Network Working Group M. Smith, Editor Request for Comments: DRAFT Pearl Crescent, LLC Obsoletes: RFC 2254 T. Howes Expires: 13 August 2004 Opsware, Inc. 13 February 2004 LDAP: String Representation of Search Filters 1. Status of this Memo This document is an Internet-Draft and is subject to all provisions of Section 10 of RFC2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet- Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.html The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html Discussion of this document should take place on the LDAP (v3) Revision (ldapbis) Working Group mailing list . Copyright (C) The Internet Society (2004). All Rights Reserved. 2. Abstract LDAP search filters are transmitted in the LDAP protocol using a binary representation that is appropriate for use on the network. This document defines a human-readable string representation of LDAP search filters that is appropriate for use in LDAP URLs and in other applications. Smith & Howes Intended Category: Standards Track [Page 1] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 3. Table of Contents 1. Status of this Memo............................................1 2. Abstract.......................................................1 3. Table of Contents..............................................2 4. Introduction...................................................2 5. LDAP Search Filter Definition..................................2 6. String Search Filter Definition................................4 7. Examples.......................................................5 8. Security Considerations........................................7 9. Normative References...........................................7 10. Informative References.........................................8 11. Intellectual Property Rights...................................8 12. Acknowledgments................................................8 13. Authors' Addresses.............................................9 14. Full Copyright Statement.......................................9 15. Appendix A: Changes Since RFC 2254.............................10 15.1. Technical Changes...........................................10 15.2. Editorial Changes...........................................10 16. Appendix B: Changes Since Previous Document Revision...........11 16.1. Technical Changes...........................................12 16.2. Editorial Changes...........................................12 4. Introduction The Lightweight Directory Access Protocol (LDAP) [Protocol] defines a network representation of a search filter transmitted to an LDAP server. Some applications may find it useful to have a common way of representing these search filters in a human-readable form; LDAP URLs are an example of one such application. This document defines a human-readable string format for representing the full range of possible LDAP version 3 search filters, including extended match filters. This document is an integral part of the LDAP Technical Specification [Roadmap]. This document replaces RFC 2254. Changes to RFC 2254 are summarized in Appendix A. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119]. 5. LDAP Search Filter Definition An LDAPv3 search filter is defined in Section 4.5.1 of [Protocol] as follows: Smith & Howes Intended Category: Standards Track [Page 2] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 Filter ::= CHOICE { and [0] SET SIZE (1..MAX) OF filter Filter, or [1] SET SIZE (1..MAX) OF filter Filter, not [2] Filter, equalityMatch [3] AttributeValueAssertion, substrings [4] SubstringFilter, greaterOrEqual [5] AttributeValueAssertion, lessOrEqual [6] AttributeValueAssertion, present [7] AttributeDescription, approxMatch [8] AttributeValueAssertion, extensibleMatch [9] MatchingRuleAssertion } SubstringFilter ::= SEQUENCE { type AttributeDescription, -- initial and final can occur at most once substrings SEQUENCE SIZE (1..MAX) OF substring CHOICE { initial [0] AssertionValue, any [1] AssertionValue, final [2] AssertionValue } } AttributeValueAssertion ::= SEQUENCE { attributeDesc AttributeDescription, assertionValue AssertionValue } MatchingRuleAssertion ::= SEQUENCE { matchingRule [1] MatchingRuleId OPTIONAL, type [2] AttributeDescription OPTIONAL, matchValue [3] AssertionValue, dnAttributes [4] BOOLEAN DEFAULT FALSE } AttributeDescription ::= LDAPString -- Constrained to -- [Models] AttributeValue ::= OCTET STRING MatchingRuleId ::= LDAPString AssertionValue ::= OCTET STRING LDAPString ::= OCTET STRING -- UTF-8 encoded, -- [ISO10646] characters The AttributeDescription is a string representation of the attribute description and is defined in [Protocol]. The AttributeValue and AssertionValue OCTET STRING have the form defined in [Syntaxes]. The Filter is encoded for transmission over a network using the Basic Encoding Rules defined in [X.690], with simplifications described in Smith & Howes Intended Category: Standards Track [Page 3] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 [Protocol]. 