Network Working Group Mark Smith, Editor Request for Comments: DRAFT Pearl Crescent, LLC Obsoletes: RFC 2255 Tim Howes Expires: 4 July 2005 Opsware, Inc. 4 January 2005 LDAP: Uniform Resource Locator Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she become aware will be disclosed, in accordance with RFC 3668. This document is intended to be published as a Standards Track RFC, replacing RFC 2255. Distribution of this memo is unlimited. Technical discussion of this document will take place on the IETF LDAP (v3) Revision (ldapbis) Working Group mailing list . Please send editorial comments directly to the editor . Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than a "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.html The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html Copyright (C) The Internet Society (2004). All Rights Reserved. Please see the Full Copyright section near the end of this document for more information. Smith & Howes Intended Category: Standards Track [Page 1] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 Abstract This document describes a format for a Lightweight Directory Access Protocol (LDAP) Uniform Resource Locator (URL). An LDAP URL describes an LDAP search operation that is used to retrieve information from an LDAP directory, or, in the context of an LDAP referral or reference, an LDAP URL describes a service where an LDAP operation may be progressed. Table of Contents Status of this Memo............................................1 Abstract.......................................................2 Table of Contents..............................................2 1. Introduction...................................................2 2. URL Definition.................................................3 2.1. Percent-Encoding............................................5 3. Defaults for Fields of the LDAP URL............................5 4. Examples.......................................................6 5. Security Considerations........................................8 6. IANA Considerations............................................9 7. Normative References...........................................9 8. Informative References.........................................10 9. Acknowledgements...............................................10 10. Authors' Addresses.............................................11 11. Appendix A: Changes Since RFC 2255.............................11 11.1. Technical Changes...........................................11 11.2. Editorial Changes...........................................12 12. Appendix B: Changes Since Previous Document Revision...........14 12.1. Technical Changes...........................................14 12.2. Editorial Changes...........................................14 Intellectual Property Rights...................................14 Full Copyright.................................................15 1. Introduction LDAP is the Lightweight Directory Access Protocol [Roadmap]. This document specifies the LDAP URL format for version 3 of LDAP and clarifies how LDAP URLs are resolved. This document also defines an extension mechanism for LDAP URLs. This mechanism may be used to provide access to new LDAP extensions. Note that not all of the parameters of the LDAP search operation described in [Protocol] can be expressed using the format defined in this document. Note also that URLs may be used to represent reference knowledge, including for non-search operations. Smith & Howes Intended Category: Standards Track [Page 2] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 This document is a integral part of the LDAP technical specification [Roadmap] which obsoletes the previously defined LDAP technical specification, RFC 3377, in its entirety. This document replaces RFC 2255. See Appendix A for a list of changes relative to RFC 2255. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119]. 2. URL Definition An LDAP URL begins with the protocol prefix "ldap" and is defined by the following grammar, following the ABNF notation defined in [RFC2234]. ldapurl = scheme COLON SLASH SLASH [host [COLON port]] [SLASH dn [QUESTION [attributes] [QUESTION [scope] [QUESTION [filter] [QUESTION extensions]]]]] ; and are defined ; in Sections 3.2.2 and 3.2.3 ; of [RFC2396bis]. ; is from Section 3 of ; [Filters], subject to the ; provisions of the ; "Percent-Encoding" section ; below. scheme = "ldap" dn = distinguishedName ; From Section 3 of [LDAPDN], ; subject to the provisions of ; the "Percent-Encoding" ; section below. attributes = attrdesc *(COMMA attrdesc) attrdesc = selector *(COMMA selector) selector = attributeSelector ; From Section 4.5.1 of ; [Protocol], subject to the ; provisions of the ; "Percent-Encoding" section ; below. scope = "base" / "one" / "sub" extensions = extension *(COMMA extension) extension = [EXCLAMATION] extype [EQUALS exvalue] Smith & Howes Intended Category: Standards Track [Page 3] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 extype = oid ; From section 1.4 of [Models]. exvalue = LDAPString ; From section 4.1.2 of ; [Protocol], subject to the ; provisions of the ; "Percent-Encoding" section ; below. EXCLAMATION = %x21 ; exclamation mark ("!") SLASH = %x2F ; forward slash ("/") COLON = %x3A ; colon (":") QUESTION = %x3F ; question mark ("?") The "ldap" prefix indicates an entry or entries accessible from the LDAP server running on the given hostname at the given portnumber. Note that the may contain literal IPv6 addresses as specified in Section 3.2.2 of [RFC2396bis]. The is an LDAP Distinguished Name using the string format described in [LDAPDN]. It identifies the base object of the LDAP search or the target of a non-search operation. The construct is used to indicate which attributes should be returned from the entry or entries. The construct is used to specify the scope of the search to perform in the given LDAP server. The allowable scopes are "base" for a base object search, "one" for a one-level search, or "sub" for a subtree search. The is used to specify the search filter to apply to entries within the specified scope during the search. It has the format specified in [Filters]. The construct provides the LDAP URL with an extensibility mechanism, allowing the capabilities of the URL to be extended in the future. Extensions are a simple comma-separated list of type=value pairs, where the =value portion MAY be omitted for options not requiring it. Each type=value pair is a separate extension. These LDAP URL extensions are not necessarily related to any of the LDAP extension mechanisms. Extensions may be supported or unsupported by the client resolving the URL. An extension prefixed with a '!' character (ASCII 0x21) is critical. An extension not prefixed with a '!' character is non-critical. If an LDAP URL extension is implemented (that is, if the implementation understands it and is able to use it), the Smith & Howes Intended Category: Standards Track [Page 4] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 implementation MUST make use of it. If an extension is not implemented and is marked critical, the implementation MUST NOT process the URL. If an extension is not implemented and it not marked critical, the implementation MUST ignore the extension. The extension type () MAY be specified using the numeric OID form (e.g., 1.2.3.4) or the descriptor form (e.g., myLDAPURLExtension). Use of the form SHOULD be restricted to registered object identifier descriptive names. See [LDAPIANA] for registration details and usage guidelines for descriptive names. No LDAP URL extensions are defined in this document. Other documents or a future version of this document MAY define one or more extensions. 2.1. Percent-Encoding A generated LDAP URL MUST consist only of the restricted set of characters included in one of the following three productions defined in [RFC2396bis]: Implementations SHOULD accept other valid UTF-8 strings [RFC3629] as input. An octet MUST be encoded using the percent-encoding mechanism described in section 2.1 of [RFC2396bis] in any of these situations: The octet is not in the reserved set defined in section 2.2 of [RFC2396bis] or in the unreserved set defined in section 2.3 of [RFC2396bis]. It is the single Reserved character '?' and occurs inside a , , or other element of an LDAP URL. It is a comma character ',' that occurs inside an . Note that before the percent-encoding mechanism is applied, the extensions component of the LDAP URL may contain one or more null (zero) bytes. No other component may. 3. Defaults for Fields of the LDAP URL Some fields of the LDAP URL are optional, as described above. In the absence of any other specification, the following general defaults SHOULD be used when a field is absent. Note that other documents MAY Smith & Howes Intended Category: Standards Track [Page 5] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 specify different defaulting rules; for example, section 4.1.10 of [Protocol] specifies a different rule for determining the correct DN to use when it is absent in an LDAP URL that is returned as a referral. If no is given, the client must have some apriori knowledge of an appropriate LDAP server to contact. The default LDAP port is TCP port 389. If no is given, the default is the zero-length DN, "". If the part is omitted, all user attributes of the entry or entries should be requested (e.g., by setting the attributes field AttributeDescriptionList in the LDAP search request to a NULL list, or by using the special selector "*"). If is omitted, a of "base" is assumed. If is omitted, a filter of "(objectClass=*)" is assumed. If is omitted, no extensions are assumed. 4. Examples The following are some example LDAP URLs using the format defined above. The first example is an LDAP URL referring to the University of Michigan entry, available from an LDAP server of the client's choosing: ldap:///o=University%20of%20Michigan,c=US The next example is an LDAP URL referring to the University of Michigan entry in a particular ldap server: ldap://ldap1.example.net/o=University%20of%20Michigan,c=US Both of these URLs correspond to a base object search of the "o=University of Michigan,c=US" entry using a filter of Smith & Howes Intended Category: Standards Track [Page 6] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 "(objectclass=*)", requesting all attributes. The next example is an LDAP URL referring to only the postalAddress attribute of the University of Michigan entry: ldap://ldap1.example.net/o=University%20of%20Michigan, c=US?postalAddress The corresponding LDAP search operation is the same as in the previous example, except that only the postalAddress attribute is requested. The next example is an LDAP URL referring to the set of entries found by querying the given LDAP server on port 6666 and doing a subtree search of the University of Michigan for any entry with a common name of "Babs Jensen", retrieving all attributes: ldap://ldap1.example.net:6666/o=University%20of%20Michigan, c=US??sub?