JMAP B. Gondwana, Ed. Internet-Draft Fastmail Updates: 8620 (if approved) 8 October 2021 Intended status: Standards Track Expires: 11 April 2022 JMAP Blob management extension draft-ietf-jmap-blob-02 Abstract The JMAP base protocol (RFC8620) provides the ability to upload and download arbitrary binary data via HTTP POST and GET on defined endpoint. This binary data is called a "Blob". This extension adds additional ways to create and access Blobs, by making inline method calls within a standard JMAP request. This extension also adds a reverse lookup mechanism to discover where blobs are referenced within other data types. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 11 April 2022. Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights Gondwana Expires 11 April 2022 [Page 1] Internet-Draft JMAP Blob October 2021 and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Conventions Used In This Document . . . . . . . . . . . . . . 3 3. Blobs . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1. Blob/set . . . . . . . . . . . . . . . . . . . . . . . . 3 3.1.1. create . . . . . . . . . . . . . . . . . . . . . . . 3 3.1.2. update . . . . . . . . . . . . . . . . . . . . . . . 4 3.1.3. destroy . . . . . . . . . . . . . . . . . . . . . . . 4 3.2. Blob/get . . . . . . . . . . . . . . . . . . . . . . . . 5 3.3. Blob/lookup . . . . . . . . . . . . . . . . . . . . . . . 7 4. Security considerations . . . . . . . . . . . . . . . . . . . 8 5. IANA considerations . . . . . . . . . . . . . . . . . . . . . 9 5.1. JMAP Capability registration for "blob" . . . . . . . . . 9 5.2. JMAP Error Codes Registration for "unknownDataType" . . . 9 5.3. Creation of "JMAP Data Types" Registry . . . . . . . . . 10 6. Changes . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 11 8. Normative References . . . . . . . . . . . . . . . . . . . . 11 9. Informative References . . . . . . . . . . . . . . . . . . . 12 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 12 1. Introduction Sometimes JMAP ([RFC8620]) interactions require creating a Blob and then referencing it. In the same way that IMAP Literals ([RFC7888]) were extended to reduce roundtrips for simple data, embedding simple small blobs into the JMAP method stream can reduce roundtrips. Likewise, when fetching an object, it can be useful to also fetch the raw content of that object without a separate roundtrip. Where JMAP is being proxied through a system which applies additional access restrictions, it can be useful to be able to see where a blob is referenced in order to decide whether to allow it to be downloaded. Gondwana Expires 11 April 2022 [Page 2] Internet-Draft JMAP Blob October 2021 2. Conventions Used In This Document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 3. Blobs A blob is a sequence of zero or more octets. The JMAP base spec [RFC8620] defines the Blob/copy method, which is unchanged by this specfication. 3.1. Blob/set This is a standard JMAP set method. 3.1.1. create *Properties:* Exactly one of: * data:asText: String|null * data:asBase64: String|null * data:asHex: String|null * catenate: [SetObject] _list of octet sources in order_ Also: * type: String|null _hint for media type of the data_ Result is: * id: Id the blobId * type: String|null _media type as given in the creation (if any); or detected from content; or null_ * size: UnsignedInt _as per RFC8620 - the size of the file in Octets_ Gondwana Expires 11 April 2022 [Page 3] Internet-Draft JMAP Blob October 2021 Any other properties identical to those that would be returned in the JSON response of the RFC8620 upload endpoint. SetObject: Any one of * data:asText: String|null * data:asBase64: String|null * data:asHex: String|null OR a blobId source: * blobId: Id * offset: UnsignedInt|null * length: UnsignedInt|null 3.1.2. update It is not possible to update a Blob, so any update will result in a notUpdated response. 3.1.3. destroy If an uploaded Blob is not referenced by any persistent object, the server SHOULD destroy the object. Some systems use a content-based ID for blobs, so the server MAY respond destroyed and yet that blobId still exist with the same content. Example: Gondwana Expires 11 April 2022 [Page 4] Internet-Draft JMAP Blob October 2021 Method Call: [ "Blob/set", { "accountId" : "account1", "create" : { "1": { "data:asBase64": "iVBORw0KGgoAAAANSUhEUgAAAAEAAAABAQMAAAAl21bKA AAAA1BMVEX/AAAZ4gk3AAAAAXRSTlN/gFy0ywAAAApJRE FUeJxjYgAAAAYAAzY3fKgAAAAASUVORK5CYII=", "type" : "image/png" }, }, }, "R1" ] Response: [ "Blob/set", { "accountId" : "account1", "created" : { "1": { "id" : "G4c6751edf9dd6903ff54b792e432fba781271beb", "type" : "image/png", "size" : 95 }, }, }, "R1" ] 3.2. Blob/get A standard JMAP get with two additional