Network Working Group T. Dietz, Ed.
Internet-Draft NEC Europe Ltd.
Intended status: Standards Track A. Kobayashi
Expires: January 14, 2010 NTT PF Lab.
B. Claise
Cisco Systems, Inc.
July 13, 2009
Definitions of Managed Objects for IP Flow Information Export
draft-ietf-ipfix-mib-07.txt
Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on January 14, 2010.
Copyright Notice
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 1]
Internet-Draft IPFIX MIB July 2009
Abstract
This document defines managed objects for IP Flow Information Export
(IPFIX). These objects provide information for monitoring IPFIX
Exporters and IPFIX Collectors including the basic configuration
information.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. IPFIX Documents Overview . . . . . . . . . . . . . . . . . . . 5
3. The Internet-Standard Management Framework . . . . . . . . . . 6
4. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 7
5. Structure of the IPFIX MIB . . . . . . . . . . . . . . . . . . 8
5.1. The Transport Session Table . . . . . . . . . . . . . . . 8
5.2. The Template Table . . . . . . . . . . . . . . . . . . . . 10
5.3. The Template Definition Table . . . . . . . . . . . . . . 12
5.4. The Export Table . . . . . . . . . . . . . . . . . . . . . 13
5.5. The Metering Process Table . . . . . . . . . . . . . . . . 15
5.6. The Observation Point Table . . . . . . . . . . . . . . . 16
5.7. The Selection Process Table . . . . . . . . . . . . . . . 17
5.8. The Statistical Tables . . . . . . . . . . . . . . . . . . 17
5.8.1. The Transport Session Statistical Table . . . . . . . 17
5.8.2. The Template Statistical Table . . . . . . . . . . . . 17
5.8.3. The Metering Process Statistical Table . . . . . . . . 18
5.8.4. The Selection Process Statistical Table . . . . . . . 18
6. Structure of the IPFIX SELECTOR MIB . . . . . . . . . . . . . 19
6.1. The Selector Functions . . . . . . . . . . . . . . . . . . 19
7. Relationship to Other MIB Modules . . . . . . . . . . . . . . 22
7.1. Relationship to the ENTITY MIB . . . . . . . . . . . . . . 22
7.2. MIB modules required for IMPORTS . . . . . . . . . . . . . 22
8. MIB Definitions . . . . . . . . . . . . . . . . . . . . . . . 23
8.1. IPFIX MIB Definition . . . . . . . . . . . . . . . . . . . 23
8.2. IPFIX SELECTOR MIB Definition . . . . . . . . . . . . . . 57
9. Security Considerations . . . . . . . . . . . . . . . . . . . 61
10. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 63
11. Acknowledgment . . . . . . . . . . . . . . . . . . . . . . . . 64
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 2]
Internet-Draft IPFIX MIB July 2009
12. References . . . . . . . . . . . . . . . . . . . . . . . . . . 65
12.1. Normative References . . . . . . . . . . . . . . . . . . . 65
12.2. Informative References . . . . . . . . . . . . . . . . . . 65
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 67
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 3]
Internet-Draft IPFIX MIB July 2009
1. Introduction
This document defines two MIB modules for monitoring IP Flow
Information Export (IPFIX) Devices including Exporters and
Collectors. The IPFIX MIB module defines the objects that MUST be
implemented. Since the IPFIX architecture [RFC5470] foresees the
possibility of using filtering and/or sampling functions to reduce
the data volume this document also provides the IPFIX SELECTOR MIB
module which contains the standardized Selector Functions and is
controlled by IANA. The full configuration of the IPFIX Metering
Process is out of the scope these MIB modules.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 4]
Internet-Draft IPFIX MIB July 2009
2. IPFIX Documents Overview
The IPFIX protocol provides network administrators with access to IP
Flow information. The architecture for the export of measured IP
Flow information out of an IPFIX Exporting Process to a Collecting
Process is defined in [RFC5470], per the requirements defined in
[RFC3917]. The protocol document [RFC5101] specifies how IPFIX Data
Record and Templates are carried via a congestion-aware transport
protocol from IPFIX Exporting Processes to IPFIX Collecting Process.
IPFIX has a formal description of IPFIX Information Elements, their
name, type and additional semantic information, as specified in
[RFC5102]. Finally [RFC5472] describes what type of applications can
use the IPFIX protocol and how they can use the information provided.
It furthermore shows how the IPFIX framework relates to other
architectures and frameworks.
It is assumed that Flow metering, export and collection is performed
according to the IPFIX architecture defined in [RFC5470]. The
monitored configuration parameters of the export and collection of
Flow Templates and Records is modeled according to [RFC5101]. Packet
selection and filtering methods that may be optionally used by the
IPFIX Metering Process are not considered in this MIB module. They
are defined in the Packet Sampling (PSAMP) framework [RFC5474] and
sampling techniques [RFC5475] documents. Nevertheless the basis for
defining selection and filtering methods is given with the IPFIX
SELECTOR MIB module. Since PSAMP export protocol [RFC5476] is based
on the IPFIX protocol the selection and filtering methods can be
added to the IPFIX SELECTOR MIB as needed.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 5]
Internet-Draft IPFIX MIB July 2009
3. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies MIB
modules that are compliant to the SMIv2, which is described in STD
58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC
2580 [RFC2580].
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 6]
Internet-Draft IPFIX MIB July 2009
4. Terminology
The definitions of the basic terms like IP Traffic Flow, Exporting
Process, Collecting Process, Observation Points, etc. can be found in
the IPFIX protocol document [RFC5101].
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 7]
Internet-Draft IPFIX MIB July 2009
5. Structure of the IPFIX MIB
The IPFIX MIB module consists of six main tables, the Transport
Session table, the Template table and the corresponding Template
Definition table, the Export table, the Metering Process table and
the Observation Point table. Since the IPFIX architecture [RFC5470]
foresees the possibility of using filtering and/or sampling functions
to reduce the data volume the MIB module provides the basic objects
for these functions with the Selection Process Table. The IPFIX
SELECTOR MIB module defined in the next section provides the standard
filtering and sampling functions that can be referenced in the
ipfixSelectionProcessTable.
All remaining objects contain statistical values for the different
tables contained in the MIB module.
The following subsections describe all tables in the IPFIX MIB
module.
5.1. The Transport Session Table
The Transport Session is the basis of the MIB module. The Transport
Session table (ipfixTransportSessionTable) contains all Transport
Sessions between Exporter and Collector. The table specifies the
layer 4 protocol of the Transport Session and, depending on that
protocol, further parameters for the Transport Session. In case of
UDP and TCP these are the source and destination address as well as
the source and destination port. For SCTP the table contains the
SCTP Assoc Id which is the index for the SCTP association in the SCTP
MIB [RFC3873]. The mode of operation of the device, i.e. if the
Transport Session is used for collecting or exporting is given in the
ipfixTransportSessionDeviceMode object. Further on it contains the
configured refresh parameters for Templates and Options Templates
that are used across unreliable connections as UDP. Finally a status
of the Transport Session is given in the table.
To illustrate the use of the above tables let us assume the following
scenario: We have an Exporter on IP address 192.0.2.22 and a
Collector on IP address 192.0.2.37. The Exporter uses TCP to export
Templates and Data Records. The same Exporter also exports, with
UDP, to a Collector with the IP address of 192.0.2.44. This would
lead to the following Transport Session Table on the Exporter:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 8]
Internet-Draft IPFIX MIB July 2009
ipfixTransportSessionTable (2)
|
+- ipfixTransportSessionEntry (1)
|
+- index (5) (ipfixTransportSessionIndex)
| +- ipfixTrasportSessionIndex (1) = 5
| +- ipfixTransportSessionProtocol (2) = 6 (TCP)
| +- ipfixTransportSessionSourceAddressType (3) = 1 (ipv4)
| +- ipfixTransportSessionSourceAddress (4) = 192.0.2.22
| +- ipfixTransportSessionDestinationAddressType (5) = 1 (ipv4)
| +- ipfixTransportSessionDestinationAddress (6) = 192.0.2.37
| +- ipfixTransportSessionSourcePort (7) = 7653
| +- ipfixTransportSessionDestinationPort (8) = 4739
| +- ipfixTransportSessionSctpAssocId (9) = 0
| +- ipfixTransportSessionDeviceMode (10) = exporting(1)
| +- ipfixTransportSessionTemplateRefreshTimeout (11) = 0
| +- ipfixTransportSessionOptionTemplateRefreshTimeout (12) = 0
| +- ipfixTransportSessionTemplateRefreshPacket (13) = 0
| +- ipfixTransportSessionOptionTemplateRefreshPacket (14) = 0
| +- ipfixTransportSessionStatus (15) = 2 (active)
.
.
.
+- index (11) (ipfixTransportSessionIndex)
+- ipfixTrasportSessionIndex (1) = 11
+- ipfixTransportSessionProtocol (2) = 17 (UDP)
+- ipfixTransportSessionSourceAddressType (3) = 1 (ipv4)
+- ipfixTransportSessionSourceAddress (4) = 192.0.2.22
+- ipfixTransportSessionDestinationAddressType (5) = 1 (ipv4)
+- ipfixTransportSessionDestinationAddress (6) = 192.0.2.44
+- ipfixTransportSessionSourcePort (7) = 14287
+- ipfixTransportSessionDestinationPort (8) = 4739
+- ipfixTransportSessionSctpAssocId (9) = 0
+- ipfixTransportSessionDeviceMode (10) = exporting(1)
+- ipfixTransportSessionTemplateRefreshTimeout (11) = 100
+- ipfixTransportSessionOptionTemplateRefreshTimeout (12)
| = 100
+- ipfixTransportSessionTemplateRefreshPacket (13) = 10
+- ipfixTransportSessionOptionTemplateRefreshPacket (14) = 10
+- ipfixTransportSessionStatus (15) = 2 (active)
The values in brackets are the OID numbers. The Collectors would
then have the same entry except that the index would most likely
differ and the ipfixTransportSessionDeviceMode would be
collecting(2).
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 9]
Internet-Draft IPFIX MIB July 2009
5.2. The Template Table
The Template table lists all Templates (including Options Templates)
that are sent (by an Exporter) or received (by a Collector). The
(Options) Templates are unique per Transport Session which also gives
the device mode (Exporter or Collector) and Observation Domain, thus
the table is indexed by
o the Transport Session Index (ipfixTransportSessionIndex)
o and the Observation Domain Id (ipfixTemplateObservationDomainId).
It contains the Set Id and an Access Time denoting the time when the
(Options) Template was last sent or received.
