudiation service.



 TOC 

6.  New CPIM Header Fields

This specification extends the CPIM data format specified in RFC 3862 [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.). A new namespace is created as well as a number of new CPIM header fields.



 TOC 

6.1.  CPIM Header Field Namespace

Per CPIM (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) [RFC3862], this specification defines a new namespace for the CPIM extension header fields defined in the following sections. The namespace is:

urn:ietf:params:imdn

As per CPIM (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) [RFC3862] requirements, the new header fields defined in the following sections are prepended, in CPIM messages, by a prefix assigned to the URN through the NS header field of the CPIM message. The remaining of this specification always assumes an NS header field like this one:

NS: imdn <urn:ietf:params:imdn>.

Of course, clients are free to use any prefix and servers must accept any legal namespace prefix specification.



 TOC 

6.2.  Disposition-Notification

The IM Sender MUST include the Disposition-Notification header field to indicate the desire to receive IMDNs from the IM Recipient, for that specific IM. This header field is not needed if the IM Sender does not request an IMDN. Section 10 (Header Fields Formal Syntax) defines the syntax.



 TOC 

6.3.  Message-ID

The IM Sender MUST include the Message-ID header field in the IM that he wishes to receive an IMDN on. The Message-ID contains a globally unique message identifier the IM Sender can use to correlate received IMDNs. When the IM Sender receives an IMDN, it can compare its value with the value of the <message-id> element present in the IMDN payload. IMDNs also carry this header field. Note that since the IMDN is itself an IM, the Message-ID of the IMDN will be different than the Message-ID of the original IM. Section 10 (Header Fields Formal Syntax) defines the syntax.



 TOC 

6.4.  Original-To

An intermediary MAY insert an Original-To header field to the IM. The value of the Original-To field MUST be the address of the IM Receiver. The IM Recipient uses this header to indicate the original IM address in the IMDNs. The IM Recipient does this by populating the <original-recipient-uri> element in the IMDN. The intermediary MUST insert this header if the intermediary changes the CPIM To header field value. The header field MUST NOT appear more than once in an IM. The intermediary MUST NOT change this header field value if it is already present. Section 10 (Header Fields Formal Syntax) defines the syntax.



 TOC 

6.5.  IMDN-Record-Route

An intermediary MAY insert an IMDN-Record-Route header field to the IM. The value of the IMDN-Record-Route header field MUST be the address of the intermediary. Multiple IMDN-Record-Route header fields can appear in an IM. Section 10 (Header Fields Formal Syntax) defines the syntax.



 TOC 

6.6.  IMDN-Route

The IMDN-Route header field provides routing information by including one or more addresses where to route the IMDN. An intermediary that needs the IMDN to flow back through the same intermediary MUST add the IMDN-Record-Route header. When the IM Recipient creates the corresponding IMDN, the IM Recipient copies the IMDN-Record-Route headers into corresponding IMDN-Route header fields. Section 10 (Header Fields Formal Syntax) defines the syntax.



 TOC 

7.  Endpoint Behaviour



 TOC 

7.1.  IM Sender



 TOC 

7.1.1.  Constructing Instant Messages

An IM is constructed using CPIM Message Format defined in RFC 3862 [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.).



 TOC 

7.1.1.1.  Adding a Message-ID Header Field

If the IM sender requests the reception of IMDNs, the IM sender MUST include a Message-ID header field. The Message-ID field is populated with a value that is unique with at least 32 bits of randomness. This header field enables the IM Sender to match any IMDNs with their corresponding IMs.



 TOC 

7.1.1.2.  Adding a DateTime Header Field

Some devices are not able to retain state over long periods. For example, mobile devices may have memory limits or battery limits. These limits may mean these devices may not be able to, or may chose not to, keep sent messages for the purposes of correlating IMDNs with sent IMs. To make some use of IMDN in this case, we add a time stamp to the IM to indicate when the user sent the message. The IMDN returns this time stamp to enable the user to correlate the IM with the IMDN at the human level. We use the DateTime CPIM header field for this purpose. Thus, if the IM Sender would like an IMDN, the IM Sender MUST include the DateTime CPIM header field.



 TOC 

7.1.1.3.  Adding a Disposition-Notification Header Field

The Disposition-Notification conveys the type of disposition notification requested by the IM sender. There are three types of disposition notification: delivery, processing, and read. The delivery notification is further subdivided into failure and success delivery notifications. An IM Sender requests failure delivery notification by including a Disposition-Notification header field with value "negative-delivery". Similarly, a success notification is requested by including a Disposition-Notification header field with value "positive-delivery". The IM Send can request both types of delivery notifications for the same IM.

The IM Sender can request a processing notification by including a Disposition-Notification header field with value "processing".

The IM Sender can also request a read notification. The IM Sender MUST include a Disposition-Notification header field with the value "read" to request a read request.

The absence of this header field or the presence of the header field with an empty value indicates that the IM Sender is not requesting any IMDNs. Disposition-Notification header field values are comma separated. The IM Sender MAY request more than one type of IMDN for a single IM.

Future extensions may define other disposition notifications not defined in this document.

Section 10 (Header Fields Formal Syntax) describes the formal syntax for the Disposition-Notification header field. The following is an example CPIM body of an IM where the IM Sender requests positive and negative delivery notifications, but neither read notification nor processing notifications:

From: Alice <im:alice@example.com>
To: Bob <im:bob@example.com>
NS: imdn <urn:ietf:params:imdn>
imdn.Message-ID: 34jk324j
DateTime: 2006-04-04T12:16:49-05:00
imdn.Disposition-Notification: positive-delivery, negative-delivery
Content-type: text/plain
Content-length: 12

Hello World



 TOC 

7.1.2.  Matching IMs with IMDNs

An IM Sender matches an IMDN to an IM by matching the Message-ID header field value in the IM with the <message-id> element value in the body of the IMDN. If the IM was delivered to multiple recipients, the IM Sender uses the <recipient-uri> element and the <original-recipient-uri> element in the XML body of the IMDN it received to determine if the IM was sent to multiple recipients and to identify the IM Recipient that sent the IMDN.

