NFSv4 Working Group W. Adamson
Internet-Draft NetApp
Intended status: Standards Track N. Williams
Expires: December 24, 2016 Cryptonector
June 22, 2016

Multiple NFSv4 Domain Namespace Deployment Guidelines
draft-ietf-nfsv4-multi-domain-fs-reqs-08

Abstract

This document discusses issues relevant to the deployment of the NFSv4 protocols in situations allowing for the construction of an NFSv4 file namespace supporting the use of multiple NFSv4 domains and utilizing multi-domain capable file systems. Also described are constraints on name resolution and security services appropriate to the administration of such a system. Such a namespace is a suitable way to enable a Federated File System supporting the use of multiple NFSv4 domains.

Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on December 24, 2016.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

An NFSv4 domain is defined as a set of users and groups named by a particular domain using the NFSv4 name@domain syntax. This includes NFSv4.0 [RFC7530], NFSv4.1 [RFC5661], and minor versions yet to be published. Often, a computer which acts as an NFSv4 client and always acts on behalf of users belonging to a particular NFSv4 domain is thought of a part of that NFSv4 domain. Similarly, a computer acting as an NFSv4 server that is only aware of users within a particular NFSv4 domain may be thought of as part of that NFSv4 domain.

In this document, the term "multi-domain" always refers to multiple NFSv4 domains.

The Federated File System (FedFS) [RFC5716] describes the requirements and administrative tools to construct a uniform NFSv4 file server based namespace that is capable of spanning a whole enterprise and that is easy to manage.

The FedFS is the standardized method of constructing and administrating an enterprise-wide NFSv4 filesystem, and so is referenced in this document. The issues with multi-domain deployments described in this document apply to all multi-domain deployments, whether they are run as a FedFS or not.

Stand-alone NFSv4 domain deployments can be run in many ways. While a FedFS can be run within all stand-alone NFSv4 domain configurations some of these configurations [StandAlone] are not compatible with joining a multi-domain FedFS namespace.

Multi-domain deployments require support for global identities in name services and security services, and file systems capable of the on-disk representation of identities belonging to multiple NFSv4 domains. Typically, stand-alone NFSv4 domain deployments only provide support for identities belonging to a single NFSv4 domain.

This document describes administration-related constraints applying to the deployment of the NFSv4 protocols in environments supporting the construction of an NFSv4 file system namespace supporting the use of multiple NFSv4 domains and utilizing multi-domain capable file systems. Also described are constraints regarding the name resolution and security services appropriate to such a deployment. Such a namespace is a suitable way to enable a Federated File System supporting the use of multiple NFSv4 domains.

2. Terminology

Name Service: Facilities that provides the mapping between {NFSv4 domain, group or user name} and the appropriate local representation of identity. Also includes facilities providing mapping between a security principal and local representation of identity. Can be applied to global identities or principals from within local and remote domains. Often provided by a Directory Service such as LDAP.
Name Service Switch (nsswitch): a facility in provides a variety of sources for common configuration databases and name resolution mechanisms.
Domain: This term is used in multiple contexts where it has different meanings. Definitions of "nfsv4 domain" and "multi-domain" have already appeared above in Section 1. Below we provide other specific definitions used this document.
DNS domain: a set of computers, services, or any internet resource identified by an DNS domain name [RFC1034].
Security realm or domain: a set of configured security providers, users, groups, security roles, and security policies running a single security protocol and administered by a single entity, for example a Kerberos realm.
FedFS domain: A file namespace that can cross multiple shares on multiple file servers using file-access protocols such as NFSv4. A FedFS domain is typically a single administrative entity, and has a name that is similar to a DNS domain name. Also known as a Federation.
Administrative domain: a set of users, groups, computers, and services administered by a single entity. Can include multiple DNS domains, NFSv4 domains, security domains, and FedFS domains.

