Network Working Group Frank Dawson, Lotus Internet Draft Derik Stenerson, Microsoft Expires six months after: August 7, 1998 Internet Calendaring and Scheduling Core Object Specification (iCalendar) Status of this Memo This memo is an Internet-Draft. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups can also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months. Internet-Drafts can be updated, replaced, or made obsolete by other documents at any time. It is not appropriate to use Internet- Drafts as reference material or to cite them other than as a "working draft" or "work in progress". To view the entire list of current Internet-Drafts, please check the "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Distribution of this memo is unlimited. Copyright (C) The Internet Society 1997. All Rights Reserved. Abstract There is a clear need to provide and deploy interoperable calendaring and scheduling services for the Internet. Current group scheduling and Personal Information Management (PIM) products are being extended for use across the Internet, today, in proprietary ways. This memo has been defined to provide the definition of a common format for openly exchanging calendaring and scheduling information across the Internet. This memo is formatted as a registration for a MIME media type per [RFC 2048]. However, the format in this memo is equally applicable for use outside of a MIME message content type. The proposed media type value is "text/calendar". This string would label a media type containing calendaring and scheduling information encoded as text characters formatted in a manner outlined below. This MIME media type provides a standard content type for capturing calendar event, to-do and journal entry information. It also can be used to convey free/busy time information. The content type is suitable as a MIME message entity that can be transferred over MIME based email systems, using HTTP or some other Internet transport. In Dawson/Stenerson 1 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 addition, the content type is useful as an object for interactions between desktop applications using the operating system clipboard, drag/drop or file systems capabilities. This memo is based on the earlier work of the vCalendar specification for the exchange of personal calendaring and scheduling information. In order to avoid confusion with this referenced work, this memo is to be known as the iCalendar specification. Readers may also refer to the calendaring and scheduling model defined in [ICMS] for a description of this Internet application. This memo defines the format for specifying iCalendar object methods. An iCalendar object method is a set of usage constraints for the iCalendar object. For example, these methods might define scheduling messages that request an event be scheduled, reply to an event request, send a cancellation notice for an event, modify or replace the definition of an event, provide a counter proposal for an original event request, delegate an event request to another individual, request free or busy time, reply to a free or busy time request, or provide similar scheduling messages for a to-do or journal entry calendar component. The iCalendar Transport-indendent Interoperability Protocol (iTIP) defined in [ITIP] is one such scheduling protocol. Dawson/Stenerson 2 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Table of Contents 1 Introduction.........................................................6 2 Basic Grammar and Conventions........................................6 2.1 Formatting Conventions...........................................7 2.2 Related Memos....................................................8 2.3 International Considerations.....................................8 3 Registration Information.............................................8 3.1 Content Type.....................................................9 3.2 Parameters.......................................................9 3.3 Content Header Fields...........................................10 3.4 Encoding Considerations.........................................10 3.5 Security Considerations.........................................10 3.6 Interoperability Considerations.................................11 3.7 Applications Which Use This Media Type..........................11 3.8 Additional Information..........................................11 3.9 Magic Numbers...................................................11 3.10 File Extensions................................................11 3.11 Contact for Further Information:...............................12 3.12 Intended Usage.................................................12 3.13 Authors/Change Controllers.....................................12 4 iCalendar Object Specification......................................12 4.1 Content Lines...................................................13 4.1.1 List and Field Separators....................................15 4.1.2 Multiple Values..............................................16 4.1.3 Binary Content...............................................16 4.1.4 Character Set................................................16 4.2 Property Parameters.............................................17 4.2.1 Alternate Text Representation................................18 4.2.2 Common Name..................................................18 4.2.3 Calendar User Type...........................................19 4.2.4 Delegators...................................................19 4.2.5 Delegatees...................................................20 4.2.6 Directory Entry Reference....................................20 4.2.7 Inline Encoding..............................................21 4.2.8 Format Type..................................................21 4.2.9 Free/Busy Time Type..........................................22 4.2.10 Language....................................................22 4.2.11 Group or List Membership....................................23 4.2.12 Participation Status........................................24 4.2.13 Recurrence Identifier Range.................................25 4.2.14 Alarm Trigger Relationship..................................26 4.2.15 Relationship Type...........................................26 4.2.16 Participation Role..........................................27 4.2.17 RSVP Expectation............................................27 4.2.18 Sent By.....................................................28 4.2.19 Time Zone Identifier........................................28 4.2.20 Value Data Types............................................29 4.3 Property Value Data Types.......................................30 4.3.1 Binary.......................................................30 4.3.2 Boolean......................................................31 4.3.3 Calendar User Address........................................31 Dawson/Stenerson 3 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.3.4 Date.........................................................32 4.3.5 Date-Time....................................................32 4.3.6 Duration.....................................................34 4.3.7 Float........................................................35 4.3.8 Integer......................................................35 4.3.9 Period of Time...............................................36 4.3.10 Recurrence Rule.............................................37 4.3.11 Text........................................................42 4.3.12 Time........................................................43 4.3.13 URI.........................................................45 4.3.14 UTC Offset..................................................45 4.4 iCalendar Object................................................46 4.5 Property........................................................46 4.6 Calendar Components.............................................47 4.6.1 Event Component..............................................48 4.6.2 To-do Component..............................................50 4.6.3 Journal Component............................................51 4.6.4 Free/Busy Component..........................................53 4.6.5 Time Zone Component..........................................55 4.6.6 Alarm Component..............................................61 4.7 Calendar Properties.............................................67 4.7.1 Calendar Scale...............................................67 4.7.2 Method.......................................................67 4.7.3 Product Identifier...........................................68 4.7.4 Version......................................................69 4.8 Component Properties............................................70 4.8.1 Descriptive Component Properties.............................70 4.8.1.1 Attachment...............................................70 4.8.1.2 Categories...............................................71 4.8.1.3 Classification...........................................72 4.8.1.4 Comment..................................................72 4.8.1.5 Description..............................................73 4.8.1.6 Geographic Position......................................74 4.8.1.7 Location.................................................76 4.8.1.8 Percent Complete.........................................77 4.8.1.9 Priority.................................................77 4.8.1.10 Resources...............................................79 4.8.1.11 Status..................................................80 4.8.1.12 Summary.................................................81 4.8.2 Date and Time Component Properties...........................82 4.8.2.1 Date/Time Completed......................................82 4.8.2.2 Date/Time End............................................82 4.8.2.3 Date/Time Due............................................83 4.8.2.4 Date/Time Start..........................................84 4.8.2.5 Duration.................................................85 4.8.2.6 Free/Busy Time...........................................86 4.8.2.7 Time Transparency........................................87 4.8.3 Time Zone Component Properties...............................88 4.8.3.1 Time Zone Identifier.....................................88 4.8.3.2 Time Zone Name...........................................89 4.8.3.3 Time Zone Offset From....................................90 4.8.3.4 Time Zone Offset To......................................91 4.8.3.5 Time Zone URL............................................91 4.8.4 Relationship Component Properties............................92 Dawson/Stenerson 4 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.8.4.1 Attendee.................................................92 4.8.4.2 Contact..................................................94 4.8.4.3 Organizer................................................96 4.8.4.4 Recurrence ID............................................97 4.8.4.5 Related To...............................................98 4.8.4.6 Uniform Resource Locator................................100 4.8.4.7 Unique Identifier.......................................100 4.8.5 Recurrence Component Properties.............................102 4.8.5.1 Exception Date/Times....................................102 4.8.5.2 Exception Rule..........................................103 4.8.5.3 Recurrence Date/Times...................................104 4.8.5.4 Recurrence Rule.........................................105 4.8.6 Alarm Component Properties..................................113 4.8.6.1 Action..................................................113 4.8.6.2 Repeat Count............................................114 4.8.6.3 Trigger.................................................115 4.8.7 Change Management Component Properties......................117 4.8.7.1 Date/Time Created.......................................117 4.8.7.2 Date/Time Stamp.........................................117 4.8.7.3 Last Modified...........................................118 4.8.7.4 Sequence Number.........................................119 4.8.8 Miscellaneous Component Properties..........................120 4.8.8.1 Non-standard Properties.................................120 4.8.8.2 Request Status..........................................121 