IMAP Extensions Working Group M. Crispin INTERNET-DRAFT: IMAP SORT K. Murchison Document: internet-drafts/draft-ietf-imapext-sort-05.txt August 2000 INTERNET MESSAGE ACCESS PROTOCOL - SORT EXTENSION Status of this Memo This document is an Internet-Draft and is in full conformance with all provisions of Section 10 of RFC 2026. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt To view the list Internet-Draft Shadow Directories, see http://www.ietf.org/shadow.html. A revised version of this document will be submitted to the RFC editor as an Informational Document for the Internet Community. A revised version of this draft document, describing an expanded version of this protocol extension, will be submitted to the RFC editor as a Proposed Standard for the Internet Community. Discussion and suggestions for improvement are requested, and should be sent to ietf-imapext@IMC.ORG. This document will expire before 1 March 2001. Distribution of this memo is unlimited. Abstract This document describes an experimental server-based sorting extension to the IMAP4rev1 protocol, as implemented by the University of Washington's IMAP toolkit. This extension provides substantial performance improvements for IMAP clients which offer sorted views. A server which supports this extension indicates this with a Crispin [Page 1] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 capability name of "SORT". Client implementations SHOULD accept any capability name which begins with "SORT" as indicating support for the extension described in this document. This provides for future upwards-compatible extensions. At the time of this document was written, the IMAP Extensions Working Group (IETF-IMAPEXT) was considering upwards-compatible additions to the SORT extension described in this document, tenatively called the SORT2 extension. Crispin [Page 2] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Extracted Subject Text The "SUBJECT" SORT criteria uses a version of the subject which has specific subject artifacts of deployed Internet mail software removed. Due to the complexity of these artifacts, the formal syntax for the subject extraction rules is ambiguous. The following procedure is followed to determing the actual "base subject" which is used to sort by subject: (1) Convert any RFC 2047 encoded-words in the subject to UTF-8. Convert all tabs and continuations to space. Convert all multiple spaces to a single space. (2) Remove all trailing text of the subject that matches the subj-trailer ABNF, repeat until no more matches are possible. (3) Remove all prefix text of the subject that matches the subj-leader ABNF. (4) If there is prefix text of the subject that matches the subj-blob ABNF, and removing that prefix leaves a non-empty subj-base, then remove the prefix text. (5) Repeat (3) and (4) until no matches remain. Note: it is possible to defer step (2) until step (6), but this requires checking for subj-trailer in step (4). (6) If the resulting text begins with the subj-fwd-hdr ABNF and ends with the subj-fwd-trl ABNF, remove the subj-fwd-hdr and subj-fwd-trl and repeat from step (2). (7) The resulting text is the "base subject" used in the SORT. All servers and disconnected clients MUST use exactly this algorithm when sorting by subject. Otherwise there is potential for a user to get inconsistant results based on whether they are running in connected or disconnected IMAP mode. Crispin [Page 3] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Additional Commands This command is an extension to the IMAP4rev1 base protocol. The section header is intended to correspond with where it would be located in the main document if it was part of the base specification. 6.3.SORT. SORT Command Arguments: sort program charset specification searching criteria (one or more) Data: untagged responses: SORT Result: OK - sort completed NO - sort error: can't sort that charset or criteria BAD - command unknown or arguments invalid The SORT command is a variant of SEARCH with sorting semantics for the results. Sort has two arguments before the searching criteria argument; a parenthesized list of sort criteria, and the searching charset. Note that unlike SEARCH, the searching charset argument is mandatory. The US-ASCII and UTF-8 charsets MUST be implemented. All other charsets are optional. There is also a UID SORT command which corresponds to SORT the way that UID SEARCH corresponds to SEARCH. The SORT command first searches the mailbox for messages that match the given searching criteria using the charset argument for the interpretation of strings in the searching criteria. It then returns the matching messages in an untagged SORT response, sorted according to one or more sort criteria. If two or more messages exactly match according to the sorting criteria, these messages are sorted according to the order in which they appear in the mailbox. In other words, there is an implicit sort criterion of "sequence number". When multiple sort criteria are specified, the result is sorted in the priority order that the criteria appear. For example, (SUBJECT DATE) will sort messages in order by their subject text; Crispin [Page 4] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 and for messages with the same subject text will sort by their sent date. Untagged EXPUNGE responses are not permitted while the server is responding to a SORT command, but are permitted during a UID SORT command. The defined sort criteria are as follows. Refer to the Formal Syntax section for the precise