Internet-Draft Privacy Pass Architecture December 2022
Davidson, et al. Expires 11 June 2023 [Page]
Workgroup:
Network Working Group
Internet-Draft:
draft-ietf-privacypass-architecture-09
Published:
Intended Status:
Informational
Expires:
Authors:
A. Davidson
LIP
J. Iyengar
Fastly
C. A. Wood
Cloudflare

The Privacy Pass Architecture

Abstract

This document specifies the Privacy Pass architecture and requirements for its constituent protocols used for constructing anonymous-credential authentication mechanisms. It provides recommendations on how the architecture should be deployed to ensure the privacy of clients and the security of all participating entities.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 11 June 2023.

Table of Contents

1. Introduction

Privacy Pass is an architecture for authorization based on anonymous-credential authentication mechanisms. Typical approaches for authorizing clients, such as through the use of long-term cookies, are not privacy-friendly since they allow servers to track clients across sessions and interactions. Privacy Pass takes a different approach: instead of presenting linkable state carrying information to servers, e.g., a cookie indicating whether or not the client is an authorized user or has completed some prior challenge, clients present unlinkable proofs that attest to this information. These proofs, or tokens, are anonymous in the sense that a given token cannot be linked to the protocol instance in which that token was initially issued.

At a high level, the Privacy Pass architecture consists of two protocols: issuance and redemption. The issuance protocol runs between an endpoint referred to as a Client and two functions in the Privacy Pass architecture: Attestation and Issuance. These two network functions can be implemented by the same protocol participant, but can also be implemented separately. The entity that implements Issuance, referred to as the Issuer, is responsible for issuing tokens in response to requests from Clients. The entity that implements Attestation, referred to as the Attester, is responsible for attesting to properties about the Client for which tokens are issued. The Issuer needs to be trusted by the server that later redeems the token. Attestation can be performed by the Issuer or by an Attester that is trusted by the Issuer. Clients might prefer to select different Attesters, separate from the Issuer, to be able to use preferred authentication methods or to improve privacy by not directly communicating with an Issuer. Depending on the attestation, Attesters can store state about a Client, such as the number of overall tokens issued thus far. As an example of an issuance protocol, in the original Privacy Pass protocol [PPSRV][PPEXT], tokens were only issued to Clients that solved CAPTCHAs. In this context, the Attester attested that some client solved a CAPTCHA and the resulting token produced by the Issuer was proof of this fact.

The redemption protocol runs between Client and Origin (server). It allows Origins to challenge Clients to present one or more tokens for authorization. Depending on the type of token, e.g., whether or not it can be cached, the Client either presents a previously obtained token or invokes the issuance protocol to acquire one for authorization.

The issuance and redemption protocols operate in concert as shown in the figure below.

      Origin          Client        Attester          Issuer
  /---------------------------------------------------------------------
  |                  /-----------------------------------------\
  | TokenChallenge --> Attest --->                             |
  |                  | TokenRequest --------------->           |
  |   Redemption     |                              (validate) | Issuance
  |      Flow        |                              (evaluate) |   Flow
  |                  |     <-------------------  TokenResponse |
  |     <---- Token  |                                         |
  |                  \-----------------------------------------/
  \---------------------------------------------------------------------
Figure 1: Privacy Pass Architectural Components

This document describes requirements for both issuance and redemption protocols. It also provides recommendations on how the architecture should be deployed to ensure the privacy of clients and the security of all participating entities.

The privacypass working group is working on [HTTP-Authentication] as an instantiation of a redemption protocol and [ISSUANCE] as an instantiation of the issuance protocol.

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

The following terms are used throughout this document.

3. Architecture

The Privacy Pass architecture consists of four logical entities -- Client, Origin, Issuer, and Attester -- that work in concert as shown in Section 1 for token issuance and redemption. This section describes the purpose of token issuance and redemption and the requirements therein on the relevant participants.

