DNS-Based Authentication of Named Entities (DANE) T. Finch
Internet-Draft University of Cambridge
Intended status: Standards Track M. Miller
Expires: August 21, 2015 Cisco Systems, Inc.
P. Saint-Andre
&yet
February 17, 2015

Using DNS-Based Authentication of Named Entities (DANE) TLSA Records with SRV Records
draft-ietf-dane-srv-11

Abstract

The DANE specification (RFC 6698) describes how to use TLSA resource records secured by DNSSEC (RFC 4033) to associate a server's connection endpoint with its TLS certificate. However, application protocols that use SRV records (RFC 2782) to indirectly name the target server connection endpoints for a service domain cannot apply the rules from RFC 6698. Therefore this document provides guidelines that enable such protocols to locate and use TLSA records.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on August 21, 2015.

Copyright Notice

Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

The base DANE specification [RFC6698] describes how to use TLSA resource records secured by DNSSEC [RFC4033] to associate a target server's connection endpoint with its TLS certificate. Some application protocols locate connection endpoints indirectly via SRV records [RFC2782]. As a result of this indirection, the rules specified in [RFC6698] cannot be directly applied to such application protocols. (Rules for SMTP [RFC5321], which uses MX resource records instead of SRV records, are described in [I-D.ietf-dane-smtp-with-dane].)

This document describes how to use DANE TLSA records with SRV records. To summarize:

2. Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this memo are to be interpreted as described in [RFC2119].

This draft uses the definitions for "secure", "insecure", "bogus", and "indeterminate" from Section 4.3 of [RFC4035]. This draft uses the acronyms from [RFC7218] for the values of TLSA fields where appropriate.

Additionally, this document uses the following terms:

connection endpoint:
A tuple of a fully qualified DNS host name, transport protocol, and port number that a client uses to establish a connection to the target server.
service domain:
The fully qualified DNS domain name that identifies an application service; corresponds to the term "source domain" from [RFC6125].

This document uses the term "target server host name" in place of the term "derived domain" from the CertID specification [RFC6125].

3. DNS Checks

3.1. SRV Query

When the client makes an SRV query, a successful result will typically be a list of one or more SRV records (or possibly a chain of CNAME / DNAME aliases leading to such a list).

For this specification to apply, the entire chain of DNS RRset(s) returned MUST be "secure" according to DNSSEC validation (Section 5 of [RFC4035]). In the case where the answer is obtained via a chain of CNAME and/or DNAME aliases, the whole chain of CNAME and DNAME RRsets MUST also be secure.

If the SRV lookup fails because the RRset is "bogus" (or the lookup fails for reasons other than no records), the client MUST abort its attempt to connect to the desired service. If the lookup result is "insecure" (or no SRV records exist), this protocol does not apply and the client SHOULD fall back to its non-DNSSEC, non-DANE (and possibly non-SRV) behavior.

When the lookup returns a "secure" RRset (possibly via a chain of "secure" CNAME/DNAME records), the client now has an authentic list of target server connection endpoints with weight and priority values. It performs server ordering and selection using the weight and priority values without regard to the presence or absence of DNSSEC or TLSA records. It also takes note of the DNSSEC validation status of the SRV response for use when checking certificate names (see Section 4). The client can then proceed to making address queries on the target server host names as described in the following section.

3.2. Address Queries

For each SRV target server connnection endpoint, the client makes A and/or AAAA queries, performs DNSSEC validation on the address (A or AAAA) response, and continues as follows based on the results:

3.3. TLSA Queries

The client SHALL construct the TLSA query name as described in Section 3 of [RFC6698], based on the fields from the SRV record: the port number from the SRV RDATA, the transport protocol from the SRV query name, and the TLSA base domain from the SRV target server host name.

For example, the following SRV record for IMAP (see [RFC6186]):

    _imap._tcp.example.com. 86400 IN SRV 10 0 9143 imap.example.net.

leads to the TLSA query shown below:

    _9143._tcp.imap.example.net. IN TLSA ?

