Network Working Group J. Gregorio, Ed.
Internet-Draft BitWorking, Inc
Expires: December 25, 2006 B. de hOra, Ed.
Propylon Ltd.
June 23, 2006
The Atom Publishing Protocol
draft-ietf-atompub-protocol-09.txt
Status of this Memo
By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet-
Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on December 25, 2006.
Copyright Notice
Copyright (C) The Internet Society (2006).
Abstract
The Atom Publishing Protocol (APP) is an application-level protocol
for publishing and editing Web resources. The protocol is based on
HTTP transport of Atom-formatted representations. The Atom format is
documented in the Atom Syndication Format (RFC4287).
Editorial Note
Gregorio & de hOra Expires December 25, 2006 [Page 1]
Internet-Draft The Atom Publishing Protocol June 2006
To provide feedback on this Internet-Draft, join the atom-protocol
mailing list (http://www.imc.org/atom-protocol/index.html) [1].
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Notational Conventions . . . . . . . . . . . . . . . . . . . 5
3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . 6
4. Protocol Model . . . . . . . . . . . . . . . . . . . . . . . 7
5. Protocol Operations . . . . . . . . . . . . . . . . . . . . 8
5.1 Retrieving an Introspection Document . . . . . . . . . . . 8
5.2 Creating a Resource . . . . . . . . . . . . . . . . . . . 8
5.3 Editing a Resource . . . . . . . . . . . . . . . . . . . . 8
5.3.1 Retrieving a Resource . . . . . . . . . . . . . . . . 9
5.3.2 Updating a Resource . . . . . . . . . . . . . . . . . 9
5.3.3 Deleting a Resource . . . . . . . . . . . . . . . . . 9
5.4 Listing Collection Members . . . . . . . . . . . . . . . . 10
5.5 Use of HTTP Response codes . . . . . . . . . . . . . . . . 10
6. XML-related Conventions . . . . . . . . . . . . . . . . . . 11
6.1 Referring to Information Items . . . . . . . . . . . . . . 11
6.2 XML Namespace Usage . . . . . . . . . . . . . . . . . . . 11
6.3 Use of xml:base and xml:lang . . . . . . . . . . . . . . . 11
6.4 RELAX NG Schema . . . . . . . . . . . . . . . . . . . . . 12
7. Introspection Documents . . . . . . . . . . . . . . . . . . 13
7.1 Example . . . . . . . . . . . . . . . . . . . . . . . . . 13
7.2 Element Definitions . . . . . . . . . . . . . . . . . . . 14
7.2.1 The "app:service" Element . . . . . . . . . . . . . . 14
7.2.2 The "app:workspace" Element . . . . . . . . . . . . . 14
7.2.3 The "app:collection" Element . . . . . . . . . . . . . 15
7.2.4 The "app:accept" Element . . . . . . . . . . . . . . . 16
8. Collections . . . . . . . . . . . . . . . . . . . . . . . . 17
8.1 Creating resources with POST . . . . . . . . . . . . . . . 17
8.2 Example . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.3 The 'edit' Link . . . . . . . . . . . . . . . . . . . . . 19
8.4 Media Resources and Media Link Entries . . . . . . . . . . 19
8.4.1 Title: Header . . . . . . . . . . . . . . . . . . . . 20
8.4.2 Example . . . . . . . . . . . . . . . . . . . . . . . 20
8.5 Editing Entries with Foreign Markup . . . . . . . . . . . 21
9. Listing Collections . . . . . . . . . . . . . . . . . . . . 22
9.1 Collection Paging . . . . . . . . . . . . . . . . . . . . 22
10. Atom Format Link Relation Extensions . . . . . . . . . . . . 24
10.1 The "edit" Link Relation . . . . . . . . . . . . . . . . 24
10.2 The "edit-media" Link Relation . . . . . . . . . . . . . 24
11. Atom Publishing Control Extensions . . . . . . . . . . . . . 25
11.1 The Atom Publishing Control Namespace . . . . . . . . . 25
11.2 The "pub:control" Element . . . . . . . . . . . . . . . 25
11.2.1 The "pub:draft" Element . . . . . . . . . . . . . . 25
12. Securing the Atom Protocol . . . . . . . . . . . . . . . . . 26
Gregorio & de hOra Expires December 25, 2006 [Page 2]
Internet-Draft The Atom Publishing Protocol June 2006
13. Security Considerations . . . . . . . . . . . . . . . . . . 27
14. IANA Considerations . . . . . . . . . . . . . . . . . . . . 28
15. References . . . . . . . . . . . . . . . . . . . . . . . . . 30
15.1 Normative References . . . . . . . . . . . . . . . . . . 30
15.2 Informative References . . . . . . . . . . . . . . . . . 31
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . 32
A. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 33
B. RELAX NG Compact Schema . . . . . . . . . . . . . . . . . . 34
C. Revision History . . . . . . . . . . . . . . . . . . . . . . 37
Intellectual Property and Copyright Statements . . . . . . . 40
Gregorio & de hOra Expires December 25, 2006 [Page 3]
Internet-Draft The Atom Publishing Protocol June 2006
1. Introduction
The Atom Publishing Protocol is an application-level protocol for
publishing and editing Web resources using HTTP [RFC2616] and XML 1.0
[W3C.REC-xml-20040204]. The protocol supports the creation of
arbitrary web resources and provides facilities for:
o Collections: Sets of resources, which can be retrieved in whole or
in part.
o Introspection: Discovering and describing collections.
o Editing: Creating, updating and deleting resources.
Gregorio & de hOra Expires December 25, 2006 [Page 4]
Internet-Draft The Atom Publishing Protocol June 2006
2. Notational Conventions
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
Note: The Introspection Document allows the use of IRIs [RFC3987], as
well as URIs [RFC3986]. Every URI is an IRI, so any URI can be used
where an IRI is needed. How to map an IRI to a URI is specified in
Section 3.1 of Internationalized Resource Identifiers (IRIs)
[RFC3987].
