INTERNET-DRAFT Mark Andrews (CSIRO) January 1998 Forcing Fragmentation to Network MTU Status of This Memo This document is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet- Drafts as reference material or to cite them other than as ``work in progress.'' To learn the current status of any Internet-Draft, please check the ``1id-abstracts.txt'' listing contained in the Internet- Drafts Shadow Directories on ftp.is.co.za (Africa), nic.nordu.net (Europe), munnari.oz.au (Pacific Rim), ds.internic.net (US East Coast), or ftp.isi.edu (US West Coast). Abstract There exists a class of applications which cannot accept Path MTU discovery [RFC-1191]. This is recommended to be turned on by default for IPv6 [RFC-1883, 4.5, 5]. This document describes an extension to the BSD API [RFC-2133] to inform the kernel when it should be fragmenting at the network MTU rather than trying to discover the path MTU. Path MTU discovery works well when there is a stream of data. However for distributed servers sending small answers larger than the network MTU to many clients the lack of fragmentation in intermediate nodes is anathema. 1 - No Path MTU Discovery Disabling path MTU. This would be a binary option, on a per socket basis. If set the kernel would fragment all IP packets generated by Expires July 1998 [Page 1] INTERNET-DRAFT BSD FRAGMENT June 1996 this socket at the network MTU (576) [RFC-1883, 5] unless it has a priori knowledge of the path MTU which it could then use. int discover = 0; if (setsockopt(s, IPPROTO_IPV6, IPV6_MTU_DISCOVER, (char*) &discover, sizeof(discover)) == -1) perror("setsockopt IPV6_MTU_DISCOVER"); 2 - Setting IP Fragmentation Size A socket option to explicitly set the maximum IP fragment size for messages derived from this socket. This should be used when it is known that the path MTU is greater than the network MTU. When combined with disabling path MTU discovery the resultant behaviour should be the same as if the network MTU was set to this value. size_t mtu = 576; if (setsockopt(s, IPPROTO_IPV6, IPV6_MTU, (char*) &mtu, sizeof(mtu)) == -1) perror("setsockopt IPV6_MTU"); 3 - Security Considerations This document is believed to introduce no security problems. References [RFC-1191] Mogul, J., and S. Deering, "Path MTU Discovery", RFC 1191, November 1990. [RFC-1883] Deering, S., and Hinden, R., "Internet Protocol, Version 6 (IPv6) Specification", RFC 1883, December 1995. [RFC-2133] Gilligan, R. E., Thomson, S., and Bound, J., "Basic Socket Interface Extensions for IPv6", RFC 2133, April 1996. Expires July 1998 [Page 2] INTERNET-DRAFT BSD FRAGMENT June 1996 Author' Address Mark Andrews CSIRO Mathematical and Information Sciences Locked Bag 17 North Ryde NSW 2113 AUSTRALIA +61 2 9325 3148 Expires July 1998 [Page 3]