An IM Sender can determine an IMDN is a disposition notification by noting the Content-Disposition in the IMDN is "notification". This does mean the IM Sender MUST understand the Content-Disposition MIME header in CPIM messages.



 TOC 

7.1.3.  Keeping State

This specification does not mandate the IM Sender to keep state for a sent IM.

Once an IM Sender sends an IM containing an IMDN request, it MAY preserve the IM context, principally the Message-ID, and other user-identifiable information such as the IM subject or content, and date and time it was sent. Without preservation of the IM context, the IM Sender will not be able to correlate the IMDN with the IM it sent. The IM Sender may find it impossible to preserve IM state if it has limited resources or does not have non-volatile memory and then loses power.

There is, however, the concept of "Sent Items" box in an application that stores sent IMs. This "Sent Items" box has the necessary information and may have a fancy user interface indicating the state of a sent IM. A unique Message-ID for this purpose proves to be useful. The length of time for items to remain in the "Sent Items" box is a user choice. The user is usually free to keep or delete items from the "Sent Items" box as she pleases or as the memory on the device reaches capacity.

Clearly, if an IM Sender loses its sent items state, for example, the user deletes items from the "Send Items" box, the client may use a different display strategy in response to apparently unsolicited IMDNs.

This specification also does not mandate an IM Sender to run any timers waiting for an IMDN. There are no time limits associated with when IMDNs may be received.

IMDNs may legitimately never be received. Likewise, the recipient may take a long time to actually read the message, so the time between the sending of an IM and the generation and ultimate receipt of the IMDN may simply take a very long time. Some clients may choose to purge the state associated with the sent IM. This is the reason for adding the time stamp in the IM and having it returned in the IMDN. This gives the user some opportunity of remembering what IM was sent. For example if the IMDN indicates that the IM the user sent at 2 p.m. last Thursday was delivered, the user has a chance of remembering that they sent an IM at 2 p.m. last Thursday.



 TOC 

7.1.4.  Aggregation of IMDNs

An IM Sender may send an IM to multiple recipients in one Transport Protocol Message (typically using a URI-List server) and request IMDNs. An IM Sender that requested IMDNs MUST be prepared to receive multiple aggregated or non-aggregated IMDNs. See Section 8.2 (Aggregation of IMDNs) for details.



 TOC 

7.2.  IM Recipient



 TOC 

7.2.1.  Constructing IMDNs

IM recipients examine the contents of the Disposition-Notification header field of the CPIM message to determine if an IMDN must be generated for that IM. Disposition-Notification header fields of CPIM messages can include one or more values. This implies that IM recipients may need to generate zero, one, or more IMDNs for that IM, for example a delivery notification as well as a read notification. In this case, the IM Recipient MUST be able to construct multiple IMDNs per IM. An IM Recipient MUST NOT construct more than one IMDN per disposition type. That is, it must not generate a delivery notification indicating "delivered" then followed by a delivery notification indicating "failed" for the same IM. If the IM Sender requested only failure notifications and the IM was successfully delivered, then no IMDNs will be generated.

The IM Recipient MUST NOT generate "processing" notifications.

A Disposition-Notification header field MUST NOT appear in an IMDN since it is forbidden to request an IMDN for an IMDN. An IM Sender MUST ignore a delivery notification request in an IMDN if present. The IM Sender MUST NOT send an IMDN for an IMDN.

An IMDN MUST contain a Message-ID header field. The same rules of uniqueness for the Message-ID header field that appears in an IM apply to an IMDN. The Message-ID header field in the IMDN is different and unrelated to the one in the IM.

An IM may contain a IMDN-Record-Route header field (see Section 8 (Intermediary Behaviour) for details). If IMDN-Record-Route header fields appear in the IM, the IM Recipient constructing the IMDN MUST copy the contents of the IMDN-Record-Route header fields into IMDN-Route header fields in the IMDN and maintain the order. The IMDN is then sent to the URI in the top IMDN-Route header field. IMDN-Record-Route header fields do not make sense in an IMDN and therefore MUST NOT be placed in an IMDN. IMDN Recipients MUST ignore it if present.

As stated in CPIM (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) [RFC3862], CPIM messages may need to support MIME headers other than Content-type. IM Recipients MUST insert a Content-Disposition header field, set to the value "notification". This indicates to the IM Sender that the message is an IMDN to an IM it has earlier sent.



 TOC 

7.2.1.1.  Constructing Delivery Notifications

The IM Recipient constructs a delivery notification in a similar fashion as an IM, using a CPIM body [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) that carries a Disposition Notification XML document formatted according to the rules specified in Section 11 (IMDN Format). The MIME type of the Disposition Notification XML document is "message/imdn+xml".

Section 10 (Header Fields Formal Syntax) defines the schema for an IMDN.

An example CPIM body of IMDN looks like the following:

From: Bob <im:bob@example.com>
To: Alice <im:alice@example.com>
NS: imdn <urn:ietf:params:imdn>
imdn.Message-ID: d834jied93rf
Content-type: message/imdn+xml
Content-Disposition: notification
Content-length: ...

<?xml version="1.0" encoding="UTF-8"?>
<imdn xlmns="urn:ietf:params:xml:ns:imdn">
   <message-id>34jk324j</message-id>
   <datetime>2006-04-04T12:16:49-05:00</datetime>
   <recipient-uri>im:bob@example.com</recipient-uri>
   <original-recipient-uri>
       im:bob@example.com
   </original-recipient-uri>
   <disposition>
      <delivery/>
   </disposition>
   <status>
      <delivered/>
   </status>
   <note lang="en">The IM was successfully Delivered</note>
</imdn>



 TOC 

7.2.1.2.  Constructing Read Notifications

The IM Recipient constructs a read notification in a similar fashion as the delivery notification. See Section 7.2.1.1 (Constructing Delivery Notifications) for details.