6. String Search Filter Definition The string representation of an LDAP search filter is a string of UTF-8[RFC3629] encoded ISO 10646-1 characters that is defined by the following grammar, following the ABNF notation defined in [RFC2234]. The productions used that are not defined here are defined in section 1.4 (Common ABNF Productions) of [Models] unless otherwise noted. The filter format uses a prefix notation. filter = LPAREN filtercomp RPAREN filtercomp = and / or / not / item and = AMPERSAND filterlist or = VERTBAR filterlist not = EXCLAMATION filter filterlist = 1*filter item = simple / present / substring / extensible simple = attr filtertype assertionvalue filtertype = equal / approx / greater / less equal = EQUALS approx = TILDE EQUALS greater = RANGLE EQUALS less = LANGLE EQUALS extensible = attr [dnattrs] [matchingrule] COLON EQUALS assertionvalue / [dnattrs] matchingrule COLON EQUALS assertionvalue / COLON EQUALS assertionvalue present = attr EQUALS ASTERISK substring = attr EQUALS [initial] any [final] initial = assertionvalue any = ASTERISK *(assertionvalue ASTERISK) final = assertionvalue attr = attributedescription ; The attributedescription rule is defined in ; Section 2.5 of [Models]. dnattrs = COLON "dn" matchingrule = COLON oid assertionvalue = valueencoding ; The rule is used to encode an ; from Section 4.1.6 of [Protocol]. valueencoding = 0*(normal / escaped) normal = UTF1SUBSET / UTFMB escaped = ESC HEX HEX UTF1SUBSET = %x01-27 / %x2B-5B / %x5D-7F ; UTF1SUBSET excludes 0x00 (NUL), LPAREN, ; RPAREN, ASTERISK, and ESC. EXCLAMATION = %x21 ; exclamation mark ("!") AMPERSAND = %x26 ; ampersand (or AND symbol) ("&") Smith & Howes Intended Category: Standards Track [Page 4] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 ASTERISK = %x2A ; asterisk ("*") COLON = %x3A ; colon (":") VERTBAR = %x7C ; vertical bar (or pipe) ("|") TILDE = %x7E ; tilde ("~") Note that although both the and productions in the grammar above can produce the "attr=*" construct, this construct is used only to denote a presence filter. The rule ensures that the entire filter string is a valid UTF-8 string and provides that the octets that represent the ASCII characters "*" (ASCII 0x2a), "(" (ASCII 0x28), ")" (ASCII 0x29), "\" (ASCII 0x5c), and NUL (ASCII 0x00) are represented as a backslash "\" (ASCII 0x5c) followed by the two hexadecimal digits representing the value of the encoded octet. This simple escaping mechanism eliminates filter-parsing ambiguities and allows any filter that can be represented in LDAP to be represented as a NUL-terminated string. Other octets that are part of the set may be escaped using this mechanism, for example, non-printing ASCII characters. For AssertionValues that contain UTF-8 character data, each octet of the character to be escaped is replaced by a backslash and two hex digits, which form a single octet in the code of the character. For example, the filter checking whether the "cn" attribute contained a value with the character "*" anywhere in it would be represented as "(cn=*\2a*)". As indicated by the valueencoding rule, implementations MUST escape all octets greater than 0x7F that are not part of a valid UTF-8 encoding sequence when they generate a string representation of a search filter. Implementations SHOULD accept as input strings that are not valid UTF-8 strings. This is necessary because RFC 2254 did not clearly define the term "string representation" (and in particular did not mention that the string representation of an LDAP search filter is a string of UTF-8 encoded ISO 10646-1 characters). 7. Examples This section gives a few examples of search filters written using this notation. (cn=Babs Jensen) (!(cn=Tim Howes)) (&(objectClass=Person)(|(sn=Jensen)(cn=Babs J*))) Smith & Howes Intended Category: Standards Track [Page 5] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 (o=univ*of*mich*) (seeAlso=) The following examples illustrate the use of extensible matching. (cn:1.2.3.4.5:=Fred Flintstone) (cn:=Betty Rubble) (sn:dn:2.4.6.8.10:=Barney Rubble) (o:dn:=Ace Industry) (:1.2.3:=Wilma Flintstone) (:dn:2.4.6.8.10:=Dino) The first example shows use of the matching rule "1.2.3.4.5". The second example demonstrates use of a MatchingRuleAssertion form without a matchingRule. The third example illustrates the use of the ":oid" notation to indicate that matching rule "2.4.6.8.10" should be used when making comparisons, and that the attributes of an entry's distinguished name should be considered part of the entry when evaluating the match (indicated by the use of ":dn"). The fourth example denotes an equality match, except that DN components should be considered part of the entry when doing the match. The fifth example is a filter that should be applied to any attribute supporting the matching rule given (since the attr has been omitted). The sixth and final example is also a filter that should be applied to any attribute supporting the matching rule given. Attributes supporting the matching rule contained in the DN should also be considered. The following examples illustrate the use of the escaping mechanism. (o=Parens R Us \28for all your parenthetical needs\29) (cn=*\2A*) (filename=C:\5cMyFile) (bin=\00\00\00\04) (sn=Lu\c4\8di\c4\87) (1.3.6.1.4.1.1466.0=\04\02\48\69) The first example shows the use of the escaping mechanism to represent parenthesis characters. The second shows how to represent a "*" in an assertion value, preventing it from being interpreted as a substring indicator. The third illustrates the escaping of the Smith & Howes Intended Category: Standards Track [Page 6] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 backslash character. The fourth example shows a filter searching for the four-byte value 0x00000004, illustrating the use of the escaping mechanism to represent arbitrary data, including NUL characters. The fifth example illustrates the use of the escaping mechanism to represent various non-ASCII UTF-8 characters. The sixth and final example demonstrates assertion of a BER encoded value. 