5 iCalendar Object Examples..........................................123 6 Recommended Practices..............................................126 7 Registration of Content Type Elements..............................128 7.1 Registration of New and Modified iCalendar Object Methods......128 7.2 Registration of New Properties.................................128 7.2.1 Define the property.........................................128 7.2.2 Post the Property definition................................129 7.2.3 Allow a comment period......................................129 7.2.4 Submit the property for approval............................129 7.3 Property Change Control........................................130 8 References.........................................................130 9 Acknowledgments....................................................132 10 Author's Address..................................................132 11 Full Copyright Statement..........................................133 Dawson/Stenerson 5 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 1 Introduction The use of calendaring and scheduling has grown considerably in the last decade. Enterprise and inter-enterprise business has become dependent on rapid scheduling of events and actions using this information technology. However, the longer term growth of calendaring and scheduling, is currently limited by the lack of Internet standards for the message content types that are central to these knowledgeware applications. This memo is intended to progress the level of interoperability possible between dissimilar calendaring and scheduling applications. This memo defines a MIME content type for exchanging electronic calendaring and scheduling information. The Internet Calendaring and Scheduling Core Object Specification, or iCalendar, allows for the capture and exchange of information normally stored within a calendaring and scheduling application; such as a Personal Information Manager (PIM) or a Group Scheduling product. The calendaring and scheduling model, defined in the [ICMS], is a useful reference to terms and the general framework of this Internet application. The iCalendar format is suitable as an exchange format between applications or systems. The format is defined in terms of a MIME content type. This will enable the object to be exchanged using several transports, including but not limited to SMTP, HTTP, a file system, desktop interactive protocols such as the use of a memory- based clipboard or drag/drop interactions, point-to-point asynchronous communication, wired-network transport, or some form of unwired transport such as infrared might also be used. The memo also provides for the definition of iCalendar object methods that will map this content type to a set of messages for supporting calendaring and scheduling operations such as requesting, replying to, modifying, and canceling meetings or appointments, to-dos and journal entries. The iCalendar object methods can be used to define other calendaring and scheduling operations such a requesting for and replying with free/busy time data. Such a scheduling protocol is defined in the iCalendar Transport-independent Interoperability Protocol (iTIP) defined in [ITIP]. The memo also includes a formal grammar for the content type based on the Internet ABNF defined in [RFC 2234]. This ABNF is required for the implementation of parsers and to serve as the definitive reference when ambiguities or questions arise in interpreting the descriptive prose definition of the memo. 2 Basic Grammar and Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY" and Dawson/Stenerson 6 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 "OPTIONAL" in this document are to be interoperated as described in [RFC 2119]. This memo makes use of both a descriptive prose and a more formal notation for defining the calendaring and scheduling format. The notation used in this memo is the ABNF notation of [RFC 2234]. Readers intending on implementing this format defined in this memo should be familiar with this notation in order to properly interpret the specifications of this memo. All numeric and hexadecimal values used in this memo are given in decimal notation. All names of properties, property parameters, enumerated property values and property parameter values are case-insensitive. However, all other property values are case-sensitive, unless otherwise stated. Note: All indented editorial notes, such as this one, are intended to provide the reader with additional information. The information is not essential to the building of an implementation conformant with this memo. The information is provided to highlight a particular feature or characteristic of the memo. The format for the iCalendar object is based on the syntax of the [MIME DIR] content type. While the iCalendar object is not a profile of the [MIME DIR] content type, it does reuse a number of the elements from the [MIME DIR] specification. 2.1 Formatting Conventions The mechanisms defined in this memo are defined in prose. Many of the terms used to describe these have common usage that is different than the standards usage of this memo. In order to reference within this memo elements of the calendaring and scheduling model [ICMS], core object (this memo) or interoperability protocol [ITIP] some formatting conventions have been used. Calendaring and scheduling roles defined by [ICMS] are referred to in quoted-strings of text with the first character of each word in upper case. For example, "Organizer" refers to a role of a "Calendar User" within the scheduling protocol defined by [ITIP]. Calendar components defined by this memo are referred to with capitalized, quoted-strings of text. All calendar components start with the letter "V". For example, "VEVENT" refers to the event calendar component, "VTODO" refers to the to-do calendar component and "VJOURNAL" refers to the daily journal calendar component. Scheduling methods defined by [ITIP] are referred to with capitalized, quoted-strings of text. For example, "REQUEST" refers to the method for requesting a scheduling calendar component be created or modified, "REPLY" refers to the method a recipient of a request uses to update their status with the "Organizer" of the calendar component. Dawson/Stenerson 7 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 The properties defined by this memo are referred to with capitalized, quoted-strings of text, followed by the word "property". For example, "ATTENDEE" property refers to the iCalendar property used to convey the calendar address of a calendar user. Property parameters defined by this memo are referred to with lowercase, quoted-strings of text, followed by the word "parameter". For example, "value" parameter refers to the iCalendar property parameter used to override the default data type for a property value. Enumerated values defined by this memo are referred to with capitalized text, either alone or followed by the word "value". For example, the "MINUTELY" value can be used with the "FREQ" component of the "RECUR" data type to specify repeating components based on an interval of one minute or more. 2.2 Related Memos Implementers will need to be familiar with several other memos that, along with this memo, form a framework for Internet calendaring and scheduling standards. This memo, [ICAL], specifies a core specification of objects, data types, properties and property parameters. [ICMS] - specifies a common terminology and abstract model; [ITIP] - specifies an interoperability protocol for scheduling between different implementations; [IMIP] specifies an Internet email binding for [ITIP]. [IRIP] - specifies an Internet real time protocol binding for [ITIP]. This memo does not attempt to repeat the specification of concepts or definitions from these other memos. Where possible, references are made to the memo that provides for the specification of these concepts or definitions. 2.3 International Considerations In the rest of this document, descriptions of characters are of the form "character name (codepoint)", where "codepoint" is from the US- ASCII character set. The "character name" is the authoritative description; (codepoint) is a reference to that character in US- ASCII or US-ASCII compatible sets (for example the ISO-8859-x family, UTF-8, ISO-2022-xx, KOI8-R). If a non-US-ASCII compatible character set is used, appropriate code-point from that character set MUST be chosen instead. Use of non-US-ASCII-compatible character sets is NOT recommended. 3 Registration Information The Calendaring and Scheduling Core Object Specification is intended for use as a MIME content type. However, the implementation of the memo is in no way limited solely as a MIME content type. Dawson/Stenerson 8 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 3.1 Content Type The following text is intended to register this memo as the MIME content type "text/calendar". To: ietf-types@uninett.no Subject: Registration of MIME content type text/calendar. MIME media type name: text MIME subtype name: calendar 3.2 Parameters Required parameters: none Optional parameters: charset, method, component and optinfo The "charset" parameter is defined in [RFC 2046] for other body parts. It is used to identify the default character set used within the body part. The "method" parameter is used to convey the iCalendar object method or transaction semantics for the calendaring and scheduling information. It also is an identifier for the restricted set of properties and values that the iCalendar object consists of. The parameter is to be used as a guide for applications interpreting the information contained within the body part. It SHOULD NOT be used to exclude or require particular pieces of information unless the identified method definition specifically calls for this behavior. Unless specifically forbidden by a particular method definition, a text/calendar content type can contain any set of properties permitted by the Calendaring and Scheduling Core Object Specification. The "method" parameter MUST be the same value as that specified in the "METHOD" component property in the iCalendar object. If one is present, the other MUST also be present. The value for the "method" parameter is defined as follows: method = 1*(ALPHA / DIGIT / "-") ; IANA registered iCalendar object method The "component" parameter conveys the type of iCalendar calendar component within the body part. If the iCalendar object contains more than one calendar component type, then multiple component parameters MUST be specified. The value for the "component" parameter is defined as follows: component = ("VEVENT" / "VTODO" / "VJOURNAL" / "VFREEBUSY" / "VTIMEZONE" / x-name / iana-token) Dawson/Stenerson 9 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 The "optinfo" parameter conveys optional information about the iCalendar object within the body part. This parameter can only specify semantics already specified by the iCalendar object and that can be otherwise determined by parsing the body part. In addition, the optional information specified by this parameter MUST be consistent with that information specified by the iCalendar object. For example, it can be used to convey the "Attendee" response status to a meeting request. The parameter value consists of a string value. The parameter can be specified multiple times. This parameter MAY only specify semantics already specified by the iCalendar object and that can be otherwise determined by parsing the body part. The value for the "optinfo" parameter is defined as follows: optinfo = infovalue / qinfovalue infovalue = iana-token / x-name qinfovalue = DQUOTE (infovalue) DQUOTE 3.3 Content Header Fields Optional content header fields: Any header fields defined by [RFC 2045]. 3.4 Encoding Considerations This MIME content type can contain 8bit characters, so the use of quoted-printable or BASE64 MIME content-transfer-encodings might be necessary when iCalendar objects are transferred across protocols restricted to the 7bit repertoire. Note that a text valued property in the content entity can also have content encoding of special characters using a BACKSLASH character (US-ASCII decimal 92) escapement technique. This means that content values can end up encoded twice. 