Internet-Draft JMAP Calendars October 2022
Jenkins & Douglass Expires 9 April 2023 [Page]
Workgroup:
JMAP
Internet-Draft:
draft-ietf-jmap-calendars-09
Published:
Intended Status:
Standards Track
Expires:
Authors:
N.M. Jenkins, Ed.
Fastmail
M. Douglass, Ed.
Spherical Cow Group

JMAP for Calendars

Abstract

This document specifies a data model for synchronizing calendar data with a server using JMAP.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on 9 April 2023.

Table of Contents

1. Introduction

JMAP ([RFC8620] – (U+2013) JSON Meta Application Protocol) is a generic protocol for synchronizing data, such as mail, calendars or contacts, between a client and a server. It is optimized for mobile and web environments, and aims to provide a consistent interface to different data types.

This specification defines a data model for synchronizing calendar data between a client and a server using JMAP. The data model is designed to allow a server to provide consistent access to the same data via CalDAV [RFC4791] as well as JMAP, however the functionality offered over the two protocols may differ. Unlike CalDAV, this specification does not define access to tasks or journal entries (VTODO or VJOURNAL iCalendar components in CalDAV).

1.1. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.

Type signatures, examples, and property descriptions in this document follow the conventions established in Section 1.1 of [RFC8620]. Data types defined in the core specification are also used in this document.

1.2. The LocalDate Data Type

Where LocalDate is given as a type, it means a string in the same format as Date (see [RFC8620], Section 1.4), but with the time-offset omitted from the end. For example, 2014-10-30T14:12:00. The interpretation in absolute time depends upon the time zone for the event, which may not be a fixed offset (for example when daylight saving time occurs).

1.3. The Duration Data Type

Where Duration is given as a type, it means a length of time represented by a subset of the ISO 8601 duration format, as defined in [RFC8984], Section 1.4.6.

1.4. Terminology

The same terminology is used in this document as in the core JMAP specification, see [RFC8620], Section 1.6.

The terms ParticipantIdentity, Calendar, CalendarEvent, CalendarEventNotification, and CalendarPreferences (with these specific capitalizations) are used to refer to the data types defined in this document and instances of those data types.

1.5. Data Model Overview

An Account (see [RFC8620], Section 1.6.2) with support for the calendar data model contains zero or more Calendar objects, which is a named collection of CalendarEvents. Calendars can also provide defaults, such as alerts and a color to apply to events in the calendar. Clients commonly let users toggle visibility of events belonging to a particular calendar on/off. Servers may allow an event to belong to multiple Calendars within an account.

A CalendarEvent is a representation of an event or recurring series of events in JSEvent [RFC8984] format. Simple clients may ask the server to expand recurrences for them within a specific time period, and optionally convert times into UTC so they do not have to handle time zone conversion. More full-featured clients will want to access the full event information and handle recurrence expansion and time zone conversion locally.

CalendarEventNotification objects keep track of the history of changes made to a calendar by other users, allowing calendar clients to notify the user of changes to their schedule.

The ParticipantIdentity data type represents the identities of the current user within an Account, which determines which events the user is a participant of and possibly their permissions related to that event.

The CalendarPreferences object is a singleton in the account that stores the user's default calendar and participant identity.

In servers with support for JMAP Sharing [RFC XXX], data may be shared with other users. Sharing permissions are managed per calendar. For example, an individual may have separate calendars for personal and work activities, with both contributing to their free-busy availability, but only the work calendar shared in its entirety with colleagues. Principals may also represent schedulable entities, such as a meeting room.

Users can normally subscribe to any calendar to which they have access. This indicates the user wants this calendar to appear in their regular list of calendars. The separate "isVisible" property stores whether the user would currently like to view the events in a subscribed calendar.

1.5.1. UIDs and CalendarEvent Ids

Each CalendarEvent has a uid property ([RFC8984], Section 4.1.2), which is a globally unique identifier that identifies the same event in different Accounts, or different instances of the same recurring event within an Account.

An Account MUST NOT contain more than one CalendarEvent with the same uid unless all of the CalendarEvent objects have distinct, non-null values for their recurrenceId property. (This situation occurs if the principal is added to one or more specific instances of a recurring event without being invited to the whole series.)

Each CalendarEvent also has an id, which is scoped to the JMAP Account and used for referencing it in JMAP methods. There is no necessary link between the uid property and the CalendarEvent's id. CalendarEvents with the same uid in different Accounts MAY have different ids.

1.6. Addition to the Capabilities Object

The capabilities object is returned as part of the JMAP Session object; see [RFC8620], Section 2. This document defines two additional capability URIs.

1.6.1. urn:ietf:params:jmap:calendars

This represents support for the Calendar, CalendarEvent, CalendarEventNotification, and ParticipantIdentity data types and associated API methods. The value of this property in the JMAP Session capabilities property is an empty object.

The value of this property in an account’ (U+2019)s accountCapabilities property is an object that MUST contain the following information on server capabilities and permissions for that account:

  • maxCalendarsPerEvent: UnsignedInt|null The maximum number of Calendars (see Section XXX) that can be can assigned to a single CalendarEvent object (see Section XXX). This MUST be an integer >= 1, or null for no limit (or rather, the limit is always the number of Calendars in the account).
  • minDateTime: LocalDate The earliest date-time the server is willing to accept for any date stored in a CalendarEvent.
  • maxDateTime: LocalDate The latest date-time the server is willing to accept for any date stored in a CalendarEvent.
  • maxExpandedQueryDuration: Duration The maximum duration the user may query over when asking the server to expand recurrences.
  • maxParticipantsPerEvent: UnsignedInt|null The maximum number of participants a single event may have, or null for no limit.
  • mayCreateCalendar: Boolean If true, the user may create a calendar in this account.

1.6.2. urn:ietf:params:jmap:calendars:preferences

This represents support for the CalendarPreferences data type and associated API methods. The value of this property in the JMAP Session capabilities property and the account’ (U+2019)s accountCapabilities property is an empty object.

Any account with this capability MUST also have the urn:ietf:params:jmap:calendars capability.

1.6.3. urn:ietf:params:jmap:principals:availability

Represents support for the Principal/getAvailability method. Any account with this capability MUST also have the urn:ietf:params:jmap:principals capability (see [RFC XXX]).

The value of this property in the JMAP Session capabilities property is an empty object.

The value of this property in an account’ (U+2019)s accountCapabilities property is an object that MUST contain the following information on server capabilities and permissions for that account:

  • maxAvailabilityDuration: The maximum duration over which the server is prepared to calculate availability in a single call (see Section XXX).

2. Principals and Sharing

For systems that also support JMAP Sharing [RFC XXX], the calendars capability is used to indicate that this principal may be used with calendaring. A new method is defined to allow users to query availability when scheduling events.

2.1. Principal Capability urn:ietf:params:jmap:calendars

A "urn:ietf:params:jmap:calendars" property is added to the Principal "capabilities" object, the value of which is an object with the following properties:

  • accountId: Id|null Id of Account with the urn:ietf:params:jmap:calendars capability that contains the calendar data for this principal, or null if none (e.g. the Principal is a group just used for permissions management), or the user does not have access to any data in the account (with the exception of free/busy, which is governed by the mayGetAvailability property). The corresponding Account object can be found in the principal's "accounts" property, as per [RFC XXX].
  • mayGetAvailability: Boolean May the user call the "Principal/getAvailability" method with this Principal?
  • mayShareWith: Boolean May the user add this principal as a calendar sharee (by adding them to the shareWith property of a calendar, see Section XXX)?
  • scheduleId: String If this principal may be added as a participant to an event, this is the scheduleId to use to represent it.
  • sendTo: String[String]|null If this principal may be added as a participant to an event, this is the Participant#sendTo property to add (see [RFC8984], Section 4.4.5) for scheduling messages to reach it.