To resume the above example the Exporter may want to export a
Template and an Options Template for each Transport Session defined
above. This leads to the following Template Table defining Template
and Options Template:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 10]
Internet-Draft IPFIX MIB July 2009
ipfixTemplateTable (3)
|
+- ipfixTemplateEntry (1)
|
+- index (5) (ipfixTransportSessionIndex)
| +- index (3) (ipfixTemplateObservationDomainId)
| + index (257) (ipfixTemplateId)
| | +- ipfixTemplateObservationDomainId (1) = 3
| | +- ipfixTemplateId (2) = 257
| | +- ipfixTemplateSetId (3) = 2
| | +- ipfixTemplateAccessTime (4)
| | = 2008-7-1,12:49:11.2,+2:0
| |
| + index (264) (ipfixTemplateId)
| +- ipfixTemplateObservationDomainId (1) = 3
| +- ipfixTemplateId (2) = 264
| +- ipfixTemplateSetId (3) = 3
| +- ipfixTemplateAccessTime (4)
. = 2008-7-1,12:47:04.8,+2:0
.
.
.
+- index (11) (ipfixTransportSessionIndex)
+- index (3) (ipfixTemplateObservationDomainId)
+ index (273) (ipfixTemplateId)
| +- ipfixTemplateObservationDomainId (1) = 3
| +- ipfixTemplateId (2) = 273
| +- ipfixTemplateSetId (3) = 2
| +- ipfixTemplateAccessTime (4)
| = 2008-7-1,12:49:11.2,+2:0
|
+ index (289) (ipfixTemplateId)
+- ipfixTemplateObservationDomainId (1) = 3
+- ipfixTemplateId (2) = 289
+- ipfixTemplateSetId (3) = 3
+- ipfixTemplateAccessTime (4)
= 2008-7-1,12:47:04.8,+2:0
We assume that the Transport Session that is stored with index 5 in
the Transport Session table of the Exporter is stored with index 17
in the Transport Session table of the (corresponding) Collector.
Then, the Template table would look as follows:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 11]
Internet-Draft IPFIX MIB July 2009
ipfixTemplateTable (3)
|
+- ipfixTemplateEntry (1)
|
+- index (17) (ipfixTransportSessionIndex)
+- index (3) (ipfixTemplateObservationDomainId)
+ index (257) (ipfixTemplateId)
| +- ipfixTemplateObservationDomainId (1) = 3
| +- ipfixTemplateId (2) = 257
| +- ipfixTemplateSetId (3) = 2
| +- ipfixTemplateAccessTime (4)
| = 2008-7-1,12:49:11.8,+2:0
|
+ index (264) (ipfixTemplateId)
+- ipfixTemplateObservationDomainId (1) = 3
+- ipfixTemplateId (2) = 264
+- ipfixTemplateSetId (3) = 3
+- ipfixTemplateAccessTime (4)
= 2008-7-1,12:47:05.3,+2:0
The table on the second Collector would be analog to the one shown
above.
5.3. The Template Definition Table
The Template Definition table lists all the Information Elements
contained in a Template or Options Template. Therefore it has the
same indexes as the corresponding Template table plus the Template
Id. Its own index denotes the order of the Information Element
inside the Template if necessary. Besides the Information Element Id
and the length of the encoded value the table contains the enterprise
number for enterprise specific Information Elements and flags for
each Information Element. The flags indicate if the Information
Element is used for scoping or as a Flow key.
To resume the above example again the Exporter is configured to
export the octets received and dropped at the Observation Point since
the last export of these values. In addition it exports the start
and end time of the flow relative to the timestamp contained in the
IPFIX header. This leads to the following Template Definition table
on the Exporter:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 12]
Internet-Draft IPFIX MIB July 2009
ipfixTemplateDefinitionTable (4)
|
+- ipfixTemplateDefinitionEntry (1)
|
+- index (5) (ipfixTransportSessionIndex)
+- index (3) (ipfixTemplateObservationDomainId)
+ index (257) (ipfixTemplateId)
+- index (1) (ipfixTemplateDefinitionIndex)
| +- ipfixTemplateDefinitionIndex (1) = 1
| +- ipfixTemplateDefinitionIeId (2) = 158
| | (flowStartDeltaMicroseconds)
| +- ipfixTemplateDefinitionIeLength (3) = 4
| +- ipfixTemplateDefinitionEnterprise (4) = 0
| +- ipfixTemplateDefinitionFlags (5) = 0
|
+- index (2) (ipfixTemplateDefinitionIndex)
| +- ipfixTemplateDefinitionIndex (1) = 2
| +- ipfixTemplateDefinitionIeId (2) = 159
| | (flowStartDeltaMicroseconds)
| +- ipfixTemplateDefinitionIeLength (3) = 4
| +- ipfixTemplateDefinitionEnterprise (4) = 0
| +- ipfixTemplateDefinitionFlags (5) = 0
|
+- index (3) (ipfixTemplateDefinitionIndex)
| +- ipfixTemplateDefinitionIndex (1) = 3
| +- ipfixTemplateDefinitionIeId (2) = 1
| | (octetDeltaCount)
| +- ipfixTemplateDefinitionIeLength (3) = 8
| +- ipfixTemplateDefinitionEnterprise (4) = 0
| +- ipfixTemplateDefinitionFlags (5) = 0
|
+- index (4) (ipfixTemplateDefinitionIndex)
+- ipfixTemplateDefinitionIndex (1) = 4
+- ipfixTemplateDefinitionIeId (2) = 132
| (droppedOctetDeltaCount)
+- ipfixTemplateDefinitionIeLength (3) = 8
+- ipfixTemplateDefinitionEnterprise (5) = 0
+- ipfixTemplateDefinitionFlags (4) = 0
The corresponding table entry on the collector is the same except
that it would have another ipfixTransportSessionIndex, e.g. 17 to as
in the previous example.
5.4. The Export Table
On Exporters, the Export table (ipfixExportTable) can be used to
support features like failover, load-balancing, duplicate export to
several Collectors etc. The table has 5 indexes that link an entry
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 13]
Internet-Draft IPFIX MIB July 2009
with
o the Metering Process table (ipfixMeteringProcessCacheId, see
below),
o the Exported Template table (ipfixTemplateObservationDomainId and
ipfixTemplateId)
o and the Transport Session table (ipfixTransportSessionIndex).
Those entries with the same ipfixExportIndex, the same
ipfixMeteringProcessCacheId and the same
ipfixTemplateObservationDomainId define a Transport Session group.
The member type for each group member describes its functionality.
All Transport Sessions referenced in this table MUST have the
ipfixTransportSessionDeviceMode exporting(1).
If the Exporter does not use Transport Session grouping then each
ipfixExportIndex contains a single ipfixMeteringProcessCacheId and
thus a singe Transport Session (ipfixTransportSessionIndex) and this
session MUST have the member type primary(1).
For failover a Transport Session group can contain one Transport
Session with member type "primary" and several Transport Sessions
with type secondary(2). Entries with other member types are not
allowed for that type of group. For load-balancing or parallel
export all Transport Sessions in the group MUST have the same member
type either loadBalancing(4) or parallel(3).
The algorithms used for failover or load-balancing are out of the
scope of this document.
To continue the example we assume that the Exporter uses the two
connections shown in the examples above as the primary export for a
session protected by a secondary backup connection. The Exporter
then has the following entries in the ipfixExportTable:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 14]
Internet-Draft IPFIX MIB July 2009
ipfixExportTable (5)
|
+- ipfixExportEntry (1)
|
+- index (7) (ipfixExportIndex)
| +- index (9) (ipfixMeteringProcessCacheId)
| +- index (3) (ipfixObservationDomainId)
| +- index (257) (ipfixTemplateId)
| | +- index (5) (ipfixTransportSessionIndex)
| | +- ipfixExportIndex (1) = 7
| | +- ipfixExportMemberType (2) = 1 (primary)
| |
| +- index (273) (ipfixTemplateId)
| +- index (11) (ipfixTransportSessionIndex)
| +- ipfixExportIndex (1) = 7
| +- ipfixExportMemberType (2) = 2 (secondary)
|
+- index (8) (ipfixExportIndex)
+- index (9) (ipfixMeteringProcessCacheId)
+- index (3) (ipfixObservationDomainId)
+- index (264) (ipfixTemplateId)
| +- index (5) (ipfixTransportSessionIndex)
| +- ipfixExportIndex (1) = 8
| +- ipfixExportMemberType (2) = 2 (secondary)
+- index (289) (ipfixTemplateId)
+- index (11) (ipfixTransportSessionIndex)
+- ipfixExportIndex (1) = 8
+- ipfixExportMemberType (2) = 1 (primary)
The example shows that the Exporter uses the Metering Cache 9
explained below to export IPFIX Records for the Templates 257, 273,
264 and 289. Templates 257 and 264 are exported within Transport
Session 5 and Templates 273 and 289 are exported within Transport
Session 11. If we assume that Templates 257 and 264 are identical
then the Collector that receives Transport Session 11 is a backup for
the Collector of Transport Session 5.
5.5. The Metering Process Table
The Metering Process as defined in [RFC5101] consists of a set of
functions. Maintaining the Flow Records is one of them. This
function is responsible for passing the Flow Records to the Exporting
Process and also for detecting Flow expiration. The Flow Records
that are maintained by the Metering Process can be grouped by the
Observation Points they are observed at. The instance that maintains
such a group of Flow Records is a kind of cache. For this reason the
Metering Process table (ipfixMeteringProcessTable) is indexed by
cache IDs (ipfixMeteringProcessCacheId). Each cache can be
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 15]
Internet-Draft IPFIX MIB July 2009
maintained by a separate instance of the Metering Process. To
specify the Observation Point(s) where the Flow Records are gathered
the ipfixMeteringProcessObservationPointGroupRef may contain an
ipfixObservationPointGroupId from the Observation Point table
(ipfixObservationPointTable) described in the next section. If an
Observation Point is not specified for the Flow Records the
ipfixMeteringProcessObservationPointGroupRef MUST be zero(0). The
timeouts (ipfixMeteringProcessCacheActiveTimeout and
ipfixMeteringProcessCacheInactiveTimeout) specify when Flow Records
are passed to the Exporting Process.
ipfixMeteringProcessTable(6)
|
+- ipfixMeteringProcessEntry(1)
|
+- index(9) (ipfixMeteringProcessCacheId)
+- ipfixMeteringProcessCacheId(1) = 9
+- ipfixMeteringProcessObservationPointGroupRef(2) = 17
+- ipfixMeteringProcessCacheActiveTimeout(3) = 100
+- ipfixMeteringProcessCacheInactiveTimeout(4) = 100
5.6. The Observation Point Table
The Observation Point Table (ipfixObservationPointTable) groups
Observation Points with the ipfixObservationPointGroupId. Each entry
contains a reference to the ENTITY MIB [RFC4133]. The objects in the
ENTITY MIB denote the Observation Point. In addition a direction can
be given to render more specific which Flow to monitor.
ipfixObservationPointTable(7)
|
+- ipfixObservationPointEntry(1)
|
+- index(17) (ipfixObservationPointGroupId)
+- index(1) (ipfixObservationPointIndex)
| +- ipfixObservationPointGroupId(1) = 17
| +- ipfixObservationPointIndex(2) = 1
| +- ipfixObservationPointPhysicalEntity(3) = 6
| +- ipfixObservationPointPhysicalEntityDirection(4)
= 3 (both)
|
+- index(2) (ipfixObservationPointIndex)
+- ipfixObservationPointGroupId(1) = 17
+- ipfixObservationPointIndex(2) = 2
+- ipfixObservationPointPhysicalEntity(3) = 0
+- ipfixObservationPointPhysicalEntityDirection(4)
= 1 (ingress)
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 16]
Internet-Draft IPFIX MIB July 2009
5.7. The Selection Process Table
This table supports the usage of filtering and sampling functions as
described in [RFC5470]. The implementation and use of this table is
optional. If implemented it contains lists of functions per Metering
Process cache (ipfixMeteringProcessCacheId). The Selection Process
Index ipfixSelectionProcessIndex forms groups of Selector Functions
that are applied to an observed packet stream. The Selection Process
Selector Index (ipfixSelectionProcessSelectorIndex) indicates the
order within an Selector Process in which the functions are applied
to the packets observed at the Observation Points associated with the
Metering Process cache. The Selector Functions are applied in
increasing order i.e., Selector Functions with a lower
ipfixSelectionProcessSelectorIndex are applied first. The functions
are referred by object identifiers pointing to the function with its
parameters. If the Selector Function does take no parameters then it
MUST point to the root of the function subtree (see also Section
Section 6). If the function takes parameters then it MUST point to
an entry in the parameter table of the Selector Function. If the
table is implemented and no filtering or sampling is used for a
Template then an entry for the Template should be created pointing to
the Select All function (ipfixFuncSelectAll).