3.5 Security Considerations SPOOFING - - In this memo, the "Organizer" is the only person authorized to make changes to an existing "VEVENT", "VTODO", "VJOURNAL" calendar component and redistribute the updates to the "Attendees". An iCalendar object that maliciously changes or cancels an existing "VEVENT", "VTODO" or "VJOURNAL" or "VFREEBUSY" calendar component might be constructed by someone other than the "Organizer" and sent to the "Attendees". In addition in this memo, other than the "Organizer", an "Attendee" of a "VEVENT", "VTODO", "VJOURNAL" calendar component is the only other person authorized to update any parameter associated with their "ATTENDEE" property and send it to the "Organizer". An iCalendar object that maliciously changes the "ATTENDEE" parameters can be constructed by someone other than the real "Attendee" and sent to the "Organizer". Dawson/Stenerson 10 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 PROCEDURAL ALARMS - - An iCalendar object can be created that contains a "VEVENT" and "VTODO" calendar component with "VALARM" calendar components. The "VALARM" calendar component can be of type PROCEDURE and can have an attachment containing some sort of executable program. Implementations that incorporate these types of alarms are subject to any virus or malicious attack that might occur as a result of executing the attachment. ATTACHMENTS - - An iCalendar object can include references to Uniform Resource Locators that can be programmed resources. Implementers and users of this memo should be aware of the network security implications of accepting and parsing such information. In addition, the security considerations observed by implementations of electronic mail systems should be followed for this memo. 3.6 Interoperability Considerations This MIME content type is intended to define a common format for conveying calendaring and scheduling information between different systems. It is heavily based on the earlier [VCAL] industry specification. 3.7 Applications Which Use This Media Type This content-type is designed for widespread use by Internet calendaring and scheduling applications. In addition, applications in the workflow and document management area might find this content- type applicable. The [ITIP] and [IMIP] and [IRIP] Internet protocols directly use this content-type also. Future work on an Internet calendar access protocol will utilize this content-type too. 3.8 Additional Information This memo defines this content-type. 3.9 Magic Numbers None. 3.10 File Extensions The file extension of "ics" is to be used to designate a file containing (an arbitrary set of) calendaring and scheduling information consistent with this MIME content type. The file extension of "ifb" is to be used to designate a file containing free or busy time information consistent with this MIME content type. Macintosh file type codes: The file type code of "iCal" is to be used in Apple MacIntosh operating system environments to designate a file Dawson/Stenerson 11 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 containing calendaring and scheduling information consistent with this MIME media type. The file type code of "iFBf" is to be used in Apple MacIntosh operating system environments to designate a file containing free or busy time information consistent with this MIME media type. 3.11 Contact for Further Information: Frank Dawson 6544 Battleford Drive Raleigh, NC 27613-3502 919-676-9515 (Telephone) 919-676-9564 (Data/Facsimile) Frank_Dawson@Lotus.com (Internet Mail) Derik Stenerson One Microsoft Way Redmond, WA 98052-6399 425-936-5522 (Telephone) 425-936-7329 (Facsimile) deriks@microsoft.com (Internet Mail) 3.12 Intended Usage COMMON 3.13 Authors/Change Controllers Frank Dawson 6544 Battleford Drive Raleigh, NC 27613-3502 919-676-9515 (Telephone) 919-676-9564 (Data/Facsimile) Frank_Dawson@Lotus.com (Internet Mail) Derik Stenerson One Microsoft Way Redmond, WA 98052-6399 425-936-5522 (Telephone) 425-936-7329 (Facsimile) deriks@microsoft.com (Internet Mail) 4 iCalendar Object Specification The following sections define the details of a Calendaring and Scheduling Core Object Specification. This information is intended to be an integral part of the MIME content type registration. In addition, this information can be used independent of such content registration. In particular, this memo has direct applicability for use as a calendaring and scheduling exchange format in file-, memory- or network-based transport mechanisms. Dawson/Stenerson 12 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.1 Content Lines The iCalendar object is organized into individual lines of text, called content lines. Content lines are delimited by a line break, which is a CRLF sequence (US-ASCII decimal 13, followed by US-ASCII decimal 10). Lines of text SHOULD NOT be longer than 75 octets, excluding the line break. Long content lines SHOULD be split into a multiple line representations using a line "folding" technique. That is, a long line can be split between any two characters by inserting a CRLF immediately followed by a single linear white space character (i.e., SPACE, US-ASCII decimal 32 or HTAB, US-ASCII decimal 9). Any sequence of CRLF followed immediately by a single linear white space character is ignored (i.e., removed) when processing the content type. For example the line: DESCRIPTION:This is a long description that exists on a long line. Can be represented as: DESCRIPTION:This is a lo ng description that exists on a long line. The process of moving from this folded multiple line representation to its single line representation is called "unfolding". Unfolding is accomplished by removing the CRLF character and the linear white space character that immediately follows. When parsing a content line, folded lines MUST first be unfolded according to the unfolding procedure described above. When generating a content line, lines longer than 75 octets SHOULD be folded according to the folding procedure described above. The content information associated with an iCalendar object is formatted using a syntax similar to that defined by [MIME DIR]. That is, the content information consists of CRLF-separated content lines. The following notation defines the lines of content in an iCalendar object: contentline = name *(";" param ) ":" value CRLF ; This ABNF is just a general definition for an initial parsing ; of the content line into its property name, parameter list, ; and value string ; When parsing a content line, folded lines MUST first ; be unfolded according to the unfolding procedure ; described above. When generating a content line, lines ; longer than 75 octets SHOULD be folded according to ; the folding procedure described above. Dawson/Stenerson 13 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 name = x-name / iana-token iana-token = 1*(ALPHA / DIGIT / "-") ; iCalendar identifier registered with IANA x-name = "X-" [vendorid "-"] 1*(ALPHA / DIGIT / "-") ; Reservered for experimental use. Not intended for use in ; released products. vendorid = 3*(ALPHA / DIGIT) ;Vendor identification param = param-name "=" param-value *("," param-value) ; Each property defines the specific ABNF for the parameters ; allowed on the property. Refer to specific properties for ; precise parameter ABNF. param-name = iana-token / x-token param-value = paramtext / quoted-string paramtext = *SAFE-CHAR value = *VALUE-CHAR quoted-string = DQUOTE *QSAFE-CHAR DQUOTE NON-US-ASCII = %x80-F8 ; Use restricted by charset parameter ; on outer MIME object (UTF-8 preferred) QSAFE-CHAR = WSP / %x21 / %x23-7E / NON-US-ASCII ; Any character except CTLs and DQUOTE SAFE-CHAR = WSP / %x21 / %x23-2B / %x2D-39 / %x3C-7E / NON-US-ASCII ; Any character except CTLs, DQUOTE, ";", ":", "," VALUE-CHAR = WSP / %x21-7E / NON-US-ASCII ; Any textual character CR = %x0D ; carriage return LF = %x0A ; line feed CRLF = CR LF ; Internet standard newline CTL = %x00-08 / %x0A-1F / %x7F ; Controls ALPHA = %x41-5A / %x61-7A ; A-Z / a-z Dawson/Stenerson 14 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 DIGIT = %x30-39 ; 0-9 DQUOTE = %x22 ; Quotation Mark WSP = SPACE / HTAB SPACE = %x20 HTAB = %x09 The property value component of a content line has a format that is property specific. Refer to the section describing each property for a definition of this format. All names of properties, property parameters, enumerated property values and property parameter values are case-insensitive. However, all other property values are case-sensitive, unless otherwise stated. 4.1.1 List and Field Separators Some properties and parameters allow a list of values. Values in a list of values MUST be separated by a COMMA character (US-ASCII decimal 44). There is no significance to the order of values in a list. For those parameter values (such as those that specify URI values) that are specified in quoted-strings, the individual quoted- strings are separated by a COMMA character (US-ASCII decimal 44). Some property values are defined in terms of multiple parts. These structured property values MUST have their value parts separated by a SEMICOLON character (US-ASCII decimal 59). Some properties allow a list of parameters. Each property parameter in a list of property parameters MUST be separated by a SEMICOLON character (US-ASCII decimal 59). Property parameters with values containing a COLON, a SEMICOLON or a COMMA character MUST be placed in quoted text. For example, in the following properties a SEMICOLON is used to separate property parameters from each other, and a COMMA is used to separate property values in a value list. ATTENDEE;RSVP=TRUE;ROLE=REQ-PARTICIPANT:MAILTO: jsmith@host.com RDATE;VALUE=DATE:19970304,19970504,19970704,19970904 Dawson/Stenerson 15 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.1.2 Multiple Values Some properties defined in the iCalendar object can have multiple values. The general rule for encoding multi-valued items is to simply create a new content line for each value, including the property name. However, it should be noted that some properties support encoding multiple values in a single property by separating the values with a COMMA character (US-ASCII decimal 44). Individual property definitions should be consulted for determining whether a specific property allows multiple values and in which of these two forms. 4.1.3 Binary Content Binary content information in an iCalendar object SHOULD be referenced using a URI within a property value. That is the binary content information SHOULD be placed in an external MIME entity that can be referenced by a URI from within the iCalendar object. In applications where this is not feasible, binary content information can be included within an iCalendar object, but only after first encoding it into text using the "BASE64" encoding method defined in [RFC 2045]. Inline binary contact SHOULD only be used in applications whose special circumstances demand that an iCalendar object be expressed as a single entity. A property containing inline binary content information MUST specify the "ENCODING" property parameter. Binary content information placed external to the iCalendar object MUST be referenced by a uniform resource identifier (URI). The following example specifies an "ATTACH" property that references an attachment external to the iCalendar object with a URI reference: ATTACH:http://xyz.com/public/quarterly-report.doc The following example specifies an "ATTACH" property with inline binary encoded content information: ATTACH;FMTTYPE=image/basic;ENCODING=BASE64;VALUE=BINARY: MIICajCCAdOgAwIBAgICBEUwDQYJKoZIhvcNAQEEBQAwdzELMAkGA1U EBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlIENvbW11bmljYXRpb25zIE <...remainder of "BASE64" encoded binary data...