2.2. Principal/getAvailability

This method calculates the availability of the principal for scheduling within a requested time period. It takes the following arguments:

  • accountId: Id The id of the account to use.
  • id: Id The id of the Principal to calculate availability for.
  • utcStart: UTCDate The start time (inclusive) of the period for which to return availability.
  • utcEnd: UTCDate The end time (exclusive) of the period for which to return availability.
  • showDetails: Boolean If true, event details will be returned if the user has permission to view them.
  • eventProperties: String[]|null A list of properties to include in any JSEvent object returned. If null, all properties of the event will be returned. Otherwise, only properties with names in the given list will be returned.

The server will first find all relevant events, expanding any recurring events. Relevant events are ones where all of the following is true:

  • The principal is subscribed to the calendar.
  • The "includeInAvailability" property of the calendar for the principal is "all" or "attending".
  • The user has the "mayReadFreeBusy" permission for the calendar.
  • The event finishes after the "utcStart" argument and starts before the "utcEnd" argument.
  • The event's "privacy" property is not "secret".
  • The "freeBusyStatus" property of the event is "busy" (or omitted, as this is the default).
  • The "status" property of the event is not "cancelled".
  • If the "includeInAvailability" property of the calendar is "attending", then the principal is a participant of the event, and has a "participationStatus" of "accepted" or "tentative".

If an event is in more than one calendar, it is relevant if all of the above are true for any one calendar that it is in.

The server then generates a BusyPeriod object for each of these events. A BusyPeriod object has the following properties:

  • utcStart: UTCDate The start time (inclusive) of the period this represents.
  • utcEnd: UTCDate The end time (exclusive) of the period this represents.
  • busyStatus: String (optional, default "unavailable") This MUST be one of

    • confirmed: The event status is "confirmed".
    • tentative: The event status is "tentative".
    • unavailable: The principal is not available for scheduling at this time for any other reason.
  • event: JSEvent|null The JSEvent representation of the event, or null if any of the following are true:

    • The "showDetails" argument is false.
    • The "privacy" property of the event is "private".
    • The user does not have the "mayReadItems" permission for any of the calendars the event is in.

    If an eventProperties argument was given, any properties in the JSEvent that are not in the eventProperties list are removed from the returned representation.

The server MAY also generate BusyPeriod objects based on other information it has about the principal's availability, such as office hours.

Finally, the server MUST merge and split BusyPeriod objects where the "event" property is null, such that none of them overlap and either there is a gap in time between any two objects (the utcEnd of one does not equal the utcStart of another) or those objects have a different busyStatus property. If there are overlapping BusyPeriod time ranges with different "busyStatus" properties the server MUST choose the value in the following order: confirmed > unavailable > tentative.

The response has the following argument:

  • list: BusyPeriod[] The list of BusyPeriod objects calculated as described above.

The following additional errors may be returned instead of the "Principal/getAvailability" response:

notFound: No principal with this id exists, or the user does not have permission to see that this principal exists.

forbidden: The user does not have permission to query this principal's availability.

tooLarge: The duration between utcStart and utcEnd is longer than the server is willing to calculate availability for.

rateLimit: Too many availability requests have been made recently and the user is being rate limited. It may work to try again later.

3. Participant Identities

A ParticipantIdentity stores information about a URI that represents the user within that account in an event's participants. It has the following properties:

A participant in an event corresponds to a ParticipantIdentity if the scheduleId property of the participant is equivalent to the scheduleId property of the identity after syntax-based normalisation, as per [RFC3986], Section 6.2.2.

The following JMAP methods are supported.

3.1. ParticipantIdentity/get

This is a standard "/get" method as described in [RFC8620], Section 5.1. The ids argument may be null to fetch all at once.

3.2. ParticipantIdentity/changes

This is a standard "/changes" method as described in [RFC8620], Section 5.2.

3.3. ParticipantIdentity/set

This is a standard "/set" method as described in [RFC8620], Section 5.3. The server MAY restrict the uri values the user may claim, for example only allowing mailto: URIs with email addresses that belong to the user. A standard forbidden error is returned to reject non-permissible changes.

A participant identity may be destroyed that is referenced as the "defaultParticipantIdentityId" in the CalenderPreferences object for the same account. Doing so updates the defaultParticipantIdentityId property on the CalendarPreferences to null.

4. Calendars

A Calendar is a named collection of events. All events are associated with at least one calendar.

A Calendar object has the following properties:

If not null, the value MUST be a case-insensitive color name taken from the set of names defined in Section 4.3 of CSS Color Module Level 3 COLORS, or an RGB value in hexadecimal notation, as defined in Section 4.2.1 of CSS Color Module Level 3.

The color SHOULD have sufficient contrast to be used as text on a white background.

A CalendarRights object has the following properties:

The user is an owner for an event if the CalendarEvent object has a "participants" property, and one of the Participant objects both:

a) Has the "owner" role.
b) Corresponds to one of the user's ParticipantIdentity objects in the account (as per Section XXX).

An event has no owner if its participants property is null or omitted, or if none of the Participant objects have the "owner" role.

4.1. Calendar/get

This is a standard "/get" method as described in [RFC8620], Section 5.1. The ids argument may be null to fetch all at once.

If mayReadFreeBusy is the only permission the user has, the calendar MUST NOT be returned in Calendar/get and Calendar/query; it must behave as though it did not exist. The data is just used as part of Principal/getAvailability.

4.2. Calendar/changes

This is a standard "/changes" method as described in [RFC8620], Section 5.2.

4.3. Calendar/set

This is a standard "/set" method as described in [RFC8620], Section 5.3 but with the following additional request argument:

  • onDestroyRemoveEvents: Boolean (default: false)

If false, any attempt to destroy a Calendar that still has CalendarEvents in it will be rejected with a calendarHasEvent SetError. If true, any CalendarEvents that were in the Calendar will be removed from it, and if in no other Calendars they will be destroyed. This SHOULD NOT send scheduling messages to participants or create CalendarEventNotification objects.

The "shareWith" property may only be set by users that have the mayAdmin right. When modifying the shareWith property, the user cannot give a right to a principal if the principal did not already have that right and the user making the change also does not have that right. Any attempt to do so must be rejected with a forbidden SetError.

Users can subscribe or unsubscribe to a calendar by setting the "isSubscribed" property. The server MAY forbid users from subscribing to certain calendars even though they have permission to see them, rejecting the update with a forbidden SetError.

The following properties may be set by anyone who is subscribed to the calendar and are always stored per-user:

  • name
  • color
  • sortOrder
  • isVisible
  • timeZone
  • includeInAvailability
  • defaultAlertsWithoutTime
  • defaultAlertsWithTime

The "name", "color", and "timeZone" properties are initially inherited from the owner's copy of the calendar, but if set by a sharee then they get their own copy of the property; it does not change for any other principals. If the value of the property in the owner's calendar changes after this, it does not overwrite the sharee's value.

The "sortOrder", "isVisible", "includeInAvailability", "defaultAlertsWithTime", and "defaultAlertsWithoutTime" properties are initally the default value for each sharee; they are not inherited from the owner.

A calendar may be destroyed that is referenced as the "defaultCalendarId" in the CalenderPreferences object for the same account. If this occurs, the server MUST set the defaultCalendarId property on the CalendarPreferences to another calendar where the principal has the mayWriteAll right, if any, otherwise null.

The following extra SetError types are defined:

For "destroy":

  • calendarHasEvent: The Calendar has at least one CalendarEvent assigned to it, and the "onDestroyRemoveEvents" argument was false.

5. Calendar Events

A CalendarEvent object contains information about an event, or recurring series of events, that takes place at a particular time. It is a JSEvent object, as defined in [RFC8984], with the following additional properties:

CalendarEvent objects MUST NOT have a "method" property as this is only used when representing iTIP [RFC5546] scheduling messages, not events in a data store.

5.1. Additional JSCalendar properties

This document defines three new JSCalendar properties.

5.1.1. mayInviteSelf

Type: Boolean (default: false)

If true, any user may add themselves to the event as a participant with the "attendee" role. This property MUST NOT be altered in the recurrenceOverrides; it may only be set on the base object.

This indicates the event will accept "party crasher" RSVPs via iTIP, subject to any other domain-specific restrictions, and users may add themselves to the event via JMAP as long as they have the mayRSVP permission for the calendar.

