Internet-Draft | SCIM Device Schema Extensions | August 2024 |
Shahzad, et al. | Expires 13 February 2025 | [Page] |
The initial core schema for SCIM (System for Cross Identity Management) was designed for provisioning users. This memo specifies schema extensions that enables provisioning of devices, using various underlying bootstrapping systems, such as Wifi EasyConnect, FIDO device onboarding vouchers, BLE passcodes, and MAC authenticated bypass.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 13 February 2025.¶
Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
The Internet of Things presents a management challenge in many dimensions. One of them is the ability to onboard and manage large number of devices. There are many models for bootstrapping trust between devices and network deployments. Indeed it is expected that different manufacturers will make use of different methods.¶
SCIM (System for Cross Identity Management) [RFC7643] [RFC7644] defines a protocol and a schema for provisioning of users. However, it can easily be extended to provision devices. The protocol and core schema were designed to permit just such extensions. Bulk operations are supported. This is good because often devices are procured in bulk.¶
Some might ask why SCIM is well suited for this purpose and not, for example, NETCONF or RESTCONF with YANG. After all, there are all sorts of existing models available. The answer is that the only information being passed about the device is neither state nor device configuration information, but only information necessary to bootstrap trust so that the device may establish connectivity.¶
In the normal SCIM model, it was presumed that large federated deployments would be SCIM clients who provision and remove employees and contractors as they are enter and depart those deployments, and federated services such as sales, payment, or conferencing services would be the servers.¶
In the device model, the roles are reversed, and may be somewhat more varied. A deployment network management system gateway (NMS gateway) plays the role of the server, receiving information about devices that are expected to be connected to its network. That server will apply appropriate local policies regarding whether/how the device should be connected.¶
The client may be one of a number of entities:¶
A vendor who is authorized to add devices to a network as part of a sales transaction. This is similar to the sales integration sometimes envisioned by Bootstrapping Remote Key Infrastructure (BRSKI) [RFC8995].¶
A client application that administrators or employees use to add, remove, or get information about devices. An example might be an tablet or phone app that scans Easyconnect QR codes.¶
In Figure 1, the onboarding app provides the device particulars. As part of the response, the SCIM server might provide additional information, especially in the case of non-IP devices, where an application-layer gateway may need to be used to communicate with the device. The control endpoint is one among a number of objects that may be returned.¶
RFC 7643 does not prescribe a language to describe a schema. We have chosen the JSON schema language [I-D.bhutton-json-schema] for this purpose. The use of XML for this SCIM devices is not supported.¶
Several additional schemas specify specific onboarding mechanisms, such as BLE and Wifi Easy Connect.¶
Attributes defined in the device core schema and extensions comprise characteristics and SCIM datatypes defined in Sections 2.2 and 2.3 of the [RFC7643]. This specifciation does not define new characteristics and datatypes for the SCIM attributes.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
A new resource type 'Device' is specified. The "ResourceType" schema specifies the metadata about a resource type (see section 6 of [RFC7643]). The resource "Devices" comprises a core device schema and several extension schemas. The core schema provides a minimal resource representation, whereas extension schemas extend the core schema depending on the device's capability. The JSON schema for Device resource type is in Section 8.1.¶
The Device schema contains three common attributes as defined in the [RFC7643].¶
id¶
An id is a required and unique attribute of the device core schema (see section 3.1 of [RFC7643]).¶
externalID¶
An externalID is an optional attribute (see section 3.1 of [RFC7643]).¶
meta¶
Meta is a complex attribute and is required (see section 3.1 of [RFC7643]).¶
The core device schema provides the minimal representation of a resource "Device". It contains only those attributes that any device may need, and only one attribute is required. The core schema for "Device" is identified using the schema URI: "urn:ietf:params:scim:schemas:core:2.0:Device". The following attributes are defined in the device core schema.¶
displayName¶
This attribute is of type "string" and provides a human-readable name for a device. It is intended to be displayed to end-users and should be suitable for that purpose. The attribute is not required, and is not case-sensitive. It may be modified and SHOULD be returned by default. No uniqueness constraints are imposed on this attribute.¶
active¶
The "active" attribute is of type "boolean" and is a mutable attribute, and is required. If set to TRUE, it means that this device is intended to be operational. Attempts to control or access a device where this value is set to FALSE may fail. For example, when used in conjunction with NIPC [I-D.brinckman-nipc], commands such as connect, disconnect, subscribe that control app sends to the controller for the devices any command coming from the control app for the device will be rejected by the controller.¶
mudUrl¶
The mudUrl attribute represents the URL to the MUD file associated with this device. This attribute is optional and mutable. The mudUrl value is case sensitive and not unique. When present, this attribute may be used as described in [RFC8520]. This attribute is case sensitive and returned by default.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
displayName | F | F | F | RW | Def | None |
active | F | T | F | RW | Def | None |
mudUrl | F | F | T | RW | Def | None |
An example of a device SCIM object is as follows:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "BLE Heart Monitor", "active": true, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f -4109-8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the device is presented in JSON format in Section Section 8.2, while the openAPI representation is provided in Section Appendix B.1.¶
Device groups are created using the SCIM groups as defined in [RFC7643] Section 4.2.¶
This section defines a new resource type, 'EndpointApp'. The "ResourceType" schema specifies the metadata about a resource type (see section 6 of [RFC7643]). The resource "EndpointApp" represents client applications that can control and/or receive data from the devices. The JSON schema for EndpointApp resource type is in Section 8.1.¶
The attributes comprising EndpointsApp are listed in Section 6. The "EndpointApp" are included in the endpoint applications extension ("endpointAppsExt") Section 7.6.¶
The schema for "EndpointApp" is identified using the schema URI: "urn:ietf:params:scim:schemas:core:2.0:EndpointApp". The following attributes are defined in this schema.¶
The EndpointApp schema contains three common attributes as defined in the [RFC7643].¶
applicationType¶
This attribute is of type "string" and represents the type of application. It will only contain two values; 'deviceControl' or 'telemetry'. 'deviceControl' is the application that sends commands to control the device. 'telemetry' is the application that receives data from the device. The attribute is required, and is not case-sensitive. The is attribute readOnly and should be returned by default. No uniqueness constraints are imposed on this attribute.¶
applicationName¶
The "applicationName" attribute is of type "string" and represents a human readable name for the application. This attribute is required and mutable. The attribute should be returned by default and there is no uniqueness contraint on the attribute.¶
clientToken¶