Local representation of identity: A representation of a user or a group of users capable of being stored persistently within a file system. Typically such representations are identical to the form in which users and groups are represented within internal server API's. Examples are numeric id's such as a uidNumber (UID), gidNumber (GID) [RFC2307], or a Windows Security Identifier (SID) [CIFS]. In some case the identifier space for user and groups overlap, requiring anyone using such an id to know a priori whether the identifier is for a user or a group.
Global identity: An on-the-wire globally unique form of identity that can be mapped to a local representation. For example, the NFSv4 name@domain or the Kerberos principal@REALM.
Multi-domain capable filesystem: A local filesystem that uses a local ID form that can represent NFSv4 identities from multiple domains.
Principal: an RPCSEC_GSS [RFC2203] authentication identity. Usually, but not always, a user; rarely, if ever, a group; sometimes a host or server.
Authorization Context: A collection of information about a principal such as username, userID, group membership, etcetera used in authorization decisions.
Stringified UID or GID: NFSv4 owner and group strings that consist of decimal numeric values with no leading zeros, and which do not contain an '@' sign. See Section 5.9 "Interpreting owner and owner_group" [RFC5661].

3. Identity Mapping

3.1. NFSv4 Server Identity Mapping

NFSv4 servers deal with two kinds of identities: authentication identities (referred to here as "principals") and authorization identities ("users" and "groups" of users). NFSv4 supports multiple authentication methods, each authenticating an "initiator principal" (typically representing a user) to an "acceptor principal" (always corresponding to the NFSv4 server). NFSv4 does not prescribe how to represent authorization identities on file systems. All file access decisions constitute "authorization" and are made by NFSv4 servers using authorization context information and file metadata related to authorization, such as a file's access control list (ACL).

NFSv4 servers may be required to perform two kinds of mappings depending upon what authentication and authorization information is sent on the wire, and what is stored in the exported file system. For example, if an authentication identity such as a Kerberos principal is sent with authorization information such a "privilege attribute certificate" (PAC) [PAC] then mapping is not required. See Section 6.

  1. Auth-to-authz: A mapping between the authentication identity and the authorization context information.
  2. Wire-to-disk: A mapping between the on-the-wire authorization identity representation and the on-disk authorization identity representation.

A Name Service such as LDAP often provides these mappings.

Many aspects of these mappings are entirely implementation specific, but some require multi-domain capable name resolution and security services in order to interoperate in a multi-domain environment.

NFSv4 servers use these mappings for:

  1. File access: Both the auth-to-authz and the wire-to-disk mappings may be required for file access decisions.
  2. Meta-data setting and listing: The auth-to-authz mapping is usually required to service file metadata setting or listing requests such as ACL or unix permission setting or listing. This mapping is needed because NFSv4 messages use identity representations of the form name@domain which normally differs from the server's local representation of identity.

3.2. NFSv4 Client Identity Mapping

A client setting the owner or group attribute will often need access to identity mapping services. This is because API's within the client will specify the identity in a local form (e.g UNIX using a uid/gid) so that when stringified id's cannot be used, the id must be converted to a global form.

A client obtaining values for the owner or group attributes will similarly need access to identity mapping services. This is because the client API will need these attributes in a local form, as above. As a result name services need to be available to convert the global identity to a local form.

Note that each of these situations arises because client-side API's require a particular local identity representation. The need for mapping services would not arise if the clients could use the global representation of identity directly.

4. Stand-alone NFSv4 Domain Deployment Examples

In order to service as many environments as possible, the NFSv4 protocol is designed to allow administrators freedom to configure their NFSv4 domains as they please.

Stand-alone NFSv4 domains can be run in many ways. Here we list some stand-alone NFSv4 domain deployment examples focusing on the NFSv4 server's use of name service mappings [v4map] and security services deployment to demonstrate the need for some multiple NFSv4 domain constraints to the NFSv4 protocol, name service configuration, and security service choices.