3.1. Redemption Protocol

The redemption protocol is an authorization protocol wherein Clients present tokens to Origins for authorization. Normally, redemption follows a challenge-response flow, wherein the Origin challenges Clients for a token and, if possible, Clients present a valid token for the challenge in response. Alternatively, when configured to do so, Clients may opportunistically present tokens to Origins without a corresponding challenge.

The context in which an Origin challenges a Client for a token is referred to as the redemption context. This context includes all information associated with the redemption event, such as the timestamp of the event, Client visible information (including the IP address), and the Origin name.

The challenge controls the type of token that the Origin will accept for the given resource. As described in [HTTP-Authentication], there are a number of ways in which the token may vary, including:

  • Issuance protocol. The token identifies the type of issuance protocol required for producing the token. Different issuance protocols have different security properties, e.g., some issuance protocols may produce tokens that are publicly verifiable, whereas others may not have this property.
  • Issuer identity. Tokens identify which Issuers are trusted for a given issuance protocol. Each Issuer, in turn, determines which Attesters it is willing to accept in the issuance protocol. This means that if an Origin origin.example accepts tokens issued by Issuer issuer.example, and that Issuer in turn accepts different types of attestation from more than one trusted Attester, then a Client may use either of these trusted Attesters to issue and redeem tokens for origin.example. However, origin.example neither explicitly specifies nor learns the Attesters or their attestation formats used for token issuance.
  • Redemption context. Tokens can be bound to a given redemption context, which influences a client's ability to pre-fetch and cache tokens. For example, an empty redemption context always allows tokens to be issued and redeemed non-interactively, whereas a fresh and random redemption context means that the redeemed token must be issued only after the client receives the challenge. See Section 2.1.1 of [HTTP-Authentication] for more details.
  • Per-Origin or cross-Origin. Tokens can be constrained to the Origin for which the challenge originated (referred to as per-Origin tokens), or can be used across multiple Origins (referred to as cross-Origin tokens). The set of Origins for which a cross-Origin token is applicable is referred to as the cross-Origin set.

Origins that admit cross-Origin tokens bear some risk of allowing tokens issued for one Origin to be spent in an interaction with another Origin. In particular, depending on the use case, Origins may need to maintain state to track redeemed tokens. For example, Origins that accept cross-Origin tokens across shared redemption contexts SHOULD track which tokens have been redeemed already in those redemption contexts, since these tokens can be issued and then spent multiple times in response to any such challenge. See Section 2.1.1 of [HTTP-Authentication] for discussion.

3.2. Issuance Protocol

The issuance protocol embodies the core of Privacy Pass. It takes as input a challenge from the redemption protocol and produces a token, as shown in the figure below.

  Origin          Client        Attester          Issuer

                  +--------------------------------------\
    Challenge ----> Attest ------->                      |
                  | TokenRequest ------------------>     |
                  |                            (validate)|
                  |                            (evaluate)|
      Token  <----+  <-------------------  TokenResponse |
                  |--------------------------------------/
Figure 2: Issuance Overview

Clients interact with the Attester and Issuer to produce a token in response to a challenge. The context in which an Attester vouches for a Client during issuance is referred to as the attestation context. This context includes all information associated with the issuance event, such as the timestamp of the event and Client visible information, including the IP address or other information specific to the type of attestation done.

Each issuance protocol may be different, e.g., in the number and types of participants, underlying cryptographic constructions used when issuing tokens, and even privacy properties.

Clients initiate the issuance protocol using the challenge, a randomly generated nonce, and public key for the Issuer, all of which are the Client's private input to the protocol and ultimately bound to an output Token; see Section 2.2. of [HTTP-Authentication] for details. Future specifications may change or extend the Client's input to the issuance protocol to produce Tokens with a different structure.

The issuance protocol itself can be any interactive protocol between Client, Issuer, or other parties that produces a valid authenticator over the Client's private input, subject to the following security requirements.

