Domain Name System Operations (dnsop) Working Group S. Bortzmeyer
Internet-Draft AFNIC
Updates: 1034,2308 (if approved) S. Huque
Intended status: Standards Track Verisign Labs
Expires: September 11, 2016 March 10, 2016

NXDOMAIN really means there is nothing underneath
draft-ietf-dnsop-nxdomain-cut-01

Abstract

This document states clearly that when a DNS resolver receives a response with response code of NXDOMAIN, it means that the domain name which is thus denied AND ALL THE NAMES UNDER IT do not exist.

REMOVE BEFORE PUBLICATION: this document should be discussed in the IETF DNSOP (DNS Operations) group, through its mailing list. The source of the document, as well as a list of open issues, is currently kept at Github.

This documents clarifies RFC 1034 and modifies a bit RFC 2308 so it updates both of them.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on September 11, 2016.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction and background

The DNS protocol [RFC1035] defines response code 3 as "Name Error", or "NXDOMAIN" [RFC2308], which means that the queried domain name does not exist in the DNS. Since domain names are represented as a tree of labels ([RFC1034], Section 3.1), non-existence of a node implies non-existence of the entire sub-tree rooted at this node.

The DNS iterative resolution algorithm precisely interprets the NXDOMAIN signal in this manner. If it encounters an NXDOMAIN response code from an authoritative server, it immediately stops iteration and returns the NXDOMAIN response to the querier.

However, in most known existing resolvers today, a cached non-existence for a domain is not considered "proof" that there can be no child domains underneath. This is due to an ambiguity in [RFC1034] that failed to distinguish Empty Non-Terminal names (ENT) ([RFC7719]) from nonexistent names. The distinction became especially important for the development of DNSSEC, which provides proof of non-existence. [RFC4035], section 3.1.3.2, describes how security-aware authoritative name servers make the distinction, but no existing RFCs describe the behavior for recursive name servers.

This document specifies that an NXDOMAIN response for a domain name means that no child domains underneath the queried name exist either. And furthermore, that DNS resolvers should interpret cached non-existence in this manner. Since the domain names are organized in a tree, it is a simple consequence of the tree structure: non-existence of a node implies non-existence of the entire sub-tree rooted at this node.

1.1. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

"Denied name": the domain name whose existence has been denied by a response of rcode NXDOMAIN. In most cases, it is the QNAME but, because of [RFC6604], it is not always the case.

Other terms are defined in [RFC1034] or [RFC1035] or (like NXDOMAIN itself) in the more recent [RFC7719].

2. Rules

When an iterative caching DNS resolver receives a response NXDOMAIN, it SHOULD store it in its cache and all names and RRsets at or below that node SHOULD then be considered to be unreachable. Subsequent queries for such names SHOULD elicit an NXDOMAIN response.

[TODO: currently under discussion, some people find it dangerous. Only if the NXDOMAIN is DNSSEC-validated? Perhaps the resolver could be configured to not apply this rule to TLDs (or root). See Section 7.]

For example, consider two successive queries to a resolver, with a non-existing domain 'foo.example': the first is for 'foo.example' (which results in an NXDOMAIN) and the second for 'bar.foo.example' (which also results in an NXDOMAIN). Many resolvers today will forward both queries, as noticed in Section 8. However, following the rules in this document ("NXDOMAIN cut"), a resolver would cache the first NXDOMAIN response, as a sign of non-existence, and then immediately return an NXDOMAIN response for the second query, without transmitting it to an authoritative server.

If the first request is for 'bar.foo.example' and the second for 'baz.foo.example', the first NXDOMAIN response won't tell anything about 'baz.foo.example' and therefore the second query will be transmitted as it was before "NXDOMAIN cut" (see Appendix A).

These rules replace the second paragraph of section 5 of [RFC2308]. Otherwise, this document does not update any other parts of [RFC2308]. The fact that a subtree does not exist is not forever: [RFC2308], section 3, already describes the amount of time that an NXDOMAIN response may be cached (the "negative TTL").

If the NXDOMAIN response due to a cached non-existence is from a DNSSEC signed zone, then it will have accompanying NSEC or NSEC3 records that authenticate the non-existence of the name. For a descendant name of the original NXDOMAIN name, the same set of NSEC or NSEC3 records proves the non-existence of the descendant name. The iterative, caching resolver MUST return these NSEC or NSEC3 records in the response to the triggering query if the query had the DNSSEC OK (DO) bit set.

Warning: if there is a chain of CNAME (or DNAME), the name which does not exist is the last of the chain ([RFC6604]) and not the QNAME. The NXDOMAIN stored in the cache is for the denied name, not always for the QNAME.

3. Benefits

The main benefit is a better efficiency of the caches. In the example above, the resolver send only one query instead of two, the second one being answered from the cache.