(cn=Babs%20Jensen) The next example is an LDAP URL referring to all children of the c=GB entry: LDAP://ldap1.example.com/c=GB?objectClass?ONE The objectClass attribute is requested to be returned along with the entries, and the default filter of "(objectclass=*)" is used. The next example is an LDAP URL to retrieve the mail attribute for the LDAP entry named "o=Question?,c=US" is given below, illustrating the use of the percent-encoding mechanism on the reserved character '?'. ldap://ldap2.example.com/o=Question%3f,c=US?mail The next example (which is broken into two lines for readability) illustrates the interaction between the LDAP string representation of filters quoting mechanism and URL quoting mechanisms. ldap://ldap3.example.com/o=Babsco,c=US ???(four-octet=%5c00%5c00%5c00%5c04) The filter in this example uses the LDAP escaping mechanism of \ to encode three zero or null bytes in the value. In LDAP, the filter would be written as (four-octet=\00\00\00\04). Because the \ character must be escaped in a URL, the \'s are percent-encoded as %5c (or %5C) in the URL encoding. Smith & Howes Intended Category: Standards Track [Page 7] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 The next example illustrates the interaction between the LDAP string representation of DNs quoting mechanism and URL quoting mechanisms. ldap://ldap.example.com/o=An%20Example%5C2C%20Inc.,c=US The DN encoded in the above URL is: o=An Example\2C Inc.,c=US That is, the left-most RDN value is: An Example, Inc. The following three URLs that are equivalent, assuming that the defaulting rules specified in section 4 of this document are used: ldap://ldap.example.net ldap://ldap.example.net/ ldap://ldap.example.net/? These three URLs all point to the root DSE on the ldap.example.net server. The final two examples show use of a hypothetical, experimental bind name extension (the value associated with the extension is an LDAP DN). ldap:///??sub??e-bindname=cn=Manager%2cdc=example%2cdc=com ldap:///??sub??!e-bindname=cn=Manager%2cdc=example%2cdc=com The two URLs are the same, except that the second one marks the e-bindname extension as critical. Notice the use of the percent-encoding mechanism to encode the commas within the distinguished name value in the e-bindname extension. 5. Security Considerations General URL security considerations discussed in [RFC2396bis] are relevant for LDAP URLs. The use of security mechanisms when processing LDAP URLs requires particular care, since clients may encounter many different servers via URLs, and since URLs are likely to be processed automatically, without user intervention. A client SHOULD have a user-configurable policy that controls which servers the client will establish LDAP sessions with using which security mechanisms, and SHOULD NOT establish LDAP sessions that are inconsistent with this policy. If a client chooses to reuse an existing LDAP session when resolving one Smith & Howes Intended Category: Standards Track [Page 8] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 or more LDAP URLs, it MUST ensure that the session is compatible with the URL and that no security policies are violated. Sending authentication information, no matter the mechanism, may violate a user's privacy requirements. In the absence of specific policy permitting authentication information to be sent to a server, a client should use an anonymous LDAP session. (Note that clients conforming to previous LDAP URL specifications, where all LDAP sessions are anonymous and unprotected, are consistent with this specification; they simply have the default security policy.) Simply opening a transport connection to another server may violate some users' privacy requirements, so clients should provide the user with a way to control URL processing. Some authentication methods, in particular reusable passwords sent to the server, may reveal easily-abused information to the remote server or to eavesdroppers in transit, and should not be used in URL processing unless explicitly permitted by policy. Confirmation by the human user of the use of authentication information is appropriate in many circumstances. Use of strong authentication methods that do not reveal sensitive information is much preferred. If the URL represents a referral for an update operation, strong authentication methods SHOULD be used. Please refer to the Security Considerations section of [AuthMeth] for more information. The LDAP URL format allows the specification of an arbitrary LDAP search operation to be performed when evaluating the LDAP URL. Following an LDAP URL may cause unexpected results, for example, the retrieval of large amounts of data, the initiation of a long-lived search, etc. The security implications of resolving an LDAP URL are the same as those of resolving an LDAP search query. 