Network Working Group D. Hardt
Internet-Draft Amazon
Intended status: Standards Track October 30, 2017
Expires: May 3, 2018

Distributed OAuth
draft-hardt-distributed-oauth-00

Abstract

The OAuth client credentials grant The Distributed OAuth profile enables an OAuth client using the client credentials grant to discover what authorization server to use for a given resource server, and what attribute values to provide in the access token request.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on May 3, 2018.

Copyright Notice

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

1. Introduction

In [RFC6749], there is a single resource server and authorization server. In more complex and distributed systems, a clients may access many different resource servers, which have different authorization servers managing access. For example, a client may be accessing two different resources that provides similar funcationility, but each is in a different geopolitical region, which requires authorization from authorization servers located in each geopolitical region.

A priori knownledge by the client of the relationships between resource servers and authorizations servers is not practical as the number of resource servers and authorization servers scales up. The client needs to discover on-demand which authorization server to request authorization for a given resource, and what attributes to pass. Being able to discover how to access a protected resource also enables more flexible software development as changes to the scopes, realms and authorization servers can happen dynamically with no change to client code.

1.1. Notational Conventions

In this document, the key words “MUST”, “MUST NOT”, “REQUIRED”, “SHALL”, “SHALL NOT”, “SHOULD”, “SHOULD NOT”, “RECOMMENDED”, “MAY”, and “OPTIONAL” are to be interpreted as described in BCP 14, [RFC2119].

1.2. Terminology

Issuer: the party issuing the access token, also known as the authorization server.

All other terms are as defined in [RFC6749] and [RFC6750]

1.3. Protocol Overview

Figure 1 shows an abstract flow of distributed OAuth.

 +--------+                               +---------------+
 |        |--(A)-- Discovery Request ---->|   Resource    |
 |        |                               |    Server     |
 |        |<-(B)-- Discovery Response ----|               |
 |        |                               +---------------+
 |        |
 |        |                               +---------------+
 |        |--(C)- Authorization Request ->| Authorization |
 | Client |                               |     Server    |
 |        |<-(D)----- Access Token -------|               |
 |        |                               +---------------+
 |        |
 |        |                               +---------------+
 |        |--(E)----- Access Token ------>|    Resource   |
 |        |                               |     Server    |
 |        |<-(F)--- Protected Resource ---|               |
 +--------+                               +---------------+

            Figure 1: Abstract Protocol Flow

There are three steps where there are changes from the OAuth client credential grant:

1) A discovery request (A) and discovery resopnse (B) where the client discovers what is required to make an authenticated request. The client makes a request to the protected resource without supplying the Authorization header. The resource server responds with a HTTP 401 response code and the “iss” attribute in the “WWW-Authenticate” header. The client notes the “host” value from the TLS

2) An authorization request (C) to an authorization server listed in the “iss” attribute and includes the “host” attribute. The authorization servers provides an access token that includes the “host” value.

3) An authenticated request (E) to the resource server that confirms the “host” matches expected values.

2. Authorization Server Discovery

Figure 1, step (A)

To access a protected resource, the client needs to learn the authorization servers or issuers that can issue access tokens that are acceptable to the protected resource. There may be one or more issuers that can issue access tokens for the protected resource. To discover the issuers, the client makes an unauthenticated call to the protected resource, with no HTTP “Authorization” request header field as defined in [RFC6750] section 2.1. The client notes the hostname of the protected resource that was confirmed by the TLS connection, and saves it as the “host” attribute.

Figure 1, step (B)

The resource server responds with the “WWW-Authenticate” HTTP header that MAY incldue the “scope” and “realm” attribute per [RFC6750] section 3, and MUST include the “iss” attribute. The “iss” attribute has one or more space delimited URLs.

For example (with extra line breaks for display purposes only):

    HTTP/1.1 401 Unauthorized
    WWW-Authenticate: Bearer realm="example_realm",
                             iss="http://issuer.example.com/token",
                             scope="example_scope",
                             error="invalid_token"

3. Access Token Request

Figure 1, step (C)

The client makes an access token request to the issuer URL specified by the “iss” attribute, or if more than one value, a randomly selected URL from the list. If the client is unable to connect to the issuer, then the client MAY try to connect to another URL from the list.

The client SHOULD authenticate to the issuer using a proof of possession mechanism such as mutual TLS or a signed token containing the issuer as the audience

The client makes the access token request per [RFC6749] section 4.4, Client Credentials Grant and MUST include the “host” attribute, for example (with extra line breaks for display purposes only):

    POST /token HTTP/1.1
    Host: issuer.example.com
    Authorization: Basic czZCaGRSa3F0MzpnWDFmQmF0M2JW
    Content-Type: application/x-www-form-urlencoded

    grant_type=client_credentials
    &scope="example scope"
    &host=resource.example.com
    &realm="example_realm"

Figure 1, step (D)

The authorization server returns an access token that MUST include the “host” attribute or a reference that includes the “host” attribute.

4. Accessing Protected Resource

Figure 1, step (E)

The client access the protected resource per [RFC6750] section 2.1. The distributed oauth profile SHALL only use the authorization request header field for passing the access token.

Figure 1, step (F)

The protected resource MUST verify the “host” attribute is the host of the resource server the protected resource is hosted.

5. New Threats

THree new threats emerge when the client is dynamically discovering the authorization server and the request attributes: access token reuse, resource server impersonation, and malicious issuer.

5.1. Access Token Reuse

A malicious resource server impersonates the client and reuses the access token provided by the client to the malicious resource server with another resource server.

This is mitigated by inclusion of the “host” property in the acces token, so that only the access token is only accepted at the intended host.

5.2. Resource Server Impersonation

A malicious resource server tells a client to obtain an access token that can be used at a different resource server. When the client presents the acces token, the malicious resource server uses the access token to access another resource server.

This is mitigated by the client obtaining the “host” value from the TLS certificate rather than being declared by the resource server.

5.3. Malicious Issuer

A malicious resource server could redirect the client to a malicious issuer, or the issuer may be malicious. The malicious issuer may replay the client credentials with a valid issuer and obtain a valid access token for a protected resource.

This attack is mitigated by the client using a proof of possion authentication mechanism with the issuer such as mutual TLS or a signed token containing the issuer as the audience.

6. IANA Considerations

TBD.

7. Acknowledgements

TBD.

8. Normative References

[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC6749] Hardt, D., "The OAuth 2.0 Authorization Framework", RFC 6749, DOI 10.17487/RFC6749, October 2012.
[RFC6750] Jones, M. and D. Hardt, "The OAuth 2.0 Authorization Framework: Bearer Token Usage", RFC 6750, DOI 10.17487/RFC6750, October 2012.

Appendix A. Document History

A.1. draft-hardt-distributed-oauth-00

Author's Address

Dick Hardt Amazon EMail: dick.hardt@gmail.com

Table of Contents