The correct behavior (in [RFC1034] and made clearer in this document) is specially useful when combined with QNAME minimisation [I-D.ietf-dnsop-qname-minimisation] since it will allow a resolver to stop searching as soon as an NXDOMAIN is encountered.

NXDOMAIN cut may also help mitigate certain types of random QNAME attacks [joost-dnsterror] [balakrichenan-dafa888], where there is a fixed suffix which does not exist. In these attacks against the authoritative name server, queries are sent to resolvers for a QNAME composed of a fixed suffix ("dafa888.wf" in one of the articles above), which is typically nonexistent, and a random prefix, different for each request. A resolver receiving these requests have to forward them to the authoritative servers. With NXDOMAIN cut, a system administrator would just have to send to the resolver a query for the fixed suffix, the resolver would get a NXDOMAIN and then would stop forwarding the queries. (It would be better if the SOA record in the NXDOMAIN response were sufficient to find the non-existing domain but it is not the case, see Appendix A.)

4. Possible issues

Let's assume the TLD example exists but foobar.example is not delegated (so the example's name servers will reply NXDOMAIN for a query about anything.foobar.example). A system administrator decides to name the internal machines of his organization under office.foobar.example and uses a trick of his resolver to forward requests about this zone to his local authoritative name servers. NXDOMAIN cut would create problems here, since, depending on the order of requests to the resolver, it may have cached the non-existence from example and therefore "deleted" everything under. This document assumes that such setup is rare and does not need to be supported.

Another issue that may happen: today, we see broken authoritative name servers which reply to ENT ([RFC7719], section 6) with NXDOMAIN instead of the normal NODATA ([RFC7719], section 3).

RFC-EDITOR: REMOVE THE PARAGRAPH BEFORE PUBLICATION. An example today is mta2._domainkey.cbs.nl (which exists) where querying _domainkey.cbs.nl yields NXDOMAIN. Another example is www.upenn.edu, redirected to www.upenn.edu-dscg.edgesuite.net while a query for edu-dscg.edgesuite.net returns NXDOMAIN.

Such name servers are definitely wrong and have always been. Their behaviour is incompatible with DNSSEC. Given the advantages of NXDOMAIN cuts, there is little reason to support this behavior.

5. Implementation considerations

This section is non-normative, and is composed only of various things which may be useful for implementors. A recursive resolver may implement its cache in many ways. The most obvious one is a tree data structure, because it fits the data model of domain names. But, in practice, other implementations are possible, as well as various optimisations (such as a tree, augmented by an index of some common domain names).

If a resolver implements its cache as a tree (without any optimisation), one way to follow the rules of Section 2 is, when receiving the NXDOMAIN, to prune the subtree of positive cache entries at that node, or to delete all individual cache entries for names below that node. Then, when searching downward in its cache, this iterative caching DNS resolver stop searching if it encounters a cached non-existence.

Some resolver may have a cache which is NOT organized as a tree (but, for instance, as a dictionary) and therefore have a reason to ignore the rules of Section 2. So these rules are a SHOULD and not a MUST.

6. IANA Considerations

This document has no actions for IANA.

7. Security Considerations

The technique described here may help against a denial-of-service attack named "random qnames" and described in Section 3. Apart from that, it is believed to have no security consequences.

If a resolver does not validate the answers with DNSSEC, or if the zone is not signed, the resolver can of course be poisoned with a false NXDOMAIN, thus "deleting" a part of the domain name tree. This denial-of-service attack is already possible without the rules of this document (but "NXDOMAIN cut" may increase its effects). The only solution is to use DNSSEC.

8. Implementation status - RFC EDITOR: REMOVE BEFORE PUBLICATION

This section records the status of known implementations of the protocol defined by this specification at the time of posting of this Internet-Draft, and is based on a proposal described in [RFC6982]. The description of implementations in this section is intended to assist the IETF in its decision processes in progressing drafts to RFCs. Please note that the listing of any individual implementation here does not imply endorsement by the IETF. Furthermore, no effort has been spent to verify the information presented here that was supplied by IETF contributors. This is not intended as, and must not be construed to be, a catalog of available implementations or their features. Readers are advised to note that other implementations may exist.

According to [RFC6982], "this will allow reviewers and working groups to assign due consideration to documents that have the benefit of running code, which may serve as evidence of valuable experimentation and feedback that have made the implemented protocols more mature. It is up to the individual working groups to use this information as they see fit".

As of today, practically all existing DNS resolvers are conservative by default: they consider a NXDOMAIN as only significant for the name itself, not for the names under. Almost all the current recursive servers will send upstream a query for out-of-cache sub.example.com even if their cache contains an NXDOMAIN for example.com.

There are a few exceptions. The Unbound resolver has a configuration parameter called "harden-below-nxdomain" , which if set to "yes" turns on NXDOMAIN cut behavior ("only DNSSEC-secure nxdomains are used", see Section 7). The PowerDNS recursor has optional partial support for NXDOMAIN cut, for the root domain only, with its "root-nx-trust" setting, described as "If set, an NXDOMAIN from the root-servers will serve as a blanket NXDOMAIN for the entire TLD the query belonged to. The effect of this is far fewer queries to the root-servers.".

