NETCONF Working Group K. Watsen
Internet-Draft Juniper Networks
Updates: 4253 (if approved) June 19, 2013
Intended status: Standards Track
Expires: December 21, 2013
Reverse Secure Shell (Reverse SSH)
draft-ietf-netconf-reverse-ssh-01
Abstract
This memo presents a technique for a NETCONF server to initiate a SSH
connection to a NETCONF client. This is accomplished by the NETCONF
client listening on IANA-assigned TCP port YYYY and starting the SSH
client protocol immediately after accepting a TCP connection on it.
This role-reversal is necessary as the NETCONF server must also be
the SSH Server, in order for the NETCONF client to open the IANA-
assigned SSH subsystem "netconf".
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on December 21, 2013.
Copyright Notice
Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
Watsen Expires December 21, 2013 [Page 1]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Requirements Terminology . . . . . . . . . . . . . . . . . . 2
2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
3. Benefits to Device Management . . . . . . . . . . . . . . . . 2
4. The Reverse SSH Protocol . . . . . . . . . . . . . . . . . . 3
5. Device Configuration . . . . . . . . . . . . . . . . . . . . 4
6. Security Considerations . . . . . . . . . . . . . . . . . . . 10
7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12
8. Normative References . . . . . . . . . . . . . . . . . . . . 12
1. Requirements Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
2. Introduction
This memo presents a technique for a NETCONF [RFC6241] server to
initiate a Secure Shell (SSH) [RFC4251] connection to a NETCONF
client. This is accomplished by the NETCONF client listening on
IANA-assigned TCP port YYYY and starting the SSH client protocol
immediately after accepting a TCP connection on it. This role-
reversal is necessary as the NETCONF server must also be the SSH
Server, in order for the NETCONF client to open the IANA-assigned SSH
subsystem "netconf" [RFC6242].
While the motivation for this work is for the NETCONF protocol, the
solution is not specific to NETCONF and is applicable any time it is
desired for a SSH server to initiate a connection to a SSH client.
For this reason, the solution is given the generic name "Reverse SSH"
and the port the remote peer listens on is the Reverse SSH port.
3. Benefits to Device Management
The SSH protocol is nearly ubiquitous for device management, as it is
the transport for the command-line applications `ssh`, `scp`, and
`sftp` and is the required transport for the NETCONF protocol
[RFC6241]. However, all these SSH-based protocols expect the managed
device to be the SSH server.
Reverse SSH enables the managed device to consistently be the SSH
server regardless of which peer initiates the underlying TCP
Watsen Expires December 21, 2013 [Page 2]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
connection. Maintaining the role of SSH Server is both necessary and
desirable. It is necessary because SSH channels and subsystems can
only be opened on the SSH Server. It is desirable because it
conviently leverages infrastructure that may be deployed for host-key
verification and user authentication.
Reverse SSH is useful for both initial deployment and on-going device
management and may be used to enable any of the following scenarios:
o The device may proactively "call home" after being powered on for
the first time to register itself with its management system.
o The managed device may access the network in a way that
dynamically assigns it an IP address and it doesn't register its
assigned IP addressed to a mapping service.
o The managed device may be configured in "stealth mode" and thus
doesn't have any open ports.
o The managed device may be deployed behind a firewall that doesn't
allow SSH access to the internal network.
o The managed device may be deployed behind a firewall that
implements network address translation (NAT) for all internal
network IP addresses.
o The operator may prefer to have managed devices initiate
management connections believing it is easier to secure one open-
port in the data center than to have an open port on each managed
device in the network.
One key benefit of using SSH as the transport protocol is its ability
to multiplex an unspecified number of independently flow-controlled
TCP sessions [RFC4254]. This is valuable as the managed device only
needs to be configured to initiate a single Reverse SSH connection
regardless the number of TCP-based protocols the application wishes
to support. For instance, the application may "pin up" a channel for
each distinct type of asynchronous notification the managed device
supports (logs, traps, backups, etc.) and dynamically open/close
channels as needed by its runtime.
