Internet-Draft OAuth Authn Challenge January 2023
Bertocci & Campbell Expires 16 July 2023 [Page]
Workgroup:
Web Authorization Protocol
Internet-Draft:
draft-ietf-oauth-step-up-authn-challenge-10
Published:
Intended Status:
Standards Track
Expires:
Authors:
V. Bertocci
Auth0/Okta
B. Campbell
Ping Identity

OAuth 2.0 Step-up Authentication Challenge Protocol

Abstract

It is not uncommon for resource servers to require different authentication strengths or recentness according to the characteristics of a request. This document introduces a mechanism for a resource server to signal to a client that the authentication event associated with the access token of the current request doesn't meet its authentication requirements and specify how to meet them. This document also codifies a mechanism for a client to request that an authorization server achieve a specific authentication strength or recentness when processing an authorization request.

Discussion Venues

This note is to be removed before publishing as an RFC.

Discussion of this document takes place on the Web Authorization Protocol Working Group mailing list (oauth@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/oauth/.

Source for this draft can be found at https://github.com/oauth-wg/oauth-step-up-authn-challenge.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 16 July 2023.

Table of Contents

1. Introduction

In simple API authorization scenarios, an authorization server will determine what authentication technique to use to handle a given request on the basis of aspects such as the scopes requested, the resource, the identity of the client and other characteristics known at provisioning time. Although the approach is viable in many situations, it falls short in several important circumstances. Consider, for instance, an eCommerce API requiring different authentication strengths depending on whether the item being purchased exceeds a certain threshold, dynamically estimated by the API itself using a logic that is opaque to the authorization server. An API might also determine that a more recent user authentication is required based on its own risk evaluation of the API request.

This document extends the error codes collection defined by [RFC6750] with a new value, insufficient_user_authentication, which can be used by resource servers to signal to the client that the authentication event associated with the access token presented with the request doesn't meet the authentication requirements of the resource server. This document also introduces acr_values and max_age parameters for the WWW-Authenticate response header defined by [RFC6750], which the resource server can use to explicitly communicate to the client the required authentication strength or recentness.

The client can use that information to reach back to the authorization server with an authorization request specifying the authentication requirements indicated by protected resource, by including the acr_values or max_age parameter as defined in [OIDC].

Those extensions will make it possible to implement interoperable step up authentication with minimal work from resource servers, clients and authorization servers.

1.1. Conventions and Definitions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

2. Protocol Overview

The following is an end-to-end sequence of a typical step-up authentication scenario implemented according to this specification. The scenario assumes that, before the sequence described below takes place, the client already obtained an access token for the protected resource.

+----------+                                          +--------------+
|          |                                          |              |
|          |-------(1) resource request-------------->|              |
|          |                                          |              |
|          |<---------(2) challenge ------------------|   Resource   |
|          |                                          |    Server    |
|  Client  |                                          |              |
|          |-------(5) resource request ------------->|              |
|          |                                          |              |
|          |<-----(6) protected resource -------------|              |
|          |                                          +--------------+
|          |
|          |
|          |  +-------+                              +---------------+
|          |->|       |                              |               |
|          |  |       |--(3) authorization request-->|               |
|          |  | User  |                              |               |
|          |  | Agent |<-----------[...]------------>| Authorization |
|          |  |       |                              |     Server    |
|          |<-|       |                              |               |
|          |  +-------+                              |               |
|          |                                         |               |
|          |<-------- (4) access token --------------|               |
|          |                                         |               |
+----------+                                         +---------------+
Figure 1: Abstract protocol flow
  1. The client requests a protected resource, presenting an access token.
  2. The resource server determines that the circumstances in which the presented access token was obtained offer insufficient authentication strength and/or recentness, hence it denies the request and returns a challenge describing (using a combination of acr_values and max_age) what authentication requirements must be met for the resource server to authorize a request.
  3. The client directs the user agent to the authorization server with an authorization request that includes the acr_values and/or max_age indicated by the resource server in the previous step.
  4. After whatever sequence required by the grant of choice plays out, which will include the necessary steps to authenticate the user in accordance with the acr_values and/or max_age values of the authorization request, the authorization server returns a new access token to the client. The access token contains or references information about the authentication event.
  5. The client repeats the request from step 1, presenting the newly obtained access token.
  6. The resource server finds that the user authentication performed during the acquisition of the new access token complies with its requirements, and returns the requested protected resource.