Gregorio & de hOra Expires December 25, 2006 [Page 5]
Internet-Draft The Atom Publishing Protocol June 2006
3. Terminology
For convenience, this protocol can be referred to as the "Atom
Protocol" or "APP".
URI/IRI - A Uniform Resource Identifier and Internationalized
Resource Identifier. These terms and the distinction between them
are defined in [RFC3986] and [RFC3987]. Note that IRIs are mapped to
URIs before dereferencing takes place.
Resource - A network-accessible data object or service identified by
an IRI, as defined in [RFC2616]. See [W3C.REC-webarch-20041215] for
further discussion on resources.
The phrase "the URI of a document" in this specification is shorthand
for "an URI which, when dereferenced, is expected to produce that
document as a representation".
Representation - An entity included with a request or response as
defined in [RFC2616].
Collection - A resource that contains a set of member IRIs. See
Section 8.
Member - A resource whose IRI is listed in a Collection.
Introspection Document - A document that describes the location and
capabilities of one or more Collections. See Section 7.
Gregorio & de hOra Expires December 25, 2006 [Page 6]
Internet-Draft The Atom Publishing Protocol June 2006
4. Protocol Model
The Atom Publishing Protocol uses HTTP to edit and author web
resources. The Atom Protocol uses the following HTTP methods:
o GET is used to retrieve a representation of a resource or perform
a query.
o POST is used to create a new, dynamically-named resource.
o PUT is used to update a known resource.
o DELETE is used to remove a resource.
Along with operations on resources the Atom Protocol provides
structures, called Collections, for managing and organising
resources, called Members. Collections contain the IRIs of, and
metadata about, their Member resources. Atom Protocol clients can
use Introspection documents, which represent server-defined groups of
Collections, to initialize the process of creating and editing
resources.
Note that when an IRI is used for resource retrieval over HTTP, the
IRI is first converted to a URI according the procedure defined in
[RFC3987] section 3.1. The resource that the IRI locates is the same
as the one located by the URI obtained after converting the IRI.
Gregorio & de hOra Expires December 25, 2006 [Page 7]
Internet-Draft The Atom Publishing Protocol June 2006
5. Protocol Operations
5.1 Retrieving an Introspection Document
Client Server
| |
| 1.) GET to URI of Introspection Document |
|------------------------------------------>|
| |
| 2.) Introspection Document |
|<------------------------------------------|
| |
1. The client sends a GET request to the URI of the Introspection
Document.
2. The server responds with the document enumerating the IRIs of a
set of Collections and the capabilities of those Collections
supported by the server. The content of this document can vary
based on aspects of the client request, including, but not
limited to, authentication credentials.
5.2 Creating a Resource
Client Server
| |
| 1.) POST to URI of Collection |
|------------------------------------------>|
| |
| 2.) 201 Created |
|<------------------------------------------|
| |
1. The client POSTs a representation of the Member to the URI of the
collection.
2. If the Member resource was created successfully, the server
responds with a status code of 201 and a Location: header that
contains the URI of the newly created resource.
5.3 Editing a Resource
Once a resource has been created and its URI is known, that URI can
be used to retrieve, update, and delete the resource.
Gregorio & de hOra Expires December 25, 2006 [Page 8]
Internet-Draft The Atom Publishing Protocol June 2006
5.3.1 Retrieving a Resource
Client Server
| |
| 1.) GET to Member URI |
|------------------------------------------>|
| |
| 2.) Member Representation |
|<------------------------------------------|
| |
1. The client sends a GET request to the Member's URI to retrieve
its representation.
2. The server responds with the representation of the resource.
5.3.2 Updating a Resource
Client Server
| |
| 1.) PUT to Member URI |
|------------------------------------------>|
| |
| 2.) 200 OK |
|<------------------------------------------|
1. The client PUTs an updated representation to the Member's URI.
2. Upon a successful update of the resource the server responds with
a status code of 200.
5.3.3 Deleting a Resource
Client Server
| |
| 1.) DELETE to Member URI |
|------------------------------------------>|
| |
| 2.) 200 Ok |
|<------------------------------------------|
| |
1. The client sends a DELETE request to the Member's URI.
2. Upon the successful deletion of the resource the server responds
with a status code of 200.
Gregorio & de hOra Expires December 25, 2006 [Page 9]
Internet-Draft The Atom Publishing Protocol June 2006
5.4 Listing Collection Members
To list the members of a Collection the client sends a GET request to
the Collection's URI. An Atom Feed Document is returned containing
one Atom Entry for each member resource. See Section 9 and
Section 10 for a description of the feed contents.
Client Server
| |
| 1.) GET to Collection URI |
|------------------------------->|
| |
| 2.) 200 OK, Atom Feed Doc |
|<-------------------------------|
| |
1. The client sends a GET request to the Collection's URI.
2. The server responds with an Atom Feed Document containing the
IRIs of the collection members.
5.5 Use of HTTP Response codes
The Atom Protocol uses the response status codes defined in HTTP to
indicate the success or failure of an operation. Consult the HTTP
specification [RFC2616] for detailed definitions of each status code.
It is RECOMMENDED that entities contained within HTTP 4xx and 5xx
responses include a human-readable explanation of the error.
Gregorio & de hOra Expires December 25, 2006 [Page 10]
Internet-Draft The Atom Publishing Protocol June 2006
6. XML-related Conventions
The Atom Protocol Introspection format is specified in terms of the
XML Information Set [W3C.REC-xml-infoset-20040204], serialised as XML
1.0 [W3C.REC-xml-20040204]. Atom Publishing Protocol Documents MUST
be well-formed XML. This specification does not define any DTDs for
Atom Protocol, and hence does not require them to be "valid" in the
sense used by XML.