4. The Reverse SSH Protocol
The NETCONF server's perspective
o The NETCONF server initiates a TCP connection to the NETCONF
client on the IANA-assigned Reverse SSH port YYYY.
Watsen Expires December 21, 2013 [Page 3]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
o Immediately after the TCP session starts, the NETCONF server
starts the SSH server protocol using the accepted TCP connection.
That is, the NETCONF Server sends its SSH host key during the SSH
key exchange.
The NETCONF client's perspective
o The NETCONF client listens for TCP connections on the IANA-
assigned SSH port YYYY.
o The NETCONF client accepts an incoming TCP connection and
immediately starts the SSH client protocol. That is, the NETCONF
client will need to authenticate its peer's SSH host key during
the SSH key exchange.
This document updates the SSH Transport Layer Protocol [RFC4253] only
by removing the restriction in Section 4 (Connection Setup) of
[RFC4252] that the SSH Client must initiate the transport connection.
Security implications related to this change are discussed in the
Security Considerations (Section 6) section.
For first-time connections, in order for the NETCONF client to
authenticate the NETCONF server, a public host key algorithm that
certifies the the NETCONF server's identity and host-key SHOULD be
used. Examples of suitable public host key algorithms are the
x509v3-* algorithms defined in [RFC6187].
5. Device Configuration
For devices supporting NETCONF, this section defines a YANG [RFC6020]
module to configure Reverse SSH on the device. For devices that do
not support NETCONF, this section illustrates what its configuration
data model SHOULD include.
This YANG module enables a NETCONF client to generically manage a
NETCONF server's Reverse SSH configuration. Key aspects of this YANG
module include support for more than one application, more than one
server per application, and a reconnection strategy.
This RFC does not attempt to define any strategy for how an initial
deployment might obtain its bootstrapping "call home" configuration,
as defined by this YANG module. That said, implementations may
consider fetching configuration from a server identified via the DHCP
protocol or loading it off a USB drive plugged into the device before
being powered on.
Configuration Example
Watsen Expires December 21, 2013 [Page 4]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
config-mgr
This entry requests the device to periodically
connect to the Configuration Manager application
config-mgr1.acme.com
7022
config-mgr2.acme.com
7022
5
20
ssh_host_key_cert
ssh_host_key_cert2
5
3
last-connected
10
4
log-monitor
This entry requests the device to mantain a
persistent connection to the Log Monitoring
application
Watsen Expires December 21, 2013 [Page 5]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
log-mon1.acme.com
7514
log-monitor2.acme.com
7514
ssh_host_key_hmac
5
3
last-connected
10
4
The YANG Module
module ietf-reverse-ssh {
namespace "urn:ietf:params:xml:ns:yang:ietf-reverse-ssh";
prefix "rssh";
import ietf-inet-types { prefix inet; }
organization
"IETF NETCONF (Network Configuration Protocol) Working Group";
contact
"WG Web:
WG List:
WG Chair: Bert Wijnen
Watsen Expires December 21, 2013 [Page 6]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
WG Chair: Mehmet Ersue
Editor: Kent Watsen
";
revision 2013-06-18 {
description "Initial conception";
reference "RFC XXXX: Reverse SSH";
}
// RFC Ed.: replace XXXX with actual
// RFC number and remove this note
container reverse-ssh {
container applications {
description
"All the application that the device
initiates Reverse SSH connections to";
list application {
key name;
min-elements 1;
leaf name {
mandatory true;
type string {
length 1..32;
}
description
"The name of the application the device is
connecting to";
}
leaf description {
type string;
description
"An optional description for the application";
}
container servers {
description
"An ordered listing of the application's
servers that the device should attempt
connecting to.";
list server {
key host;
min-elements 1;
ordered-by user;
Watsen Expires December 21, 2013 [Page 7]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
leaf host {
mandatory true;
type inet:host;
description
"IP address or domain-name for
the server";
}
leaf port {
type inet:port-number;
description
"The IP port for this server.