3.4. Impact on TLS Usage

The client SHALL determine if the TLSA records returned in the previous step are usable according to Section 4.1 of [RFC6698]. This affects the use TLS as follows:

4. TLS Checks

When connecting to a server, the client MUST use TLS if the responses to the SRV and TLSA queries were "secure" as described above. The rules described in the next two sections apply to such secure responses; Section 4.2 where there is at least one usable TLSA record, and Section 4.1 otherwise.

4.1. SRV Records Only

If the client received zero usable TLSA certificate associations, it SHALL validate the server's TLS certificate using the normal PKIX rules [RFC5280] or protocol-specific rules (e.g., following [RFC6125]) without further input from the TLSA records. In this case, the client uses the information in the server certificate and the DNSSEC validation status of the SRV query in its authentication checks. It SHOULD use the Server Name Indication extension (TLS SNI) [RFC6066] or its functional equivalent in the relevant application protocol (e.g., in XMPP [RFC6120] this is the 'to' address of the initial stream header). The preferred name SHALL be chosen as follows, and the client SHALL verify the identity asserted by the server's certificate according to Section 6 of [RFC6125], using a list of reference identifiers constructed as follows (note again that in RFC 6125 the terms "source domain" and "derived domain" to refer to the same things as "service domain" and "target server host name" in this document). The examples below assume a service domain of "im.example.com" and a target server host name of "xmpp23.hosting.example.net".

SRV is insecure:
The reference identifiers SHALL include the service domain and MUST NOT include the SRV target server host name (e.g., include "im.example.com" but not "xmpp23.hosting.example.net"). The service domain is the preferred name for TLS SNI or its equivalent.
SRV is secure:
The reference identifiers SHALL include both the service domain and the SRV target server host name (e.g., include both "im.example.com" and "xmpp23.hosting.example.net"). The target server host name is the preferred name for TLS SNI or its equivalent.

In the latter case, the client will accept either identity to ensure compatibility with servers that support this specification as well as servers that do not support this specification.

4.2. TLSA Records

If the client received one or more usable TLSA certificate associations, it SHALL process them as described in Section 2.1 of [RFC6698].

If the TLS server's certificate -- or the public key of the server's certificate -- matches a usable TLSA record with Certificate Usage "DANE-EE", the client MUST ignore expiration checks from [RFC5280] and reference identifier checks from [RFC6125]. The information in such a TLSA record supersedes the non-key information in the certificate.

5. Guidance for Protocol Authors

This document describes how to use DANE with application protocols in which target servers are discovered via SRV records. Although this document attempts to provide generic guidance applying to all such protocols, additional documents for particular application protocols could cover related topics, such as:

For example, [I-D.ietf-xmpp-dna] covers such topics for the Extensible Messaging and Presence Protocol (XMPP).

6. Guidance for Server Operators

To conform to this specification, the published SRV records and subsequent address (A and AAAA) records MUST be secured with DNSSEC. There SHOULD also be at least one TLSA record published that authenticates the server's certificate.

When using TLSA records with Certificate Usage "DANE-EE", it is not necessary for the deployed certificate to contain an identifier for either the source domain or target server host name. However, operators need to be aware that servers relying solely on validation using Certificate Usage "DANE-EE" TLSA records might prevent clients that do not support this specification from successfully connecting with TLS.

For TLSA records with Certificate Usage types other than "DANE-EE", the certificate(s) MUST contain an identifier that matches:

Servers that support multiple service domains (i.e., so-called "multi-tenanted environments") can implement the Transport Layer Security Server Name Indication (TLS SNI) [RFC6066] or its functional equivalent to determine which certificate to offer. Clients that do not support this specification will indicate a preference for the service domain name, while clients that support this specification will indicate the target server host name. However, the server determines what certificate to present in the TLS handshake; e.g., the presented certificate might only authenticate the target server host name.