parameters: * offset: UnsignedInt|null _start this many octets into the blob data_ * length: UnsignedInt|null _return at most this many octets of the blob data_ *Properties:* Any of * data:asText - _the raw octets of the selected range - NOTE that they must be able to be represented as utf8 in the JSON response_ * data:asBase64 - _the octets of the selected range encoded as base64_ Gondwana Expires 11 April 2022 [Page 5] Internet-Draft JMAP Blob October 2021 * data:asHex - _the octets of the selected range encoded as lowercase hexadecimal (0-9, a-f)_ * data _selects data:asText if the content is UTF-8, or data:asBase64_ * size If not given, returns data and size. The size value is always the number of octets in the blob, regardless of offset and length, while all the data fields contain just the octets within the selected range. If there are no octets within the selected range, the data fields will be the empty string. Example (a blob containing the string "The quick brown fox jumped over the lazy dog!") Method Call: [ "Blob/get", { "accountId" : "account1", "ids" : [ "G6ec94756e3e046be78fcb33953b85b944e70673e", "not-a-blob" ], "properties" : [ "data:asText", "data:asBase64", "data:asHex", "size" ], "offset" : 4, "length" : 9 }, "R1" ] Response: [ "Blob/get", { "accountId" : "account1", "list" : [ { "id" : "G6ec94756e3e046be78fcb33953b85b944e70673e", "data:asText" : "quick bro", "data:asBase64" : "cXVpY2sgYnJvCg==", "data:asHex" : "717569636b2062726f", "size" : 46 } ], "notFound" : [ "not-a-blob" ] }, "R1" ] Gondwana Expires 11 April 2022 [Page 6] Internet-Draft JMAP Blob October 2021 3.3. Blob/lookup Given a list of blobIds, this method does a reverse lookup in each of the provided type names to find the list of Ids within that data type which reference the provided blob. The definition of reference is somewhat loosely defined, but roughly means "you could discover this blobId by looking inside this object", for example if a Mailbox contains an Email which references the blobId, then it references that blobId. Likewise for a Thread. *Parameters* * accountId: "Id" The id of the account used for the call. * types: [String] A list of type names from the "JMAP Data Types" registry. Only names for which "Can Reference Blobs" is true may be specified, and the capability which defines each type must also be used by the overall JMAP request in which this method is called. If a type name is not known by the server, or the associated capability has not been requested, then the server returns an "unknownDataType" error. * ids: [Id] A list of blobId values to be looked for. *Response* * list: [BlobInfo] A list of BlobInfo objects. *BlobInfo Object* * id: Id The Blob Identifier. * types: String[Id List] A map from type name to list of Ids of that data type (e.g. the name "Email" maps to a list of emailIds) Gondwana Expires 11 April 2022 [Page 7] Internet-Draft JMAP Blob October 2021 If a blob is not visible to a user at all, then the server SHOULD return that blobId in the notFound array, however it may also return an empty list for each type name, as it may not be able to know if other data types do reference that blob. e.g. [ "Blob/lookup", { "types": ["Mailbox", "Thread", "Email"], "ids": ["Gd2f81008cf07d2425418f7f02a3ca63a8bc82003", "not-a-blob"] }, "R1" ] Response: [ "Blob/lookup", { "list": [ { "id": "Gd2f81008cf07d2425418f7f02a3ca63a8bc82003", "types": { "Mailbox": ["M54e97373", Mcbe6b662"], "Thread": ["T1530616e"], "Email": ["E16e70a73eb4", "E84b0930cf16"] } } ], "notFound": ["not-a-blob"] }, "R1"] 4. Security considerations JSON parsers are not all consistent in handling non-UTF-8 data. JMAP requires that all JSON data be UTF-8 encoded, so servers MUST either return data:asBase64 or isEncodingProblem: true and modify the data to be UTF-8 safe. Servers MUST apply any access controls such that if the authenticated user would be unable to discover the blobId by making queries, then this fact can't be discovered via a Blob/lookup. For example, if an Email exists in a Mailbox which the authenticated user does not have access to see, then that emailId MUST not be returned in a lookup for a blob which is referenced by that email. Gondwana Expires 11 April 2022 [Page 8] Internet-Draft JMAP Blob October 2021 If a server might sometimes return all names empty rather than putting a blobId in the notFound response to a Blob/get, then the server SHOULD always return the same type of response, regardless of whether a blob exists but the user can't access it, or doesn't exist at all. This avoids leaking information about the existence of the blob. The server MUST NOT trust that the data given to a Blob/set is a well formed instance of the specified media type, and