8. Security Considerations This memo describes a string representation of LDAP search filters. While the representation itself has no known security implications, LDAP search filters do. They are interpreted by LDAP servers to select entries from which data is retrieved. LDAP servers should take care to protect the data they maintain from unauthorized access. Please refer to the Security Considerations sections of [Protocol] and [AuthMeth] for more information. 9. Normative References [AuthMeth] Harrison, R. (editor), "LDAP: Authentication Methods and Connection Level Security Mechanisms", draft-ietf-ldapbis- authmeth-xx.txt, a work in progress. [ISO10646] Universal Multiple-Octet Coded Character Set (UCS) - Architecture and Basic Multilingual Plane, ISO/IEC 10646-1, 1993. [Models] Zeilenga, K. (editor), "LDAP: Directory Information Models", draft-ietf-ldapbis-models-xx.txt, a work in progress. [Protocol] draft-ietf-ldapbis-protocol-xx.txt, a work in progress. [RFC2119] S. Bradner, "Key words for use in RFCs to Indicate Requirement Levels", BCP 14 (also RFC 2119), March 1997. [RFC2234] Crocker, D., Overell, P., "Augmented BNF for Syntax Specifications: ABNF", RFC 2234, November 1997. [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO 10646", RFC 3629, November 2003. Smith & Howes Intended Category: Standards Track [Page 7] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 [Roadmap] Zeilenga, K. (editor), "LDAP: Technical Specification Road Map", draft-ietf-ldapbis-roadmap-xx.txt, a work in progress. [Syntaxes] Dally, K. (editor), "LDAP: Syntaxes", draft-ietf-ldapbis- syntaxes-xx.txt, a work in progress. [X.690] Specification of ASN.1 encoding rules: Basic, Canonical, and Distinguished Encoding Rules, ITU-T Recommendation X.690, 1994. 10. Informative References None. 11. Intellectual Property Rights The IETF takes no position regarding the validity or scope of any intellectual property or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; neither does it represent that it has made any effort to identify any such rights. Information on the IETF's procedures with respect to rights in standards-track and standards-related documentation can be found in BCP-11. Copies of claims of rights made available for publication and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementors or users of this specification can be obtained from the IETF Secretariat. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights which may cover technology that may be required to practice this standard. Please address the information to the IETF Executive Director. 12. Acknowledgments This document replaces RFC 2254 by Tim Howes. Changes included in this revised specification are based upon discussions among the authors, discussions within the LDAP (v3) Revision Working Group (ldapbis), and discussions within other IETF Working Groups. The contributions of individuals in these working groups is gratefully acknowledged. Smith & Howes Intended Category: Standards Track [Page 8] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 13. Authors' Addresses Mark Smith, Editor Pearl Crescent, LLC 447 Marlpool Dr. Saline, MI 48176 USA +1 734 944-2856 mcs@pearlcrescent.com Tim Howes Opsware, Inc. 599 N. Mathilda Ave. Sunnyvale, CA 94085 USA +1 408 744-7509 howes@opsware.com 14. Full Copyright Statement Copyright (C) The Internet Society (2004). All Rights Reserved. This document and translations of it may be copied and furnished to others, and derivative works that comment on or otherwise explain it or assist in its implementation may be prepared, copied, published and distributed, in whole or in part, without restriction of any kind, provided that the above copyright notice and this paragraph are included on all such copies and derivative works. However, this document itself may not be modified in any way, such as by removing the copyright notice or references to the Internet Society or other Internet organizations, except as needed for the purpose of developing Internet standards in which case the procedures for copyrights defined in the Internet Standards process must be followed, or as required to translate it into languages other than English. The limited permissions granted above are perpetual and will not be revoked by the Internet Society or its successors or assigns. This document and the information contained herein is provided on