5.8. The Statistical Tables
For the ipfixTransportSessionTable, the ipfixTemplateTable, the
ipfixMeteringProcessTable and the ipfixSelectionProcessTable
statistical tables are defined that augment those tables. All the
statistical tables contain a discontinuity object that hold a
timestamp that denotes the time when a discontinuity event occurred
to notify the management system that the counters contained in those
tables might not be continuous anymore.
5.8.1. The Transport Session Statistical Table
The Transport Session Statistical Table
(ipfixTransportSessionStatsTable) augments the
ipfixTransportSessionTable with statistical values. It contains the
rate (in bytes per second) with which it receives or sends out IPFIX
Messages, the number of bytes, packets, messages, Records, Templates
and Options Templates received or sent and the number of messages
that were discarded.
5.8.2. The Template Statistical Table
This table contains a statistical value for each Template. It
augments the Template Table (ipfixTemplateTable) and specifies the
number of Data Records exported or collected for the Template.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 17]
Internet-Draft IPFIX MIB July 2009
5.8.3. The Metering Process Statistical Table
This table augments the Metering Process Table
(ipfixMeteringProcessTable). It contains the statistical values for
the IPFIX Messages and Data Records exported, the number of errors
that occurred in the Metering Process and the number of active and
inactive flows that are currently observed.
5.8.4. The Selection Process Statistical Table
This table augments the Selection Process Table
(ipfixSelectionProcessTable) and introduces two generic statistical
values, the number of packets observed and the number of packets
dropped by the selector function.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 18]
Internet-Draft IPFIX MIB July 2009
6. Structure of the IPFIX SELECTOR MIB
The IPFIX SELECTOR MIB module defined in this section provides the
standard filtering and sampling functions that can be referenced in
the ipfixSelectionProcessTable. The subtree ipfixSelectorFunctions
is a placeholder where all standard filtering and sampling functions
should be located. It currently contains the Select All functions
(ipfixFuncSelectAll). The IPFIX SELECTOR MIB module is maintained by
IANA and can be extended through Expert Review [RFC5226], i.e.,
review by one of a group of experts designated by an IETF Area
Director. The group of experts MUST check the requested MIB objects
for completeness and accuracy of the description. Requests for MIB
objects that duplicate the functionality of existing objects SHOULD
be declined. The smallest available OID SHOULD be assigned to a new
MIB objects. The specification of new MIB objects SHOULD follow the
structure specified in the next Section and MUST be published using a
well-established and persistent publication medium. The experts will
initially be drawn from the Working Group Chairs and document editors
of the IPFIX and PSAMP Working Groups.
6.1. The Selector Functions
The following figure shows how the MIB tree usually should look like.
It already contains the ipfixFuncSelectAll. The subtree in
ipfixFuncF2 gives the basic structure which all Selector Functions
SHOULD follow.
ipfixSelectorFunctions
|
+- ipfixFuncSelectAll
| |
| +- ipfixFuncSelectAllAvail (is the function available?)
|
+- ipfixFuncF2
| |
| +- ipfixFuncF2Avail (is the function F2 available)
| |
| +- ipfixFuncF2Parameters (a table with parameters)
...
|
+- ipfixFunFn...
The Selector function SHOULD be designed as a MIB subtree introduced
by an object with the name ipfixFunc appended by a function name.
The objects in this subtree SHOULD be prefixed by this name. If the
function is named Fx then we would start a subtree with an OID named
ipfixFuncFx. This subtree should contain an object ipfixFuncFxAvail
which has the type TruthValue. If a Selector Function takes
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 19]
Internet-Draft IPFIX MIB July 2009
parameters the MIB should contain a table named ipfixFuncFxParameters
which should contain all the parameters that the Selector function
specifies. An entry in this table will be referenced by the IPFIX
MIB if the Selector function with the parameters is used.
To illustrate the structure defined above the following contains an
example of a Function MyFunc that hold 3 integer parameters Param1,
Param2 and Param3. In the example there are currently 2 instances of
the parameters set defined with indexes 1 and 4.
ipfixSelectorFunctions(1)
|
+- ipfixFuncMyFunc(?)
|
+- ipfixFuncMyFuncAvail(1) = true
+- ipfixFuncMyFuncParameters(2)
|
+- ipfixFuncMyFuncParametersEntry(1)
|
+- index(1) (ipfixFuncMyFuncParametersIndex)
| +- ipfixFuncMyFuncParam1(1) = 47
| +- ipfixFuncMyFuncParam2(2) = -128
| +- ipficFuncMyFuncParam3(3) = 19
|
+- index(4) (ipfixFuncMyFuncParametersIndex)
+- ipfixFuncMyFuncParam1(1) = 19
+- ipfixFuncMyFuncParam2(2) = -1
+- ipficFuncMyFuncParam3(3) = 728
If the function defined above is referenced in the IPFIX MIB the
ipfixSelectionProcessTable would look as follows:
ipfixSelectionProcessTable(8)
|
+- ipfixSelectionProcessEntry(1)
|
+- index(9) (ipfixMeteringProcessCacheId)
+- index(1) (ipfixSelectionProcessIndex)
+- index(1) (ipfixSelectionProcessSelectorIndex)
| +- ipfixSelectionProcessSelectorFunction(3)
| = ipfixSelectorFunctions.?.2.1.4
+- index(2) (ipfixSelectionProcessSelectorIndex)
+- ipfixSelectionProcessSelectorFunction(3)
= ipfixSelectorFunctions.?.2.1.1
This means that for the ipfixMeteringProcessCacheId(9) a Selection
Process with index 1 is created that applies two times the same
function but with different parameter sets. First the function
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 20]
Internet-Draft IPFIX MIB July 2009
MyFunc is applied with the parameters of the set with index 4 and the
with the parameters of the set with index 1.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 21]
Internet-Draft IPFIX MIB July 2009
7. Relationship to Other MIB Modules
Besides the usual imports from the SNMP Standards [RFC2578],
[RFC2579] and [RFC2580] the IPFIX MIB references the ENTITY MIB
[RFC4133].
7.1. Relationship to the ENTITY MIB
The Observation Point table (ipfixObservationPointTable) contains a
reference to the ENTITY MIB[RFC4133]
(ipfixObservationPointPhysicalEntity). If the implementors of the
IPFIX MIB want to specify the physical entity where Flows are
observed (if that is possible at all) then they SHOULD also implement
the ENTITY MIB. The implementation of the ENTITY MIB is optional.
If it is not implemented then all values of the
ipfixObservationPointPhysicalEntity columns in the Observation Point
table are zero and the values of the
ipfixObservationPointPhysicalEntityDirection columns are unknown(0).
7.2. MIB modules required for IMPORTS
The IPFIX MIB requires the modules SNMPv2-SMI[RFC2578], SNMPv2-
TC[RFC2579] and SNMPv2-CONF[RFC2580]. Further on it imports the
textual conventions InetAddressType and InetAddress from the INET
ADDRESS MIB[RFC4001].
The IPFIX SELECTOR MIB also requires the modules SNMPv2-SMI[RFC2578],
SNMPv2-TC[RFC2579] and SNMPv2-CONF[RFC2580].
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 22]
Internet-Draft IPFIX MIB July 2009
8. MIB Definitions
This section contains the definitions of the IPFIX-MIB module and the
IPFIX-SELECTOR-MIB module. There are different mandatory groups
defined for Collector and Exporter implementations. The statistical
objects are made optional.
8.1. IPFIX MIB Definition
IPFIX-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2, Unsigned32, Counter64,
Gauge32
FROM SNMPv2-SMI -- RFC2578
TimeStamp, DateAndTime
FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF -- RFC2580
InetAddressType, InetAddress, InetPortNumber
FROM INET-ADDRESS-MIB -- RFC4001
PhysicalIndexOrZero
FROM ENTITY-MIB; -- RFC4133
ipfixMIB MODULE-IDENTITY
LAST-UPDATED "200907090900Z" -- 09 July 2009
ORGANIZATION "IETF IPFIX Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/ipfix-charter.html
Mailing Lists:
General Discussion: ipfix@ietf.org
To Subscribe: http://www1.ietf.org/mailman/listinfo/ipfix
Archive:
http://www1.ietf.org/mail-archive/web/ipfix/current/index.html
Editor:
Thomas Dietz
NEC Europe Ltd.
NEC Laboratories Europe
Network Research Division
Kurfuersten-Anlage 36
69115 Heidelberg
Germany
Phone: +49 6221 4342-128
Email: Thomas.Dietz@nw.neclab.eu
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 23]
Internet-Draft IPFIX MIB July 2009
Atsushi Kobayashi
NTT Information Sharing Platform Laboratories
3-9-11 Midori-cho
Musashino-shi
180-8585
Japan
Phone: +81-422-59-3978
Email: akoba@nttv6.net
Benoit Claise
Cisco Systems, Inc.
De Kleetlaan 6a b1
Degem 1831
Belgium
Phone: +32 2 704 5622
Email: bclaise@cisco.com"
DESCRIPTION
"The IPFIX MIB defines managed objects for IP Flow
Information eXport. These objects provide information about
managed nodes supporting the IP Flow Information Export
protocol, for Exporters as well as for Collectors.
Copyright (c) 2009 IETF Trust and the persons identified as
the document authors. All rights reserved. This version
of this MIB module is part of RFC yyyy; see the RFC itself
for full legal notices."
-- replace yyyy with actual RFC number & remove this notice
-- Revision history
REVISION "200907090900Z" -- 09 July 2009
DESCRIPTION
"Initial version, published as RFC yyyy."
-- replace yyyy with actual RFC number & remove this notice
::= { mib-2 xxx }
-- xxx to be assigned by IANA.