6. IANA Considerations This document has no actions for IANA. 7. Normative References [AuthMeth] Harrison, R. (editor), "LDAP: Authentication Methods", draft-ietf-ldapbis-authmeth-xx.txt, a work in progress. a work in progress. [LDAPDN] Zeilenga, K. (editor), "LDAP: String Representation of Distinguished Names", draft-ietf-ldapbis-dn-xx.txt, a work in progress. [Filters] Smith, M. and Howes, T., "LDAP: String Representation of Search Filters", draft-ietf-ldapbis-filter-xx.txt, a work in Smith & Howes Intended Category: Standards Track [Page 9] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 progress. [RFC2119] Bradner, S., "Key Words for use in RFCs to Indicate Requirement Levels," RFC 2119, BCP 14, March 1997. [Protocol] Sermersheim, J. (editor), "LDAP: The Protocol", draft-ietf-ldapbis-protocol-xx.txt, a work in progress. [RFC2234] Crocker, D., Overell, P., "Augmented BNF for Syntax Specifications: ABNF", RFC 2234, November 1997. [RFC2396bis] Berners-Lee, T., Fielding, R. and Masinter, L., "Uniform Resource Identifiers (URI): Generic Syntax", draft-fielding-uri-rfc2396bis-xx.txt, a work in progress. [Roadmap] K. Zeilenga (editor), "LDAP: Technical Specification Road Map", draft-ietf-ldapbis-roadmap-xx.txt, a work in progress. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", RFC 3629, November 2003. 8. Informative References [LDAPIANA] Zeilenga, K., "IANA Considerations for LDAP", draft-ietf-ldapbis-bcp64-xx.txt, a work in progress. None. 9. Acknowledgements The LDAP URL format was originally defined at the University of Michigan. This material is based upon work supported by the National Science Foundation under Grant No. NCR-9416667. The support of both the University of Michigan and the National Science Foundation is gratefully acknowledged. This document is an update to RFC 2255 by Tim Howes and Mark Smith. Changes included in this revised specification are based upon discussions among the authors, discussions within the LDAP (v3) Revision Working Group (ldapbis), and discussions within other IETF Working Groups. The contributions of individuals in these working groups is gratefully acknowledged. Several people in particular have made valuable comments on this document; RL "Bob" Morgan, Mark Wahl, Kurt Zeilenga, Jim Sermersheim, and Hallvard Furuseth deserve special thanks for their contributions. Smith & Howes Intended Category: Standards Track [Page 10] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 10. Authors' Addresses Mark Smith, Editor Pearl Crescent, LLC 447 Marlpool Dr. Saline, MI 48176 USA +1 734 944-2856 mcs@pearlcrescent.com Tim Howes Opsware, Inc. 599 N. Mathilda Ave. Sunnyvale, CA 94085 USA +1 408 744-7509 howes@opsware.com 11. Appendix A: Changes Since RFC 2255 11.1. Technical Changes The following technical changes were made to the contents of the "URL Definition" section: Revised all of the ABNF to use common productions from [Models]. Replaced references to [RFC2396] with a reference to [RFC2396bis] (this allows literal IPv6 addresses to be used inside the portion of the URL, and a note was added to remind the reader of this enhancement). Referencing [RFC2396bis] required changes to the ABNF and text so that productions that are no longer defined by [RFC2396bis] are not used. For example, is not defined by [RFC2396bis] so it has been replaced with host [COLON port]. Note: [RFC2396bis] includes new definitions for the "Reserved" and "Unreserved" sets of characters, and the net result is that the following two additional characters should be percent-encoded when they appear anywhere in the data used to construct an LDAP URL: "[" and "]" (these two characters were first added to the Reserved set by RFC 2732). Changed the definition of to refer to from [Protocol]. This allows use of "*" in the part of the URL. It is believed that existing implementations of RFC 2255 already support this. Avoided use of (bracketed-string) productions in the , , , and rules. Smith & Howes Intended Category: Standards Track [Page 11] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 Changed the ABNF for to group the component with the preceding . Changed the rule to be an from [Models]. Changed the text about extension types so it references [LDAPIANA]. Reordered rules to more closely follow the order the elements appear in the URL. "Bindname Extension": removed due to lack of known implementations. 11.2. Editorial Changes Changed document title to include "LDAP:" prefix. IESG Note: removed note about lack of satisfactory mandatory authentication mechanisms. "Status of this Memo" section: updated boilerplate to match current I-D guidelines. "Abstract" section: separated from introductory material. "Table of Contents" and "IANA Considerations" sections: added. "Introduction" section: new section; separated from the Abstract. Changed the text indicate that RFC 2255 is replaced by this document (instead of RFC 1959). Added text to indicate that LDAP URLs are used for references and referrals. Fixed typo (replaced the nonsense phrase "to perform to retrieve" with "used to retrieve"). Added a note to let the reader know that not all of the parameters of the LDAP search operation described in [Protocol] can be expressed using this format. "URL Definition" section: removed second copy of grammar and following two paragraphs (editorial error in RFC 2255). Fixed line break within '!' sequence. Reformatted the ABNF