5.1.2. mayInviteOthers

Type: Boolean (default: false)

If true, any current participant with the "attendee" role may add new participants with the "attendee" role to the event. This property MUST NOT be altered in the recurrenceOverrides; it may only be set on the base object.

The mayRSVP permission for the calendar is also required in conjunction with this event property for users to be allowed to make this change via JMAP.

5.1.3. hideAttendees

Type: Boolean (default: false)

If true, only the owners of the event may see the full set of participants. Other sharees of the event may only see the owners and themselves. This property MUST NOT be altered in the recurrenceOverrides; it may only be set on the base object.

5.2. Attachments

The Link object, as defined in [RFC8984] Section 4.2.7, with a "rel" property equal to "enclosure" is used to represent attachments. Instead of mandating an "href" property, clients may set a "blobId" property instead to reference a blob of binary data in the account, as per [RFC8620] Section 6.

The server MUST translate this to an embedded data: URL [RFC2397] when sending the event to a system that cannot access the blob. Servers that support CalDAV access to the same data are recommended to expose these files as managed attachments [?@RFC8607].

5.3. Per-user properties

In shared calendars, any top-level property registered in the IANA registry as "Is Per-User: yes" (see Section XXX) MUST be stored per-user. This includes:

  • keywords
  • color
  • freeBusyStatus
  • useDefaultAlerts
  • alerts

The user may also modify these properties on a per-occurrence basis for recurring events; again, these MUST be stored per-user. Sharees initially receive the default value for each of these properties, not whatever value another user may have set.

When writing only per-user properties, the "updated" property MUST also be stored just for that user if set. When fetching the "updated" property, the value to return is whichever is later of the per-user updated time or the updated time of the base event.

5.4. Recurring events

Events may recur, in which case they represent multiple occurrences or instances. The data store will either contain a single base event, containing a recurrence rule and/or recurrence overrides; or, a set of individual instances (when invited to specific occurrences only).

The client may ask the server to expand recurrences within a specific time range in "CalendarEvent/query". This will generate synthetic ids representing individual instances in the requested time range. The client can fetch and update the objects using these ids and the server will make the appropriate changes to the base event. Synthetic ids do not appear in "CalendarEvent/changes" responses; only the ids of events as actually stored on the server.

If the user is invited to specific instances then later added to the base event, "CalendarEvent/changes" will show the ids of all the individual instances being destroyed and the id for the base event being created.

5.5. Updating for "this-and-future"

When editing a recurring event, you can either update the base event (affecting all instances unless overriden) or update an override for a specific occurrence. To update all occurrences from a specific point onwards, there are therefore two options: split the event, or update the base event and override all occurrences before the split point back to their original values.

5.5.1. Splitting an event

If the event is not scheduled (has no participants), the simplest thing to do is to duplicate the event, modifying the recurrence rules of the original so it finishes before the split point, and the duplicate so it starts at the split point. As per JSCalendar [RFC8984] Section 4.1.3, a "next" and "first" relation MUST be set on the new objects respectively.

Splitting an event however is problematic in the case of a scheduled event, because the iTIP messages generated make it appear like two unrelated changes, which can be confusing.

5.5.2. Updating the base event and overriding previous

For scheduled events, a better approach is to avoid splitting and instead update the base event with the new property value for "this and future", then create overrides for all occurrences before the split point to restore the property to its previous value. Indeed, this may be the only option the user has permission to do if not an owner of the event.

Clients may choose to skip creating the overrides if the old data is not important, for example if the "alerts" property is being updated, it is probably not important to create overrides for events in the past with the alerts that have already fired.

5.6. CalendarEvent/get

This is a standard "/get" method as described in [RFC8620], Section 5.1, with three extra arguments:

  • recurrenceOverridesBefore: UTCDate|null If given, only recurrence overrides with a recurrence id before this date (when translated into UTC) will be returned.
  • recurrenceOverridesAfter: UTCDate|null If given, only recurrence overrides with a recurrence id on or after this date (when translated into UTC) will be returned.
  • reduceParticipants: Boolean (default: false) If true, only participants with the "owner" role or corresponding to the user's participant identities will be returned in the "participants" property of the base event and any recurrence overrides. If false, all participants will be returned.
  • timeZone: String (default "Etc/UTC") The time zone to use when calculating the utcStart/utcEnd property of floating events. This argument has no effect if those properties are not requested.

A CalendarEvent object is a JSEvent object so may have arbitrary properties. If the client makes a "CalendarEvent/get" call with a null or omitted "properties" argument, all properties defined on the JSEvent object in the store are returned, along with the "id", "calendarIds", "isDraft", and "isOrigin" properties. The "utcStart" and "utcEnd" computed properties are only returned if explicitly requested. If either are requested, the "recurrenceOverrides" property MUST NOT be requested (recurrence overrides cannot be interpreted accurately with just the UTC times).

If specific properties are requested from the JSEvent and the property is not present on the object in the server's store, the server SHOULD return the default value if known for that property.

A requested id may represent a server-expanded single instance of a recurring event if the client asked the server to expand recurrences in "CalendarEvent/query". In such a case, the server will resolve any overrides and set the appropriate "start" and "recurrenceId" properties on the CalendarEvent object returned to the client. The "recurrenceRule" and "recurrenceOverrides" properties MUST be returned as null if requested for such an event.

An event with the same uid/recurrenceId may appear in different accounts. Clients may coalesce the view of such events, but must be aware that the data may be different in the different accounts due to per-user properties, difference in permissions, etc.

The "hideAttendees" property of a JSEvent object allows the event owner(s) to reduce the visibility of sharees into the set of participants. If this is true, when a non-owner sharee fetches the event, the server MUST only return participants with the "owner" role or corresponding to the user's participant identities.

The "privacy" property of a JSEvent object allows the principal that owns the calendar to override how sharees of the calendar see the event. If set to "private", then when a sharee fetches the event the server MUST only return properties that are:

  • the basic time and metadata properties of the JSEvent object as specified in [RFC8984], Section 4.4.3; or
  • properties that are wholly derived from these permitted properties (i.e., utcStart, utcEnd); or
  • Additional CalendarEvent properties not derived from the JSEvent data (i.e., id, baseEventId, calendarIds, isDraft, isOrigin).

If "privacy" is set to "secret", the server MUST behave as though the event does not exist for all users other than the principal that owns the calendar.

5.7. CalendarEvent/changes

This is a standard "/changes" method as described in [RFC8620], Section 5.2.

Synthetic ids generated by the server expanding recurrences in "CalendarEvent/query" do not appear in "CalendarEvent/changes" responses; only the ids of events as actually stored on the server.

5.8. CalendarEvent/set

This is a standard "/set" method as described in [RFC8620], Section 5.3, with the following extra argument:

  • sendSchedulingMessages: Boolean (default: false) If true then any changes to scheduled events will be sent to all the participants (if the server is the origin of the event) or back to the origin (otherwise). If false, the changes only affect this account and no scheduling messages will be sent.

An id may represent a server-expanded single instance of a recurring event if the client asked the server to expand recurrences in "CalendarEvent/query". When the synthetic id for such an instance is given, the server MUST process an update as an update to the recurrence override for that instance on the base event, and a destroy as removing just that instance.

Clients MUST NOT send an update/destroy to both the base event and a synthetic instance in a single "/set" request; the result of this is undefined. Note however, a client may replace a series of explicit instances (each with the same uid but a different recurrenceId property) with the base event (same uid, no recurrenceId) in a single "/set" call. (So the /set will destroy the existing instances and create the new base event.) This will happen when someone is initially invited to a specific instance or instances of a recurring event, then later invited to the whole series.

Servers MUST enforce the user's permissions as returned in the "myRights" property of the Calendar objects and reject changes with a forbidden SetError if not allowed.

The "privacy" property of a JSEvent object allows the principal to override how sharees of the calendar see the event. If this is set to "private", a sharee may not delete or update the event (even if only modifying per-user properties); any attempt to modify such an event MUST be rejected with a forbidden SetError. If set to "secret", the server MUST behave as though the event does not exist for all users other than the principal that owns the calendar.