The validation operations mentioned in step 2 and 6 imply that the resource server has a way of evaluating the authentication level by which the access token was obtained. This document will describe how the resource server can perform that determination when the access token is a JWT Access token [RFC9068] or is validated via introspection [RFC7662]. Other methods of determining the authentication level by which the access token was obtained are possible, per agreement by the authorization server and the protected resource, but are beyond the scope of this specification.

Although the case in which the new access token supersedes old tokens by virtue of a higher authentication level is common, in line with the intuition the term "step-up authentication" suggests, it is important to keep in mind that this might not necessarily hold true in the general case. For example: a resource server might require for a particular request a higher authentication level and a shorter validity, resulting in a token suitable for one-off calls but leading to frequent prompts, hence a suboptimal user experience, if reused for routine operations. In those scenarios, the client would be better served by keeping both the old tokens, associated with a lower authentication level, and the new one- selecting the appropriate token for each API call. This isn't a new requirement for clients, as incremental consent and least privilege principles will require similar heuristics for managing access tokens associated to different scopes and permission levels. This document doesn't recommend any specific token caching strategy, as that will be dependent on the characteristics of every particular scenario. Also recall that OAuth 2.0 [RFC6749] assumes access tokens are treated as opaque by clients. The token format might be unreadable to the client or might change at any time to become unreadable. So, during the course of any token caching strategy, a client must not attempt to inspect the content of the access token to determine the associated authentication information or other details (see Section 6 of [RFC9068] for a more detailed discussion).

3. Authentication Requirements Challenge

This specification introduces a new error code value for the error parameter of [RFC6750] or authentication schemes, such as [I-D.ietf-oauth-dpop], which use the error parameter:

insufficient_user_authentication
The authentication event associated with the access token presented with the request doesn't meet the authentication requirements of the protected resource.

Note: the logic through which the resource server determines that the current request doesn't meet the authentication requirements of the protected resource, and associated functionality (such as expressing, deploying and publishing such requirements) is out of scope for this document.

Furthermore, this specification defines additional WWW-Authenticate auth-param values to convey the authentication requirements back to the client.

acr_values
A space-separated string listing the authentication context class reference values, in order of preference, one of which the protected resource requires for the authentication event associated with the access token. The authentication context, as defined in section 1.2 of [OIDC] conveys information about how authentication takes place (e.g., what authentication method(s) or assurance level to meet).
max_age
Indicates the allowable elapsed time in seconds since the last active authentication event associated with the access token. An active authentication event entails a user interacting with the authorization server in response to an authentication prompt.

Figure 2 below is an example of a WWW-Authenticate header using the insufficient_user_authentication error code value to inform the client that the access token presented isn't sufficient to gain access to the protected resource, and the acr_values parameter to let the client know that the expected authentication level corresponds to the authentication context class reference identified by myACR.

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer error="insufficient_user_authentication",
  error_description="A different authentication level is required",
  acr_values="myACR"
Figure 2: Authentication Requirements Challenge indicating acr_values

The following example in Figure 3 shows a challenge informing the client that last active authentication event associated with the presented access token is too old and a more recent authentication is needed.

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Bearer error="insufficient_user_authentication",
  error_description="More recent authentication is required",
  max_age="5"
Figure 3: Authentication Requirements Challenge indicating max_age

The auth-params max_age and acr_values MAY both occur in the same challenge if the resource server needs to express requirements both about recency and authentication levels. If the resource server determines that the request is also lacking the scopes required by the requested resource, it MAY include the scope attribute with the scope necessary to access the protected resource, as described in section 3.1 of [RFC6750].

4. Authorization Request

A client receiving an authorization error from the resource server carrying the error code insufficient_user_authentication SHOULD parse the WWW-Authenticate header for acr_values and max_age and use them, if present, in constructing an authorization request, which is then conveyed to the authorization server via the user agent in order to obtain a new access token complying with the corresponding requirements. Both acr_values and max_age authorization request parameters are OPTIONAL parameters defined in Section 3.1.2.1. of [OIDC]. This document does not introduce any changes in the authorization server behavior defined in [OIDC] for processing those parameters, hence any authorization server implementing OpenID Connect will be able to participate in the flow described here with little or no changes. See Section 5 for more details.

