NETCONF A. Clemm
Internet-Draft Huawei
Intended status: Standards Track E. Voit
Expires: June 25, 2018 Cisco Systems
A. Gonzalez Prieto
VMware
A. Tripathy
E. Nilsen-Nygaard
Cisco Systems
A. Bierman
YumaWorks
B. Lengyel
Ericsson
December 22, 2017

YANG Datastore Subscription
draft-ietf-netconf-yang-push-12

Abstract

Via the mechanism described in this document, subscriber applications may request a continuous, customized stream of updates from a YANG datastore. Providing such visibility into changes made upon YANG configuration and operational objects enables new capabilities based on the remote mirroring of configuration and operational state.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on June 25, 2018.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.


Table of Contents

1. Introduction

Traditional approaches to remote visibility have been built on polling. With polling, data is periodically requested and retrieved by a client from a server to stay up-to-date. However, there are issues associated with polling-based management:

A more effective alternative to polling is for an application to receive automatic and continuous updates from a targeted subset of a datastore. Accordingly, there is a need for a service that allows applications to subscribe to updates from a datastore and that enables the publisher to push and in effect stream those updates. The requirements for such a service have been documented in [RFC7923].

This document defines a corresponding solution that is built on top of "Custom Subscription to Event Streams" [I-D.draft-ietf-netconf-subscribed-notifications]. Supplementing that work are YANG data model augmentations, extended RPCs, and new datastore specific update notifications. Transport options for [I-D.draft-ietf-netconf-subscribed-notifications] will work seamlessly with this solution.

2. Definitions and Acronyms

The terms below supplement those defined in [I-D.draft-ietf-netconf-subscribed-notifications]. In addition, the term "datastore" is defined in [I-D.draft-ietf-netmod-revised-datastores].

Datastore node: An instance of management information in a datastore. Also known as "object".

Datastore node update: A data item containing the current value/property of a datastore node at the time the datastore node update was created.

Datastore subtree: An instantiated datastore node and the datastore nodes that are hierarchically contained within it.

Update record: A representation datastore node update(s) resulting from the application of a selection filter for a subscription. An update record will include the value/property of one or more datastore nodes at a point in time. It may contain the update type for each datastore node (e.g., add, change, delete). Also included may be metadata/headers such as a subscription identifier.

Selection filter: Evaluation and/or selection criteria, which may be applied against a targeted set of objects.

Update trigger: A mechanism that determines when an update record needs to be generated.

YANG-Push: The subscription and push mechanism for datastores that is specified in this document.

3. Solution Overview

This document specifies a solution for a push update subscription service. This solution supports the dynamic as well as configured subscriptions to information updates from datastores. Subscriptions specify when notification messages should be sent and what data to include in update records. YANG objects are subsequently pushed from the publisher to the receiver per the terms of the subscription.

3.1. Subscription Model

YANG-push subscriptions are defined using a data model that is itself defined in YANG. This model enhances the subscription model defined in [I-D.draft-ietf-netconf-subscribed-notifications] with capabilities that allow subscribers to subscribe to datastore node updates, specifically to specify the triggers defining when to generate update records as well as what to include in an update record. Key enhancements include:

3.2. Negotiation of Subscription Policies

A dynamic subscription request SHOULD be declined if a publisher's assessment is that it may be unable to provide update records meeting the terms of the request. In this case, a subscriber may quickly follow up with a new subscription request using different parameters.

Random guessing at different parameters by a subscriber is to be discouraged. Therefore, in order to minimize the number of subscription iterations between subscriber and publisher, dynamic subscriptions supports a simple negotiation between subscribers and publishers for subscription parameters. This negotiation is in the form of a no-success response to a failed establish or modify subscription request. The no-success message SHOULD include in the returned error response information that, when considered, increases the likelihood of success for subsequent requests. However, there are no guarantees that subsequent requests for this subscriber will be accepted.

[I-D.draft-ietf-netconf-subscribed-notifications] contains several negotiable subscription parameters. Additional yang-push negotiation information defined in this specification includes hints at acceptable time intervals, size estimates for the number or objects which would be returned from a filter, and the location of an error in a provided filter.

3.3. On-Change Considerations

On-change subscriptions allow subscribers to receive updates whenever changes to targeted objects occur. As such, on-change subscriptions are particularly effective for data that changes infrequently, yet for which applications need to be quickly notified whenever a change does occur with minimal delay.

On-change subscriptions tend to be more difficult to implement than periodic subscriptions. Accordingly, on-change subscriptions may not be supported by all implementations or for every object.

Whether or not to accept or reject on-change subscription requests when the scope of the subscription contains objects for which on-change is not supported is up to the publisher implementation. A publisher MAY accept an on-change subscription even when the scope of the subscription contains objects for which on-change is not supported. In that case, updates are sent only for those objects within the scope that do support on-change updates whereas other objects are excluded from update records, whether or not their values actually change. In order for a subscriber to determine whether objects support on-change subscriptions, objects are marked accordingly on a publisher. Accordingly, when subscribing, it is the responsibility of the subscriber to ensure it is aware of which objects support on-change and which do not. For more on how objects are so marked, see Section 3.10.

Alternatively, a publisher MAY decide to simply reject an on-change subscription in case the scope of the subscription contains objects for which on-change is not supported. In case of a configured subscription, the subscription MAY be suspended.

To avoid flooding receivers with repeated updates for subscriptions containing fast-changing objects, or objects with oscillating values, an on-change subscription allows for the definition of a dampening period. Once an update record for a given object is generated, no other updates for this particular subscription will be created until the end of the dampening period. Values sent at the end of the dampening period are the current values of all changed objects which are current at the time the dampening period expires. Changed objects include those which were deleted or newly created during that dampening period. If an object has returned to its original value (or even has been created and then deleted) during the dampening-period, the last change will still be sent. This will indicate churn is occurring on that object.

On-change subscriptions can be refined to let users subscribe only to certain types of changes. For example, a subscriber might only want object creations and deletions, but not modifications of object values.

Putting it all together, following is the conceptual process for creating an push-change-update notification:

  1. Just before a change, or at the start of a dampening period, evaluate any filtering and any access control rules. The result is a set "A" of datastore nodes and subtrees.
  2. Just after a change, or at the end of a dampening period, evaluate any filtering and any (possibly new) access control rules. The result is a set "B" of datastore nodes and subtrees.
  3. Construct a YANG patch record for going from A to B. If the record is non-empty, send it to the receiver.

Note: In cases where a subscriber wants to have separate dampening periods for different objects, multiple subscriptions with different objects in a selection filter can be created.

3.4. Promise-Theory Considerations

A subscription to updates from a datastore is intended to obviate the need for polling. However, in order to do so, it is critical that subscribers can rely on the subscription and have confidence that they will indeed receive the subscribed updates without having to worry updates being silently dropped. In other words, a subscription constitutes a promise on the side of the publisher to provide the receivers with updates per the terms of the subscription.

Now, there are many reasons why a publisher may at some point no longer be able to fulfill the terms of the subscription, even if the subscription had been entered into with good faith. For example, the volume of data objects may be larger than anticipated, the interval may prove too short to send full updates in rapid succession, or an internal problem may prevent objects from being collected. If for some reason the publisher of a subscription is not able to keep its promise, receivers MUST be notified immediately and reliably. The publisher MAY also suspend the subscription.

A publisher SHOULD reject a request for a subscription if it is unlikely that the publisher will be able fulfill the terms of that subscription request. In such cases, it is preferable to have a subscriber request a less resource intensive subscription than to deal with frequently degraded behavior.

3.5. Data Encodings

3.5.1. Periodic Subscriptions

In a periodic subscription, the data included as part of an update corresponds to data that could have been read using a retrieval operation over that subscription's transport.

3.5.2. On-Change Subscriptions

In an on-change subscription, updates need to indicate not only values of changed datastore nodes but also the types of changes that occurred since the last update. Therefore encoding rules for data in on-change updates will generally follow YANG-patch operation as specified in [RFC8072]. The YANG-patch will describe what needs to be applied to the earlier state reported by the preceding update, to result in the now-current state. Note that contrary to [RFC8072], objects encapsulated are not restricted to configuration objects only.

However a patch must be able to do more than just describe the delta from the previous state to the current state. As per Section 3.3, it must also be able to identify if transient changes have occurred on an object during a dampening period. To support this, it is valid to encode a YANG patch operation so that its application would result in a no change between the previous and current state. This indicates that some churn has occurred on the object. An example of this would be a patch that does a "create" operation for a datastore node where the receiver believes one already exists, or a "merge" operation which replaces a previous value with the same value. Note that this means that the "create" and "delete" errors described in [RFC8072] section 2.5 are not errors, and are valid operations with YANG push.

3.6. Datastore Selection

A subscription must specify both the selection filters and the datastore against which these selection filters will be applied. This information is used to choose and subsequently push data from the publisher's datastore to the receivers.

Only a single selection filter can be applied to a subscription at a time. The following selection filter types are included in the yang-push data model, and may be applied against a datastore:

These filters are intended to be used as selectors that define which objects are within the scope of a subscription. A publisher MUST support at least one type of selection filter.