6.1 Referring to Information Items
This specification uses a shorthand for two common terms: the phrase
"Information Item" is omitted when discussing Element Information
Items and Attribute Information Items. Therefore, when this
specification uses the term "element," it is referring to an Element
Information Item in Infoset terms. Likewise, when it uses the term
"attribute," it is referring to an Attribute Information Item.
6.2 XML Namespace Usage
The namespace name [W3C.REC-xml-names-19990114] for the XML format
described in this specification is:
http://purl.org/atom/app#
This specification uses the prefix "app:" for the namespace name.
The choice of namespace prefix is not semantically significant.
The "app:" namespace is reserved for future forward-compatible
revisions of the Atom Publishing Protocol. Future versions of this
specification could add new elements and attributes to the markup
vocabulary. Software written to conform to this version of the
specification will not be able to process such markup correctly and,
in fact, will not be able to distinguish it from markup error. For
the purposes of this discussion, unrecognized markup from the Atom
Publishing Protocol vocabulary will be considered "foreign markup".
This specification also uses the prefix "atom:" for
"http://www.w3.org/2005/Atom", the namespace name of the Atom
Syndication Format [RFC4287].
6.3 Use of xml:base and xml:lang
XML elements defined by this specification MAY have an xml:base
attribute [W3C.REC-xmlbase-20010627]. When xml:base is used, it
serves the function described in section 5.1.1 of URI Generic Syntax
[RFC3986], establishing the base URI (or IRI) for resolving any
relative references found within the effective scope of the xml:base
Gregorio & de hOra Expires December 25, 2006 [Page 11]
Internet-Draft The Atom Publishing Protocol June 2006
attribute.
Any element defined by this specification MAY have an xml:lang
attribute, whose content indicates the natural language for the
element and its descendents. The language context is only
significant for elements and attributes declared to be "Language-
Sensitive" by this specification. Requirements regarding the content
and interpretation of xml:lang are specified in Section 2.12 of XML
1.0 [W3C.REC-xml-20040204].
appCommonAttributes =
attribute xml:base { atomUri }?,
attribute xml:lang { atomLanguageTag }?,
undefinedAttribute*
6.4 RELAX NG Schema
Some sections of this specification are illustrated with fragments of
a non-normative RELAX NG Compact schema [RNC]. A complete schema
appears in Appendix B. However, the text of this specification
provides the definition of conformance.
Gregorio & de hOra Expires December 25, 2006 [Page 12]
Internet-Draft The Atom Publishing Protocol June 2006
7. Introspection Documents
For authoring to commence, a client needs to first discover the
capabilities and locations of the available collections.
Introspection documents are designed to support this discovery
process. An Introspection Document describes workspaces, which are
server-defined groupings of collections.
Introspection documents are identified with the "application/
atomserv+xml" media type (see Section 14).
While an introspection document allows multiple workspaces, there is
no requirement that a server support multiple workspaces. In
addition, a collection MAY appear in more than one workspace.
7.1 Example
image/*
This Introspection Document describes two workspaces. The first,
called "Main Site", has two collections called "My Blog Entries" and
"Pictures" whose IRIs are "http://example.org/reilly/main" and
"http://example.org/reilly/pic" respectively. The "Pictures"
includes an accept element indicating that client can post image
files to the collection to create new entries. Entries with
associated media resources are discussed in section 8.3.
The second workspace is called "Side Bar Blog" and has a single
collection called "Remaindered Links" whose collection IRI is
"http://example.org/reilly/list".
Gregorio & de hOra Expires December 25, 2006 [Page 13]
Internet-Draft The Atom Publishing Protocol June 2006
7.2 Element Definitions
7.2.1 The "app:service" Element
The root of an introspection document is the "app:service" element.
The "app:service" element is the container for introspection
information associated with one or more workspaces. An app:service
element MUST contain one or more app:workspace elements.
namespace app = "http://purl.org/atom/app#"
start = appService
appService =
element app:service {
appCommonAttributes,
( appWorkspace+
& extensionElement* )
}
7.2.2 The "app:workspace" Element
The "app:workspace" element contains information elements about the
collections of resources available for editing. The app:workspace
element MAY contain zero or more app:collection elements.
appWorkspace =
element app:workspace {
appCommonAttributes,
attribute title { text },
( appCollection+
& extensionElement* )
}
In an app:workspace element, the first app:collection element MUST
refer to the preferred or primary collection. In the following
example, the "Entries" collection would be considered the preferred
collection:
Gregorio & de hOra Expires December 25, 2006 [Page 14]
Internet-Draft The Atom Publishing Protocol June 2006
image/*
7.2.2.1 The "title" Attribute
The app:workspace element MUST contain a "title" attribute, which
gives a human-readable name for the workspace. This attribute is
Language-Sensitive.
7.2.3 The "app:collection" Element
The "app:collection" describes an Atom Protocol collection. One
child element is defined here for app:collection: "app:accept".
appCollection =
element app:collection {
appCommonAttributes,
attribute title { text },
attribute href { atomUri },
( appAccept?
& extensionElement* )
}
In an Atom feed, the app:collection element MAY appear as a child of
an atom:feed or atom:source element to identify the collection to
which new entries can be added to the feed.
7.2.3.1 The "title" Attribute
The app:collection element MUST contain a "title" attribute, whose
value gives a human-readable name for the collection. This attribute
is Language-Sensitive.
7.2.3.2 The "href" Attribute
The app:collection element MUST contain a "href" attribute, whose
value gives the IRI of the collection.