Section 10 (Header Fields Formal Syntax) defines the schema for an IMDN.

An example looks like the following:

From: Bob <im:bob@example.com>
To: Alice <im:alice@example.com>
NS: imdn <urn:ietf:params:imdn>
imdn.Message-ID: dfjkleriou432333
Content-type: message/imdn+xml
Content-Disposition: notification
Content-length: ...

<?xml version="1.0" encoding="UTF-8"?>
<imdn xlmns="urn:ietf:params:xml:ns:imdn">
   <message-id>34jk324j</message-id>
   <datetime>2006-04-04T12:16:49-05:00</datetime>
   <recipient-uri>im:bob@example.com</recipient-uri>
   <original-recipient-uri>
       im:bob@example.com
   </original-recipient-uri>
   <disposition>
      <read/>
   </disposition>
   <status>
      <read/>
   </status>
   <note lang="en">The IM has been read</note>
</imdn>

There are situations where the IM Recipient cannot determine if or when the IM has been read. The IM Recipient in this case generates a read notification with a <status> value of "error" to indicate an internal error by the server. Note that the IM Recipient may choose to ignore any IMDN requests and not to send any IMDNs. An IM recipient may not wish to let a sender know she read, or did not read, a particular message. Likewise, she may not want anyone to know if she reads messages. This could be on a per-message, per-sender, or programmed policy choice.



 TOC 

8.  Intermediary Behaviour

In this context, intermediaries are application servers (including URI-List servers and Store-and-Forward server) and gateways. A gateway is a server the translates between different IM systems that use different protocols.

A URI-List server may change the IM Recipient address from its own to the address of the final recipient of that IM for every copy it makes that it sends to the list members (see [I‑D.ietf‑sip‑uri‑list‑message] (Garcia-Martin, M. and G. Camarillo, “Multiple-Recipient MESSAGE Requests in the Session Initiation Protocol (SIP),” December 2007.) for details). In this case, if the IM Sender is requesting an IMDN, the intermediary SHOULD add an Original-To header field to the IM populating it with the address that was in the CPIM To header field before it was changed. I.e., the Original-To header field is populated with the intermediary address. An intermediary MUST NOT add an Original-To header field if one already exists. An intermediary MAY have an administrative configuration to not reveal the original Request-URI, and as such, MAY chose not to add an Original-To header.

An intermediary MAY choose to remain on the path of IMDNs for a specific IM. It can do so by adding a CPIM IMDN-Record-Route header field as the top IMDN-Record-Route header field and populating it with its own address. An intermediary that does not support this extension will obviously not add the IMDN-Record-Route header field. This allows IMDNs to traverse directly from the IM Recipient to the IM Sender even if the IM traversed an intermediary not supporting this extension.

An intermediary receiving an IMDN checks the top IMDN-Route header field. If that header field carries the intermediary address, the intermediary removes that value and forwards the IMDN to the address indicated in the now top IMDN-Route header field. If no IMDN-Route header fields are present, the IMDN is forwarded to the address in the CPIM To header field.

An intermediary MUST remove any information about the final recipients of a list if the list membership is not disclosed. The intermediary does that by removing the <recipient-uri> element and/or <original-recipient-uri> element from the body of the IMDN before forwarding it to the IM Sender.



 TOC 

8.1.  Constructing Processing Notifications

Intermediaries are the only entities that construct processing notifications. They do so only if the IM Sender has requested a "processing" notification by including a Disposition-Notification header field with value "processing".

The intermediary can create and send "processing" notifications indicating that an IM has been processed or stored. The intermediary MUST NOT send more than one IMDN for the same disposition type. I.e., it must not send a "processing" notification indicating that an IM is being "processed" followed by another IMDN indicating that the same IM is "stored".

An intermediary constructs a "processing" notification in a similar fashion as the delivery notification. See Section 7.2.1.1 (Constructing Delivery Notifications) for details.

An example looks like the following:

Content-type: Message/CPIM

From: Bob <im:bob@example.com>
To: Alice <im:alice@example.com>
Content-type: message/imdn+xml
Content-Disposition: notification
Content-length: ...

<imdn>
   <message-id>34jk324j</message-id>
   <datetime>2006-04-04T12:16:49-05:00</datetime>
   <recipient-uri>im:bob@example.com</recipient-uri>
   <original-recipient-uri>
       im:bob@example.com
   </original-recipient-uri>
   <disposition>
      <processing/>
   </disposition>
   <status>
      <processed/>
   </status>
   <note lang="en">The IM has been processed</note>
</imdn>

There are situations where the intermediary cannot know the fate of an IM. The intermediary in this case generates a processing notification with a <status> value of "error" to indicate so.



 TOC 

8.2.  Aggregation of IMDNs

In this context, URI-List servers are defined as intermediaries.

An intermediary may choose to aggregate IMDNs using local policy for making such a decision or it may send individual IMDNs instead. When a URI-List server receives an IM and decides to aggregate IMDNs, it can wait for a configurable period of time or until all recipients have sent the IMDN, whichever comes first, before the URI-List server sends an aggregated IMDN. Note that some IMDNs, for example "read" notifications, may never come due to user settings. It is an administrator configuration and an implementation issue how long to wait before sending an aggregated IMDN and before a URI-List server removes state for that IM.

A URI-List server MAY choose to send multiple aggregated IMDNs. A timer can be started and when it fires, the URI-List server can aggregate whatever IMDNs it has so far for that IM, send the aggregated IMDN and restart the timer for the next batch. This is needed for scenarios where the IM Sender has requested more than one IMDN for a specific IM, for example, delivery notifications as well as read notifications, or when the URI-List server is short on resources and chooses to prioritise forwarding IMs over IMDNs.