This attribute type string contains a token that the client will use to authenticate itself. Each token may be a string up to 500 characters in length. It is mutable, required, case sensitive and returned by default if it exists.¶
certificateInfo¶
It is the complex attribute that Contains x509 certificate's subject name and root CA information associated with the device control or telemetry app. It further has three attributes that are described below.¶
rootCN¶
It is the root certificate common name. This attribute is required, read only, singular and case sensitive.¶
subjectName¶
Also known as the Common Name (CN), the Subject Name is a field in the X.509 certificate that identifies the primary domain or IP address for which the certificate is issued. This attribute is not required, read only, singular and case sensitive.¶
subjectAlternativeName¶
This attribute allows for the inclusion of multiple domain names and IP addresses in a single certificate. This enables the certificate to be used for multiple related domains or IPs without the need for separate certificates for each. This attribute is not required, read only, multivalued and case sensitive.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
applicationType | F | T | F | R | Def | None |
applicationName | F | T | F | RW | Def | None |
clientToken | F | T | T | R | Def | None |
certificateInfo | F | F | F | RW | Def | None |
rootCN | F | T | T | R | Def | None |
subjectName | F | F | T | R | Def | None |
subjectAltName | T | F | T | R | Def | None |
Note that attributes clientToken and certificateInfo are used for the authentication of the application. Both SHALL NOT exist together in the SCIM object. Either clientToken or certificateInfo SHALL be present in the SCIM object.¶
An example of a endpointApp SCIM object is as follows. Note that since certificateInfo is present in the example, clientToken attribute is NULL.¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:EndpointApp"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316212", "applicationType": "deviceControl", "applicationName": "Device Control App 1", "certificateInfo": { "rootCN": "DigiCert Global Root CA", "subjectName": "wwww.example.com", "subjectAlternativeName": ["xyz.example.com", "abc.example.com"] }, "clientToken": null, "meta": { "resourceType": "EndpointApp", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/EndpointApp/e9e30dba-f08f -4109-8486-d5c6a3316212" } } <CODE ENDS>¶
The schema for the endpointApp is presented in JSON format in Section Section 8.3, while the openAPI representation is provided in Section Appendix B.2.¶
SCIM provides various extension schemas, their attributes, JSON representation, and example object. The core schema is extended with a new resource type, as described in Section 8.1. No schemaExtensions list is specified in that definition. Instead, an IANA registry is created, where all values for "required" are set to false. All extensions involving Devices MUST be registered via IANA, as described in Section 10.2. The schemas below demonstrate how this model is to work.¶
This schema extends the device schema to represent the devices supporting BLE. The extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:ble:2.0:Device¶
The attributes are as follows:¶
deviceMacAddress¶
A string value that represent a public MAC address assigned by the manufacturer. It is a unique 48-bit value. Ir is required, case insensitive, and it is mutable and return as default. The regex pattern is the following:¶
^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}$¶
isRandom¶
A boolean flag taken from the BLE core specification, 5.3. If FALSE, the device is using a public MAC address. If TRUE, the device uses a Random address resolved using IRK. This attribute is not required, it is mutable, and returned by default. Its default value is FALSE.¶
separateBroadcastAddress¶
When present, this address is used for broadcasts/advertisements. This value MUST NOT be set when an IRK is provided. Its form is the same as deviceMacAddress. It is not required, multivalued, mutable, and returned by default.¶
irk¶
A string value, Identity resolving key, which is unique for every device. It is used to resolve the random address. It is required when isRandom is TRUE. It is mutable and return by default.¶
mobility¶
A boolean attribute to enable mobility on BLE device. If set to True, the BLE device will automatically connect to the closest AP. For example, BLE device is connected with AP-1 and moves out of range but comes in range of AP-2, it will be disconnected with AP-1 and connects with AP-2. It is returned by default and mutable.¶
versionSupport¶
A multivalued attribute that provides all the BLE versions supported by the device in the form of an array. For example, [4.1, 4.2, 5.0, 5.1, 5.2, 5.3]. It is required, mutable, and return as default.¶
pairingMethods¶
An array of pairing methods associated with the BLE device. The pairing methods may require sub-attributes, such as key/password, for the device pairing process. To enable the scalability of pairing methods in the future, they are represented as extensions to incorporate various attributes that are part of the respective pairing process. Pairing method extensions are nested inside the BLE extension. It is required, case sensitive, mutable, and returned by default.¶
The details on pairing methods and their associated attributes are in section 2.3 of [BLE53]. This memo defines extensions for four pairing methods that are nested insided the BLE extension schema. Each extension contains the common attributes Section 2.1. These extension are are as follows.¶
(i) pairingNull extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:pairingNull:2.0:Device¶
pairingNull does not have any attribute. It allows pairing for BLE devices that do not require a pairing method.¶
(ii) pairingJustWorks extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0:Device¶
Just works pairing method does not require a key to pair devices. For completeness, the key attribute is included and is set to 'null'. Key attribute is required, immutable, and return by default.¶
(iii) pairingPassKey extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0:Device¶
The pass key pairing method requires a 6-digit key to pair devices. This extension has one singular integer attribute, "key", which is required, mutable and returned by default. The key pattern is as follows:¶
^[0-9]{6}$¶
(iv) pairingOOB extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device¶
The out-of-band pairing method includes three singular attributes, i.e., key, randomNumber, and confirmationNumber.¶
key The key is string value, required and received from out-of-bond sources such as NFC. It is case sensitive, mutable, and returned by default.¶
randomNumber It represents a nounce added to the key. It is and integer value that is required attribute. It is mutable and returned by default.¶
confirmationNumber An integer which some solutions require in RESTful message exchange. It is not required. It is mutable and returned by default if it exists.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
deviceMacAddress | F | T | F | RW | Def | Manuf |
isRandom | F | T | F | RW | Def | None |
sepBroadcastAdd | T | T | F | RW | Def | None |
irk | F | F | F | RW | Def | Manuf |
versionSupport | T | T | F | RW | Def | None |
mobility | F | F | F | RW | Def | None |
pairingMethods | T | T | T | RW | Def | None |
An example of a device object with BLE extension is as follows:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "BLE Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : { "versionSupport": ["5.3"], "deviceMacAddress": "2C:54:91:88:C9:E2", "isRandom": false, "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77 :22:12"], "mobility": true, "pairingMethods": ["urn:ietf:params:scim:schemas:extension :pairingPassKey:2.0:Device"], "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0 :Device" : { "key": 123456 } }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