--******************************************************************
-- Top Level Structure of the MIB
--******************************************************************
ipfixObjects OBJECT IDENTIFIER ::= { ipfixMIB 1 }
ipfixConformance OBJECT IDENTIFIER ::= { ipfixMIB 2 }
ipfixMainObjects OBJECT IDENTIFIER ::= { ipfixObjects 1 }
ipfixStatistics OBJECT IDENTIFIER ::= { ipfixObjects 2 }
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 24]
Internet-Draft IPFIX MIB July 2009
--==================================================================
-- 1.1: Objects used by all IPFIX implementations
--==================================================================
--------------------------------------------------------------------
-- 1.1.1: Exporter Version
--------------------------------------------------------------------
ipfixExportVersion OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Exporters the object contains the version number of the
IPFIX Protocol that the Exporter uses to export its data.
On Collectors the object contains the highest version
number of all IPFIX Protocols understood by the Collector."
REFERENCE
"[RFC5101] Section 3.1 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information"
::= { ipfixMainObjects 1 }
--------------------------------------------------------------------
-- 1.1.2: Transport Session Table
--------------------------------------------------------------------
ipfixTransportSessionTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixTransportSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the currently established Transport
Sessions between an Exporting Process and a Collecting
Process."
::= { ipfixMainObjects 2 }
ipfixTransportSessionEntry OBJECT-TYPE
SYNTAX IpfixTransportSessionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixTransportSessionTable"
INDEX { ipfixTransportSessionIndex }
::= { ipfixTransportSessionTable 1 }
IpfixTransportSessionEntry ::=
SEQUENCE {
ipfixTransportSessionIndex Unsigned32,
ipfixTransportSessionProtocol Unsigned32,
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 25]
Internet-Draft IPFIX MIB July 2009
ipfixTransportSessionSourceAddressType InetAddressType,
ipfixTransportSessionSourceAddress InetAddress,
ipfixTransportSessionDestinationAddressType InetAddressType,
ipfixTransportSessionDestinationAddress InetAddress,
ipfixTransportSessionSourcePort InetPortNumber,
ipfixTransportSessionDestinationPort InetPortNumber,
ipfixTransportSessionSctpAssocId Unsigned32,
ipfixTransportSessionDeviceMode INTEGER,
ipfixTransportSessionTemplateRefreshTimeout Unsigned32,
ipfixTransportSessionOptionsTemplateRefreshTimeout Unsigned32,
ipfixTransportSessionTemplateRefreshPacket Unsigned32,
ipfixTransportSessionOptionsTemplateRefreshPacket Unsigned32,
ipfixTransportSessionStatus INTEGER
}
ipfixTransportSessionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in
the ipfixTransportSessionTable. The value is expected to
remain constant from a re-initialization of the entity's
network management agent to the next re-initialization."
::= { ipfixTransportSessionEntry 1 }
ipfixTransportSessionProtocol OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol used for receiving or transmitting
IPFIX Messages. Protocol numbers are assigned by IANA. A
current list of all assignments is available from
."
REFERENCE
"[RFC5101] Section 10 - Specification of the IP Flow
Information Export(IPFIX) Protocol for the Exchange of IP
Traffic Flow Information"
::= { ipfixTransportSessionEntry 2 }
ipfixTransportSessionSourceAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address used for the source address
as specified in RFC4001. This object is used with protocols
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 26]
Internet-Draft IPFIX MIB July 2009
(specified in ipfixTransportSessionProtocol) like TCP(6)
and UDP(17) that have the notion of addresses. SCTP(132)
should use the ipfixTransportSessionSctpAssocId instead.
If SCTP(132) or any other protocol without the notion of
addresses is used the object MUST be set to unknown(0)."
::= { ipfixTransportSessionEntry 3 }
ipfixTransportSessionSourceAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The source address of the Exporter of the IPFIX Transport
Session. This value is interpreted according to the value of
ipfixTransportSessionAddressType as specified in RFC4001.
This object is used with protocols (specified in
ipfixTransportSessionProtocol) like TCP(6) and UDP(17) that
have the notion of addresses. SCTP(132) should use the
ipfixTransportSessionSctpAssocId instead. If SCTP(132) or
any other protocol without the notion of addresses is used
the object MUST be set to a zero-length string."
::= { ipfixTransportSessionEntry 4 }
ipfixTransportSessionDestinationAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of address used for the destination address
as specified in RFC4001. This object is used with protocols
(specified in ipfixTransportSessionProtocol) like TCP(6)
and UDP(17) that have the notion of addresses. SCTP(132)
should use the ipfixTransportSessionSctpAssocId instead.
If SCTP(132) or any other protocol without the notion of
addresses is used the object MUST be set to unknown(0)."
::= { ipfixTransportSessionEntry 5 }
ipfixTransportSessionDestinationAddress OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The destination address of the Collector of the IPFIX
Transport Session. This value is interpreted according to
the value of ipfixTransportSessionAddressType as specified
in RFC4001. This object is used with protocols
(specified in ipfixTransportSessionProtocol) like TCP(6)
and UDP(17) that have the notion of addresses. SCTP(132)
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 27]
Internet-Draft IPFIX MIB July 2009
should use the ipfixTransportSessionSctpAssocId instead.
If SCTP(132) or any other protocol without the notion of
addresses is used the object MUST be set to a zero-length
string"
::= { ipfixTransportSessionEntry 6 }
ipfixTransportSessionSourcePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol port number of the Exporter.
This object is used with protocols (specified in
ipfixTransportSessionProtocol) like TCP(6)
and UDP(17) that have the notion of ports. SCTP(132)
should use the ipfixTransportSessionSctpAssocId instead.
If SCTP(132) or any other protocol without the notion of
ports is used the object MUST be set to zero."
::= { ipfixTransportSessionEntry 7 }
ipfixTransportSessionDestinationPort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transport protocol port number of the Collector. The
default value is 4739 for all currently defined transport
protocol types. This object is used with protocols
(specified in ipfixTransportSessionProtocol) like TCP(6)
and UDP(17) that have the notion of ports. SCTP(132)
should use the ipfixTransportSessionSctpAssocId instead.
If SCTP(132) or any other protocol without the notion of
ports is used the object MUST be set to zero."
::= { ipfixTransportSessionEntry 8 }
ipfixTransportSessionSctpAssocId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The association id used for the SCTP session between the
Exporter and the Collector of the IPFIX Transport Session.
It is equal to the sctpAssocIdentry in the sctpAssocTable
defined in the SCTP MIB. This object is only valid if
ipfixTransportSessionProtocol has the value 132 (SCTP). In
all other cases the value MUST be zero."
REFERENCE
"[RFC3871] - Stream Control Transmission Protocol (SCTP)
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 28]
Internet-Draft IPFIX MIB July 2009
Management Information Base (MIB)"
::= { ipfixTransportSessionEntry 9 }
ipfixTransportSessionDeviceMode OBJECT-TYPE
SYNTAX INTEGER {
exporting(1),
collecting(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The mode of operation of the device for the given Transport
Session. This object can have the following values:
exporting(1)
This value MUST be used if the Transport Session is
used for exporting Records to other IPFIX Devices,
i.e. this device acts as Exporter.
collecting(2)
This value MUST be used if the Transport Session is
used for collecting Records from other IPFIX Devices,
i.e. this device acts as Collector."
::= { ipfixTransportSessionEntry 10 }
ipfixTransportSessionTemplateRefreshTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Exporters this object contains the time in seconds
after which IPFIX Templates MUST be resent by the
Exporter.
On Collectors this object contains the lifetime in seconds
after which a Template becomes invalid when it is not
received again within this lifetime.
This object is only valid if ipfixTransportSessionProtocol
has the value 17 (UDP). In all other cases the value MUST
be zero."
REFERENCE
"[RFC5101] Sections 10.3.6 and 10.3.7 - Specification of
the IP Flow Information Export(IPFIX) Protocol for the
Exchange of IP Traffic Flow Information"
::= { ipfixTransportSessionEntry 11 }
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 29]
Internet-Draft IPFIX MIB July 2009
ipfixTransportSessionOptionsTemplateRefreshTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Exporters this object contains the time in seconds
after which IPFIX Options Templates MUST be resent by the
Exporter.
On Collectors this object contains the lifetime in seconds
after which an Options Template becomes invalid when it is
not received again within this lifetime.
This object is only valid if ipfixTransportSessionProtocol
has the value 17 (UDP). In all other cases the value MUST
be zero."
REFERENCE
"[RFC5101] Sections 10.3.6 and 10.3.7 - Specification of
the IP Flow Information Export(IPFIX) Protocol for the
Exchange of IP Traffic Flow Information"
::= { ipfixTransportSessionEntry 12 }
ipfixTransportSessionTemplateRefreshPacket OBJECT-TYPE
SYNTAX Unsigned32
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Exporters this object contains the number of exported
IPFIX Messages after which IPFIX Templates MUST be resent
by the Exporter.
On Collectors this object contains the lifetime in number
of exported IPFIX Messages after which a Template becomes
invalid when it is not received again within this lifetime.
This object is only valid if ipfixTransportSessionProtocol
has the value 17 (UDP). In all other cases the value MUST
be zero."
REFERENCE
"[RFC5101] Sections 10.3.6 and 10.3.7 - Specification of
the IP Flow Information Export(IPFIX) Protocol for the
Exchange of IP Traffic Flow Information"
::= { ipfixTransportSessionEntry 13 }
ipfixTransportSessionOptionsTemplateRefreshPacket OBJECT-TYPE
SYNTAX Unsigned32
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 30]
Internet-Draft IPFIX MIB July 2009
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"On Exporters this object contains the number of exported
IPFIX Messages after which IPFIX Options Templates MUST be
resent by the Exporter.
On Collectors this object contains the lifetime in number
of exported IPFIX Messages after which an Options Template
becomes invalid when it is not received again within this
lifetime.
This object is only valid if ipfixTransportSessionProtocol
has the value 17 (UDP). In all other cases the value MUST
be zero."
REFERENCE
"[RFC5101] Sections 10.3.6 and 10.3.7 - Specification of
the IP Flow Information Export(IPFIX) Protocol for the
Exchange of IP Traffic Flow Information"
::= { ipfixTransportSessionEntry 14 }
ipfixTransportSessionStatus OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
inactive(1),
active(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The status of a Transport Session. This object can have the
following values:
unknown(0)
This value MUST be used if the status of the
connection cannot be detected by the equipment. This
value should be avoided as far as possible.
inactive(1)
This value MUST be used for Transport Sessions that
are specified in the system but not currently connected.
The value can be used e.g. for Transport Sessions that
are backup (secondary) sessions in a Transport Session
group.
active(2)
This value MUST be used for Transport Sessions that are
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 31]
Internet-Draft IPFIX MIB July 2009
currently connected and transmitting or receiving data."