Because all on-disk identities participating in a stand-alone NFSv4 domain belong to the same NFSv4 domain, stand-alone NFSv4 domain deployments have no requirement for exporting multi-domain capable file systems.

These examples are for a NFSv4 server exporting a POSIX UID/GID based file system, a typical deployment. These examples are listed in the order of increasing NFSv4 administrative complexity.

4.1. AUTH_SYS with Stringified UID/GID

This example is the closest NFSv4 gets to being run as NFSv3 as there is no need for a name service for file metadata listing.

File access: The AUTH_SYS RPC credential provides a UID as the authentication identity, and a list of GIDs as authorization context information. File access decisions require no name service interaction as the on-the-wire and on-disk representation are the same and the auth-to-authz UID and GID authorization context information is provided in the RPC credential.

Meta-data setting and listing: When the NFSv4 clients and servers implement a stringified UID/GID scheme, where a stringified UID or GID is used for the NFSv4 name@domain on-the-wire identity, then a name service is not required for file metadata listing as the UID or GID can be constructed from the stringified form on the fly by the server.

4.2. AUTH_SYS with name@domain

Another possibility is to express identity using the form 'name@domain', rather than using a stringified UID/GID scheme for file metadata setting and listing.

File access: This is the same as in Section 4.1.

Meta-data setting and listing: The NFSv4 server will need to use a name service for the wire-to-disk mappings to map between the on-the-wire name@domain syntax and the on-disk UID/GID representation. Often, the NFSv4 server will use the nsswitch interface for these mappings. A typical use of the nsswitch name service interface uses no domain component, just the uid attribute [RFC2307] (or login name) as the name component. This is no issue in a stand-alone NFSv4 domain deployment as the NFSv4 domain is known to the NFSv4 server and can combined with the login name to form the name@domain syntax after the return of the name service call.

4.3. RPCSEC_GSS with name@domain

RPCSEC_GSS uses GSS-API [RFC2743] security mechanisms to securely authenticate users to servers. The most common mechanism is Kerberos [RFC4121].

This final example adds the use of RPCSEC_GSS with the Kerberos 5 GSS security mechanism.

File Access: The forms of GSS principal names are mechanism-specific. For Kerberos these are of the form principal@REALM. Sometimes authorization context information is delivered with authentication, but this cannot be counted on. Authorization context information not delivered with authentication has timely update considerations (i.e., generally it's not possible to get a timely update). File access decisions therefore require a wire-to-disk mapping of the GSS principal to a UID, and an auth-to-authz mapping to obtain the list of GIDs as the authorization context.

Implementations must never blindly drop a Kerberos REALM name from a Kerberos principal name to obtain a POSIX username, but they may be configured to do so for specific REALMs.

Meta-data setting and listing: This is the same as in Section 4.2.

5. Multi-domain Constraints to the NFSv4 Protocol

Joining NFSv4 domains under a single file namespace imposes slightly on the NFSv4 administration freedom. Here we describe the required constraints.

5.1. Name@domain Constraints

NFSv4 uses a syntax of the form "name@domain" as the on-the-wire representation of the "who" field of an NFSv4 access control entry (ACE) for users and groups. This design provides a level of indirection that allows NFSv4 clients and servers with different internal representations of authorization identity to interoperate even when referring to authorization identities from different NFSv4 domains.

Multi-domain capable sites need to meet the following requirements in order to ensure that NFSv4 clients and servers can map between name@domain and internal representations reliably. While some of these constraints are basic assumptions in NFSv4.0 [RFC7530] and NFSv4.1 [RFC5661], they need to be clearly stated for the multi-domain case.

Due to UID and GID collisions, stringified UID/GIDs MUST NOT be used in a multi-domain deployment. This means that multi-domain-capable servers MUST reject requests that use stringified UID/GIDs.

5.1.1. NFSv4 Domain and DNS Services

Here we address the relationship between NFSv4 domain name and DNS domain name in a multi-domain deployment.

