Network Working Group P. Hallam-Baker Internet-Draft August 15, 2019 Intended status: Informational Expires: February 16, 2020 Mathematical Mesh 3.0 Part II: Uniform Data Fingerprint. draft-hallambaker-mesh-udf-06 Abstract This document describes the naming and addressing schemes used in the Mathematical Mesh. The means of generating Uniform Data Fingerprint (UDF) values and their presentation as text sequences and as URIs are described. A UDF consists of a binary sequence, the initial eight bits of which specify a type identifier code. Type identifier codes have been selected so as to provide a useful mnemonic indicating their purpose when presented in Base32 encoding. Two categories of UDF are described. Data UDFs provide a compact presentation of a fixed length binary data value in a format that is convenient for data entry. A Data UDF may represent a cryptographic key, a nonce value or a share of a secret. Fingerprint UDFs provide a compact presentation of a Message Digest or Message Authentication Code value. A Strong Internet Name (SIN) consists of a DNS name which contains at least one label that is a UDF fingerprint of a policy document controlling interpretation of the name. SINs allow a direct trust model to be applied to achieve end-to-end security in existing Internet applications without the need for trusted third parties. UDFs may be presented as URIs to form either names or locators for use with the UDF location service. An Encrypted Authenticated Resource Locator (EARL) is a UDF locator URI presenting a service from which an encrypted resource may be obtained and a symmetric key that may be used to decrypt the content. EARLs may be presented on paper correspondence as a QR code to securely provide a machine- readable version of the same content. This may be applied to automate processes such as invoicing or to provide accessibility services for the partially sighted. [Note to Readers] Hallam-Baker Expires February 16, 2020 [Page 1] Internet-Draft Mesh UDF August 2019 Discussion of this draft takes place on the MATHMESH mailing list (mathmesh@ietf.org), which is archived at https://mailarchive.ietf.org/arch/search/?email_list=mathmesh. This document is also available online at http://mathmesh.com/Documents/draft-hallambaker-mesh-udf.html [1] . Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on February 16, 2020. Copyright Notice Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1. UDF Types . . . . . . . . . . . . . . . . . . . . . . . . 5 1.1.1. Cryptographic Keys and Nonces . . . . . . . . . . . . 5 1.1.2. Fingerprint type UDFS . . . . . . . . . . . . . . . . 6 1.2. UDF URIs . . . . . . . . . . . . . . . . . . . . . . . . 7 1.2.1. Name Form . . . . . . . . . . . . . . . . . . . . . . 7 1.2.2. Locator Form . . . . . . . . . . . . . . . . . . . . 7 Hallam-Baker Expires February 16, 2020 [Page 2] Internet-Draft Mesh UDF August 2019 1.3. Secure Internet Names . . . . . . . . . . . . . . . . . . 9 2. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 10 2.1. Requirements Language . . . . . . . . . . . . . . . . . . 10 2.2. Defined Terms . . . . . . . . . . . . . . . . . . . . . . 10 2.3. Related Specifications . . . . . . . . . . . . . . . . . 11 2.4. Implementation Status . . . . . . . . . . . . . . . . . . 11 3. Architecture . . . . . . . . . . . . . . . . . . . . . . . . 11 3.1. Base32 Presentation . . . . . . . . . . . . . . . . . . . 12 3.1.1. Precision Improvement . . . . . . . . . . . . . . . . 12 3.2. Type Identifier . . . . . . . . . . . . . . . . . . . . . 12 3.3. Content Type Identifier . . . . . . . . . . . . . . . . . 13 3.4. Truncation . . . . . . . . . . . . . . . . . . . . . . . 14 3.4.1. Compression . . . . . . . . . . . . . . . . . . . . . 14 3.5. Presentation . . . . . . . . . . . . . . . . . . . . . . 