Network Working Group B. Carpenter Internet-Draft Univ. of Auckland Intended status: Informational B. Liu, Ed. Expires: June 26, 2018 Huawei Technologies W. Wang X. Gong BUPT University December 23, 2017 Generic Autonomic Signaling Protocol Application Program Interface (GRASP API) draft-ietf-anima-grasp-api-00 Abstract This document is a conceptual outline of an application programming interface (API) for the Generic Autonomic Signaling Protocol (GRASP). Such an API is needed for Autonomic Service Agents (ASA) calling the GRASP protocol module to exchange autonomic network messages with other ASAs. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on June 26, 2018. Copyright Notice Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents Carpenter, et al. Expires June 26, 2018 [Page 1] Internet-Draft GRASP API December 2017 carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. GRASP API for ASA . . . . . . . . . . . . . . . . . . . . . . 3 2.1. Design Principles . . . . . . . . . . . . . . . . . . . . 3 2.2. Asynchronous Operations . . . . . . . . . . . . . . . . . 4 2.3. API definition . . . . . . . . . . . . . . . . . . . . . 6 2.3.1. Parameters and data structures . . . . . . . . . . . 6 2.3.2. Registration . . . . . . . . . . . . . . . . . . . . 9 2.3.3. Discovery . . . . . . . . . . . . . . . . . . . . . . 11 2.3.4. Negotiation . . . . . . . . . . . . . . . . . . . . . 12 2.3.5. Synchronization and Flooding . . . . . . . . . . . . 17 2.3.6. Invalid Message Function . . . . . . . . . . . . . . 21 3. Example Logic Flows . . . . . . . . . . . . . . . . . . . . . 21 4. Security Considerations . . . . . . . . . . . . . . . . . . . 21 5. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 22 6. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 22 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 22 7.1. Normative References . . . . . . . . . . . . . . . . . . 22 7.2. Informative References . . . . . . . . . . . . . . . . . 22 Appendix A. Error Codes . . . . . . . . . . . . . . . . . . . . 22 Appendix B. Change log [RFC Editor: Please remove] . . . . . . . 24 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 25 1. Introduction As defined in [I-D.ietf-anima-reference-model], the Autonomic Service Agent (ASA) is the atomic entity of an autonomic function; and it is instantiated on autonomic nodes. When ASAs communicate with each other, they should use the Generic Autonomic Signaling Protocol (GRASP) [I-D.ietf-anima-grasp]. As the following figure shows, GRASP could contain two major sub- layers. The bottom is the GRASP base protocol module, which is only responsible for sending and receiving GRASP messages and maintaining shared data structures. The upper layer is some extended functions based upon GRASP basic protocol. For example, [I-D.liu-anima-grasp-distribution] describes a possible extended function. It is desirable that ASAs can be designed as portable user-space programs using a portable API. In many operating systems, the GRASP Carpenter, et al. Expires June 26, 2018 [Page 2] Internet-Draft GRASP API December 2017 module will therefore be split into two layers, one being a library that provides the API and the other being core code containing common components such as multicast handling and the discovery cache. The details of this are system-dependent. In particular, the GRASP library might need to communicate with the GRASP core via an inter- process communication (IPC) mechanism. +----+ +----+ |ASAs| |ASAs| +----+ +----+ | | | GRASP Function API | | | +------------------+ |GRASP API | GRASP Extended | | | Function Modules | | +------------------+ | +------------------------------------------+ | GRASP Library | | GRASP Module - - - - - - - - - - - - - -| | GRASP Core | +------------------------------------------+ Both the GRASP library and the extended function modules should be available to the ASAs. Thus, there need to be two sub-sets of API. However, since the extended functions are expected to be added in an incremental manner, it is inappropriate to define the function APIs in a single document. This document only defines the base GRASP API. Note that a very simple autonomic node might contain only a single ASA in addition to the autonomic infrastructure components described in [I-D.ietf-anima-bootstrapping-keyinfra] and [I-D.ietf-anima-autonomic-control-plane]. Such a node might directly integrate GRASP in its autonomic code and therefore not require this API to be installed. This document gives a conceptual outline of the API. It is not a formal specification for any particular programming language or operating system, and it is expected that details will be clarified in individual implementations. 