The definition of an NFSv4 domain name needs clarification to work in a multi-domain file system namespace. Section 5.9 [RFC5661] loosely defines the NFSv4 domain name as a DNS domain name. This loose definition for the NFSv4 domain is a good one, as DNS domain names are globally unique. As noted above in Section 5.1, any choice of NFSv4 domain name can work within a stand-alone NFSv4 domain deployment whereas the NFSv4 domain is required to be unique in a multi-domain deployment.

A typical configuration is that there is a single NFSv4 domain that is served by a single DNS domain. In this case the NFSv4 domain name can be the same as the DNS domain name.

An NFSv4 domain can span multiple DNS domains. In this case, one of the DNS domain names can be chosen as the NFSv4 domain name.

Multiple NFSv4 domains can also share a DNS domain. In this case, only one of the NFSv4 domains can use the DNS domain name, the other NFSv4 domains must choose another unique NFSv4 domain name.

5.1.2. NFSv4 Domain and Name Services

As noted above in Section 5.1, each name@domain is unique across the multi-domain namespace and maps, on each NFSv4 server, to the local representation of identity used by that server. Typically, this representation consists of an indication of the particular domain combined with the uid/gid corresponding to the name component. To support such an arrangement, each NFSv4 domain needs to have a single name resolution service capable of converting the names defined within the domain to the corresponding local representation.

5.2. RPC Security Constraints

As described in [RFC5661] section 2.2.1.1 "RPC Security Flavors":

        NFSv4.1 clients and servers MUST implement RPCSEC_GSS.
        (This requirement to implement is not a requirement
        to use.) Other flavors, such as AUTH_NONE, and AUTH_SYS,
        MAY be implemented as well.
            

The underlying RPCSEC_GSS security mechanism used in a multi-domain namespace is REQUIRED to employ a method of cross NFSv4 domain trust so that a principal from a security service in one NFSv4 domain can be authenticated in another NFSv4 domain that uses a security service with the same security mechanism. Kerberos is an example of such a security service.

The AUTH_NONE security flavor can be useful in a multi-domain deployment to grant universal access to public data without any credentials.

The AUTH_SYS security flavor uses a host-based authentication model where the weakly authenticated host (the NFSv4 client) asserts the user's authorization identities using small integers, uidNumber, and gidNumber [RFC2307], as user and group identity representations. Because this authorization ID representation has no domain component, AUTH_SYS can only be used in a namespace where all NFSv4 clients and servers share an [RFC2307] name service. A shared name service is required because uidNumbers and gidNumbers are passed in the RPC credential; there is no negotiation of namespace in AUTH_SYS. Collisions can occur if multiple name services are used, so AUTH_SYS MUST NOT be used in a multi-domain file system deployment.

While the AUTH_SYS security mechanism can not be used (indeed, AUTH_SYS is obsolete and of limited use for all of NFS), RPCSEC_GSSv3 [I-D.rpcsec-gssv3] can completely replace all uses of AUTH_SYS in a multi-domain file system. Like AUTH_SYS, and unlike RPCSEC_GSSv1/2, RPCSEC_GSSv3 allows the client to assert and contribute knowledge of the user process' authorization context.

5.2.1. NFSv4 Domain and Security Services

As noted above in Section 5.2, caveat AUTH_NULL, multiple NFSv4 domain security services are RPCSEC_GSS based with the Kerberos 5 security mechanism being the most commonly (and as of this writing, the only) deployed service.

A single Kerberos 5 security service per NFSv4 domain with the upper case NFSv4 domain name as the Kerberos 5 REALM name is a common deployment.

Multiple security services per NFSv4 domain is allowed, and brings the issue of mapping multiple Kerberos 5 principal@REALMs to the same local ID. Methods of achieving this are beyond the scope of this document.