7. Guidance for Application Developers

Developers of application clients that depend on DANE-SRV often would like to prepare as quickly as possible for making a connection to the intended service, thus reducing the wait time for end users. To make this optimization possible, a DNS library might perform the SRV queries, address queries, and TLSA queries in parallel. (Because a TLSA record can be ignored if it turns out that the address record on which it depends is not secure, performing the TLSA queries in parallel with the SRV queries and address queries is not harmful from a security perspective and can yield some operational benefits.)

8. Internationalization Considerations

If any of the DNS queries are for an internationalized domain name, then they need to use the A-label form [RFC5890].

9. IANA Considerations

No IANA action is required.

10. Security Considerations

10.1. Mixed Security Status

We do not specify that all of the target server connection endpoints for a service domain need to be consistent in whether they have or do not have TLSA records. This is so that partial or incremental deployment does not break the service. Different levels of deployment are likely if a service domain has a third-party fallback server, for example.

The SRV sorting rules are unchanged; in particular they have not been altered in order to prioritize secure connection endpoints over insecure connection endpoints. If a site wants to be secure it needs to deploy this protocol completely; a partial deployment is not secure and we make no special effort to support it.

10.2. Certificate Subject Name Matching

Section 4 of the TLSA specification [RFC6698] leaves the details of checking names in certificates to higher level application protocols, though it suggests the use of [RFC6125].

Name checks are not necessary if the matching TLSA record is of Certificate Usage "DANE-EE". Because such a record identifies the specific certificate (or public key of the certificate), additional checks are superfluous and potentially conflicting.

Otherwise, while DNSSEC provides a secure binding between the server name and the TLSA record, and the TLSA record provides a binding to a certificate, this latter step can be indirect via a chain of certificates. For example, a Certificate Usage "PKIX-TA" TLSA record only authenticates the CA that issued the certificate, and third parties can obtain certificates from the same CA. Therefore, clients need to check whether the server's certificate matches one of the expected reference identifiers to ensure that the certificate was issued by the CA to the server the client expects.

11. References

11.1. Normative References

[I-D.ietf-dane-ops] Dukhovni, V. and W. Hardaker, "DANE TLSA implementation and operational guidance", Internet-Draft draft-ietf-dane-ops-00, October 2013.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2782] Gulbrandsen, A., Vixie, P. and L. Esibov, "A DNS RR for specifying the location of services (DNS SRV)", RFC 2782, February 2000.
[RFC4033] Arends, R., Austein, R., Larson, M., Massey, D. and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, March 2005.
[RFC4035] Arends, R., Austein, R., Larson, M., Massey, D. and S. Rose, "Protocol Modifications for the DNS Security Extensions", RFC 4035, March 2005.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R. and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, May 2008.
[RFC5890] Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", RFC 5890, August 2010.
[RFC6066] Eastlake, D., "Transport Layer Security (TLS) Extensions: Extension Definitions", RFC 6066, January 2011.
[RFC6125] Saint-Andre, P. and J. Hodges, "Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS)", RFC 6125, March 2011.
[RFC6698] Hoffman, P. and J. Schlyter, "The DNS-Based Authentication of Named Entities (DANE) Transport Layer Security (TLS) Protocol: TLSA", RFC 6698, August 2012.
[RFC7218] Gudmundsson, O., "Adding Acronyms to Simplify Conversations about DNS-Based Authentication of Named Entities (DANE)", RFC 7218, April 2014.

