Internet-Draft | The OAuth 2.1 Authorization Framework | October 2021 |
Hardt, et al. | Expires 8 April 2022 | [Page] |
The OAuth 2.1 authorization framework enables a third-party application to obtain limited access to an HTTP service, either on behalf of a resource owner by orchestrating an approval interaction between the resource owner and an authorization service, or by allowing the third-party application to obtain access on its own behalf. This specification replaces and obsoletes the OAuth 2.0 Authorization Framework described in RFC 6749.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 8 April 2022.¶
Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
In the traditional client-server authentication model, the client requests an access-restricted resource (protected resource) on the server by authenticating with the server using the resource owner's credentials. In order to provide third-party applications access to restricted resources, the resource owner shares its credentials with the third party. This creates several problems and limitations:¶
OAuth addresses these issues by introducing an authorization layer and separating the role of the client from that of the resource owner. In OAuth, the client requests access to resources controlled by the resource owner and hosted by the resource server. Instead of using the resource owner's credentials to access protected resources, the client obtains an access token - a credential representing a specific set of access attributes such as scope and lifetime. Access tokens are issued to clients by an authorization server with the approval of the resource owner. The client uses the access token to access the protected resources hosted by the resource server.¶
For example, an end-user (resource owner) can grant a printing service (client) access to their protected photos stored at a photo- sharing service (resource server), without sharing their username and password with the printing service. Instead, they authenticate directly with a server trusted by the photo-sharing service (authorization server), which issues the printing service delegation- specific credentials (access token).¶
This specification is designed for use with HTTP ([RFC7231]). The use of OAuth over any protocol other than HTTP is out of scope.¶
Since the publication of the OAuth 2.0 Authorization Framework ([RFC6749]) in October 2012, it has been updated by OAuth 2.0 for Native Apps ([RFC8252]), OAuth Security Best Current Practice ([I-D.ietf-oauth-security-topics]), and OAuth 2.0 for Browser-Based Apps ([I-D.ietf-oauth-browser-based-apps]). The OAuth 2.0 Authorization Framework: Bearer Token Usage ([RFC6750]) has also been updated with ([I-D.ietf-oauth-security-topics]). This Standards Track specification consolidates the information in all of these documents and removes features that have been found to be insecure in [I-D.ietf-oauth-security-topics].¶
OAuth defines four roles:¶
The interaction between the authorization server and resource server is beyond the scope of this specification, however several extensions have been defined to provide an option for interoperability between resource servers and authorization servers. The authorization server may be the same server as the resource server or a separate entity. A single authorization server may issue access tokens accepted by multiple resource servers.¶
The abstract OAuth 2.1 flow illustrated in Figure 1 describes the interaction between the four roles and includes the following steps:¶
The preferred method for the client to obtain an authorization grant from the resource owner (depicted in steps (1) and (2)) is to use the authorization server as an intermediary, which is illustrated in Figure 3 in Section 4.1.¶
Access tokens are credentials used to access protected resources. An access token is a string representing an authorization issued to the client. The string is considered opaque to the client, even if it has a structure. Depending on the authorization server, the access token string may be parseable by the resource server, such as when using the JSON Web Token Profile for Access Tokens ([I-D.ietf-oauth-access-token-jwt]).¶
Access tokens represent specific scopes and durations of access, granted by the resource owner, and enforced by the resource server and authorization server.¶
The token may be used by the RS to retrieve the authorization information, or the token may self-contain the authorization information in a verifiable manner (i.e., a token string consisting of a signed data payload). One example of a token retrieval mechanism is Token Introspection [RFC7662], in which the RS calls an endpoint on the AS to validate the token presented by the client. One example of a structured token format is [I-D.ietf-oauth-access-token-jwt], a method of encoding access token data as a JSON Web Token [RFC7519].¶
Additional authentication credentials, which are beyond the scope of this specification, may be required in order for the client to use an access token. This is typically referred to as a sender-constrained access token, such as Mutual TLS Access Tokens [RFC8705].¶
The access token provides an abstraction layer, replacing different authorization constructs (e.g., username and password) with a single token understood by the resource server. This abstraction enables issuing access tokens more restrictive than the authorization grant used to obtain them, as well as removing the resource server's need to understand a wide range of authentication methods.¶
Access tokens can have different formats, structures, and methods of utilization (e.g., cryptographic properties) based on the resource server security requirements. Access token attributes and the methods used to access protected resources may be extended beyond what is described in this specification.¶
Access tokens (as well as any confidential access token attributes) MUST be kept confidential in transit and storage, and only shared among the authorization server, the resource servers the access token is valid for, and the client to whom the access token is issued. Access token credentials MUST only be transmitted using TLS as described in Section 1.5 with server authentication as defined by [RFC2818].¶
The authorization server MUST ensure that access tokens cannot be generated, modified, or guessed to produce valid access tokens by unauthorized parties.¶
Whenever Transport Layer Security (TLS) is used by this specification, the appropriate version (or versions) of TLS will vary over time, based on the widespread deployment and known security vulnerabilities. Refer to [BCP195] for up to date recommendations on transport layer security.¶
Implementations MAY also support additional transport-layer security mechanisms that meet their security requirements.¶
This specification makes extensive use of HTTP redirections, in which the client or the authorization server directs the resource owner's user agent to another destination. While the examples in this specification show the use of the HTTP 302 status code, any other method available via the user agent to accomplish this redirection, with the exception of HTTP 307, is allowed and is considered to be an implementation detail. See Section 7.7.2 for details.¶
OAuth 2.1 provides a rich authorization framework with well-defined security properties.¶
This specification leaves a few required components partially or fully undefined (e.g., client registration, authorization server capabilities, endpoint discovery). Some of these behaviors are defined in optional extensions which implementations can choose to use, such as:¶
Please refer to Appendix C for a list of current known extensions at the time of this publication.¶
OAuth 2.1 is compatible with OAuth 2.0 with the extensions and restrictions from known best current practices applied. Specifically, features not specified in OAuth 2.0 core, such as PKCE, are required in OAuth 2.1. Additionally, some features available in OAuth 2.0, such as the Implicit or Resource Owner Credentials grant types, are not specified in OAuth 2.1. Furthermore, some behaviors allowed in OAuth 2.0 are restricted in OAuth 2.1, such as the strict string matching of redirect URIs required by OAuth 2.1.¶
See Section 10 for more details on the differences from OAuth 2.0.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234]. Additionally, the rule URI-reference is included from "Uniform Resource Identifier (URI): Generic Syntax" [RFC3986].¶
Certain security-related terms are to be understood in the sense defined in [RFC4949]. These terms include, but are not limited to, "attack", "authentication", "authorization", "certificate", "confidentiality", "credential", "encryption", "identity", "sign", "signature", "trust", "validate", and "verify".¶
The term "payload" is to be interpreted as described in Section 3.3 of [RFC7231].¶
The term "user agent" is to be interpreted as described in [RFC7230].¶
Unless otherwise noted, all the protocol parameter names and values are case sensitive.¶
Before initiating the protocol, the client must establish its registration with the authorization server. The means through which the client registers with the authorization server are beyond the scope of this specification but typically involve the client developer manually registering the client at the authorization server's website after creating an account and agreeing to the service's Terms of Service, or by using Dynamic Client Registration ([RFC7591]).¶
Client registration does not require a direct interaction between the client and the authorization server. When supported by the authorization server, registration can rely on other means for establishing trust and obtaining the required client properties (e.g., redirect URI, client type). For example, registration can be accomplished using a self-issued or third-party-issued assertion, or by the authorization server performing client discovery using a trusted channel.¶
When registering a client, the client developer SHALL:¶
Dynamic Client Registration ([RFC7591]) defines a common general data model for clients that may be used even with manual client registration.¶
OAuth 2.1 defines three client types based on their ability to authenticate securely with the authorization server as well as the authorization server's assurance of the client's identity.¶
Any clients with credentials MUST take precautions to prevent leakage and abuse of their credentials.¶
Authorization servers SHOULD consider the level of confidence in a client's identity when deciding whether they allow such a client access to more critical functions, such as the Client Credentials grant type.¶
A single client_id
MUST NOT be treated as more than one type of client.¶
For example, a client that has been registered at the authorization server by a registered application developer, where the client is expected to be run as server-side code, would be considered a confidential client. A client that runs on an end-user's device, and uses Dynamic Client Registration ([RFC7591]) to establish credentials the first time the app runs, would be considered a credentialed client. An application deployed as a single-page app on a static web host would be considered a public client.¶
This specification has been designed around the following client profiles:¶
The authorization server issues the registered client a client identifier - a unique string representing the registration information provided by the client. The client identifier is not a secret; it is exposed to the resource owner and MUST NOT be used alone for client authentication. The client identifier is unique to the authorization server.¶
The client identifier string size is left undefined by this specification. The client should avoid making assumptions about the identifier size. The authorization server SHOULD document the size of any identifier it issues.¶
Authorization servers SHOULD NOT allow clients to choose or influence their
client_id
value. See Section 7.6 for details.¶
The client redirection endpoint (also referred to as "redirect endpoint") is the URI of the client that the authorization server redirects the user agent back to after completing its interaction with the resource owner.¶
The authorization server redirects the user agent to one of the client's redirection endpoints previously established with the authorization server during the client registration process.¶
The redirect URI MUST be an absolute URI as defined by [RFC3986] Section 4.3. The endpoint URI MAY include an "application/x-www-form-urlencoded" formatted (per Appendix B) query component ([RFC3986] Section 3.4), which MUST be retained when adding additional query parameters. The endpoint URI MUST NOT include a fragment component.¶
The redirection endpoint SHOULD require the use of TLS as described
in Section 1.5 when the requested response type is code
,
or when the redirection request will result in the transmission of
sensitive credentials over an open network.