Selection filters are not intended to be used for property value filtering for non-key objects. Supporting non-key property value filtering so would have a number of implications that would result in significant complexity. While it is possible to define extensions in the future that will support selection filtering based on values, this is not supported in this version of yang-push and a publisher MAY reject a subscription request that contains a filter for object values.

Xpath itself provides powerful filtering constructs, and care must be used in filter definition. As an example, consider an xpath filter with a boolean result; such a result will not provide an easily interpretable subset of a datastore. Beyond the boolean example, it is quite possible to define an xpath filter where results are easy for an application to mis-interpret. Consider an xpath filter which only passes a datastore object when an interface is up. It is up to the receiver to understand implications of the presence or absence of objects in each update.

When the set of selection filtering criteria is applied for periodic subscription, all selected datastore nodes for which a receiver has access are provided to a receiver. If the same filtering criteria is applied to an on-change subscription, only the subset of those datastore nodes supporting on-change are provided. A datastore node which doesn't support on-change is never sent as part of an on-change subscription's "push-update" or "push-change-update".

3.7. Streaming Updates

Contrary to traditional data retrieval requests, datastore subscription enables an unbounded series of update records to be streamed over time. Two generic YANG notifications for update records have been defined for this: "push-update" and "push-change-update".

A "push-update" notification defines a complete, filtered update of the datastore per the terms of a subscription. This type of YANG notification is used for continuous updates of periodic subscriptions. A "push-update" notification can also be used for the on-change subscriptions in two cases. First it will be used as the initial "push-update" if there is a need to synchronize the receiver at the start of a new subscription. It also MAY be sent if the publisher later chooses to resynch an on-change subscription. The "push-update" update record contains a data snippet that contains an instantiated datastore subtree with the subscribed contents. The content of the update record is equivalent to the contents that would be obtained had the same data been explicitly retrieved using e.g., a NETCONF "get" operation, with the same filters applied.

A "push-change-update" notification is the most common type of update for on-change subscriptions. The update record in this case contains a data snippet that indicates the set of changes that datastore nodes have undergone since the last notification message. In other words, this indicates which datastore nodes have been created, deleted, or have had changes to their values. In cases where multiple changes have occurred and the object has not been deleted, the object's most current value is reported. (In other words, for each object, only one change is reported, not its entire history. Doing so would defeat the purpose of the dampening period.)

These new "push-update" or "push-change-update" are encoded and placed within notification messages, and ultimately queued for egress over the specified transport.

The following is an example of a notification message for a subscription tracking the operational status of a single Ethernet port (per [RFC7223]). This notification message is encoded XML over NETCONF as per [I-D.draft-ietf-netconf-netconf-event-notifications].

 
<notification xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
 <eventTime>2017-10-25T08:00:11.22Z</eventTime>
 <push-update xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push">
   <subscription-id>1011</subscription-id>
   <datastore-contents>
     <interfaces-state xmlns="http://foo.com/ietf-interfaces">
       <interface>
         <name>eth0</name>
         <oper-status>up</oper-status>
       </interface> 
     </interfaces-state> 
   </datastore-contents>
 </push-update>
</notification>
          

Figure 1: Push example

The following is an example of an on-change notification message for the same subscription.

 
<notification xmlns="urn:ietf:params:xml:ns:netconf:notification:1.0">
 <eventTime>2017-10-25T08:22:33.44Z</eventTime>
 <push-change-update xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push">
   <subscription-id>89</subscription-id>
   <datastore-changes>
     <yang-patch xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-patch">
       <patch-id>1</patch-id>
       <edit>
         <edit-id>edit1</edit-id>
         <operation>merge</operation>
         <target>/ietf-interfaces:interfaces-state</target>
         <value>
           <interfaces-state xmlns="http://foo.com/ietf-interfaces">
             <interface>
               <name>eth0</name>
               <oper-status>down</oper-status>
             </interface> 
           </interfaces-state>
         </value>
       </edit>
     </yang-patch>
   </datastore-changes>
 </push-change-update>
</notification>
          

Figure 2: Push example for on change

Of Note in the above example is the 'patch-id' with a value of '1'. Per [RFC8072], the 'patch-id' is an arbitrary string. With YANG Push, the publisher SHOULD put into the 'patch-id' a counter starting at '1' which increments with every 'push-change-update' generated for a subscription. If used as a counter, this counter MUST be reset to '1' anytime a resynchronization occurs (i.e., with the sending of a 'push-update'). Also if used as a counter, the counter MUST be reset to '1' the after passing a maximum value of '99999'. Such a mechanism allows easy identification of lost or out-of-sequence update records.

3.8. Subscription Management

The RPCs defined within [I-D.draft-ietf-netconf-subscribed-notifications] have been enhanced to support datastore subscription negotiation. Included in these enhancements are error codes which can indicate why a datastore subscription attempt has failed.

A datastore subscription can be rejected for multiple reasons. This includes a too large subtree request, or the inability of the publisher push update records as frequently as requested. In such cases, no subscription is established. Instead, the subscription-result with the failure reason is returned as part of the RPC response. As part of this response, a set of alternative subscription parameters MAY be returned that would likely have resulted in acceptance of the subscription request. The subscriber may consider these as part of future subscription attempts.

For instance, for the following request:

 
<netconf:rpc message-id="101" 
    xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
  <establish-subscription 
  xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications" 
  xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
   <yp:datastore xmlns:ds="urn:ietf:params:xml:ns:yang:ietf-datastores">
      ds:operational
   </yp:datastore>
    <yp:datastore-xpath-filter netconf:type="xpath" 
      xmlns:ex="http://example.com/sample-data/1.0">
      /ex:foo
    </yp:datastore-xpath-filter>
    <yp:periodic>
      <yp:period>500</yp:period>
    </yp:periodic>
  </establish-subscription>
</netconf:rpc>

Figure 3: Establish-Subscription example

the publisher might return:

 
<rpc-reply message-id="101" 
  xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   <subscription-result 
   xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications" 
   xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
     yp:period-unsupported
   </subscription-result>
   <period-hint xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push">
     2000
   </period-hint>
</rpc-reply>

Figure 4: Error response example

As can be seen above the rejected subscription does not result in the generation of an rpc-reply with an rpc-error element. YANG-push specific errors and negotiation hints part are returned as part of normal RPC operations.

3.9. Receiver Authorization

A receiver of subscription data MUST only be sent updates for which they have proper authorization. A publisher MUST ensure that no non-authorized data is included in push updates. To do so, it needs to apply all corresponding checks applicable at the time of a specific pushed update and if necessary silently remove any non-authorized data from datastore subtrees. This enables YANG data pushed based on subscriptions to be authorized equivalently to a regular data retrieval (get) operation.

A publisher MUST allow for the possibility that a subscription's selection filter references non-existent or access-protected data. Such support permits a receiver the ability to monitor the entire lifecyle of some datastore tree. In this case, all "push-update" notifications must be sent empty, and no "push-change-update" notifications will be sent until some data becomes visible for a receiver.

A publisher MAY choose reject an establish-subscription request which selects non-existent or access-protected data. In addition, a publisher MAY choose to terminate a dynamic subscription or suspend a configured receiver when the authorization privileges of a receiver change, or the access controls for subscribed objects change. Such a capability enables the publisher to avoid having to support a continuous, and total filtering of an entire subscription's content.

In these cases above, the error identity "data-unavailable" SHOULD be returned. This reduces the possibility of leakage of access controlled objects.

The conceptual authorization model for datastores is the NETCONF Access Control Model [RFC6536bis], Section 3.2.4. A clarification to this is that each of the individual nodes in a resulting update record MUST also have applied access control to resulting pushed messages. This includes validating that read access is ok for any nodes newly selected since the last update record for each receiver.

          
                       +-----------------+      +--------------------+
   push-update or -->  | datastore node  |  yes | add datastore node |  
  push-change-update   | access allowed? | ---> | to update message  |
                       +-----------------+      +--------------------+
          

Figure 5: Access control for push updates

If read access into previously accessible nodes has been lost due to a receiver permissions change, this SHOULD be reported as a patch "delete" operation for on-change subscriptions. If not capable of handling such receiver permission changes with such a "delete", publisher implementations MUST force dynamic subscription re-establishment or configured subscription re-initialization so that appropriate filtering is installed.

3.10. On-change Notifiable YANG objects

In some cases, a publisher supporting on-change notifications may not be able to push updates for some object types on-change. Reasons for this might be that the value of the datastore node changes frequently (e.g., [RFC7223]'s in-octets counter), that small object changes are frequent and meaningless (e.g., a temperature gauge changing 0.1 degrees), or that the implementation is not capable of on-change notification for a particular object.

Support for on-change notification is specific to the individual YANG model and/or implementation, and is useful to define in design time. System integrators need this information (without reading any data from a live node).

The default assumption is that no datastore nodes support on-change notification. Schema nodes and subtrees that support on-change notifications MUST be marked by accordingly with the YANG extension "notifiable-on-change". This extension is defined in the data model below.