2. GRASP API for ASA 2.1. Design Principles The assumption of this document is that any Autonomic Service Agent (ASA) needs to call a GRASP module that handles protocol details (security, sending and listening for GRASP messages, waiting, caching Carpenter, et al. Expires June 26, 2018 [Page 3] Internet-Draft GRASP API December 2017 discovery results, negotiation looping, sending and receiving sychronization data, etc.) but understands nothing about individual objectives. The semantics of objectives are unknown to the GRASP module and are handled only by the ASAs. Thus, this is a high level abstract API for use by ASAs. Individual language bindings should be defined in separate documents. An assumption of this API is that ASAs may fall into various classes: o ASAs that only use GRASP for discovery purposes. o ASAs that use GRASP negotiation but only as an initiator (client). o ASAs that use GRASP negotiation but only as a responder. o ASAs that use GRASP negotiation as an initiator or responder. o ASAs that use GRASP synchronization but only as an initiator (recipient). o ASAs that use GRASP synchronization but only as a responder and/or flooder. o ASAs that use GRASP synchronization as an initiator, responder and/or flooder. The API also assumes that one ASA may support multiple objectives. Nothing prevents an ASA from supporting some objectives for synchronization and others for negotiation. The API design assumes that the operating system and programming language provide a mechanism for simultaneous asynchronous operations. This is discussed in detail in Section 2.2. This is a preliminary version. A few gaps exist: o Authorization of ASAs is out of scope. o User-supplied explicit locators for an objective are not supported. o The Rapid mode of GRASP is not supported. 2.2. Asynchronous Operations GRASP includes asynchronous operations and wait states. Most ASAs will need to support several simultaneous operations; for example an ASA might need to negotiate one objective with a peer while Carpenter, et al. Expires June 26, 2018 [Page 4] Internet-Draft GRASP API December 2017 discovering and synchronizing a different objective with a different peer. Alternatively, an ASA which acts as a resource manager might need to run simultaneous negotiations for a given objective with multiple different peers. Thus, both the GRASP core and most ASAs need to support asynchronous operations. Depending on both the operating system and the programming language in use, there are two main techniques for such parallel operations: multi-threading, or a polling or 'event loop' structure. In multi-threading, the operating system and language will provide the necessary support for asynchronous operations, including creation of new threads, context switching between threads, queues, locks, and implicit wait states. In this case, all API calls can be treated naturally as synchronous, even if they include wait states, blocking and queueing. In an event loop implementation, synchronous blocking calls are not acceptable. Therefore all calls must be non-blocking, and the main loop will support multiple GRASP sessions in parallel by repeatedly checking each one for a change of state. To facilitate this, the API implementation will provide non-blocking versions of all the functions that otherwise involve blocking and queueing. In these calls, a 'noReply' code will be returned by each call instead of blocking, until such time as the event for which it is waiting has occurred. Thus, for example, discover() would return "noReply" instead of waiting until discovery has succeeded or timed out. The discover() call would be repeated in every cycle of the main loop until it completes. A 'session_nonce' parameter (described below) is used to distinguish simultaneous GRASP sessions from each other, so that any number of sessions may proceed in parallel. The following calls involve waiting for a remote operation, so they could use this mechanism: discover() request_negotiate() negotiate_step() listen_negotiate() synchronize() In all these calls, the 'session_nonce' is a read/write parameter. On the first call, it is set to a null value, and the API returns the 'noReply' code and a non-null value. This value must be used in all Carpenter, et al. Expires June 26, 2018 [Page 5] Internet-Draft GRASP API December 2017 subsequent calls. By this mechanism, multiple overlapping sessions can be distinguished, both in the ASA and in the GRASP core. 2.3. API definition 2.3.1. Parameters and data structures This section describes parameters and data structures uaed in multiple API calls. 