If TLS is not available, the authorization server
SHOULD warn the resource owner about the insecure endpoint prior to
redirection (e.g., display a message during the authorization
request).¶
Authorization servers MUST require clients to register their complete redirect URI (including the path component) and reject authorization requests that specify a redirect URI that doesn't exactly match one that was registered; the exception is loopback redirects, where an exact match is required except for the port URI component.¶
For private-use URI scheme-based redirect URIs, authorization servers
SHOULD enforce the requirement in Section 8.3.1 that clients use
schemes that are reverse domain name based. At a minimum, any
private-use URI scheme that doesn't contain a period character (.
)
SHOULD be rejected.¶
The client MAY use the state
request parameter to achieve per-request
customization if needed rather than varying the redirect URI per request.¶
The authorization server MAY allow the client to register multiple redirect URIs.¶
Without requiring registration of redirect URIs, attackers can use the authorization endpoint as an open redirector as described in Section 7.18.¶
If multiple redirect URIs have been registered, the client MUST
include a redirect URI with the authorization request using the
redirect_uri
request parameter.¶
If an authorization request fails validation due to a missing, invalid, or mismatching redirect URI, the authorization server SHOULD inform the resource owner of the error and MUST NOT automatically redirect the user agent to the invalid redirect URI.¶
The redirection request to the client's endpoint typically results in an HTML document response, processed by the user agent. If the HTML response is served directly as the result of the redirection request, any script included in the HTML document will execute with full access to the redirect URI and the credentials (e.g. authorization code) it contains. Additionally, the request URL containing the authorization code may be sent in the HTTP Referer header to any embedded images, stylesheets and other elements loaded in the page.¶
The client SHOULD NOT include any third-party scripts (e.g., third- party analytics, social plug-ins, ad networks) in the redirection endpoint response. Instead, it SHOULD extract the credentials from the URI and redirect the user agent again to another endpoint without exposing the credentials (in the URI or elsewhere). If third-party scripts are included, the client MUST ensure that its own scripts (used to extract and remove the credentials from the URI) will execute first.¶
If the client is confidential or credentialed, the authorization server MAY accept any form of client authentication meeting its security requirements (e.g., password, public/private key pair).¶
The authorization server MUST authenticate the client whenever possible. If the authorization server cannot authenticate the client due to the client's nature, the authorization server SHOULD utilize other means to protect resource owners from such potentially malicious clients. For example, the authorization server can engage the resource owner to assist in identifying the client and its origin.¶
It is RECOMMENDED to use asymmetric (public-key based) methods for client authentication such as mTLS [RFC8705] or "private_key_jwt" [OpenID]. When asymmetric methods for client authentication are used, authorization servers do not need to store sensitive symmetric keys, making these methods more robust against a number of attacks.¶
The authorization server MAY establish a client authentication method with public clients, which converts them to credentialed clients. However, the authorization server MUST NOT rely on credentialed client authentication for the purpose of identifying the client.¶
The client MUST NOT use more than one authentication method in each request to prevent a conflict of which authentication mechanism is authoritative for the request.¶
Clients in possession of a client secret, sometimes known as a client password,
MAY use the HTTP Basic
authentication scheme as defined in [RFC7235] to authenticate with
the authorization server. The client identifier is encoded using the
application/x-www-form-urlencoded
encoding algorithm per
Appendix B, and the encoded value is used as the username; the client
secret is encoded using the same algorithm and used as the
password. The authorization server MUST support the HTTP Basic
authentication scheme for authenticating clients that were issued a
client secret.¶
For example (with extra line breaks for display purposes only):¶
Authorization: Basic czZCaGRSa3F0Mzo3RmpmcDBaQnIxS3REUmJuZlZkbUl3¶
In addition to that, the authorization server MAY support including the client credentials in the request-body using the following parameters:¶
Including the client credentials in the request-body using the two parameters is NOT RECOMMENDED and SHOULD be limited to clients unable to directly utilize the HTTP Basic authentication scheme (or other password-based HTTP authentication schemes). The parameters can only be transmitted in the request-body and MUST NOT be included in the request URI.¶
For example, a request to refresh an access token (Section 4.3) using the body parameters (with extra line breaks for display purposes only):¶
POST /token HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded grant_type=refresh_token&refresh_token=tGzv3JOkF0XG5Qx2TlKWIA &client_id=s6BhdRkqt3&client_secret=7Fjfp0ZBr1KtDRbnfVdmIw¶
The authorization server MUST require the use of TLS as described in Section 1.5 when sending requests using password authentication.¶
Since this client authentication method involves a password, the authorization server MUST protect any endpoint utilizing it against brute force attacks.¶
The authorization server MAY support any suitable authentication scheme matching its security requirements. When using other authentication methods, the authorization server MUST define a mapping between the client identifier (registration record) and authentication scheme.¶
Some additional authentication methods such as mTLS [RFC8705] and "private_key_jwt" [OpenID] are defined in the "OAuth Token Endpoint Authentication Methods" registry, and may be useful as generic client authentication methods beyond the specific use of protecting the token endpoint.¶
This specification does not exclude the use of unregistered clients. However, the use of such clients is beyond the scope of this specification and requires additional security analysis and review of its interoperability impact.¶
The authorization process utilizes two authorization server endpoints (HTTP resources):¶
As well as one client endpoint:¶
Not every authorization grant type utilizes both endpoints. Extension grant types MAY define additional endpoints as needed.¶
The token endpoint is used by the client to obtain an access token using a grant such as those described in Section 4 and Section 4.3.¶
The means through which the client obtains the location of the token endpoint are beyond the scope of this specification, but the location is typically provided in the service documentation and configured during development of the client, or provided in the authorization server's metadata document ([RFC8414]) and fetched programmatically at runtime.¶
The endpoint URI MAY include an application/x-www-form-urlencoded
formatted (per Appendix B) query component ([RFC3986] Section 3.4)
and MUST NOT include a fragment component.¶
Since requests to the token endpoint result in the transmission of clear-text credentials (in the HTTP request and response), the authorization server MUST require the use of TLS as described in Section 1.5 when sending requests to the token endpoint.¶
The client MUST use the HTTP POST
method when making access token
requests.¶
The authorization server MUST ignore unrecognized request parameters.¶
Parameters sent without a value MUST be treated as if they were omitted from the request. Request and response parameters defined by this specification MUST NOT be included more than once.¶
Confidential or credentialed clients MUST authenticate with the authorization server as described in Section 2.4 when making requests to the token endpoint.¶
Client authentication is used for:¶
The client makes a request to the token endpoint by sending the
following parameters using the application/x-www-form-urlencoded
format per Appendix B with a character encoding of UTF-8 in the HTTP
request payload:¶
authorization_code
, refresh_token
, and client_credentials
.