The example authorization request URI below, which might be used after receiving the challenge in Figure 2, indicates to the authorization server that the client would like the authentication to occur according to the authentication context class reference identified by myACR.

https://as.example.net/authorize?client_id=s6BhdRkqt3
&response_type=code&scope=purchase&acr_values=myACR
Figure 4: Authorization Request indicating acr_values

Subsequent to the challenge in Figure 3, a client might direct the user agent to the following example authorization request URI where the max_age parameter indicates to the authorization server that the user authentication event needs to have occurred no more than five seconds prior.

https://as.example.net/authorize?client_id=s6BhdRkqt3
&response_type=code&scope=purchase&max_age=5
Figure 5: Authorization Request indicating max_age

5. Authorization Response

Section 5.5.1.1 of [OIDC] establishes that an authorization server receiving a request containing the acr_values parameter MAY attempt to authenticate the user in a manner that satisfies the requested Authentication Context Class Reference, and include the corresponding value in the acr claim in the resulting ID Token. The same section also establishes that in case the desired authentication level cannot be met, the authorization server SHOULD include in the acr claim a value reflecting the authentication level of the current session (if any). Furthermore, Section 3.1.2.1 [OIDC] states that if a request includes the max_age parameter, the authorization server MUST include the auth_time claim in the issued ID Token. An authorization server complying with this specification will react to the presence of the acr_values and max_age parameters by including acr and auth_time in the access token (see Section 6 for details). Although [OIDC] leaves the authorization server free to decide how to handle the inclusion of acr in the ID Token when requested via acr_values, when it comes to access tokens in this specification, the authorization server SHOULD consider the requested acr value as necessary for successfully fulfilling the request. That is, the requested acr value is included in the access token if the authentication operation successfully met its requirements, or that the authorization request fails in all other cases, returning unmet_authentication_requirements as defined in [OIDCUAR]. The recommended behavior will help prevent clients getting stuck in a loop where the authorization server keeps returning tokens that the resource server already identified as not meeting its requirements hence known to be rejected as well.

6. Authentication Information Conveyed via Access Token

To evaluate whether an access token meets the protected resource's requirements, the resource servers needs a way of accessing information about the authentication event by which that access token was obtained. This specification provides guidance on how to convey that information in conjunction with two common access token validation methods: the one described in [RFC9068], where the access token is encoded in JWT format and verified via a set of validation rules, and the one described in [RFC7662], where the token is validated and decoded by sending it to an introspection endpoint. Authorization servers and resource servers MAY elect to use other encoding and validation methods, however those are out of scope for this document.

6.1. JWT Access Tokens

When access tokens are represented as JSON Web Tokens (JWT) [RFC7519], the auth_time and acr claims (per Section 2.2.1 of [RFC9068]) are used to convey the time and context of the user authentication event that the authentication server performed during the course of obtaining the access token. It is useful to bear in mind that the values of those two parameters are established at user authentication time and won't change in the event of access token renewals. See the aforementioned Section 2.2.1 of [RFC9068] for details. The following is a conceptual example showing the decoded content of such a JWT access token.

Header:

{"typ":"at+JWT","alg":"ES256","kid":"LTacESbw"}

Claims:

{
 "iss": "https://as.example.net",
 "sub": "someone@example.net",
 "aud": "https://rs.example.com",
 "exp": 1646343000,
 "iat": 1646340200,
 "jti" : "e1j3V_bKic8-LAEB_lccD0G",
 "client_id": "s6BhdRkqt3",
 "scope": "purchase",
 "auth_time": 1646340198,
 "acr": "myACR"
}
Figure 6

6.2. OAuth 2.0 Token Introspection

OAuth 2.0 Token Introspection [RFC7662] defines a method for a protected resource to query an authorization server about the active state of an access token as well as to determine metainformation about the token. The following two top-level introspection response members are defined to convey information about the user authentication event that the authentication server performed during the course of obtaining the access token.

acr
Authentication Context Class Reference. String specifying an Authentication Context Class Reference value that identifies the Authentication Context Class that the user authentication performed satisfied.
auth_time
Time when the user authentication occurred. A JSON numeric value representing the number of seconds from 1970-01-01T00:00:00Z UTC until the time of date/time of the authentication event.