A second timer can be running and when it fires, the state of the IM is deleted. In this case, the URI-List server consumes any IMDNs that might arrive after that time.

Please note the references to timers in the above paragraphs are not normative and are only present to help describe one way one might implement aggregation.

A URI-List server MAY aggregate IMDNs for the case where the list membership information is not disclosed. There may be scenarios where the URI-List server starts sending aggregated IMDNs and switch to individual ones or visa versa. A timer firing so often may in fact have that effect.

The aggregated IMDN is constructed using the multipart/mixed MIME type and including all the received IMDNs as message/imdn+xml as individual payloads.

Below is an example of aggregated IMDNs.

From: Bob <im:bob@example.com>
To: Alice <im:alice@example.com>
NS: imdn <urn:ietf:params:imdn>
imdn.Message-ID: d834jied93rf
Content-type: multipart/mixed;
                   boundary="imdn-boundary"
Content-Disposition: notification
Content-length: ...

--imdn-boundary
Content-type: message/imdn+xml

<?xml version="1.0" encoding="UTF-8"?>
<imdn xlmns="urn:ietf:params:xml:ns:imdn">
   <message-id>34jk324j</message-id>
   <datetime>2006-04-04T12:16:49-05:00</datetime>
   <recipient-uri>im:bob@example.com</recipient-uri>
   <original-recipient-uri>
       im:bob@example.com
   </original-recipient-uri>
   <disposition>
      <delivery/>
   </disposition>
   <status>
      <delivered/>
   </status>
   <note lang="en">The IM was successfully Delivered</note>
</imdn>

--imdn-boundary
Content-type: message/imdn+xml

<?xml version="1.0" encoding="UTF-8"?>
<imdn xlmns="urn:ietf:params:xml:ns:imdn">
   <message-id>34jk324j</message-id>
   <datetime>2006-04-04T12:16:49-05:00</datetime>
   <recipient-uri>im:bob@example.com</recipient-uri>
   <original-recipient-uri>
       im:bob@example.com
   </original-recipient-uri>
   <disposition>
      <read/>
   </disposition>
   <status>
      <read/>
   </status>
   <note lang="en">The IM was successfully Delivered</note>
</imdn>

--imdn-boundary



 TOC 

9.  Identifying Messages

Messages are typically carried in a transport protocol like SIP [RFC3261] (Rosenberg et al., J., Shulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, “SIP: Session Initiation Protocol,” June 2002.). If the payload carried by the transport protocol does not contain any parts of type Message/CPIM then the message is an IM. If the payload contains any parts of type Message/CPIM, and none of those parts contains a payload that is of type "message/imdn+xml", the message is an IM. It is not valid to attempt to carry both an IM and an IMDN in a multipart payload in a single transport protocol message.

A message is identified as a delivery notification by examining its contents. The message is a delivery notification if the Content-type header field present has a value of "message/imdn+xml", the Content-Disposition header field has a value of "notification", and the <disposition> element in that xml body has a sub-element <delivery>.

A message is identified as a processing notification or read notification in a similar fashion as a delivery notification. The difference is that the <disposition> element in that xml body has a sub-element of <processing> and <read> respectively.

Note a message of type multipart/mixed can be a notification if it includes a part of type message/imdn+xml.



 TOC 

10.  Header Fields Formal Syntax

The following syntax specification uses the message header field syntax as described in Section 3 of RFC3862 [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.).

Header field syntax is described without a namespace qualification. Following the rules in RFC3862 [RFC3862] (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.), header field names and other text are case sensitive and MUST be used as given, using exactly the indicated upper case and lower case letters.

Disposition-Notification =
    "Disposition-Notification" ": "
    [(notify-req *(COMMA notify-req))]

notify-req =
    ("negative-delivery" / "positive-delivery" /
     "processing" / "read" / Token) *(SEMI disp-notif-params)

disp-notify-params = generic-param

Message-ID = "Message-ID" ": " Token

Original-To = "Original-To" ": "  [ Formal-name ] "<" URI ">"

IMDN-Record-Route =
    "IMDN-Record-Route" ": "  [ Formal-name ] "<" URI ">"

IMDN-Route = "IMDN-Route" ": "  [ Formal-name ] "<" URI ">"



 TOC 

11.  IMDN Format



 TOC 

11.1.  Structure of XML-Encoded IMDN Payload

An IMDN Payload is an XML document [XML] (Bray, T., “Extensible Markup Language (XML) 1.0 (Second Edition),” October 2000.) that MUST be well-formed and MUST be valid according to schemas, including extension schemas, available to the validater and applicable to the XML document. The IMDN Payload MUST be based on XML 1.0 and MUST be encoded using UTF-8.

The namespace identifier for elements defined by this specification is a URN [URN] (Moats, R., “The URN Syntax,” May 1997.), using the namespace identifier 'ietf' defined by [URN_NS] (Moats, R., “The URN Namespace for IETF Documents,” August 1999.) and extended by [IANA] (Mealling, M., “The IETF XML Registry,” January 2004.). This urn is: urn:ietf:params:xml:ns:imdn.

This namespace declaration indicates the namespace on which the IMDN is based.

The root element is <imdn>. The <imdn> element has sub-elements, namely <message-id>, <datetime>, <recipient-uri>, <original-recipient-uri>, <subject>, <disposition>, <status>, and <note>. Those elements are described in details in the following sections.

<disposition> and <status> can be extended in the future to include new sub-elements not defined in this document. Those new elements MUST be defined in an RFC.



 TOC 

11.1.1.  The <message-id> Element

The <message-id> element is mandatory according to the XML schema and carries the message id that appeared in the Message-ID header field of the IM.