The grant type determines the further parameters required or supported by the token request. The
details of those grant types are defined below.¶
Confidential or credentialed clients MUST authenticate with the authorization server as described in Section 3.2.1.¶
For example, the client makes the following HTTP request using TLS (with extra line breaks for display purposes only):¶
POST /token HTTP/1.1 Host: server.example.com Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW Content-Type: application/x-www-form-urlencoded grant_type=authorization_code&code=SplxlOBeZQQYbYS6WxSbIA &redirect_uri=https%3A%2F%2Fclient%2Eexample%2Ecom%2Fcb &code_verifier=3641a2d12d66101249cdf7a79c000c1f8c05d2aafcf14bf146497bed¶
The authorization server MUST:¶
Further grant type specific processing rules apply and are specified with the respective grant type.¶
The authorization and token endpoints allow the client to specify the
scope of the access request using the scope
request parameter. In
turn, the authorization server uses the scope
response parameter to
inform the client of the scope of the access token issued.¶
The value of the scope parameter is expressed as a list of space- delimited, case-sensitive strings. The strings are defined by the authorization server. If the value contains multiple space-delimited strings, their order does not matter, and each string adds an additional access range to the requested scope.¶
scope = scope-token *( SP scope-token ) scope-token = 1*( %x21 / %x23-5B / %x5D-7E )¶
The authorization server MAY fully or partially ignore the scope
requested by the client, based on the authorization server policy or
the resource owner's instructions. If the issued access token scope
is different from the one requested by the client, the authorization
server MUST include the scope
response parameter to inform the
client of the actual scope granted.¶
If the client omits the scope parameter when requesting authorization, the authorization server MUST either process the request using a pre-defined default value or fail the request indicating an invalid scope. The authorization server SHOULD document its scope requirements and default value (if defined).¶
If the access token request is valid and authorized, the authorization server issues an access token and optional refresh token.¶
If the request client authentication failed or is invalid, the authorization server returns an error response as described in Section 3.2.3.1.¶
The authorization server issues an access token and optional refresh
token by creating an HTTP response body using the application/json
media type as defined by [RFC8259] with the following parameters
and an HTTP 200 (OK) status code:¶
3600
denotes that the access token will
expire in one hour from the time the response was generated.
If omitted, the authorization server SHOULD provide the
expiration time via other means or document the default value.¶
Authorization servers SHOULD determine, based on a risk assessment and their own policies, whether to issue refresh tokens to a certain client. If the authorization server decides not to issue refresh tokens, the client MAY obtain new access tokens by starting the OAuth flow over, for example initiating a new authorization code request. In such a case, the authorization server may utilize cookies and persistent grants to optimize the user experience.¶
If refresh tokens are issued, those refresh tokens MUST be bound to the scope and resource servers as consented by the resource owner. This is to prevent privilege escalation by the legitimate client and reduce the impact of refresh token leakage.¶
The parameters are serialized into a JavaScript Object Notation (JSON) structure by adding each parameter at the highest structure level. Parameter names and string values are included as JSON strings. Numerical values are included as JSON numbers. The order of parameters does not matter and can vary.¶
The authorization server MUST include the HTTP Cache-Control
response header field [RFC7234] with a value of no-store
in any
response containing tokens, credentials, or other sensitive
information.¶
For example:¶
HTTP/1.1 200 OK Content-Type: application/json Cache-Control: no-store { "access_token":"2YotnFZFEjr1zCsicMWpAA", "token_type":"Bearer", "expires_in":3600, "refresh_token":"tGzv3JOkF0XG5Qx2TlKWIA", "example_parameter":"example_value" }¶
The client MUST ignore unrecognized value names in the response. The sizes of tokens and other values received from the authorization server are left undefined. The client should avoid making assumptions about value sizes. The authorization server SHOULD document the size of any value it issues.¶
The authorization server responds with an HTTP 400 (Bad Request) status code (unless specified otherwise) and includes the following parameters with the response:¶
REQUIRED. A single ASCII [USASCII] error code from the following:¶
code_verifier
although no
code_challenge
was sent in the authorization request,
or is otherwise malformed.¶
Authorization
request header field, the authorization server MUST
respond with an HTTP 401 (Unauthorized) status code and
include the WWW-Authenticate
response header field
matching the authentication scheme used by the client.¶
Values for the error
parameter MUST NOT include characters
outside the set %x20-21 / %x23-5B / %x5D-7E.¶
error_description
parameter MUST NOT include
characters outside the set %x20-21 / %x23-5B / %x5D-7E.¶
error_uri
parameter MUST conform to the
URI-reference syntax and thus MUST NOT include characters
outside the set %x21 / %x23-5B / %x5D-7E.¶
The parameters are included in the payload of the HTTP response
using the application/json
media type as defined by [RFC7159]. The
parameters are serialized into a JSON structure by adding each
parameter at the highest structure level. Parameter names and string
values are included as JSON strings. Numerical values are included
as JSON numbers. The order of parameters does not matter and can
vary.¶
For example:¶
HTTP/1.1 400 Bad Request Content-Type: application/json Cache-Control: no-store { "error":"invalid_request" }¶
The client accesses protected resources by presenting the access token to the resource server. The resource server MUST validate the access token and ensure that it has not expired and that its scope covers the requested resource. The methods used by the resource server to validate the access token (as well as any error responses) are beyond the scope of this specification, but generally involve an interaction or coordination between the resource server and the authorization server. For example, when the resource server and authorization server are colocated or are part of the same system, they may share a database or other storage; when the two components are operated independently, they may use Token Introspection [RFC7662] or a structured access token format such as a JWT [I-D.ietf-oauth-access-token-jwt].¶
The method in which the client utilizes the access token to
access protected resources at the resource server depends on the type of access
token issued by the authorization server. Typically, it involves
using the HTTP Authorization
request header field [RFC7235] with an
authentication scheme defined by the specification of the access
token type used, such as Bearer
, defined below.¶
The access token type provides the client with the information required to successfully utilize the access token to make a protected resource request (along with type-specific attributes). The client MUST NOT use an access token if it does not understand the token type.¶
For example, the Bearer
token type defined in this specification is utilized
by simply including the access token string in the request:¶
GET /resource/1 HTTP/1.1 Host: example.com Authorization: Bearer mF_9.B5f-4.1JqM¶
The above example is provided for illustration purposes only.¶
Each access token type definition specifies the additional attributes
(if any) sent to the client together with the access_token
response
parameter. It also defines the HTTP authentication method used to
include the access token when making a protected resource request.¶
A Bearer Token is a security token with the property that any party in possession of the token (a "bearer") can use the token in any way that any other party in possession of it can. Using a bearer token does not require a bearer to prove possession of cryptographic key material (proof-of-possession).¶
Bearer tokens may be enhanced with proof-of-possession specifications such as mTLS [RFC8705] to provide proof-of-possession characteristics.¶
This section defines two methods of sending Bearer tokens in resource requests to resource servers. Clients MUST use one of the two methods defined below, and MUST NOT use more than one method to transmit the token in each request.¶
In particular, clients MUST NOT send the access token in a URI query parameter, and resource servers MUST ignore access tokens in a URI query parameter.¶
When sending the access token in the HTTP request payload, the
client adds the access token to the request-body using the
access_token
parameter. The client MUST NOT use this method unless
all of the following conditions are met:¶
Content-Type
header
field set to application/x-www-form-urlencoded
.¶
application/x-www-form-urlencoded
content-type as defined by
HTML 4.01 [W3C.REC-html401-19991224].¶
GET
method MUST NOT be used.¶
The payload MAY include other request-specific parameters, in
which case the access_token
parameter MUST be properly separated
from the request-specific parameters using &
character(s) (ASCII
code 38).¶
For example, the client makes the following HTTP request using transport-layer security:¶
POST /resource HTTP/1.1 Host: server.example.com Content-Type: application/x-www-form-urlencoded access_token=mF_9.B5f-4.1JqM¶
The application/x-www-form-urlencoded
method SHOULD NOT be used