> 4.1.4 Character Set There is not a property parameter to declare the character set used in a property value. The default character set for an iCalendar object is UTF-8 as defined in [RFC 2279]. The "charset" Content-Type parameter can be used in MIME transports to specify any other IANA registered character set. Dawson/Stenerson 16 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.2 Property Parameters A property can have attributes associated with it. These "property parameters" contain meta-information about the property or the property value. Property parameters are provided to specify such information as the location of an alternate text representation for a property value, the language of a text property value, the data type of the property value and other attributes. Property parameter values that contain the COLON (US-ASCII decimal 58), SEMICOLON (US-ASCII decimal 59) or COMMA (US-ASCII decimal 44) character separators MUST be specified as quoted-string text values. Property parameter values MUST NOT contain the DOUBLE-QUOTE (US-ASCII decimal 22) character. The DOUBLE-QUOTE (US-ASCII decimal 22) character is used as a delimiter for parameter values that contain restricted characters or URI text. For example: DESCRIPTION;ALTREP="http://www.wiz.org":The Fall'98 Wild Wizards Conference - - Las Vegas, NV, USA Property parameter values that are not in quoted strings are case insensitive. The general property parameters defined by this memo are defined by the following notation: parameter = altrepparam ; Alternate text representation / cnparam ; Common name / cutypeparam ; Calendar user type / delfromparam ; Delegator / deltoparam ; Delegatee / dirparam ; Directory entry / encodingparam ; Inline encoding / fmttypeparam ; Format type / fbtypeparam ; Free/busy time type / languageparam ; Language for text / memberparam ; Group or list membership / partstatparam ; Participation status / rangeparam ; Recurrence identifier range / trigrelparam ; Alarm trigger relationship / reltypeparam ; Relationship type / roleparam ; Participation role / rsvpparam ; RSVP expectation / sentbyparam ; Sent by / tzidparam ; Reference to time zone object / valuetypeparam ; Property value data type / ianaparam ; Some other IANA registered iCalendar parameter. / xparam ; A non-standard, experimental parameter. ianaparam = iana-token "=" param-value *("," param-value) Dawson/Stenerson 17 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 xparam =x-name "=" param-value *("," param-value) 4.2.1 Alternate Text Representation Parameter Name: ALTREP Purpose: To specify an alternate text representation for the property value. Format Definition: The property parameter is defined by the following notation: altrepparam = "ALTREP" "=" DQUOTE uri DQUOTE Description: The parameter specifies a URI that points to an alternate representation for a textual property value. A property specifying this parameter MUST also include a value that reflects the default representation of the text value. The individual URI parameter values MUST each be specified in a quoted-string. Example: DESCRIPTION;ALTREP="CID:":Project XYZ Review Meeting will include the following agenda items: (a) Market Overview, (b) Finances, (c) Project Management The "ALTREP" property parameter value might point to a "text/html" content portion. Content-Type:text/html Content-Id:

Project XYZ Review Meeting will include the following agenda items:

  1. Market Overview
  2. Finances
  3. Project Management

4.2.2 Common Name Parameter Name: CN Purpose: To specify the common name to be associated with the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: cnparam = "CN" "=" param-value Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter specifies the common name to be associated with the calendar user specified by the property. The Dawson/Stenerson 18 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 parameter value is text. The parameter value can be used for display text to be associated with the calendar address specified by the property. Example: ORGANIZER;CN="John Smith":MAILTO:jsmith@host.com 4.2.3 Calendar User Type Parameter Name: CUTYPE Purpose: To specify the type of calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: cutypeparam = "CUTYPE" "=" ("INDIVIDUAL" ; An individual / "GROUP" ; A group of individuals / "RESOURCE" ; A physical resource / "ROOM" ; A room resource / "UNKNOWN" ; Otherwise not known / x-name ; Experimental type / iana-token) ; Other IANA registered ; type ; Default is INDIVIDUAL Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter identifies the type of calendar user specified by the property. If not specified on a property that allows this parameter, the default is INDIVIDUAL. Example: ATTENDEE;CUTYPE=GROUP:MAILTO:ietf-calsch@imc.org 4.2.4 Delegators Parameter Name: DELEGATED-FROM Purpose: To specify the calendar users that have delegated their participation to the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: delfromparam = "DELEGATED-FROM" "=" DQUOTE cal-address DQUOTE *("," DQUOTE cal-address DQUOTE) Description: This parameter can be specified on properties with a CAL-ADDRESS value type. This parameter can be specified on a property Dawson/Stenerson 19 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 that has a value type of calendar address. This parameter specifies those calendar uses that have delegated their participation in a group scheduled event or to-do to the calendar user specified by the property. The value MUST be a MAILTO URI as defined in [RFC 1738]. The individual calendar address parameter values MUST each be specified in a quoted-string. Example: ATTENDEE;DELEGATED-FROM="MAILTO:jsmith@host.com":MAILTO: jdoe@host.com 4.2.5 Delegatees Parameter Name: DELEGATED-TO Purpose: To specify the calendar users to whom the calendar user specified by the property has delegated participation. Format Definition: The property parameter is defined by the following notation: deltoparam = "DELEGATED-TO" "=" DQUOTE cal-address DQUOTE *("," DQUOTE cal-address DQUOTE) Description: This parameter can be specified on properties with a CAL-ADDRESS value type. This parameter specifies those calendar users whom have been delegated participation in a group scheduled event or to-do by the calendar user specified by the property. The value MUST be a MAILTO URI as defined in [RFC 1738]. The individual calendar address parameter values MUST each be specified in a quoted-string. Example: ATTENDEE;DELEGATED-TO="MAILTO:jdoe@host.com","MAILTO:jqpublic@ host.com":MAILTO:jsmith@host.com 4.2.6 Directory Entry Reference Parameter Name: DIR Purpose: To specify reference to a directory entry associated with the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: dirparam = "DIR" "=" DQUOTE uri DQUOTE Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter specifies a reference to the directory entry associated with the calendar user specified by the Dawson/Stenerson 20 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 property. The parameter value is a URI. The individual URI parameter values MUST each be specified in a quoted-string. Example: ORGANIZER;DIR="ldap://host.com:6666/o=eDABC%20Industries,c=3DUS?? (cn=3DBJim%20Dolittle)":MAILTO:jimdo@host1.com 4.2.7 Inline Encoding Parameter Name: ENCODING Purpose: To specify an alternate inline encoding for the property value. Format Definition: The property parameter is defined by the following notation: encodingparam = "ENCODING" "=" ("8BIT" ; "8bit" text encoding is defined in [RFC 2045] / "BASE64" ; "BASE64" binary encoding format is defined in [RFC 2045] / iana-token ; Some other IANA registered iCalendar encoding type / x-name) ; A non-standard, experimental encoding type Description: The property parameter identifies the inline encoding used in a property value. The default encoding is "8BIT", corresponding to a property value consisting of text. The "BASE64" encoding type corresponds to a property value encoded using the "BASE64" encoding defined in [RFC 2045]. If the value type parameter is ";VALUE=BINARY", then the inline encoding parameter MUST be specified with the value ";ENCODING=BASE64". Example: ATTACH;FMTYPE=IMAGE/JPEG;ENCODING=BASE64;VALUE=BINARY:MIICajC CAdOgAwIBAgICBEUwDQYJKoZIhvcNAQEEBQAwdzELMAkGA1UEBhMCVVMxLDA qBgNVBAoTI05ldHNjYXBlIENvbW11bmljYXRpb25zIENvcnBvcmF0aW9uMRw <...remainder of "BASE64" encoded binary data...> 4.2.8 Format Type Parameter Name: FMTTYPE Purpose: To specify the content type of a referenced object. Format Definition: The property parameter is defined by the following notation: Dawson/Stenerson 21 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 fmttypeparam = "FMTTYPE" "=" iana-token ; A IANA registered content type / x-name ; A non-standard content type Description: This parameter can be specified on properties that are used to reference an object. The parameter specifies the content type of the referenced object. For example, on the "ATTACH" property, a FTP type URI value does not, by itself, necessarily convey the type of content associated with the resource. The parameter value MUST be the TEXT for either an IANA registered content type or a non-standard content type. Example: ATTACH;FMTTYPE=application/binary:ftp://domain.com/pub/docs/ agenda.doc 4.2.9 Free/Busy Time Type Parameter Name: FBTYPE Purpose: To specify the free or busy time type. Format Definition: The property parameter is defined by the following notation: fbtypeparam = "FBTYPE" "=" ("FREE" / "BUSY" / "BUSY-UNAVAILABLE" / "BUSY-TENTATIVE" / x-name ; Some experimental iCalendar data type. / iana-token) ; Some other IANA registered iCalendar data type. Description: The parameter specifies the free or busy time type. The value FREE indicates that the time interval is free for scheduling. The value BUSY indicates that the time interval is busy because one or more events have been scheduled for that interval. The value BUSY- UNAVAILABLE indicates that the time interval is busy and that the interval can not be scheduled. The value BUSY-TENTATIVE indicates that the time interval is busy because one or more events have been tentatively scheduled for that interval. If not specified on a property that allows this parameter, the default is BUSY. Example: The following is an example of this parameter on a FREEBUSY property. FREEBUSY;FBTYPE=BUSY:19980415T133000Z/19980415T170000Z 4.2.10 Language Parameter Name: LANGUAGE Dawson/Stenerson 22 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Purpose: To specify the language for text values in a property or property parameter. Format Definition: The property parameter is defined by the following notation: languageparam = "LANGUAGE" "=" language language = Description: This parameter can be specified on properties with a text value type. The parameter identifies the language of the text in the property or property parameter value. The value of the "language" property parameter is that defined in [RFC 1766]. For transport in a MIME entity, the Content-Language header field can be used to set the default language for the entire body part. Otherwise, no default language is assumed. Example: SUMMARY;LANGUAGE=us-EN:Company Holiday Party LOCATION;LANGUAGE=en:Germany LOCATION;LANGUAGE=no:Tyskland The following example makes use of the Quoted-Printable encoding in order to represent non-ASCII characters. LOCATION;LANGUAGE=da:K=F8benhavn LOCATION;LANGUAGE=en:Copenhagen 4.2.11 Group or List Membership Parameter Name: MEMBER Purpose: To specify the group or list membership of the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: memberparam = "MEMBER" "=" DQUOTE cal-address DQUOTE *("," DQUOTE cal-address DQUOTE) Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter identifies the groups or list membership for the calendar user specified by the property. The parameter value either a single calendar address in a quoted-string or a COMMA character (US-ASCII decimal 44) list of calendar addresses, each in a quoted-string. The individual calendar address parameter values MUST each be specified in a quoted-string. Dawson/Stenerson 23 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Example: ATTENDEE;MEMBER="MAILTO:ietf-calsch@imc.org":MAILTO:jsmith@host.com ATTENDEE;MEMBER="MAILTO:projectA@host.com","MAILTO:projectB@host. com":MAILTO:janedoe@host.com 4.2.12 Participation Status Parameter Name: PARTSTAT Purpose: To specify the participation status for the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: partstatparam = "PARTSTAT" "=" ("NEEDS-ACTION" ; Event needs action / "ACCEPTED" ; Event accepted / "DECLINED" ; Event declined / "TENTATIVE" ; Event tentatively ; accepted / "DELEGATED" ; Event delegated / x-name ; Experimental status / iana-token) ; Other IANA registered ; status ; These are the participation statuses for a "VEVENT". Default is ; NEEDS-ACTION partstatparam /= "PARTSTAT" "=" ("NEEDS-ACTION" ; To-do needs action / "ACCEPTED" ; To-do accepted / "DECLINED" ; To-do declined / "TENTATIVE" ; To-do tentatively ; accepted / "DELEGATED" ; To-do delegated / "COMPLETED" ; To-do completed. ; COMPLETED property has ;date/time completed. / "IN-PROCESS" ; To-do in process of ; being completed / x-name ; Experimental status / iana-token) ; Other IANA registered ; status ; These are the participation statuses for a "VTODO". Default is ; NEEDS-ACTION partstatparam /= "PARTSTAT" "=" ("NEEDS-ACTION" ; Journal needs action / "ACCEPTED" ; Journal accepted / "DECLINED" ; Journal declined / x-name ; Experimental status Dawson/Stenerson 24 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 / iana-token) ; Other IANA registered ; status ; These are the participation statuses for a "VJOURNAL". Default is ; NEEDS-ACTION Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter identifies the participation status for the calendar user specified by the property value. The parameter values differ depending on whether they are associated with a group scheduled "VEVENT", "VTODO" or "VJOURNAL". The values MUST match one of the values allowed for the given calendar component. If not specified on a property that allows this parameter, the default value is NEEDS-ACTION. Example: ATTENDEE;PARTSTAT=DECLINED:MAILTO:jsmith@host.com 4.2.13 Recurrence Identifier Range Parameter Name: RANGE Purpose: To specify the effective range of recurrence instances from the instance specified by the recurrence identifier specified by the property. Format Definition: The property parameter is defined by the following notation: rangeparam = "RANGE" "=" ("THISANDPRIOR" ; To specify all instances prior to the recurrence identifier / "THISANDFUTURE") ; To specify the instance specified by the recurrence identifier ; and all subsequent recurrence instances Description: The parameter can be specified on a property that specifies a recurrence identifier. The parameter specifies the effective range of recurrence instances that is specified by the property. The effective range is from the recurrence identified specified by the property. If this parameter is not specified an allowed property, then the default range is the single instance specified by the recurrence identifier value of the property. The parameter value can be "THISANDPRIOR" to indicate a range defined by the recurrence identified value of the property and all prior instances. The parameter value can also be "THISANDFUTURE" to indicate a range defined by the recurrence identifier and all subsequent instances. Example: RECURRENCE-ID;RANGE=THISANDPRIOR:19980401T133000Z Dawson/Stenerson 25 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 4.2.14 Alarm Trigger Relationship Parameter Name: RELATED Purpose: To specify the relationship of the alarm trigger with respect to the start or end of the calendar component. Format Definition: The property parameter is defined by the following notation: trigrelparam = "RELATED" "=" ("START" ; Trigger off of start / "END") ; Trigger off of end Description: The parameter can be specified on properties that specify an alarm trigger with a DURATION value type. The parameter specifies whether the alarm will trigger relative to the start or end of the calendar component. The parameter value START will set the alarm to trigger off the start of the calendar component; the parameter value END will set the alarm to trigger off the end of the calendar component. If the parameter is not specified on an allowable property, then the default is START. Example: TRIGGER;RELATED=END:PT5M 4.2.15 Relationship Type Parameter Name: RELTYPE Purpose: To specify the type of hierarchical relationship associated with the calendar component specified by the property. Format Definition: The property parameter is defined by the following notation: reltypeparam = "RELTYPE" "=" ("PARENT" ; Parent relationship. Default. / "CHILD" ; Child relationship / "SIBLING ; Sibling relationship / iana-token ; Some other IANA registered ; iCalendar relationship type / x-name) ; A non-standard, experimental ; relationship type Description: This parameter can be specified on a property that references another related calendar. The parameter specifies the hierarchical relationship type of the calendar component referenced by the property. The parameter value can be PARENT, to indicate that the referenced calendar component is a superior of calendar component; CHILD to indicate that the referenced calendar component is a subordinate of the calendar component; SIBLING to indicate that Dawson/Stenerson 26 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 the referenced calendar component is a peer of the calendar component. If this parameter is not specified on an allowable property, the default relationship type is PARENT. Example: RELATED-TO;RELTYPE=SIBLING:<19960401-080045-4000F192713@host.com> 4.2.16 Participation Role Parameter Name: ROLE Purpose: To specify the participation role for the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: roleparam = "ROLE" "=" ("CHAIR" ; Indicates chair of the ; calendar entity / "REQ-PARTICIPANT" ; Indicates a participant whose ; participation is required / "OPT-PARTICIPANT" ; Indicates a participant whose ; participation is optional / "NON-PARTICIPANT" ; Indicates a participant who is ; copied for information ; purposes only / x-name ; Experimental role / iana-token) ; Other IANA role ; Default is REQ-PARTICIPANT Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter specifies the participation role for the calendar user specified by the property in the group schedule calendar component. If not specified on a property that allows this parameter, the default value is REQ-PARTICIPANT. Example: ATTENDEE;ROLE=CHAIR:MAILTO:mrbig@host.com 4.2.17 RSVP Expectation Parameter Name: RSVP Purpose: To specify whether there is an expectation of a favor of a reply from the calendar user specified by the property value. Format Definition: The property parameter is defined by the following notation: Dawson/Stenerson 27 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 rsvpparam = "RSVP" "=" ("TRUE" / "FALSE") ; Default is FALSE Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter identifies the expectation of a reply from the calendar user specified by the property value. This parameter is used by the "Organizer" to request a participation status reply from an "Attendee" of a group scheduled event or to-do. If not specified on a property that allows this parameter, the default value is FALSE. Example: ATTENDEE;RSVP=TRUE:MAILTO:jsmith@host.com 4.2.18 Sent By Parameter Name: SENT-BY Purpose: To specify the calendar user that is acting on behalf of the calendar user specified by the property. Format Definition: The property parameter is defined by the following notation: sentbyparam = "SENT-BY" "=" DQUOTE cal-address DQUOTE Description: This parameter can be specified on properties with a CAL-ADDRESS value type. The parameter specifies the calendar user that is acting on behalf of the calendar user specified by the property. The parameter value MUST be a MAILTO URI as defined in [RFC 1738]. The individual calendar address parameter values MUST each be specified in a quoted-string. Example: ORGANIZER;SENT-BY:"MAILTO:sray@host.com":MAILTO:jsmith@host.com 4.2.19 Time Zone Identifier Parameter Name: TZID Purpose: To specify the identifier for the time zone definition for a time component in the property value. Format Definition: This property parameter is defined by the following notation: tzidparam = "TZID" "=" [tzidprefix] paramtext CRLF tzidprefix = "/" Dawson/Stenerson 28 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Description: The parameter MUST be specified on the "DTSTART", "DTEND", "DUE", "EXDATE" and "RDATE" properties when either a DATE- TIME or TIME value type is specified and when the value is not either a UTC or a "floating" time. Refer to the DATE-TIME or TIME value type definition for a description of UTC and "floating time" formats. This property parameter specifies a text value which uniquely identifies the "VTIMEZONE" calendar component to be used when evaluating the time portion of the property. The value of the TZID property parameter will be equal to the value of the TZID property for the matching time zone definition. An individual "VTIMEZONE" calendar component MUST be specified for each unique "TZID" parameter value specified in the iCalendar object. The parameter MUST be specified on properties with a DATE-TIME value if the DATE-TIME is not either a UTC or a "floating" time. The presence of the SOLIDUS character (US-ASCII decimal 47) as a prefix, indicates that this TZID represents a unique ID in a globally defined time zone registry (when such registry is defined). Note: This document does not define a naming convention for time zone identifiers. Implementers may want to use the naming conventions defined in existing time zone specifications such as the public-domain Olson database [TZ]. The specification of globally unique time zone identifiers is not addressed by this document and is left for future study. The following are examples of this property parameter: DTSTART;TZID=US-Eastern:19980119T020000 DTEND;TZID=US-Eastern:19980119T030000 The TZID property parameter MUST NOT be applied to DATE-TIME or TIME properties whose time values are specified in UTC. The use of local time in a DATE-TIME or TIME value without the TZID property parameter is to be interpreted as a local time value, regardless of the existence of "VTIMEZONE" calendar components in the iCalendar object. For more information see the sections on the data types DATE-TIME and TIME. 4.2.20 Value Data Types Parameter Name: VALUE Purpose: To explicitly specify the data type format for a property value. Format Definition: The "VALUE" property parameter is defined by the following notation: Dawson/Stenerson 29 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 valuetypeparam = "VALUE" "=" valuetype valuetype = ("BINARY" / "BOOLEAN" / "CAL-ADDRESS" / "DATE" / "DATE-TIME" / "DURATION" / "FLOAT" / "INTEGER" / "PERIOD" / "RECUR" / "TEXT" / "TIME" / "URI" / "UTC-OFFSET" / x-name ; Some experimental iCalendar data type. / iana-token) ; Some other IANA registered iCalendar data type. Description: The parameter specifies the data type and format of the property value. The property values MUST be of a single value type. For example, a "RDATE" property cannot have a combination of DATE- TIME and TIME value types. If the property's value is the default value type, then this parameter need not be specified. However, if the property's default value type is overridden by some other allowable value type, then this parameter MUST be specified. 4.3 Property Value Data Types The properties in an iCalendar object are strongly typed. The definition of each property restricts the value to be one of the value data types, or simply value types, defined in this section. The value type for a property will either be specified implicitly as the default value type or will be explicitly specified with the "VALUE" parameter. If the value type of a property is one of the alternate valid types, then it MUST be explicitly specified with the "VALUE" parameter. 4.3.1 Binary Value Name: BINARY Purpose: This value type is used to identify properties that contain a character encoding of inline binary data. For example, an inline attachment of an object code might be included in an iCalendar object. Formal Definition: The value type is defined by the following notation: Dawson/Stenerson 30 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 binary = *(4b-char) [b-end] ; A "BASE64" encoded character string, as defined by [RFC 2045]. b-end = (2b-char "==") / (3b-char "=") b-char = ALPHA / DIGIT / "+" / "/" Description: Property values with this value type MUST also include the inline encoding parameter sequence of ";ENCODING=BASE64". That is, all inline binary data MUST first be character encoded using the "BASE64" encoding method defined in [RFC 2045]. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: The following is an abridged example of a "BASE64" encoded binary value data. ATTACH;VALUE=BINARY;ENCODING=BASE64:MIICajCCAdOgAwIBAgICBEUwDQY JKoZIhvcNAQEEBQAwdzELMAkGA1UEBhMCVVMxLDAqBgNVBAoTI05ldHNjYXBlI ENvbW11bmljYXRpb25zIENvcnBvcmF0aW9uMRwwGgYDVQQLExNJbmZv <...remainder of "BASE64" encoded binary data...> 4.3.2 Boolean Value Name: BOOLEAN Purpose: This value type is used to identify properties that contain either a "TRUE" or "FALSE" Boolean value. Formal Definition: The value type is defined by the following notation: boolean = "TRUE" / "FALSE" Description: These values are case insensitive text. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: The following is an example of a hypothetical property that has a BOOLEAN value type: GIBBERISH:TRUE 4.3.3 Calendar User Address Value Name: CAL-ADDRESS Purpose: This value type is used to identify properties that contain a calendar user address. Formal Definition: The value type is as defined by the following notation: Dawson/Stenerson 31 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 cal-address = uri Description: The value is a URI as defined by [RFC 1738] or any other IANA registered form for a URI. When used to address an Internet email transport address for a calendar user, the value MUST be a MAILTO URI, as defined by [RFC 1738]. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: ATTENDEE:MAILTO:jane_doe@host.com 4.3.4 Date Value Name: DATE Purpose: This value type is used to identify values that contain a calendar date. Formal Definition: The value type is defined by the following notation: date = date-value date-value = date-fullyear date-month date-mday date-fullyear = 4DIGIT date-month = 2DIGIT ;01-12 date-mday = 2DIGIT ;01-28, 01-29, 01-30, 01-31 ;based on month/year Description: If the property permits, multiple "date" values are specified as a COMMA character (US-ASCII decimal 44) separated list of values. The format for the value type is expressed as the [ISO 8601] complete representation, basic format for a calendar date. The textual format specifies a four-digit year, two-digit month, and two- digit day of the month. There are no separator characters between the year, month and day component text. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: The following represents July 14, 1997: 19970714 4.3.5 Date-Time Value Name: DATE-TIME Purpose: This value type is used to identify values that specify a precise calendar date and time of day. Dawson/Stenerson 32 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Formal Definition: The value type is defined by the following notation: date-time = date "T" time ;As specified in the date and time ;value definitions Description: If the property permits, multiple "date-time" values are specified as a COMMA character (US-ASCII decimal 44) separated list of values. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. The "DATE-TIME" data type is used to identify values that contain a precise calendar date and time of day. The format is based on the [ISO 8601] complete representation, basic format for a calendar date and time of day. The text format is a concatenation of the "date", followed by the LATIN CAPITAL LETTER T character (US-ASCII decimal 84) time designator, followed by the "time" format. The "DATE-TIME" data type expresses time values in three forms: The form of date and time with UTC offset MUST NOT be used. For example, the following is not valid for a date-time value: DTSTART:19980119T230000-0800 ;Invalid time format FORM #1: DATE WITH LOCAL TIME The date with local time form is simply a date-time value that does not contain the UTC designator nor does it reference a time zone. For example, the following represents Janurary 18, 1998, at 11 PM: DTSTART:19980118T230000 Date-time values of this type are said to be "floating" and are not bound to any time zone in particular. They are used to represent the same hour, minute, and second value regardless of which time zone is currently being observed. For example, an event can be defined that indicates that an individual will be busy from 11:00 AM to 1:00 PM every day, no matter which time zone the person is in. In these cases, a local time can be specified. The recipient of an iCalendar object with a property value consisting of a local time, without any relative time zone information, SHOULD interpret the value as being fixed to whatever time zone the ATTENDEE is in at any given moment. This means that two ATTENDEEs, in different time zones, receiving the same event definition as a floating time, may be participating in the event at different actual times. Floating time SHOULD only be used where that is the reasonable behavior. In most cases, a fixed time is desired. To properly communicate a fixed time in a property value, either UTC time or local time with time zone reference MUST be specified. Dawson/Stenerson 33 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 The use of local time in a DATE-TIME value without the TZID property parameter is to be interpreted as floating time, regardless of the existence of "VTIMEZONE" calendar components in the iCalendar object. FORM #2: DATE WITH UTC TIME The date with UTC time, or absolute time, is identified by a LATIN CAPITAL LETTER Z suffix character (US-ASCII decimal 90), the UTC designator, appended to the time value. For example, the following represents January 19, 1998, at 0700 UTC: DTSTART:19980119T070000Z The TZID property parameter MUST NOT be applied to DATE-TIME properties whose time values are specified in UTC. FORM #3: DATE WITH LOCAL TIME AND TIME ZONE REFERENCE The date and local time with reference to time zone information is identified by the use the TZID property parameter to reference the appropriate time zone definition. TZID is discussed in detail in the section on Time Zone. For example, the following represents 2 AM in New York on Janurary 19, 1998: DTSTART;TZID=US-Eastern:19980119T020000 Example: The following represents July 14, 1997, at 1:30 PM in New York City in each of the three time formats, using the "DTSTART" property. DTSTART:19970714T133000 ;Local time DTSTART:19970714T173000Z ;UTC time DTSTART;TZID=US-Eastern:19970714T133000 ;Local time and time ; zone reference A time value MUST ONLY specify 60 seconds when specifying the periodic "leap second" in the time value. For example: COMPLETED:19970630T235960Z 4.3.6 Duration Value Name: DURATION Purpose: This value type is used to identify properties that contain a duration of time. Formal Definition: The value type is defined by the following notation: dur-value = (["+"] / "-") "P" (dur-date / dur-time / dur-week) Dawson/Stenerson 34 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 dur-date = dur-day [dur-time] dur-time = "T" (dur-hour / dur-minute / dur-second) dur-week = 1*DIGIT "W" dur-hour = 1*DIGIT "H" [dur-minute] dur-minute = 1*DIGIT "M" [dur-second] dur-second = 1*DIGIT "S" dur-day = 1*DIGIT "D" Description: If the property permits, multiple "duration" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. The format is expressed as the [ISO 8601] basic format for the duration of time. The format can represent durations in terms of weeks, days, hours, minutes, and seconds. No additional content value encoding (i.e., BACKSLASH character encoding) are defined for this value type. Example: A duration of 15 days, 5 hours and 20 seconds would be: P15DT5H0M20S A duration of 7 weeks would be: P7W 4.3.7 Float Value Name: FLOAT Purpose: This value type is used to identify properties that contain a real number value. Formal Definition: The value type is defined by the following notation: float = (["+"] / "-") 1*DIGIT ["." 1*DIGIT] Description: If the property permits, multiple "float" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: 1000000.0000001 1.333 -3.14 4.3.8 Integer Value Name:INTEGER Dawson/Stenerson 35 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Purpose: This value type is used to identify properties that contain a signed integer value. Formal Definition: The value type is defined by the following notation: integer = (["+"] / "-") 1*DIGIT Description: If the property permits, multiple "integer" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. The valid range for "integer" is -2147483648 to 2147483647. If the sign is not specified, then the value is assumed to be positive. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: 1234567890 -1234567890 +1234567890 432109876 4.3.9 Period of Time Value Name: PERIOD Purpose: This value type is used to identify values that contain a precise period of time. Formal Definition: The data type is defined by the following notation: period = period-explicit / period-start period-explicit = date-time "/" date-time ; [ISO 8601] complete representation basic format for a period of ; time consisting of a start and end. The start MUST be before the ; end. period-start = date-time "/" dur-value ; [ISO 8601] complete representation basic format for a period of ; time consisting of a start and positive duration of time. Description: If the property permits, multiple "period" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. There are two forms of a period of time. First, a period of time is identified by its start and its end. This format is expressed as the [ISO 8601] complete representation, basic format for "DATE-TIME" start of the period, followed by a SOLIDUS character (US- ASCII decimal 47), followed by the "DATE-TIME" of the end of the period. The start of the period MUST be before the end of the period. Dawson/Stenerson 36 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Second, a period of time can also be defined by a start and a positive duration of time. The format is expressed as the [ISO 8601] complete representation, basic format for the "DATE-TIME" start of the period, followed by a SOLIDUS character (US-ASCII decimal 47), followed by the [ISO 8601] basic format for "DURATION" of the period. Example: The period starting at 18:00:00 UTC, on January 1, 1997 and ending at 07:00:00 UTC on January 2, 1997 would be: 19970101T180000Z/19970102T070000Z The period start at 18:00:00 on January 1, 1997 and lasting 5 hours and 30 minutes would be: 19970101T180000Z/PT5H30M No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. 4.3.10 Recurrence Rule Value Name: RECUR Purpose: This value type is used to identify properties that contain a recurrence rule specification. Formal Definition: The value type is defined by the following notation: recur = "FREQ"=freq *( ; either UNTIL or COUNT may appear in a 'recur', ; but UNTIL and COUNT MUST NOT occur in the same 'recur' ( ";" "UNTIL" "=" enddate ) / ( ";" "COUNT" "=" 1*DIGIT ) / ; the rest of these keywords are optional, ; but MUST NOT occur more than once ( ";" "INTERVAL" "=" 1*DIGIT ) / ( ";" "BYSECOND" "=" byseclist ) / ( ";" "BYMINUTE" "=" byminlist ) / ( ";" "BYHOUR" "=" byhrlist ) / ( ";" "BYDAY" "=" bywdaylist ) / ( ";" "BYMONTHDAY" "=" bymodaylist ) / ( ";" "BYYEARDAY" "=" byyrdaylist ) / ( ";" "BYWEEKNO" "=" bywknolist ) / ( ";" "BYMONTH" "=" bymolist ) / ( ";" "BYSETPOS" "=" bysplist ) / ( ";" "WKST" "=" weekday ) / ( ";" x-name "=" text ) ) Dawson/Stenerson 37 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 freq = "SECONDLY" / "MINUTELY" / "HOURLY" / "DAILY" / "WEEKLY" / "MONTHLY" / "YEARLY" enddate = date enddate =/ date-time ;An UTC value byseclist = seconds / ( seconds *("," seconds) ) seconds = 1DIGIT / 2DIGIT ;0 to 59 byminlist = minutes / ( minutes *("," minutes) ) minutes = 1DIGIT / 2DIGIT ;0 to 59 byhrlist = hour / ( hour *("," hour) ) hour = 1DIGIT / 2DIGIT ;0 to 23 bywdaylist = weekdaynum / ( weekdaynum *("," weekdaynum) ) weekdaynum = [([plus] ordwk / minus ordwk)] weekday plus = "+" minus = "-" ordwk = 1DIGIT / 2DIGIT ;1 to 53 weekday = "SU" / "MO" / "TU" / "WE" / "TH" / "FR" / "SA" ;Corresponding to SUNDAY, MONDAY, TUESDAY, WEDNESDAY, THURSDAY, ;FRIDAY, SATURDAY and SUNDAY days of the week. bymodaylist = monthdaynum / ( monthdaynum *("," monthdaynum) ) monthdaynum = ([plus] ordmoday) / (minus ordmoday) ordmoday = 1DIGIT / 2DIGIT ;1 to 31 byyrdaylist = yeardaynum / ( yeardaynum *("," yeardaynum) ) yeardaynum = ([plus] ordyrday) / (minus ordyrday) ordyrday = 1DIGIT / 2DIGIT / 3DIGIT ;1 to 366 bywknolist = weeknum / ( weeknum *("," weeknum) ) weeknum = ([plus] ordwk) / (minus ordwk) bymolist = monthnum / ( monthnum *("," monthnum) ) monthnum = 1DIGIT / 2DIGIT ;1 to 12 bysplist = setposday / ( setposday *("," setposday) ) Dawson/Stenerson 38 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 setposday = yeardaynum Description: If the property permits, multiple "recur" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. The value type is a structured value consisting of a list of one or more recurrence grammar parts. Each rule part is defined by a NAME=VALUE pair. The rule parts are separated from each other by the SEMICOLON character (US-ASCII decimal 59). The rule parts are not ordered in any particular sequence. Individual rule parts MUST only be specified once. The FREQ rule part identifies the type of recurrence rule. This rule part MUST be specified in the recurrence rule. Valid values include