2.3.1.1. Errorcode All functions in the API have an unsigned 'errorcode' integer as their return value (the first returned value in languages that allow multiple returned parameters). An errorcode of zero indicates success. Any other value indicates failure of some kind. The first three errorcodes have special importance: 1. Declined: used to indicate that the other end has sent a GRASP Negotiation End message (M_END) with a Decline option (O_DECLINE). 2. No reply: used in non-blocking calls to indicate that the other end has sent no reply so far (see Section 2.2). 3. Unspecified error: used when no more specific error code applies. Appendix A gives a full list of currently defined error codes, based on implementation experience. 2.3.1.2. Timeout Wherever a 'timeout' parameter appears, it is an integer expressed in milliseconds. If it is zero, the GRASP default timeout (GRASP_DEF_TIMEOUT, see [I-D.ietf-anima-grasp]) will apply. If no response is received before the timeout expires, the call will fail unless otherwise noted. 2.3.1.3. Objective An 'objective' parameter is a data structure with the following components: o name (UTF-8 string) - the objective's name o neg (Boolean flag) - True if objective supports negotiation (default False) Carpenter, et al. Expires June 26, 2018 [Page 6] Internet-Draft GRASP API December 2017 o synch (Boolean flag) - True if objective supports synchronization (default False) o dry (Boolean flag) - True if objective supports dry-run negotiation (default False) * Note 1: All objectives are assumed to support discovery, so there is no Boolean for that. * Note 2: Only one of 'synch' or 'neg' may be True. * Note 3: 'dry' must not be True unless 'neg' is also True. o loop_count (integer) - Limit on negotiation steps etc. (default GRASP_DEF_LOOPCT, see [I-D.ietf-anima-grasp]) o value - a specific data structure expressing the value of the objective. The format is language dependent, with the constraint that it can be validly represented in CBOR (default integer = 0). An essential requirement for all language mappings and all implementations is that, regardless of what other options exist for a language-specific represenation of the value, there is always an option to use a CBOR byte string as the value. The API will then wrap this byte string in CBOR Tag 24 for transmission via GRASP, and unwrap it after reception. An example data structure definition for an objective in the C language is: typedef struct { char *name; uint8_t flags; // flag bits as defined by GRASP int loop_count; int value_size; // size of value uint8_t cbor_value[]; // CBOR bytestring of value } objective; An example data structure definition for an objective in the Python language is: Carpenter, et al. Expires June 26, 2018 [Page 7] Internet-Draft GRASP API December 2017 class objective: """A GRASP objective""" def __init__(self, name): self.name = name #Unique name, string self.neg = False #True if objective supports negotiation self.dry = False #True if objective supports dry-run neg. self.synch = False #True if objective supports synch self.loop_count = GRASP_DEF_LOOPCT #Default starting value self.value = 0 #Place holder; any valid Python object 2.3.1.4. ASA_locator An 'ASA_locator' parameter is a data structure with the following contents: o locator - The actual locator, either an IP address or an ASCII string. o ifi (integer) - The interface identifier index via which this was discovered - probably no use to a normal ASA o expire (system dependent type) - The time on the local system clock when this locator will expire from the cache o is_ipaddress (Boolean) - True if the locator is an IP address o is_fqdn (Boolean) - True if the locator is an FQDN o is_uri (Boolean) - True if the locator is a URI o diverted (Boolean) - True if the locator was discovered via a Divert option o protocol (integer) - Applicable transport protocol (IPPROTO_TCP or IPPROTO_UDP) o port (integer) - Applicable port number 2.3.1.5. Tagged_objective A 'tagged_objective' parameter is a data structure with the following contents: o objective - An objective o locator - The ASA_locator associated with the objective, or a null value. Carpenter, et al. Expires June 26, 2018 [Page 8] Internet-Draft GRASP API December 2017 2.3.1.6. Asa_nonce In most calls, an 'asa_nonce' parameter is required. It is generated when an ASA registers