except in application contexts where participating clients do not
have access to the Authorization
request header field. Resource
servers MAY support this method.¶
If the protected resource request does not include authentication
credentials or does not contain an access token that enables access
to the protected resource, the resource server MUST include the HTTP
WWW-Authenticate
response header field; it MAY include it in
response to other conditions as well. The WWW-Authenticate
header
field uses the framework defined by HTTP/1.1 [RFC7235].¶
All challenges for this token type MUST use the auth-scheme
value Bearer
. This scheme MUST be followed by one or more
auth-param values. The auth-param attributes used or defined by this
specification for this token type are as follows. Other auth-param
attributes MAY be used as well.¶
A realm
attribute MAY be included to indicate the scope of
protection in the manner described in HTTP/1.1 [RFC7235]. The
realm
attribute MUST NOT appear more than once.¶
The scope
attribute is defined in Section 3.2.2.1. The
scope
attribute is a space-delimited list of case-sensitive scope
values indicating the required scope of the access token for
accessing the requested resource. scope
values are implementation
defined; there is no centralized registry for them; allowed values
are defined by the authorization server. The order of scope
values
is not significant. In some cases, the scope
value will be used
when requesting a new access token with sufficient scope of access to
utilize the protected resource. Use of the scope
attribute is
OPTIONAL. The scope
attribute MUST NOT appear more than once. The
scope
value is intended for programmatic use and is not meant to be
displayed to end-users.¶
Two example scope values follow; these are taken from the OpenID Connect [OpenID.Messages] and the Open Authentication Technology Committee (OATC) Online Multimedia Authorization Protocol [OMAP] OAuth 2.0 use cases, respectively:¶
scope="openid profile email" scope="urn:example:channel=HBO&urn:example:rating=G,PG-13"¶
If the protected resource request included an access token and failed
authentication, the resource server SHOULD include the error
attribute to provide the client with the reason why the access
request was declined. The parameter value is described in
Section 5.2.3. In addition, the resource server MAY include the
error_description
attribute to provide developers a human-readable
explanation that is not meant to be displayed to end-users. It also
MAY include the error_uri
attribute with an absolute URI
identifying a human-readable web page explaining the error. The
error
, error_description
, and error_uri
attributes MUST NOT
appear more than once.¶
Values for the scope
attribute (specified in Appendix A.4)
MUST NOT include characters outside the set %x21 / %x23-5B
/ %x5D-7E for representing scope values and %x20 for delimiters
between scope values. Values for the error
and error_description
attributes (specified in Appendixes A.7 and A.8) MUST
NOT include characters outside the set %x20-21 / %x23-5B / %x5D-7E.
Values for the error_uri
attribute (specified in Appendix A.9 of)
MUST conform to the URI-reference syntax and thus MUST NOT
include characters outside the set %x21 / %x23-5B / %x5D-7E.¶
For example, in response to a protected resource request without authentication:¶
HTTP/1.1 401 Unauthorized WWW-Authenticate: Bearer realm="example"¶
And in response to a protected resource request with an authentication attempt using an expired access token:¶
HTTP/1.1 401 Unauthorized WWW-Authenticate: Bearer realm="example", error="invalid_token", error_description="The access token expired"¶
When a request fails, the resource server responds using the appropriate HTTP status code (typically, 400, 401, 403, or 405) and includes one of the following error codes in the response:¶
The request requires higher privileges (scopes) than provided by the scopes granted to the client and represented by the access token.¶
The resource server SHOULD respond with the HTTP
403 (Forbidden) status code and MAY include the scope
attribute with the scope necessary to access the protected
resource.¶
If the request lacks any authentication information (e.g., the client was unaware that authentication is necessary or attempted using an unsupported authentication method), the resource server SHOULD NOT include an error code or other error information.¶
For example:¶
HTTP/1.1 401 Unauthorized WWW-Authenticate: Bearer realm="example"¶
If a resource access request fails, the resource server SHOULD inform the client of the error. The method by which the resource server does this is determined by the particular token type, such as the description of Bearer tokens in Section 5.2.3.¶
[RFC6750] establishes a common registry in Section 11.4 for error values to be shared among OAuth token authentication schemes.¶
New authentication schemes designed primarily for OAuth token authentication SHOULD define a mechanism for providing an error status code to the client, in which the error values allowed are registered in the error registry established by this specification.¶
Such schemes MAY limit the set of valid error codes to a subset of
the registered values. If the error code is returned using a named
parameter, the parameter name SHOULD be error
.¶
Other schemes capable of being used for OAuth token authentication, but not primarily designed for that purpose, MAY bind their error values to the registry in the same manner.¶
New authentication schemes MAY choose to also specify the use of the
error_description
and error_uri
parameters to return error
information in a manner parallel to their usage in this
specification.¶
Access token types can be defined in one of two ways: registered in the Access Token Types registry (following the procedures in Section 11.1 of [RFC6749]), or by using a unique absolute URI as its name.¶
Types utilizing a URI name SHOULD be limited to vendor-specific implementations that are not commonly applicable, and are specific to the implementation details of the resource server where they are used.¶
All other types MUST be registered. Type names MUST conform to the
type-name ABNF. If the type definition includes a new HTTP
authentication scheme, the type name SHOULD be identical to the HTTP
authentication scheme name (as defined by [RFC2617]). The token type
example
is reserved for use in examples.¶
type-name = 1*name-char name-char = "-" / "." / "_" / DIGIT / ALPHA¶
New request or response parameters for use with the authorization endpoint or the token endpoint are defined and registered in the OAuth Parameters registry following the procedure in Section 11.2 of [RFC6749].¶
Parameter names MUST conform to the param-name ABNF, and parameter values syntax MUST be well-defined (e.g., using ABNF, or a reference to the syntax of an existing parameter).¶
param-name = 1*name-char name-char = "-" / "." / "_" / DIGIT / ALPHA¶
Unregistered vendor-specific parameter extensions that are not commonly applicable and that are specific to the implementation details of the authorization server where they are used SHOULD utilize a vendor-specific prefix that is not likely to conflict with other registered values (e.g., begin with 'companyname_').¶
New response types for use with the authorization endpoint are defined and registered in the Authorization Endpoint Response Types registry following the procedure in Section 11.3 of [RFC6749]. Response type names MUST conform to the response-type ABNF.¶
response-type = response-name *( SP response-name ) response-name = 1*response-char response-char = "_" / DIGIT / ALPHA¶
If a response type contains one or more space characters (%x20), it is compared as a space-delimited list of values in which the order of values does not matter. Only one order of values can be registered, which covers all other arrangements of the same set of values.¶
For example, an extension can define and register the code other_token
response type. Once registered, the same combination cannot be registered
as other_token code
, but both values can be used to
denote the same response type.¶
In cases where protocol extensions (i.e., access token types, extension parameters, or extension grant types) require additional error codes to be used with the authorization code grant error response (Section 4.1.2.1), the token error response (Section 3.2.3.1), or the resource access error response (Section 5.3), such error codes MAY be defined.¶
Extension error codes MUST be registered (following the procedures in Section 11.4 of [RFC6749]) if the extension they are used in conjunction with is a registered access token type, a registered endpoint parameter, or an extension grant type. Error codes used with unregistered extensions MAY be registered.¶
Error codes MUST conform to the error ABNF and SHOULD be prefixed by
an identifying name when possible. For example, an error identifying
an invalid value set to the extension parameter example
SHOULD be
named example_invalid
.¶
error = 1*error-char error-char = %x20-21 / %x23-5B / %x5D-7E¶
As a flexible and extensible framework, OAuth's security considerations depend on many factors. The following sections provide implementers with security guidelines focused on the three client profiles described in Section 2.1: web application, browser-based application, and native application.¶
A comprehensive OAuth security model and analysis, as well as background for the protocol design, is provided by [RFC6819] and [I-D.ietf-oauth-security-topics].¶
The following list presents several common threats against protocols utilizing some form of tokens. This list of threats is based on NIST Special Publication 800-63 [NIST800-63].¶
An attacker may generate a bogus access token or modify the token contents (such as the authentication or attribute statements) of an existing token, causing the resource server to grant inappropriate access to the client. For example, an attacker may modify the token to extend the validity period; a malicious client may modify the assertion to gain access to information that they should not be able to view.¶