Gregorio & de hOra Expires December 25, 2006 [Page 15]
Internet-Draft The Atom Publishing Protocol June 2006
7.2.4 The "app:accept" Element
The app:collection element MAY contain one "app:accept" element. The
app:accept element value specifies a comma-separated list of media-
ranges [RFC2616] identifying the types of representations that can be
POSTed to the Collection's URI. Whitespace separating the media-
range values is considered insignificant and MUST be ignored.
The app:accept element is similar to the HTTP Accept request-header
[RFC2616] with the exception that app:accept has no notion of
preference. Accordingly, the value syntax of app:accept does not use
accept-params or "q" parameters as specified in [RFC2616], section
14.1. The order of media-ranges is not significant. The following
lists are all equivalent:
image/png, image/*image/*, image/pngimage/*
A value of "entry" indicates that Atom Entry Documents can be posted
to the Collection. If the accept element is omitted, or empty,
clients SHOULD assume that only Atom Entry documents will be accepted
by the collection.
appAccept =
element app:accept {
appCommonAttributes,
( appTypeValue? )
}
appTypeValue = ( "entry" | media-type |entry-or-media-type )
media-type = xsd:string { pattern = "entry,(.+/.+,?)*" }
entry-or-media-type = xsd:string { pattern = "(.+/.+,?)*" }
Gregorio & de hOra Expires December 25, 2006 [Page 16]
Internet-Draft The Atom Publishing Protocol June 2006
8. Collections
8.1 Creating resources with POST
To add members to a collection, clients send POST requests to the
collection's URI. Collections MAY impose constraints on the media-
types of request entities POSTed to the collection and MAY generate a
response with a status code of 415 ("Unsupported Media Type").
If an entry was created in the collection which received the POST,
its URI MUST be returned in an HTTP Location header.
When the server generates a response with a status code of 201
("Created"), it SHOULD also return a response body, which, if
provided, MUST be an Atom Entry Document representing the newly-
created resource. Clients MUST NOT assume that an Atom Entry
returned is a full representation of the member resource.
Since the server is free to alter the posted entry, for example by
changing the content of the "id" element. returning the entry as
described in the previous paragraph can be useful to the client,
enabling it to correlate the client and server views of the new
entry.
When the POST request contains an Atom Entry Document, the response
from the server SHOULD contain a Content-Location header that
contains the same character-by-character value as the Location
header.
Clients MUST NOT assume that the URI provided by the Location header
can be used to edit the created entry.
The request body of the POST need not be an Atom entry. For example,
it might be a picture, or a movie. For a discussion of the issues in
posting such content, see Section 8.4.
8.2 Example
Below, the client sends a POST request containing an Atom Entry
representation to the URI of the Collection:
Gregorio & de hOra Expires December 25, 2006 [Page 17]
Internet-Draft The Atom Publishing Protocol June 2006
POST /myblog/entries HTTP/1.1
Host: example.org
User- Agent: Thingio/1.0
Content- Type: application/atom+xml
Content- Length: nnn
Atom-Powered Robots Run Amokurn:uuid:1225c695-cfb8-4ebb-aaaa-80da344efa6a2003-12-13T18:30:02ZJohn DoeSome text.
The server signals a successful creation with a status code of 201.
The response includes a "Location" header indicating the URI of the
Atom Entry and a representation of that Entry in the body of the
response.
HTTP/1.1 201 Created
Date: Fri, 7 Oct 2005 17:17:11 GMT
Content- Length: nnn
Content- Type: application/atom+xml; charset="utf-8"
Content- Location: http://example.org/edit/first-post.atom
Location: http://example.org/edit/first-post.atom
Atom-Powered Robots Run Amokurn:uuid:1225c695-cfb8-4ebb-aaaa-80da344efa6a2003-12-13T18:30:02ZJohn DoeSome text.
Note that the Entry created by the server might not match exactly the
Entry POSTed by the client. In particular, a server MAY change the
values of various elements in the Entry such as the atom:id, atom:
updated and atom:author values and MAY choose to remove or add other
elements and attributes, or change element and attribute values.
In particular, the publishing system in this example filled in some
values not provided in the original POST. For example, presumably it
Gregorio & de hOra Expires December 25, 2006 [Page 18]
Internet-Draft The Atom Publishing Protocol June 2006
ascertained the author's name via the authentication protocol used to
establish the right to post.
8.3 The 'edit' Link
Each member Entry within a collection SHOULD contain an atom:link
element with a link relation of "edit" that contains the IRI used to
retrieve, update or delete the member Entry.
8.4 Media Resources and Media Link Entries
As discussed above, if the body of a client's POST is an Atom Entry
document, this constitutes a request that the server create a new
entry in the collection to which the POST is addressed and return its
URI.
If the body of the client's POST is of a media type other than
application/atom+xml, this constitutes a request that the server
create a new resource as represented by the body of the post, called
a "media resource", and also an entry in the collection to which the
POST was addressed, called a "media link entry", and return both
URIs. If the server successfully creates a media resource and media
link entry pair, the Location header included in the response MUST be
that of the media link entry. The media link entry MUST have a
"content" element with a "src" attribute which links to the media
resource.
The intent is that the media link entry be used to store metadata
about the (perhaps non-textual) media resource, so that the media and
the metadata can be retrieved and updated separately.
A media link entry SHOULD contain an atom:link element with a link
relation of "edit-media" that contains the IRI used to modify the
media resource. Deletion of a media link entry SHOULD result in the
deletion of the linked media resource.
Implementors will note that per the requirements of [RFC4287], media
link entries MUST contain an atom:summary element. Upon successful
creation of a media link entry, a server MAY choose to populate the
atom:summary element (as well as other required elements such as
atom:id, atom:author and atom:title) with content derived from the
POSTed media resource or from any other source. A server might not
allow a client to modify the server selected values for these
elements.