with GRASP, and any call in which an invalid nonce is presented will fail. It is an up to 32-bit opaque value (for example represented as a uint32_t, depending on the language). It should be unpredictable; a possible implementation is to use the same mechanism that GRASP uses to generate Session IDs [I-D.ietf-anima-grasp]. Another possible implementation is to hash the name of the ASA with a locally defined secret key. 2.3.1.7. Session_nonce In some calls, a 'session_nonce' parameter is required. This is an opaque data structure as far as the ASA is concerned, used to identify calls to the API as belonging to a specific GRASP session (see Section 2.2). In fully threaded implementations this parameter might not be needed, but it is included to act as a session handle if necessary. It will also allow GRASP to detect and ignore malicious calls or calls from timed-out sessions. A possible implementation is to form the nonce from the underlying GRASP Session ID and the source address of the session. 2.3.2. Registration These functions are used to register an ASA and the objectives that it supports with the GRASP module. If an authorization model is added to GRASP, it would be added here. o register_asa() Input parameter: name of the ASA (UTF-8 string) Return parameters: errorcode (integer) asa_nonce (integer) (if successful) This initialises state in the GRASP module for the calling entity (the ASA). In the case of success, an 'asa_nonce' is returned which the ASA must present in all subsequent calls. In the case of failure, the ASA has not been authorized and cannot operate. o deregister_asa() Carpenter, et al. Expires June 26, 2018 [Page 9] Internet-Draft GRASP API December 2017 Input parameters: asa_nonce (integer) name of the ASA (UTF-8 string) Return parameter: errorcode (integer) This removes all state in the GRASP module for the calling entity (the ASA), and deregisters any objectives it has registered. Note that these actions must also happen automatically if an ASA crashes. Note - the ASA name is strictly speaking redundant in this call, but is present for clarity. o register_objective() Input parameters: asa_nonce (integer) objective (structure) ttl (integer - default GRASP_DEF_TIMEOUT) discoverable (Boolean - default False) overlap (Boolean - default False) local (Boolean - default False) Return parameter: errorcode (integer) This registers an objective that this ASA supports and may modify. The 'objective' becomes a candidate for discovery. However, discovery responses should not be enabled until the ASA calls listen_negotiate() or listen_synchronize(), showing that it is able to act as a responder. The ASA may negotiate the objective or send synchronization or flood data. Registration is not needed if the ASA only wants to receive synchronization or flood data for the objective concerned. Carpenter, et al. Expires June 26, 2018 [Page 10] Internet-Draft GRASP API December 2017 The 'ttl' parameter is the valid lifetime (time to live) in milliseconds of any discovery response for this objective. The default value should be the GRASP default timeout (GRASP_DEF_TIMEOUT, see [I-D.ietf-anima-grasp]). If the optional parameter 'discoverable' is True, the objective is immediately discoverable. This is intended for objectives that are only defined for GRASP discovery, and which do not support negotiation or synchronization. If the optional parameter 'overlap' is True, more than one ASA may register this objective in the same GRASP instance. If the optional parameter 'local' is True, discovery must return a link-local address. This feature is for objectives that must be restricted to the local link. This call may be repeated for multiple objectives. o deregister_objective() Input parameters: asa_nonce (integer) objective (structure) Return parameter: errorcode (integer) The 'objective' must have been registered by the calling ASA; if not, this call fails. Otherwise, it removes all state in the GRASP module for the given objective. 