  1. Unconditional input secrecy. The issuance protocol MUST NOT reveal anything about the Client's private input, including the challenge and nonce, to the Attester or Issuer, regardless of the hardness assumptions of the underlying cryptographic protocol(s). The issuance protocol can reveal the Issuer public key for the purposes of determining which private key to use in producing the token.
  2. One-more forgery security. The issuance protocol MUST NOT allow malicious Clients or Attesters (acting as Clients) to forge tokens offline or otherwise without interacting with the Issuer directly.
  3. Concurrent security. The issuance protocol MUST be safe to run concurrently with arbitrarily many Clients, Attesters and Issuers.

See Section 3.2.4 for requirements on new issuance protocol variants and related extensions.

Clients obtain the Issuer public key directly from the Origin using the process described in [HTTP-Authentication]. Clients MAY apply some form of key consistency check to determine if this public key is consistent and correct for the specified Issuer. See [CONSISTENCY] for example mechanisms. Depending on the deployment, the Attester might assist the Client in applying these consistency checks across clients.

Depending on the use case, issuance may require some form of Client anonymization service, similar to an IP-hiding proxy, so that Issuers cannot learn information about Clients. This can be provided by an explicit participant in the issuance protocol, or it can be provided via external means, such as through the use of an IP-hiding proxy service like Tor. In general, Clients SHOULD minimize or remove identifying information where possible when invoking the issuance protocol.

Issuers MUST NOT issue tokens for Clients through untrusted Attesters. This is important because the Attester's role is to vouch for trust in privacy-sensitive Client information, such as account identifiers or IP address information, to the Issuer. Tokens produced by an Issuer that admits issuance for any type of attestation cannot be relied on for any specific property. See Section 3.2.1 for more details.

3.2.1. Attester Role

Attestation is an important part of the issuance protocol. Attestation is the process by which an Attester bears witness to, confirms, or authenticates a Client so as to verify a property about the Client that is required for Issuance. Examples of attestation properties include, though are not limited to:

  • Capable of solving a CAPTCHA. Clients that solve CAPTCHA challenges can be attested to have this capability for the purpose of being ruled out as a bot or otherwise automated Client.
  • Client state. Clients can be associated with state and the attester can attest to this state. Examples of state include the number of issuance protocol invocations, the Client's geographic region, and whether the client has a valid application-layer account.
  • Trusted device. Some Clients run on trusted hardware that are capable of producing device-level attestation statements.

Each of these attestation types has different security properties. For example, attesting to having a valid account is different from attesting to running on trusted hardware. In general, minimizing the set of attestation formats helps minimize the amount of information leaked through a token.

Each attestation format also has an impact on the overall system privacy. Requiring a conjunction of attestation types could decrease the overall anonymity set size. For example, the number of Clients that have solved a CAPTCHA in the past day, that have a valid account, and that are running on a trusted device is less than the number of Clients that have solved a CAPTCHA in the past day. Attesters SHOULD not admit attestation types that result in small anonymity sets.

The trustworthiness of attesters depends on their ability to correctly and reliably perform attestation during the issuance protocol. However, certain types of attestation can vary in value over time, e.g., if the attestation process is compromised or maliciously automated. These are considered exceptional events and require configuration changes to address the underlying cause. For example, if attestation is compromised because of a zero-day exploit on compliant devices, then the corresponding attestation format should be untrusted until the exploit is patched. Addressing changes in attestation quality is therefore a deployment-specific task. In Split Attester and Issuer deployments (see Section 4.4), Issuers can choose to remove compromised Attesters from their trusted set until the compromise is patched.

3.2.2. Issuer Role

Issuers MUST be uniquely identifiable by all Clients with a consistent identifier. In a web context, this identifier might be the Issuer host name. As discussed in Section 5, ecosystems that admit a large number of Issuers can lead to privacy concerns for the Clients in the ecosystem. Therefore, in practice, the number of Issuers should be bounded. The actual Issuers can be replaced with different Issuers as long as the total never exceeds these bounds. Moreover, Issuer replacements also have an effect on client anonymity that is similar to when a key rotation occurs. See Section 5 for more details about maintaining privacy with multiple Issuers.