When an on-change subscription is established, data-nodes are automatically excluded unless they are marked with notifiable-on-change as true. This also means that authorization checks SHALL NOT be performed on them. A subscriber can identify which nodes may be included in on-change updates by retrieving the datastore nodes in the subscription's scope and checking for which notifiable-on-change is marked as true.

In theory, adding "notifiable-on-change" markings can be done within corresponding YANG models. But a more extensible way to avoid having to modify existing module definitions is to add "notifiable-on-change" markings within separate module deviations. This means that when a YANG model designer wants to add a "notifiable-on-change" marking to nodes of an existing module without modifying the module definitions, a new module is introduced that contains deviation statements which add "notifiable-on-change" statements as applicable.

 deviation /sys:system/sys:system-time {
   deviate add {
      yp:notifiable-on-change false;
   }
 }
           

Figure 6: Deviation Example

3.11. Other Considerations

3.11.1. Robustness and reliability

Particularly in the case of on-change updates, it is important that these updates do not get lost. Or in case the loss of an update is unavoidable, it is critical that the receiver is notified accordingly.

Update records for a single subscription MAY NOT be resequenced prior to transport.

It is conceivable that under certain circumstances, a publisher will recognize that it is unable to include within an update record the full set of objects desired per the terms of a subscription. In this case, the publisher MUST take one or more of the following actions.

Note: It is perfectly acceptable to have a series of "push-change-update" notifications (and even "push update" notifications) serially queued at the transport layer awaiting transmission. It is not required to merge pending update messages. I.e., the dampening period applies to update record creation, not transmission.

3.11.2. Publisher capacity

It is far preferable to decline a subscription request than to accept such a request when it cannot be met.

Whether or not a subscription can be supported will be determined by a combination of several factors such as the subscription trigger (on-change or periodic), the period in which to report changes (one second periods will consume more resources than one hour periods), the amount of data in the datastore subtree that is being subscribed to, and the number and combination of other subscriptions that are concurrently being serviced.

4. A YANG data model for management of datastore push subscriptions

4.1. Overview

The YANG data model for datastore push subscriptions is depicted in the following figure. Following YANG tree convention in the depiction, brackets enclose list keys, "rw" means configuration, "ro" operational state data, "?" designates optional nodes, "*" designates nodes that can have multiple instances. Parentheses with a name in the middle enclose choice and case nodes. New schema objects defined here (i.e., beyond those from [I-D.draft-ietf-netconf-subscribed-notifications]) are identified with "yp".

module: ietf-subscribed-notifications
    +--rw streams
    |  +--rw stream* [name]
    |     +--rw name                        string
    |     +--rw description                 string
    |     +--rw replay-support?             empty {replay}?
    |     +--rw replay-log-creation-time?   yang:date-and-time {replay}?
    |     +--rw replay-log-aged-time?       yang:date-and-time {replay}?
    +--rw filters
    |  +--rw stream-filter* [identifier]
    |  |  +--rw identifier               filter-id
    |  |  +--rw (filter-spec)?
    |  |     +--:(stream-subtree-filter)
    |  |     |  +--rw stream-subtree-filter? {subtree}?
    |  |     +--:(stream-xpath-filter)
    |  |        +--rw stream-xpath-filter?     yang:xpath1.0 {xpath}?
    |  +--rw yp:selection-filter* [identifier]
    |     +--rw yp:identifier                  sn:filter-id
    |     +--rw (yp:filter-spec)?
    |        +--:(yp:datastore-subtree-filter)
    |        |  +--rw yp:datastore-subtree-filter? {sn:subtree}?
    |        +--:(yp:datastore-xpath-filter)
    |           +--rw yp:datastore-xpath-filter? 
    |                                          yang:xpath1.0 {sn:xpath}? 
    +--rw subscription-config {configured}?
    |  +--rw subscription* [identifier]
    |     +--rw identifier                     subscription-id
    |     +--rw purpose?                       string
    |     +--rw protocol                       transport {configured}?
    |     +--rw encoding                       encoding
    |     +--rw (target)
    |     |  +--:(stream)
    |     |  |  +--rw (stream-filter)?
    |     |  |  |  +--:(by-reference)
    |     |  |  |  |  +--rw stream-filter-ref          stream-filter-ref
    |     |  |  |  +--:(within-subscription)
    |     |  |  |     +--rw (filter-spec)?
    |     |  |  |        +--:(stream-subtree-filter)
    |     |  |  |        |  +--rw stream-subtree-filter? {subtree}?
    |     |  |  |        +--:(stream-xpath-filter)
    |     |  |  |           +--rw stream-xpath-filter? 
    |     |  |  |                              yang:xpath1.0 {sn:xpath}?
    |     |  |  +--rw stream?                        stream-ref
    |     |  |  +--rw replay-start-time?  yang:date-and-time {replay}?
    |     |  +--:(yp:datastore)
    |     |     +--rw yp:datastore                   identityref
    |     |     +--rw (yp:selected-content)?
    |     |        +--:(yp:by-reference)
    |     |        |  +--rw yp:selection-filter-ref selection-filter-ref
    |     |        +--:(yp:within-subscription)
    |     |           +--rw (yp:filter-spec)?
    |     |              +--:(yp:datastore-subtree-filter)
    |     |              |  +--rw yp:datastore-subtree-filter? 
    |     |                                                {sn:subtree}?
    |     |              +--:(yp:datastore-xpath-filter)
    |     |                 +--rw yp:datastore-xpath-filter?
    |     |                                    yang:xpath1.0 {sn:xpath}?
    |     +--rw stop-time?                     yang:date-and-time
    |     +--rw dscp?                          inet:dscp {qos}?
    |     +--rw weighting?                     uint8 {qos}?
    |     +--rw dependency?                    sn:subscription-id {qos}?
    |     +--rw (notification-message-origin)?
    |     |  +--:(interface-originated)
    |     |  |  +--rw source-interface?              if:interface-ref
    |     |  +--:(address-originated)
    |     |     +--rw source-vrf?   -> /ni:network-instances/
    |     |                        network-instance/name {supports-vrf}?
    |     |     +--rw source-address?            inet:ip-address-no-zone
    |     +--rw receivers
    |     |  +--rw receiver* [address port]
    |     |     +--rw address    inet:host
    |     |     +--rw port       inet:port-number
    |     +--rw (yp:update-trigger)
    |        +--:(yp:periodic)
    |        |  +--rw yp:periodic!
    |        |     +--rw yp:period         yang:timeticks
    |        |     +--rw yp:anchor-time?   yang:date-and-time
    |        +--:(yp:on-change) {on-change}?
    |           +--rw yp:on-change!
    |              +--rw yp:dampening-period?    yang:timeticks
    |              +--rw yp:no-synch-on-start?   empty
    |              +--rw yp:excluded-change*     change-type
    +--ro subscriptions
       +--ro subscription* [identifier]
          +--ro identifier                       subscription-id
          +--ro configured-subscription-state? enumeration {configured}?
          +--ro purpose?                         string {configured}?
          +--ro protocol                         transport {configured}?
          +--ro encoding                         encoding
          +--ro (target)
          |  +--:(stream)
          |  |  +--ro (stream-filter)?
          |  |  |  +--:(by-reference)
          |  |  |  |  +--ro stream-filter-ref          stream-filter-ref
          |  |  |  +--:(within-subscription)
          |  |  |     +--ro (filter-spec)?
          |  |  |        +--:(stream-subtree-filter)
          |  |  |        |  +--ro stream-subtree-filter? {subtree}?
          |  |  |        +--:(stream-xpath-filter)
          |  |  |           +--ro stream-xpath-filter?  
          |  |  |                            yang:xpath1.0 {sn:xpath}?  
          |  |  +--ro stream?                          stream-ref
          |  |  +--ro replay-start-time?    yang:date-and-time {replay}?
          |  +--:(yp:datastore)
          |     +--ro yp:datastore                     identityref
          |     +--ro (yp:selected-content)?
          |        +--:(yp:by-reference)
          |        |  +--ro yp:selection-filter-ref selection-filter-ref
          |        +--:(yp:within-subscription)
          |           +--ro (yp:filter-spec)?
          |              +--:(yp:datastore-subtree-filter)
          |              |  +--ro yp:datastore-subtree-filter? 
          |                                                {sn:subtree}?
          |              +--:(yp:datastore-xpath-filter)
          |                 +--ro yp:datastore-xpath-filter? 
          |                                  yang:xpath1.0 {sn:xpath}?
          +--ro stop-time?                       yang:date-and-time
          +--ro dscp?                            inet:dscp {qos}?
          +--ro weighting?                       uint8 {qos}?
          +--ro dependency?                    sn:subscription-id {qos}?
          +--ro (notification-message-origin)?
          |  +--:(interface-originated)
          |  |  +--ro source-interface?                if:interface-ref
          |  +--:(address-originated)
          |     +--ro source-vrf?  -> /ni:network-instances/
          |     |                  network-instance/name {supports-vrf}?
          |     +--ro source-address?            inet:ip-address-no-zone
          +--ro receivers
          |  +--ro receiver* [address port]
          |     +--ro address                   inet:host
          |     +--ro port                      inet:port-number
          |     +--ro pushed-notifications?     yang:counter64
          |     +--ro excluded-notifications?   yang:counter64
          |     +--ro status                    enumeration
          |     +---x reset
          |        +--ro output
          |           +--ro time    yang:date-and-time
          +--ro (yp:update-trigger)
             +--:(yp:periodic)
             |  +--ro yp:periodic!
             |     +--ro yp:period         yang:timeticks
             |     +--ro yp:anchor-time?   yang:date-and-time
             +--:(yp:on-change) {on-change}?
                +--ro yp:on-change!
                   +--ro yp:dampening-period?    yang:timeticks
                   +--ro yp:no-synch-on-start?   empty
                   +--ro yp:excluded-change*     change-type