2.3.3. Discovery o discover() Input parameters: asa_nonce (integer) objective (structure) timeout (integer) flush (Boolean - default False) Carpenter, et al. Expires June 26, 2018 [Page 11] Internet-Draft GRASP API December 2017 Return parameters: errorcode (integer) locator_list (structure) This returns a list of discovered 'ASA_locator's for the given objective. If the optional parameter 'flush' is True, any locally cached locators for the objective are deleted first. Otherwise, they are returned immediately. If not, GRASP discovery is performed, and all results obtained before the timeout expires are returned. If no results are obtained, an empty list is returned after the timeout. That is not an error condition. Threaded implementation: This should be called in a separate thread if asynchronous operation is required. Event loop implementation: An additional read/write 'session_nonce' parameter is used. 2.3.4. Negotiation o request_negotiate() Input parameters: asa_nonce (integer) objective (structure) peer (ASA_locator) timeout (integer) Return parameters: errorcode (integer) session_nonce (structure) (if successful) proffered_objective (structure) (if successful) reason (string) (if negotiation declined) This function opens a negotiation session. The 'objective' parameter must include the requested value, and its loop count Carpenter, et al. Expires June 26, 2018 [Page 12] Internet-Draft GRASP API December 2017 should be set to a suitable value by the ASA. If not, the GRASP default will apply. Note that a given negotiation session may or may not be a dry- run negotiation; the two modes must not be mixed in a single session. The 'peer' parameter is the target node; it must be an 'ASA_locator' as returned by discover(). If the peer is null, GRASP discovery is performed first. If the 'errorcode' return parameter is 0, the negotiation has successfully started. There are then two cases: 1. The 'session_nonce' parameter is null. In this case the negotiation has succeeded (the peer has accepted the request). The returned 'proffered_objective' contains the value accepted by the peer. 2. The 'session_nonce' parameter is not null. In this case negotiation must continue. The returned 'proffered_objective' contains the first value proffered by the negotiation peer. Note that this instance of the objective must be used in the subsequent negotiation call because it also contains the current loop count. The 'session_nonce' must be presented in all subsequent negotiation steps. This function must be followed by calls to 'negotiate_step' and/or 'negotiate_wait' and/or 'end_negotiate' until the negotiation ends. 'request_negotiate' may then be called again to start a new negotation. If the 'errorcode' parameter has the value 1 ('declined'), the negotiation has been declined by the peer (M_END and O_DECLINE features of GRASP). The 'reason' string is then available for information and diagnostic use, but it may be a null string. For this and any other error code, an exponential backoff is recommended before any retry. Threaded implementation: This should be called in a separate thread if asynchronous operation is required. Event loop implementation: The 'session_nonce' parameter is used in read/write mode. Special note for the ACP infrastructure ASA: It is likely that this ASA will need to discover and negotiate with its peers in Carpenter, et al. Expires June 26, 2018 [Page 13] Internet-Draft GRASP API December 2017 each of its on-link neighbors. It will therefore need to know not only the link-local IP address but also the physical interface and transport port for connecting to each neighbor. One implementation approach to this is to include these details in the 'session_nonce' data structure, which is opaque to normal ASAs. o listen_negotiate() Input parameters: asa_nonce (integer) objective (structure) Return parameters: errorcode (integer) session_nonce (structure) (if successful) requested_objective (structure) (if successful) This function instructs GRASP to listen for negotiation requests for the given 'objective'. It also enables discovery responses for the objective. Threaded implementation: It will block waiting for an incoming request, so should be called in a separate thread if asynchronous operation is required. Event loop implementation: A read/write 'session_nonce' parameter is used. Unless there is an unexpected failure, this call only returns after an incoming negotiation request. When it does so, 'requested_objective' contains the first value requested by the negotiation peer. Note that this instance of the objective must be used in the subsequent negotiation call because it also contains the current loop count. The 'session_nonce' must be presented in all subsequent negotiation steps. This function must be followed by calls to 'negotiate_step' and/or 'negotiate_wait' and/or 'end_negotiate' until the negotiation ends. 