6. Resolving Multi-domain Authorization Information

When an RPCSEC_GSS principal is seeking access to files on an NFSv4 server, after authenticating the principal, the server must obtain in a secure manner the principal's authorization context information from an authoritative source such as the name service in the principal's NFSv4 domain.

In the stand-alone NFSv4 domain case where the principal is seeking access to files on an NFSv4 server in the principal's home NFSv4 domain, the server administrator has knowledge of the local policies and methods for obtaining the principal's authorization information and the mappings to local representation of identity from an authoritative source. E.g., the administrator can configure secure access to the local NFSv4 domain name service.

In the multi-domain case where a principal is seeking access to files on an NFSv4 server not in the principal's home NFSv4 domain, the NFSv4 server may be required to contact the remote name service in the principals NFSv4 domain. In this case there is no assumption of:

There are several methods the NFSv4 server can use to obtain the NFSv4 domain authoritative authorization information for a remote principal from an authoritative source. While any detail is beyond the scope of this document, some general methods are listed here.

  1. A mechanism specific GSS-API authorization payload containing credential authorization data such as a "privilege attribute certificate" (PAC) [PAC] or a "principal authentication data" (PAD) [I-D.sorce-krbwg-general-pac]. This is the preferred method as the payload is delivered as part of GSS-API authentication, avoids requiring any knowledge of the remote authoritative service configuration, and its syntax is well known.
  2. When there is a security agreement between the local and remote NFSv4 domain name services plus regular update data feeds, the NFSv4 server local NFSv4 domain name service can be authoritative for principal's in the remote NFSv4 domain. In this case, the NFSv4 server makes a query to it's local NFSv4 domain name service just as it does when servicing a local domain principal. While this requires detailed knowledge of the remote NFSv4 domains name service for the update data feeds, the authorization context information presented to the NFSv4 server is in the same form as a query for a local principal.
  3. An authenticated direct query from the NFSv4 server to the principal's NFSv4 domain authoritative name service. This requires the NFSv4 server to have detailed knowledge of the remote NFSv4 domain's authoritative name service and detailed knowledge of the syntax of the resultant authorization context information.

7. Stand-alone Examples and Multiple NFSv4 Domain Namespaces

Revisiting the stand-alone [StandAlone] NFSv4 domain deployment examples, we note that due to the use of AUTH_SYS, neither Section 4.1 nor Section 4.2 configurations are suitable for multi-domain deployments.

The Section 4.3 configuration example can participate in a multi-domain namespace deployment if:

8. Security Considerations

This RFC discusses security throughout. All the security considerations of the relevant protocols, such as NFSv4.0 [RFC7530], NFSv4.1 [RFC5661], RPCSEC_GSS [RFC2203], GSS-API [RFC4121], LDAP [RFC4511], Requirements for Federated FS [RFC5716], FedFS Namespace DB Protocol [RFC7532], FedFS Administration Protocol [RFC7533], FedFS Security Addendum [I-D.lever-fedfs-security-addendum] apply.

Authentication and authorization across administrative domains presents security considerations, most of which are treated elsewhere, but we repeat some of them here:

Most of these are security considerations of the mechanisms used to authenticate users to servers and servers to users, and of the mechanisms used to evaluate a user's authorization context. We don't treat them fully here, but implementors should study the protocols in question to get a more complete set of security considerations.

Note that clients/users may also need to evaluate a server's authorization context when using labeled security [I-D.NFSv4.2] (e.g., is the server authorized to handle content at a given security level, for the given compartments). Even when not using labeled security, since there could be many realms (credential issuer) for a given server, it's important to verify that the server a client is talking to has a credential for the name the client has for the server, and that that credential's issuer (i.e., its realm) is allowed to issue it. Usually the service principle realm authorization function is implemented by the security mechanism, but the implementor should check this.