In the above example, the pairing method is "pairingPassKey", which implies that this BLE device pairs using only a passkey. In another example below, the pairing method is "pairingOOB," implying that this BLE device uses the out-of-band pairing method.¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "BLE Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : { "versionSupport": ["5.3"], "deviceMacAddress": "2C:54:91:88:C9:E2", "isRandom": false, "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77 :22:12"], "mobility": true, "pairingMethods": ["urn:ietf:params:scim:schemas:extension :pairingOOB:2.0:Device"], "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": { "key": "TheKeyvalueRetrievedFromOOB", "randNumber": 238796813516896 } }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
However, a device can have more than one pairing method. Support for multiple pairing methods is also provided by the multi-valued attribute pairingMethods. In the example below, the BLE device can pair with both passkey and OOB pairing methods.¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:ble:2.0:Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "BLE Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : { "versionSupport": ["5.3"], "deviceMacAddress": "2C:54:91:88:C9:E2", "isRandom": false, "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77 :22:12"], "mobility": true, "pairingMethods": ["urn:ietf:params:scim:schemas:extension :pairingPassKey:2.0:Device", "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0 :Device"], "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0 :Device" : { "key": 123456 }, "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": { "key": "TheKeyvalueRetrievedFromOOB", "randNumber": 238796813516896 } }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the BLE extension is presented in JSON format in Section Section 8.4, while the openAPI representation is provided in Section Appendix B.3.¶
A schema that extends the device schema to enable WiFi EasyConnect (otherwise known as Device Provisioning Protocol or DPP). The extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:dpp:2.0:Device¶
The attributes in this extension are adopted from [DPP2]. The attributes are as follows:¶
dppVersion¶
An integer that represents the version of DPP the device supports. This attribute is required, case insensitive, mutable, and returned by default.¶
bootstrapKey¶
A string value representing Elliptic-Curve Diffie–Hellman (ECDH) public key. The base64 encoded lengths for P-256, P-384, and P-521 are 80, 96, and 120 characters. This attribute is required, case-sensitive, mutable, and returned by default.¶
deviceMacAddress¶
The manufacturer assigns the MAC address stored as string. It is a unique 48-bit value. This attribute is optional, case insensitive, mutable, and returned by default. The regex pattern is as follows:¶
^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}$¶
serialNumber¶
An alphanumeric serial number, stored as string, may also be passed as bootstrapping information. This attribute is optional, case insensitive, mutable, and returned by default.¶
bootstrappingMethod¶
It is the array of strings of all the bootstrapping methods available on the enrollee device. For example, [QR, NFC]. This attribute is optional, case insensitive, mutable, and returned by default.¶
classChannel¶
This attribute is an array of strings of global operating class and channel shared as bootstrapping information. It is formatted as class/channel. For example, ['81/1','115/36']. This attribute is optional, case insensitive, mutable, and returned by default.¶
An example of a device object with DPP extension is below:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:dpp:2.0 :Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "WiFi Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:dpp:2.0:Device" : { "dppVersion": 2, "bootstrappingMethod": ["QR"], "bootstrapKey": "MDkwEwYHKoZIzj0CAQYIKoZIzj0DAQcDIgADURzxmt tZoIRIPWGoQMV00XHWCAQIhXruVWOz0NjlkIA=", "deviceMacAddress": "2C:54:91:88:C9:F2", "classChannel": ["81/1", "115/36"], "serialNumber": "4774LH2b4044" }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f -4109-8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the DPP extension is presented in JSON format in Section Section 8.5, while the openAPI representation is provided in Section Appendix B.4.¶
This extension enables a legacy means of (very) weak authentication, known as MAC Authenticated Bypass (MAB), that is supported in many wired ethernet solutions. If the MAC address is known, then the device may be permitted (perhaps limited) access. The extension is identified by the following URI:¶
urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device¶
This extension has a singular attribute:¶
deviceMacAddress¶
This is the Ethernet address to be provisioned onto the network. It takes the identical form as found in both the BLE and DPP extensions.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
deviceMacAddress | F | T | F | RW | Def | None |
An example of a device object with EthernetMAB extension is shown below:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0 :Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "Some random Ethernet Device", "active": true, "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0:Device" : { "deviceMacAddress": "2C:54:91:88:C9:E2" }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the EthernetMAB extension is presented in JSON format in Section Section 8.6, while the openAPI representation is provided in Section Appendix B.5.¶
This extension specifies a voucher to be used by a Fido Device Onboarding (FDO) owner process [FDO11], so that a trusted introduction can be made using that mechanism.¶
urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0:Device¶
This extension has a singular attribute:¶
fdoVoucher¶
The voucher is formated as a PEM-encoded object in accordance with the FDO specification (citation needed).¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
fdoVoucher | F | T | F | RW | Def | None |
An example of a device object with FDO extension is shown below:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Devices", "urn:ietf:params:scim:schemas:extension:fido-device-onboard :2.0:Devices"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "Some random Ethernet Device", "active": true, "urn:ietf:params:scim:schemas:extension:fido-device-onboard:2.0 :Devices" : { "fdoVoucher": "{... voucher ...}" }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the FDO extension is presented in JSON format in Section Section 8.7, while the openAPI representation is provided in Section Appendix B.6.¶
A schema that extends the device schema to enable the provisioning of Zigbee devices. The extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device¶
It has one singular attribute and one multivalued attribute. The attributes are as follows:¶
deviceEui64Address¶
An EUI-64 (Extended Unique Identifier) device address stored as string. This attribute is required, case insensitive, mutable, and returned by default. The regex pattern is as follows:¶
^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){7}$¶
versionSupport¶
An array of strings of all the Zigbee versions supported by the device. For example, [3.0]. This attribute is required, case insensitive, mutable, and returned by default.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
deviceEui64Address | F | T | F | RW | Def | None |
versionSupport | T | T | F | RW | Def | None |
An example of a device object with Zigbee extension is shown below:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "Zigbee Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device" : { "versionSupport": ["3.0"], "deviceEui64Address": "50:32:5F:FF:FE:E7:67:28" }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the Zigbee extension is presented in JSON format in Section Section 8.8, while the openAPI representation is provided in Section Appendix B.7.¶
Sometimes non-IP devices such as those using BLE or Zigbee require an application gateway interface to manage them. SCIM clients MUST NOT specify this to describe native IP-based devices.¶
endpointAppsExt provides the list application that connect to enterprise gateway. The endpointAppsExt has one multivalued attribute and two singular attributes. The extension is identified using the following schema URI:¶
urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0:Device¶