to improve readability by aligning comments and adding some blank lines. Replaced "residing in the LDAP server" with "accessible from the LDAP server" in the sentence immediately following the ABNF. Removed the sentence "Individual attrdesc names are as defined for AttributeDescription in [Protocol]." because [Protocol]'s is now used directly in the ABNF. Reworded last paragraph to clarify which characters must be percent-encoded. Added text to indicate that LDAP URLs are used for references and referrals. Added text that refers to the ABNF from RFC 2234. Clarified and strengthened the requirements with respect to Smith & Howes Intended Category: Standards Track [Page 12] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 processing of URLs that contain implements and not implemented extensions (the approach now closely matches that specified in [Protocol] for LDAP controls). "Defaults for Fields of the LDAP URL" section: added; formed by moving text about defaults out of the "URL Definition" section. Replaced direct reference to the attribute name "*" with a reference to the special selector "*" defined in [Protocol]. "URL Processing" section: removed. "Examples" section: Modified examples to use example.com and example.net hostnames. Added missing '?' to the LDAP URL example whose filter contains three null bytes. Removed space after one comma within a DN. Revised the bindname example to use e-bindname. Changed the name of an attribute used in one example from "int" to "four-octet" to avoid potential confusion. Added an example that demonstrates the interaction between DN escaping and URL percent-encoding. Added some examples to show URL equivalence with respect to the portion of the URL. Used uppercase in some examples to remind the reader that some tokens are case-insensitive. "Security Considerations" section: Added a note about connection reuse. Added a note about using strong authentication methods for updates. Added a reference to [AuthMeth]. Added note that simply opening a connection may violate some users' privacy requirements. Adopted the working group's revised LDAP terminology specification by replacing the word "connection" with "LDAP session" or "LDAP connection" as appropriate. "Acknowledgements" section: added statement about this being an update to RFC 2255. Added Kurt Zeilenga, Jim Sermersheim, and Hallvard Furuseth. "Normative References" section: renamed from "References" per new RFC guidelines. Changed from [1] style to [Protocol] style throughout the document. Added references to RFC 2234 and RFC 3629. Updated all RFC 1738 references to point to the appropriate sections within [RFC2396bis]. Updated the LDAP references to refer to LDAPBis WG documents. Removed the reference to the LDAP Attribute Syntaxes document and added references to the [AuthMeth], [LDAPIANA], and [Roadmap] documents. "Informative References" section: added. Header and "Authors' Addresses" sections: added "editor" next to Mark Smith's name. Updated affiliation and contact information. Smith & Howes Intended Category: Standards Track [Page 13] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 Copyright: updated the year. Throughout the document: surrounded the names of all ABNF productions with "<" and ">" where they are used in descriptive text. 12. Appendix B: Changes Since Previous Document Revision This appendix lists all changes relative to the previously published revision, draft-ietf-ldapbis-url-08.txt. Note that when appropriate these changes are also included in Appendix A, but are also included here for the benefit of the people who have already reviewed draft-ietf-ldapbis-url-08.txt. This section will be removed before this document is published as an RFC. 12.1. Technical Changes Throughout the document: Replaced references to [RFC2396] and [RFC2732] with references to [RFC2396bis]. This required changes to the ABNF and text so that productions that are no longer defined by [RFC2396bis] are not used. For example, is not defined by [RFC2396bis] so it has been replaced with host [COLON port]. Note: [RFC2396bis] includes new definitions for the "Reserved" and "Unreserved" sets of characters, and the net result is that the following two additional characters should be percent-encoded when they appear anywhere in the data used to construct an LDAP URL: "[" and "]" (these two characters were first added to the Reserved set by RFC 2732). 12.2. Editorial Changes Throughout the document: Replaced phrases like "Escaping using the % method" with "Percent-encoding" to be consistent with the terminology used in [RFC2396bis]. "URL Definition" section: For consistency, replaced all occurrences of the phrase 'see the "Percent-Encoding" section below' with 'subject to the provisions of the "Percent-Encoding" section below.' Updated the copyright year to 2005. Intellectual Property Rights The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in Smith & Howes Intended Category: Standards Track [Page 14] INTERNET-DRAFT LDAP: Uniform Resource Locator 4 January 2005 this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf-ipr@ietf.org. Full Copyright Copyright (C) The Internet Society (2005). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This Internet Draft expires on 4 July 2005. Smith & Howes Intended Category: Standards Track [Page 15]