  rpcs:
    +---x establish-subscription
    |  +---w input
    |  |  +---w encoding?                      encoding
    |  |  +---w (target)
    |  |  |  +--:(stream)
    |  |  |  |  +---w (stream-filter)?
    |  |  |  |  |  +--:(by-reference)
    |  |  |  |  |  |  +---w stream-filter-ref          stream-filter-ref
    |  |  |  |  |  +--:(within-subscription)
    |  |  |  |  |     +---w (filter-spec)?
    |  |  |  |  |        +--:(stream-subtree-filter)
    |  |  |  |  |        |  +---w stream-subtree-filter? {subtree}?
    |  |  |  |  |        +--:(stream-xpath-filter)
    |  |  |  |  |           +---w stream-xpath-filter?
    |  |  |  |  |                              yang:xpath1.0 {sn:xpath}?
    |  |  |  |  +---w stream?                        stream-ref
    |  |  |  |  +---w replay-start-time?    yang:date-and-time {replay}?
    |  |  |  +--:(yp:datastore)
    |  |  |     +---w yp:datastore                   identityref
    |  |  |     +---w (yp:selected-content)?
    |  |  |        +--:(yp:by-reference)
    |  |  |        |  +---w yp:selection-filter-ref selection-filter-ref
    |  |  |        +--:(yp:within-subscription)
    |  |  |           +---w (yp:filter-spec)?
    |  |  |              +--:(yp:datastore-subtree-filter)
    |  |  |              |  +---w yp:datastore-subtree-filter? 
    |  |  |              |                                 {sn:subtree}?
    |  |  |              +--:(yp:datastore-xpath-filter)
    |  |  |                 +---w yp:datastore-xpath-filter?
    |  |  |                                  yang:xpath1.0 {sn:xpath}?
    |  |  +---w stop-time?                     yang:date-and-time
    |  |  +---w dscp?                          inet:dscp {qos}?
    |  |  +---w weighting?                     uint8 {qos}?
    |  |  +---w dependency?                    sn:subscription-id {qos}?
    |  |  +---w (yp:update-trigger)
    |  |     +--:(yp:periodic)
    |  |     |  +---w yp:periodic!
    |  |     |     +---w yp:period         yang:timeticks
    |  |     |     +---w yp:anchor-time?   yang:date-and-time
    |  |     +--:(yp:on-change) {on-change}?
    |  |        +---w yp:on-change!
    |  |           +---w yp:dampening-period?    yang:timeticks
    |  |           +---w yp:no-synch-on-start?   empty
    |  |           +---w yp:excluded-change*     change-type
    |  +--ro output
    |     +--ro subscription-result         subscription-result
    |     +--ro (result)?
    |        +--:(no-success)
    |        |  +--ro filter-failure?             string
    |        |  +--ro replay-start-time-hint?     yang:date-and-time
    |        |  +--ro yp:period-hint?             yang:timeticks
    |        |  +--ro yp:error-path?              string
    |        |  +--ro yp:object-count-estimate?   uint32
    |        |  +--ro yp:object-count-limit?      uint32
    |        |  +--ro yp:kilobytes-estimate?      uint32
    |        |  +--ro yp:kilobytes-limit?         uint32
    |        +--:(success)
    |           +--ro identifier                  subscription-id
    +---x modify-subscription
    |  +---w input
    |  |  +---w identifier?                    subscription-id
    |  |  +---w (target)
    |  |  |  +--:(stream)
    |  |  |  |  +---w (stream-filter)?
    |  |  |  |     +--:(by-reference)
    |  |  |  |     |  +---w stream-filter-ref          stream-filter-ref
    |  |  |  |     +--:(within-subscription)
    |  |  |  |        +---w (filter-spec)?
    |  |  |  |           +--:(stream-subtree-filter)
    |  |  |  |           |  +---w stream-subtree-filter? {subtree}?
    |  |  |  |           +--:(stream-xpath-filter)
    |  |  |  |              +---w stream-xpath-filter?
    |  |  |  |                               yang:xpath1.0 {sn:xpath}?
    |  |  |  +--:(yp:datastore)
    |  |  |     +---w (yp:selected-content)?
    |  |  |        +--:(yp:by-reference)
    |  |  |        |  +---w yp:selection-filter-ref selection-filter-ref
    |  |  |        +--:(yp:within-subscription)
    |  |  |           +---w (yp:filter-spec)?
    |  |  |              +--:(yp:datastore-subtree-filter)
    |  |  |              |  +---w yp:datastore-subtree-filter? 
    |  |  |              |                                 {sn:subtree}?
    |  |  |              +--:(yp:datastore-xpath-filter)
    |  |  |                 +---w yp:datastore-xpath-filter? 
    |  |  |                                 yang:xpath1.0 {sn:xpath}?
    |  |  +---w stop-time?                     yang:date-and-time
    |  |  +---w (yp:update-trigger)
    |  |     +--:(yp:periodic)
    |  |     |  +---w yp:periodic!
    |  |     |     +---w yp:period         yang:timeticks
    |  |     |     +---w yp:anchor-time?   yang:date-and-time
    |  |     +--:(yp:on-change) {on-change}?
    |  |        +---w yp:on-change!
    |  |           +---w yp:dampening-period?   yang:timeticks
    |  +--ro output
    |     +--ro subscription-result         subscription-result
    |     +--ro (result)?
    |        +--:(no-success)
    |           +--ro filter-failure?             string
    |           +--ro yp:period-hint?             yang:timeticks
    |           +--ro yp:error-path?              string
    |           +--ro yp:object-count-estimate?   uint32
    |           +--ro yp:object-count-limit?      uint32
    |           +--ro yp:kilobytes-estimate?      uint32
    |           +--ro yp:kilobytes-limit?         uint32
    +---x delete-subscription
    |  +---w input
    |  |  +---w identifier    subscription-id
    |  +--ro output
    |     +--ro subscription-result    subscription-result
    +---x kill-subscription
       +---w input
       |  +---w identifier    subscription-id
       +--ro output
          +--ro subscription-result    subscription-result