 TOC 

11.1.2.  The <datetime> Element

The <datetime> element is mandatory and carries the date and time the IM was sent (not the IMDN). This information is obtained from the DateTime header field of the IM.



 TOC 

11.1.3.  The <recipient-uri> Element

The <recipient-uri> element is optional and carries the URI of the final recipient. This information is obtained from the CPIM To header field of the IM.



 TOC 

11.1.4.  The <original-recipient-uri> Element

The <original-recipient-uri> element is optional and carries the URI of the original recipient. It MUST be present if the IM carried the Original-To header field. This information is obtained from the Original-To header field of the IM.



 TOC 

11.1.5.  The <subject> Element

The <subject> element is optional and carries the text that was in the Subject header field, if any. This allows for a human level correlation between an IM and an IMDN.



 TOC 

11.1.6.  The <disposition> Element

The <disposition> element is mandatory and carries the disposition type that the IM Sender requested and is being reported. It can carry one of the sub-elements <delivery>, <processing>, <read> or any other future extension.



 TOC 

11.1.7.  The <status> Element

The <status> element is mandatory and carries the result of the disposition request in the <disposition> element. For disposition type <delivery>, it can carry one of the sub-elements <delivered>, <failed>, <forbidden> or <error>. For disposition type <read>, it can carry one of the sub-elements <read>, <forbidden> or <error>. For disposition type <processing>, it can carry one of the sub-elements <processed>, <stored>, <forbidden> or <error>. <forbidden> means the disposition was denied. <error> means internal server error. It can also carry any other future extension.



 TOC 

11.1.8.  The <note> Element

The <note> element is optional and carries a human readable text. It has the "lang" attribute that indicates the language the text is written in.



 TOC 

11.2.  MIME Type for IMDN Payload

The MIME type for the IMDN Payload is "message/imdn+xml". The IMDN MUST identify the payload as MIME type "message/imdn+xml" in the Content-type header field.



 TOC 

11.3.  The RelaxNG Schema

<?xml version="1.0" encoding="UTF-8"?>
<grammar
  xmlns="http://relaxng.org/ns/structure/1.0"
  xmlns:a="http://relaxng.org/ns/compatibility/annotations/1.0"
  datatypeLibrary="http://www.w3.org/2001/XMLSchema-datatypes"
  ns="urn:ietf:params:xml:ns:imdn">

    <start>
        <element name="imdn">
            <element name="message-id">
                <data type="token"/>
            </element>
            <element name="datetime">
                <data type="string"/>
            </element>
            <optional>
                <element name="recipient-uri">
                    <data type="anyURI"/>
                </element>
                <element name="original-recipient-uri">
                    <data type="anyURI"/>
                </element>
                <element name="subject">
                    <data type="string"/>
                </element>
            </optional>
            <choice>
                <ref name="deliveryNotification"/>
                <ref name="readNotification"/>
                <ref name="processingNotification"/>
                <zeroOrMore>
                    <empty/>
                </zeroOrMore>
            </choice>
            <ref name="note"/>
            <zeroOrMore>
                <ref name="Extension"/>
            </zeroOrMore>
            <zeroOrMore>
                <ref name="anyIMDN"/>
            </zeroOrMore>
        </element>
    </start>

    <define name="deliveryNotification">
        <element name="disposition">
            <element name="delivery">
                <empty/>
            </element>
        </element>
        <element name="status">
            <choice>
                <element name="delivered">
                    <empty/>
                </element>
                <element name="failed">
                    <empty/>
                </element>
                <ref name="commonDispositionStatus"></ref>
                <zeroOrMore>
                    <ref name="Extension"/>
                </zeroOrMore>
                <zeroOrMore>
                    <ref name="anyIMDN"/>
                </zeroOrMore>
            </choice>
        </element>
    </define>

    <define name="readNotification">
        <element name="disposition">
            <element name="read">
                <empty/>
            </element>
        </element>
        <element name="status">
            <choice>
                <element name="read">
                    <empty/>
                </element>
                <ref name="commonDispositionStatus"></ref>
                <zeroOrMore>
                    <ref name="Extension"/>
                </zeroOrMore>
                <zeroOrMore>
                    <ref name="anyIMDN"/>
                </zeroOrMore>
            </choice>
        </element>
    </define>

    <define name="processingNotification">
        <element name="disposition">
            <element name="processing">
                <empty/>
            </element>
        </element>
        <element name="status">
            <choice>
                <element name="processed">
                    <empty/>
                </element>
                <element name="stored">
                    <empty/>
                </element>
                <ref name="commonDispositionStatus"></ref>
                <zeroOrMore>
                    <ref name="Extension"/>
                </zeroOrMore>
                <zeroOrMore>
                    <ref name="anyIMDN"/>
                </zeroOrMore>
            </choice>
        </element>
    </define>

    <define name="commonDispositionStatus">
        <choice>
            <element name="forbidden">
                <empty/>
            </element>
            <element name="error">
                <empty/>
            </element>
            <zeroOrMore>
                <ref name="Extension"/>
            </zeroOrMore>
            <zeroOrMore>
                <ref name="anyIMDN"/>
            </zeroOrMore>
        </choice>
    </define>

    <define name="note">
        <element name="note">
            <optional>
                <attribute>
                    <name ns="http://www.w3.org/XML/1998/namespace">
                        lang
                    </name>
                    <data type="language"/>
                </attribute>
            </optional>
            <data type="string"/>
        </element>
    </define>

    <define name="Extension">
        <empty/>
    </define>

    <define name="anyIMDN">
        <element>
            <anyName>
                <except>
                    <nsName ns="urn:ietf:params:xml:ns:imdn"/>
                    <nsName ns=""/>
                </except>
            </anyName>
            <mixed>
                <zeroOrMore>
                    <choice>
                        <attribute>
                            <anyName/>
                        </attribute>
                        <ref name="anyIMDN"/>
                    </choice>
                </zeroOrMore>
            </mixed>
        </element>
    </define>

</grammar>



 TOC 

12.  Transporting Messages using SIP



 TOC 

12.1.  Endpoint Behaviour



 TOC 

12.1.1.  Sending Requests

The IM Sender constructs a SIP MESSAGE request using RFC 3428 (Campbell, B., “SIP Extension for Instant Messaging,” December 2002.) [RFC3428]. The Content-type header field indicates the MIME type of the request payload. When using this extension, the Content-type header field MUST be of MIME type "message/cpim" (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) [RFC3862] for both IMs and IMDNs. The IM Sender constructs the payload according to Section 7 (Endpoint Behaviour).