syntactic definitions of the arguments. If the associated RFC-822 header for a particular criterion is absent, it is treated as the empty string. The empty string always collates before non-empty strings. ARRIVAL Internal date and time of the message. This differs from the ON criteria in SEARCH, which uses just the internal date. CC RFC-822 local-part of the first "cc" address. DATE Sent date and time from the Date: header, adjusted by time zone. This differs from the SENTON criteria in SEARCH, which uses just the date and not the time, nor adjusts by time zone. FROM RFC-822 local-part of the "From" address. REVERSE Followed by another sort criterion, has the effect of that criterion but in reverse order. SIZE Size of the message in octets. SUBJECT Extracted subject text. TO RFC-822 local-part of the first "To" address. Example: C: A282 SORT (SUBJECT) UTF-8 SINCE 1-Feb-1994 S: * SORT 2 84 882 S: A282 OK SORT completed C: A283 SORT (SUBJECT REVERSE DATE) UTF-8 ALL S: * SORT 5 3 4 1 2 S: A283 OK SORT completed Crispin [Page 5] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 C: A284 SORT (SUBJECT) US-ASCII TEXT "not in mailbox" S: * SORT S: A284 OK SORT completed Crispin [Page 6] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Additional Responses This response is an extension to the IMAP4rev1 base protocol. The section heading of this response is intended to correspond with where it would be located in the main document. 7.2.SORT. SORT Response Data: zero or more numbers The SORT response occurs as a result of a SORT or UID SORT command. The number(s) refer to those messages that match the search criteria. For SORT, these are message sequence numbers; for UID SORT, these are unique identifiers. Each number is delimited by a space. Example: S: * SORT 2 3 6 Crispin [Page 7] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Formal Syntax of SORT commands and Responses sort-data = "SORT" *(SP nz-number) sort = ["UID" SP] "SORT" SP "(" sort-criterion *(SP sort-criterion) ")" SP search_charset 1*(SP search_key) sort-criterion = ["REVERSE" SP] sort-key sort-key = "ARRIVAL" / "CC" / "DATE" / "FROM" / "SIZE" / "SUBJECT" / "TO" The following syntax describes subject extraction rules (2)-(6): subject = *subj-leader [subj-middle] *subj-trailer subj-refwd = ("re" / ("fw" ["d"])) *WSP [subj-blob] ":" subj-blob = "[" *BLOBCHAR "]" *WSP subj-fwd = subj-fwd-hdr subject subj-fwd-trl subj-fwd-hdr = "[fwd:" subj-fwd-trl = "]" subj-leader = (*subj-blob subj-refwd) / WSP subj-middle = *subj-blob (subj-base / subj-fwd) ; last subj-blob is subj-base if subj-base would ; otherwise be empty subj-trailer = "(fwd)" / WSP subj-base = NONWSP *([*WSP] NONWSP) ; can be a subj-blob BLOBCHAR = %x01-5a / %x5c / %x5e-7f ; any CHAR except '[' and ']' NONWSP = %x01-08 / %x0a-1f / %x21-7f ; any CHAR other than WSP Crispin [Page 8] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Security Considerations Security issues are not discussed in this memo. Internationalization Considerations By default, strings are sorted according to the "minimum sorting collation algorithm". All implementations of SORT MUST implement the minimum sorting collation algorithm. In the minimum sorting collation algorithm, the Basic Latin alphabetics (U+0041 to U+005A uppercase, U+0061 to U+007A lowercase) are sorted in a case-insensitive fashion; that is, "A" (U+0041) and "a" (U+0061) are treated as exact equals. All other characters are sorted according to their octet values, as expressed in UTF-8. No attempt is made to treat composed characters specially, or to do case-insensitive comparisons of composed characters. Note: this means, among other things, that the composed characters in the Latin-1 Supplement are not compared in what would be considered an ISO 8859-1 "case-insensitive" fashion. Case comparison rules for characters with diacriticals differ between languages; the minimum sorting collation does not attempt to deal with this at all. This is reserved for other sorting collations, which may be language-specific. Other sorting collations, and the ability to change the sorting collation, will be defined in a separate document dealing with IMAP internationalization. It is anticipated that there will be a generic Unicode sorting collation, which will provide generic case-insensitivity for alphabetic scripts, specification of composed character handling, and language-specific sorting collations. A server which implements non-default sorting collations will modify its sorting behavior according to the selected sorting collation. Non-English translations of "Re" or "Fw"/"Fwd" are not specified for removal in the extracted subject text process. By specifying that only the English forms of the prefixes are used, it becomes a simple display time task to localize the prefix language for the user. If, on the other hand, prefixes in multiple languages are permitted, the result is a geometrically complex, and ultimately unimplementable, task. In order to improve the ability to support non-English display in Internet mail clients, only the English form of these prefixes should be transmitted in Internet mail messages. Crispin [Page 9] INTERNET DRAFT IMAP SORT EXPIRES 1 March 2001 Author's Address Mark R. Crispin Networks and Distributed Computing University of Washington 4545 15th Avenue NE Seattle, WA 98105-4527 Phone: (206) 543-5762 EMail: MRC@CAC.Washington.EDU Kenneth Murchison Oceana Matrix Ltd. 21 Princeton Place Orchard Park, NY 14127 Phone: (716) 662-8973 x26 EMail: ken@oceana.com Crispin [Page 10]