The "privacy" property MUST NOT be set to anything other than "public" (the default) for events in a calendar that does not belong to the user (e.g. a shared team calendar, or a calendar shared by another user). The server MUST reject this with an invalidProperties SetError.

If omitted on create, the server MUST set the following properties to an appropriate value:

If (and only if) the server is the origin of the event (i.e., the event's "isOrigin" property is true), the "updated" property MUST be set to the current time by the server whenever an event is created or updated. If the client tries to set a value for this property it is not an error, but it MUST be overridden and replaced with the server's time. If the event is being created and the overridden "updated" time is now earlier than a client-supplied "created" time, the "created" time MUST also be overridden to the server's time. If the server is not the origin of the event it MUST NOT automatically set an "updated" time, as this can break correct processing of iTIP messages.

Clients SHOULD NOT allow users to manually edit anything other than per-user properties when the "isOrigin" property is false, even if the calendar "myRights" allows them to do so. All other properties may be overwritten when a future update arrives to this event from the origin (i.e., via another iTIP REQUEST). Such updates may be directly applied by the server, or applied at the user's request by a client if it has access to the data through some other means (e.g., the client also has access to the user's email and can parse an iMIP message).

When updating an event, if all of:

  • a property has been changed other than "calendarIds", "isDraft", "updated" or a per-user property (see Section XXX); and
  • the server is the origin of the event (the "isOrigin" property is true); and
  • the "sequence" property is not explicitly set in the update, or the given value is less than or equal to the current "sequence" value on the server;

then the server MUST increment the "sequence" value by one.

The "method" property MUST NOT be set. Any attempt to do these is rejected with a standard invalidProperties SetError.

If "utcStart" is set, this is translated into a "start" property using the server's current time zone information. It MUST NOT be set in addition to a "start" property and it cannot be set inside "recurrenceOverrides"; this MUST be rejected with an invalidProperties SetError.

Similarly, the "utcEnd" property is translated into a "duration" property if set. It MUST NOT be set in addition to a "duration" property and it cannot be set inside "recurrenceOverrides"; this MUST be rejected with an invalidProperties SetError.

The server does not automatically reset the "partipationStatus" or "expectReply" properties of a Participant when changing other event details. Clients should either be intelligent about whether the change invalidates previous RSVPs, or ask the user whether to reset them.

The server MAY enforce that all events have an owner, for example in team calendars. If the user tries to create an event without participants in such a calendar, the server MUST automatically add a participant with the "owner" role corresponding to one of the user's ParticipantIdentities (see Section XXX).

When creating an event with participants, or adding participants to an event that previously did not have participants, the server MUST set the "replyTo" property of the event if not present. Clients SHOULD NOT set the "replyTo" property for events when the user adds participants; the server is better positioned to add all the methods it supports to receive replies.

5.8.1. Patching

The JMAP "/set" method allows you to update an object by sending a patch, rather than having to supply the whole object. When doing so, care must be taken if updating a property of a CalendarEvent where the value is itself a PatchObject, e.g. inside "localizations" or "recurrenceOverrides". In particular, you cannot add a property with value null to the CalendarEvent using a direct patch on that property, as this is interpreted instead as a patch to remove the property.

This is more easily understood with an example. Suppose you have a CalendarEvent object like so:

{
  "id": "123",
  "title": "FooBar team meeting",
  "start": "2018-01-08T09:00:00",
  "recurrenceRules": [{
   "@type": "RecurrenceRule",
   "frequency": "weekly"
  }],
  "replyTo": {
   "imip": "mailto:6489-4f14-a57f-c1@schedule.example.com"
  },
  "participants": {
   "dG9tQGZvb2Jhci5xlLmNvbQ": {
     "@type": "Participant",
     "name": "Tom",
     "email": "tom@foobar.example.com",
     "scheduleId": "mailto:6489-4f14-a57f-c1@calendar.example.com",
     "sendTo": {
       "imip": "mailto:6489-4f14-a57f-c1@calendar.example.com"
     },
     "participationStatus": "accepted",
     "roles": {
       "attendee": true
     }
   },
   "em9lQGZvb2GFtcGxlLmNvbQ": {
     "@type": "Participant",
     "name": "Zoe",
     "email": "zoe@foobar.example.com",
     "scheduleId": "mailto:zoe@foobar.example.com"
     "sendTo": {
       "imip": "mailto:zoe@foobar.example.com",
       "other": "https://foobar.example.com/zoe/itip"
     },
     "participationStatus": "accepted",
     "roles": {
       "owner": true,
       "attendee": true,
       "chair": true
     }
   },
   "recurrenceOverrides": {
     "2018-03-08T09:00:00": {
       "start": "2018-03-08T10:00:00",
       "participants/dG9tQGZvb2Jhci5xlLmNvbQ/participationStatus":
                                                           "declined"
     }
   }
  }
}

In this example, Tom is normally going to the weekly meeting but has declined the occurrence on 2018-03-08, which starts an hour later than normal. Now, if Zoe too were to decline that meeting, she could update the event by just sending a patch like so:

[[ "CalendarEvent/set", {
  "accountId": "ue150411c",
  "update": {
    "123": {
      "recurrenceOverrides/2018-03-08T09:00:00/
          participants~1em9lQGZvb2GFtcGxlLmNvbQ~1participationStatus":
              "declined"
    }
  }
}, "0" ]]

This patches the "2018-03-08T09:00:00" PatchObject in recurrenceOverrides so that it ends up like this:

"recurrenceOverrides": {
  "2018-03-08T09:00:00": {
    "start": "2018-03-08T10:00:00",
    "participants/dG9tQGZvb2Jhci5xlLmNvbQ/participationStatus":
                                                       "declined",
    "participants/em9lQGZvb2GFtcGxlLmNvbQ/participationStatus":
                                                       "declined"
  }
}

Now if Tom were to change his mind and remove his declined status override (thus meaning he is attending, as inherited from the top-level event), he might remove his patch from the overrides like so:

[[ "CalendarEvent/set", {
  "accountId": "ue150411c",
  "update": {
    "123": {
      "recurrenceOverrides/2018-03-08T09:00:00/
          participants~1dG9tQGZvb2Jhci5xlLmNvbQ~1participationStatus": null
    }
  }
}, "0" ]]

However, if you instead want to remove Tom from this instance altogether, you could not send this patch:

[[ "CalendarEvent/set", {
  "accountId": "ue150411c",
  "update": {
    "123": {
      "recurrenceOverrides/2018-03-08T09:00:00/
          participants~1dG9tQGZvb2Jhci5xlLmNvbQ": null
    }
  }
}, "0" ]]

This would mean remove the "participants/dG9tQGZvb2Jhci5xlLmNvbQ" property at path "recurrenceOverrides" -> "2018-03-08T09:00:00" inside the object; but this doesn't exist. We actually we want to add this property and make it map to null. The client must instead send the full object that contains the property mapping to null, like so:

[[ "CalendarEvent/set", {
  "accountId": "ue150411c",
  "update": {
    "123": {
      "recurrenceOverrides/2018-03-08T09:00:00": {
        "start": "2018-03-08T10:00:00",
        "participants/em9lQGZvb2GFtcGxlLmNvbQ/participationStatus":
                                                       "declined"
        "participants/dG9tQGZvb2Jhci5xlLmNvbQ": null
      }
    }
  }
}, "0" ]]

5.8.2. Sending invitations and responses

If "sendSchedulingMessages" is true, the server MUST send appropriate iTIP [RFC5546] scheduling messages after successfuly creating, updating or destroying a calendar event.

When determining which scheduling messages to send, the server must first establish whether it is the origin of the event, as described in the "isOrigin" property.

Messages are only sent to participants with a "scheduleAgent" property set to "server" or omitted. If the effective "scheduleAgent" property is changed:

  • to "server" from something else: send messages to this participant as though the event had just been created.
  • from "server" to something else: send messages to this participant as though the event had just been destroyed.
  • any other change: do not send any messages to this participant.

The server may send the scheduling message via any of the methods defined on the sendTo property of a participant (if the server is the origin) or the replyTo property of the event (otherwise) that it supports. If no supported methods are available, the server MUST reject the change with a noSupportedScheduleMethods SetError.