3.2.2.1. Key Management

Issuers maintain an issuance key pair for the issuance protocol. The Issuer public key is made available to all Clients in such a way that key rotations and other updates are publicly visible. See Section 5.2 for more considerations around Issuer key rotation. The key material and protocol configuration that an Issuer uses to produce tokens corresponds to two different pieces of information.

  • The issuance protocol in use; and
  • The public keys that are active for the Issuer.

The way that the Issuer publishes and maintains this information impacts the effective privacy of the clients; see Section 5 for more details. The fundamental requirement for key management and discovery is that Issuers cannot target specific clients with unique keys without detection. There are a number of ways in which this might be implemented:

  • Servers use a verifiable, tamper-free registry from which clients discover keys. Similar to related mechanisms and protocols such as Certificate Transparency [RFC6962], this may require external auditors or additional client behavior to ensure the registry state is consistent for all clients.
  • Clients use an anonymity-preserving tool such as Tor to discover keys from multiple network vantage points. This is done to ensure consistent keys to seemingly different clients.
  • Clients embed Issuer keys into software.

As above, specific mechanisms for key management and discovery are out of scope for this document.

3.2.3. Metadata

Certain instantiations of the issuance protocol may permit public or private metadata to be cryptographically bound to a token. As an example, one trivial way to include public metadata is to assign a unique issuer public key for each value of metadata, such that N keys yields log2(N) bits of metadata. The total amount of metadata bits included in a token is the sum of public and private metadata bits.

Public metadata is that which clients can observe as part of the token issuance flow. Public metadata can either be transparent or opaque. For example, transparent public metadata is a value that the client either generates itself, or the Issuer provides during the issuance flow and the client can check for correctness. Opaque public metadata is metadata the client can see but cannot check for correctness. As an example, the opaque public metadata might be a "fraud detection signal", computed on behalf of the Issuer, during token issuance. In normal circumstances, Clients cannot determine if this value is correct or otherwise a tracking vector.

Private metadata is that which Clients cannot observe as part of the token issuance flow. Such instantiations may be built on the Private Metadata Bit construction from Kreuter et al. [KLOR20] or the attribute-based VOPRF from Huang et al. [HIJK21].

Metadata may also be arbitrarily long or bounded in length. The amount of permitted metadata may be determined by application or by the underlying cryptographic protocol.

3.2.4. Issuance Protocol Extensibility

The Privacy Pass architecture and ecosystem are both intended to be receptive to extensions that expand the current set of functionalities through new issuance protocols. Each issuance protocol MUST include a detailed analysis of the privacy impacts of the extension, why these impacts are justified, and guidelines on how to deploy the protocol to minimize any privacy impacts. Any extension to the Privacy Pass protocol MUST adhere to the guidelines specified in Section 3.2.2 for managing Issuer public key data.

4. Deployment Considerations

A Client uses Privacy Pass to separate attestation context and redemption context. Linking or combining these contexts can reveal sensitive information about the Client, including their identity or browsing history. Depending on the deployment model, separating these contexts can take different forms. The Origin, Attester, and Issuer portrayed in Figure 1 can be instantiated and deployed in a number of ways. This section covers some expected deployment models and their corresponding security and privacy considerations.

The discussion below assumes non-collusion between entities that have access to the attestation context and entities that have access to the redemption context, as collusion between such entities would enable linking of these contexts. Generally, this means that entities operated by separate parties do not collude. Mechanisms for enforcing non-collusion are out of scope for this architecture.

4.1. Shared Origin, Attester, Issuer

In this model, the Origin, Attester, and Issuer are all operated by the same entity, as shown in the figure below.

                   +------------------------------------------+
      Client       |  Attester         Issuer         Origin  |
        |          |                                          |
        |          |          Challenge                       |
        <----------------------------------------------+      |
        |          | Attest                                   |
        +----------------->                                   |
        |          |     TokenRequest                         |
        +-------------------------------->                    |
        |          |     TokenResponse                        |
        <--------------------------------+                    |
        |          |          Redeem                          |
        +---------------------------------------------->      |
                   +------------------------------------------+
Figure 3: Shared Deployment Model

This model represents the initial deployment of Privacy Pass, as described in [PPSRV]. In this model, the Attester, Issuer, and Origin share the attestation and redemption contexts. As a result, attestation mechanisms that can uniquely identify a Client, e.g., requiring that Clients authenticate with some type of application-layer account, are not appropriate, as they could be used to learn or reconstruct a Client's browsing history.