The IM Sender constructs a SIP MESSAGE request to multiple recipients in a similar manner as a SIP MESSAGE request to a single recipient. Multiple-Recipient MESSAGE Requests in SIP (Garcia-Martin, M. and G. Camarillo, “Multiple-Recipient MESSAGE Requests in the Session Initiation Protocol (SIP),” December 2007.) [I‑D.ietf‑sip‑uri‑list‑message] describes the differences.

Due to the fact that IM senders can remain anonymous, e.g., by setting the SIP From header field of the SIP message to an anonymous URI, anonymous IM senders are cannot request disposition notifications. Therefore, anonymous IM senders SHOULD NOT request disposition notifications. An IM Recipient can ignore such request if the IM Sender is anonymous.



 TOC 

12.1.2.  Sending Responses

An endpoint receiving a SIP MESSAGE request constructs a SIP response according to RFC3428 [RFC3428] (Campbell, B., “SIP Extension for Instant Messaging,” December 2002.). Of course, an endpoint will send a response to the MESSAGE request regardless of the type of message (IM or IMDN) is has received, or the disposition type it has been asked for.



 TOC 

12.1.3.  Receiving Requests



 TOC 

12.1.3.1.  Instant Message

A SIP MESSAGE request is identified as an IM by examining its contents according to Section 9 (Identifying Messages).

If an IM Recipient received a SIP MESSAGE request that is an IM that requested a positive-delivery notification, and that IM Recipient has constructed and sent a SIP 2xx class response, it MAY generate a positive-delivery notification after making sure that the IM has been delivered to the user or application. A gateway, for example, can generate a 2xx response before the final recipient received the IM. The IM Recipient constructs a positive-delivery notification according to Section 7.2.1.1 (Constructing Delivery Notifications). The IM Recipient places the message as the payload in a SIP MESSAGE request.

If an IM Recipient received a SIP MESSAGE request that is an IM that requested a negative-delivery, and that IM Recipient has constructed and sent a 2xx class response, it SHOULD generate a negative-delivery notification if it learnt that the final recipient or application did not receive the IM (a gateway, for example, can generate a 2xx response before it has an error response from downstream or before any internal timers fire waiting for a response). The negative-delivery notification is constructed according to Section 7.2.1.1 (Constructing Delivery Notifications). The message is then placed as the payload in a SIP MESSAGE request.

If an IM Recipient received a SIP MESSAGE request that is an IM that requested a negative-delivery notification, and the IM Recipient has constructed and sent an non-2xx final response, it MUST NOT generate a negative-delivery notification.

If an IM Recipient received a SIP MESSAGE request that is an IM that requested a read notification, and that IM Recipient has constructed and sent a SIP 2xx class response, it MAY generate a read notification after making sure that the IM has been presented to the user or application. It is outside the scope of this document how such determination can be made. Note that the option to send a read notification or not can be left to the user. An application may allow a user to configure such choice. The IM Recipient constructs the read notification according to Section 7.2.1.2 (Constructing Read Notifications). The IM Recipient places the message as the payload in a SIP MESSAGE request.

For IMDNs, the IM Recipient populates the SIP Request-URI and the SIP To header field using the address that appeared in the SIP From header field in the IM.



 TOC 

12.1.3.2.  Delivery Notification

A SIP MESSAGE request is identified as delivery notification by examining its contents according to Section 9 (Identifying Messages).



 TOC 

12.1.3.3.  Read Notification

A SIP MESSAGE request is identified as read notification by examining its contents according to Section 9 (Identifying Messages).



 TOC 

12.2.  Intermediary Behaviour

In this context, intermediaries include application servers, including URI-List servers, store-and-forward servers, and gateways. SIP Proxies MUST NOT generate IMDNs but MUST forward them like any other SIP request.

Intermediaries forward a SIP MESSAGE request to multiple recipients according to [I‑D.ietf‑sip‑uri‑list‑message] (Garcia-Martin, M. and G. Camarillo, “Multiple-Recipient MESSAGE Requests in the Session Initiation Protocol (SIP),” December 2007.).

If an intermediary receives a SIP 2xx class response to a SIP MESSAGE request that is an IM, it examines if the body is of type "message/cpim". If so, it checks the CPIM header to see if there is the header field Disposition-Notification with a value "positive-delivery" and/or "negative-delivery". If so, it MUST send a delivery notification after receiving a transactional final response for the IM.

If the Disposition-Notification header field contains a value of "positive-delivery", the intermediary MUST NOT generate a delivery notification if it receives a SIP 2xx class response for the sent IM. This is in anticipation of a failure downstream after a 2xx response has been generated.

If the Disposition-Notification header field contains a value of "negative-delivery", the intermediary SHOULD generate a delivery notification if it receives a SIP 4xx, 5xx or 6xx class final response for the sent IM. If it has received a SIP 2xx class response followed by a negative-delivery notification, the intermediary forwards that negative-delivery notification or aggregates it.

If the Disposition-Notification header field contains a value of "processing", the intermediary MAY generate a processing notification after it has forwarded or stored the IM. The rest of the procedures in Section 8.1 (Constructing Processing Notifications) apply.

