Network Working Group J. Dong Internet-Draft Z. Li Intended status: Standards Track Huawei Technologies Expires: 23 August 2024 C. Xie C. Ma China Telecom G. Mishra Verizon Inc. 20 February 2024 Carrying Network Resource Partition (NRP) Information in IPv6 Extension Header draft-ietf-6man-enhanced-vpn-vtn-id-06 Abstract Virtual Private Networks (VPNs) provide different customers with logically separated connectivity over a common network infrastructure. With the introduction and evolvement of 5G and also in some existing network scenarios, some customers may require network connectivity services with advanced features comparing to conventional VPN services. Such kind of network service is called enhanced VPNs. Enhanced VPNs can be used, for example, to deliver network slice services. A Network Resource Partition (NRP) is a subset of the network resources and associated policies on each of a connected set of links in the underlay network. An NRP could be used as the underlay to support one or a group of enhanced VPN services. For packet forwarding in a specific NRP, some fields in the data packet are used to identify the NRP the packet belongs to, so that NRP-specific processing can be performed on each node along a path in the NRP. This document specifies a new IPv6 Hop-by-Hop option to carry the NRP related information in data packets, which could be used to identify the NRP-specific processing to be performed on the packets by each network node along a network path in the NRP. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Dong, et al. Expires 23 August 2024 [Page 1] Internet-Draft IPv6 NRP Option February 2024 Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on 23 August 2024. Copyright Notice Copyright (c) 2024 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1.1. Requirements Language . . . . . . . . . . . . . . . . . . 4 2. New IPv6 Extension Header Option for NRP . . . . . . . . . . 4 3. Procedures . . . . . . . . . . . . . . . . . . . . . . . . . 5 3.1. Adding NRP Option to Packets . . . . . . . . . . . . . . 6 3.2. NRP-specific Packet Forwarding . . . . . . . . . . . . . 6 4. Operational Considerations . . . . . . . . . . . . . . . . . 7 5. Considerations about Generalization . . . . . . . . . . . . . 7 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 8 7. Security Considerations . . . . . . . . . . . . . . . . . . . 9 8. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 9 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 9 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 9 10.1. Normative References . . . . . . . . . . . . . . . . . . 9 10.2. Informative References . . . . . . . . . . . . . . . . . 10 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 11 1. Introduction Virtual Private Networks (VPNs) [RFC4026] provide different customers with logically isolated connectivity over a common network infrastructure. With the introduction and evolvement of 5G and also in some existing network scenarios, some customers may require network connectivity services with advanced features comparing to conventional VPNs, such as resource isolation from other services or Dong, et al. Expires 23 August 2024 [Page 2] Internet-Draft IPv6 NRP Option February 2024 guaranteed performance. Such kind of network service is called enhanced VPN [I-D.ietf-teas-enhanced-vpn]. Enhanced VPN service requires the coordination and integration between the overlay VPNs and the capability and resources of the underlay network. Enhanced VPN can be used, for example, to deliver IETF network slice services [I-D.ietf-teas-ietf-network-slices]. [I-D.ietf-teas-ietf-network-slices] also introduces the concept of the Network Resource Partition (NRP), which is a subset of the buffer/queuing/scheduling resources and associated policies on each of a connected set of links in the underlay network. An NRP can be associated with a logical network topology to select or specify the set of links and nodes involved. [I-D.ietf-teas-enhanced-vpn] specifies the framework of NRP-based enhanced VPN and describes the candidate component technologies in different network planes and network layers. An NRP could be used as the underlay to meet the requirement of one or a group of enhanced VPN services. In packet forwarding, traffic of different Enhanced VPN services needs to be processed separately based on the network resources and the logical topology associated with the corresponding NRP. [I-D.ietf-teas-nrp-scalability] describes the scalability considerations and the possible optimizations for providing a relatively large number of NRPs. One approach to improve the data plane scalability of NRP is to introduce a dedicated NRP ID in the data packet to identify the set of network resources allocated to an NRP, so that packets in an NRP can be processed and forwarded using the NRP-specific network resources, which could avoid possible resource competition with services in other NRPs. An NRP ID can have network resource semantics, which represents a subset of the resources (e.g. bandwidth, buffer and queuing resources) allocated on a given set of links and nodes which constitute a logical network topology. The logical topology of an NRP could be defined and identified