'listen_negotiate' may then be called again to await a new negotation. Carpenter, et al. Expires June 26, 2018 [Page 14] Internet-Draft GRASP API December 2017 If an ASA is capable of handling multiple negotiations simultaneously, it may call 'listen_negotiate' simultaneously from multiple threads. The API and GRASP implementation must support re-entrant use of the listening state and the negotiation calls. Simultaneous sessions will be distinguished by the threads themselves, the GRASP Session IDs, and the underlying unicast transport sockets. o stop_listen_negotiate() Input parameters: asa_nonce (integer) objective (structure) Return parameter: errorcode (integer) Instructs GRASP to stop listening for negotiation requests for the given objective, i.e., cancels 'listen_negotiate'. Threaded implementation: Must be called from a different thread than 'listen_negotiate'. Event loop implementation: no special considerations. o negotiate_step() Input parameters: asa_nonce (integer) session_nonce (structure) objective (structure) timeout (integer) Return parameters: Exactly as for 'request_negotiate' Executes the next negotation step with the peer. The 'objective' parameter contains the next value being proffered by the ASA in this step. Carpenter, et al. Expires June 26, 2018 [Page 15] Internet-Draft GRASP API December 2017 Threaded implementation: Called in the same thread as the preceding 'request_negotiate' or 'listen_negotiate', with the same value of 'session_nonce'. Event loop implementation: Must use the same value of 'session_nonce' returned by the preceding 'request_negotiate' or 'listen_negotiate'. o negotiate_wait() Input parameters: asa_nonce (integer) session_nonce (structure) timeout (integer) Return parameters: errorcode (integer) Delay negotiation session by 'timeout' milliseconds. Threaded implementation: Called in the same thread as the preceding 'request_negotiate' or 'listen_negotiate', with the same value of 'session_nonce'. Event loop implementation: Must use the same value of 'session_nonce' returned by the preceding 'request_negotiate' or 'listen_negotiate'. o end_negotiate() Input parameters: asa_nonce (integer) session_nonce (structure) reply (Boolean) reason (UTF-8 string) Return parameters: errorcode (integer) Carpenter, et al. Expires June 26, 2018 [Page 16] Internet-Draft GRASP API December 2017 End the negotiation session. 'reply' = True for accept (successful negotiation), False for decline (failed negotiation). 'reason' = optional string describing reason for decline. Threaded implementation: Called in the same thread as the preceding 'request_negotiate' or 'listen_negotiate', with the same value of 'session_nonce'. Event loop implementation: Must use the same value of 'session_nonce' returned by the preceding 'request_negotiate' or 'listen_negotiate'. 2.3.5. Synchronization and Flooding o synchronize() Input parameters: asa_nonce (integer) objective (structure) peer (ASA_locator) timeout (integer) Return parameters: errorcode (integer) objective (structure) (if successful) This call requests the synchronized value of the given 'objective'. Since this is essentially a read operation, any ASA can do it. Therefore the API checks that the ASA is registered but the objective doesn't need to be registered by the calling ASA. If the objective was already flooded, the flooded value is returned immediately in the 'result' parameter. In this case, the 'source' and 'timeout' are ignored. Otherwise, synchronization with a discovered ASA is performed. The 'peer' parameter is an 'ASA_locator' as returned by Carpenter, et al. Expires June 26, 2018 [Page 17] Internet-Draft GRASP API December 2017 discover(). If 'peer' is null, GRASP discovery is performed first. This call should be repeated whenever the latest value is needed. Threaded implementation: Call in a separate thread if asynchronous operation is required. Event loop implementation: An additional read/write 'session_nonce' parameter is used. Since this is essentially a read operation, any ASA can use it. Therefore GRASP checks that the calling ASA is registered but the objective doesn't need to be registered by the calling ASA. In the case of failure, an exponential backoff is recommended before retrying. o listen_synchronize() Input parameters: asa_nonce (integer) objective (structure) Return parameters: errorcode (integer) This instructs GRASP to listen for synchronization requests for the given objective, and to respond with the value given in the 'objective' parameter. It also enables discovery responses for the objective. This call is non-blocking and may be repeated whenever the value changes. o stop_listen_synchronize() Input parameters: asa_nonce (integer) objective (structure) Return parameters: Carpenter, et al. Expires June 26, 