The procedure for generating such IMDN is the same as that of an IM Recipient (Section 7.2.1.1 (Constructing Delivery Notifications)).

The <recipient-uri> element of the XML body is populated with the URI of the IM Recipient.

If an intermediary receives a SIP MESSAGE request carrying a positive delivery notification or a read notification, it forwards it using the rules in Section 8 (Intermediary Behaviour).



 TOC 

13.  Transporting Messages using MSRP

MSRP already provides a built-in mechanism to supply positive and negative delivery reports.

While MSRP does not provide a built-in Read or Processing notification dispositions, those are generally not considered as useful information for session IM. This is because the assumption behind MSRP is that SEND requests do not reach a mailbox where incoming IMs have to be open, but to an application that renders sequentially those incoming IMs, providing the session experience. This kind of applications has no means of identifying when a user has read the IM and therefore cannot be useful information for the sender.

IMDN use cases for MSRP have not been fully explored. If new requirements arise in the future determining the need for IMDN in MSRP, new specifications can be drafted.



 TOC 

14.  Security Considerations

IMDNs provide a fine-grained view of the activity of the IM Recipient and thus deserves particularly careful confidentiality protection so that only the intended recipient of the IMDN will receive the IMDN. In most cases, the intended recipient of the IMDN is the IM Sender.

Since the IM transport protocol carries the IMDN, all security considerations of the underlying IM protocol also apply to the IMDNs.

The threats in the IMDN system, over and beyond the threats inherent to IM include the following:

The protocol cannot protect against attacks that include the following:

To combat eavesdropping, modification, and man-in-the-middle attacks, we require some level of authentication and integrity protections. That said, there are circumstances where strong integrity would be overkill. The presumption is the IM Sender has and sets the expectation for the level of protection. The procedures for integrity protection are as follows.

The IM Recipient or intermediary MUST be capable of accessing the IM Sender's public certificate in order to verify the signature in the IM.

CPIM security considerations (Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” August 2004.) [RFC3862] apply here as this is an extension of CPIM. In order to make the IMDN mechanism independent of the transport protocol, the Work Group made the design choice of putting routing information into the IMDN application layer payload. One consequence of this choice is it eliminates the possibility of having end-to-end encryption.

An attacker can mount a distributed denial of service attack on a node by sending lots of IMs to the node with IMDN requests. Note that this is the same problem as there is without IMDN; IMDN simply linearly increases the load on the node under attack. One can mitigate, but not eliminate this threat by the endpoint immediately ignoring requests that are not authenticated.

Likewise, an attacker can mount a denial of service attack on an intermediary by asking the intermediary to explode a large list.

The following security considerations apply when using IMDNs:



 TOC 

14.1.  Forgery

IMs can be forged. To protect against that, an IM can be signed. An intermediary that receives a signed message and needs to modify any part of it that is included in the signature (like adding an Original-To header field to the CPIM header fields), MUST consume the IM and create a new copy of it that the intermediary signs itself.

IMDNs may be forged as easily as ordinary IMs. Endpoints and intermediaries that wish to make automatic use of IMDNs should take appropriate precautions to minimize the potential damage from denial-of-service attacks. Security threats related to forged IMDNs include the sending of a falsified IMDN when the indicated disposition of the IM has not actually occurred. For example, read notification could be forged to indicate that a IM Recipient has read the IM. Unsolicited IMDNs is also another form of forgery.



 TOC 

14.2.  Confidentiality

There may be cases where an IM Recipient does not wish to reveal the information that he has received or in fact read the IM. In this situation, it is acceptable for the IM Recipient to silently ignore requests for an IMDN. It is strongly RECOMMENDED that the IM Recipient obtain the user's consent before sending an IMDN. Circumstances where the IM Recipient does not ask for the user's consent include IM systems that, for regulatory reasons, are required to issue an IMDN, such as in the health care field or financial community.

An IM Recipient can obtain such consent by a prompt or dialog box on a per-IM basis, globally through the user's setting of a preference, or other, user-configurable mechanism. The user might also indicate globally that IMDNs are never to be sent or that a "forbidden" IMDN status is always sent in response to a request for an IMDN.

There are situations where a user sends an IM and requests IMDNs to a list whose member information is not disclosed. In this situation, the user will learn of the list members. Therefore, in this case, the URI-List server MUST remove any information about list members. If the number of members in the list is also not disclosed, the URL-List server MUST only deliver one aggregated IMDN. Alternatively, the URI-list server MAY reject the IM.

It is possible for a list server to not understand IMDN. IM Recipients may note the To is a list name and not the IM Recipient's name. In this case, the IM Recipient can take the appropriate action if it wishes to keep its identity private.

An unencrypted IMDN could reveal confidential information about an encrypted IM. The same level of security applied to an IM MUST be applied to its IMDNs. For example, if an IM is signed and encrypted, and IMDN must also be signed and encrypted.



 TOC 

14.3.  Non-Repudiation

IMDNs cannot be relied on as a guarantee that an IM was or was not seen by the user. Even if IMDNs are not actively forged, they may be lost in transit. The IMDN issuing mechanism may be bypassed in some manner by the IM Recipient.



 TOC 

15.  IANA Considerations



 TOC 

15.1.  message/imdn+xml MIME TYPE

This document registers a new MIME type "message/imdn+xml", and registers a new XML namespace.

This specification follows the guidelines of RFC3023 [RFC3023] (Murata, M., “XML Media Types,” March 1997.).

MIME media type: message

MIME subtype name: imdn+xml

Mandatory parameters: none

Optional parameters: Same as charset parameter application/xml as specified in RFC 3023 [RFC3023] (Murata, M., “XML Media Types,” March 1997.).

Encoding considerations: Same as encoding considerations of application/xml as specified in RFC 3023 [RFC3023] (Murata, M., “XML Media Types,” March 1997.).