using mechanisms such as Multi-Topology [RFC4915], [RFC5120] or Flex-Algo [RFC9350]. This document specifies a mechanism to carry NRP related information in a new IPv6 Hop-by-Hop option (Section 4.3 of [RFC8200]) called "NRP option". The NRP option is parsed by every intermediate node along the forwarding path, and the obtained NRP ID is used to invoke NRP-specific packet processing and forwarding using the set of NRP- specific resources. This provides a scalable solution to support a relatively large number of NRPs in an IPv6 network [I-D.ietf-teas-nrp-scalability]. Dong, et al. Expires 23 August 2024 [Page 3] Internet-Draft IPv6 NRP Option February 2024 Although in this document the application of the NRP option is to indicate the NRP-specific resource information, the NRP option is considered as a generic mechanism to convey network wide NRP ID and information with different semantics to meet the possible use cases in the future. Some considerations about generalization are described in Section 5. 1.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. 2. New IPv6 Extension Header Option for NRP A new Hop-by-Hop option (Section 4.3 of [RFC8200]) type "NRP" is defined to carry the NRP related information. Its format is shown in Figure 1. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Option Type | Opt Data Len | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Flags | Context Type | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ ~ NRP ID ~ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Figure 1. The format of NRP Option Option Type: 8-bit identifier of the type of option. The type of NRP option is to be assigned by IANA. The bits of the type field are defined as below: * BB 00 The highest-order 2 bits are set to 00 to indicate that a node which does not recognize this type will skip over it and continue processing the header. * C 0 The third highest-order bit is set to 0 to indicate this option does not change en route. * TTTTT To be assigned by IANA. Opt Data Len: 8-bit unsigned integer indicates the length of the option Data field of this option, in octets. Dong, et al. Expires 23 August 2024 [Page 4] Internet-Draft IPv6 NRP Option February 2024 Flags: 8-bit flags field. The most significant bit is defined in this document. 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |S|U U U U U U U| +-+-+-+-+-+-+-+-+ * S (Strict Match): The S flag is used to indicate whether the NRP ID MUST be strictly matched for the processing of the packet. It provides an approach for fine granular control of packet forwarding behavior when the NRP ID is not matched. If the NRP ID in the NRP option does not match with any of the NRP ID provisioned on the network node and the S flag is set to 1, the packet MUST be dropped. If the NRP ID does not match with any of the NRP ID provisioned on the network node and the S flag is set to 0, the packet MUST be forwarded using the default behavior as if the NRP option does not exist. * U (Unused): These flags are reserved for future use. They MUST be set to 0 on transmission and MUST be ignored on receipt. Context Type (CT): One-octet field used to indicate the semantics and length of the NRP ID carried in the option. The context value defined in this document is as follows: * CT=0: The NRP ID is a 4-octet network-wide unique resource ID, which is used to identify the subset of network resources allocated to the NRP on the involved network nodes and links. Reserved: 2-octet field reserved for future use. They MUST be set to 0 on transmission and MUST be ignored on receipt. NRP ID: The identifier of a Network Resource Partition, the semantics and length of the ID is determined by the Context Type. Note that, in the context of 5G network slicing, if a deployment found it useful, the four-octet NRP ID field may be derived from the four-octet Single Network Slice Selection Assistance Information (S-NSSAI) defined in 3GPP [TS23501]. 3. Procedures This section describes the procedures for NRP option processing when the Context Type in the NRP option is set to 0. The processing procedures for NRP option with other Context Types are out of the scope of this document and will be specified in separate documents which introduce those Context Types. Dong, et al. Expires 23 August 2024 [Page 5] Internet-Draft IPv6 NRP Option February 2024 3.1. Adding NRP Option to Packets When an ingress node of an IPv6 domain receives a packet, according to the traffic classification and mapping policy, the packet needs to be steered into one of the NRPs in the network, then the packet MUST be encapsulated in an outer IPv6 header with the source and destination addresses set according to the policy, and the NRP ID of the NRP which the packet is mapped to according to the policy MUST be carried in the NRP option of the Hop-by-Hop Options header, which is associated with the outer IPv6 header. 