::= { ipfixTransportSessionEntry 15 }
--------------------------------------------------------------------
-- 1.1.3: Template Table
--------------------------------------------------------------------
ipfixTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Templates and Options Templates that
are transmitted by the Exporting Process or received by the
Collecting Process.
The table contains the Templates and Options Templates that
are received or used for exporting data for a given
Transport Session group and Observation Domain.
When an (Options) Template is no longer valid because
the Exporter failed to retransmit it (see
ipfixTemplateAccessTime)it MUST be removed from this table."
::= { ipfixMainObjects 3 }
ipfixTemplateEntry OBJECT-TYPE
SYNTAX IpfixTemplateEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixTemplateTable"
INDEX {
ipfixTransportSessionIndex,
ipfixTemplateObservationDomainId,
ipfixTemplateId
}
::= { ipfixTemplateTable 1 }
IpfixTemplateEntry ::=
SEQUENCE {
ipfixTemplateObservationDomainId Unsigned32,
ipfixTemplateId Unsigned32,
ipfixTemplateSetId Unsigned32,
ipfixTemplateAccessTime DateAndTime
}
ipfixTemplateObservationDomainId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 32]
Internet-Draft IPFIX MIB July 2009
STATUS current
DESCRIPTION
"The ID of the Observation Domain to which the Observation
Points of this group belong to. This value is used when
sending IPFIX Messages.
The special value of 0 indicates that the Observation Points
in this group cannot be applied to a single Observation
Domain."
REFERENCE
"[RFC5101] Section 3.1 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information"
::= { ipfixTemplateEntry 1 }
ipfixTemplateId OBJECT-TYPE
SYNTAX Unsigned32 (256..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This number indicates the Template Id in the IPFIX
message. Values from 0 to 255 are not allowed for Template
Ids."
REFERENCE
"[RFC5101] Section 3.4.1 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information"
::= { ipfixTemplateEntry 2 }
ipfixTemplateSetId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This number indicates the set id of the Template. This
object allows to easily retrieve the Template type.
Currently there are two values defined. The value 2 is
used for Sets containing Template definitions. The value 3
is used for Sets containing Options Template definitions. A
value greater than 255 is used for Sets containing Data
Records for the (Options) Template Id given by the Set Id."
REFERENCE
"[RFC5101] Section 3.3.2 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information"
::= { ipfixTemplateEntry 3 }
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 33]
Internet-Draft IPFIX MIB July 2009
ipfixTemplateAccessTime OBJECT-TYPE
SYNTAX DateAndTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the Transport Session is in exporting mode
(ipfixTransportSessionDeviceMode) the time when this
(Options) Template was last sent to the Collector(s). This
time is used if the transport protocol is UDP to know when
a retransmission of the (Options) Template is needed.
If it is in collecting mode it this object contains the time
when this (Options) Template was last received from the
Exporter. This time is used if the transport protocol is UDP
to know when this (Options) Template times out and thus is no
longer valid."
::= { ipfixTemplateEntry 4 }
--------------------------------------------------------------------
-- 1.1.4: Exported Template Definition Table
--------------------------------------------------------------------
ipfixTemplateDefinitionTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixTemplateDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"On Exporters this table lists the (Options) Template Fields
of which a (Options) Template is defined. It defines the
(Options) Template given in the ipfixTemplateId specified in
the ipfixTemplateTable.
On Collectors this table lists the (Options) Template Fields
of which a (Options) Template is defined. It defines the
(Options) Template given in the ipfixTemplateId specified in
the ipfixTemplateTable."
::= { ipfixMainObjects 4 }
ipfixTemplateDefinitionEntry OBJECT-TYPE
SYNTAX IpfixTemplateDefinitionEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixTemplateDefinitionTable"
INDEX {
ipfixTransportSessionIndex,
ipfixTemplateObservationDomainId,
ipfixTemplateId,
ipfixTemplateDefinitionIndex
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 34]
Internet-Draft IPFIX MIB July 2009
}
::= { ipfixTemplateDefinitionTable 1 }
IpfixTemplateDefinitionEntry ::=
SEQUENCE {
ipfixTemplateDefinitionIndex Unsigned32,
ipfixTemplateDefinitionIeId Unsigned32,
ipfixTemplateDefinitionIeLength Unsigned32,
ipfixTemplateDefinitionEnterprise Unsigned32,
ipfixTemplateDefinitionFlags BITS
}
ipfixTemplateDefinitionIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The ipfixTemplateDefinitionIndex specifies the order in
which the Information Elements are used in the (Options)
Template Record.
Since a IPFIX Message can contain a maximum of 65535
Information Elements the index is limited to this value."
REFERENCE
"[RFC5101] Section 3.4.1 and 3.4.2 - Specification of the
IP Flow Information Export (IPFIX) Protocol for the
Exchange of IP Traffic Flow Information"
::= { ipfixTemplateDefinitionEntry 1 }
ipfixTemplateDefinitionIeId OBJECT-TYPE
SYNTAX Unsigned32 (1..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the Information Element Id at position
ipfixTemplateDefinitionIndex in the (Options) Template
ipfixTemplateId. This implicitly specifies the data type
of the Information Element. The elements are registered
at IANA. A current list of assignments can be found at
"
REFERENCE
"[RFC5101] Section 3.2 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information
[RFC5102] - Information Model for IP Flow Information Export"
::= { ipfixTemplateDefinitionEntry 2 }
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 35]
Internet-Draft IPFIX MIB July 2009
ipfixTemplateDefinitionIeLength OBJECT-TYPE
SYNTAX Unsigned32 (0..65535)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This indicates the length of the Information Element Id at
position ipfixTemplateDefinitionIndex in the (Options)
Template ipfixTemplateId."
REFERENCE
"[RFC5101] Section 3.2 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information
[RFC5102] - Information Model for IP Flow Information Export"
::= { ipfixTemplateDefinitionEntry 3 }
ipfixTemplateDefinitionEnterprise OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"IANA enterprise number of the authority defining the
Information Element identifier in this Template Record.
Enterprise numbers are assigned by IANA. A current list of
all assignments is available from
."
REFERENCE
"[RFC5101] Section 3.2 - Specification of the IP Flow
Information Export (IPFIX) Protocol for the Exchange of IP
Traffic Flow Information
[RFC5102] - Information Model for IP Flow Information Export"
::= { ipfixTemplateDefinitionEntry 4 }
ipfixTemplateDefinitionFlags OBJECT-TYPE
SYNTAX BITS {
scope(0),
flowKey(1)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This bitmask indicates special attributes for the
Information Element:
scope(0)
This Information Element is used for scope.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 36]
Internet-Draft IPFIX MIB July 2009
flowKey(1)
This Information Element is a Flow key.
Thus we get the following values for an Information Element:
'0'H
The Information Element is neither used for scoping nor
as Flow Key.
'1'H (scope)
The Information Element is used for scoping.
'2'H (flowKey)
The Information Element is used as Flow Key.
'3'H (scope | flowKey)
This combination is not allowed."
REFERENCE
"[RFC5101] Section 2 and 3.4.2.1 - Specification of the IP
Flow Information Export (IPFIX) Protocol for the Exchange
of IP Traffic Flow Information
[RFC5102] - Information Model for IP Flow Information Export"
::= { ipfixTemplateDefinitionEntry 5 }
--------------------------------------------------------------------
-- 1.1.5: Export Table
--------------------------------------------------------------------
ipfixExportTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixExportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists all exports of an IPFIX device.
On Exporters this table contains all exports grouped by
Transport Session, Observation Domain Id, Template Id and
Metering Process represented by the
ipfixMeteringProcessCacheId. Thanks to the ipfixExportIndex
the exports can group one or more Transport Sessions to
achieve a special functionality like failover management,
load-balancing etc. The entries with the same
ipfixExportIndex, the same ipfixObservationDomainId
and the same ipfixMeteringProcessCacheId define a Transport
Session group. If the Exporter does not use Transport
Session grouping then each ipfixExportIndex contains a
single ipfixMeteringProcessCacheId and thus a singe
Transport Session and this session MUST have the member
type primary(1). Transport Sessions referenced in this
table MUST have the ipfixTransportSessionDeviceMode
exporting(1).
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 37]
Internet-Draft IPFIX MIB July 2009
On Collectors this table is not needed."
::= { ipfixMainObjects 5 }
ipfixExportEntry OBJECT-TYPE
SYNTAX IpfixExportEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixExportTable"
INDEX {
ipfixExportIndex,
ipfixMeteringProcessCacheId,
ipfixTemplateObservationDomainId,
ipfixTemplateId,
ipfixTransportSessionIndex
}
::= { ipfixExportTable 1 }
IpfixExportEntry ::=
SEQUENCE {
ipfixExportIndex Unsigned32,
ipfixExportMemberType INTEGER
}
ipfixExportIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in
the ipfixExportTable. The value is expected
to remain constant from a re-initialization of the entity's
network management agent to the next re-initialization.
A common ipfixExportIndex between two entries from this
table expresses that there is a relationship between the
Transport Sessions in ipfixTransportSessionIndex. The type
of relationship is expressed by the value of
ipfixExportMemberType."
::= { ipfixExportEntry 1 }
ipfixExportMemberType OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
primary(1),
secondary(2),
parallel(3),
loadBalancing(4)
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 38]
Internet-Draft IPFIX MIB July 2009
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The type of a member Transport Session in a Transport
Session group (identified by the value of ipfixExportIndex,
ipfixObservationDomainId and ipfixMeteringProcessCacheId).
The following values are valid:
unknown(0)
This value MUST be used if the status of the group
membership cannot be detected by the equipment. This
value should be avoided as far as possible.
primary(1)
This value is used for a group member that is used as
the primary target of an Exporter. Other group members
(with the same ipfixExportIndex and
ipfixMeteringProcessCacheId) MUST NOT have the value
primary(1) but MUST have the value secondary(2).
This value MUST also be specified if the Exporter does
not support Transport Session grouping.In this case the
group contains only one Transport Session.
secondary(2)
This value is used for a group member that is used as a
secondary target of an Exporter. The Exporter will use
one of the targets specified as secondary(2) within the
same Transport Session group when the primary target is
not reachable.
parallel(3)
This value is used for a group member that is used for
duplicate exporting i.e., all group members identified
by the ipfixExportIndex are exporting the same Records
in parallel. This implies that all group members MUST
have the the same membertype parallel(3).
loadBalancing(4)
This value is used for a group member that is used as
as one target for load-balancing. This means that a
Record is sent to one of the group members in this
group identified by ipfixExportIndex.
This implies that all group members MUST have the same
membertype load-balancing(4)."
::= { ipfixExportEntry 2 }
--------------------------------------------------------------------
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 39]
Internet-Draft IPFIX MIB July 2009
-- 1.1.6: Metering Process Table
--------------------------------------------------------------------
ipfixMeteringProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixMeteringProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists so called caches used at the Metering
Process to store the metering data of Flows observed at
the Observation Points given in the
ipfixObservationPointGroupReference. The table lists the
timeouts that specify when the cached metering data is
exported as a Flow Record by the Templates linked to this
entry.