Access tokens may contain authentication and attribute statements that include sensitive information.¶
An attacker uses an access token generated for consumption by one resource server to gain access to a different resource server that mistakenly believes the token to be for it.¶
An attacker attempts to use an access token that has already been used with that resource server in the past.¶
A large range of threats can be mitigated by protecting the contents of the access token by using a digital signature.¶
Alternatively, a bearer token can contain a reference to authorization information, rather than encoding the information directly. Such references MUST be infeasible for an attacker to guess; using a reference may require an extra interaction between a server and the access token issuer to resolve the reference to the authorization information. The mechanics of such an interaction are not defined by this specification.¶
This document does not specify the encoding or the contents of the access token; hence, detailed recommendations about the means of guaranteeing access token integrity protection are outside the scope of this specification. The access token integrity protection MUST be sufficient to prevent the token from being modified. One example of an encoding and signing mechanism for access tokens is described in [I-D.ietf-oauth-access-token-jwt].¶
To deal with access token redirects, it is important for the authorization server to include the identity of the intended recipients (the audience), typically a single resource server (or a list of resource servers), in the token. Restricting the use of the token to a specific scope is also RECOMMENDED.¶
The authorization server MUST implement TLS as described in Which version(s) ought to be implemented will vary over time and will depend on the widespread deployment and known security vulnerabilities at the time of implementation. Refer to Section 1.5.[BCP195] for up to date recommendations on transport layer security.¶
To protect against access token disclosure, confidentiality protection MUST be applied using TLS with a ciphersuite that provides confidentiality and integrity protection. This requires that the communication interaction between the client and the authorization server, as well as the interaction between the client and the resource server, utilize confidentiality and integrity protection. Since TLS is mandatory to implement and to use with this specification, it is the preferred approach for preventing token disclosure via the communication channel. For those cases where the client is prevented from observing the contents of the access token, token encryption MUST be applied in addition to the usage of TLS protection. As a further defense against token disclosure, the client MUST validate the TLS certificate chain when making requests to protected resources, including checking the Certificate Revocation List (CRL) [RFC5280].¶
If cookies are transmitted without TLS protection, any information contained in them is at risk of disclosure. Therefore, Bearer tokens MUST NOT be stored in cookies that can be sent in the clear, as any information in them is at risk of disclosure. See "HTTP State Management Mechanism" [RFC6265] for security considerations about cookies.¶
In some deployments, including those utilizing load balancers, the TLS connection to the resource server terminates prior to the actual server that provides the resource. This could leave the token unprotected between the front-end server where the TLS connection terminates and the back-end server that provides the resource. In such deployments, sufficient measures MUST be employed to ensure confidentiality of the access token between the front-end and back-end servers; encryption of the token is one such possible measure.¶
To deal with access token capture and replay, the following recommendations are made: First, the lifetime of the token MUST be limited; one means of achieving this is by putting a validity time field inside the protected part of the token. Note that using short-lived tokens reduces the impact of them being leaked. Second, confidentiality protection of the exchanges between the client and the authorization server and between the client and the resource server MUST be applied. As a consequence, no eavesdropper along the communication path is able to observe the token exchange. Consequently, such an on-path adversary cannot replay the token. Furthermore, when presenting the token to a resource server, the client MUST verify the identity of that resource server, as per [BCP195] and Section 3.1 of "HTTP Over TLS" [RFC2818]. Note that the client MUST validate the TLS certificate chain when making these requests to protected resources. Presenting the token to an unauthenticated and unauthorized resource server or failing to validate the certificate chain will allow adversaries to steal the token and gain unauthorized access to protected resources.¶
Client implementations MUST ensure that bearer tokens are not leaked to unintended parties, as they will be able to use them to gain access to protected resources. This is the primary security consideration when using bearer tokens and underlies all the more specific recommendations that follow.¶
The client MUST validate the TLS certificate chain when making requests to protected resources. Failing to do so may enable DNS hijacking attacks to steal the token and gain unintended access.¶
Clients MUST always use TLS (https) or equivalent transport security when making requests with bearer tokens. Failing to do so exposes the token to numerous attacks that could give attackers unintended access.¶
Authorization servers SHOULD issue short-lived bearer tokens, particularly when issuing tokens to clients that run within a web browser or other environments where information leakage may occur. Using short-lived bearer tokens can reduce the impact of them being leaked.¶
Authorization servers SHOULD issue bearer tokens that contain an audience restriction, scoping their use to the intended relying party or set of relying parties.¶
Bearer tokens MUST NOT be passed in page URLs (for example, as query string parameters). Instead, bearer tokens SHOULD be passed in HTTP message headers or message bodies for which confidentiality measures are taken. Browsers, web servers, and other software may not adequately secure URLs in the browser history, web server logs, and other data structures. If bearer tokens are passed in page URLs, attackers might be able to steal them from the history data, logs, or other unsecured locations.¶
A sender-constrained access token scopes the applicability of an access token to a certain sender. This sender is obliged to demonstrate knowledge of a certain secret as prerequisite for the acceptance of that access token at the recipient (e.g., a resource server).¶
Authorization and resource servers SHOULD use mechanisms for sender- constrained access tokens to prevent token replay as described in Section 4.8.1.1.2 of [I-D.ietf-oauth-security-topics]. The use of Mutual TLS for OAuth 2.0 [RFC8705] is RECOMMENDED.¶
It is RECOMMENDED to use end-to-end TLS. If TLS traffic needs to be terminated at an intermediary, refer to Section 4.11 of [I-D.ietf-oauth-security-topics] for further security advice.¶
The privileges associated with an access token SHOULD be restricted to the minimum required for the particular application or use case. This prevents clients from exceeding the privileges authorized by the resource owner. It also prevents users from exceeding their privileges authorized by the respective security policy. Privilege restrictions also help to reduce the impact of access token leakage.¶
In particular, access tokens SHOULD be restricted to certain resource
servers (audience restriction), preferably to a single resource
server. To put this into effect, the authorization server associates
the access token with certain resource servers and every resource
server is obliged to verify, for every request, whether the access
token sent with that request was meant to be used for that particular
resource server. If not, the resource server MUST refuse to serve
the respective request. Clients and authorization servers MAY
utilize the parameters scope
or resource
as specified in
this document and [RFC8707], respectively, to
determine the resource server they want to access.¶
Additionally, access tokens SHOULD be restricted to certain resources
and actions on resource servers or resources. To put this into
effect, the authorization server associates the access token with the
respective resource and actions and every resource server is obliged
to verify, for every request, whether the access token sent with that
request was meant to be used for that particular action on the
particular resource. If not, the resource server must refuse to
serve the respective request. Clients and authorization servers MAY
utilize the parameter scope
and
authorization_details
as specified in [I-D.ietf-oauth-rar] to
determine those resources and/or actions.¶
The authorization server MUST only rely on client authentication if the process of issuance/registration and distribution of the underlying credentials ensures their confidentiality.¶
When client authentication is not possible, the authorization server SHOULD employ other means to validate the client's identity - for example, by requiring the registration of the client redirect URI or enlisting the resource owner to confirm identity. A valid redirect URI is not sufficient to verify the client's identity when asking for resource owner authorization but can be used to prevent delivering credentials to a counterfeit client after obtaining resource owner authorization.¶