Implementors may be tempted to assume that realm (or "issuer") and NFSv4 domain are roughly the same thing, but they are not. Configuration and/or lookup protocols (such as LDAP) and associated schemas are generally required in order to evaluate a user principal's authorization context. In the simplest scheme a server has access to a database mapping all known principal names to usernames whose authorization context can be evaluated using operating system interfaces that deal in usernames rather than principal names.

9. IANA Considerations

There are no IANA considerations in this document.

10. References

10.1. Normative References

[I-D.NFSv4.2] Haynes, T., "NFS Version 4 Minor Version 2", draft-ietf-nfsv4-minorversion2-36 (Work In Progress), April 2015.
[I-D.rpcsec-gssv3] Adamson, W. and N. Williams, "Remote Procedure Call (RPC) Security Version 3", draft-ietf-nfsv4-rpcsec-gssv3-12 (Work In Progress), July 2015.
[RFC1034] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC2203] Eisler, M., Chiu, A. and L. Ling, "RPCSEC_GSS Protocol Specification", RFC 2203, DOI 10.17487/RFC2203, September 1997.
[RFC2743] Linn, J., "Generic Security Service Application Program Interface Version 2, Update 1", RFC 2743, DOI 10.17487/RFC2743, January 2000.
[RFC4121] Zhu, L., Jaganathan, K. and S. Hartman, "The Kerberos Version 5 Generic Security Service Application Program Interface (GSS-API) Mechanism: Version 2", RFC 4121, DOI 10.17487/RFC4121, July 2005.
[RFC4511] Sermersheim, J., "Lightweight Directory Access Protocol (LDAP): The Protocol", RFC 4511, DOI 10.17487/RFC4511, June 2006.
[RFC5661] Shepler, S., Eisler, M. and D. Noveck, "Network File System (NFS) Version 4 Minor Version 1 Protocol", RFC 5661, DOI 10.17487/RFC5661, January 2010.
[RFC7530] Haynes, T. and D. Noveck, "Network File System (NFS) Version 4 Protocol", RFC 7530, DOI 10.17487/RFC7530, March 2015.

10.2. Informative References

[CIFS] Microsoft Corporation, "[MS-CIFS] — v20130118 Common Internet File System (CIFS) Protocol", January 2013.
[I-D.lever-fedfs-security-addendum] Lever, C., "Federated Filesystem Security Addendum", draft-cel-nfsv4-federated-fs-security-addendum-05 (Active Internet Draft), May 2016.
[I-D.sorce-krbwg-general-pac] Sorce, S., Yu, T. and T. Hardjono, "A Generalized PAC for Kerberos V5", draft-ietf-krb-wg-general-pac-01 (Work In Progress awaiting merge with other document ), June 2011.
[PAC] Brezak, J., "Utilizing the Windows 2000 Authorization Data in Kerberos Tickets for Access Control to Resources", October 2002.
[RFC2307] Howard, L., "An Approach for Using LDAP as a Network Information Service", RFC 2307, DOI 10.17487/RFC2307, March 1998.
[RFC5716] Lentini, J., Everhart, C., Ellard, D., Tewari, R. and M. Naik, "Requirements for Federated File Systems", RFC 5716, DOI 10.17487/RFC5716, January 2010.
[RFC7532] Lentini, J., Tewari, R. and C. Lever, "Namespace Database (NSDB) Protocol for Federated File Systems", RFC 7532, DOI 10.17487/RFC7532, March 2015.
[RFC7533] Lentini, J., Tewari, R. and C. Lever, "Administration Protocol for Federated File Systems", RFC 7533, DOI 10.17487/RFC7533, March 2015.

Appendix A. Acknowledgments

Andy Adamson would like to thank NetApp, Inc. for its funding of his time on this project.

We thank Chuck Lever, Tom Haynes, Brian Reitz, Bruce Fields, and David Noveck for their review.

Authors' Addresses

William A. (Andy) Adamson NetApp EMail: andros@netapp.com
Nicolas Williams Cryptonector EMail: nico@cryptonector.com