The following example shows an introspection response with information about the user authentication event by which the access token was obtained.

HTTP/1.1 200 OK
Content-Type: application/json

{
  "active": true,
  "client_id": "s6BhdRkqt3",
  "scope": "purchase",
  "sub": "someone@example.net",
  "aud": "https://rs.example.com",
  "iss": "https://as.example.net",
  "exp": 1639528912,
  "iat": 1618354090,
  "auth_time": 1646340198,
  "acr": "myACR"
}
Figure 7

7. Authorization Server Metadata

Authorization Servers can advertise their support of this specification by including in their metadata document (as defined in [RFC8414]) the value acr_values_supported as defined in section 3 of [OIDCDISC]. The presence of acr_values_supported in the authorization server metadata document signals that the authorization server will understand and honor the acr_values and max_age parameters in incoming authorization requests.

8. Deployment Considerations

This specification facilitates the communication of requirements from a resource server to a client, which in turn can enable a smooth step-up authentication experience. However, it's important to realize that the user experience achievable in every specific deployment is a function of the policies each resource server and authorization server pairs establish. Imposing constraints on those policies is out of scope for this specification, hence it is perfectly possible for resource servers and authorization servers to impose requirements that are impossible for users to comply with, or leading to an undesirable user experience outcome. The authentication prompts presented by the authorization server as a result of the requirements propagation method described here might require the user to perform some specific actions such as using multiple devices, having access to devices complying with specific security requirements, and so on. Those extra requirements, concerning more about how to comply with a particular requirement rather than indicating the identifier of the requirement itself, are out of scope for this specification.

9. Security Considerations

This specification adds to previously defined OAuth mechanisms. Their respective Security Considerations apply - OAuth 2.0 [RFC6749], JWT access tokens [RFC9068], Bearer WWW-Authentication [RFC6750], token introspection [RFC7662], and authorization server metadata [RFC8414].

This document MUST NOT be used to position OAuth as an authentication protocol. For the purposes of this specification, the way in which a user authenticated with the authorization server to obtain an access token is salient information, as a resource server might decide whether to grant access on the basis of how that authentication operation was performed. Nonetheless, this specification doesn't attempt to define the mechanics by which authentication takes place, relying on a separate authentication layer to take care of the details. In line with other specifications of the OAuth family, this document assumes the existence of a session without going into the details of how it is established or maintained, what protocols are used to implement that layer (e.g., OpenID Connect), and so forth. Depending on the policies adopted by the resource server, the acr_values parameter introduced in Section 3 might unintentionally disclose information about the authenticated user, the resource itself, the authorization server, and any other context-specific data that an attacker might use to gain knowledge about their target. For example, a resource server requesting an acr value corresponding to a high level of assurance for some users but not others might identify possible high privilege users to target with spearhead phishing attacks. Implementers should use care in determining what to disclose in the challenge and in what circumstances. The logic examining the incoming access token to determine whether a challenge should be returned can execute either before or after the traditional token validation logic, be it based on JWT token validation, introspection, or any other method. The resource server MAY return a challenge without verifying the client presented a valid token. However, this approach will leak the required properties of an authorization token to an actor who has not proven they can obtain a token for this resource server.

10. IANA Considerations

10.1. OAuth Extensions Error Registration

This specification requests registration of the following error value in the "OAuth Extensions Error" registry [IANA.OAuth.Params] established by [RFC6749].

  • Name: insufficient_user_authentication
  • Usage Location: resource access error response
  • Protocol Extension: OAuth 2.0 Step-up Authentication Challenge Protocol
  • Change controller: IETF
  • Specification document(s): Section 3 of [[ this specification ]]

10.2. OAuth Token Introspection Response Registration

This specification requests registration of the following values in the "OAuth Token Introspection Response" registry [IANA.OAuth.Params] established by [RFC7662].