2018 [Page 18] Internet-Draft GRASP API December 2017 errorcode (integer) This call instructs GRASP to stop listening for synchronization requests for the given 'objective', i.e. it cancels a previous listen_synchronize. o flood() Input parameters: asa_nonce (integer) ttl (integer) tagged_objective_list (structure) Return parameters: errorcode (integer) This call instructs GRASP to flood the given synchronization objective(s) and their value(s) and associated locator(s) to all GRASP nodes. The 'ttl' parameter is the valid lifetime (time to live) of the flooded data in milliseconds (0 = infinity) The 'tagged_objective_list' parameter is a list of one or more 'tagged_objective' couplets. The 'locator' parameter that tags each objective is normally null but may be a valid 'ASA_locator'. Infrastructure ASAs needing to flood an {address, protocol, port} 3-tuple with an objective create an ASA_locator object to do so. If the IP address in that locator is the unspecified address ('::') it is replaced by the link- local address of the sending node in each copy of the flood multicast, which will be forced to have a loop count of 1. This feature is for objectives that must be restricted to the local link. The function checks that the ASA registered each objective. This call may be repeated whenever any value changes. o get_flood() Input parameters: asa_nonce (integer) Carpenter, et al. Expires June 26, 2018 [Page 19] Internet-Draft GRASP API December 2017 objective (structure) Return parameters: errorcode (integer) tagged_objective_list (structure) (if successful) This call instructs GRASP to return the given synchronization objective if it has been flooded and its lifetime has not expired. Since this is essentially a read operation, any ASA can do it. Therefore the API checks that the ASA is registered but the objective doesn't need to be registered by the calling ASA. The 'tagged_objective_list' parameter is a list of 'tagged_objective' couplets, each one being a copy of the flooded objective and a coresponding locator. Thus if the same objective has been flooded by multiple ASAs, the recipient can distinguish the copies. Note that this call is for advanced ASAs. In a simple case, an ASA can simply call synchronize() in order to get a valid flooded objective. o expire_flood() Input parameters: asa_nonce (integer) tagged_objective (structure) Return parameters: errorcode (integer) This is a call that can only be used after a preceding call to get_flood() by an ASA that is capable of deciding that the flooded value is stale or invalid. Use with care. The 'tagged_objective' parameter is the one to be expired. Carpenter, et al. Expires June 26, 2018 [Page 20] Internet-Draft GRASP API December 2017 2.3.6. Invalid Message Function o send_invalid() Input parameters: asa_nonce (integer) session_nonce (structure) info (bytes) Return parameters: errorcode (integer) Sends a GRASP Invalid Message (M_INVALID) message, as described in [I-D.ietf-anima-grasp]. Should not be used if end_negotiate() would be sufficient. Note that this message may be used in response to any unicast GRASP message that the receiver cannot interpret correctly. In most cases this message will be generated internally by a GRASP implementation. 'info' = optional diagnostic data. May be raw bytes from the invalid message. 3. Example Logic Flows TBD (Until this section is written, some Python examples can be found at .) 4. Security Considerations Security issues for the GRASP protocol are discussed in [I-D.ietf-anima-grasp]. Authorization of ASAs is a subject for future study. The 'asa_nonce' parameter is used in the API as a first line of defence against a malware process attempting to imitate a legitimately registered ASA. The 'session_nonce' parameter is used in the API as a first line of defence against a malware process attempting to hijack a GRASP session. Carpenter, et al. Expires June 26, 2018 [Page 21] Internet-Draft GRASP API December 2017 5. IANA Considerations This document does not need IANA assignments. 6. Acknowledgements Excellent suggestions were made by Michael Richardson and other participansts in the ANIMA WG. 7. References 7.1. Normative References [I-D.ietf-anima-grasp] Bormann, C., Carpenter, B., and B. Liu, "A Generic Autonomic Signaling Protocol (GRASP)", draft-ietf-anima- grasp-15 (work in progress), July 2017. 