On Collectors the table is not needed."
::= { ipfixMainObjects 6 }
ipfixMeteringProcessEntry OBJECT-TYPE
SYNTAX IpfixMeteringProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixMeteringProcessTable."
INDEX { ipfixMeteringProcessCacheId }
::= { ipfixMeteringProcessTable 1 }
IpfixMeteringProcessEntry ::=
SEQUENCE {
ipfixMeteringProcessCacheId Unsigned32,
ipfixMeteringProcessObservationPointGroupRef Unsigned32,
ipfixMeteringProcessCacheActiveTimeout Unsigned32,
ipfixMeteringProcessCacheInactiveTimeout Unsigned32
}
ipfixMeteringProcessCacheId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in the
ipfixMeterinProcessTable. The value is expected to remain
constant from a re-initialization of the entity's network
management agent to the next re-initialization."
::= { ipfixMeteringProcessEntry 1 }
ipfixMeteringProcessObservationPointGroupRef OBJECT-TYPE
SYNTAX Unsigned32
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 40]
Internet-Draft IPFIX MIB July 2009
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The Observation Point Group Id that links this table entry
to the ipfixObservationPointTable. The matching
ipfixObservationPointGroupId in that table gives the
Observation Points used in that cache. If the Observation
Points are unknown the
ipfixMeteringProcessObservationPointGroupRef MUST be zero."
::= { ipfixMeteringProcessEntry 2 }
ipfixMeteringProcessCacheActiveTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds after which an active Flow is expired.
On the Exporter this object contains the time after which a
Flow is expired (and a Data Record for the template is sent)
even though packets matching this Flow are still received by
the Metering Process. If this value is 0 the Flow is not
prematurely expired."
REFERENCE
"[I-D.ietf-ipfix-architecture] Section 5.1.1, item 3 -
Architecture for IP Flow Information Export"
::= { ipfixMeteringProcessEntry 3 }
ipfixMeteringProcessCacheInactiveTimeout OBJECT-TYPE
SYNTAX Unsigned32
UNITS "seconds"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The time in seconds after which an inactive Flow is
expired.
On the Exporter this object contains the time after which a
Flow is expired (and a Data Record for the template is sent)
when no packets matching this Flow are received by the
Metering Process for the given number of seconds. If this
value is zero the Flow is timed out immediately i.e., a Data
Record is sent for every packet received by the Metering
Process."
REFERENCE
"[I-D.ietf-ipfix-architecture] Section 5.1.1, item 1 -
Architecture for IP Flow Information Export"
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 41]
Internet-Draft IPFIX MIB July 2009
::= { ipfixMeteringProcessEntry 4 }
--------------------------------------------------------------------
-- 1.1.7: Observation Point Table
--------------------------------------------------------------------
ipfixObservationPointTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixObservationPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists the Observation Points used within an
Exporter by the Metering Process. The index
ipfixObservationPointGroupId groups Observation Points
and is referenced in the Metering Process table.
On Collectors this table is not needed."
::= { ipfixMainObjects 7 }
ipfixObservationPointEntry OBJECT-TYPE
SYNTAX IpfixObservationPointEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixObservationPointTable."
INDEX {
ipfixObservationPointGroupId,
ipfixObservationPointIndex
}
::= { ipfixObservationPointTable 1 }
IpfixObservationPointEntry ::=
SEQUENCE {
ipfixObservationPointGroupId Unsigned32,
ipfixObservationPointIndex Unsigned32,
ipfixObservationPointPhysicalEntity PhysicalIndexOrZero,
ipfixObservationPointPhysicalEntityDirection INTEGER
}
ipfixObservationPointGroupId OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in the
ipfixObservationDomainTable. The value is expected to remain
constant from a re-initialization of the entity's network
management agent to the next re-initialization.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 42]
Internet-Draft IPFIX MIB July 2009
This index represents a group of Observation Points.
The special value of 0 MUST NOT be used within this table
but is reserved for the usage in the
ipfixMeteringProcessTable. An index of 0 for the
ipfixObservationPointGroupReference index in that table
indicates that an Observation Point is unknown or
unspecified for a Metering Process cache."
::= { ipfixObservationPointEntry 1 }
ipfixObservationPointIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in the
ipfixObservationDomainTable. The value is expected to remain
constant from a re-initialization of the entity's network
management agent to the next re-initialization.
This index represents a single Observation Point in an
Observation Point group."
::= { ipfixObservationPointEntry 2 }
ipfixObservationPointPhysicalEntity OBJECT-TYPE
SYNTAX PhysicalIndexOrZero
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object contains the index of a physical entity in
the Entity MIB. This physical entity is the given
Observation Domain. If such a physical entity cannot be
specified or is not known then the object is zero."
::= { ipfixObservationPointEntry 3 }
ipfixObservationPointPhysicalEntityDirection OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
ingress(1),
egress(2),
both(3)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The direction of the flow that is monitored on the given
physical entity. The following values are valid:
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 43]
Internet-Draft IPFIX MIB July 2009
unknown(0)
This value muse be used if a direction is not
known for the given physical entity.
ingress(1)
This value is used for monitoring incoming flows on the
given physical entity.
egress(2)
This value is used for monitoring outgoing flows on the
given physical entity.
both(3)
This value is used for monitoring incoming and outgoing
flows on the given physical entity."
::= { ipfixObservationPointEntry 4 }
--------------------------------------------------------------------
-- 1.1.8: Selection Process Table
--------------------------------------------------------------------
ipfixSelectionProcessTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixSelectionProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains Selector Functions connected to a
Metering Process by the index ipfixMeteringProcessCacheId.
The Selector Functions are group into Selection Processes
by the ipfixSelectionProcessIndex. The Selector Functions
are applied within the Selection Processto the packets
observed for the given Metering Process cache in increasing
order implied by the ipfixSelectionProcessSelectorIndex.
This means Selector Functions with lower
ipfixSelectionProcessSelectorIndex are applied first. The
resulting Flow Records are then exported by using the
connected Templates.
Since IPFIX does not define any Selector Function (except
selecting every packet) this is a placeholder for future
use and a guideline for implementing enterprise specific
Selector Function objects.
The following object tree should visualize how the Selector
Function objects should be implemented:
ipfixSelectorFunctions
|
+- ipfixFuncSelectAll
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 44]
Internet-Draft IPFIX MIB July 2009
| |
| +- ipfixFuncSelectAllAvail (is the function available?)
|
+- ipfixFuncF2
| |
| +- ipfixFuncF2Avail (is the function F2 available)
| |
| +- ipfixFuncF2Parameters (a table with parameters)
...
|
+- ipfixFunFn...
If a Selector Function takes parameters the MIB should
contain a table with an entry for each set of parameters
used at the Exporter."
::= { ipfixMainObjects 8 }
ipfixSelectionProcessEntry OBJECT-TYPE
SYNTAX IpfixSelectionProcessEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixSelectionProcessTable."
INDEX {
ipfixMeteringProcessCacheId,
ipfixSelectionProcessIndex,
ipfixSelectionProcessSelectorIndex
}
::= { ipfixSelectionProcessTable 1 }
IpfixSelectionProcessEntry ::= SEQUENCE {
ipfixSelectionProcessIndex Unsigned32,
ipfixSelectionProcessSelectorIndex Unsigned32,
ipfixSelectionProcessSelectorFunction OBJECT IDENTIFIER
}
ipfixSelectionProcessIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Locally arbitrary, but unique identifier of an entry in the
ipfixSelectionProcessTable. The value is expected to remain
constant from a re-initialization of the entity's network
management agent to the next re-initialization."
::= { ipfixSelectionProcessEntry 1 }
ipfixSelectionProcessSelectorIndex OBJECT-TYPE
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 45]
Internet-Draft IPFIX MIB July 2009
SYNTAX Unsigned32 (1..4294967295)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Index specifying the order in which the referenced
ipfixSelctionProcessSelectorFunction's are applied to the
observed packet stream within the given Selection Process
(identified by the ipfixSelectionProcessIndex). The
Selector Functions are applied in increasing order i.e.,
Selector Functions with lower index are applied first."
::= { ipfixSelectionProcessEntry 2 }
ipfixSelectionProcessSelectorFunction OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The pointer to the Selector Function used at position
ipfixSelectionProcessSelectorIndex in the list of Selector
Functions for the Metering Process cache specified by the
index ipfixMeteringProcessCacheId and the for the given
Selection Process (identified by the
ipfixSelectionProcessIndex).
This usually points to an object in the IPFIX SELECTOR MIB.
If the Selector Function does take no parameters then it
MUST point to the root of the function subtree. If the
function takes parameters then it MUST point to an entry
in the parameter table of the Selector Function."
::= { ipfixSelectionProcessEntry 3 }
--------------------------------------------------------------------
-- 1.2.1: Transport Session Statistics Table
--------------------------------------------------------------------
ipfixTransportSessionStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixTransportSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists Transport Sessions statistics between
Exporting Process and Collecting Process."
::= { ipfixStatistics 1 }
ipfixTransportSessionStatsEntry OBJECT-TYPE
SYNTAX IpfixTransportSessionStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 46]
Internet-Draft IPFIX MIB July 2009
"Defines an entry in the ipfixTransportSessionStatsTable"
AUGMENTS { ipfixTransportSessionEntry }
::= { ipfixTransportSessionStatsTable 1 }
IpfixTransportSessionStatsEntry ::=
SEQUENCE {
ipfixTransportSessionRate Gauge32,
ipfixTransportSessionPackets Counter64,
ipfixTransportSessionBytes Counter64,
ipfixTransportSessionMessages Counter64,
ipfixTransportSessionDiscardedMessages Counter64,
ipfixTransportSessionRecords Counter64,
ipfixTransportSessionTemplates Counter64,
ipfixTransportSessionOptionsTemplates Counter64,
ipfixTransportSessionDiscontinuityTime TimeStamp
}
ipfixTransportSessionRate OBJECT-TYPE
SYNTAX Gauge32
UNITS "bytes/second"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of bytes per second received by the
Collector or transmitted by the Exporter. A
value of zero (0) means that no packets were sent or
received yet. This object is updated every second."
::= { ipfixTransportSessionStatsEntry 1 }
ipfixTransportSessionPackets OBJECT-TYPE
SYNTAX Counter64
UNITS "packets"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets received by the Collector
or transmitted by the Exporter.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 2 }
ipfixTransportSessionBytes OBJECT-TYPE
SYNTAX Counter64
UNITS "bytes"
MAX-ACCESS read-only
STATUS current
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 47]
Internet-Draft IPFIX MIB July 2009
DESCRIPTION
"The number of bytes received by the Collector
or transmitted by the Exporter.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 3 }
ipfixTransportSessionMessages OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of IPFIX messages received by the
Collector or transmitted by the Exporter.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 4 }
ipfixTransportSessionDiscardedMessages OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of received IPFIX Message that are malformed,
cannot be decoded, are received in the wrong order or are
missing according to the sequence number.