  notifications:
    +---n replay-completed {replay}?
    |  +--ro identifier    subscription-id
    +---n subscription-completed
    |  +--ro identifier    subscription-id
    +---n subscription-started {configured}?
    |  +--ro identifier                     subscription-id
    |  +--ro protocol                       transport {configured}?
    |  +--ro encoding                       encoding
    |  +--ro (target)
    |  |  +--:(stream)
    |  |  |  +--ro (stream-filter)?
    |  |  |  |  +--:(by-reference)
    |  |  |  |  |  +--ro stream-filter-ref           stream-filter-ref
    |  |  |  |  +--:(within-subscription)
    |  |  |  |     +--ro (filter-spec)?
    |  |  |  |        +--:(stream-subtree-filter)
    |  |  |  |        |  +--ro stream-subtree-filter? {subtree}?
    |  |  |  |        +--:(stream-xpath-filter)
    |  |  |  |           +--ro stream-xpath-filter?
    |  |  |  |                                 yang:xpath1.0 {sn:xpath}?
    |  |  |  +--ro stream?                        stream-ref
    |  |  |  +--ro replay-start-time?       yang:date-and-time {replay}?
    |  |  +--:(yp:datastore)
    |  |     +--ro yp:datastore                   identityref
    |  |     +--ro (yp:selected-content)?
    |  |        +--:(yp:by-reference)
    |  |        |  +--ro yp:selection-filter-ref    selection-filter-ref
    |  |        +--:(yp:within-subscription)
    |  |           +--ro (yp:filter-spec)?
    |  |              +--:(yp:datastore-subtree-filter)
    |  |              |  +--ro yp:datastore-subtree-filter?{sn:subtree}?
    |  |              +--:(yp:datastore-xpath-filter)
    |  |                 +--ro yp:datastore-xpath-filter?     
    |  |                                       yang:xpath1.0 {sn:xpath}?
    |  +--ro stop-time?                     yang:date-and-time
    |  +--ro dscp?                          inet:dscp {qos}?
    |  +--ro weighting?                     uint8 {qos}?
    |  +--ro dependency?                    sn:subscription-id {qos}?
    |  +--ro (yp:update-trigger)
    |     +--:(yp:periodic)
    |     |  +--ro yp:periodic!
    |     |     +--ro yp:period         yang:timeticks
    |     |     +--ro yp:anchor-time?   yang:date-and-time
    |     +--:(yp:on-change) {on-change}?
    |        +--ro yp:on-change!
    |           +--ro yp:dampening-period?    yang:timeticks
    |           +--ro yp:no-synch-on-start?   empty
    |           +--ro yp:excluded-change*     change-type
    +---n subscription-resumed
    |  +--ro identifier    subscription-id
    +---n subscription-modified
    |  +--ro identifier                     subscription-id
    |  +--ro protocol                       transport {configured}?
    |  +--ro encoding                       encoding
    |  +--ro (target)
    |  |  +--:(stream)
    |  |  |  +--ro (stream-filter)?
    |  |  |  |  +--:(by-reference)
    |  |  |  |  |  +--ro stream-filter-ref             stream-filter-ref
    |  |  |  |  +--:(within-subscription)
    |  |  |  |     +--ro (filter-spec)?
    |  |  |  |        +--:(stream-subtree-filter)
    |  |  |  |        |  +--ro stream-subtree-filter? {subtree}?
    |  |  |  |        +--:(stream-xpath-filter)
    |  |  |  |           +--ro stream-xpath-filter?
    |  |  |  |                                 yang:xpath1.0 {sn:xpath}?
    |  |  |  +--ro stream?                        stream-ref
    |  |  |  +--ro replay-start-time?       yang:date-and-time {replay}?
    |  |  +--:(yp:datastore)
    |  |     +--ro yp:datastore                   identityref
    |  |     +--ro (yp:selected-content)?
    |  |        +--:(yp:by-reference)
    |  |        |  +--ro yp:selection-filter-ref    selection-filter-ref
    |  |        +--:(yp:within-subscription)
    |  |           +--ro (yp:filter-spec)?
    |  |              +--:(yp:datastore-subtree-filter)
    |  |              |  +--ro yp:datastore-subtree-filter?{sn:subtree}?
    |  |              +--:(yp:datastore-xpath-filter)
    |  |                 +--ro yp:datastore-xpath-filter?
    |  |                                       yang:xpath1.0 {sn:xpath}?
    |  +--ro stop-time?                     yang:date-and-time
    |  +--ro dscp?                          inet:dscp {qos}?
    |  +--ro weighting?                     uint8 {qos}?
    |  +--ro dependency?                    sn:subscription-id {qos}?
    |  +--ro (yp:update-trigger)
    |     +--:(yp:periodic)
    |     |  +--ro yp:periodic!
    |     |     +--ro yp:period         yang:timeticks
    |     |     +--ro yp:anchor-time?   yang:date-and-time
    |     +--:(yp:on-change) {on-change}?
    |        +--ro yp:on-change!
    |           +--ro yp:dampening-period?    yang:timeticks
    |           +--ro yp:no-synch-on-start?   empty
    |           +--ro yp:excluded-change*     change-type
    +---n subscription-terminated
    |  +--ro identifier        subscription-id
    |  +--ro error-id          subscription-errors
    |  +--ro filter-failure?   string
    +---n subscription-suspended
       +--ro identifier        subscription-id
       +--ro error-id          subscription-errors
       +--ro filter-failure?   string

module: ietf-yang-push

  rpcs:
    +---x resynch-subscription {on-change}?
       +---w input
       |  +---w identifier    sn:subscription-id
       +--ro output
          +--ro subscription-result    sn:subscription-result

  notifications:
    +---n push-update
    |  +--ro subscription-id?      sn:subscription-id
    |  +--ro updates-not-sent?     empty
    |  +--ro datastore-contents?
    +---n push-change-update {on-change}?
       +--ro subscription-id?     sn:subscription-id
       +--ro updates-not-sent?    empty
       +--ro datastore-changes?

        

Figure 7: Model structure

Selected components of the model are summarized below.

4.2. Subscription configuration

Both configured and dynamic subscriptions are represented within the list subscription. But only configured subscriptions are listed within list subscription-config. In both lists, each subscription has own list elements. New and enhanced parameters extending the basic subscription data model in [I-D.draft-ietf-netconf-subscribed-notifications] include:

4.3. YANG Notifications

4.3.1. State Change Notifications

Subscription state notifications and mechanism are reused from [I-D.draft-ietf-netconf-subscribed-notifications]. Some have been augmented to include the datastore specific objects.

4.3.2. Notifications for Subscribed Content

Along with the subscribed content, there are other objects which might be part of a "push-update" or "push-change-update"

A "subscription-id" MUST be transported along with the subscribed contents. An [RFC5277] Section 4 one-way notification MAY be used for encoding updates. Where it is, the relevant "subscription-id" MUST be encoded as the first element within each "push-update" or "push-change-update". This allows a receiver to differentiate which subscription resulted in a particular push.

A "time-of-update" which represents the time an update record snapshot was generated. A receiver MAY assume that a publisher's objects have these pushed values at this point in time.

An "updates-not-sent" object. This object indicates that not all changes which have occurred since the last update are actually included with this update. In other words, the publisher has failed to fulfill its full subscription obligations. (For example a datastore was unable to providing the full set of datastore nodes to a publisher process.) To facilitate re-synchronization of on-change subscriptions, a publisher MAY subsequently send a "push-update" containing a full selection snapshot of subscribed data.

4.4. YANG RPCs

YANG-Push subscriptions are established, modified, and deleted using RPCs augmented from [I-D.draft-ietf-netconf-subscribed-notifications].

4.4.1. Establish-subscription RPC

The subscriber sends an establish-subscription RPC with the parameters in section 3.1. An example might look like:

<netconf:rpc message-id="101"
  xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
  <establish-subscription
       xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications"
       xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
    <yp:datastore>
      <yp:source xmlns:ds="urn:ietf:params:xml:ns:yang:ietf-datastores">
        ds:operational
      </yp:source>
      <xpath-filter 
          xmlns:ex="http://example.com/sample-data/1.0"
          select="/ex:foo"/>
    </yp:datastore>
    <yp:periodic>
      <yp:period>500</yp:period>
    </yp:periodic>
 </establish-subscription>
</netconf:rpc>          
    

Figure 8: Establish-subscription RPC

The publisher MUST respond explicitly positively (i.e., subscription accepted) or negatively (i.e., subscription rejected) to the request. Positive responses include the "identifier" of the accepted subscription. In that case a publisher MAY respond:

<rpc-reply message-id="101"
    xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <subscription-result 
      xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications"> 
       ok
    </subscription-result>
    <identifier 
      xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications"> 
       52
    </identifier>
</rpc-reply>
    

Figure 9: Establish-subscription positive RPC response

A subscription can be rejected for multiple reasons, including the lack of authorization to establish a subscription, no capacity to serve the subscription at the publisher, or the inability of the publisher to select datastore content at the requested cadence.

If a request is rejected because the publisher is not able to serve it, the publisher SHOULD include in the returned error hints ar what subscription parameters might have been accepted for the request. However, there are no guarantee that subsequent requests using this info will in fact be accepted.

For example, for the following request:

<netconf:rpc message-id="101"
  xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
  <establish-subscription 
  xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications" 
  xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
    <yp:datastore 
    xmlns:ds="urn:ietf:params:xml:ns:yang:ietf-datastores">
      ds:operational
    </yp:datastore>
    <yp:datastore-xpath-filter netconf:type="xpath" 
    xmlns:ex="http://example.com/sample-data/1.0">
      /ex:foo
    </yp:datastore-xpath-filter>
    <yp:on-change>
      <yp:dampening-period>10</yp:dampening-period>
    </yp:on-change>
  </establish-subscription>
</netconf:rpc>
          

Figure 10: Establish-subscription request example 2

a publisher that cannot serve on-change updates but periodic updates might return the following:

<rpc-reply message-id="101"
      xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
    <subscription-result 
       xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications"
       xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
      yp:period-unsupported
    </subscription-result>
    <period-hint xmlns:"urn:ietf:params:xml:ns:yang:ietf-yang-push">
      100
    </period-hint>
</rpc-reply>
             

Figure 11: Establish-subscription error response example 2

4.4.2. Modify-subscription RPC

The subscriber MAY invoke the "modify-subscription" RPC for a subscription it previously established. The subscriber will include newly desired values in the "modify-subscription" RPC. Parameters not included MUST remain unmodified. Below is an example where a subscriber attempts to modify the "period" of a subscription.

<netconf:rpc message-id="102"
   xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
   <modify-subscription 
   xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications" 
   xmlns:yp="urn:ietf:params:xml:ns:yang:ietf-yang-push">
    <identifier>1011</identifier>
    <yp:datastore 
    xmlns:ds="urn:ietf:params:xml:ns:yang:ietf-datastores">
      ds:operational
    </yp:datastore>
    <yp:datastore-xpath-filter 
    netconf:type="xpath" xmlns:ex="http://example.com/sample-data/1.0">
      /ex:bar
    </yp:datastore-xpath-filter>
    <yp:periodic>
      <yp:period>250</yp:period>
    </yp:periodic>
   </modify-subscription>
</netconf:rpc>
    

Figure 12: Modify subscription request

The publisher MUST respond explicitly positively or negatively to the request. A response to a successful modification might look like:

<rpc-reply message-id="102"
   xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   <subscription-result 
      xmlns="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications">
      ok
   </subscription-result>
</rpc-reply>
    

Figure 13: Modify subscription response

If the subscription modification is rejected, the publisher MUST send a response like it does for an "establish-subscription" and maintain the subscription as it was before the modification request. Responses MAY include hints. A subscription MAY be modified multiple times.