Attestation and redemption context unlinkability requires that these events be separated over time, such as through the use of tokens with an empty redemption context, or be separated over space, such as through the use of an anonymizing proxy when connecting to the Origin.

4.2. Joint Attester and Issuer

In this model, the Attester and Issuer are operated by the same entity that is separate from the Origin, as shown in the figure below.

                                                   +-----------+
      Client                                       |   Origin  |
        |                    Challenge             |           |
        <-----------------------------------------------+      |
        |                                          |           |
        |          +---------------------------+   |           |
        |          |  Attester         Issuer  |   |           |
        |          |                           |   |           |
        |          | Attest                    |   |           |
        +----------------->                    |   |           |
        |          |     TokenRequest          |   |           |
        +-------------------------------->     |   |           |
        |          |     TokenResponse         |   |           |
        <--------------------------------+     |   |           |
        |          +---------------------------+   |           |
        |                                          |           |
        |                    Redeem                |           |
        +----------------------------------------------->      |
                                                   |           |
                                                   +-----------+
Figure 4: Joint Attester and Issuer Deployment Model

This model is useful if an Origin wants to offload attestation and issuance to a trusted entity. In this model, the Attester and Issuer share an attestation context for the Client, which can be separate from the Origin's redemption context.

For certain types of issuance protocols, this model separates attestation and redemption contexts. However, issuance protocols that require the Issuer to learn information about the Origin, such as that which is described in [RATE-LIMITED], are not appropriate since they could link attestation and redemption contexts through the Origin name.

4.3. Joint Origin and Issuer

In this model, the Origin and Issuer are operated by the same entity, separate from the Attester, as shown in the figure below. The Issuer accepts token requests that come from trusted Attesters. Depending on the issuance protocol, the Attester may relay these requests between Client and Issuer over an authenticated channel, or trust may be established in some other manner.

                                    +--------------------------+
      Client                        |   Issuer         Origin  |
        |                Challenge  |                          |
        <-----------------------------------------------+      |
        |                           |                          |
        |          +-----------+    |                          |
        |          |  Attester |    |                          |
        |          |           |    |                          |
        |          | Attest    |    |                          |
        +----------------->    |    |                          |
        |          |           |    |                          |
        |          |     TokenRequest                          |
        +-------------------------------->                     |
        |          |           |    |                          |
        |          |     TokenResponse                         |
        <--------------------------------+                     |
        |          |           |    |                          |
        |          +-----------+    |                          |
        |                           |                          |
        |                 Redeem    |                          |
        +----------------------------------------------->      |
                                    +--------------------------+
Figure 5: Joint Origin and Issuer Deployment Model

This model is useful for Origins that require Client-identifying attestation, e.g., through the use of application-layer account information, but do not otherwise want to learn information about individual Clients beyond what is observed during the token redemption, such as Client IP addresses.

In this model, attestation and redemption contexts are separate. As a result, any type of attestation is suitable in this model. Moreover, any type of token challenge is suitable assuming there is more than one Origin involved, since no single party will have access to the identifying Client information and unique Origin information. If there is only a single Origin, then per-Origin tokens are not appropriate in this model, since the Attester can learn the redemption context. However, the Attester does not learn whether a token is per-Origin or cross-Origin.

4.4. Split Origin, Attester, Issuer

In this model, the Origin, Attester, and Issuer are all operated by different entities, as shown in the figure below. As with the joint Origin and Issuer model, the Issuer accepts token requests that come from trusted Attesters, and the details of that trust establishment depend on the issuance protocol.