3.2. NRP-specific Packet Forwarding On receipt of a packet with the NRP option, each network node which can process the Hop-by-Hop Options header and the NRP option in fast path [I-D.ietf-6man-hbh-processing] MUST use the NRP ID to determine the set of local network resources which are allocated to the NRP. The packet forwarding behavior is based on both the destination IP address and the NRP ID. More specifically, the destination IP address SHOULD be used to determine the next-hop and the outgoing interface, and NRP ID SHOULD be used to determine the set of network resources on the outgoing interface which are allocated to the NRP for processing and sending the packet. If the NRP ID does not match with any of the NRP ID provisioned on the outgoing interface, the S flag in the NRP option SHOULD be used to determine whether the packet should be dropped or forwarded using the default set of network resources of the outgoing interface. The Traffic Class field of the outer IPv6 header MAY be used to provide differentiated treatment for packets which belong to the same NRP. The egress node of the IPv6 domain MUST decapsulate the outer IPv6 header and the Hop-by-Hop Options header which includes the NRP option. In the forwarding plane, there can be different approaches of partitioning the local network resources and allocating them to different NRPs. For example, on one physical interface, a subset of the forwarding plane resources (e.g. bandwidth and the associated buffer and queuing resources) can be allocated to a particular NRP and represented as a virtual sub-interface or a data channel with reserved bandwidth resource. In packet forwarding, the IPv6 destination address of the received packet is used to identify the next-hop and the outgoing layer-3 interface, and the NRP ID is used to further identify the virtual sub-interface or the data channel on the outgoing interface which is associated with the NRP. Network nodes which do not support the processing of Hop-by-Hop Options header SHOULD ignore the Hop-by-Hop options header and forward the packet only based on the destination IP address. Network nodes which support Hop-by-Hop Options header, but do not support the Dong, et al. Expires 23 August 2024 [Page 6] Internet-Draft IPv6 NRP Option February 2024 NRP option SHOULD ignore the NRP option and forward the packet only based on the destination IP address. The network node MAY process the rest of the Hop-by-Hop options in the Hop-by-Hop Options header. 4. Operational Considerations As described in [RFC8200], network nodes may be configured to ignore the Hop-by-Hop Options header, drop packets containing a Hop-by-Hop Options header, or assign packets containing a Hop-by-Hop Options header to a slow processing path. In networks with such network nodes, it is important that packets of an NRP are not dropped due to the existence of the Hop-by-Hop Options header. Operators need to make sure that all the network nodes involved in an NRP can either process the Hop-by-Hop Options header in the fast path, or ignore the Hop-by-Hop Options header. Since an NRP is associated with a logical network topology, one practical approach is to ensure that all the network nodes involved in that logical topology support the processing of the Hop-by-Hop Options header and the NRP option in the fast path, and constrain the packet forwarding path to the logical topology of the NRP. [I-D.ietf-6man-hbh-processing] specifies the modified procedures for the processing of IPv6 Hop-by-Hop Options header, with the purpose of making the Hop-by-Hop Options header useful. Network nodes complying with [I-D.ietf-6man-hbh-processing] will not drop packets with Hop- by-Hop Options header and the NRP option. 5. Considerations about Generalization During the discussion of this document in the 6MAN WG, one of the suggestions received is to make the NRP option more generic in terms of semantics and encoding. This section gives some analysis about to what extent the semantics of NRP could be generalized, and how the generalization could be achieved with the proposed encoding. Based on the NRP definition in [I-D.ietf-teas-ietf-network-slices], the concept of NRP could be extended as: an underlay network construct which is associated with a set of network-wide attributes and states maintained on each participating network node. The attributes associated with an NRP may include but not limited to: network resource attributes, network topology attributes, and network function attributes etc. * The network resource can refer to various type of data plane resources, including link bandwidth, bufferage and queueing resources. Dong, et al. Expires 23 August 2024 [Page 7] Internet-Draft IPv6 NRP Option February 2024 * The network topology can be multipoint-to-multipoint, point-to- point, point-to-multipoint or multipoint-to-point. * The network functions may include both data forwarding actions and other types network functions which can be executed on data packets mapped to an NRP. This shows the semantics of NRP can be quite generic. Although generalization is something good to have, it would be important to understand and identify the boundary of generalization. In this document, It is anticipated that for one network attribute to be included in NRP, it needs to be a network-wide attribute rather than a node-specific attribute. Thus whether a network-wide view can be provided or not could be considered as one prerequisite of making one attribute part of the NRP option. The format of the NRP option contains the Flags field, the Context Type field and the Reserved field, which provide the capability for future extensions. That said, since the NRP option needs to be processed by network nodes in the fast path, the capability of network devices need to be considered when new semantics and encoding are introduced. 