Note that this specification covers the cases when the POST body is
an Atom Entry, and when it is of a non-Atom media type. It does not
specify any request semantics or server behavior in the case where
Gregorio & de hOra Expires December 25, 2006 [Page 19]
Internet-Draft The Atom Publishing Protocol June 2006
the POST media-type is application/atom+xml but the body is something
other than an Atom Entry.
8.4.1 Title: Header
A POST whose body is not of the Atom media type and which thus
requests the creation of a media resource SHOULD contain a Title:
header indicating the client's suggested title for the resource. For
example:
POST /myblog/fotes HTTP/1.1
Host: example.org
Content- Type: image/png
Content- Length: nnnn
Title: An Atom-Powered Robot
...binary data...
The server MAY use the content of the Title: header, as provided or
in a modified form, in constructing a title for the resource, which
would presumably appear in the media link entry.
Title = "Title" ":" [TEXT]
The syntax of this header MUST conform to the augmented BNF grammar
in section 2.1 of the HTTP/1.1 specification [RFC2616]. The [TEXT]
rule is described in section 2.2 of the same document. Words of
*TEXT MAY contain characters from character sets other than
[ISO88591] only when encoded according to the rules of [RFC2047].
8.4.2 Example
Below, the client sends a POST request containing a PNG image to the
URI of the Collection:
POST /myblog/entries HTTP/1.1
Host: example.org
Content- Type: image/png
Content- Length: nnn
Title: A picture of the beach
...binary data...
The server signals a successful creation with a status code of 201.
The response includes a "Location" header indicating the URI of the
Gregorio & de hOra Expires December 25, 2006 [Page 20]
Internet-Draft The Atom Publishing Protocol June 2006
media link entry and a representation of that entry in the body of
the response. The media link entry includes a content element with a
src attribute referencing the media resource, and a link using the
link relation "edit-media" specifying the IRI to be used for
modifying the media resource.
HTTP/1.1 201 Created
Date: Fri, 7 Oct 2005 17:17:11 GMT
Content- Length: nnn
Content- Type: application/atom+xml; charset="utf-8"
Content- Location: http://example.org/edit/first-post.atom
Location: http://example.org/edit/first-post.atom
A picture of the beachurn:uuid:1225c695-cfb8-4ebb-aaaa-80da344efa6a2003-12-13T18:30:02ZJohn Doe
8.5 Editing Entries with Foreign Markup
To avoid unintentional loss of data when editing entries or media
link entries, Atom Protocol clients SHOULD preserve all metadata,
including unknown foreign markup as defined in Section 6 of
[RFC4287], which has not been intentionally modified.
Gregorio & de hOra Expires December 25, 2006 [Page 21]
Internet-Draft The Atom Publishing Protocol June 2006
9. Listing Collections
Collection resources MUST provide representations in the form of Atom
Feed documents whose entries represent the collection's members.
Each entry in the Feed Document SHOULD have an atom:link element with
a relation of "edit" (See Section 10.1).
The entries in the returned Atom Feed MUST be ordered by their "atom:
updated" property, with the most recently updated entries coming
first in the document order. Clients SHOULD be constructed in
consideration of the fact that changes which do not alter the entry's
atom:updated value will not affect the position of the entry in a
collection.
Clients MUST NOT assume that an Atom Entry returned in the Feed is a
full representation of a member resource and SHOULD perform a GET on
the member resource before editing.
Collections can contain large numbers of resources. A naive client
such as a web spider or web browser could be overwhelmed if the
response to a GET contained every entry in the collection, and the
server would waste large amounts of bandwidth and processing time on
clients unable to handle the response. For this reason, servers MAY
return a partial listing containing the most recently updated member
resources. Such partial feed documents MUST have an atom:link with a
"next" relation whose "href" value is the URI of the next partial
listing of the collection (the least recently updated member
resources) where it exists. This is called "collection paging".
9.1 Collection Paging
The returned Atom feed MAY NOT contain entries for all the
collection's members. Instead, the Atom feed document MAY contain
link elements with "rel" attribute values of "next", "previous",
"first" and "last" that can be used to navigate through the complete
set of matching entries.
For instance, suppose a client is supplied the URI
"http://example.org/entries/go" of a collection of member entries,
where the server as a matter of policy avoids generating feed
documents containing more than 10 entries. The Atom feed document
for the collection will then represent the first 'page' in a set of
10 linked feed documents. The "first" relation will reference the
initial feed document in the set and the "last" relation references
the final feed document in the set. Within each document, the "next"
and "previous" link relations reference the preceding and subsequent
documents.
Gregorio & de hOra Expires December 25, 2006 [Page 22]
Internet-Draft The Atom Publishing Protocol June 2006
...
The "next" and "previous" link elements for the feed 'page' located
at "http://example.org/entries/2" would look like this:
...
Gregorio & de hOra Expires December 25, 2006 [Page 23]
Internet-Draft The Atom Publishing Protocol June 2006
10. Atom Format Link Relation Extensions
10.1 The "edit" Link Relation
The Atom Protocol adds the value "edit" to the Atom Registry of Link
Relations (see section 7.1 of [RFC4287]). The value of "edit"
specifies that the value of the href attribute is the IRI of an
editable Atom Entry Document. When appearing within an atom:entry,
the href IRI MAY be used to update and delete the resource
represented by that entry. An atom:entry MUST contain no more than
one "edit" link relation.
10.2 The "edit-media" Link Relation
The Atom Protocol adds the value "edit-media" to the Atom Registry of
Link Relations (see section 7.1 of [RFC4287]). When appearing within
an atom:entry, the value of the href attribute is an IRI that MAY be
used to modify a media resource associated with that entry.
An atom:entry MAY contain zero or more "edit-media" link relations.