                                                   +-----------+
      Client                                       |   Origin  |
        |                    Challenge             |           |
        <-----------------------------------------------+      |
        |                                          |           |
        |          +-----------+                   |           |
        |          |  Attester |                   |           |
        |          |           |                   |           |
        |          | Attest    |    +----------+   |           |
        +----------------->    |    |  Issuer  |   |           |
        |          |           |    |          |   |           |
        |          |     TokenRequest          |   |           |
        +-------------------------------->     |   |           |
        |          |           |    |          |   |           |
        |          |     TokenResponse         |   |           |
        <--------------------------------+     |   |           |
        |          |           |    |          |   |           |
        |          +-----------+    +----------+   |           |
        |                                          |           |
        |                    Redeem                |           |
        +----------------------------------------------->      |
                                                   |           |
                                                   +-----------+
Figure 6: Split Deployment Model

This is the most general deployment model, and is necessary for some types of issuance protocols where the Attester plays a role in token issuance; see [RATE-LIMITED] for one such type of issuance protocol. In this model, the Attester, Issuer, and Origin have a separate view of the Client: the Attester sees potentially sensitive Client identifying information, such as account identifiers or IP addresses, the Issuer sees only the information necessary for issuance, and the Origin sees token challenges, corresponding tokens, and Client source information, such as their IP address. As a result, attestation and redemption contexts are separate, and therefore any type of token challenge is suitable in this model as long as there is more than a single Origin. As in the Joint Origin and Issuer model in Section 4.3, if there is only a single Origin, then per-Origin tokens are not appropriate.

5. Privacy Considerations

A Client uses Privacy Pass to separate attestation context and redemption context. Depending on the deployment model, this can take different forms. For example, any Client can only remain private relative to the entire space of other Clients using the protocol. Moreover, by owning tokens for a given set of keys, the Client's anonymity set shrinks to the total number of Clients controlling tokens for the same keys.

In the following, we consider the possible ways that Issuers can leverage their position to try and reduce the size of the anonymity sets to which Clients belong, often by segregating Clients. For each case, we provide mitigations that the Privacy Pass ecosystem must implement to prevent these actions.

5.1. Metadata Privacy Implications

Any metadata bits of information can be used to further segment the size of the Client's anonymity set. Any Issuer that wanted to track a single Client could add a single metadata bit to Client tokens. For the tracked Client it would set the bit to 1, and 0 otherwise. Adding additional bits provides an exponential increase in tracking granularity similarly to introducing more Issuers (though with more potential targeting).

For this reason, the amount of metadata used by an Issuer in creating redemption tokens must be taken into account -- together with the bits of information that Issuers may learn about Clients otherwise. Since this metadata may be useful for practical deployments of Privacy Pass, Issuers must balance this against the reduction in Client privacy. In general, bounding the metadata permitted ensures that it cannot uniquely identify individual Clients.

5.2. Issuer Key Rotation

Issuer key rotation is important to hedge against long-term private key compromise. If an Issuer realizes that a key compromise has occurred then the Issuer should generate a new key and make it available to Clients. If possible, it should invoke any revocation procedures that may apply for the old key.

Key rotation can also be used to segment Client anonymity sets. In particular, when an Issuer rotates their key, any Client that invokes the issuance protocol in this key cycle will be part of a group of possible Clients owning valid tokens for this key. To mechanize this attack strategy, an Issuer could introduce a key rotation policy that forces Clients into small key cycles, reducing the size of the anonymity set for these Clients.

In general, key rotations represent a trade-off between Client privacy and Issuer security. Therefore, it is still important that key rotations occur on a regular cycle to reduce the harmfulness of an Issuer key compromise. If there are multiple Issuer keys in rotation, Clients can apply some form of consistency mechanism [CONSISTENCY] to ensure that they receive the same key as other Clients. Likewise, Origins can use one or more public keys for redemption to support Issuer key rotation.