The device will use the
IANA-assigned port if not
specified.";
}
}
}
choice connection-type {
description "Indicates the application's
preference for how the device's
connection is maintained.";
default persistent-connection;
leaf persistent-connection {
type empty;
}
container periodic-connection {
leaf timeout-mins {
type uint8;
default 5;
units minutes;
description
"The maximum amount of unconnected
time the device will wait until
establishing a connection to the
applications again to send it.
The device may establish a
connection before this time if
it has data it needs to send to
the device.";
}
leaf linger-secs {
type uint8;
default 30;
units seconds;
description
"The amount of time the device should
wait after last receiving data from
Watsen Expires December 21, 2013 [Page 8]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
or sending data to the device before
closing its connection to the app.";
}
}
}
container host-keys {
description
"An ordered listing of the SSH host keys the
device should advertise to the application.";
list host-key {
key name;
min-elements 1;
ordered-by user;
leaf name {
mandatory true;
type string {
length 1..64;
}
description
"The name of a host key the device
should advertise during the SSH
key exchange.";
}
}
}
container keep-alive-strategy {
leaf interval-secs {
type uint8;
units seconds;
default 15;
description
"Sets a timeout interval in seconds after
which if no data has been received from
the client, a message will be sent to
request a response from the SSH client.
A value of '0' indicates that no messages
should be sent.";
}
leaf count-max {
type uint8;
default 3;
description
"Sets the number of keep alive messages
that may be sent without receiving any
response from the SSH client before
assuming the SSH client is no longer
alive. If this threshold is reached
the device will disconnect the SSH
Watsen Expires December 21, 2013 [Page 9]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
session. The keep alive interval timer
is reset after each transmission. Thus,
an unresponsive SSH client will be
disconnected after approximately
'count-max * interval-secs' seconds.";
}
}
container reconnect-strategy {
leaf start-with {
default first-listed;
type enumeration {
enum first-listed;
enum last-connected;
}
}
leaf interval-secs {
type uint8;
units seconds;
default 5;
description
"time delay between connection attempts";
}
leaf count-max {
type uint8;
default 3;
description
"num times try to connect to a server";
}
}
}
}
}
}
6. Security Considerations
This RFC deviates from standard SSH protocol usage by allowing the
SSH server to initiate the TCP connection. This conflicts with
section 4 of the SSH Transport Layer Protocol RFC [RFC4253], which
states "The client initiates the connection". However this statement
is made without rationalization and it's not clear how it impacts the
security of the protocol, so this section analyzes the security
offered by the having the client initiate the connection.
First, assuming the SSH server is not using a public host key
algorithm that certifies its identity, the security of the protocol
doesn't seem to be sensitive to which peer initiates the connection.
That is, it is still the case that reliable distribution of host keys
Watsen Expires December 21, 2013 [Page 10]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
(or their fingerprints) should occur prior to first connection and
that verification for subsequent connections happens by comparing the
host keys in locally cached database. It does not seem to matter if
the SSH Server's host name is derived from user-input or extracted
from the TCP layer, potentially via a reverse-DNS lookup. Once the
host name-to-key association is stored in a local database, no man-
in-the-middle attack is possible due to the attacker being unable to
guess the real SSH server's private key (Section 9.3.4 (Man-in-th-
middle) of [RFC4251]).
That said, this RFC recommends implementations use a public host key
algorithm that certifies the SSH server's identity. The identity can
be any unique identifier, such as a device's serial number or a
deployment-specific value. If this recommendation is followed, then
no information from the TCP layer would be needed to lookup the
device in a local database and therefore the directionality of the
TCP layer is clearly inconsequential.