If the server is the origin of the event it MUST NOT send messages to any participant where it will receive the message back in the same account (i.e. it must not send messages to the owner of the calendar the event is already on).

If sending via iMIP [RFC6047], the server MAY choose to only send updates it deems "essential" to avoid flooding the recipient's email with changes they do not care about. For example, changes to the participation status of another participant, or changes to events solely in the past may be omitted.

5.8.2.1. REQUEST

When the server is the origin for the event, a REQUEST message ([RFC5546], Section 3.2.2) is sent to all current participants (except those corresponding to the owner of the calendar) if either:

  • The event is being created; or
  • Any non per-user property (see Section XXX) is updated on the event (including adding/removing participants), except if just modifying the recurrenceOverrides such that CANCEL messages are generated (see the next section).

Note, if the only change is adding an additional instance (not generated by the event's recurrence rule) to the recurrenceOverrides, this MAY be handled via sending an ADD message ([RFC5546], Section 3.2.4) for the single instance rather than a REQUEST message for the base event. However, for interoperability reasons this is not recommended due to poor support in the wild for this type of message.

The server MUST ensure participants are only sent information about recurrence instances they are added to when sending scheduling messages for recurring events. If the participant is not invited to the full recurring event but only individual instances, scheduling messages MUST be sent for just those expanded occurrences individually. If a participant is invited to a recurring event, but removed via a recurrence override from a particular instance, any scheduling messages to this participant MUST return the instance as "excluded" (if it matches a recurrence rule for the event) or omit the instance entirely (otherwise).

If the event's "hideAttendees" property is set to true, the recipient MUST be the only attendee in the message; all others are omitted.

5.8.2.2. CANCEL

When the server is the origin for the event, a CANCEL message ([RFC5546], Section 3.2.5) is sent if any of:

  • A participant is removed from either the base event or a single instance (the message is only sent to this participant; remaining participants will get a REQUEST, as described above).
  • The event is destroyed.
  • An exclusion is added to recurrenceOverrides to remove an instance generated by the event's recurrence rule.
  • An additional instance (not generated by the event's recurrence rule) is removed from the recurrenceOverrides.

In each of the latter 3 cases, the message is sent to all participants (except those corresponding to the owner of the calendar).

5.8.2.3. REPLY

When the server is not the origin for the event, a REPLY message ([RFC5546], Section 3.2.3) is sent for every participant corresponding to one of the user's ParticipantIdentitities in the account if any of the following changes are made:

  • The "participationStatus" property of the participant is changed, either for the base event or a specific instance, to any value other than "needs-action".
  • The event is created and the participationStatus is not "needs-action".
  • The event is destroyed and the participationStatus was not "needs-action".

If the participationStatus property is changed for just a single instance of the event (i.e., set in recurrenceOverrides), the REPLY message SHOULD be sent for just that recurrence id.

5.9. CalendarEvent/copy

This is a standard "/copy" method as described in [RFC8620], Section 5.4.

5.10. CalendarEvent/query

This is a standard "/query" method as described in [RFC8620], Section 5.5, with two extra arguments:

  • expandRecurrences: Boolean (default: false) If true, the server will expand any recurring event. If true, the filter MUST be just a FilterCondition (not a FilterOperator) and MUST include both a before and after property. This ensures the server is not asked to return an infinite number of results.
  • timeZone: String The time zone for before/after filter conditions (default: "Etc/UTC")

If expandRecurrences is true, a separate id will be returned for each instance of a recurring event that matches the query. This synthetic id is opaque to the client, but allows the server to resolve the id + recurrence id for "/get" and "/set" operations. Otherwise, a single id will be returned for matching recurring events that represents the entire event.

There is no necessary correspondence between the ids of different instances of the same expanded event.

The following additional error may be returned instead of the "CalendarEvent/query" response:

cannotCalculateOccurrences: the server cannot expand a recurrence required to return the results for this query.

5.10.1. Filtering

A FilterCondition object has the following properties:

  • inCalendars: Id[]|null A list of calendar ids. An event must be in ANY of these calendars to match the condition.
  • after: LocalDate|null The end of the event, or any recurrence of the event, in the time zone given as the timeZone argument, must be after this date to match the condition.
  • before: LocalDate|null The start of the event, or any recurrence of the event, in the time zone given as the timeZone argument, must be before this date to match the condition.
  • text: String|null Looks for the text in the title, description, locations (matching name/description), participants (matching name/email) and any other textual properties of the event or any recurrence of the event.
  • title: String|null Looks for the text in the title property of the event, or the overridden title property of a recurrence.
  • description: String|null Looks for the text in the description property of the event, or the overridden description property of a recurrence.
  • location: String|null Looks for the text in the locations property of the event (matching name/description of a location), or the overridden locations property of a recurrence.
  • owner: String|null Looks for the text in the name or email fields of a participant in the participants property of the event, or the overridden participants property of a recurrence, where the participant has a role of "owner".
  • attendee: String|null Looks for the text in the name or email fields of a participant in the participants property of the event, or the overridden participants property of a recurrence, where the participant has a role of "attendee".
  • participationStatus: Must match. If owner/attendee condition, status must be of that participant. Otherwise any.
  • uid: String The uid of the event is exactly the given string.

If expandRecurrences is true, all conditions must match against the same instance of a recurring event for the instance to match. If expandRecurrences is false, all conditions must match, but they may each match any instance of the event.

If zero properties are specified on the FilterCondition, the condition MUST always evaluate to true. If multiple properties are specified, ALL must apply for the condition to be true (it is equivalent to splitting the object into one-property conditions and making them all the child of an AND filter operator).

The exact semantics for matching String fields is deliberately not defined to allow for flexibility in indexing implementation, subject to the following:

  • Text SHOULD be matched in a case-insensitive manner.
  • Text contained in either (but matched) single or double quotes SHOULD be treated as a phrase search, that is a match is required for that exact sequence of words, excluding the surrounding quotation marks. Use \", \' and \\ to match a literal ", ' and \ respectively in a phrase.
  • Outside of a phrase, white-space SHOULD be treated as dividing separate tokens that may be searched for separately in the event, but MUST all be present for the event to match the filter.
  • Tokens MAY be matched on a whole-word basis using stemming (so for example a text search for bus would match "buses" but not "business").

5.10.2. Sorting

The following properties MUST be supported for sorting:

  • start
  • uid
  • recurrenceId

The following properties SHOULD be supported for sorting:

  • created
  • updated

5.11. CalendarEvent/queryChanges

This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6.

6. Alerts

Alerts may be specified on events as described in [RFC8984], Section 4.5.

Alerts MUST only be triggered for events in calendars where the user is subscribed.

When an alert with an "email" action is triggered, the server MUST send an email to the user to notify them of the event. The contents of the email is implementation specific. Clients MUST NOT perform an action for these alerts.

When an alert with a "display" action is triggered, clients SHOULD display an alert in a platform-appropriate manner to the user to remind them of the event. Clients with a full offline cache of events may choose to calculate when alerts should trigger locally. Alternatively, they can subscribe to push events from the server.

6.1. Default alerts

If the "useDefaultAlerts" property of an event is true, the alerts are taken from the "defaultAlertsWithTime" or "defaultAlertsWithoutTime" property of all Calendars the event is in, as described in Section XXX, rather than the "alerts" property of the CalendarEvent.

When using default alerts, the "alerts" property of the event is ignored except for the following:

  • The "acknowledged" time for an alert is stored here when a default alert for the event is dismissed. The id of the alert MUST be the same as the id of the default alert in the calendar. See Section XXX on acknowledging alerts.
  • If an alert has a relatedTo property where the parent is the id of one of the calendar default alerts, it is processed as normal and not ignored. This is to support snoozing default alerts; see Section XXX.

6.2. Acknowledging an alert

To dismiss an alert, clients set the "acknowledged" property of the Alert object to the current date-time. If the alert was a calendar default, it may need to be added to the event at this point in order to acknowledge it. When other clients fetch the updated CalendarEvent they SHOULD automatically dismiss or suppress duplicate alerts (alerts with the same alert id that triggered on or before the "acknowledged" date-time) and alerts that have been removed from the event.