6. IANA Considerations This document requests IANA to assign a new option type from "Destination Options and Hop-by-Hop Options" registry [IANA-HBH]. Hex Value Binary Value Description Reference act chg rest ----------------------------------------------------------- TBA 00 0 tba NRP Option [this document] This document requests IANA to create a new registry for the "NRP Option Context Type" under the "Internet Protocol Version 6 (IPv6) Parameters" registry. The allocation policy of this registry is "Standards Action". The initial codepoints are assigned by this document as follows: Value Description Reference ----------------------------------------------- 0 Resource ID [this document] 1-254 Unassigned 255 Reserved [this document] Dong, et al. Expires 23 August 2024 [Page 8] Internet-Draft IPv6 NRP Option February 2024 7. Security Considerations The security considerations with IPv6 Hop-by-Hop Options header are described in [RFC8200], [RFC7045], [RFC9098] [RFC9099] and [I-D.ietf-6man-hbh-processing]. This document introduces a new IPv6 Hop-by-Hop option which is either processed in the fast path or ignored by network nodes, thus it does not introduce additional security issues. 8. Contributors Zhibo Hu Email: huzhibo@huawei.com Lei Bao Email: baolei7@huawei.com 9. Acknowledgements The authors would like to thank Juhua Xu, James Guichard, Joel Halpern, Tom Petch, Aijun Wang, Zhenqiang Li, Tom Herbert, Adrian Farrel, Eric Vyncke, Erik Kline and Mohamed Boucadair for their review and valuable comments. 10. References 10.1. Normative References [I-D.ietf-teas-enhanced-vpn] Dong, J., Bryant, S., Li, Z., Miyasaka, T., and Y. Lee, "A Framework for NRP-based Enhanced Virtual Private Network", Work in Progress, Internet-Draft, draft-ietf-teas- enhanced-vpn-17, 25 December 2023, . [I-D.ietf-teas-ietf-network-slices] Farrel, A., Drake, J., Rokui, R., Homma, S., Makhijani, K., Contreras, L. M., and J. Tantsura, "A Framework for Network Slices in Networks Built from IETF Technologies", Work in Progress, Internet-Draft, draft-ietf-teas-ietf- network-slices-25, 14 September 2023, . [IANA-HBH] "IANA, "Destination Options and Hop-by-Hop Options"", 2016, . Dong, et al. Expires 23 August 2024 [Page 9] Internet-Draft IPv6 NRP Option February 2024 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . [RFC8200] Deering, S. and R. Hinden, "Internet Protocol, Version 6 (IPv6) Specification", STD 86, RFC 8200, DOI 10.17487/RFC8200, July 2017, . 10.2. Informative References [I-D.ietf-6man-hbh-processing] Hinden, R. M. and G. Fairhurst, "IPv6 Hop-by-Hop Options Processing Procedures", Work in Progress, Internet-Draft, draft-ietf-6man-hbh-processing-13, 18 February 2024, . [I-D.ietf-teas-nrp-scalability] Dong, J., Li, Z., Gong, L., Yang, G., Mishra, G. S., and F. Qin, "Scalability Considerations for Network Resource Partition", Work in Progress, Internet-Draft, draft-ietf- teas-nrp-scalability-03, 21 October 2023, . [RFC4026] Andersson, L. and T. Madsen, "Provider Provisioned Virtual Private Network (VPN) Terminology", RFC 4026, DOI 10.17487/RFC4026, March 2005, . [RFC4915] Psenak, P., Mirtorabi, S., Roy, A., Nguyen, L., and P. Pillay-Esnault, "Multi-Topology (MT) Routing in OSPF", RFC 4915, DOI 10.17487/RFC4915, June 2007, . [RFC5120] Przygienda, T., Shen, N., and N. Sheth, "M-ISIS: Multi Topology (MT) Routing in Intermediate System to Intermediate Systems (IS-ISs)", RFC 5120, DOI 10.17487/RFC5120, February 2008, . Dong, et al. Expires 23 August 2024 [Page 10] Internet-Draft IPv6 NRP Option February 2024 [RFC7045] Carpenter, B. and S. Jiang, "Transmission and Processing of IPv6 Extension Headers", RFC 7045, DOI 10.17487/RFC7045, December 2013, . [RFC9098] Gont, F., Hilliard, N., Doering, G., Kumari, W., Huston, G., and W. Liu, "Operational Implications of IPv6 Packets with Extension Headers", RFC 9098, DOI 10.17487/RFC9098, September 2021, . [RFC9099] Vyncke, É., Chittimaneni, K., Kaeo, M., and E. Rey, "Operational Security Considerations for IPv6 Networks", RFC 9099, DOI 10.17487/RFC9099, August 2021, . [RFC9350] Psenak, P., Ed., Hegde, S., Filsfils, C., Talaulikar, K., and A. Gulko, "IGP Flexible Algorithm", RFC 9350, DOI 10.17487/RFC9350, February 2023, . [TS23501] "3GPP TS23.501", 2016, . Authors' Addresses Jie Dong Huawei Technologies Huawei Campus, No. 156 Beiqing Road Beijing 100095 China Email: jie.dong@huawei.com Zhenbin Li Huawei Technologies Huawei Campus, No. 156 Beiqing Road Beijing 100095 China Email: lizhenbin@huawei.com Dong, et al. Expires 23 August 2024 [Page 11] Internet-Draft IPv6 NRP Option February 2024 Chongfeng Xie China Telecom China Telecom Beijing Information Science & Technology, Beiqijia Beijing 102209 China Email: xiechf@chinatelecom.cn Chenhao Ma China Telecom China Telecom Beijing Information Science & Technology, Beiqijia Beijing 102209 China Email: machh@chinatelecom.cn Gyan Mishra Verizon Inc. Email: gyan.s.mishra@verizon.com Dong, et al. Expires 23 August 2024 [Page 12]