deviceControlEnterpriseEndpoint¶
Device control apps use this URL of the enterprise endpoint to reach the enterprise gateway. When the enterprise receives the SCIM object from the onboarding app, it adds this attribute to it and sends it back as a response to the onboarding app. This attribute is required, case-sensitive, mutable, and returned by default. The uniqueness is enforced by the enterprise.¶
telemetryEnterpriseEndpoint¶
Telemetry apps use this URL of the enterprise endpoint to reach the enterprise gateway. When the enterprise receives the SCIM object from the onboarding app, it adds this attribute to it and sends it back as a response to the onboarding app. This attribute is required, case-sensitive, mutable, and returned by default. The uniqueness is enforced by the enterprise.¶
applications¶
This is a complex multivalued attribute. It represents a list of endpoint applications i.e., deviceControl and telemetry. Each entry in the list comprises two attributes including "value" and "$ref".¶
value¶
It is the identifier of the endpoint application formated as UUID. It is same as the common attribute "$id" of the resource "endpointApp". It is readOnly, required, case insensitive and returned by default.¶
$ref¶
It is the reference to the respective endpointApp resource object stored in the SCIM server. It is readOnly, required, case sensitive and returned by default.¶
Attribute | Multi Value | Req | Case Exact | Mutable | Return | Unique |
---|---|---|---|---|---|---|
devContEntEndpoint | F | T | T | R | Def | Ent |
telEntEndpoint | F | T | T | R | Def | Ent |
applications | T | T | F | RW | Def | None |
value | F | T | F | R | Def | None |
$ref | F | T | F | R | Def | None |
An example of a device object with endpointAppsExt extension is below:¶
<CODE BEGINS> { "schemas": ["urn:ietf:params:scim:schemas:core:2.0:Device", "urn:ietf:params:scim:schemas:extension:ble:2.0:Device", "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0 :Device"], "id": "e9e30dba-f08f-4109-8486-d5c6a3316111", "displayName": "BLE Heart Monitor", "active": true, "urn:ietf:params:scim:schemas:extension:ble:2.0:Device" : { "versionSupport": ["5.3"], "deviceMacAddress": "2C:54:91:88:C9:E2", "isRandom": false, "separateBroadcastAddress": ["AA:BB:88:77:22:11", "AA:BB:88:77 :22:12"], "mobility": false, "pairingMethods": [ "urn:ietf:params:scim:schemas:extension:pairingNull:2.0 :Device", "urn:ietf:params:scim:schemas:extension:pairingJustWorks :2.0:Device", "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0 :Device", "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0 :Device"], "urn:ietf:params:scim:schemas:extension:pairingNull:2.0:Device" : null, "urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0 :Device": { "key": null }, "urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0 :Device" : { "key": 123456 }, "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0:Device": { "key": "TheKeyvalueRetrievedFromOOB", "randNumber": 238796813516896 } }, "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0 :Device": { "applications": [ { "value" : "e9e30dba-f08f-4109-8486-d5c6a3316212", "$ref" : "https://example.com/v2/EndpointApp/e9e30dba-f08f -4109-8486-d5c6a3316212" }, { "value" : "e9e30dba-f08f-4109-8486-d5c6a3316333", "$ref" : "https://example.com/v2/EndpointApp/e9e30dba-f08f -4109-8486-d5c6a3316333" } ], "deviceControlEnterpriseEndpoint": "https ://enterprise.com/device_control_app_endpoint/", "telemetryEnterpriseEndpoint": "https ://enterprise.com/telemetry_app_endpoint/" }, "meta": { "resourceType": "Device", "created": "2022-01-23T04:56:22Z", "lastModified": "2022-05-13T04:42:34Z", "version": "W\/\"a330bc54f0671c9\"", "location": "https://example.com/v2/Device/e9e30dba-f08f-4109 -8486-d5c6a3316111" } } <CODE ENDS>¶
The schema for the endpointAppsExt extension along with BLE extension is presented in JSON format in Section Section 8.9, while the openAPI representation is provided in Section Appendix B.8.¶
<CODE BEGINS> [ { "schemas": ["urn:ietf:params:scim:schemas:core:2.0 :ResourceType"], "id": "Device", "name": "Device", "endpoint": "/Devices", "description": "Device Account", "schema": "urn:ietf:params:scim:schemas:core:2.0:Device", "meta": { "location": "https://example.com/v2/ResourceTypes/Device", "resourceType": "ResourceType" } }, { "schemas": ["urn:ietf:params:scim:schemas:core:2.0 :ResourceType"], "id": "EndpointApp", "name": "EndpointApp", "endpoint": "/EndpointApp", "description": "Endpoint application such as device control and telemetry.", "schema": "urn:ietf:params:scim:schemas:core:2.0:EndpointApp", "meta": { "location": "https ://example.com/v2/ResourceTypes/EndpointApp", "resourceType": "ResourceType" } } ] <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:core:2.0:Device", "name": "Device", "description": "Device account", "attributes" : [ { "name": "displayName", "type": "string", "description": "Human readable name of the device, suitable for displaying to end-users. For example, 'BLE Heart Monitor' etc.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "active", "type": "boolean", "description": "A mutable boolean value indicating the device administrative status. If set TRUE, the commands (such as connect, disconnect, subscribe) that control app sends to the controller for the devices will be processeed by the controller. If set FALSE, any command comming from the control app for the device will be rejected by the controller.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "mudUrl", "type": "reference", "description": "A URL to MUD file of the device (RFC 8520).", "multivalues": false, "required": false, "caseExact": true, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:Device" } } <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:core:2.0:EndpointApp", "name": "EndpointApp", "description": "Endpoint application and their credentials", "attributes" : [ { "name": "applicationType", "type": "string", "description": "This attribute will only contain two values; 'deviceControl' or 'telemetry'.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readOnly", "returned": "default", "uniqueness": "none" }, { "name": "applicationName", "type": "string", "description": "Human readable name of the application.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "certificateInfo", "type": "complex", "description": "Contains x509 certificate's subject name and root CA information associated with the device control or telemetry app.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none", "subAttributes" : [ { "name" : "rootCN", "type" : "string", "description" : "A root certificate common name.", "multiValued" : false, "required" : true, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "subjectName", "type" : "string", "description" : "Also known as the Common Name (CN), the Subject Name is a field in the X.509 certificate that identifies the primary domain or IP address for which the certificate is issued.", "multiValued" : false, "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "subjectAlternativeName", "type" : "string", "description" : "This attribute allows for the inclusion of multiple domain names and IP addresses in a single certificate. This enables the certificate to be used for multiple related domains or IPs without the need for separate certificates for each.", "multiValued" : true, "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" } ] }, { "name": "clientToken", "type": "string", "description": "This attribute contains a token that the client will use to authenticate itself. Each token may be a string up to 500 characters in length.", "multivalues": false, "required": false, "caseExact": true, "mutability": "readOnly", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas:core:2.0:Device" } } <CODE ENDS>¶