Setting the "acknowledged" property MUST NOT create a new recurrence override. For a recurring calendar object, the "acknowledged" property of the parent object MUST be updated, unless the alert is already overridden in the "recurrenceOverrides" property.

6.3. Snoozing an alert

Users may wish to dismiss an alert temporarily and have it come back after a specific period of time. To do this, clients MUST:

  1. Acknowledge the alert as described in Section XXX.
  2. Add a new alert to the event with an AbsoluteTrigger for the date-time the alert has been snoozed until. Add a "relatedTo" property to the new alert, setting the "parent" relation to point to the original alert. This MUST NOT create a new recurrence override; it is added to the same "alerts" property that contains the alert that was acknowledged in step 1.

When acknowledging a snoozed alert (i.e. one with a parent relatedTo pointing to the original alert), the client SHOULD delete the alert rather than setting the "acknowledged" property.

6.4. Push events

Servers that support the urn:ietf:params:jmap:calendars capability MUST support registering for the pseudo-type "CalendarAlert" in push subscriptions and event source connections, as described in [RFC8620], Sections 7.2 and 7.3.

If requested, a CalendarAlert notification will be pushed whenever an alert is triggered for the user. For Event Source connections, this notification is pushed as an event called "calendarAlert".

A CalendarAlert object has the following properties:

  • @type: String This MUST be the string "CalendarAlert".
  • accountId: Id The account id for the calendar in which the alert triggered.
  • calendarEventId: Id The CalendarEvent id for the alert that triggered. Note, for a recurring event this is the id of the base event, never a synthetic id for a particular instance.
  • uid: String The uid property of the CalendarEvent for the alert that triggered.
  • recurrenceId: LocalDate|null The recurrenceId for the instance of the event for which this alert is being triggered, or null if the event is not recurring.
  • alertId: String The id for the alert that triggered.

7. Calendar Event Notifications

The CalendarEventNotification data type records changes made by external entities to events in calendars the user is subscribed to. Notifications are stored in the same Account as the CalendarEvent that was changed.

Notifications are only created by the server; users cannot create them directly. Clients SHOULD present the list of notifications to the user and allow them to dismiss them. To dismiss a notification you use a standard "/set" call to destroy it.

The server SHOULD create a CalendarEventNotification whenever an event is added, updated or destroyed by another user or due to receiving an iTIP [RFC5546] or other scheduling message in a calendar this user is subscribed to. The server SHOULD NOT create notifications for events implicitly deleted due to the containing calendar being deleted.

The CalendarEventNotification does not have any per-user data. A single instance may therefore be maintained on the server for all sharees of the notification. The server need only keep track of which users have yet to destroy the notification.

7.1. Auto-deletion of Notifications

The server MAY limit the maximum number of notifications it will store for a user. When the limit is reached, any new notification will cause the previously oldest notification to be automatically deleted.

The server MAY coalesce events if appropriate, or remove events that it deems are no longer relevant or after a certain period of time. The server SHOULD automatically destroy a notification about an event if the user updates or destroys that event (e.g. if the user sends an RSVP for the event).

7.2. Object Properties

The CalendarEventNotification object has the following properties:

  • id: String The id of the CalendarEventNotification.
  • created: UTCDate The time this notification was created.
  • changedBy: Person Who made the change. The Person object has the following properties:

    • name: String The name of the person who made the change.
    • email: String|null The email of the person who made the change, or null if no email is available.
    • principalId: String|null The id of the Principal corresponding to the person who made the change, if any. This will be null if the change was due to receving an iTIP message.
  • comment: String|null Comment sent along with the change by the user that made it. (e.g. COMMENT property in an iTIP message), if any.
  • type: String This MUST be one of

    • created
    • updated
    • destroyed
  • calendarEventId: String The id of the CalendarEvent that this notification is about.
  • isDraft: Boolean (created/updated only) Is this event a draft?
  • event: JSEvent The data before the change (if updated or destroyed), or the data after creation (if created).
  • eventPatch: PatchObject (updated only) A patch encoding the change between the data in the event property, and the data after the update.

If the change only affects a single instance of a recurring event, the server MAY set the event and eventPatch properties for just that instance; the calendarEventId MUST still be for the base event.

7.3. CalendarEventNotification/get

This is a standard "/get" method as described in [RFC8620], Section 5.1.

7.4. CalendarEventNotification/changes

This is a standard "/changes" method as described in [RFC8620], Section 5.2.

7.5. CalendarEventNotification/set

This is a standard "/set" method as described in [RFC8620], Section 5.3.

Only destroy is supported; any attempt to create/update MUST be rejected with a forbidden SetError.

7.6. CalendarEventNotification/query

This is a standard "/query" method as described in [RFC8620], Section 5.5.

7.6.1. Filtering

A FilterCondition object has the following properties:

  • after: UTCDate|null The creation date must be on or after this date to match the condition.
  • before: UTCDate|null The creation date must be before this date to match the condition.
  • type: String The type property must be the same to match the condition.
  • calendarEventIds: Id[]|null A list of event ids. The calendarEventId property of the notification must be in this list to match the condition.

7.6.2. Sorting

The "created" property MUST be supported for sorting.

7.7. CalendarEventNotification/queryChanges

This is a standard "/queryChanges" method as described in [RFC8620], Section 5.6.

8. CalendarPreferences

A CalendarPreferences object stores information about the user's preferences and defaults.

The following JMAP methods are supported.

8.1. CalendarPreferences/get

This is a standard "/get" method as described in [RFC8620], Section 5.1.

There MUST only be exactly one CalendarPreferences object in an account. It MUST have the id "singleton".

8.2. CalendarPreferences/set

This is a standard "/set" method as described in [RFC8620], Section 5.3. There is always exactly one CalendarPreferences object in an account; it cannot be created or destroyed, only updated.

9. Examples

For brevity, in the following examples only the "methodCalls" property of the Request object, and the "methodResponses" property of the Response object is shown.

9.1. Fetching initial data

A user has authenticated and the client has fetched the JMAP Session object. It finds a single Account with the "urn:ietf:params:jmap:calendars" capability, with id "a0x9", and wants to display all the calendar information for January 2023 in the Australia/Melbourne time zone. It might make the following request:

[
  ["Calendar/get", {
    "accountId": "a0x9"
  }, "0"],
  ["ParticipantIdentity/get", {
    "accountId": "a0x9"
  }, "1"],
  ["CalendarPreferences/get", {
    "accountId": "a0x9",
    "ids": ["singleton"]
  }, "2"],
  ["CalendarEvent/query", {
    "accountId": "a0x9",
    "timeZone": "Australia/Melbourne",
    "filter": {
      "after": "2023-01-01T00:00:00",
      "before": "2023-02-01T00:00:00"
    }
  }, "3"],
  ["CalendarEvent/get", {
        "accountId": "a0x9",
        "#ids":{
          "resultOf":"3",
          "name":"CalendarEvent/query",
          "path":"/ids"
        }
  }, "4"]
]

The server might respond with something like:

[
  ["Calendar/get", {
    "accountId": "a0x9",
    "list": [{
       "id": "062adcfa-105d-455c-bc60-6db68b69c3f3",
       "name": "Private",
       "sortOrder": 12
       "defaultAlertsWithTime": null,
       ...
     }, {
       "id": "3ddf2ad7-0e0c-4fb5-852d-f0ff56f3c662",
       "name": "Work",
       "sortOrder": 4
       "defaultAlertsWithTime": {
         "631BE24C-A3B6-11EC-BF4C-B027680D752E": {
           "@type": "Alert",
           "action": "display",
           "trigger": {
             "@type": "OffsetTrigger",
             "offset": "-PT1H",
             "relativeTo": "start"
           }
         }
       },
       ...
     }],
     "notFound": [],
     "state": "~506"
  }, "0"],
  ["ParticipantIdentity/get", {
        "accountId": "a0x9",
    "list": [{
       "id": "3",
       "name": "Jane Doe"
       "scheduleId": "mailto:jane@example.com",
       "sendTo": {
         "imip": "mailto:jane@example.com",
         "other":
                "https://example.com/uri/for/internal/scheduling"
       }
     }],
     "notFound": [],
     "state": "lgkf:98144:aae"
  }, "1"],
  ["CalendarPreferences/get", {
    "accountId": "a0x9",
    "list": [{
       "id": "singleton",
       "defaultCalendarId":
         "3ddf2ad7-0e0c-4fb5-852d-f0ff56f3c662"
       "defaultParticipantIdentityId": "3"
     }],
     "notFound": [],
     "state": "lgkf:98144:aae"
  }, "2"],
  ["CalendarEvent/query", {
    "accountId": "a0x9",
    "canCalculateChanges": false,
    "position": 0,
    "queryState": "~206",
    "ids": [
      "E-01c9626e-1490-43df-a34f-457021256281",
      "E-07a2b89d-96b6-4920-982a-54fdf0a386ce",
      ...
    ]
  }, "3"],
  ["CalendarEvent/get", {
        "accountId": "a0x9",
        "list": [{
       "id": "E-01c9626e-1490-43df-a34f-457021256281",
       "calendarIds": {
          "3ddf2ad7-0e0c-4fb5-852d-f0ff56f3c662": true,
       },
       "title": "Q1 All hands"
       "start": "20230109T10:00:00",
       "duration": "PT1H",
       "timeZone": "Australia/Sydney",
       ...
     }, ...],
     "notFound": [],
     "state": "$$/413/206"
  }, "4"]
]

The client now has everything it needs to display that month in full.

9.2. Creating an event

Suppose the user asks the client to create a new event. The client should default to adding it to the "Work" calendar, as this is the default indicated in CalendarPreferences.

[
  ["CalendarEvent/set", {
    "accountId":"a0x9",
    "create":{
      "k559":{
        "uid":"5d5776f6-ff8e-4bfd-ab3e-fe2fe5d4fa91",
        "calendarIds":{
          "3ddf2ad7-0e0c-4fb5-852d-f0ff56f3c662":true
        },
        "title":"Party at Pete’s",
        "start":"2023-02-03T19:00:00",
        "duration":"PT3H0M0S",
        "timeZone":"Australia/Melbourne",
        "showWithoutTime":false,
        "participants":{
          "1":{
            "@type":"Participant",
            "name": "Jane Doe"
            "scheduleId": "mailto:jane@example.com",
            "sendTo": {
              "imip": "mailto:jane@example.com",
              "other":
                 "https://example.com/uri/for/internal/scheduling"
            }
            "kind":"individual",
            "roles":{
              "attendee":true,
              "owner":true
            },
            "participationStatus":"accepted",
            "expectReply":false
          },
          "2":{
            "@type":"Participant",
            "name":"Joe Bloggs",
            "sendTo":{
              "imip":"mailto:joe@example.com"
            },
            "kind":"individual",
            "roles":{
              "attendee":true
            },
            "participationStatus":"needs-action",
            "expectReply":true
          }
        },
        "mayInviteSelf":false,
        "mayInviteOthers":false,
        "useDefaultAlerts":false,
        "alerts":null
      }
    },
    "sendSchedulingMessages":true
  }, "0"]
]

As the event has participants, the server sets a "replyTo" property. This server uses a special email address for receiving iTIP RSVPs rather than just receiving them at the owner's regular email address, and also provides a web page for people that don't have calendar clients supporting iTIP. The response may look something like this:

[
  ["CalendarEvent/set", {
    "accountId":"a0x9",
    "created":{
      "k559":{
        "id":"E-5d5776f6-ff8e-4bfd-ab3e-fe2fe5d4fa91",
        "isOrigin": true,
        "@type": "Event",
        "created": "20221005T20:42:13Z",
        "updated": "20221005T20:42:13Z",
        "sequence": 1,
        "replyTo": {
          "imip": "3e87-1b18bb5e6b4@itip.example.com",
          "web": https://cal.example.com/
                5d5776f6-ff8e-4bfd-ab3e-fe2fe5d4fa91/?
                auth=bfc0-4ba3-9e44"
        }
      }
    },
    ...
  }, "0"]
]

9.3. Snoozing an alert

The client is connected to the event source and receives a push:

{
        "@type": "CalendarAlert",
        "accountId": "a0x9",
        "calendarEventId": "E-7e93e3ee-4e6e-408a-9adc-cbaf1dbd0a3f",
        "uid": "b6f7e27b-5872-4b52-b457-0242541bb01c",
        "recurrenceId": null,
        "alertId": "7519a951-1e6f-4a6c-b08b-20dd2e5a89cd"
}

Not finding this event in its local cache, the client fetches the information for this event that it needs to show the alert by making the following request:

[
  ["CalendarEvent/get", {
        "accountId": "a0x9",
        "ids":["E-7e93e3ee-4e6e-408a-9adc-cbaf1dbd0a3f"],
        "properties": ["calendarIds", title", "start",
          "timeZone", "useDefaultAlerts", "alerts"]
  }, "0"]
]

In response it receives:

[
  ["CalendarEvent/get", {
        "accountId": "a0x9",
        "list": [{
       "id": "E-01c9626e-1490-43df-a34f-457021256281",
       "calendarIds": {
          "3ddf2ad7-0e0c-4fb5-852d-f0ff56f3c662": true,
       },
       "title": "Team catchup"
       "start": "20230210T17:00:00",
       "timeZone": "America/New_York",
       "useDefaultAlerts": false,
       "alerts": {
         "7519a951-1e6f-4a6c-b08b-20dd2e5a89cd": {
           "@type": "Alert",
           "action": "display",
           "trigger": {
             "@type": "OffsetTrigger",
             "relativeTo": "start",
             "offset": "-PT1H"
           }
         }
       }
     }],
     "notFound": [],
     "state": "$$/414/208"
  }, "0"]
]

The client displays an alert in a platform-appropriate manner. Presuming the user here is in the Australia/Melbourne time zone, this might look something like:

+----------------------------------------+
|                                        |
|  Reminder: Team catchup                |
|  Today at 10am (in 1 hour)             |
|                             [Snooze\/] |
+----------------------------------------+

The user snoozes the notification for 30 minutes. The client dismisses the current notification and sends an update to the event to the server:

[
  ["CalendarEvent/set", {
        "accountId": "a0x9",
        "update": {
      "E-01c9626e-1490-43df-a34f-457021256281": {
        "alerts/7519a951-1e6f-4a6c-b08b-20dd2e5a89cd
                /acknowledged": "20230110T23:00:31Z",
        "alerts/86b0-318b8291045f": {
          "@type": "Alert",
          "action": "display",
          "trigger": {
            "@type": "AbsoluteTrigger",
            "when": "20230210T23:30:00Z",
            "relatedTo": {
              "7519a951-1e6f-4a6c-b08b-20dd2e5a89cd": {
                "@type": "Relation",
                "relation": {
                  "parent": true,
                }
              }
                }
          }
        }
      }
        }
  }, "0"]
]

Any other connected client will receive a push, sync the change and dismiss any duplicate alert. After the snooze time has elapsed, the new alert will trigger.

10. Security Considerations

All security considerations of JMAP [RFC8620] and JSCalendar [RFC8984] apply to this specification. Additional considerations specific to the data types and functionality introduced by this document are described in the following subsections.

10.1. Privacy

Calendars often contain the precise movements, activities, and contacts of people; all intensely private data. Privacy leaks can have real world consequences, and calendar servers and clients MUST be mindful of the need to keep all data secure.

Servers MUST enforce the ACLs set on calendars to ensure only authorised data is shared. The additional restrictions specified by the "privacy" property of a JSEvent object (see [RFC8984] Section 4.4.3) MUST also be enforced.

Users may have multiple Participant Identities that they use for areas of their life kept private from one another. Using one identity with an event MUST NOT leak the existence of any other identity. For example, sending an RSVP from identity worklife@example.com MUST NOT reveal anything about another identity present in the account such as privatelife@example.org.

Severs SHOULD enforce that invitations sent to external systems are only transmitted via secure encrypted and signed connections to protect against eavesdropping and modification of data.