an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Smith & Howes Intended Category: Standards Track [Page 9] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 15. Appendix A: Changes Since RFC 2254 15.1. Technical Changes The following technical changes were made to the contents of the "String Search Filter Definition" section: Added statement that the string representation is a string of UTF-8 encoded ISO 10646-1 characters. Revised all of the ABNF to use common productions from [Models]. Replaced the "value" rule with a new "assertionvalue" rule within the "simple", "extensible", and "substring" ("initial", "any", and "final") rules. This matches a change made in [Syntaxes]. Revised the "attr", "matchingrule", and "assertionvalue" ABNF to more precisely reference productions from the [Models] and [Protocol] documents. Introduced the "valueencoding" and associated "normal" and "escaped" rules to reduce the dependence on descriptive text. The "normal" production restricts filter strings to valid UTF-8 sequences. Added a third option to the "extensible" production to allow creation of a MatchingRuleAssertion that only has a matchValue. Added a statement about expected behavior in light of RFC 2254's lack of a clear definition of "string representation." 15.2. Editorial Changes Changed document title to include "LDAP:" prefix. IESG Note: removed note about lack of satisfactory mandatory authentication mechanisms. Header and "Authors' Addresses" sections: added Mark Smith as the document editor and updated affiliation and contact information. "Table of Contents" and "Intellectual Property Rights" sections: added. Copyright: updated per latest IETF guidelines. "Abstract" section: separated from introductory material. Smith & Howes Intended Category: Standards Track [Page 10] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 "Introduction" section: new section; separated from the Abstract. Updated second paragraph to indicate that RFC 2254 is replaced by this document (instead of RFC 1960). Added reference to the [Roadmap] document. "LDAP Search Filter Definition" section: made corrections to the LDAPv3 search filter ABNF so it matches that used in [Protocol]. Clarified the definition of 'value' (now 'assertionvalue') to take into account the fact that it is not precisely an AttributeAssertion from [Protocol] section 4.1.6 (special handling is required for some characters). Added a note that each octet of a character to be escaped is replaced by a backslash and two hex digits, which represent a single octet. "Examples" section: added four additional examples: (seeAlso=), (cn:=Betty Rubble), (:1.2.3:=Wilma Flintstone), and (1.3.6.1.4.1.1466.0=\04\02\48\69). Replaced one occurrence of "a value" with "an assertion value". Corrected the description of this example: (sn:dn:2.4.6.8.10:=Barney Rubble). "Security Considerations" section: added references to [Protocol] and [AuthMeth]. "Normative References" section: renamed from "References" per new RFC guidelines. Changed from [1] style to [Protocol] style throughout the document. Added entries for [ISO10646], [RFC2119], [AuthMeth], [Models], and [Roadmap] and updated the UTF-8 reference. Replaced RFC 822 reference with a reference to RFC 2234. "Informative References" section: added for clarity. "Acknowledgments" section: added. "Appendix A: Changes Since RFC 2254" section: added. "Appendix B: Changes Since Previous Document Revision" section: added. 16. Appendix B: Changes Since Previous Document Revision This appendix lists all changes relative to the previously published revision, draft-ietf-ldapbis-filter-05.txt. Note that when appropriate these changes are also included in Appendix A, but are also included here for the benefit of the people who have already reviewed draft-ietf-ldapbis-filter-05.txt. This section will be removed before this document is published as an RFC. Smith & Howes Intended Category: Standards Track [Page 11] INTERNET-DRAFT LDAP: String Repres. of Search Filters 13 February 2004 16.1. Technical Changes None. 16.2. Editorial Changes "LDAP Search Filter Definition" section: changed the LDAPv3 search filter ABNF so it matches that used in the latest revision of [Protocol] and removed the following redundant descriptive text: "where the LDAPString above is limited to the UTF-8 encoding [UTF-8] of the ISO 10646 character set [ISO10646]." "String Search Filter Definition" section: Corrected section reference to [Models] and replaced this sentence: "Implementations SHOULD accept as input a string that includes invalid UTF-8 octet sequences." with the following: "Implementations SHOULD accept as input strings that are not valid UTF-8 strings." "Examples" section: Corrected the description of this example: (sn:dn:2.4.6.8.10:=Barney Rubble). "Normative References" section: changed UTF-8 reference to point to RFC 3629, replaced [ASN.1] with [X.690] for consistency, and indented the reference descriptions to enhance readability. Authors' Addresses section: New contact information for Mark Smith. Updated the copyright year to 2004. This Internet Draft expires on 13 August 2004. Smith & Howes Intended Category: Standards Track [Page 12]