| NETMOD Working Group | Q. Wu |
| Internet-Draft | Huawei |
| Intended status: Standards Track | B. Lengyel |
| Expires: August 29, 2020 | Ericsson Hungary |
| Y. Niu | |
| Huawei | |
| February 26, 2020 |
A YANG Data Model for Factory Default Settings
draft-ietf-netmod-factory-default-14
This document defines a YANG data model to allow clients to reset a server back to its factory default condition. It also defines a "factory-default" datastore to allow clients to read the factory default configuration for the device.
The YANG data model in this document conforms to the Network Management Datastore Architecture (NMDA) defined in RFC 8342.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 29, 2020.
Copyright (c) 2020 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
This document defines a method to reset a server to its factory default content. The reset operation may be used, e.g., when the existing configuration has major errors so re-starting the configuration process from scratch is the best option.
A "factory-reset" RPC is defined. When resetting a device, all previous configuration settings will be lost and replaced by the factory default content.
A "factory-default" read-only datastore is defined, that contains the data to replace the contents of implemented read-write conventional configuration datastores at reset. This datastore can also be used in the <get-data> operation.
The YANG data model in this document conforms to the Network Management Datastore Architecture defined in [RFC8342].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.
The following terms are defined in [RFC8342] [RFC7950] and are not redefined here:
The following terms are defined in this document as follows:
A new "factory-reset" RPC is introduced. Upon receiving the RPC
In addition, the "factory-reset" RPC MUST restore non-volatile storage to factory condition. Depending on the system, this may entail deleting dynamically generated files, such as those containing keys (e.g., /etc/ssl/private), certificates (e.g., /etc/ssl), logs (e.g., /var/log), and temporary files (e.g., /tmp/*). All security sensitive data (i.e., private keys, passwords, etc.) SHOULD be overwritten with zeros or a pattern before deletion. The "factory-reset" RPC MAY also be used to trigger some other resetting tasks such as restarting the node or some of the software processes.
Note that operators should be aware that since all read-write datastores are immediately reset to factory default, the device may become unreachable on the network. It is important to understand how a given vendor's device will behave after the RPC is executed. Implementors SHOULD reboot the device or otherwise restart processes needed to bootstrap it.
Following the guidelines for defining Datastores in the appendix A of [RFC8342], this document introduces a new optional datastore resource named "factory-default" that represents a preconfigured initial configuration that can be used to initialize the configuration of a server. A device MAY implement the "factory-reset" RPC without implementing the "factory-default" datastore, which would only eliminate the ability to programmatically determine the factory default configuration.
The contents of <factory-default> is defined by the device vendor and MUST persist across device restarts. If supported, the factory-default datastore MUST be included in the list of datastores in YANG library [RFC 8525].
This module uses the "datastore" identity [RFC8342], and the "default-deny-all" extension statement from [RFC8341].
<CODE BEGINS> file "ietf-factory-default@2019-11-27.yang"
module ietf-factory-default {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-factory-default";
prefix fd;
import ietf-datastores {
prefix ds;
reference
"RFC 8342: Network Management Datastore Architecture (NMDA)";
}
import ietf-netconf-acm {
prefix nacm;
reference
"RFC8341: Network Configuration Access Control Model";
}
organization
"IETF NETMOD (Network Modeling) Working Group";
contact
"WG Web: <https://tools.ietf.org/wg/netconf/>
WG List: <mailto:netconf@ietf.org>
Editor: Qin Wu
<mailto:bill.wu@huawei.com>
Editor: Balazs Lengyel
<mailto:balazs.lengyel@ericsson.com>
Editor: Ye Niu
<mailto:niuye@huawei.com>";
description
"This module provides functionality to reset a server to its
factory default configuration and, when supported, to discover
the factory default configuration contents independent of
resetting the server.
Copyright (c) 2020 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX;
see the RFC itself for full legal notices.";
// RFC Ed.: update the date below with the date of RFC publication
// and remove this note.
// RFC Ed.: replace XXXX with actual RFC number and remove this
// note.
revision 2019-11-27 {
description
"Initial revision.";
reference
"RFC XXXX: Factory default Setting";
}
feature factory-default-datastore {
description
"Indicates that the factory default configuration is
available as a datastore.";
}
rpc factory-reset {
nacm:default-deny-all;
description
"The server resets all datastores to their factory
default content and any non-volatile storage back to
factory condition, deleting all dynamically generated
files, including those containing keys, certificates,
logs, and other temporary files.
Depending on the factory default configuration, after
being reset, the device may become unreachable on the
network.";
}
identity factory-default {
if-feature "factory-default-datastore";
base ds:datastore;
description
"This read-only datastore contains the factory default
configuration for the device used to replace the contents
of the read-write conventional configuration datastores
during a 'factory-reset' RPC operation.";
}
}
<CODE ENDS>
This document registers one URI in the IETF XML Registry [RFC3688]. The following registration has been made:
URI: urn:ietf:params:xml:ns:yang:ietf-factory-default Registrant Contact: The IESG. XML: N/A, the requested URI is an XML namespace.
This document registers one YANG module in the YANG Module Names Registry [RFC6020]. The following registration has been made:
name: ietf-factory-default namespace: urn:ietf:params:xml:ns:yang:ietf-factory-default prefix: fd RFC: xxxx
The YANG module defined in this document extends the base operations for NETCONF [RFC6241] and RESTCONF [RFC8040]. The lowest NETCONF layer is the secure transport layer, and the mandatory-to-implement secure transport is Secure Shell (SSH) [RFC6242]. The lowest RESTCONF layer is HTTPS, and the mandatory-to-implement secure transport is TLS [RFC8446].
Access to the "factory-reset" RPC operation is considered sensitive and therefore has been restricted using the "default-deny-all" access control defined in [RFC8341].
The "factory-reset" RPC can prevent any further management of the device if the session and client config are included in the factory default contents.
The operational disruption caused by setting the config to factory default contents varies greatly depending on the implementation and current config.
The non-volatile storage is expected to be wiped clean and reset back to the factory default state, but there is no guarantee that the data is wiped according to any particular data cleansing standard, and the owner of the device MUST NOT rely on any sensitive data (e.g., private keys) being forensically unrecoverable from the device's non-volatile storage after a factory-reset RPC has been invoked.
Thanks to Juergen Schoenwaelder, Ladislav Lhotka, Alex Campbell, Joe Clarke, Robert Wilton, Kent Watsen, Joel Jaeggli, Lou Berger, Andy Bierman, Susan Hares for reviewing this draft and providing important input to this document.
Rohit R Ranade Huawei Email: rohitrranade@huawei.com
| [RFC6241] | Enns, R., Bjorklund, M., Schoenwaelder, J. and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011. |
| [RFC6242] | Wasserman, M., "Using the NETCONF Protocol over Secure Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011. |
| [RFC8040] | Bierman, A., Bjorklund, M. and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017. |
| [RFC8446] | Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018. |
Editorial Note (To be removed by RFC Editor)
v13 - 14
v12 - 13
v11 - 12
v10 - 11
v09 - 10
v08 - 09
v07 - 08
v06 - 07
v05 - 06
v03 - 04
v02 - 03
v01 - v02
v00 - v01
v03 - v00
v02 - v03
v01 - v02
v03 - v00 - v01
v02 - v03
v01 - v02
v00 - v01