<CODE BEGINS> [ { "id": "urn:ietf:params:scim:schemas:extension:ble:2.0:Device", "name": "bleExtension", "description": "Ble extension for device account", "attributes" : [ { "name": "versionSupport", "type": "string", "description": "Provides a list of all the BLE versions supported by the device. For example, [4.1, 4.2, 5.0, 5.1, 5.2, 5.3].", "multivalues": true, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "deviceMacAddress", "type": "string", "description": "It is the public MAC address assigned by the manufacturer. It is unique 48 bit value. The regex pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "Manufacturer" }, { "name": "isRandom", "type": "boolean", "description": "The isRandom flag is taken from the BLE core specifications 5.3. If TRUE, device is using Random address which is resolved using IRK. If not present, the value is FALSE.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "separateBroadcastAddress", "type": "string", "description": "When present, this address is used for broadcasts/advertisements. This value MUST NOT be set when an IRK is provided. Its form is the same as deviceMa`cAddress.", "multivalues": true, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "irk", "type": "string", "description": "Identity resolving key, which is unique for every device. It is used to resolve random address. This value MUST NOT be set when separateBroadcastAddress is set.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "Manufacturer" }, { "name": "mobility", "type": "bool", "description": "If set to True, the BLE device will automatically connect to the closest AP. For example, BLE device is connected with AP-1 and moves out of range but comes in range of AP-2, it will be disconnected with AP-1 and connects with AP-2.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "pairingMethods", "type": "string", "description": "List of pairing methods associated with the ble device, stored as schema URI.", "multivalues": true, "required": true, "caseExact": true, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:ble:2.0:Device" } }, { "id": "urn:ietf:params:scim:schemas:extension:pairingNull:2.0 :Device", "name": "nullPairing", "description": "Null pairing method for ble. It is included for the devices that do not have a pairing method.", "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:pairingNull:2.0:Device" } }, { "id": "urn:ietf:params:scim:schemas:extension:pairingJustWorks :2.0:Device", "name": "pairingJustWorks", "description": "Just works pairing method for ble.", "attributes" : [ { "name": "key", "type": "integer", "description": "Just works does not have any key value. For completeness, it is added with a key value 'null'.", "multivalues": false, "required": true, "caseExact": false, "mutability": "immutable", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:pairingJustWorks:2.0:Device" } }, { "id": "urn:ietf:params:scim:schemas:extension:pairingPassKey :2.0:Device", "name": "pairingPassKey", "description": "Pass key pairing method for ble.", "attributes" : [ { "name": "key", "type": "integer", "description": "A six digit passkey for ble device. The pattern of key is ^[0-9]{6}$.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:pairingPassKey:2.0:Device" } }, { "id": "urn:ietf:params:scim:schemas:extension:pairingOOB:2.0 :Device", "name": "pairingOOB", "description": "Pass key pairing method for ble.", "attributes" : [ { "name": "key", "type": "string", "description": "A key value retrieved from out of band source such as NFC.", "multivalues": false, "required": true, "caseExact": true, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "randomNumber", "type": "integer", "description": "Nonce added to the key.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "confirmationNumber", "type": "integer", "description": "Some solutions require confirmation number in RESTful message exchange.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:pairingOOB:2.0:Device" } } ] <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:extension:dpp:2.0:Device", "name": "dppExtension", "description": "Device extension schema for DPP", "attributes" : [ { "name": "dppVersion", "type": "integer", "description": "Version of DPP this device supports.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "bootstrappingMethod", "type": "string", "description": "The list of all the bootstrapping methods available on the enrollee device. For example, [QR, NFC].", "multivalues": true, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "bootstrapKey", "type": "string", "description": "This key is Elliptic-Curve Diffie–Hellman (ECDH) public key. The base64 encoded length for P-256, P-384, and P-521 is 80, 96, and 120 characters.", "multivalues": false, "required": true, "caseExact": true, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "deviceMacAddress", "type": "string", "description": "The MAC address assigned by the manufacturer. It is unique 48 bit value. The regex pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "Manufacturer" }, { "name": "classChannel", "type": "string", "description": "A list of global operating class and channel shared as bootstrapping information. It is formatted as class/channel. For example, '81/1', '115/36'.", "multivalues": true, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "serialNumber", "type": "string", "description": "An alphanumeric serial number that may also be passed as bootstrapping information.", "multivalues": false, "required": false, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:dpp:2.0:Device" } } <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0 :Device", "name": "ethernetMabExtension", "description": "Device extension schema for MAC authentication Bypass.", "attributes" : [ { "name": "deviceMacAddress", "type": "string", "description": "A MAC address assigned by the manufacturer. It is unique 48 bit value. The regex pattern is ^[0-9A -Fa-f]{2}(:[0-9A-Fa-f]{2}){5}.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "Manufacturer" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:ethernet-mab:2.0:Device" } } <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:extension:fido-device-onboard :2.0:Devices", "name": "FDOExtension", "description": "Device extension schema for Fido Device Onboard.", "attributes" : [ { "name": "fdoVoucher", "type": "string", "description": "A Fido Voucher as Defined in the FDO specification" "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "Manufacturer" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:fido-device-onboard:2.0:Devices" } } <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device", "name": "zigbeeExtension", "description": "Device extension schema for zigbee.", "attributes" : [ { "name": "versionSupport", "type": "string", "description": "Provides a list of all the zigbee versions supported by the device. For example, [3.0].", "multivalues": true, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" }, { "name": "deviceEui64Address", "type": "string", "description": "The EUI-64 (Extended Unique Identifier) device address. The regex pattern is ^[0-9A-Fa-f]{16}$.", "multivalues": false, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:zigbee:2.0:Device" } } <CODE ENDS>¶
<CODE BEGINS> { "id": "urn:ietf:params:scim:schemas:extension:endpointAppsExt:2.0 :Device", "name": "endpointAppsExt", "description": "Extension for partner endpoint applications that can onboard, control, and communicate with the device.", "attributes" : [ { "name": "applications", "type": "complex", "description": "Includes references to two types of application that connect with entrprise, i.e., deviceControl and telemetry.", "multivalues": true, "required": true, "caseExact": false, "mutability": "readWrite", "returned": "default", "uniqueness": "none", "subAttributes" : [ { "name" : "value", "type" : "string", "description" : "The identifier of the endpointApp.", "multiValued" : false, "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "$ref", "type" : "reference", "referenceTypes" : "EndpointApps", "description" : "The URI of the corresponding 'EndpointApp' resource which will control or obtain data from the device.", "multiValued" : false, "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" } ] }, { "name": "deviceControlEnterpriseEndpoint", "type": "reference", "description": "The URL of the enterprise endpoint which device control apps use to reach enterprise network gateway.", "multivalues": false, "required": true, "caseExact": true, "mutability": "readOnly", "returned": "default", "uniqueness": "Enterprise" }, { "name": "telemetryEnterpriseEndpoint", "type": "reference", "description": "The URL of the enterprise endpoint which telemetry apps use to reach enterprise network gateway.", "multivalues": false, "required": true, "caseExact": true, "mutability": "readOnly", "returned": "default", "uniqueness": "Enterprise" } ], "meta" : { "resourceType" : "Schema", "location" : "/v2/Schemas/urn:ietf:params:scim:schemas :extension:endpointAppsExt:2.0:Device" } } <CODE ENDS>¶