SECONDLY, to specify repeating events based on an interval of a second or more; MINUTELY, to specify repeating events based on an interval of a minute or more; HOURLY, to specify repeating events based on an interval of an hour or more; DAILY, to specify repeating events based on an interval of a day or more; WEEKLY, to specify repeating events based on an interval of a week or more; MONTHLY, to specify repeating events based on an interval of a month or more; and YEARLY, to specify repeating events based on an interval of a year or more. The INTERVAL rule part contains a positive integer representing how often the recurrence rule repeats. The default value is "1", meaning every second for a SECONDLY rule, or every minute for a MINUTELY rule, every hour for an HOURLY rule, every day for a DAILY rule, every week for a WEEKLY rule, every month for a MONTHLY rule and every year for a YEARLY rule. The UNTIL rule part defines a date-time value which bounds the recurrence rule in an inclusive manner. If the value specified by UNTIL is synchronized with the specified recurrence, this date or date-time becomes the last instance of the recurrence. If specified as a date-time value, then it MUST be specified in an UTC time format. If not present, and the COUNT rule part is also not present, the RRULE is considered to repeat forever. The COUNT rule part defines the number of occurrences at which to range-bound the recurrence. The "DTSTART" property value, if specified, counts as the first occurrence. The BYSECOND rule part specifies a COMMA character (US-ASCII decimal 44) separated list of seconds within a minute. Valid values are 0 to 59. The BYMINUTE rule part specifies a COMMA character (US-ASCII decimal 44) separated list of minutes within an hour. Valid values are 0 to 59. The BYHOUR rule part specifies a COMMA character (US- ASCII decimal 44) separated list of hours of the day. Valid values are 0 to 23. The BYDAY rule part specifies a COMMA character (US-ASCII decimal 44) separated list of days of the week; MO indicates Monday; TU indicates Tuesday; WE indicates Wednesday; TH indicates Thursday; FR indicates Friday; SA indicates Saturday; SU indicates Sunday. Dawson/Stenerson 39 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Each BYDAY value can also be preceded by a positive (+n) or negative (-n) integer. If present, this indicates the nth occurrence of the specific day within the MONTHLY or YEARLY RRULE. For example, within a MONTHLY rule, +1MO (or simply 1MO) represents the first Monday within the month, whereas -1MO represents the last Monday of the month. If an integer modifier is not present, it means all days of this type within the specified frequency. For example, within a MONTHLY rule, MO represents all Mondays within the month. The BYMONTHDAY rule part specifies a COMMA character (ASCII decimal 44) separated list of days of the month. Valid values are 1 to 31 or -31 to -1. For example, -10 represents the tenth to the last day of the month. The BYYEARDAY rule part specifies a COMMA character (US-ASCII decimal 44) separated list of days of the year. Valid values are 1 to 366 or -366 to -1. For example, -1 represents the last day of the year (December 31st) and -306 represents the 306th to the last day of the year (March 1st). The BYWEEKNO rule part specifies a COMMA character (US-ASCII decimal 44) separated list of ordinals specifying weeks of the year. Valid values are 1 to 53 or -53 to -1. This corresponds to weeks according to week numbering as defined in [ISO 8601]. A week is defined as a seven day period, starting on the day of the week defined to be the week start (see WKST). Week number one of the calendar year is the first week which contains at least four (4) days in that calendar year. This rule part is only valid for YEARLY rules. For example, 3 represents the third week of the year. Note: Assuming a Monday week start, week 53 can only occur when Thursday is January 1 or if it is a leap year and Wednesday is January 1. The BYMONTH rule part specifies a COMMA character (US-ASCII decimal 44) separated list of months of the year. Valid values are 1 to 12. The WKST rule part specifies the day on which the workweek starts. Valid values are MO, TU, WE, TH, FR, SA and SU. This is significant when a WEEKLY RRULE has an interval greater than 1, and a BYDAY rule part is specified. This is also significant when in a YEARLY RRULE when a BYWEEKNO rule part is specified. The default value is MO. The BYSETPOS rule part specifies a COMMA character (US-ASCII decimal 44) separated list of values which corresponds to the nth occurrence within the set of events specified by the rule. Valid values are 1 to 366 or -366 to -1. It MUST only be used in conjunction with another BYxxx rule part. For example "the last work day of the month" could be represented as: RRULE:FREQ=MONTHLY;BYDAY=MO,TU,WE,TH,FR;BYSETPOS=-1 Dawson/Stenerson 40 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Each BYSETPOS value can include a positive (+n) or negative (-n) integer. If present, this indicates the nth occurrence of the specific occurrence within the set of events specified by the rule. If BYxxx rule part values are found which are beyond the available scope (ie, BYMONTHDAY=30 in February), they are simply ignored. Information, not contained in the rule, necessary to determine the various recurrence instance start time and dates are derived from the Start Time (DTSTART) entry attribute. For example, "FREQ=YEARLY;BYMONTH=1" doesn’t specify a specific day within the month or a time. This information would be the same as what is specified for DTSTART. BYxxx rule parts modify the recurrence in some manner. BYxxx rule parts for a period of time which is the same or greater than the frequency generally reduce or limit the number of occurrences of the recurrence generated. For example, "FREQ=DAILY;BYMONTH=1" reduces the number of recurrence instances from all days (if BYMONTH tag is not present) to all days in January. BYxxx rule parts for a period of time less than the frequency generally increase or expand the number of occurrences of the recurrence. For example, "FREQ=YEARLY;BYMONTH=1,2" increases the number of days within the yearly recurrence set from 1 (if BYMONTH tag is not present) to 2. If multiple BYxxx rule parts are specified, then after evaluating the specified FREQ and INTERVAL rule parts, the BYxxx rule parts are applied to the current set of evaluated occurrences in the following order: BYMONTH, BYWEEKNO, BYYEARDAY, BYMONTHDAY, BYDAY, BYHOUR, BYMINUTE, BYSECOND and BYSETPOS; then COUNT and UNTIL are evaluated. Here is an example of evaluating multiple BYxxx rule parts. DTSTART;TZID=US-Eastern:19970105T083000 RRULE:FREQ=YEARLY;INTERVAL=2;BYMONTH=1;BYDAY=SU;BYHOUR=8,9; BYMINUTE=30 First, the "INTERVAL=2" would be applied to "FREQ=YEARLY" to arrive at "every other year". Then, "BYMONTH=1" would be applied to arrive at "every January, every other year". Then, "BYDAY=SU" would be applied to arrive at "every Sunday in January, every other year". Then, "BYHOUR=8,9" would be applied to arrive at "every Sunday in January at 8 AM and 9 AM, every other year". Then, "BYMINUTE=30" would be applied to arrive at "every Sunday in January at 8:30 AM and 9:30 AM, every other year". Then, lacking information from RRULE, the second is derived from DTSTART, to end up in "every Sunday in January at 8:30:00 AM and 9:30:00 AM, every other year". Similarly, if the BYMINUTE, BYHOUR, BYDAY, BYMONTHDAY or BYMONTH rule part were missing, the appropriate minute, hour, day or month would have been retrieved from the "DTSTART" property. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Dawson/Stenerson 41 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Example: The following is a rule which specifies 10 meetings which occur every other day: FREQ=DAILY;COUNT=10;INTERVAL=2 There are other examples specified in the "RRULE" specification. 4.3.11 Text Value Name: TEXT Purpose This value type is used to identify values that contain human readable text. Formal Definition: The character set supported by this revision of iCalendar is UTF-8 and the valid subsets thereof. The value type is defined by the following notation. text = *(TSAFE-CHAR / ":" / DQUOTE / ESCAPED-CHAR) ; Folded according to description above ESCAPED-CHAR = "\\" / "\;" / "\," / "\N" / "\n") ; \\ encodes \, \N or \n encodes newline ; \; encodes ;, \, encodes , TSAFE-CHAR = %x20-21 / %x23-2B / %x2D-39 / %x3C-5B %x5D-7E / NON-US-ASCII ; Any character except CTLs not needed by the current ; character set, DQUOTE, ";", ":", "\", "," Note: Certain other character sets may require modification of the above definitions, but this is beyond the scope of this document. Description: If the property permits, multiple "text" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. The language in which the text is represented can be controlled by the "LANGUAGE" property parameter. An intentional formatted text line break MUST only be included in a "TEXT" property value by representing the line break with the character sequence of BACKSLASH (US-ASCII decimal 92), followed by a LATIN SMALL LETTER N (US-ASCII decimal 110) or a LATIN CAPITAL LETTER N (US-ASCII decimal 78), that is "\n" or "\N". The "TEXT" property values may also contain special characters that are used to signify delimiters, such as a COMMA character for lists of values or a SEMICOLON character for structured values. In order to support the inclusion of these special characters in "TEXT" property values, they MUST be escaped with a BACKSLASH character. A BACKSLASH character (US-ASCII decimal 92) in a "TEXT" property value MUST be escaped with another BACKSLASH character. A COMMA character in a Dawson/Stenerson 42 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 "TEXT" property value MUST be escaped with a BACKSLASH character (US- ASCII decimal 92). A SEMICOLON character in a "TEXT" property value MUST be escaped with a BACKSLASH character (US-ASCII decimal 92). However, a COLON character in a "TEXT" property value SHALL NOT be escaped with a BACKSLASH character.Example: A multiple line value of: Project XYZ Final Review Conference Room - 3B Come Prepared. would be represented as: Project XYZ Final Review\nConference Room - 3B\nCome Prepared. 4.3.12 Time Value Name: TIME Purpose: This value type is used to identify values that contain a time of day. Formal Definition: The data type is defined by the following notation: time = time-hour time-minute time-second [time-utc] time-hour = 2DIGIT ;00-23 time-minute = 2DIGIT ;00-59 time-second = 2DIGIT ;00-60 ;The "60" value is used to account for "leap" seconds. time-utc = "Z" Description: If the property permits, multiple "time" values are specified by a COMMA character (US-ASCII decimal 44) separated list of values. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. The "TIME" data type is used to identify values that contain a time of day. The format is based on the [ISO 8601] complete representation, basic format for a time of day. The text format consists of a two-digit 24-hour of the day (i.e., values 0-23), two- digit minute in the hour (i.e., values 0-59), and two-digit seconds in the minute (i.e., values 0-60). The seconds value of 60 MUST only to be used to account for "leap" seconds. Fractions of a second are not supported by this format. In parallel to the "DATE-TIME" definition above, the "TIME" data type expresses time values in three forms: The form of time with UTC offset MUST NOT be used. For example, the following is NOT VALID for a time value: Dawson/Stenerson 43 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 230000-0800 ;Invalid time format FORM #1 LOCAL TIME The local time form is simply a time value that does not contain the UTC designator nor does it reference a time zone. For example, 11:00 PM: 230000 Time values of this type are said to be "floating" and are not bound to any time zone in particular. They are used to represent the same hour, minute, and second value regardless of which time zone is currently being observed. For example, an event can be defined that indicates that an individual will be busy from 11:00 AM to 1:00 PM every day, no matter which time zone the person is in. In these cases, a local time can be specified. The recipient of an iCalendar object with a property value consisting of a local time, without any relative time zone information, SHOULD interpret the value as being fixed to whatever time zone the ATTENDEE is in at any given moment. This means that two ATTENDEEs may participate in the same event at different UTC times; floating time SHOULD only be used where that is reasonable behavior. In most cases, a fixed time is desired. To properly communicate a fixed time in a property value, either UTC time or local time with time zone reference MUST be specified. The use of local time in a TIME value without the TZID property parameter is to be interpreted as a local time value, regardless of the existence of "VTIMEZONE" calendar components in the iCalendar object. FORM #2: UTC TIME UTC time, or absolute time, is identified by a LATIN CAPITAL LETTER Z suffix character (US-ASCII decimal 90), the UTC designator, appended to the time value. For example, the following represents 07:00 AM UTC: 070000Z The TZID property parameter MUST NOT be applied to TIME properties whose time values are specified in UTC. FORM #3: LOCAL TIME AND TIME ZONE REFERENCE The local time with reference to time zone information form is identified by the use the TZID property parameter to reference the appropriate time zone definition. TZID is discussed in detail in the section on Time Zone. Dawson/Stenerson 44 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Example: The following represents 8:30 AM in New York in Winter, five hours behind UTC, in each of the three formats using the "X- TIMEOFDAY" non-standard property: X-TIMEOFDAY:083000 X-TIMEOFDAY:133000Z X-TIMEOFDAY;TZID=US-Eastern:083000 4.3.13 URI Value Name: URI Purpose: This value type is used to identify values that contain a uniform resource identifier (URI) type of reference to the property value. Formal Definition: The data type is defined by the following notation: uri = Description: This data type might be used to reference binary information, for values that are large, or otherwise undesirable to include directly in the iCalendar object. The URI value formats in RFC 1738, RFC 2111 and any other IETF registered value format can be specified. Any IANA registered URI format can be used. These include, but are not limited to, those defined in RFC 1738 and RFC 2111. When a property parameter value is a URI value type, the URI MUST be specified as a quoted-string value. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: The following is a URI for a network file: http://host1.com/my-report.txt 4.3.14 UTC Offset Value Name: UTC-OFFSET Purpose: This value type is used to identify properties that contain an offset from UTC to local time. Formal Definition: The data type is defined by the following notation: Dawson/Stenerson 45 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 utc-offset = time-numzone ;As defined above in time data type time-numzone = ("+" / "-") time-hour time-minute [time- second] Description: The PLUS SIGN character MUST be specified for positive UTC offsets (i.e., ahead of UTC). The value of "-0000" and "-000000" are not allowed. The time-second, if present, may not be 60; if absent, it defaults to zero. No additional content value encoding (i.e., BACKSLASH character encoding) is defined for this value type. Example: The following UTC offsets are given for standard time for New York (five hours behind UTC) and Geneva (one hour ahead of UTC): -0500 +0100 4.4 iCalendar Object The Calendaring and Scheduling Core Object is a collection of calendaring and scheduling information. Typically, this information will consist of a single iCalendar object. However, multiple iCalendar objects can be sequentially grouped together. The first line and last line of the iCalendar object MUST contain a pair of iCalendar object delimiter strings. The syntax for an iCalendar object is as follows: icalobject = 1*("BEGIN" ":" "VCALENDAR" CRLF icalbody "END" ":" "VCALENDAR" CRLF) The following is a simple example of an iCalendar object: BEGIN:VCALENDAR VERSION:2.0 PRODID:-//hacksw/handcal//NONSGML v1.0//EN BEGIN:VEVENT DTSTART:19970714T170000Z DTEND:19970715T035959Z SUMMARY:Bastille Day Party END:VEVENT END:VCALENDAR 4.5 Property A property is the definition of an individual attribute describing a calendar or a calendar component. A property takes the form defined by the "contentline" notation defined in section 4.1.1. The following is an example of a property: Dawson/Stenerson 46 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 DTSTART:19960415T133000Z This memo imposes no ordering of properties within an iCalendar object. Property names, parameter names and enumerated parameter values are case insensitive. For example, the property name "DUE" is the same as "due" and "Due", DTSTART;TZID=US-Eastern:19980714T120000 is the same as DtStart;TzID=US-Eastern:19980714T120000. 4.6 Calendar Components The body of the iCalendar object consists of a sequence of calendar properties and one or more calendar components. The calendar properties are attributes that apply to the calendar as a whole. The calendar components are collections of properties that express a particular calendar semantic. For example, the calendar component can specify an event, a to-do, a journal entry, time zone information, or free/busy time information, or an alarm. The body of the iCalendar object is defined by the following notation: icalbody = calprops component calprops = 2*( ; 'prodid' and 'version' are both REQUIRED, ; but MUST NOT occur more than once prodid /version / ; 'calscale' and 'method' are optional, ; but MUST NOT occur more than once calscale / method / x-prop ) component = 1*(eventc / todoc / journalc / freebusyc / / timezonec / iana-comp / x-comp) iana-comp = "BEGIN" ":" iana-token CRLF 1*contentline "END" ":" iana-token CRLF x-comp = "BEGIN" ":" x-name CRLF Dawson/Stenerson 47 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 1*contentline "END" ":" x-name CRLF An iCalendar object MUST include the "PRODID" and "VERSION" calendar properties. In addition, it MUST include at least one calendar component. Special forms of iCalendar objects are possible to publish just busy time (i.e., only a "VFREEBUSY" calendar component) or time zone (i.e., only a "VTIMEZONE" calendar component) information. In addition, a complex iCalendar object is possible that is used to capture a complete snapshot of the contents of a calendar (e.g., composite of many different calendar components). More commonly, an iCalendar object will consist of just a single "VEVENT", "VTODO" or "VJOURNAL" calendar component. 4.6.1 Event Component Component Name: "VEVENT" Purpose: Provide a grouping of component properties that describe an event. Format Definition: A "VEVENT" calendar component is defined by the following notation: eventc = "BEGIN" ":" "VEVENT" CRLF eventprop *alarmc "END" ":" "VEVENT" CRLF eventprop = *( ; the following are optional, ; but MUST NOT occur more than once class / created / description / dtstart / geo / last-mod / location / organizer / priority / dtstamp / seq / status / summary / transp / uid / url / recurid / ; either 'dtend' or 'duration' may appear in ; a 'eventprop', but 'dtend' and 'duration' ; MUST NOT occur in the same 'eventprop' dtend / duration / ; the following are optional, ; and MAY occur more than once attach / attendee / categories / comment / contact / exdate / exrule / rstatus / related / resources / rdate / rrule / x-prop ) Dawson/Stenerson 48 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 Description: A "VEVENT" calendar component is a grouping of component properties, and possibly including "VALARM" calendar components, that represents a scheduled amount of time on a calendar. For example, it can be an activity; such as a one-hour long, department meeting from 8:00 AM to 9:00 AM, tomorrow. Generally, an event will take up time on an individual calendar. Hence, the event will appear as an opaque interval in a search for busy time. Alternately, the event can have its Time Transparency set to "TRANSPARENT" in order to prevent blocking of the event in searches for busy time. The "VEVENT" is also the calendar component used to specify an anniversary or daily reminder within a calendar. These events have a DATE value type for the "DTSTART" property instead of the default data type of DATE-TIME. If such a "VEVENT" has a "DTEND" property, it MUST be specified as a DATE value also. The anniversary type of "VEVENT" can span more than one date (i.e, "DTEND" property value is set to a calendar date after the "DTSTART" property value). The "DTSTART" property for a "VEVENT" specifies the inclusive start of the event. For recurring events, it also specifies the very first instance in the recurrence set. The "DTEND" property for a "VEVENT" calendar component specifies the non-inclusive end of the event. For cases where a "VEVENT" calendar component specifies a "DTSTART" property with a DATE data type but no "DTEND" property, the events non-inclusive end is the end of the calendar date specified by the "DTSTART" property. For cases where a "VEVENT" calendar component specifies a "DTSTART" property with a DATE-TIME data type but no "DTEND" property, the event ends on the same calendar date and time of day specified by the "DTSTART" property. The "VEVENT" calendar component cannot be nested within another calendar component. However, "VEVENT" calendar components can be related to each other or to a "VTODO" or to a "VJOURNAL" calendar component with the "RELATED-TO" property. Example: The following is an example of the "VEVENT" calendar component used to represent a meeting that will also be opaque to searches for busy time: BEGIN:VEVENT UID:19970901T130000Z-123401@host.com DTSTAMP:19970901T1300Z DTSTART:19970903T163000Z DTEND:19970903T190000Z SUMMARY:Annual Employee Review CLASS:PRIVATE CATEGORIES:BUSINESS,HUMAN RESOURCES END:VEVENT The following is an example of the "VEVENT" calendar component used to represent a reminder that will not be opaque, but rather transparent, to searches for busy time: Dawson/Stenerson 49 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 BEGIN:VEVENT UID:19970901T130000Z-123402@host.com DTSTAMP:19970901T1300Z DTSTART:19970401T163000Z DTEND:19970402T010000Z SUMMARY:Laurel is in sensitivity awareness class. CLASS:PUBLIC CATEGORIES:BUSINESS,HUMAN RESOURCES TRANSP:TRANSPARENT END:VEVENT The following is an example of the "VEVENT" calendar component used to represent an anniversary that will occur annually. Since it takes up no time, it will not appear as opaque in a search for busy time; no matter what the value of the "TRANSP" property indicates: BEGIN:VEVENT UID:19970901T130000Z-123403@host.com DTSTAMP:19970901T1300Z DTSTART:19971102 SUMMARY:Our Blissful Anniversary CLASS:CONFIDENTIAL CATEGORIES:ANNIVERSARY,PERSONAL,SPECIAL OCCASION RRULE:FREQ=YEARLY END:VEVENT 4.6.2 To-do Component Component Name: VTODO Purpose: Provide a grouping of calendar properties that describe a to-do. Formal Definition: A "VTODO" calendar component is defined by the following notation: todoc = "BEGIN" ":" "VTODO" CRLF todoprop *alarmc "END" ":" "VTODO" CRLF todoprop = *( ; the following are optional, ; but MUST NOT occur more than once class / completed / created / description / dtstamp / dtstart / geo / last-mod / location / organizer / percent / priority / recurid / seq / status / summary / uid / url / ; either 'due' or 'duration' may appear in ; a 'todoprop', but 'due' and 'duration' ; MUST NOT occur in the same 'todoprop' Dawson/Stenerson 50 Expires February 1999 Internet Draft C&S Core Object Specification August 7, 1998 due / duration / ; the following are optional, ; and MAY occur more than once attach / attendee / categories / comment / contact / exdate / exrule / rstatus / related / resources / rdate / rrule / x-prop ) Description: A "VTODO" calendar component is a grouping of component properties and possibly "VALARM" calendar components that represent an action-item or assignment. For example, it can be used to represent an item of work assigned to an individual; such as "turn in travel expense today". The "VTODO" calendar component cannot be nested within another calendar component. However, "VTODO" calendar components can be related to each other or to a "VTODO" or to a "VJOURNAL" calendar component with the "RELATED-TO" property. A "VTODO" calendar component without the "DTSTART" and "DUE" (or "DURATION") properties specifies a to-do that will be associated with each successive calendar date, until it is completed. Example: The following is an example of a