The SSH protocol negotiates which algorithms it will use during key
exchange (Section 7.1 (Algortihm Negotition) in [RFC4253]). The
algorithm selected is essentially the first compatible algorithm
listed by the SSH client that is also listed by the SSH server. For
a network management application, there may be a need to advertise a
large number of algorithms to be compatible with the various devices
it manages. It is RECOMMENDED that the SSH client orders its list of
public host key algorithms such that all the certifiable public host
key algorithms are listed first. Additionally, when possible, SSH
servers SHOULD only list certifiable public host key algorithms.
Note that since the SSH server would have to be configured to know
which IP address it needs to connect to, it is expected that it will
also be configured to know which host key algorithm to use for the
particular application, and hence only needs to list just that one
public host key algorithm.
This RFC suggests implementations can use a device's serial number as
a form of identity. A potential concern with using a serial number
is that the SSH protocol passes the SSH server's host-key in the
clear and many times serial numbers encode revealing information
about the device, such as what kind of device it is and when it was
manufactured. While there is little security in trying to hide this
information from an attacker, it is understood that some deployments
may want to keep this information private. If this is a concern,
deployments MAY consider using instead a hash of the device's serial
number or an application-specified unique identifier.
An attacker could DoS the application by having it to perform
computationally expensive operations, before deducing that the
attacker doesn't posses a valid key. This is no different than any
Watsen Expires December 21, 2013 [Page 11]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
secured service and all common precautions apply (e.g. blacklisting
the source address after a set number of unsuccessful login
attempts).
7. IANA Considerations
This document requests that IANA assigns a TCP port number in the
"Registered Port Numbers" range with the service name "reverse-ssh".
This port will be the default port for the Reverse SSH protocol and
will be used when the NETCONF server needs to initiate a connection
to a NETCONF client using SSH. Below is the registration template
following the rules in [RFC6335].
Service Name: reverse-ssh
Transport Protocol(s): TCP
Assignee: IESG
Contact: IETF Chair
Description: Reverse SSH (call home)
Reference: RFC XXXX
Port Number: YYYY
8. Normative References
[RFC2104] Krawczyk, H., Bellare, M., and R. Centti, "HMAC: Keyed-
Hashing for Message Authentication ", RFC 2104, February
1997.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels ", BCP 14, RFC 2119, March 1997.
[RFC4250] Lehtinen, S. and C. Lonvick, Ed., "The Secure Shell (SSH)
Protocol Assigned Numbers ", RFC 4250, December 2005.
[RFC4251] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Protocol Architecture ", RFC 4251, January 2006.
[RFC4252] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Authentication Protocol ", RFC 4252, January 2006.
[RFC4253] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Transport Layer Protocol ", RFC 4253, January 2006.
[RFC4254] Ylonen, T. and C. Lonvick, Ed., "The Secure Shell (SSH)
Connection Protocol ", RFC 4254, January 2006.
[RFC6020] Bjorklund, M., Ed., "YANG - A Data Modeling Language for
the Network Configuration Protocol (NETCONF) ", RFC 6020,
October 2010.
Watsen Expires December 21, 2013 [Page 12]
Internet-Draft Reverse Secure Shell (Reverse SSH) June 2013
[RFC6187] Igoe, K. and D. Stebila, "X.509v3 Certificates for Secure
Shell Authentication ", RFC 6187, March 2011.
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "NETCONF Configuration Protocol", RFC
6241, June 2011.
[RFC6242] Wasserman, M., Ed., "Using the NETCONF Protocol over
Secure Shell (SSH)", RFC 6242, June 2011.
[RFC6335] Cotton, M., Ed., Eggert, L., Ed., Touch, J., Ed.,
Westerlund, M., Ed., and S. Cheshire, Ed., "Internet
Assigned Numbers Authority (IANA) Procedures for the
Management of the Service Name and Transport Protocol Port
Number Registry", RFC 6335, August 2011.
Author's Address
Kent Watsen
Juniper Networks
EMail: kwatsen@juniper.net
Watsen Expires December 21, 2013 [Page 13]