A configured subscription cannot be modified using "modify-subscription" RPC. Instead, the configuration needs to be edited as needed.

4.4.3. Delete-subscription RPC

To stop receiving updates from a subscription and effectively delete a subscription that had previously been established using an "establish-subscription" RPC, a subscriber can send a "delete-subscription" RPC, which takes as only input the subscription's "identifier".

Configured subscriptions cannot be deleted via RPC, but have to be removed from the configuration. This RPC is identical to the RPC from [I-D.draft-ietf-netconf-subscribed-notifications].

4.4.4. Resynch-subscription RPC

This RPC is only applicable only for on-change subscriptions previously been established using an "establish-subscription" RPC. On receipt, a publisher must either reply "ok" and quickly follow with a "push-update", or send an appropriate error such as "on-change-synch-unsupported". For example:

<netconf:rpc message-id="103" 
xmlns:netconf="urn:ietf:params:xml:ns:netconf:base:1.0">
  <resynch-subscription 
  xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push" 
  xmlns:sn="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications">
    <identifier>1011</identifier>
  </resynch-subscription>
</netconf:rpc>
  
<rpc-reply message-id="103" 
xmlns="urn:ietf:params:xml:ns:netconf:base:1.0">
   <subscription-result 
   xmlns="urn:ietf:params:xml:ns:yang:ietf-yang-push" 
   xmlns:sn="urn:ietf:params:xml:ns:yang:ietf-subscribed-notifications">
     sn:ok
   </subscription-result>
</rpc-reply>
    

Resynch subscription

4.4.5. YANG Module Synchronization

To make subscription requests, the subscriber needs to know the YANG module library available on the publisher. The YANG 1.0 module library information is sent by a NETCONF server in the NETCONF "hello" message. For YANG 1.1 modules and all modules used with the RESTCONF [RFC8040] protocol, this information is provided by the YANG Library module (ietf-yang-library.yang from [RFC7895]. This YANG library information is important for the receiver to reproduce the set of object definitions used within the publisher.

The YANG library includes a module list with the name, revision, enabled features, and applied deviations for each YANG module implemented by the publisher. The receiver is expected to know the YANG library information before starting a subscription. The "/modules-state/module-set-id" leaf in the "ietf-yang-library" module can be used to cache the YANG library information.

The set of modules, revisions, features, and deviations can change at run-time (if supported by the publisher implementation). In this case, the receiver needs to be informed of module changes before datastore nodes from changed modules can be processed correctly. The YANG library provides a simple "yang-library-change" notification that informs the subscriber that the library has changed. The receiver then needs to re-read the entire YANG library data for the replicated publisher in order to detect the specific YANG library changes. The "ietf-netconf-notifications" module defined in [RFC6470] contains a "netconf-capability-change" notification that can identify specific module changes. For example, the module URI capability of a newly loaded module will be listed in the "added-capability" leaf-list, and the module URI capability of an removed module will be listed in the "deleted-capability" leaf-list.

5. YANG module

<CODE BEGINS>; file "ietf-yang-push.yang"
module ietf-yang-push {
  yang-version 1.1;
  namespace "urn:ietf:params:xml:ns:yang:ietf-yang-push";
  prefix yp;

  import ietf-yang-types {
    prefix yang;
  }
  import ietf-subscribed-notifications {
    prefix sn;
  }
  import ietf-datastores {
    prefix ds;
  } 
  
  organization "IETF";
  contact
    "WG Web:   <http://tools.ietf.org/wg/netconf/>
     WG List:  <mailto:netconf@ietf.org>

     Editor:   Alexander Clemm
               <mailto:ludwig@clemm.org>
     
     Editor:   Eric Voit
               <mailto:evoit@cisco.com>

     Editor:   Alberto Gonzalez Prieto
               <mailto:agonzalezpri@vmware.com>
               
     Editor:   Ambika Prasad Tripathy
               <mailto:ambtripa@cisco.com>
               
     Editor:   Einar Nilsen-Nygaard
               <mailto:einarnn@cisco.com>
               
     Editor:   Andy Bierman
               <mailto:andy@yumaworks.com>
     
     Editor:   Balazs Lengyel
               <mailto:balazs.lengyel@ericsson.com>";
               
  description
    "This module contains YANG specifications for YANG push.";

  revision 2017-12-20 {
    description
      "Initial revision.";
    reference 
      "draft-ietf-netconf-yang-push-12";
  }

 /*
  * EXTENSIONS
  */
  
  extension notifiable-on-change {
    argument "value";
    description
      "Indicates whether changes to the datastore node are reportable in
      on-change subscriptions.

      The statement MUST only be a substatement of the leaf, leaf-list,
      container, list, anyxml, anydata  statements. Zero or One
      notifiable-on-change statement is allowed per parent statement. 
      NO substatements are allowed.

      The argument is a boolean value indicating whether on-change
      notifications are supported. If notifiable-on-change is not
      specified, the default is the same as the parent datastore node's
      value. For top level datastore nodes the default value is false.";
  }

 /*
  * FEATURES
  */
    
  feature on-change {
    description
      "This feature indicates that on-change triggered subscriptions 
       are supported.";
  }

 /*
  * IDENTITIES
  */
  
  /* Error type identities for datastore subscription  */
  identity period-unsupported {
    base sn:error;
    description 
      "Requested time period is too short. This can be for both 
       periodic and on-change dampening.";
  }
  
  identity on-change-unsupported {
    base sn:error;
    description 
      "On-change is not supported for any objects which are selectable 
      by this filter.";
  }
  
  identity on-change-synch-unsupported {
    base sn:error;
    description 
      "Neither synch on start nor resynchonization are supported for 
      this subscription.  This error will be used for two reasons. First
      if an 'establish-subscription' RPC doesn't include 
      'no-synch-on-start', yet the publisher can't support sending a 
      'push update' for this subscription for reasons other that 
      'on-change-unsupported' or 'result-too-big'.  And second, if the
      'resynch-subscription' RPC is invoked either for an existing 
      periodic subscription, or for an on-change subscription which 
      can't support resynchronization.";
  }
   
  identity data-unavailable {
    base sn:error;
    description 
      "Referenced datatree node or subtree doesn't exist, or read 
       access is not permitted.";
  }
  
  identity result-too-big {
    base sn:error;
    description 
      "Resulting periodic or on-change push updates may exceed a size 
      limit during normal conditions.";
  }
  
  identity synchronization-size {
    base sn:error;
    description 
      "The resulting synch-on-start or resynchronization would push a 
      datatree which exceeds size limit for a one-time update.";
  }

  identity datastore-not-subscribable {
    base sn:error;
    description 
      "This is not a subscribable datastore.";
  }
   
  /*
   * TYPE DEFINITIONS
   */
   
  typedef change-type {
    type enumeration {
      enum "create" {
        description
          "Create a new data resource if it does not already exist.  If
          it already exists, replace.";
      }
      enum "delete" {
        description
          "Delete a data resource if it already exists. If it does not
          exists, take no action.";
      }
      enum "insert" {
        description
          "Insert a new user-ordered data resource";
      }
      enum "merge" {
        description
          "merge the edit value with the target data resource; create 
          if it does not already exist";
      }
      enum "move" {
        description
          "Reorder the target data resource";
      }
      enum "replace" {
        description
          "Replace the target data resource with the edit value";
      }
      enum "remove" {
        description
          "Remove a data resource if it already exists ";
      }
    }
    description
      "Specifies different types of datastore changes.";
    reference 
      "RFC 8072 section 2.5, with a delta that it is valid for a 
      receiver to process an update record which performs a create 
      operation on a datastore node the receiver believes exists, or to 
      process a delete on a datastore node the receiver believes is 
      missing.";
  }

  typedef selection-filter-ref {
    type leafref {
      path "/sn:filters/yp:selection-filter/yp:identifier";
    }
    description
      "This type is used to reference a selection filter.";
  }

  /*
   * GROUP DEFINITIONS
   */

  grouping datastore-criteria {
    description
      "A grouping to define criteria for which selected objects from  
       a targeted datastore should be included in push updates.";
    leaf datastore {
       type identityref {
         base ds:datastore;
       }
       mandatory true;
       description
         "Datastore from which to retrieve data.";
    }
    uses selection-filter-objects;
  }
  
  grouping selection-filter-types {
    description
      "This grouping defines a selector for objects from a
       datastore.";
    choice filter-spec {
      description
        "The content filter specification for this request.";
      anydata datastore-subtree-filter {
        if-feature "sn:subtree";
        description
          "This parameter identifies the portions of the
           target datastore to retrieve.";
      }
      leaf datastore-xpath-filter {
        if-feature "sn:xpath";
        type yang:xpath1.0;
        description
          "This parameter contains an XPath expression identifying the 
          portions of the target datastore to retrieve.
          