The authorization server must consider the security implications of interacting with unauthenticated clients and take measures to limit the potential exposure of other credentials (e.g., refresh tokens) issued to such clients.¶
The privileges an authorization server associates with a certain client identity MUST depend on the assessment of the overall process for client identification and client credential lifecycle management. For example, authentication of a dynamically registered client just ensures the authorization server it is talking to the same client again. In contrast, if there is a web application whose developer's identity was verified, who signed a contract and is issued a client secret that is only used in a secure backend service, the authorization server might allow this client to access more sensitive services or to use the client credentials grant type.¶
Secrets that are statically included as part of an app distributed to
multiple users should not be treated as confidential secrets, as one
user may inspect their copy and learn the shared secret. For this
reason, it is NOT
RECOMMENDED for authorization servers to require client
authentication of public native apps clients using a shared secret,
as this serves little value beyond client identification which is
already provided by the client_id
request parameter.¶
Authorization servers that still require a statically included shared secret for native app clients MUST treat the client as a public client (as defined in Section 2.1), and not accept the secret as proof of the client's identity. Without additional measures, such clients are subject to client impersonation (see Section 7.4.1).¶
Except when using a mechanism like Dynamic Client Registration [RFC7591] to provision per-instance secrets, native apps are classified as public clients, as defined in Section 2.1; they MUST be registered with the authorization server as such. Authorization servers MUST record the client type in the client registration details in order to identify and process requests accordingly.¶
Authorization servers MAY request the inclusion of other platform- specific information, such as the app package or bundle name, or other information that may be useful for verifying the calling app's identity on operating systems that support such functions.¶
For private-use URI scheme-based redirect URIs, authorization servers
SHOULD require that the URI scheme be based on a domain name that is
under the control of the app. In addition to the collision-resistant properties,
this can help to prove ownership in the event of a dispute where two apps
claim the same private-use URI scheme (where one app is acting
maliciously). For example, if two apps claimed com.example.app
,
the owner of example.com
could petition the app store operator to
remove the counterfeit app. Such a petition is harder to prove if a
generic URI scheme was used.¶
A malicious client can impersonate another client and obtain access to protected resources if the impersonated client fails to, or is unable to, keep its client credentials confidential.¶
The authorization server SHOULD enforce explicit resource owner authentication and provide the resource owner with information about the client and the requested authorization scope and lifetime. It is up to the resource owner to review the information in the context of the current client and to authorize or deny the request.¶
The authorization server SHOULD NOT process repeated authorization requests automatically (without active resource owner interaction) without authenticating the client or relying on other measures to ensure that the repeated request comes from the original client and not an impersonator.¶
As stated above, the authorization server SHOULD NOT process authorization requests automatically without user consent or interaction, except when the identity of the client can be assured. This includes the case where the user has previously approved an authorization request for a given client ID - unless the identity of the client can be proven, the request SHOULD be processed as if no previous request had been approved.¶
Measures such as claimed https
scheme redirects MAY be accepted by
authorization servers as identity proof. Some operating systems may
offer alternative platform-specific identity features that MAY be
accepted, as appropriate.¶
The client SHOULD request access tokens with the minimal scope necessary. The authorization server SHOULD take the client identity into account when choosing how to honor the requested scope and MAY issue an access token with less rights than requested.¶
The privileges associated with an access token SHOULD be restricted to the minimum required for the particular application or use case. This prevents clients from exceeding the privileges authorized by the resource owner. It also prevents users from exceeding their privileges authorized by the respective security policy. Privilege restrictions also help to reduce the impact of access token leakage.¶
In particular, access tokens SHOULD be restricted to certain resource
servers (audience restriction), preferably to a single resource
server. To put this into effect, the authorization server associates
the access token with certain resource servers and every resource
server is obliged to verify, for every request, whether the access
token sent with that request was meant to be used for that particular
resource server. If not, the resource server MUST refuse to serve the
respective request. Clients and authorization servers MAY utilize the
parameters scope
or resource
as specified in
[RFC8707], respectively, to determine the
resource server they want to access.¶
Additionally, access tokens SHOULD be restricted to certain resources
and actions on resource servers or resources. To put this into effect,
the authorization server associates the access token with the
respective resource and actions and every resource server is obliged
to verify, for every request, whether the access token sent with that
request was meant to be used for that particular action on the
particular resource. If not, the resource server must refuse to serve
the respective request. Clients and authorization servers MAY utilize
the parameter scope
and authorization_details
as specified in
[I-D.ietf-oauth-rar] to determine those resources and/or actions.¶
Authorization and resource servers SHOULD use mechanisms for sender-constrained access tokens to prevent token replay as described in (#pop_tokens). A sender-constrained access token scopes the applicability of an access token to a certain sender. This sender is obliged to demonstrate knowledge of a certain secret as prerequisite for the acceptance of that access token at the recipient (e.g., a resource server). The use of Mutual TLS for OAuth 2.0 [RFC8705] is RECOMMENDED.¶
Authorization servers MAY issue refresh tokens to clients.¶
Refresh tokens MUST be kept confidential in transit and storage, and shared only among the authorization server and the client to whom the refresh tokens were issued. The authorization server MUST maintain the binding between a refresh token and the client to whom it was issued. Refresh tokens MUST only be transmitted using TLS as described in Section 1.5 with server authentication as defined by [RFC2818].¶
The authorization server MUST verify the binding between the refresh token and client identity whenever the client identity can be authenticated. When client authentication is not possible, the authorization server SHOULD issue sender-constrained refresh tokens or use refresh token rotation as described in (#refreshing-an-access-token).¶
The authorization server MUST ensure that refresh tokens cannot be generated, modified, or guessed to produce valid refresh tokens by unauthorized parties.¶
Resource servers may make access control decisions based on the
identity of the resource owner as communicated in the sub
claim
returned by the authorization server in a token introspection
response [RFC7662] or other mechanisms. If a client is able to
choose its own client_id
during registration with the authorization
server, then there is a risk that it can register with the same sub
value as a privileged user. A subsequent access token obtained under
the client credentials grant may be mistaken for an access token
authorized by the privileged user if the resource server does not
perform additional checks.¶
Authorization servers SHOULD NOT allow clients to influence their
client_id
or sub
value or any other claim if that can cause
confusion with a genuine resource owner. Where this cannot be
avoided, authorization servers MUST provide other means for the
resource server to distinguish between access tokens authorized by a
resource owner from access tokens authorized by the client itself.¶
Access tokens, refresh tokens, authorization codes, and client credentials MUST NOT be transmitted in the clear.¶
The state
and scope
parameters SHOULD NOT include sensitive
client or resource owner information in plain text, as they can be
transmitted over insecure channels or stored insecurely.¶
In order to prevent man-in-the-middle attacks, the authorization server MUST require the use of TLS with server authentication as defined by [RFC2818] for any request sent to the authorization and token endpoints. The client MUST validate the authorization server's TLS certificate as defined by [RFC6125] and in accordance with its requirements for server identity authentication.¶
The authorization server MUST prevent attackers from guessing access tokens, authorization codes, refresh tokens, resource owner passwords, and client credentials.¶
The probability of an attacker guessing generated tokens (and other credentials not intended for handling by end-users) MUST be less than or equal to 2^(-128) and SHOULD be less than or equal to 2^(-160).¶