10.2. Spoofing

When receiving events and updates from external systems, it can be hard to verify that the identity of the author is who they claim to be. When receiving events via email, DKIM [RFC6376] and S/MIME [RFC8551] are two mechanisms that may be used to verify certain properties about the email data, which can be correlated with the event information.

10.3. Denial-of-service

There are many ways in which a calendar user can make a request liable to cause a calendar server to spend an inordinate amount of processing time. Care must be taken to limit resources allocated to any one user to ensure the system does not become unresponsive. The following subsections list particularly hazardous areas.

10.3.1. Expanding Recurrences

Recurrence rules can be crafted to occur as frequently as every second. Servers MUST be careful to not allow resources to be exhausted when expanding, and limit the number of expansions they will create. Equally, rules can be generated that never create any occurrences at all. Servers MUST be careful to limit the work spent iterating in search of the next occurrence.

10.3.2. Firing alerts

An alert firing for an event can cause a notification to be pused to the user's devices, or to send them an email. Servers MUST rate limit the number of alerts sent for any one user. The combination of recurring events with multiple alerts can in particular define unreasonably frequent alerts, leading to denial of service for either the server processing them or the user's devices receiving them.

Similarly, clients generating alerts from the data on device must take the same precautions.

The "email" alert type (see RFC8984, Section 4.5.2) causes an email to be sent when triggered. Clients MUST ignore this alert type; the email is sent only be the calendar server. There is no mechanism in JSCalendar to specify a particular email address: the server MUST only allow alerts to be sent to an address it has verified as belonging to the user to avoid this being used as a spamming vector.

10.3.3. Load spikes

Since most events are likely to start on the hour mark, a large spike of activity is often seen at these times, with particularly large spikes at certain common times in the time zone of the server's user base. In particular, a large number of alerts (across different users and events) will be triggered at the same time. Servers may mitigate this somewhat by adding jitter to the triggering of the alerts; it is RECOMMENDED to fire them slightly early rather than slightly late if needed to spread load.

10.4. Spam

Invitations received from an untrusted source may be spam. If this is added to the user's calendar automatically it can be very obtrusive, especially if it is a recurring event that now appears every day. Incoming invitations to events should be subject to spam scanning, and suspicious events should not be added to the calendar automatically.

Servers should strip any alerts on invitations when adding to the user's calendar; the useDefaultAlerts property should be set instead to apply the user's preferences.

Similarly, a malicious user may use a calendar system to send spam by inviting people to an event. Outbound iTIP should be subject to all the same controls used on outbound email systems, and rate limited as appropriate. A rate limit on the number of distinct recipients as well as overall messages is recommended.

11. IANA Considerations

11.1. JMAP Capability Registration for "calendars"

IANA will register the "calendars" JMAP Capability as follows:

Capability Name: urn:ietf:params:jmap:calendars

Specification document: this document

Intended use: common

Change Controller: IETF

Security and privacy considerations: this document, Section XXX

11.2. JMAP Capability Registration for "calendars:preferences"

IANA will register the "calendars:preferences" JMAP Capability as follows:

Capability Name: urn:ietf:params:jmap:calendars:preferences

Specification document: this document

Intended use: common

Change Controller: IETF

Security and privacy considerations: this document, Section XXX

11.3. JMAP Capability Registration for "principals:availability"

IANA will register the "principals:availability" JMAP Capability as follows:

Capability Name: urn:ietf:params:jmap:principals:availability

Specification document: this document

Intended use: common

Change Controller: IETF

Security and privacy considerations: this document, Section XXX

11.4. Update to the JSCalendar Properties Registry

IANA will update the "JSCalendar Properties" registry to add a new column called "Is Per-User". The value in this column for each entry MUST be either "yes" or "no", indicating whether each sharee of the object should be able to set their own value for this property without affecting the value for other sharees.

### Update to "JSCalendar Properties" Registry Template

An additional field is added to the template:

Is Per-User

### Initial values for existing registrations

IANA will set "Is per-user: yes" on the following property registrations:

  • keywords
  • color
  • freeBusyStatus
  • useDefaultAlerts
  • alerts

All other existing registrations will have "Is per-user: no".

11.5. JSCalendar Property Registrations

IANA will register the following additional properties in the JSCalendar Properties Registry.

11.5.1. id

Property Name: id

Property Type: Id

Property Context: JSEvent, JSTask

Intended Use: Reserved

Is per-user: no

11.5.2. calendarIds

Property Name: calendarIds

Property Type: Id[Boolean]

Property Context: JSEvent, JSTask

Intended Use: Reserved

Is per-user: no

11.5.3. isDraft

Property Name: isDraft

Property Type: Boolean

Property Context: JSEvent, JSTask

Intended Use: Reserved

Is per-user: no

11.5.4. utcStart

Property Name: utcStart

Property Type: UTCDateTime

Property Context: JSEvent, JSTask

Intended Use: Reserved

Is per-user: no

11.5.5. utcEnd

Property Name: utcEnd

Property Type: UTCDateTime

Property Context: JSEvent, JSTask

Intended Use: Reserved

Is per-user: no

11.5.6. mayInviteSelf

Property Name: mayInviteSelf

Property Type: Boolean (default: false)

Property Context: JSEvent, JSTask

Reference: This document, Section XXX.

Intended Use: Common

Is per-user: no

11.5.7. mayInviteOthers

Property Name: mayInviteOthers

Property Type: Boolean (default: false)

Property Context: JSEvent, JSTask

Reference: This document, Section XXX.

Intended Use: Common

Is per-user: no

11.5.8. hideAttendees

Property Name: hideAttendees

Property Type: Boolean (default: false)

Property Context: JSEvent, JSTask

Reference: This document, Section XXX.

Intended Use: Common

Is per-user: no

12. Normative References

[RFC2119]
Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, , <https://www.rfc-editor.org/info/rfc2119>.
[RFC2397]
Masinter, L., "The "data" URL scheme", RFC 2397, DOI 10.17487/RFC2397, , <https://www.rfc-editor.org/info/rfc2397>.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, , <https://www.rfc-editor.org/info/rfc3986>.
[RFC6376]
Crocker, D., Ed., Hansen, T., Ed., and M. Kucherawy, Ed., "DomainKeys Identified Mail (DKIM) Signatures", STD 76, RFC 6376, DOI 10.17487/RFC6376, , <https://www.rfc-editor.org/info/rfc6376>.
[RFC8174]
Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, , <https://www.rfc-editor.org/info/rfc8174>.
[RFC8551]
Schaad, J., Ramsdell, B., and S. Turner, "Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 4.0 Message Specification", RFC 8551, DOI 10.17487/RFC8551, , <https://www.rfc-editor.org/info/rfc8551>.
[RFC8620]
Jenkins, N. and C. Newman, "The JSON Meta Application Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, , <https://www.rfc-editor.org/info/rfc8620>.
[RFC8984]
Jenkins, N. and R. Stepanek, "JSCalendar: A JSON Representation of Calendar Data", RFC 8984, DOI 10.17487/RFC8984, , <https://www.rfc-editor.org/info/rfc8984>.

13. Informative References

[RFC4791]
Daboo, C., Desruisseaux, B., and L. Dusseault, "Calendaring Extensions to WebDAV (CalDAV)", RFC 4791, DOI 10.17487/RFC4791, , <https://www.rfc-editor.org/info/rfc4791>.
[RFC5546]
Daboo, C., Ed., "iCalendar Transport-Independent Interoperability Protocol (iTIP)", RFC 5546, DOI 10.17487/RFC5546, , <https://www.rfc-editor.org/info/rfc5546>.
[RFC6047]
Melnikov, A., Ed., "iCalendar Message-Based Interoperability Protocol (iMIP)", RFC 6047, DOI 10.17487/RFC6047, , <https://www.rfc-editor.org/info/rfc6047>.

Authors' Addresses

Neil Jenkins (editor)
Fastmail
PO Box 234, Collins St West
Melbourne VIC 8007
Australia
Michael Douglass (editor)
Spherical Cow Group
226 3rd Street
Troy, NY 12180
United States of America