          If the expression returns a node-set, all nodes in the 
          node-set are selected by the filter.  Otherwise, if the
          expression does not return a node-set, the filter
          doesn't select any nodes.

          The expression is evaluated in the following XPath context:

           o  The set of namespace declarations are those in scope on
              the 'xpath-filter' leaf element.
              
           o  The set of variable bindings is empty.
           
           o  The function library is the core function library, and
              the XPath functions defined in section 10 in RFC 7950.
              
           o  The context node is the root node of the target 
              datastore.";
      }
    }   
  }
  
  grouping selection-filter-objects {
    description
      "This grouping defines a selector for objects from a 
       datastore."; 
    choice selected-content {
      description
        "The source of the selection filter applied to the subscription.
        This will come either referenced from a global list, or be 
        provided within the subscription itself.";
      case by-reference {
        description
          "Incorporate a filter that has been configured separately.";
        leaf selection-filter-ref {
          type selection-filter-ref;
          mandatory true;
          description
            "References an existing selection filter which is to be 
             applied to the subscription.";
        }
      }
      case within-subscription {
        description
          "Local definition allows a filter to have the same lifecycle  
          as the subscription.";
        uses selection-filter-types;
        
      }
    }
  }    
   
  grouping update-policy-modifiable {
    description
      "This grouping describes the datastore specific subscription 
       conditions that can be changed during the lifetime of the
       subscription.";
    choice update-trigger {
      when "../yp:target/yp:datastore/yp:datastore"; 
      mandatory true;
      description
        "Defines necessary conditions for sending an event record to
         the subscriber.";
      case periodic {
        container periodic {
          presence "indicates an periodic subscription";
          description
            "The publisher is requested to notify periodically the  
            current values of the datastore as defined by the selection 
            filter.";
          leaf period {
            type yang:timeticks;
            mandatory true;
            description
              "Duration of time which should occur between periodic 
               push updates.  Where the anchor-time is 
               available, the push will include the objects and their 
               values which exist at an exact multiple of timeticks 
               aligning to this start-time anchor.";
          }
          leaf anchor-time {
            type yang:date-and-time;
            description
              "Designates a timestamp before or after which a series of 
               periodic push updates are determined. The next update  
               will take place at a whole multiple interval from the  
               anchor time.  For example, for an anchor time is set for  
               the top of a particular minute and a period interval of a  
               minute, updates will be sent at the top of every minute  
               this subscription is active.";
          }
        }
      }
      case on-change {
        if-feature "on-change";
        container on-change {
          presence "indicates an on-change subscription";
        description
            "The publisher is requested to notify changes in values in
             the datastore subset as defined by a selection filter.";
          leaf dampening-period {
            type yang:timeticks;
            default 0;
            description
              "Specifies the minimum interval between the assembly of 
                successive update records for a single receiver of a 
              subscription. Whenever subscribed objects change, and a 
              dampening period interval (which may be zero) has elapsed 
              since the previous update record creation for a receiver, 
              then any subscribed objects and properties which have 
              changed since the previous update record will have their 
              current values marshalled and placed into a new update 
              record.";
          }
        }
      }
    }
  }

  grouping update-policy {
    description
      "This grouping describes the datastore specific subscription 
       conditions of a subscription.";
    uses update-policy-modifiable {
      augment "update-trigger/on-change/on-change" {
        description
          "Includes objects not modifiable once subscription is 
           established.";
        leaf no-synch-on-start {
          type empty;
          description
            "The presence of this object restricts an on-change 
             subscription from sending push-update notifications.  When 
             present, pushing a full selection per the terms of the
             selection filter MUST NOT be done for this subscription. 
             Only updates about changes, i.e. only push-change-update 
             notifications are sent. When absent (default behavior), 
             in order to facilitate a receiver's synchronization, a full
             update is sent when the subscription starts using a 
             push-update notification, just like in the case of a 
             periodic subscription.  After that, push-change-update 
             notifications are exclusively sent unless the publisher 
             chooses to resynch the subscription via a new push-update
             notification.";
        }
        leaf-list excluded-change {
          type change-type;
          description
            "Use to restrict which changes trigger an update.
             For example, if modify is excluded, only creation and
             deletion of objects is reported.";
        }
      }
    }
  }

  grouping update-error-hints {
    description 
      "Allow return additional negotiation hints that apply
       specifically to push updates."; 
    leaf period-hint { 
      type yang:timeticks;
      description
        "Returned when the requested time period is too short. This 
         hint can assert an viable period for both periodic push  
         cadence and on-change dampening.";
    }
    leaf error-path { 
      type string;
      description
        "Reference to a YANG path which is associated with the error 
         being returned.";
    }
    leaf object-count-estimate { 
      type uint32;
      description
        "If there are too many objects which could potentially be 
         returned by the selection filter, this identifies the estimate 
         of the number of objects which the filter would potentially 
         pass.";
    }
    leaf object-count-limit { 
      type uint32;
      description
        "If there are too many objects which could be returned by the 
         selection filter, this identifies the upper limit of the 
         publisher's ability to service for this subscription.";
    }
    leaf kilobytes-estimate { 
      type uint32;
      description
        "If the returned information could be beyond the capacity of  
         the publisher, this would identify the data size which could 
         result from this selection filter.";
    }
    leaf kilobytes-limit { 
      type uint32;
      description
        "If the returned information would be beyond the capacity of 
         the publisher, this identifies the upper limit of the 
         publisher's ability to service for this subscription.";
    }
  }  

  /*
   * RPCs
   */
 
   rpc resynch-subscription {
    if-feature "on-change";
    description
      "This RPC allows a subscriber of an active on-change 
       subscription to request a full push of objects in there current 
       state. A successful result would be the set of YANG objects 
       equivalent to a Get using the existing selection criteria. This 
       request may only come from the same subscriber using the 
       establish-subscription RPC.";
    input {
      leaf identifier {
        type sn:subscription-id;
        mandatory true;
        description
          "Identifier of the subscription that is to be resynched.";
      }
    }
    output {
      leaf subscription-result {
        type sn:subscription-result;
        mandatory true;
        description
          "Indicates whether the request for the subscription resynch
          has been accepted, or why it has been denied.";
      }
    }
  }

  /*
   * DATA NODES
   */
  
  augment "/sn:establish-subscription/sn:input" {
    when "sn:target/yp:datastore/yp:datastore";
    description 
      "This augmentation adds additional subscription parameters that 
      apply specifically to datastore updates to RPC input.";
    uses update-policy;
  }
  augment "/sn:establish-subscription/sn:input/sn:target" {
    description
      "This augmentation adds the datastore as a valid parameter object
      for the subscription to RPC input.  This provides a target for 
      the filter.";
    case datastore {
       uses datastore-criteria;
    }
  } 
  augment "/sn:establish-subscription/sn:output/"+
    "sn:result/sn:no-success" {
    description
      "This augmentation adds datastore specific error info 
      and hints to RPC output.";
    uses update-error-hints;
  } 
  augment "/sn:modify-subscription/sn:input" {
    description 
      "This augmentation adds additional subscription parameters
       specific to datastore updates.";
    uses update-policy-modifiable;
  }
  augment "/sn:modify-subscription/sn:input/sn:target" {
    description
      "This augmentation adds the datastore as a valid parameter object
      for the subscription to RPC input.  This provides a target for 
      the filter.";
    case datastore {
       uses selection-filter-objects;
    }
  }
  augment "/sn:modify-subscription/sn:output/"+
    "sn:result/sn:no-success" {
    description
      "This augmentation adds push datastore error info and hints to 
      RPC output.";
    uses update-error-hints;
  }
  
  notification push-update {
    description
      "This notification contains a push update, containing data 
       subscribed to via a subscription. This notification is sent for 
       periodic updates, for a periodic subscription.  It can also be 
       used for synchronization updates of an on-change subscription. 
       This notification shall only be sent to receivers of a 
       subscription; it does not constitute a general-purpose
       notification.";
    leaf subscription-id {
      type sn:subscription-id;
      description
        "This references the subscription which drove the notification
         to be sent.";
    }
    leaf updates-not-sent {
      type empty;
      description
        "This is a flag which indicates that not all datastore nodes 
         subscribed to are included with this update. In other words, 
         the publisher has failed to fulfill its full subscription 
         obligations, and despite its best efforts is providing an 
         incomplete set of objects.";
    }
    anydata datastore-contents {
      description
        "This contains the updated data.  It constitutes a snapshot 
         at the time-of-update of the set of data that has been 
         subscribed to.  The format and syntax of the data 
         corresponds to the format and syntax of data that would be 
         returned in a corresponding get operation with the same 
         selection filter parameters applied.";
    }        
  }
  