An atom:entry MUST NOT contain more than one atom:link element with a
rel attribute value of "edit-media" that has the same type and
hreflang attribute values. All "edit-media" link relations in the
same entry reference the same resource. If a client encounters
multiple "edit-media" link relations in an entry then it SHOULD
choose a link based on the client preferences for type and hreflang.
If a client encounters multiple "edit-media" link relations in an
entry and has no preference based on the type and hreflang attributes
then the client SHOULD pick the first "edit-media" link relation in
document order.
Gregorio & de hOra Expires December 25, 2006 [Page 24]
Internet-Draft The Atom Publishing Protocol June 2006
11. Atom Publishing Control Extensions
11.1 The Atom Publishing Control Namespace
This specification defines an Atom Format extension for publishing
control called Atom Publishing Control. The namespace name for the
Atom Publishing Control's XML vocabulary is
"http://example.net/appns/". This specification uses "pub:" for the
namespace prefix. The choice of namespace prefix is not semantically
significant.
11.2 The "pub:control" Element
namespace pub = "http://example.net/appns/"
pubControl =
element pub:control {
atomCommonAttributes,
pubDraft?
& extensionElement
}
pubDraft =
element pub:draft { "yes" | "no" }
The "pub:control" element MAY appear as a child of an "atom:entry"
which is being created or updated via the Atom Publishing Protocol.
The "pub:control" element, if it does appear in an entry, MUST only
appear at most one time. The "pub:control" element is considered
foreign markup as defined in Section 6 of [RFC4287].
The "pub:control" element and its child elements MAY be included in
Atom Feed or Entry Documents.
The "pub:control" element MAY contain exactly one "pub:draft" element
as defined here, and MAY contain zero or more extension elements as
outlined in Section 6 of [RFC4287]. Both clients and servers MUST
ignore foreign markup present in the pub:control element.
11.2.1 The "pub:draft" Element
The number of "pub:draft" elements in "pub:control" MUST be zero or
one. Its value MUST be one of "yes" or "no". A value of "no" means
that the entry MAY be made publicly visible. If the "pub:draft"
element is missing then the value MUST be understood to be "no". The
inclusion of the pub:draft element represents a request by the client
to control the visibility of an entry and the pub:draft element MAY
be ignored by the server.
Gregorio & de hOra Expires December 25, 2006 [Page 25]
Internet-Draft The Atom Publishing Protocol June 2006
12. Securing the Atom Protocol
All instances of publishing Atom Format entries SHOULD be protected
by authentication to prevent posting or editing by unknown sources.
[[anchor22: note: this section is currently under discussion.]]
Gregorio & de hOra Expires December 25, 2006 [Page 26]
Internet-Draft The Atom Publishing Protocol June 2006
13. Security Considerations
The security of the Atom Protocol is based on [[anchor24: note:
refers to incomplete section]].
[[anchor25: note: talk here about denial of service attacks using
large XML files, or the billion laughs DTD attack.]]
Gregorio & de hOra Expires December 25, 2006 [Page 27]
Internet-Draft The Atom Publishing Protocol June 2006
14. IANA Considerations
An Atom Publishing Protocol Introspection Document, when serialized
as XML 1.0, can be identified with the following media type:
MIME media type name: application
MIME subtype name: atomserv+xml
Mandatory parameters: None.
Optional parameters:
"charset": This parameter has identical semantics to the charset
parameter of the "application/xml" media type as specified in
[RFC3023].
Encoding considerations: Identical to those of "application/xml" as
described in [RFC3023], section 3.2.
Security considerations: As defined in this specification.
[[anchor26: update upon publication]]
In addition, as this media type uses the "+xml" convention, it
shares the same security considerations as described in [RFC3023],
section 10.
Interoperability considerations: There are no known interoperability
issues.
Published specification: This specification. [[anchor27: update upon
publication]]
Applications that use this media type: No known applications
currently use this media type.
Additional information:
Magic number(s): As specified for "application/xml" in [RFC3023],
section 3.2.
File extension: .atomsrv
Fragment identifiers: As specified for "application/xml" in
[RFC3023], section 5.
Gregorio & de hOra Expires December 25, 2006 [Page 28]
Internet-Draft The Atom Publishing Protocol June 2006
Base URI: As specified in [RFC3023], section 6.
Macintosh File Type code: TEXT
Person and email address to contact for further information: Joe
Gregorio
Intended usage: COMMON
Author/Change controller: This specification's author(s). [[anchor28:
update upon publication]]
Gregorio & de hOra Expires December 25, 2006 [Page 29]
Internet-Draft The Atom Publishing Protocol June 2006
15. References
15.1 Normative References
[ISO88591]
ISO, "International Standard -- Information Processing --
8-bit Single-Byte Coded Graphic Character Sets -- Part 1:
Latin alphabet No. 1,", January 1987.
[RFC2047] Moore, K., "MIME (Multipurpose Internet Mail Extensions)
Part Three: Message Header Extensions for Non-ASCII Text",
RFC 2047, November 1996.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
[RFC3023] Murata, M., St. Laurent, S., and D. Kohn, "XML Media
Types", RFC 3023, January 2001.
[RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
Resource Identifier (URI): Generic Syntax", STD 66,
RFC 3986, January 2005.
[RFC3987] Duerst, M. and M. Suignard, "Internationalized Resource
Identifiers (IRIs)", RFC 3987, January 2005.
[RFC4287] Nottingham, M. and R. Sayre, "The Atom Syndication
Format", RFC 4287, December 2005.
[W3C.REC-xml-20040204]
Yergeau, F., Paoli, J., Sperberg-McQueen, C., Bray, T.,
and E. Maler, "Extensible Markup Language (XML) 1.0 (Third
Edition)", W3C REC REC-xml-20040204, February 2004.
[W3C.REC-xml-infoset-20040204]
Cowan, J., Tobin, R., and A. Layman, "XML Information Set
(Second Edition)", W3C REC W3C.REC-xml-infoset-20040204,
February 2004.