Authentication Context Class Reference:

  • Name: acr
  • Description: Authentication Context Class Reference
  • Change Controller: IESG
  • Specification Document(s): Section 6.2 of [[ this specification ]]

Authentication Time:

  • Name: auth_time
  • Description: Time when the user authentication occurred
  • Change Controller: IESG
  • Specification Document(s): Section 6.2 of [[ this specification ]]

11. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC6749]
Hardt, D., Ed., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, , <https://www.rfc-editor.org/info/rfc6749>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.

12. Informative References

[I-D.abr-twitter-reply]
Roach, A., "A reply to a specific tweet", Work in Progress, Internet-Draft, draft-abr-twitter-reply-00, , <https://www.ietf.org/archive/id/draft-abr-twitter-reply-00.txt>.
[I-D.ietf-oauth-dpop]
Fett, D., Campbell, B., Bradley, J., Lodderstedt, T., Jones, M., and D. Waite, "OAuth 2.0 Demonstrating Proof-of-Possession at the Application Layer (DPoP)", Work in Progress, Internet-Draft, draft-ietf-oauth-dpop-12, , <https://www.ietf.org/archive/id/draft-ietf-oauth-dpop-12.txt>.
[IANA.OAuth.Params]
IANA, "OAuth Parameters", <https://www.iana.org/assignments/oauth-parameters>.
[OIDC]
Sakimura, N., Bradley, J., Jones, M., de Medeiros, B., and C. Mortimore, "OpenID Connect Core 1.0 incorporating errata set 1", , <http://openid.net/specs/openid-connect-core-1_0.html>.
[OIDCDISC]
Sakimura, N., Bradley, J., Jones, M., and E. Jay, "OpenID Connect Core 1.0 incorporating errata set 1", , <https://openid.net/specs/openid-connect-discovery-1_0.html>.
[OIDCUAR]
Lodderstedt, T., "OpenID Connect Core Error Code unmet_authentication_requirements", , <https://openid.net/specs/openid-connect-unmet-authentication-requirements-1_0.html>.
[RFC6750]
Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, , <https://www.rfc-editor.org/info/rfc6750>.
[RFC7519]
Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, , <https://www.rfc-editor.org/info/rfc7519>.
[RFC7662]
Richer, J., Ed., "OAuth 2.0 Token Introspection", RFC 7662, DOI 10.17487/RFC7662, , <https://www.rfc-editor.org/info/rfc7662>.
[RFC8414]
Jones, M., Sakimura, N., and J. Bradley, "OAuth 2.0 Authorization Server Metadata", RFC 8414, DOI 10.17487/RFC8414, , <https://www.rfc-editor.org/info/rfc8414>.
[RFC9068]
Bertocci, V., "JSON Web Token (JWT) Profile for OAuth 2.0 Access Tokens", RFC 9068, DOI 10.17487/RFC9068, , <https://www.rfc-editor.org/info/rfc9068>.

Appendix A. Acknowledgements

I wanted to thank the Academy, the viewers at home, the shampoo manufacturers, etc..

This specification was developed within the OAuth Working Group under the chairpersonship of Rifaat Shekh-Yusef and Hannes Tschofenig with Paul Wouters, and Roman Danyliw serving as Security Area Directors. Additionally, the following individuals contributed ideas, feedback, corrections, and wording that helped shape this specification: Caleb Baker, Ivan Kanakarakis, Pieter Kasselman, Aaron Parecki, Denis Pinkas, Dima Postnikov, and Filip Skokan.

Some early discussion of the motivations and concepts that precipitated the initial version of this document occurred at the 2021 OAuth Security Workshop. The authors thank the organizers of the workshop (Guido Schmitz, Steinar Noem, and Daniel Fett) for hosting an event that's conducive to collaboration and community input.

Appendix B. Document History

[[ To be removed from the final specification ]]

-10

-09

-07/-08

-06

-05

-04

-03

-02

-01

-00 (Working Group Draft)

-01 draft-bertocci-oauth-step-up-authn-challenge

-00 draft-bertocci-oauth-step-up-authn-challenge

Authors' Addresses

Vittorio Bertocci
Auth0/Okta
Brian Campbell
Ping Identity