11.2. Informative References

[I-D.ietf-dane-smtp-with-dane] Dukhovni, V. and W. Hardaker, "SMTP security via opportunistic DANE TLS", Internet-Draft draft-ietf-dane-smtp-with-dane-04, November 2013.
[I-D.ietf-xmpp-dna] Saint-Andre, P. and M. Miller, "Domain Name Associations (DNA) in the Extensible Messaging and Presence Protocol (XMPP)", Internet-Draft draft-ietf-xmpp-dna-05, February 2014.
[RFC3403] Mealling, M., "Dynamic Delegation Discovery System (DDDS) Part Three: The Domain Name System (DNS) Database", RFC 3403, October 2002.
[RFC5321] Klensin, J., "Simple Mail Transfer Protocol", RFC 5321, October 2008.
[RFC6120] Saint-Andre, P., "Extensible Messaging and Presence Protocol (XMPP): Core", RFC 6120, March 2011.
[RFC6186] Daboo, C., "Use of SRV Records for Locating Email Submission/Access Services", RFC 6186, March 2011.

Appendix A. Examples

In the following, most of the DNS resource data is elided for simplicity.

A.1. IMAP

              
; mail domain
_imap._tcp.example.com.   SRV 10 0 9143 imap.example.net.
example.com.              RRSIG   SRV ...

; target server host name
imap.example.net.         A      192.0.2.1
imap.example.net.         RRSIG  A ...

imap.example.net.         AAAA   2001:db8:212:8::e:1
imap.example.net.         RRSIG  ...

; TLSA resource record
_9143._tcp.imap.example.net.  TLSA   ...
_9143._tcp.imap.example.net.  RRSIG  TLSA ...

            

Mail messages received for addresses at example.com are retrieved via IMAP at imap.example.net. Connections to imap.example.net port 9143 that use STARTTLS will get a server certificate that authenticates the name imap.example.net.

A.2. XMPP

              
; XMPP domain
_xmpp-client.example.com. SRV     1 0 5222 im.example.net.
_xmpp-client.example.com. RRSIG   SRV ...

; target server host name
im.example.net.           A      192.0.2.3
im.example.net.           RRSIG  A ...

im.example.net.           AAAA   2001:db8:212:8::e:4
im.example.net.           RRSIG  AAAA ...

; TLSA resource record
_5222._tcp.im.example.net.  TLSA   ...
_5222._tcp.im.example.net.  RRSIG  TLSA ...

            

XMPP sessions for addresses at example.com are established at im.example.net. Connections to im.example.net port 5222 that use STARTTLS will get a server certificate that authenticates the name im.example.net.

Appendix B. Rationale

The long-term goal of this specification is to settle on TLS certificates that verify the target server host name rather than the service domain, since this is more convenient for servers hosting multiple domains (so-called "multi-tenanted environments") and scales up more easily to larger numbers of service domains.

There are a number of other reasons for doing it this way:

This specification does not provide an option to put TLSA records under the service domain because that would add complexity without providing any benefit, and security protocols are best kept simple. As described above, there are real-world cases where authenticating the service domain cannot be made to work, so there would be complicated criteria for when service domain TLSA records might be used and when they cannot. This is all avoided by putting the TLSA records under the target server host name.

The disadvantage is that clients which do not complete DNSSEC validation must, according to [RFC6125] rules, check the server certificate against the service domain, since they have no other way to authenticate the server. This means that SNI support or its functional equivalent is necessary for backward compatibility.

Appendix C. Acknowledgements

Thanks to Mark Andrews for arguing that authenticating the target server host name is the right thing, and that we ought to rely on DNSSEC to secure the SRV lookup. Thanks to Stephane Bortzmeyer, James Cloos, Viktor Dukhovni, Ned Freed, Olafur Gudmundsson, Paul Hoffman, Phil Pennock, Hector Santos, Jonas Schneider, and Alessandro Vesely for helpful suggestions.

Authors' Addresses

Tony Finch University of Cambridge Computing Service New Museums Site Pembroke Street Cambridge, CB2 3QH ENGLAND Phone: +44 797 040 1426 EMail: dot@dotat.at URI: http://dotat.at/
Matthew Miller Cisco Systems, Inc. 1899 Wynkoop Street, Suite 600 Denver, CO 80202 USA EMail: mamille2@cisco.com
Peter Saint-Andre &yet EMail: peter@andyet.com URI: https://andyet.com/