15 3.6. Alternative Presentations . . . . . . . . . . . . . . . . 15 3.6.1. Word Lists . . . . . . . . . . . . . . . . . . . . . 15 3.6.2. Image List . . . . . . . . . . . . . . . . . . . . . 16 4. Fixed Length UDFs . . . . . . . . . . . . . . . . . . . . . . 16 4.1. Nonce Type . . . . . . . . . . . . . . . . . . . . . . . 16 4.2. OID Identified Sequence . . . . . . . . . . . . . . . . . 16 4.3. Encryption/Authentication Type . . . . . . . . . . . . . 17 4.4. Shamir Shared Secret . . . . . . . . . . . . . . . . . . 18 4.4.1. Secret Generation . . . . . . . . . . . . . . . . . . 19 4.4.2. Recovery . . . . . . . . . . . . . . . . . . . . . . 19 5. Variable Length UDFs . . . . . . . . . . . . . . . . . . . . 21 5.1. Content Digest . . . . . . . . . . . . . . . . . . . . . 22 5.1.1. Content Digest Value . . . . . . . . . . . . . . . . 22 5.1.2. Typed Content Digest Value . . . . . . . . . . . . . 22 5.1.3. Compression . . . . . . . . . . . . . . . . . . . . . 23 5.1.4. Presentation . . . . . . . . . . . . . . . . . . . . 23 5.1.5. Example Encoding . . . . . . . . . . . . . . . . . . 24 5.1.6. Using SHA-2-512 Digest . . . . . . . . . . . . . . . 24 5.1.7. Using SHA-3-512 Digest . . . . . . . . . . . . . . . 25 5.1.8. Using SHA-2-512 Digest with Compression . . . . . . . 26 5.1.9. Using SHA-3-512 Digest with Compression . . . . . . . 27 5.2. Authenticator UDF . . . . . . . . . . . . . . . . . . . . 27 5.2.1. Content Digest Value . . . . . . . . . . . . . . . . 28 5.2.2. Authentication Value . . . . . . . . . . . . . . . . 28 5.3. Content Type Values . . . . . . . . . . . . . . . . . . . 30 5.3.1. PKIX Certificates and Keys . . . . . . . . . . . . . 31 5.3.2. OpenPGP Key . . . . . . . . . . . . . . . . . . . . . 31 5.3.3. DNSSEC . . . . . . . . . . . . . . . . . . . . . . . 32 6. UDF URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 32 6.1. Name form . . . . . . . . . . . . . . . . . . . . . . . . 32 6.2. Locator form . . . . . . . . . . . . . . . . . . . . . . 33 6.2.1. DNS Web service discovery . . . . . . . . . . . . . . 33 6.2.2. Content Identifier . . . . . . . . . . . . . . . . . 33 6.2.3. Target URI . . . . . . . . . . . . . . . . . . . . . 34 Hallam-Baker Expires February 16, 2020 [Page 3] Internet-Draft Mesh UDF August 2019 6.2.4. Postprocessing . . . . . . . . . . . . . . . . . . . 34 6.2.5. Decryption and Authentication . . . . . . . . . . . . 34 6.2.6. QR Presentation . . . . . . . . . . . . . . . . . . . 35 7. Strong Internet Names . . . . . . . . . . . . . . . . . . . . 35 8. Security Considerations . . . . . . . . . . . . . . . . . . . 35 8.1. Confidentiality . . . . . . . . . . . . . . . . . . . . . 35 8.2. Availability . . . . . . . . . . . . . . . . . . . . . . 35 8.3. Integrity . . . . . . . . . . . . . . . . . . . . . . . . 35 8.4. Work Factor and Precision . . . . . . . . . . . . . . . . 36 8.5. Semantic Substitution . . . . . . . . . . . . . . . . . . 37 8.6. QR Code Scanning . . . . . . . . . . . . . . . . . . . . 37 9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 38 9.1. Protocol Service Name . . . . . . . . . . . . . . . . . . 38 9.2. Well Known . . . . . . . . . . . . . . . . . . . . . . . 39 9.3. URI Registration . . . . . . . . . . . . . . . . . . . . 39 9.4. Media Types Registrations . . . . . . . . . . . . . . . . 39 9.4.1. Media Type: application/pkix-keyinfo . . . . . . . . 39 9.4.2. Media Type: application/udf-encryption . . . . . . . 40 9.4.3. Media Type: application/udf-secret . . . . . . . . . 41 9.5. Uniform Data Fingerprint Type Identifier Registry . . . . 42 9.5.1. The name of the registry . . . . . . . . . . . . . . 42 9.5.2. Required information for registrations . . . . . . . 42 9.5.3. Applicable registration policy . . . . . . . . . . . 43 9.5.4. Size, format, and syntax of registry entries . . . . 43 9.5.5. Initial assignments and reservations . . . . . . . . 