The authorization server MUST utilize other means to protect credentials intended for end-user usage.¶
Wide deployment of this and similar protocols may cause end-users to become inured to the practice of being redirected to websites where they are asked to enter their passwords. If end-users are not careful to verify the authenticity of these websites before entering their credentials, it will be possible for attackers to exploit this practice to steal resource owners' passwords.¶
Service providers should attempt to educate end-users about the risks phishing attacks pose and should provide mechanisms that make it easy for end-users to confirm the authenticity of their sites. Client developers should consider the security implications of how they interact with the user agent (e.g., external, embedded), and the ability of the end-user to verify the authenticity of the authorization server.¶
To reduce the risk of phishing attacks, the authorization servers MUST require the use of TLS on every endpoint used for end-user interaction.¶
The native app that is initiating the authorization request has a large degree of control over the user interface and can potentially present a fake external user agent, that is, an embedded user agent made to appear as an external user agent.¶
When all good actors are using external user agents, the advantage is that it is possible for security experts to detect bad actors, as anyone faking an external user agent is provably bad. On the other hand, if good and bad actors alike are using embedded user agents, bad actors don't need to fake anything, making them harder to detect. Once a malicious app is detected, it may be possible to use this knowledge to blacklist the app's signature in malware scanning software, take removal action (in the case of apps distributed by app stores) and other steps to reduce the impact and spread of the malicious app.¶
Authorization servers can also directly protect against fake external user agents by requiring an authentication factor only available to true external user agents.¶
Users who are particularly concerned about their security when using in-app browser tabs may also take the additional step of opening the request in the full browser from the in-app browser tab and complete the authorization there, as most implementations of the in-app browser tab pattern offer such functionality.¶
If a malicious app is able to configure itself as the default handler
for https
scheme URIs in the operating system, it will be able to
intercept authorization requests that use the default browser and
abuse this position of trust for malicious ends such as phishing the
user.¶
This attack is not confined to OAuth; a malicious app configured in
this way would present a general and ongoing risk to the user beyond
OAuth usage by native apps. Many operating systems mitigate this
issue by requiring an explicit user action to change the default
handler for http
and https
scheme URIs.¶
An attacker might attempt to inject a request to the redirect URI of the legitimate client on the victim's device, e.g., to cause the client to access resources under the attacker's control. This is a variant of an attack known as Cross-Site Request Forgery (CSRF).¶
The traditional countermeasure are CSRF tokens that are bound to the
user agent and passed in the state
parameter to the authorization
server as described in [RFC6819]. The same protection is provided by
the code_verifier
parameter or the OpenID Connect nonce
value.¶
When using code_verifier
instead of state
or nonce
for CSRF protection, it is
important to note that:¶
code_challenge_method
intended to be used by the client. If an authorization server does not support the requested method,
state
or nonce
MUST be used for CSRF protection instead.¶
state
is used for carrying application state, and integrity of
its contents is a concern, clients MUST protect state
against
tampering and swapping. This can be achieved by binding the
contents of state to the browser session and/or signed/encrypted
state values [I-D.bradley-oauth-jwt-encoded-state].¶
AS therefore MUST provide a way to detect their supported code challenge methods either via AS metadata according to [RFC8414] or provide a deployment-specific way to ensure or determine support.¶
As described in Section 4.4.1.9 of [RFC6819], the authorization request is susceptible to clickjacking. An attacker can use this vector to obtain the user's authentication credentials, change the scope of access granted to the client, and potentially access the user's resources.¶
Authorization servers MUST prevent clickjacking attacks. Multiple countermeasures are described in [RFC6819], including the use of the X-Frame-Options HTTP response header field and frame-busting JavaScript. In addition to those, authorization servers SHOULD also use Content Security Policy (CSP) level 2 [CSP-2] or greater.¶
To be effective, CSP must be used on the authorization endpoint and, if applicable, other endpoints used to authenticate the user and authorize the client (e.g., the device authorization endpoint, login pages, error pages, etc.). This prevents framing by unauthorized origins in user agents that support CSP. The client MAY permit being framed by some other origin than the one used in its redirection endpoint. For this reason, authorization servers SHOULD allow administrators to configure allowed origins for particular clients and/or for clients to register these dynamically.¶
Using CSP allows authorization servers to specify multiple origins in
a single response header field and to constrain these using flexible
patterns (see [CSP-2] for details). Level 2 of this standard provides
a robust mechanism for protecting against clickjacking by using
policies that restrict the origin of frames (using frame-ancestors
)
together with those that restrict the sources of scripts allowed to
execute on an HTML page (by using script-src
). A non-normative
example of such a policy is shown in the following listing:¶
HTTP/1.1 200 OK
Content-Security-Policy: frame-ancestors https://ext.example.org:8000
Content-Security-Policy: script-src 'self'
X-Frame-Options: ALLOW-FROM https://ext.example.org:8000
...
¶
Because some user agents do not support [CSP-2], this technique SHOULD be combined with others, including those described in [RFC6819], unless such legacy user agents are explicitly unsupported by the authorization server. Even in such cases, additional countermeasures SHOULD still be employed.¶
A code injection attack occurs when an input or otherwise external variable is used by an application unsanitized and causes modification to the application logic. This may allow an attacker to gain access to the application device or its data, cause denial of service, or introduce a wide range of malicious side-effects.¶
The authorization server and client MUST sanitize (and validate when
possible) any value received - in particular, the value of the
state
and redirect_uri
parameters.¶
The following attacks can occur when an AS or client has an open redirector. An open redirector is an endpoint that forwards a user's browser to an arbitrary URI obtained from a query parameter.¶
Clients MUST NOT expose open redirectors. Attackers may use open redirectors to produce URLs pointing to the client and utilize them to exfiltrate authorization codes and access tokens, as described in (#redir_uri_open_redir). Another abuse case is to produce URLs that appear to point to the client. This might trick users into trusting the URL and follow it in their browser. This can be abused for phishing.¶
In order to prevent open redirection, clients should only redirect if the target URLs are whitelisted or if the origin and integrity of a request can be authenticated. Countermeasures against open redirection are described by OWASP [owasp_redir].¶
Embedded user agents are a technically possible method for authorizing native apps. These embedded user agents are unsafe for use by third parties to the authorization server by definition, as the app that hosts the embedded user agent can access the user's full authentication credential, not just the OAuth authorization grant that was intended for the app.¶
In typical web-view-based implementations of embedded user agents, the host application can record every keystroke entered in the login form to capture usernames and passwords, automatically submit forms to bypass user consent, and copy session cookies and use them to perform authenticated actions as the user.¶
Even when used by trusted apps belonging to the same party as the authorization server, embedded user agents violate the principle of least privilege by having access to more powerful credentials than they need, potentially increasing the attack surface.¶
Encouraging users to enter credentials in an embedded user agent without the usual address bar and visible certificate validation features that browsers have makes it impossible for the user to know if they are signing in to the legitimate site; even when they are, it trains them that it's OK to enter credentials without validating the site first.¶
Aside from the security concerns, embedded user agents do not share the authentication state with other apps or the browser, requiring the user to log in for every authorization request, which is often considered an inferior user experience.¶
Authorization servers SHOULD NOT allow clients to influence their
client_id
or sub
value or any other claim if that can cause
confusion with a genuine resource owner (see (#client_impersonating)).¶
Native applications are clients installed and executed on the device used by the resource owner (i.e., desktop application, native mobile application). Native applications require special consideration related to security, platform capabilities, and overall end-user experience.¶