Security considerations: See section 10 of RFC 3023 [RFC3023] (Murata, M., “XML Media Types,” March 1997.) and Section 14 (Security Considerations) of this document.

Interoperability considerations: none.

Published specification: This document.

Applications which use this media type: This document type is used to support CPIM based instant messaging.

Additional information: None

Magic number: None

File extension: .cl or .xml

Macintosh file type code: "TEXT"

Personal and email address for further information: Hisham Khartabil (hisham.khartabil@gmail.com)

Intended Usage: COMMON

Author/change controller: The IETF .



 TOC 

15.2.  URN Sub-Namespace Registration for urn:ietf:params:xml:ns:imdn

This section registers a new XML namespace, as per guidelines in the IETF XML Registry [IANA] (Mealling, M., “The IETF XML Registry,” January 2004.).

URI: The URI for this namespace is urn:ietf:params:xml:ns:imdn.

Registrant Contact: IETF, SIMPLE working group, Hisham Khartabil (hisham.khartabil@gmail.com) .



 TOC 

15.3.  Schema Registration

This section registers a new XML schema per the procedures in [IANA] (Mealling, M., “The IETF XML Registry,” January 2004.).

URI: urn:ietf:params:xml:ns:imdn

Registrant Contact: IETF, SIMPLE working group, Hisham Khartabil (hisham.khartabil@gmail.com)

The XML for this schema can be found as the sole content of Section 11.3 (The RelaxNG Schema).



 TOC 

15.4.  Registration for urn:ietf:params:imdn

Registry name: imdn

Specification: RFC XXXX. Additional values may be defined by standards track RFCs that update or obsolete RFC XXXX (Specification Required).

Repository: http://www.iana.org/assignments/imdn

Index value: The index value is a CPIM message IMDN header name, which may consist of a sequence from a restricted set of US-ASCII characters, as defined above.

URN Formation: The URI for a header is formed from its name by:

a) replacing any non-URN characters (as defined by RFC 2141[URN] (Moats, R., “The URN Syntax,” May 1997.)) with the corresponding '%hh' escape sequence (per RFC 2396 [RFC2396] (Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” January 2005.)); and

b) prepending the resulting string with 'urn:ietf:params:imdn:'.



Thus, the URI corresponding to the CPIM message IMDN header 'Disposition-Notification:' would be 'urn:ietf:params:imdn:Disposition-Notification'.



 TOC 

15.5.  Message/CPIM Header Field Registration

This document registers the following message/cpim header fields in the imdn fields registry:

Disposition-Notification - [RFCXXXX]

Message-ID - [RFCXXXX]

Original-To - [RFCXXXX]

IMDN-Record-Route - [RFCXXXX]

IMDN-Route - [RFCXXXX]



 TOC 

15.6.  Content-Disposition: notification

This document registers one new Content-Disposition header field "disposition-types": notification. The authors request that this value be recorded in the IANA registry for Content-Dispositions.

Descriptions of this "disposition-types", including motivation and examples, are given in Section 7.2.1.1 (Constructing Delivery Notifications) and Section 9 (Identifying Messages).

Short descriptions suitable for the IANA registry are:

notification the body of the message is a notification according to an earlier request for a disposition notification to an instant message



 TOC 

16.  Acknowledgements

The authors would like to thank Paul Kyzivat, Ben Campbell, Adam Roach, Gonzalo Camarillo, Sean Olson, Eva Leppanen, Miguel Garcia, Eric McMurry, Jari Urpalainen, Jon Peterson, and Robert Sparks for their comments and support.



 TOC 

17.  References



 TOC 

17.1. Normative References

[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997.
[RFC3862] Klyne, G. and D. Atkins, “Common Presence and Instant Messaging (CPIM): Message Format,” RFC 3862, August 2004.
[IANA] Mealling, M., “The IETF XML Registry,” RFC 3688, January 2004.
[URN] Moats, R., “The URN Syntax,” RFC 2141, May 1997.
[RFC3023] Murata, M., “XML Media Types,” RFC 3023, March 1997.
[XML] Bray, T., “Extensible Markup Language (XML) 1.0 (Second Edition),”  W3C CR CR-xml11-20011006, October 2000.
[RFC2396] Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax,” STD 66, RFC 3986, January 2005 (TXT, HTML, XML).


 TOC 

17.2. Informative References

[RFC3261] Rosenberg et al., J., Shulzrinne, H., Camarillo, G., Johnston, A., Peterson, J., Sparks, R., Handley, M., and E. Schooler, “SIP: Session Initiation Protocol,” RFC 3261, June 2002.
[RFC3428] Campbell, B., “SIP Extension for Instant Messaging,” RFC 3428, December 2002.
[RFC2821] Klensin, J., “Simple Mail Transfer Protocol,” RFC 2821, April 2001.
[RFC3798] Hansen, T. and G. Vaudreuil, “Message Disposition Notification,” RFC 3798, May 2004.
[URN_NS] Moats, R., “The URN Namespace for IETF Documents,” RFC 2648, August 1999.
[I-D.ietf-sip-uri-list-message] Garcia-Martin, M. and G. Camarillo, “Multiple-Recipient MESSAGE Requests in the Session Initiation Protocol (SIP),” draft-ietf-sip-uri-list-message-03 (work in progress), December 2007 (TXT).


 TOC 

Authors' Addresses

  Eric Burger
  BEA Systems, Inc.
  4 Van de Graaff Dr.
  Burlington, MA 01803
  USA
Phone:  +1 781 993 7437
Fax:  +1 603 457 5933
Email:  eric.burger@bea.com
  
  Hisham Khartabil
  Melbourne
  Australia
Phone:  +61 416 108 890
Email:  hisham.khartabil@gmail.com


 TOC 

Full Copyright Statement

Intellectual Property