if the server attempts to parse the given blob, only hardened parsers designed to deal with arbitrary untrusted data should be used. The server SHOULD NOT reject data on the grounds that it is not a valid specimen of the stated type. 5. IANA considerations 5.1. JMAP Capability registration for "blob" IANA is requested to register the "blob" JMAP Capability as follows: Capability Name: urn:ietf:params:jmap:blob Specification document: this document Intended use: common Change Controller: IETF Security and privacy considerations: this document, Section XXX 5.2. JMAP Error Codes Registration for "unknownDataType" IANA is requested to register the "unknownDataType" JMAP Error Code as follows: JMAP Error Code: unknownDataType Intended use: common Change Controller: IETF Reference: this document Description: The server does not recognise this data type, or the capability to enable it was not present. Gondwana Expires 11 April 2022 [Page 9] Internet-Draft JMAP Blob October 2021 5.3. Creation of "JMAP Data Types" Registry IANA is requested to create a new registry "JMAP Data Types" with the initial content: +================+=========+======+=====================================+=========+ |Type Name |Can |Can |Capability |Reference| | |Reference|use | | | | |Blobs |for | | | | | |State | | | | | |Change| | | +================+=========+======+=====================================+=========+ |Core |No |No |urn:ietf:params:jmap:core |[RFC8620]| +----------------+---------+------+-------------------------------------+---------+ |PushSubscription|No |No |urn:ietf:params:jmap:core |[RFC8620]| +----------------+---------+------+-------------------------------------+---------+ |Mailbox |Yes |Yes |urn:ietf:params:jmap:mail |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |Thread |Yes |Yes |urn:ietf:params:jmap:mail |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |Email |Yes |Yes |urn:ietf:params:jmap:mail |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |EmailDelivery |No |Yes |urn:ietf:params:jmap:mail |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |SearchSnippet |No |No |urn:ietf:params:jmap:mail |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |Identity |No |Yes |urn:ietf:params:jmap:submission |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |EmailSubmission |No |Yes |urn:ietf:params:jmap:submission |[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |VacationResponse|No |Yes |urn:ietf:params:jmap:vacationresponse|[RFC8621]| +----------------+---------+------+-------------------------------------+---------+ |MDN |No |No |urn:ietf:params:jmap:mdn |[RFC9007]| +----------------+---------+------+-------------------------------------+---------+ Table 1 6. Changes EDITOR: please remove this section before publication. The source of this document exists on github at: https://github.com/brong/draft-gondwana-jmap-blob/ (https://github.com/brong/draft-gondwana-jmap-blob/) *draft-ieft-jmap-blob-02*: Gondwana Expires 11 April 2022 [Page 10] Internet-Draft JMAP Blob October 2021 * fixed incorrect RFC number in reference and HTTP PUT -> POST, thanks Ken. * added acknowledgements section * removed all 'datatype' text and changed to 'data type' or 'type name' as appropriate (issue #1 proposal) * expanded security considerations section and moved optional Blob/ lookup empty case into Blob/lookup section *draft-ieft-jmap-blob-01*: * renamed 'datatypes' to 'types' to align with PushSubscription from RFC8620. * added example for Blob/get * specified offset and length precisely *draft-ieft-jmap-blob-00*: * initial adoption as an IETF document, otherwise identical to draft-gondwana-jmap-blob-02 *draft-gondwana-jmap-blob-02* * renamed 'objects' to 'datatypes' * specified Blob/lookup * added IANA registry for datatypes *draft-gondwana-jmap-blob-01* * added an example *draft-gondwana-jmap-blob-00* * initial proposal 7. Acknowledgements Alexey Melnikov, Ken Murchison, and the JMAP working group at the IETF. 8. Normative References Gondwana Expires 11 April 2022 [Page 11] Internet-Draft JMAP Blob October 2021 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . 9. Informative References [RFC8620] Jenkins, N. and C. Newman, "The JSON Meta Application Protocol (JMAP)", RFC 8620, DOI 10.17487/RFC8620, July 2019, . [RFC7888] Melnikov, A., Ed., "IMAP4 Non-synchronizing Literals", RFC 7888, DOI 10.17487/RFC7888, May 2016, . [RFC8621] Jenkins, N. and C. Newman, "The JSON Meta Application Protocol (JMAP) for Mail", RFC 8621, DOI 10.17487/RFC8621, August 2019, . Author's Address Bron Gondwana (editor) Fastmail Level 2, 114 William St Melbourne VIC 3000 Australia Email: brong@fastmailteam.com URI: https://www.fastmail.com Gondwana Expires 11 April 2022 [Page 12]