The authorization endpoint requires interaction between the client and the resource owner's user agent. The best current practice is to perform the OAuth authorization request in an external user agent (typically the browser) rather than an embedded user agent (such as one implemented with web-views).¶
The native application can capture the response from the authorization server using a redirect URI with a scheme registered with the operating system to invoke the client as the handler, manual copy-and-paste of the credentials, running a local web server, installing a user agent extension, or by providing a redirect URI identifying a server-hosted resource under the client's control, which in turn makes the response available to the native application.¶
Previously, it was common for native apps to use embedded user agents (commonly implemented with web-views) for OAuth authorization requests. That approach has many drawbacks, including the host app being able to copy user credentials and cookies as well as the user needing to authenticate from scratch in each app. See Section 7.20 for a deeper analysis of the drawbacks of using embedded user agents for OAuth.¶
Native app authorization requests that use the browser are more secure and can take advantage of the user's authentication state. Being able to use the existing authentication session in the browser enables single sign-on, as users don't need to authenticate to the authorization server each time they use a new app (unless required by the authorization server policy).¶
Supporting authorization flows between a native app and the browser is possible without changing the OAuth protocol itself, as the OAuth authorization request and response are already defined in terms of URIs. This encompasses URIs that can be used for inter-app communication. Some OAuth server implementations that assume all clients are confidential web clients will need to add an understanding of public native app clients and the types of redirect URIs they use to support this best practice.¶
Just as URIs are used for OAuth on the web to initiate the authorization request and return the authorization response to the requesting website, URIs can be used by native apps to initiate the authorization request in the device's browser and return the response to the requesting native app.¶
By adopting the same methods used on the web for OAuth, benefits seen in the web context like the usability of a single sign-on session and the security of a separate authentication context are likewise gained in the native app context. Reusing the same approach also reduces the implementation complexity and increases interoperability by relying on standards-based web flows that are not specific to a particular platform.¶
Native apps MUST use an external user agent to perform OAuth authorization requests. This is achieved by opening the authorization request in the browser (detailed in Section 8.2) and using a redirect URI that will return the authorization response back to the native app (defined in Section 8.3).¶
Browser-based apps are are clients that run in a web browser, typically written in JavaScript, also known as "single-page apps". These types of apps have particular security considerations similar to native apps.¶
TODO: Bring in the normative text of the browser-based apps BCP when it is finalized.¶
This draft consolidates the functionality in OAuth 2.0 [RFC6749], OAuth 2.0 for Native Apps ([RFC8252]), Proof Key for Code Exchange ([RFC7636]), OAuth 2.0 for Browser-Based Apps ([I-D.ietf-oauth-browser-based-apps]), OAuth Security Best Current Practice ([I-D.ietf-oauth-security-topics]), and Bearer Token Usage ([RFC6750]).¶
Where a later draft updates or obsoletes functionality found in the original [RFC6749], that functionality in this draft is updated with the normative changes described in a later draft, or removed entirely.¶
A non-normative list of changes from OAuth 2.0 is listed below:¶
response_type=token
) is omitted from this specification
as per Section 2.1.2 of [I-D.ietf-oauth-security-topics]¶
This document does not require any IANA actions.¶
All referenced registries are defined by [RFC6749] and related documents that this work is based upon. No changes to those registries are required by this specification.¶
This section provides Augmented Backus-Naur Form (ABNF) syntax descriptions for the elements defined in this specification using the notation of [RFC5234]. The ABNF below is defined in terms of Unicode code points [W3C.REC-xml-20081126]; these characters are typically encoded in UTF-8. Elements are presented in the order first defined.¶
Some of the definitions that follow use the "URI-reference" definition from [RFC3986].¶
Some of the definitions that follow use these common definitions:¶
VSCHAR = %x20-7E NQCHAR = %x21 / %x23-5B / %x5D-7E NQSCHAR = %x20-21 / %x23-5B / %x5D-7E UNICODECHARNOCRLF = %x09 /%x20-7E / %x80-D7FF / %xE000-FFFD / %x10000-10FFFF¶
(The UNICODECHARNOCRLF definition is based upon the Char definition in Section 2.2 of [W3C.REC-xml-20081126], but omitting the Carriage Return and Linefeed characters.)¶
The client_id
element is defined in Section 2.4.1:¶
client-id = *VSCHAR¶
The client_secret
element is defined in Section 2.4.1:¶
client-secret = *VSCHAR¶
The response_type
element is defined in Section 4.1.1 and Section 6.4:¶
response-type = response-name *( SP response-name ) response-name = 1*response-char response-char = "_" / DIGIT / ALPHA¶
The scope
element is defined in Section 3.2.2.1:¶
scope = scope-token *( SP scope-token ) scope-token = 1*NQCHAR¶
The state
element is defined in Section 4.1.1, Section 4.1.2, and Section 4.1.2.1:¶
state = 1*VSCHAR¶
The redirect_uri
element is defined in Section 4.1.1, and Section 4.1.3:¶
redirect-uri = URI-reference¶
The error
element is defined in Sections Section 4.1.2.1, Section 3.2.3.1,
7.2, and 8.5:¶
error = 1*NQSCHAR¶
The error_description
element is defined in Sections Section 4.1.2.1,
Section 3.2.3.1, and Section 5.3:¶
error-description = 1*NQSCHAR¶
The error_uri
element is defined in Sections Section 4.1.2.1, Section 3.2.3.1,
and 7.2:¶
error-uri = URI-reference¶
The grant_type
element is defined in Section Section 3.2.2:¶
grant-type = grant-name / URI-reference grant-name = 1*name-char name-char = "-" / "." / "_" / DIGIT / ALPHA¶
The code
element is defined in Section 4.1.3:¶
code = 1*VSCHAR¶
The access_token
element is defined in Section 3.2.3:¶
access-token = 1*VSCHAR¶
The token_type
element is defined in Section 3.2.3, and Section 6.1:¶
token-type = type-name / URI-reference type-name = 1*name-char name-char = "-" / "." / "_" / DIGIT / ALPHA¶
The expires_in
element is defined in Section 3.2.3:¶
expires-in = 1*DIGIT¶
The refresh_token
element is defined in Section 3.2.3 and Section 4.3:¶
refresh-token = 1*VSCHAR¶
The syntax for new endpoint parameters is defined in Section 6.2:¶
param-name = 1*name-char name-char = "-" / "." / "_" / DIGIT / ALPHA¶
ABNF for code_verifier
is as follows.¶
code-verifier = 43*128unreserved unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~" ALPHA = %x41-5A / %x61-7A DIGIT = %x30-39¶
ABNF for code_challenge
is as follows.¶
code-challenge = 43*128unreserved unreserved = ALPHA / DIGIT / "-" / "." / "_" / "~" ALPHA = %x41-5A / %x61-7A DIGIT = %x30-39¶
At the time of publication of this specification, the
application/x-www-form-urlencoded
media type was defined in
Section 17.13.4 of [W3C.REC-html401-19991224] but not registered in
the IANA MIME Media Types registry
(http://www.iana.org/assignments/media-types). Furthermore, that
definition is incomplete, as it does not consider non-US-ASCII
characters.¶
To address this shortcoming when generating payloads using this media type, names and values MUST be encoded using the UTF-8 character encoding scheme [RFC3629] first; the resulting octet sequence then needs to be further encoded using the escaping rules defined in [W3C.REC-html401-19991224].¶
When parsing data from a payload using this media type, the names and values resulting from reversing the name/value encoding consequently need to be treated as octet sequences, to be decoded using the UTF-8 character encoding scheme.¶
For example, the value consisting of the six Unicode code points (1) U+0020 (SPACE), (2) U+0025 (PERCENT SIGN), (3) U+0026 (AMPERSAND), (4) U+002B (PLUS SIGN), (5) U+00A3 (POUND SIGN), and (6) U+20AC (EURO SIGN) would be encoded into the octet sequence below (using hexadecimal notation):¶
20 25 26 2B C2 A3 E2 82 AC¶
and then represented in the payload as:¶
+%25%26%2B%C2%A3%E2%82%AC¶
Below is a list of well-established extensions at the time of publication:¶
[RFC8628]: OAuth 2.0 Device Authorization Grant¶
[RFC8414]: Authorization Server Metadata¶
[RFC8707]: Resource Indicators¶
[RFC7591]: Dynamic Client Registration¶
[RFC7592]: Dynamic Client Management¶
[I-D.ietf-oauth-access-token-jwt]: JSON Web Token (JWT) Profile for OAuth 2.0 Access Tokens¶
[RFC7662]: Token Introspection¶
[I-D.ietf-oauth-par]: Pushed Authorization Requests¶
[I-D.ietf-oauth-rar]: Rich Authorization Requests¶
authorization_details
that is used to carry fine-grained authorization data in the OAuth authorization request.¶
[[ To be removed from the final specification ]]¶
-04¶
* Added explicit mention of not sending access tokens in URI query strings * Clarifications on definition of client types * Consolidated text around loopback vs localhost * Editorial clarifications throughout the document¶
-03¶
* refactoring to collect all the grant types under the same top-level header in section 4 * Better split normative and security consideration text into the appropriate places, both moving text that was really security considerations out of the main part of the document, as well as pulling normative requirements from the security considerations sections into the appropriate part of the main document * Incorporated many of the published errata on RFC6749 * Updated references to various RFCs * Editorial clarifications throughout the document¶
-02¶
-01¶
-00¶