If used at the Exporter the number of messages that could
not be sent due to e.g. internal buffer overflows, network
congestion, or routing issues.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 5 }
ipfixTransportSessionRecords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Data Records received by the Collector or
transmitted by the Exporter.
Discontinuities in the value of this counter can occur at
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 48]
Internet-Draft IPFIX MIB July 2009
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 6 }
ipfixTransportSessionTemplates OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Templates received or transmitted.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 7 }
ipfixTransportSessionOptionsTemplates OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Options Templates received or transmitted.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTransportSessionDiscontinuityTime."
::= { ipfixTransportSessionStatsEntry 8 }
ipfixTransportSessionDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent occasion at which
one or more of the Transport Session counters suffered a
discontinuity.
A value of zero indicates no such discontinuity has
occurred since the last re-initialisation of the local
management subsystem."
::= { ipfixTransportSessionStatsEntry 9 }
--------------------------------------------------------------------
-- 1.2.2: Template Statistics Table
--------------------------------------------------------------------
ipfixTemplateStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixTemplateStatsEntry
MAX-ACCESS not-accessible
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 49]
Internet-Draft IPFIX MIB July 2009
STATUS current
DESCRIPTION
"This table lists statistics objects per Template."
::= { ipfixStatistics 2 }
ipfixTemplateStatsEntry OBJECT-TYPE
SYNTAX IpfixTemplateStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixTemplateStatsTable"
AUGMENTS { ipfixTemplateEntry }
::= { ipfixTemplateStatsTable 1 }
IpfixTemplateStatsEntry ::=
SEQUENCE {
ipfixTemplateDataRecords Counter64,
ipfixTemplateDiscontinuityTime TimeStamp
}
ipfixTemplateDataRecords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Data Records that are transmitted or received
per Template.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTemplateDiscontinuityTime."
::= { ipfixTemplateStatsEntry 1 }
ipfixTemplateDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent occasion at which
one or more of the Template counters suffered a
discontinuity.
A value of zero indicates no such discontinuity has
occurred since the last re-initialisation of the local
management subsystem."
::= { ipfixTemplateStatsEntry 2 }
--------------------------------------------------------------------
-- 1.2.3: Metering Process Statistics Table
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 50]
Internet-Draft IPFIX MIB July 2009
--------------------------------------------------------------------
ipfixMeteringProcessStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixMeteringProcessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table lists statistic objects that have data per
Metering Process cache.
On Collectors this table is not needed."
::= { ipfixStatistics 3 }
ipfixMeteringProcessStatsEntry OBJECT-TYPE
SYNTAX IpfixMeteringProcessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixMeteringProcessStatsTable."
AUGMENTS { ipfixMeteringProcessEntry }
::= { ipfixMeteringProcessStatsTable 1 }
IpfixMeteringProcessStatsEntry ::=
SEQUENCE {
ipfixMeteringProcessCacheActiveFlows Gauge32,
ipfixMeteringProcessCacheInactiveFlows Gauge32,
ipfixMeteringProcessDataRecords Counter64,
ipfixMeteringProcessDiscontinuityTime TimeStamp
}
ipfixMeteringProcessCacheActiveFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Flows currently active at this cache."
::= { ipfixMeteringProcessStatsEntry 1 }
ipfixMeteringProcessCacheInactiveFlows OBJECT-TYPE
SYNTAX Gauge32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of Flows currently inactive at this cache."
::= { ipfixMeteringProcessStatsEntry 2 }
ipfixMeteringProcessDataRecords OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 51]
Internet-Draft IPFIX MIB July 2009
STATUS current
DESCRIPTION
"The number of Data Records generated.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixTemplateDiscontinuityTime."
::= { ipfixMeteringProcessStatsEntry 3 }
ipfixMeteringProcessDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent occasion at which
one or more of the Metering Process counters suffered a
discontinuity.
A value of zero indicates no such discontinuity has
occurred since the last re-initialisation of the local
management subsystem."
::= { ipfixMeteringProcessStatsEntry 4 }
--------------------------------------------------------------------
-- 1.2.4: Selectoion Process Statistics Table
--------------------------------------------------------------------
ipfixSelectionProcessStatsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpfixSelectionProcessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains statistics for the Selector Functions
connected to Metering Process by the index
ipfixMeteringProcessCacheId.
The indexes MUST match an entry in the
ipfixSelectionProcessTable."
::= { ipfixStatistics 4 }
ipfixSelectionProcessStatsEntry OBJECT-TYPE
SYNTAX IpfixSelectionProcessStatsEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Defines an entry in the ipfixSelectionProcessStatsTable."
AUGMENTS { ipfixSelectionProcessEntry }
::= { ipfixSelectionProcessStatsTable 1 }
IpfixSelectionProcessStatsEntry ::= SEQUENCE {
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 52]
Internet-Draft IPFIX MIB July 2009
ipfixSelectionProcessStatsPacketsObserved Counter64,
ipfixSelectionProcessStatsPacketsDropped Counter64,
ipfixSelectionProcessStatsDiscontinuityTime TimeStamp
}
ipfixSelectionProcessStatsPacketsObserved OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets observed at the entry point of the
function. The entry point may be the Observation Point or
the exit point of another Selector Function.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixSelectionProcessStatsDiscontinuityTime."
::= { ipfixSelectionProcessStatsEntry 1 }
ipfixSelectionProcessStatsPacketsDropped OBJECT-TYPE
SYNTAX Counter64
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The number of packets dropped while selecting packets.
Discontinuities in the value of this counter can occur at
re-initialisation of the management system, and at other
times as indicated by the value of
ipfixSelectionProcessStatsDiscontinuityTime."
::= { ipfixSelectionProcessStatsEntry 2 }
ipfixSelectionProcessStatsDiscontinuityTime OBJECT-TYPE
SYNTAX TimeStamp
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The value of sysUpTime at the most recent occasion at which
one or more of the Selector counters suffered a
discontinuity.
A value of zero indicates no such discontinuity has
occurred since the last re-initialisation of the local
management subsystem."
::= { ipfixSelectionProcessStatsEntry 3 }
--==================================================================
-- 2: Conformance Information
--==================================================================
ipfixCompliances OBJECT IDENTIFIER ::= { ipfixConformance 1 }
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 53]
Internet-Draft IPFIX MIB July 2009
ipfixGroups OBJECT IDENTIFIER ::= { ipfixConformance 2 }
--------------------------------------------------------------------
-- 2.1: Compliance Statements
--------------------------------------------------------------------
ipfixCollectorCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An implementation that builds an IPFIX Collector
that complies to this module MUST implement the objects
defined in the mandatory group ipfixCommonGroup.
The implementation of all objects in the other groups is
optional and depends on the corresponding functionality
implemented in the equipment.
An implementation that is compliant to this MIB module
is limited to use only the values TCP (6), UDP (17) and
SCTP (132) in the ipfixTransportSessionProtocol object
because these are the only protocol currently specified
for usage within IPFIX (see [RFC5101])."
MODULE -- this module
MANDATORY-GROUPS {
ipfixCommonGroup
}
GROUP ipfixCommonStatsGroup
DESCRIPTION
"These objects should be implemented if the statistics
function is implemented in the equipment."
::= { ipfixCompliances 1 }
ipfixExporterCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An implementation that builds an IPFIX Exporter that
complies to this module MUST implement the objects defined
in the mandatory group ipfixCommonGroup. The implementation
of all other objects depends on the implementation of the
corresponding functionality in the equipment."
MODULE -- this module
MANDATORY-GROUPS {
ipfixCommonGroup,
ipfixExporterGroup
}
GROUP ipfixCommonStatsGroup
DESCRIPTION
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 54]
Internet-Draft IPFIX MIB July 2009
"These objects should be implemented if the statistics
function is implemented in the equipment."
GROUP ipfixExporterStatsGroup
DESCRIPTION
"These objects MUST be implemented if statistical functions
are implemented on the equipment."
::= { ipfixCompliances 2 }
--------------------------------------------------------------------
-- 2.2: MIB Grouping
--------------------------------------------------------------------
ipfixCommonGroup OBJECT-GROUP
OBJECTS {
ipfixExportVersion,
ipfixTransportSessionProtocol,
ipfixTransportSessionSourceAddressType,
ipfixTransportSessionSourceAddress,
ipfixTransportSessionDestinationAddressType,
ipfixTransportSessionDestinationAddress,
ipfixTransportSessionSourcePort,
ipfixTransportSessionDestinationPort,
ipfixTransportSessionSctpAssocId,
ipfixTransportSessionDeviceMode,
ipfixTransportSessionTemplateRefreshTimeout,
ipfixTransportSessionOptionsTemplateRefreshTimeout,
ipfixTransportSessionTemplateRefreshPacket,
ipfixTransportSessionOptionsTemplateRefreshPacket,
ipfixTransportSessionStatus,
ipfixTemplateSetId,
ipfixTemplateAccessTime,
ipfixTemplateDefinitionIeId,
ipfixTemplateDefinitionIeLength,
ipfixTemplateDefinitionEnterprise,
ipfixTemplateDefinitionFlags
}
STATUS current
DESCRIPTION
"The main IPFIX objects."
::= { ipfixGroups 1 }
ipfixCommonStatsGroup OBJECT-GROUP
OBJECTS {
ipfixTransportSessionRate,
ipfixTransportSessionPackets,
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 55]
Internet-Draft IPFIX MIB July 2009
ipfixTransportSessionBytes,
ipfixTransportSessionMessages,
ipfixTransportSessionDiscardedMessages,
ipfixTransportSessionRecords,
ipfixTransportSessionTemplates,
ipfixTransportSessionOptionsTemplates,
ipfixTransportSessionDiscontinuityTime,
ipfixTemplateDataRecords,
ipfixTemplateDiscontinuityTime
}
STATUS current
DESCRIPTION
"Common statistical objects."
::= { ipfixGroups 3 }
ipfixExporterGroup OBJECT-GROUP
OBJECTS {
ipfixExportMemberType,
ipfixMeteringProcessObservationPointGroupRef,
ipfixMeteringProcessCacheActiveTimeout,
ipfixMeteringProcessCacheInactiveTimeout,
ipfixObservationPointPhysicalEntity,
ipfixObservationPointPhysicalEntityDirection,
ipfixSelectionProcessSelectorFunction
}
STATUS current
DESCRIPTION
"The main objects for Exporters."
::= { ipfixGroups 4 }
ipfixExporterStatsGroup OBJECT-GROUP
OBJECTS {
ipfixMeteringProcessDataRecords,
ipfixMeteringProcessCacheActiveFlows,
ipfixMeteringProcessCacheInactiveFlows,
ipfixMeteringProcessDiscontinuityTime,
ipfixSelectionProcessStatsPacketsObserved,
ipfixSelectionProcessStatsPacketsDropped,
ipfixSelectionProcessStatsDiscontinuityTime
}
STATUS current
DESCRIPTION
"The statistical objects for Exporters."