The following is the JSON representation of the Schema. Implementors MUST NOT vary from the schema definitions in their implementations. They may choose not to implement a particular extension, but if they do, they MUST implement all mandatory elements, and they must implement optional elements as specified.¶
<CODE BEGINS> { "id" : "urn:ietf:params:scim:schemas:core:2.0:Schema", "name" : "Schema", "description" : "Specifies the schema that describes a SCIM schema", "attributes" : [ { "name" : "id", "type" : "string", "multiValued" : false, "description" : "The unique URI of the schema. When applicable, service providers MUST specify the URI.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "name", "type" : "string", "multiValued" : false, "description" : "The schema's human-readable name. When applicable, service providers MUST specify the name, e.g., 'Device'.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "description", "type" : "string", "multiValued" : false, "description" : "Human-readable description of the schema, e.g., 'Device account'.", "required" : false, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "attributes", "type" : "complex", "multiValued" : true, "description" : "A complex attribute that includes the attributes of a schema.", "required" : true, "mutability" : "readOnly", "returned" : "default", "subAttributes" : [ { "name" : "name", "type" : "string", "multiValued" : false, "description" : "The attribute's name, e.g., 'displayName'.", "required" : true, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "type", "type" : "string", "multiValued" : false, "description" : "The attribute's data type. Valid values include 'string', 'complex', 'boolean', 'decimal', 'integer', 'dateTime', 'reference'.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "string", "complex", "boolean", "decimal", "integer", "dateTime", "reference" ] }, { "name" : "multiValued", "type" : "boolean", "multiValued" : false, "description" : "A Boolean value indicating an attribute's plurality.", "required" : true, "mutability" : "readOnly", "returned" : "default" }, { "name" : "description", "type" : "string", "multiValued" : false, "description" : "A human-readable description of the attribute.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "required", "type" : "boolean", "multiValued" : false, "description" : "A boolean value indicating whether or not the attribute is required.", "required" : true, "mutability" : "readOnly", "returned" : "default" }, { "name" : "canonicalValues", "type" : "string", "multiValued" : true, "description" : "A collection of canonical values. When applicable, service providers MUST specify the canonical types, e.g., mutability of an attribute, return type, uniqueness.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "caseExact", "type" : "boolean", "multiValued" : false, "description" : "A Boolean value indicating whether or not a string attribute is case sensitive.", "required" : false, "mutability" : "readOnly", "returned" : "default" }, { "name" : "mutability", "type" : "string", "multiValued" : false, "description" : "Indicates whether or not an attribute is modifiable.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "readOnly", "readWrite", "immutable", "writeOnly" ] }, { "name" : "returned", "type" : "string", "multiValued" : false, "description" : "Indicates when an attribute is returned in a response (e.g., to a query).", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "always", "never", "default", "request" ] }, { "name" : "uniqueness", "type" : "string", "multiValued" : false, "description" : "Indicates how unique a value must be.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "none", "Enterprise", "Manufacturer" ] }, { "name" : "referenceTypes", "type" : "string", "multiValued" : false, "description" : "Used only with an attribute of type 'reference'. Specifies a SCIM resourceType that a reference attribute MAY refer to, e.g., 'EndpointApp'.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "subAttributes", "type" : "complex", "multiValued" : true, "description" : "Used to define the sub-attributes of a complex attribute.", "required" : false, "mutability" : "readOnly", "returned" : "default", "subAttributes" : [ { "name" : "name", "type" : "string", "multiValued" : false, "description" : "The attribute's name.", "required" : true, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "type", "type" : "string", "multiValued" : false, "description" : "The attribute's data type. Valid values include 'string', 'complex', 'boolean', 'decimal', 'integer', 'dateTime', 'reference'.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "string", "complex", "boolean", "decimal", "integer", "dateTime", "reference" ] }, { "name" : "multiValued", "type" : "boolean", "multiValued" : false, "description" : "A Boolean value indicating an attribute's plurality.", "required" : true, "mutability" : "readOnly", "returned" : "default" }, { "name" : "description", "type" : "string", "multiValued" : false, "description" : "A human-readable description of the attribute.", "required" : true, "caseExact" : false, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "required", "type" : "boolean", "multiValued" : false, "description" : "A boolean value indicating whether or not the attribute is required.", "required" : true, "mutability" : "readOnly", "returned" : "default" }, { "name" : "canonicalValues", "type" : "string", "multiValued" : true, "description" : "A collection of canonical values. When applicable, service providers MUST specify the canonical types, e.g., mutability of an attribute, return type, uniqueness.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" }, { "name" : "caseExact", "type" : "boolean", "multiValued" : false, "description" : "A Boolean value indicating whether or not a string attribute is case sensitive.", "required" : false, "mutability" : "readOnly", "returned" : "default" }, { "name" : "mutability", "type" : "string", "multiValued" : false, "description" : "Indicates whether or not an attribute is modifiable.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "readOnly", "readWrite", "immutable", "writeOnly" ] }, { "name" : "returned", "type" : "string", "multiValued" : false, "description" : "Indicates when an attribute is returned in a response (e.g., to a query).", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "always", "never", "default", "request" ] }, { "name" : "uniqueness", "type" : "string", "multiValued" : false, "description" : "Indicates how unique a value must be.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none", "canonicalValues" : [ "none", "Enterprise", "Manufacturer" ] }, { "name" : "referenceTypes", "type" : "string", "multiValued" : false, "description" : "Used only with an attribute of type 'reference'. Specifies a SCIM resourceType that a reference attribute MAY refer to, e.g., 'EndpointApp'.", "required" : false, "caseExact" : true, "mutability" : "readOnly", "returned" : "default", "uniqueness" : "none" } ] } ] } ] } <CODE ENDS>¶
Because provisioning operations are senstive, each client must be appropriately authenticated. Certain objects may be read-only or not visible based on who is connected.¶
Devices provisioned with this model may be completely controlled by the administrator of the SCIM server, depending on how those systems are defined. For instance, if BLE passkeys are provided, the device can be connected to, and perhaps paired with. Any additional security must be provided at higher application layers. For example, if client applications wish to keep private information to and from the device, they should encrypt that information over-the-top.¶
The IANA is requested to add the following additions to the "SCIM Schema URIs for Data Resources" registry as follows:¶
URN | Name | Reference |
---|---|---|