7.2. Informative References [I-D.ietf-anima-autonomic-control-plane] Eckert, T., Behringer, M., and S. Bjarnason, "An Autonomic Control Plane (ACP)", draft-ietf-anima-autonomic-control- plane-13 (work in progress), December 2017. [I-D.ietf-anima-bootstrapping-keyinfra] Pritikin, M., Richardson, M., Behringer, M., Bjarnason, S., and K. Watsen, "Bootstrapping Remote Secure Key Infrastructures (BRSKI)", draft-ietf-anima-bootstrapping- keyinfra-09 (work in progress), October 2017. [I-D.ietf-anima-reference-model] Behringer, M., Carpenter, B., Eckert, T., Ciavaglia, L., Pierre, P., Liu, B., Nobre, J., and J. Strassner, "A Reference Model for Autonomic Networking", draft-ietf- anima-reference-model-05 (work in progress), October 2017. [I-D.liu-anima-grasp-distribution] Liu, B. and S. Jiang, "Information Distribution over GRASP", draft-liu-anima-grasp-distribution-04 (work in progress), May 2017. Appendix A. Error Codes This Appendix lists the error codes defined so far, with suggested symbolic names and corresponding descriptive strings in English. It is expected that complete API implementations will provide for Carpenter, et al. Expires June 26, 2018 [Page 22] Internet-Draft GRASP API December 2017 localisation of these descriptive strings, and that additional error codes will be needed according to implementation details. ok 0 "OK" declined 1 "Declined" noReply 2 "No reply" unspec 3 "Unspecified error" ASAfull 4 "ASA registry full" dupASA 5 "Duplicate ASA name" noASA 6 "ASA not registered" notYourASA 7 "ASA registered but not by you" notBoth 8 "Objective cannot support both negotiation and synchronization" notDry 9 "Dry-run allowed only with negotiation" notOverlap 10 "Overlap not supported by this implementation" objFull 11 "Objective registry full" objReg 12 "Objective already registered" notYourObj 13 "Objective not registered by this ASA" notObj 14 "Objective not found" notNeg 15 "Objective not negotiable" noSecurity 16 "No security" noDiscReply 17 "No reply to discovery" sockErrNegRq 18 "Socket error sending negotiation request" noSession 19 "No session" noSocket 20 "No socket" loopExhausted 21 "Loop count exhausted" sockErrNegStep 22 "Socket error sending negotiation step" noPeer 23 "No negotiation peer" CBORfail 24 "CBOR decode failure" invalidNeg 25 "Invalid Negotiate message" invalidEnd 26 "Invalid end message" noNegReply 27 "No reply to negotiation step" noValidStep 28 "No valid reply to negotiation step" sockErrWait 29 "Socket error sending wait message" sockErrEnd 30 "Socket error sending end message" IDclash 31 "Incoming request Session ID clash" notSynch 32 "Not a synchronization objective" notFloodDisc 33 "Not flooded and no reply to discovery" sockErrSynRq 34 "Socket error sending synch request" noListener 35 "No synch listener" noSynchReply 36 "No reply to synchronization request" noValidSynch 37 "No valid reply to synchronization request" invalidLoc 38 "Invalid locator" Carpenter, et al. Expires June 26, 2018 [Page 23] Internet-Draft GRASP API December 2017 Appendix B. Change log [RFC Editor: Please remove] draft-ietf-anima-grasp-api-00, 2017-12-23: WG adoption Editorial improvements. draft-liu-anima-grasp-api-06, 2017-11-24: Improved description of event-loop model. Changed intended status to Informational. Editorial improvements. draft-liu-anima-grasp-api-05, 2017-10-02: Added send_invalid() draft-liu-anima-grasp-api-04, 2017-06-30: Noted that simple nodes might not include the API. Minor clarifications. draft-liu-anima-grasp-api-03, 2017-02-13: Changed error return to integers. Required all implementations to accept objective values in CBOR. Added non-blocking alternatives. draft-liu-anima-grasp-api-02, 2016-12-17: Updated for draft-ietf-anima-grasp-09 draft-liu-anima-grasp-api-02, 2016-09-30: Added items for draft-ietf-anima-grasp-07 Editorial corrections draft-liu-anima-grasp-api-01, 2016-06-24: Updated for draft-ietf-anima-grasp-05 Carpenter, et al. Expires June 26, 2018 [Page 24] Internet-Draft GRASP API December 2017 Editorial corrections draft-liu-anima-grasp-api-00, 2016-04-04: Initial version Authors' Addresses Brian Carpenter Department of Computer Science University of Auckland PB 92019 Auckland 1142 New Zealand Email: brian.e.carpenter@gmail.com Bing Liu (editor) Huawei Technologies Q22, Huawei Campus No.156 Beiqing Road Hai-Dian District, Beijing 100095 P.R. China Email: leo.liubing@huawei.com Wendong Wang BUPT University Beijing University of Posts & Telecom. No.10 Xitucheng Road Hai-Dian District, Beijing 100876 P.R. China Email: wdwang@bupt.edu.cn Xiangyang Gong BUPT University Beijing University of Posts & Telecom. No.10 Xitucheng Road Hai-Dian District, Beijing 100876 P.R. China Email: xygong@bupt.edu.cn Carpenter, et al. Expires June 26, 2018 [Page 25]