5.3. Issuer Selection

Similarly to the Issuer rotation dynamic discussed above, if there are a large number of Issuers, and Origins accept all of them, segregation can occur. If Clients obtain tokens from many Issuers, and Origins later challenge a Client for a token from each Issuer, Origins can learn information about the Client. Each per-Issuer token that a Client holds essentially corresponds to a bit of information about the Client that Origin learns. Therefore, there is an exponential loss in anonymity relative to the number of Issuers.

For example, if there are 32 Issuers, then Origins learn 32 bits of information about the Client if a valid token is presented for each Issuer. As a contrasting example, if Clients ensure that they only hold tokens issued from 4 Issuers, then this increases the potential size of the anonymity sets that the Client belongs to. However, this doesn't protect Clients completely as it would if only 4 Issuers were permitted across the whole system. For example, these 4 Issuers could be different for each Client. Therefore, the selection of Issuers for which a Client possesses tokens is still revealing. This trade-off is important in deciding the effective anonymity of each Client in the system.

Clients SHOULD bound the number of Issuers they are willing to request tokens from at any given time. The exact bound depends on the deployment model and number of Clients, i.e., having a very large Client base could potentially allow for larger values. Issuer replacements should only occur with the same frequency as config rotations as they can lead to similar losses in anonymity if clients still hold redemption tokens for previously active Issuers.

Alternatively, when applicable, trusted registries can indicate which Issuers are deemed to be active. If a Client is asked to invoke the issuance protocol for an Issuer that is not declared active, then the client can refuse to run the protocol and obtain a token.

Another option to allow a large number of Issuers in the ecosystem, while preventing the joining of a number of different tokens, is for the Client to maintain sharded "redemption partitions". This would allow the Client to redeem the tokens it wishes to use in a particular context, while still allowing the Client to maintain a large variety of tokens from many Issuers. Within a redemption partition, the Client limits the number of different Issuers used to a small number to maintain the privacy properties the Client requires. As long as each redemption partition maintains a strong privacy boundary with the others, the number of bits of information the Origin can learn is bounded by the number of "redemption partitions".

To support this strategy, the client keeps track of a partition which contains the set of Issuers that redemptions have been attempted against. An empty redemption is returned when the limit has been hit:

  Client(partition, issuer)                     Issuer(skS, pkS)
  ------------------------------------------------------------
  if issuer not in partition {
    if partition.length > REDEEM_LIMIT {
      Output {}
      return
    }
    partition.push(issuer)
  }
  token = store[issuer.id].pop()
  req = Redeem(token, info)

                               req
                        ------------------>

                               if (dsIdx.includes(req.data)) {
                                 raise ERR_DOUBLE_SPEND
                               }
                               resp = Verify(pkS, skS, req)
                               if resp.success {
                                 dsIdx.push(req.data)
                               }

                                resp
                        <------------------
  Output resp

5.4. Side-Channel Attacks

Side-channel attacks, such as those based on timing correlation, could be used to link attestation and redemption contexts together. In particular, for interactive tokens that are bound to a Client-specific redemption context, the anonymity set of Clients during the issuance protocol consists of those Clients that started issuance between the time of the Origin's challenge and the corresponding token redemption. Depending on the number of Clients using a particular Issuer during that time window, the set can be small. Appliations should take such side channels into consideration before choosing a particular deployment model and type of token challenge and redemption context.

6. Centralization

A consequence of limiting the number of participants (Attesters or Issuers) in Privacy Pass deployments for meaningful privacy is that it forces concentrated centralization amongst those participants. [CENTRALIZATION] discusses several ways in which this might be mitigated. For example, a multi-stakeholder governance model could be established to determine what candidate participants are fit to operate as participants in a Privacy Pass deployment. This is precisely the system used to control the Web's trust model.

Alternatively, Privacy Pass deployments might mitigate this problem through implementation. For example, rather than centralize the role of attestation in one or few entities, attestation could be a distributed function performed by a quorum of many parties, provided that neither Issuers nor Origins learn which attester implementations were chosen. As a result, clients could have more opportunities to switch between attestation participants.

7. Security Considerations

Beyond the aforementioned security goals for the issuance protocol (Section 3.2), it is important for Privacy Pass deployments to mitigate the risk of abuse by malicious Origins.