urn:ietf:params:scim:schemas:core: 2.0:Device | Core Device Schema | This memo, Section 3 |
urn:ietf:params:scim:schemas:core: 2.0:EndpointApp | Endpoint Application | This memo, Section 6 |
Note that the line break in URNs should be removed, as should this comment.¶
IANA is requested to create a separate table for Device Schema Extensions, as described in Section 7, with the following columns:¶
The policy for entries into this table shall be both "Expert Review" and "Specification Required", as specified in [RFC8126]. Reviewers shall check that each schema is produced in the format described in [RFC7643], and that the semantics of the schema are clear and unambiguous. It is also RECOMMENDED that schemas be made available in OpenAPI.¶
The initial table entries shall be as follows:¶
URN | Description | Reference |
---|---|---|
urn:ietf:params:scim:schemas:extension: ble:2.0:Device | BLE Extension | This memo, Section 7.1 |
urn:ietf:params:scim:schemas:extension: ethernet-mab:2.0:Device | Ethernet MAB | This memo, Section 7.3 |
urn:ietf:params:scim:schemas:extension: fido-device-onboard:2.0:Device | Fido Device Onboard | This memo, Section 7.4 |
urn:ietf:params:scim:schemas:extension: dpp:2.0:Device | Wifi EasyConnect | This memo, Section 7.2 |
urn:ietf:params:scim:schemas:extension: endpointAppsExt:2.0:Device | Application Endpoint Extension | This memo, Section 7.1.3 |
urn:ietf:params:scim:schemas:extension: pairingJustWorks:2.0:Device | Just Works Auth BLE | This memo, Section 7.1.3 |
urn:ietf:params:scim:schemas:extension: pairingOOB:2.0:Device | Out of Band Pairing for BLE | This memo, Section 7.1.3 |
urn:ietf:params:scim:schemas:extension: pairingPassKey:2.0:Device | Passkey Pairing for BLE | This memo, Section 7.1.3 |
Draft -03: * Add MAB, FDO * Some grammar improvements * fold OpenAPI * IANA considerations¶
Draft -02: * Clean up examples * Move openapi to appendix Draft -01:¶
Doh! We forgot the core device scheme!¶
Draft -00:¶
Initial revision¶
The following sections are provided for informational purposes.¶
OpenAPI representation of device core schema is as follows:¶
<CODE BEGINS> components: schemas: Device: title: Device description: Device account type: object properties: displayName: type: string description: "Human readable name of the device, suitable for displaying to end-users. For example, 'BLE Heart Monitor' etc." nullable: true readOnly: false writeOnly: false active: type: boolean description: A mutable boolean value indicating the device administrative status. If set TRUE, the commands (such as connect, disconnect, subscribe) that control app sends to the controller for the devices will be processeed by the controller. If set FALSE, any command comming from the control app for the device will be rejected by the controller. nullable: false readOnly: false writeOnly: false mudUrl: type: string format: uri description: A URL to MUD file of the device (RFC 8520). It is added for future use. Current usage is not defined yet. nullable: true readOnly: false writeOnly: false required: - active additionalProperties: false allOf: - $ref: '#/components/schemas/CommonAttributes' CommonAttributes: type: object properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:core:2.0:Device description: The list of schemas that define the resource. nullable: false id: type: string format: uri description: The unique identifier for a resource. nullable: false readOnly: true writeOnly: false externalId: type: string description: An identifier for the resource that is defined by the provisioning client. nullable: true readOnly: false writeOnly: false meta: type: object readOnly: true properties: resourceType: type: string description: The name of the resource type of the resource. nullable: false readOnly: true writeOnly: false location: type: string format: uri description: The URI of the resource being returned. nullable: false readOnly: true writeOnly: false created: type: string format: date-time description: The date and time the resource was added to the service provider. nullable: false readOnly: true writeOnly: false lastModified: type: string format: date-time description: The most recent date and time that the details of this resource were updated at the service provider. nullable: false readOnly: true writeOnly: false version: type: string description: The version of the resource. nullable: true readOnly: true writeOnly: false additionalProperties: false <CODE ENDS>¶
OpenAPI representation of endpointApp schema is as follows:¶
<CODE BEGINS> components: schemas: EndpointApp: title: EndpointApp description: Endpoint application resource type: object properties: applicationType: type: string description: "This attribute will only contain two values; 'deviceControl' or 'telemetry'." nullable: false readOnly: false writeOnly: false applicationName: type: string description: Human readable name of the application. nullable: false readOnly: false writeOnly: false required: - applicationType - applicationName additionalProperties: true oneOf: - $ref: '#/components/schemas/clientToken' - $ref: '#/components/schemas/certificateInfo' allOf: - $ref: '#/components/schemas/CommonAttributes' clientToken: type: string description: "This attribute contains a token that the client will use to authenticate itself. Each token may be a string up to 500 characters in length." nullable: true readOnly: true writeOnly: false certificateInfo: type: object description: "Contains x509 certificate's subject name and root CA information associated with the device control or telemetry app." properties: rootCN: type: string description: "A root certificate common name." nullable: false readOnly: true writeOnly: false subjectName: type: string description: "Also known as the Common Name (CN), the Subject Name is a field in the X.509 certificate that identifies the primary domain or IP address for which the certificate is issued." nullable: false readOnly: true writeOnly: false subjectAlternativeName: type: array items: type: string description: "This attribute allows for the inclusion of multiple domain names and IP addresses in a single certificate. This enables the certificate to be used for multiple related domains or IPs without the need for separate certificates for each. " nullable: true readOnly: true writeOnly: false required: - rootCN CommonAttributes: type: object properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:core:2.0:EndpointApp description: The list of schemas that define the resource. nullable: false id: type: string format: uri description: The unique identifier for a resource. nullable: false readOnly: true writeOnly: false meta: type: object readOnly: true properties: resourceType: type: string description: The name of the resource type of the resource. nullable: false readOnly: true writeOnly: false location: type: string format: uri description: The URI of the resource being returned. nullable: false readOnly: true writeOnly: false created: type: string format: date-time description: The date and time the resource was added to the service provider. nullable: false readOnly: true writeOnly: false lastModified: type: string format: date-time description: The most recent date and time that the details of this resource were updated at the service provider. nullable: false readOnly: true writeOnly: false version: type: string description: The version of the resource. nullable: true readOnly: true writeOnly: false additionalProperties: false <CODE ENDS>¶
OpenAPI representation of BLE extension schema is as follows:¶