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 56]
Internet-Draft IPFIX MIB July 2009
::= { ipfixGroups 5 }
END
8.2. IPFIX SELECTOR MIB Definition
IPFIX-SELECTOR-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, mib-2
FROM SNMPv2-SMI -- RFC2578
TruthValue
FROM SNMPv2-TC -- RFC2579
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF; -- RFC2580
ipfixSelectorMIB MODULE-IDENTITY
LAST-UPDATED "200906020900Z" -- 02 June 2009
ORGANIZATION "IETF IPFIX Working Group"
CONTACT-INFO
"WG charter:
http://www.ietf.org/html.charters/ipfix-charter.html
Mailing Lists:
General Discussion: ipfix@ietf.org
To Subscribe: http://www1.ietf.org/mailman/listinfo/ipfix
Archive:
http://www1.ietf.org/mail-archive/web/ipfix/current/index.html
Editor:
Thomas Dietz
NEC Europe Ltd.
NEC Laboratories Europe
Network Research Division
Kurfuersten-Anlage 36
69115 Heidelberg
Germany
Phone: +49 6221 4342-128
Email: Thomas.Dietz@nw.neclab.eu
Atsushi Kobayashi
NTT Information Sharing Platform Laboratories
3-9-11 Midori-cho
Musashino-shi
180-8585
Japan
Phone: +81-422-59-3978
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 57]
Internet-Draft IPFIX MIB July 2009
Email: akoba@nttv6.net
Benoit Claise
Cisco Systems, Inc.
De Kleetlaan 6a b1
Degem 1831
Belgium
Phone: +32 2 704 5622
Email: bclaise@cisco.com"
DESCRIPTION
"The IPFIX SELECTOR MIB module defines the standard
filtering and sampling functions that can be referenced in
the ipfixSelectorTable of the IPFIX MIB. The subtree
ipfixSelectorFunctions is a placeholder where all standard
filtering and sampling functions should be located.
The IPFIX SELECTOR MIB module is maintained by IANA and can
be extended through Expert Review [RFC5226], i.e. review by
one of a group of experts designated by an IETF Area
Director. The group of experts MUST check the requested MIB
objects for completeness and accuracy of the description.
Requests for MIB objects that duplicate the functionality of
existing objects SHOULD be declined. The smallest available
OID SHOULD be assigned to a new MIB objects. The
specification of new MIB objects SHOULD follow the structure
specified in RFC yyyy and MUST be published using a
well-established and persistent publication medium. The
experts will initially be drawn from the Working Group
Chairs and document editors of the IPFIX and PSAMP Working
Groups.
Copyright (c) 2009 IETF Trust and the persons identified as
the document authors. All rights reserved. This version
of this MIB module is part of RFC yyyy; see the RFC itself
for full legal notices."
-- replace yyyy with actual RFC number & remove this notice
-- Revision history
REVISION "200906020900Z" -- 02 June 2009
DESCRIPTION
"Initial version, published as RFC yyyy."
-- replace yyyy with actual RFC number & remove this notice
::= { mib-2 zzz }
-- zzz to be assigned by IANA.
--******************************************************************
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 58]
Internet-Draft IPFIX MIB July 2009
-- Top Level Structure of the MIB
--******************************************************************
ipfixSelectorObjects OBJECT IDENTIFIER
::= { ipfixSelectorMIB 1 }
ipfixSelectorConformance OBJECT IDENTIFIER
::= { ipfixSelectorMIB 2 }
--==================================================================
-- 1: Objects used by all IPFIX implementations
--==================================================================
--------------------------------------------------------------------
-- 1.1: Packet Selector Functions for IPFIX
--------------------------------------------------------------------
ipfixSelectorFunctions OBJECT IDENTIFIER
::= { ipfixSelectorObjects 1 }
--------------------------------------------------------------------
-- 1.1.1: Function 1: Selecting All Packets
--------------------------------------------------------------------
ipfixFuncSelectAll OBJECT IDENTIFIER
::= { ipfixSelectorFunctions 1 }
ipfixFuncSelectAllAvail OBJECT-TYPE
SYNTAX TruthValue
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the availability of the trivial
function of selecting all packets. This function is always
available."
::= { ipfixFuncSelectAll 1 }
--==================================================================
-- 2: Conformance Information
--==================================================================
ipfixSelectorCompliances OBJECT IDENTIFIER
::= { ipfixSelectorConformance 1 }
ipfixSelectorGroups OBJECT IDENTIFIER
::= { ipfixSelectorConformance 2 }
--------------------------------------------------------------------
-- 2.1: Compliance Statements
--------------------------------------------------------------------
ipfixSelectorBasicCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"An implementation that builds an IPFIX Exporter that
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 59]
Internet-Draft IPFIX MIB July 2009
complies to this module MUST implement the objects defined
in the mandatory group ipfixBasicGroup. The implementation
of all other objects depends on the implementation of the
corresponding functionality in the equipment."
MODULE -- this module
MANDATORY-GROUPS {
ipfixSelectorBasicGroup
}
::= { ipfixSelectorCompliances 1 }
--------------------------------------------------------------------
-- 2.2: MIB Grouping
--------------------------------------------------------------------
ipfixSelectorBasicGroup OBJECT-GROUP
OBJECTS {
ipfixFuncSelectAllAvail
}
STATUS current
DESCRIPTION
"The main IPFIX objects."
::= { ipfixSelectorGroups 1 }
END
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 60]
Internet-Draft IPFIX MIB July 2009
9. Security Considerations
There are no management objects defined in this MIB module that have
a MAX-ACCESS clause of read-write and/or read-create. So, if these
MIB modules are implemented correctly, then there is no risk that an
intruder can alter or create any management objects of these MIB
modules via direct SNMP SET operations.
Some of the readable objects in these MIB modules (i.e., objects with
a MAX-ACCESS other than not-accessible) may be considered sensitive
or vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability:
o ipfixTransportSessionTable - contains configuration data that
might be sensitive because objects in this table may reveal
information about the network infrastructure
o ipfixExportTable - contains configuration data that might be
sensitive because object in this table may reveal information
about the network infrastructure as well
o ipfixMeteringProcessTable - contains configuration data that might
be sensitive because objects in this table may reveal information
about the IPFIX Device itself
o ipfixObservationPointTable - contains configuration data that
might be sensitive because objects in this table may reveal
information about the IPFIX Device itself and the network
infrastructure
o ipfixSelectorFunctions - currently contains no sensitive data but
might want to be secured anyway since it may contain sensitive
data in a future version
All other objects and tables contain no data that is considered
sensitive.
SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the objects
in these MIB modules.
It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8),
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 61]
Internet-Draft IPFIX MIB July 2009
including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an
instance of these MIB modules is properly configured to give access
to the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 62]
Internet-Draft IPFIX MIB July 2009
10. IANA Considerations
The MIB module in this document uses the following IANA-assigned
OBJECT IDENTIFIER values recorded in the SMI Numbers registry:
Descriptor OBJECT IDENTIFIER value
---------- -----------------------
ipfixMIB { mib-2 xxxxx }
ipfixSelectorMIB { mib-2 zzzzz }
Further on the whole IPFIX SELECTOR MIB module is maintained by IANA.
Additions to this MIB module are subject to Expert Review [RFC5226],
i.e., review by one of a group of experts designated by an IETF Area
Director. The group of experts MUST check the requested MIB objects
for completeness and accuracy of the description. Requests for MIB
objects that duplicate the functionality of existing objects SHOULD
be declined. The smallest available OID SHOULD be assigned to a new
MIB objects. The specification of new MIB objects SHOULD follow the
structure specified in Section 6 and MUST be published using a well-
established and persistent publication medium. The experts will
initially be drawn from the Working Group Chairs and document editors
of the IPFIX and PSAMP Working Groups.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 63]
Internet-Draft IPFIX MIB July 2009
11. Acknowledgment
This document is a product of the IPFIX working group. The authors
would like to thank the following persons: Gerhard Muenz for keeping
this MIB module consistent with the IPFIX configuration model, Paul
Aitken for his detailed review, Dan Romascanu and the MIB doctors,
and many more, for the technical reviews and feedback.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 64]
Internet-Draft IPFIX MIB July 2009
12. References
12.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999.
[RFC4001] Daniele, M., Haberman, B., Routhier, S., and J.
Schoenwaelder, "Textual Conventions for Internet Network
Addresses", RFC 4001, February 2005.
[RFC3873] Pastor, J. and M. Belinchon, "Stream Control Transmission
Protocol (SCTP) Management Information Base (MIB)",
RFC 3873, September 2004.
[RFC4133] Bierman, A. and K. McCloghrie, "Entity MIB (Version 3)",
RFC 4133, August 2005.
[RFC5101] Claise, B., "Specification of the IP Flow Information
Export (IPFIX) Protocol for the Exchange of IP Traffic
Flow Information", RFC 5101, January 2008.
[RFC5102] Quittek, J., Bryant, S., Claise, B., Aitken, P., and J.
Meyer, "Information Model for IP Flow Information Export",
RFC 5102, January 2008.
[RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 5226,
May 2008.
12.2. Informative References
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 65]
Internet-Draft IPFIX MIB July 2009
[RFC3917] Quittek, J., Zseby, T., Claise, B., and S. Zander,
"Requirements for IP Flow Information Export (IPFIX)",
RFC 3917, October 2004.
[RFC5470] Sadasivan, G., Brownlee, N., Claise, B., and J. Quittek,
"Architecture for IP Flow Information Export", RFC 5470,
March 2009.
[RFC5472] Zseby, T., Boschi, E., Brownlee, N., and B. Claise, "IP
Flow Information Export (IPFIX) Applicability", RFC 5472,
March 2009.
[RFC5474] Duffield, N., Chiou, D., Claise, B., Greenberg, A.,
Grossglauser, M., and J. Rexford, "A Framework for Packet
Selection and Reporting", RFC 5474, March 2009.
[RFC5475] Zseby, T., Molina, M., Duffield, N., Niccolini, S., and F.
Raspall, "Sampling and Filtering Techniques for IP Packet
Selection", RFC 5475, March 2009.
[RFC5476] Claise, B., Johnson, A., and J. Quittek, "Packet Sampling
(PSAMP) Protocol Specifications", RFC 5476, March 2009.
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 66]
Internet-Draft IPFIX MIB July 2009
Authors' Addresses
Thomas Dietz (editor)
NEC Europe Ltd.
NEC Laboratories Europe
Network Research Division
Kurfuersten-Anlage 36
Heidelberg 69115
DE
Phone: +49 6221 4342-128
Email: Thomas.Dietz@nw.neclab.eu
Atsushi Kobayashi
NTT Information Sharing Platform Laboratories
3-9-11 Midori-cho
Musashino-shi, Tokyo 180-8585
JA
Phone: +81-422-59-3978
Email: akoba@nttv6.net
Benoit Claise
Cisco Systems, Inc.
De Kleetlaan 6a b1
Degem 1831
BE
Phone: +32 2 704 5622
Email: bclaise@cisco.com
Dietz, et al. draft-ietf-ipfix-mib-07.txt [Page 67]