[W3C.REC-xml-names-19990114]
Hollander, D., Bray, T., and A. Layman, "Namespaces in
XML", W3C REC REC-xml-names-19990114, January 1999.
[W3C.REC-xmlbase-20010627]
Gregorio & de hOra Expires December 25, 2006 [Page 30]
Internet-Draft The Atom Publishing Protocol June 2006
Marsh, J., "XML Base", W3C REC W3C.REC-xmlbase-20010627,
June 2001.
15.2 Informative References
[RNC] Clark, J., "RELAX NG Compact Syntax", December 2001.
[W3C.REC-webarch-20041215]
Walsh, N. and I. Jacobs, "Architecture of the World Wide
Web, Volume One", W3C REC REC-webarch-20041215,
December 2004.
Gregorio & de hOra Expires December 25, 2006 [Page 31]
Internet-Draft The Atom Publishing Protocol June 2006
URIs
[1]
Authors' Addresses
Joe Gregorio (editor)
BitWorking, Inc
1002 Heathwood Dairy Rd.
Apex, NC 27502
US
Phone: +1 919 272 3764
Email: joe@bitworking.com
URI: http://bitworking.com/
Bill de hOra (editor)
Propylon Ltd.
45 Blackbourne Square, Rathfarnham Gate
Dublin, Dublin D14
IE
Phone: +353-1-4927444
Email: bill.dehora@propylon.com
URI: http://www.propylon.com/
Gregorio & de hOra Expires December 25, 2006 [Page 32]
Internet-Draft The Atom Publishing Protocol June 2006
Appendix A. Contributors
The content and concepts within are a product of the Atom community
and the Atompub Working Group.
Gregorio & de hOra Expires December 25, 2006 [Page 33]
Internet-Draft The Atom Publishing Protocol June 2006
Appendix B. RELAX NG Compact Schema
This appendix is informative.
The Relax NG schema explicitly excludes elements in the Atom Protocol
namespace which are not defined in this revision of the
specification. Requirements for Atom Protocol processors
encountering such markup are given in Section 6.2 and Section 6.3 of
[RFC4287].
# -*- rnc -*-
# RELAX NG Compact Syntax Grammar for the Atom Protocol
namespace app = "http://purl.org/atom/app#"
namespace local = ""
start = appService
# common:attrs
appCommonAttributes =
attribute xml:base { atomUri }?,
attribute xml:lang { atomLanguageTag }?,
undefinedAttribute*
undefinedAttribute =
attribute * - (xml:base | xml:lang | local:*) { text }
atomUri = text
atomLanguageTag = xsd:string {
pattern = "[A-Za-z]{1,8}(-[A-Za-z0-9]{1,8})*"
}
# app:service
appService =
element app:service {
appCommonAttributes,
( appWorkspace+
& extensionElement* )
}
# app:workspace
appWorkspace =
element app:workspace {
appCommonAttributes,
Gregorio & de hOra Expires December 25, 2006 [Page 34]
Internet-Draft The Atom Publishing Protocol June 2006
attribute title { text },
( appCollection+
& extensionElement* )
}
# app:collection
appCollection =
element app:collection {
appCommonAttributes,
attribute title { text },
attribute href { atomUri },
( appAccept?
& extensionElement* )
}
# app:member
appAccept =
element app:accept {
appCommonAttributes,
( appTypeValue? )
}
appTypeValue = ( "entry" | media-type |entry-or-media-type )
media-type = xsd:string { pattern = "entry,(.+/.+,?)*" }
entry-or-media-type = xsd:string { pattern = "(.+/.+,?)*" }
# above is an approximation, rnc doesn't support interleaved text
# Simple Extension
simpleExtensionElement =
element * - app:* {
text
}
# Structured Extension
structuredExtensionElement =
element * - app:* {
(attribute * { text }+,
(text|anyElement)*)
| (attribute * { text }*,
(text?, anyElement+, (text|anyElement)*))
}
# Other Extensibility
Gregorio & de hOra Expires December 25, 2006 [Page 35]
Internet-Draft The Atom Publishing Protocol June 2006
extensionElement =
simpleExtensionElement | structuredExtensionElement
# Extensions
anyElement =
element * {
(attribute * { text }
| text
| anyElement)*
}
# EOF
Gregorio & de hOra Expires December 25, 2006 [Page 36]
Internet-Draft The Atom Publishing Protocol June 2006
Appendix C. Revision History
draft-ietf-atompub-protocol-09: PaceWorkspaceMayHaveCollections,
PaceMediaEntries5,
http://www.imc.org/atom-protocol/mail-archive/msg05322.html, and
http://www.imc.org/atom-protocol/mail-archive/msg05272.html
draft-ietf-atompub-protocol-08: added infoset ref; added wording re
IRI/URI; fixed URI/IRI ; next/previous fixed as per Atom
LinkRelations Attribute
(http://www.imc.org/atom-protocol/mail-archive/msg04095.html);
incorporated: PaceEditLinkMustToMay; PaceMissingDraftHasNoMeaning,
PaceRemoveMemberTypeMust, PaceRemoveMemberTypePostMust,
PaceTitleHeaderOnlyInMediaCollections, PacePreserveForeignMarkup,
PaceClarifyTitleHeader, PaceClarifyMediaResourceLinks,
PaceTwoPrimaryCollections;
draft-ietf-atompub-protocol-07: updated Atom refs to RFC4287;
incorporated PaceBetterHttpResponseCode;
PaceClarifyCollectionAndDeleteMethodByWritingLessInsteadOfMore;
PaceRemoveAcceptPostText; PaceRemoveListTemplate2;
PaceRemoveRegistry; PaceRemoveWhoWritesWhat;
PaceSimplifyClarifyBetterfyRemoveBogusValidityText;
PaceCollectionOrderSignificance; PaceFixLostIntrospectionText;
PaceListPaging; PaceCollectionControl; element typo in Listing
collections para3 (was app:member-type, not app:list-template);
changed post atom entry example to be valid. Dropped inline use of
'APP'. Removed nested diagram from section 4. Added ed notes in the
security section.
draft-ietf-atompub-protocol-06 - Removed: Robert Sayre from the
contributors section per his request. Added in
PaceCollectionControl. Fixed all the {daterange} verbage and
examples so they all use a dash. Added full rnc schema. Collapsed
Introspection and Collection documents into a single document.