  notification push-change-update {
    if-feature "on-change";
    description
      "This notification contains an on-change push update. This 
       notification shall only be sent to the receivers of a 
       subscription; it does not constitute a general-purpose
       notification.";
    leaf subscription-id {
      type sn:subscription-id;
      description
        "This references the subscription which drove the notification
         to be sent.";
    }
    leaf updates-not-sent {
      type empty;
      description
        "The presence of this object indicates not all changes which
         have occurred since the last update are included with this 
         update.  In other words, the publisher has failed to 
         fulfill its full subscription obligations, for example in 
         cases where it was not able to keep up with a change burst.";
    }
    anydata datastore-changes {
      description
        "This contains the set of datastore changes needed 
         to update a remote datastore starting at the time of the        
         previous update, per the terms of the subscription.  Changes 
         are encoded analogous to the syntax of a corresponding yang-
         patch operation, i.e. a yang-patch operation applied to the 
         datastore implied by the previous update to result in the
         current state.";
      reference 
        "RFC 8072 section 2.5, with a delta that it is ok to receive 
         ability create on an existing node, or receive a delete on a 
         missing node.";
    }
  }

  augment "/sn:subscription-started" {
    description
      "This augmentation adds many datastore specific objects to 
       the notification that a subscription has started.";
    uses update-policy;
  }
  augment "/sn:subscription-started/sn:target" {
    description
      "This augmentation allows the datastore to be included as part 
       of the notification that a subscription has started.";
    case datastore {
       uses datastore-criteria {
          refine "selected-content/within-subscription" {
          description 
            "Specifies where the selection filter, and where came from
            within the subscription and then populated within this 
            notification. If the 'selection-filter-ref' is populated, 
            the filter within the subscription came from the 'filters' 
            container.  Otherwise it is populated in-line as part of the 
            subscription itself.";
        }       
      }
    }
  }
  
  augment "/sn:filters" {
    description
      "This augmentation allows the datastore to be included as part
       of the selection filtering criteria for a subscription.";
    list selection-filter {
      key "identifier";
      description
        "A list of pre-positioned filters that can be applied
         to datastore subscriptions.";
      leaf identifier {
        type sn:filter-id;
        description
          "An identifier to differentiate between selection filters.";
      }
      uses selection-filter-types;
    }
  }
  augment "/sn:subscription-modified" {
    description
      "This augmentation adds many datastore specific objects to 
       the notification that a subscription has been modified.";
    uses update-policy;
  }
  augment "/sn:subscription-modified/sn:target" {
    description
      "This augmentation allows the datastore to be included as part 
      of the notification that a subscription has been modified.";
    case datastore {
       uses datastore-criteria {
          refine "selected-content/within-subscription" {
          description 
            "Specifies where the selection filter, and where came from
            within the subscription and then populated within this 
            notification. If the 'selection-filter-ref' is populated, 
            the filter within the subscription came from the 'filters' 
            container.  Otherwise it is populated in-line as part of the 
            subscription itself.";
        }       
      }
    }
  }
  
  augment "/sn:subscription-config/sn:subscription" {
    description
      "This augmentation adds many datastore specific objects 
      which can be configured as opposed to established via RPC.";
    uses update-policy;
  }
  augment "/sn:subscription-config/sn:subscription/sn:target" {
    description
      "This augmentation adds the datastore to the selection filtering 
      criteria for a subscription.";
    case datastore {
       uses datastore-criteria;
    }
  }
  augment "/sn:subscriptions/sn:subscription" {
    yp:notifiable-on-change true;
    description
      "This augmentation adds many datastore specific objects to a 
       subscription.";
    uses update-policy;
  }
  augment "/sn:subscriptions/sn:subscription/sn:target" {
    description
      "This augmentation allows the datastore to be included as part 
      of the selection filtering criteria for a subscription.";
    case datastore {
       uses datastore-criteria;
    }
  } 

/* YANG Parser Pyang crashing on syntax below, due to fixed bug
         https://github.com/mbj4668/pyang/issues/300 
         
  deviation "/sn:subscriptions/sn:subscription/sn:receivers/"
             + "sn:receiver/sn:pushed-notifications" {
    deviate add {
      yp:notifiable-on-change false;
    }
  }
  deviation "/sn:subscriptions/sn:subscription/sn:receivers/"
             + "sn:receiver/sn:excluded-notifications" {
    deviate add {
      yp:notifiable-on-change false;
    }
  }
YANG Parser Pyang crashing on syntax above */
}  


<CODE ENDS> 

6. IANA Considerations

This document registers the following namespace URI in the "IETF XML Registry" [RFC3688]:

URI: urn:ietf:params:xml:ns:yang:ietf-yang-push
Registrant Contact: The IESG.
XML: N/A; the requested URI is an XML namespace.

This document registers the following YANG module in the "YANG Module Names" registry [RFC6020]:

Name: ietf-yang-push
Namespace: urn:ietf:params:xml:ns:yang:ietf-yang-push
Prefix: yp
Reference: draft-ietf-netconf-yang-push-12.txt (RFC form)

7. Security Considerations

All security considerations from [I-D.draft-ietf-netconf-subscribed-notifications] are relevant for datastores. In addition there are specific security considerations for receivers defined in Section 3.9

If the access control permissions on subscribed YANG nodes change during the lifecycle of a subscription, a publisher MUST either transparently conform to the new access control permissions, or must terminate or restart the subscriptions so that new access control permissions are re-established.

The NETCONF Authorization Control Model SHOULD be used to restrict the delivery of YANG nodes for which the receiver has no access.

8. Acknowledgments

For their valuable comments, discussions, and feedback, we wish to acknowledge Tim Jenkins, Kent Watsen, Susan Hares, Yang Geng, Peipei Guo, Michael Scharf, Martin Bjorklund, and Guangying Zheng.

9. References

9.1. Normative References

[I-D.draft-ietf-netconf-subscribed-notifications] Voit, E., Clemm, A., Gonzalez Prieto, A., Tripathy, A. and E. Nilsen-Nygaard, "Custom Subscription to Event Streams", Internet-Draft draft-ietf-netconf-subscribed-notifications-06, October 2017.
[I-D.draft-ietf-netmod-revised-datastores] Bjorklund, M., Schoenwaelder, J., Shafer, P., Watsen, K. and R. Wilton, "Network Management Datastore Architecture", Internet-Draft draft-ietf-netmod-revised-datastores-04, August 2017.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, DOI 10.17487/RFC3688, January 2004.
[RFC6020] Bjorklund, M., "YANG - A Data Modeling Language for the Network Configuration Protocol (NETCONF)", RFC 6020, DOI 10.17487/RFC6020, October 2010.
[RFC6470] Bierman, A., "Network Configuration Protocol (NETCONF) Base Notifications", RFC 6470, DOI 10.17487/RFC6470, February 2012.
[RFC6536bis] Bierman, A. and M. Bjorklund, "Network Configuration Protocol (NETCONF) Access Control Model", Internet-Draft draft-ietf-netconf-rfc6536bis-05, September 2017.
[RFC7895] Bierman, A., Bjorklund, M. and K. Watsen, "YANG Module Library", RFC 7895, DOI 10.17487/RFC7895, June 2016.
[RFC8072] Bierman, A., Bjorklund, M. and K. Watsen, "YANG Patch Media Type", RFC 8072, DOI 10.17487/RFC8072, February 2017.

9.2. Informative References

[I-D.draft-ietf-netconf-netconf-event-notifications] Gonzalez Prieto, A., Clemm, A., Voit, E., Nilsen-Nygaard, E. and A. Tripathy, "NETCONF Support for Event Notifications", September 2017.
[RFC5277] Chisholm, S. and H. Trevino, "NETCONF Event Notifications", RFC 5277, DOI 10.17487/RFC5277, July 2008.
[RFC6241] Enns, R., Bjorklund, M., Schoenwaelder, J. and A. Bierman, "Network Configuration Protocol (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011.
[RFC7223] Bjorklund, M., "A YANG Data Model for Interface Management", RFC 7223, DOI 10.17487/RFC7223, May 2014.
[RFC7923] Voit, E., Clemm, A. and A. Gonzalez Prieto, "Requirements for Subscription to YANG Datastores", RFC 7923, DOI 10.17487/RFC7923, June 2016.
[RFC8040] Bierman, A., Bjorklund, M. and K. Watsen, "RESTCONF Protocol", RFC 8040, DOI 10.17487/RFC8040, January 2017.

Appendix A. Changes between revisions

(To be removed by RFC editor prior to publication)

v11 - v12

v10 - v11

v09 - v10

v08 - v09

v07 - v08

v06 - v07

v05 - v06

v04 to v05

v03 to v04

Authors' Addresses

Alexander Clemm Huawei EMail: ludwig@clemm.org
Eric Voit Cisco Systems EMail: evoit@cisco.com
Alberto Gonzalez Prieto VMware EMail: agonzalezpri@vmware.com
Ambika Prasad Tripathy Cisco Systems EMail: ambtripa@cisco.com
Einar Nilsen-Nygaard Cisco Systems EMail: einarnn@cisco.com
Andy Bierman YumaWorks EMail: andy@yumaworks.com
Balazs Lengyel Ericsson EMail: balazs.lengyel@ericsson.com