9. Acknowledgments

The main idea is in this document is taken from [I-D.vixie-dnsext-resimprove], section 3, "Stopping Downward Cache Search on NXDOMAIN". Thanks to its authors, Paul Vixie, Rodney Joffe, and Frederico Neves. Additionally Tony Finch, John Levine, Jinmei Tatuya, and Duane Wessels provided valuable feedback and suggestions.

10. References

10.1. Normative References

[RFC1034] Mockapetris, P., "Domain names - concepts and facilities", STD 13, RFC 1034, DOI 10.17487/RFC1034, November 1987.
[RFC1035] Mockapetris, P., "Domain names - implementation and specification", STD 13, RFC 1035, DOI 10.17487/RFC1035, November 1987.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC2308] Andrews, M., "Negative Caching of DNS Queries (DNS NCACHE)", RFC 2308, DOI 10.17487/RFC2308, March 1998.
[RFC6604] Eastlake 3rd, D., "xNAME RCODE and Status Bits Clarification", RFC 6604, DOI 10.17487/RFC6604, April 2012.

10.2. Informative References

[RFC4035] Arends, R., Austein, R., Larson, M., Massey, D. and S. Rose, "Protocol Modifications for the DNS Security Extensions", RFC 4035, DOI 10.17487/RFC4035, March 2005.
[RFC6982] Sheffer, Y. and A. Farrel, "Improving Awareness of Running Code: The Implementation Status Section", RFC 6982, DOI 10.17487/RFC6982, July 2013.
[RFC7719] Hoffman, P., Sullivan, A. and K. Fujiwara, "DNS Terminology", RFC 7719, DOI 10.17487/RFC7719, December 2015.
[I-D.vixie-dnsext-resimprove] Vixie, P., Joffe, R. and F. Neves, "Improvements to DNS Resolvers for Resiliency, Robustness, and Responsiveness", Internet-Draft draft-vixie-dnsext-resimprove-00, June 2010.
[I-D.ietf-dnsop-qname-minimisation] Bortzmeyer, S., "DNS query name minimisation to improve privacy", Internet-Draft draft-ietf-dnsop-qname-minimisation-09, January 2016.
[I-D.fujiwara-dnsop-nsec-aggressiveuse] Fujiwara, K. and A. Kato, "Aggressive use of NSEC/NSEC3", Internet-Draft draft-fujiwara-dnsop-nsec-aggressiveuse-02, October 2015.
[joost-dnsterror] Joost, M., "About DNS Attacks and ICMP Destination Unreachable Reports", December 2014.
[balakrichenan-dafa888] Balakrichenan, S., "Disturbance in the DNS - "Random qnames", the dafa888 DoS attack"", October 2014.

Appendix A. Why can't we just use the owner name of the returned SOA?

In this document, we deduce the non-existence of a domain only for NXDOMAIN answers where the denied name was this exact domain. If a resolver sends a query to the name servers of the TLD example, and asks the MX record for www.foobar.example, and receives a NXDOMAIN, it can only register the fact that www.foobar.example (and everything underneath) does not exist. Even if the accompanying SOA record is for example only, one cannot infer that foobar.example is nonexistent. The accompanying SOA indicates the apex of the zone, not the closest existing domain name.

RFC-EDITOR: REMOVE BEFORE PUBLICATION: to use a real example today, ask the authoritative name servers of the TLD fr about anything.which.does.not.exist.gouv.fr. The SOA will indicate fr (the apex) even while gouv.fr does exist (there is no zone cut between gouv.fr and fr).

Deducing the non-existence of a node from the SOA in the NXDOMAIN reply may certainly help with random qnames attacks but this is out-of-scope for this document. It would require to address the problems mentioned in the first paragraph of this section. A possible solution would be, when receiving a NXDOMAIN with a SOA which is more than one label up in the tree, to send requests for the domains which are between the QNAME and the owner name of the SOA. (A resolver which does DNSSEC validation or QNAME minimisation will need to do it, anyway.)

Appendix B. Related approaches

The document [I-D.fujiwara-dnsop-nsec-aggressiveuse] describes another way to address some of the same concerns (decreasing the traffic for non-existing domain names). Unlike NXDOMAIN cut, it requires DNSSEC but it is more powerful since it can synthetize NXDOMAINs for domains that were not queried.

Authors' Addresses

Stephane Bortzmeyer AFNIC 1, rue Stephenson Montigny-le-Bretonneux, 78180 France Phone: +33 1 39 30 83 46 EMail: bortzmeyer+ietf@nic.fr URI: http://www.afnic.fr/
Shumon Huque Verisign Labs 12061 Bluemont Way Reston, 20190 USA EMail: shuque@verisign.com URI: http://www.verisignlabs.com/