Removed {dateRange} queries. Renamed search to list. Moved
discussion of media and entry collection until later in the document
and tied the discussion to the Introspection element app:member-type.
draft-ietf-atompub-protocol-05 - Added: Contributors section. Added:
de hOra to editors. Fixed: typos. Added diagrams and description to
model section. Incorporates PaceAppDocuments, PaceAppDocuments2,
PaceSimplifyCollections2 (large-sized chunks of it anyhow: the
notions of Entry and Generic resources, the section 4 language on the
Protocol Model, 4.1 through 4.5.2, the notion of a Collection
document, as in Section 5 through 5.3, Section 7 "Collection
resources", Selection resources (modified from pace which talked
about search); results in major mods to Collection Documents, Section
Gregorio & de hOra Expires December 25, 2006 [Page 37]
Internet-Draft The Atom Publishing Protocol June 2006
9.2 "Title: Header" and brokeout para to section 9.1 Editing Generic
Resources). Added XML namespace and language section. Some cleanup
of front matter. Added Language Sensitivity to some attributes.
Removed resource descriptions from terminology. Some juggling of
sections. See:
http://www.imc.org/atom-protocol/mail-archive/msg01812.html.
draft-ietf-atompub-protocol-04 - Add ladder diagrams, reorganize, add
SOAP interactions
draft-ietf-atompub-protocol-03 - Incorporates PaceSliceAndDice3 and
PaceIntrospection.
draft-ietf-atompub-protocol-02 - Incorporates Pace409Response,
PacePostLocationMust, and PaceSimpleResourcePosting.
draft-ietf-atompub-protocol-01 - Added in sections on Responses for
the EditURI. Allow 2xx for response to EditURI PUTs. Elided all
mentions of WSSE. Started adding in some normative references.
Added the section "Securing the Atom Protocol". Clarified that it is
possible that the PostURI and FeedURI could be the same URI. Cleaned
up descriptions for Response codes 400 and 500.
Rev draft-ietf-atompub-protocol-00 - 5Jul2004 - Renamed the file and
re-titled the document to conform to IETF submission guidelines.
Changed MIME type to match the one selected for the Atom format.
Numerous typographical fixes. We used to have two 'Introduction'
sections. One of them was moved into the Abstract the other absorbed
the Scope section. IPR and copyright notifications were added.
Rev 09 - 10Dec2003 - Added the section on SOAP enabled clients and
servers.
Rev 08 - 01Dec2003 - Refactored the specification, merging the
Introspection file into the feed format. Also dropped the
distinction between the type of URI used to create new entries and
the kind used to create comments. Dropped user preferences.
Rev 07 - 06Aug2003 - Removed the use of the RSD file for auto-
discovery. Changed copyright until a final standards body is chosen.
Changed query parameters for the search facet to all begin with atom-
to avoid name collisions. Updated all the Entries to follow the 0.2
version. Changed the format of the search results and template file
to a pure element based syntax.
Rev 06 - 24Jul2003 - Moved to PUT for updating Entries. Changed all
the mime-types to application/x.atom+xml. Added template editing.
Changed 'edit-entry' to 'create-entry' in the Introspection file to
Gregorio & de hOra Expires December 25, 2006 [Page 38]
Internet-Draft The Atom Publishing Protocol June 2006
more accurately reflect its purpose.
Rev 05 - 17Jul2003 - Renamed everything Echo into Atom. Added
version numbers in the Revision history. Changed all the mime-types
to application/atom+xml.
Rev 04 - 15Jul2003 - Updated the RSD version used from 0.7 to 1.0.
Change the method of deleting an Entry from POSTing to
using the HTTP DELETE verb. Also changed the query interface to GET
instead of POST. Moved Introspection Discovery to be up under
Introspection. Introduced the term 'facet' for the services listed
in the Introspection file.
Rev 03 - 10Jul2003 - Added a link to the Wiki near the front of the
document. Added a section on finding an Entry. Retrieving an Entry
now broken out into its own section. Changed the HTTP status code
for a successful editing of an Entry to 205.
Rev 02 - 7Jul2003 - Entries are no longer returned from POSTs,
instead they are retrieved via GET. Cleaned up figure titles, as
they are rendered poorly in HTML. All content-types have been
changed to application/atom+xml.
Rev 01 - 5Jul2003 - Renamed from EchoAPI.html to follow the more
commonly used format: draft-gregorio-NN.html. Renamed all references
to URL to URI. Broke out introspection into its own section. Added
the Revision History section. Added more to the warning that the
example URIs are not normative.
Gregorio & de hOra Expires December 25, 2006 [Page 39]
Internet-Draft The Atom Publishing Protocol June 2006
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use of
such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at
ietf-ipr@ietf.org.
The IETF has been notified of intellectual property rights claimed in
regard to some or all of the specification contained in this
document. For more information consult the online list of claimed
rights.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2006). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Gregorio & de hOra Expires December 25, 2006 [Page 40]
Internet-Draft The Atom Publishing Protocol June 2006
Acknowledgment
Funding for the RFC Editor function is currently provided by the
Internet Society.
Gregorio & de hOra Expires December 25, 2006 [Page 41]