<CODE BEGINS> components: schemas: BleDevice: type: object description: BLE Device schema. properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:extension:ble:2.0 :Device urn:ietf:params:scim:schemas:extension:ble:2.0:Device: $ref: '#/components/schemas/BleDeviceExtension' required: true BleDeviceExtension: type: object properties: versionSupport: type: array items: type: string description: Provides a list of all the BLE versions supported by the device. For example, [4.1, 4.2, 5.0, 5.1, 5.2, 5.3]. nullable: false readOnly: false writeOnly: false deviceMacAddress: type: string description: It is the public MAC address assigned by the manufacturer. It is unique 48 bit value. The regex pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}. nullable: false readOnly: false writeOnly: false isRandom: type: boolean description: AddressType flag is taken from the BLE core specifications 5.3. If FALSE, the device is using public MAC address. If TRUE, device is using Random address which is resolved using the IRK. nullable: false readOnly: false writeOnly: false separateBroadcastAddress: type: string description: "When present, this address is used for broadcasts/advertisements. This value MUST NOT be set when an IRK is provided. Its form is the same as deviceMa`cAddress." nullable: false readOnly: false writeOnly: false irk: type: string description: Identity resolving key, which is unique for every device. It is used to resolve random address. nullable: true readOnly: false writeOnly: false mobility: type: boolean description: If set to True, the BLE device will automatically connect to the closest AP. For example, BLE device is connected with AP-1 and moves out of range but comes in range of AP -2, it will be disconnected with AP-1 and connects with AP-2. nullable: false readOnly: false writeOnly: false pairingMethods: type: array items: type: string description: List of pairing methods associated with the ble device, stored as schema URI. nullable: true readOnly: false writeOnly: false urn:ietf:params:scim:schemas:extension:pairingNull:2.0 :Device: $ref: '#/components/schemas/NullPairing' required: false urn:ietf:params:scim:schemas:extension:pairingJustWorks:2.0 :Device: $ref: '#/components/schemas/PairingJustWorks' required: false urn:ietf:params:scim:schemas:extension:pairingPassKey:2.0 :Device: $ref: '#/components/schemas/PairingPassKey' required: false urn:ietf:params:scim:schemas:extension:pairingOOB:2.0 :Device: $ref: '#/components/schemas/PairingOOB' required: false required: - versionSupport - deviceMacAddress - AddressType - pairingMethods additionalProperties: false NullPairing: type: object PairingJustWorks: type: object description: Just works pairing method for ble properties: key: type: integer description: Just works does not have any key value. For completeness, it is added with a key value 'null'. nullable: false readOnly: false writeOnly: false required: - key PairingPassKey: type: object description: Pass key pairing method for ble properties: key: type: integer description: A six digit passkey for ble device. The pattern of key is ^[0-9]{6}$. nullable: false readOnly: false writeOnly: false required: - key PairingOOB: type: object description: Out-of-band pairing method for BLE properties: key: type: string description: The OOB key value for ble device. nullable: false readOnly: false writeOnly: false randomNumber: type: integer description: Nonce added to the key nullable: false readOnly: false writeOnly: false confirmationNumber: type: integer description: Some solutions require a confirmation number in the RESTful message exchange. nullable: true readOnly: false writeOnly: false required: - key - randomNumber <CODE ENDS>¶
OpenAPI representation of DPP extension schema is as follows:¶
<CODE BEGINS> components: schemas: DppDevice: type: object description: DPP device extension schema properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:extension:dpp:2.0 :Device urn:ietf:params:scim:schemas:extension:dpp:2.0:Device: $ref: '#/components/schemas/DppDeviceExtension' required: true DppDeviceExtension: type: object properties: dppVersion: type: integer description: Version of DPP this device supports. nullable: false readOnly: false writeOnly: false bootstrappingMethod: type: array items: type: string description: The list of all the bootstrapping methods available on the enrollee device. For example, [QR, NFC]. nullable: true readOnly: false writeOnly: false bootstrapKey: type: string description: This key is Elliptic-Curve Diffie–Hellman (ECDH) public key. The base64 encoded length for P-256, P-384, and P-521 is 80, 96, and 120 characters. nullable: false readOnly: false writeOnly: false deviceMacAddress: type: string description: The MAC address assigned by the manufacturer. The regex pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}. nullable: false readOnly: false writeOnly: false classChannel: type: array items: type: string description: A list of global operating class and channel shared as bootstrapping information. It is formatted as class/channel. For example, '81/1', '115/36'. nullable: false readOnly: false writeOnly: false serialNumber: type: string description: An alphanumeric serial number that may also be passed as bootstrapping information. nullable: false readOnly: false writeOnly: false required: - dppVersion - bootstrapKey additionalProperties: false <CODE ENDS>¶
OpenAPI representation of Ethernet MAB extension schema is as follows:¶
<CODE BEGINS> components: schemas: EthernetMABDevice: type: object description: Ethernet MAC Authenticated Bypass properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:extension:ethernet-mab :2.0:Device urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0 :Device: $ref: '#/components/schemas/EthernetMABDeviceExtension' required: true EthernetMABDeviceExtension: type: object properties: deviceMacAddress: type: string description: It is the public MAC address assigned by the manufacturer. It is unique 48 bit value. The regex pattern is ^[0-9A-Fa-f]{2}(:[0-9A-Fa-f]{2}){5}. nullable: false readOnly: false writeOnly: false required: - deviceMacAddress description: Device extension schema for Ethernet-MAB <CODE ENDS>¶
OpenAPI representation of FDO extension schema is as follows:¶
<CODE BEGINS> components: schemas: FDODevice: type: object description: Fido Device Onboarding Voucher Extension properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:extension:ethernet-mab :2.0:Devices urn:ietf:params:scim:schemas:extension:ethernet-mab:2.0 :Devices: $ref: '#/components/schemas/FDODeviceExtension' required: true FDODeviceExtension: type: object properties: fdoVoucher: type: string description: A Fido Device Onboarding Voucher nullable: false readOnly: false writeOnly: false required: - fdoVoucher description: Device Extension for a Fido Device Onboarding Voucher <CODE ENDS>¶
OpenAPI representation of zigbee extension schema is as follows:¶
<CODE BEGINS> components: schemas: ZigbeeDevice: type: object description: Zigbee Device schema. properties: schemas: type: array items: type: string enum: - urn:ietf:params:scim:schemas:extension:zigbee:2.0 :Device urn:ietf:params:scim:schemas:extension:zigbee:2.0:Device: $ref: '#/components/schemas/ZigbeeDeviceExtension' required: true ZigbeeDeviceExtension: type: object properties: versionSupport: type: array items: type: string description: Provides a list of all the Zigbee versions supported by the device. For example, [3.0]. nullable: false readOnly: false writeOnly: false deviceEui64Address: type: string description: The EUI-64 (Extended Unique Identifier) device address. The regex pattern is ^[0-9A-Fa-f]{16}$. nullable: false readOnly: false writeOnly: false required: - versionSupport - deviceEui64Address description: Device extension schema for Zigbee. <CODE ENDS>¶
OpenAPI representation of endpoint Apps extension schema is as follows:¶
<CODE BEGINS> components: schemas: EndpointAppsExt: type: object properties: applications: $ref: '#/components/schemas/applications' deviceControlEnterpriseEndpoint: type: string format: url description: The URL of the enterprise endpoint which device control apps use to reach enterprise network gateway. nullable: false readOnly: true writeOnly: false telemetryEnterpriseEndpoint: type: string format: url description: The URL of the enterprise endpoint which telemetry apps use to reach enterprise network gateway. nullable: false readOnly: true writeOnly: false required: - applications - deviceControlEnterpriseEndpoint - telemetryEnterpriseEndpoint applications: type: array items: value: type: string description: The identifier of the endpointApp. nullable: false readOnly: true writeOnly: false ref: type: string format: uri description: The URI of the corresponding 'EndpointApp' resource which will control or obtain data from the device. nullable: false readOnly: true writeOnly: false required: - value - ref <CODE ENDS>¶