For example, when a Client holds cross-Origin tokens for an Origin, it is possible for any Origin in the cross-Origin set to deplete that Client set of tokens. To prevent this from happening, tokens can be scoped to single Origins such that they can only be redeemed for a single Origin. Alternatively, if tokens are cross-Origin, Clients can use alternate methods to prevent many tokens from being redeemed at once. For example, if the Origin requests an excess of tokens, the Client could choose to not present any tokens for verification if a redemption had already occurred in a given time window.

8. References

8.1. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/rfc/rfc2119>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/rfc/rfc8174>.

8.2. Informative References

[CENTRALIZATION]
Nottingham, M., "Internet Consolidation: What can Standards Efforts Do?", Work in Progress, Internet-Draft, draft-nottingham-avoiding-internet-centralization-06, , <https://datatracker.ietf.org/doc/html/draft-nottingham-avoiding-internet-centralization-06>.
[CONSISTENCY]
Davidson, A., Finkel, M., Thomson, M., and C. A. Wood, "Key Consistency and Discovery", Work in Progress, Internet-Draft, draft-wood-key-consistency-03, , <https://datatracker.ietf.org/doc/html/draft-wood-key-consistency-03>.
[HIJK21]
Huang, S., Iyengar, S., Jeyaraman, S., Kushwah, S., Lee, C. K., Luo, Z., Mohassel, P., Raghunathan, A., Shaikh, S., Sung, Y. C., and A. Zhang, "PrivateStats: De-Identified Authenticated Logging at Scale", , <https://research.fb.com/privatestats>.
[HTTP-Authentication]
Pauly, T., Valdez, S., and C. A. Wood, "The Privacy Pass HTTP Authentication Scheme", Work in Progress, Internet-Draft, draft-ietf-privacypass-auth-scheme-06, , <https://datatracker.ietf.org/doc/html/draft-ietf-privacypass-auth-scheme-06>.
[ISSUANCE]
Celi, S., Davidson, A., Faz-Hernandez, A., Valdez, S., and C. A. Wood, "Privacy Pass Issuance Protocol", Work in Progress, Internet-Draft, draft-ietf-privacypass-protocol-06, , <https://datatracker.ietf.org/doc/html/draft-ietf-privacypass-protocol-06>.
[KLOR20]
Kreuter, B., Lepoint, T., Orrù, M., and M. Raykova, "Anonymous Tokens with Private Metadata Bit", Advances in Cryptology - CRYPTO 2020 pp. 308-336, DOI 10.1007/978-3-030-56784-2_11, , <https://doi.org/10.1007/978-3-030-56784-2_11>.
[PPEXT]
"Privacy Pass Browser Extension", n.d., <https://github.com/privacypass/challenge-bypass-extension>.
[PPSRV]
Sullivan, N., "Cloudflare Supports Privacy Pass", n.d., <https://blog.cloudflare.com/cloudflare-supports-privacy-pass/>.
[RATE-LIMITED]
Hendrickson, S., Iyengar, J., Pauly, T., Valdez, S., and C. A. Wood, "Rate-Limited Token Issuance Protocol", Work in Progress, Internet-Draft, draft-privacypass-rate-limit-tokens-03, , <https://datatracker.ietf.org/doc/html/draft-privacypass-rate-limit-tokens-03>.
[RFC6962]
Laurie, B., Langley, A., and E. Kasper, "Certificate Transparency", RFC 6962, DOI 10.17487/RFC6962, , <https://www.rfc-editor.org/rfc/rfc6962>.

Appendix A. Acknowledgements

The authors would like to thank Eric Kinnear, Scott Hendrickson, Tommy Pauly, Christopher Patton, Benjamin Schwartz, Steven Valdez and other members of the Privacy Pass Working Group for many helpful contributions to this document.

Authors' Addresses

Alex Davidson
LIP
Lisbon
Portugal
Jana Iyengar
Fastly
Christopher A. Wood
Cloudflare
101 Townsend St
San Francisco,
United States of America