43 10. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 44 11. Appendix A: Prime Values for Secret Sharing . . . . . . . . . 44 12. Recovering Shamir Shared Secret . . . . . . . . . . . . . . . 45 13. References . . . . . . . . . . . . . . . . . . . . . . . . . 47 13.1. Normative References . . . . . . . . . . . . . . . . . . 47 13.2. Informative References . . . . . . . . . . . . . . . . . 48 13.3. URIs . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 50 1. Introduction A Uniform Data Fingerprint (UDF) is a generalized format for presenting and interpreting short binary sequences representing cryptographic keys or fingerprints of data of any specified type. The UDF format provides a superset of the OpenPGP [RFC4880] fingerprint encoding capability with greater encoding density and readability. This document describes the syntax and encoding of UDFs, the means of constructing and comparing them and their use in other Internet addressing schemes. Hallam-Baker Expires February 16, 2020 [Page 4] Internet-Draft Mesh UDF August 2019 1.1. UDF Types Two categories of UDF are described. Data UDFs provide a compact presentation of a fixed length binary data value in a format that is convenient for data entry. A Data UDF may represent a cryptographic key or nonce value or a part share of a key generated using a secret sharing mechanism. Fingerprint UDFs provide a compact presentation of a Message Digest or Message Authentication Code value. Both categories of UDF are encoded as a UDF binary sequence, the first octet of which is a Type Identifier and the remaining octets specify the binary value according to the type identifier and data referenced. UDFs are typically presented to the user as a Base32 encoded sequence in groups of five characters separated by dashes. This format provides a useful balance between compactness and readability. The type identifier codes have been selected so as to provide a useful mnemonic when presented in Base32 encoding. The following are examples of UDF values: NC6B-EYP6-O3JR-54HY-IE45-FOUU-TIPQ EAR2-UJUY-H7TF-SFLK-CWAW-TKC4-O5HQ SAQG-A7BL-6YQ6-G5K3-HYKQ-I54D-VWHG-C MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 KCM5-7VB6-IJXJ-WKHX-NZQF-OKGZ-EWVN ACXQ-PQRC-54KV-6XXU-L3ZU-W2NZ-QVA5 OAYC-4MAH-AYBS-WZLQ-AUAA-GIYA-AQQE-E7UO-6QMY-7EGD-C63V-TROP-P2W5-HX6E-IDBE-YVJW-B4SY-GM5U-T2LF-7HQ Like email addresses, UDFs are not a Uniform Resource Identifier (URI) but may be expressed in URI form by adding the scheme identifier (UDF) for use in contexts where an identifier in URI syntax is required. A UDF URI MAY contain a domain name component allowing it to be used as a locator 1.1.1. Cryptographic Keys and Nonces A Nonce (N) UDF represents a short, fixed length randomly chosen binary value. Nonce UDFs are used within many Mesh protocols and data formats where it is necessary to represent a nonce value in text form. Nonce UDF: NC6B-EYP6-O3JR-54HY-IE45-FOUU-TIPQ Hallam-Baker Expires February 16, 2020 [Page 5] Internet-Draft Mesh UDF August 2019 An Encryption/Authentication (E) UDF has the same format as a Random UDF but is identified as being intended to be used as a symmetric key for encryption and/or authentication. KeyValue: 23 AA 26 98 3F E6 59 15 6A 15 81 69 A8 5C 77 4F Encryption/Authenticator UDF: EAR2-UJUY-H7TF-SFLK-CWAW-TKC4-O5HQ A Share (S) UDF also represents a short, fixed length binary value but only provides one share in secret sharing scheme. Recovery of the binary value requires a sufficient number of shares. Share UDFs are used in the Mesh to support key and data escrow operations without the need to rely on trusted hardware. A share UDF can be copied by hand or printed in human or machine-readable form (e.g. QR code). Key: EAR2-UJUY-H7TF-SFLK-CWAW-TKC4-O5HQ Share 0: SAQG-A7BL-6YQ6-G5K3-HYKQ-I54D-VWHG-C Share 1: SAQZ-2TRR-KQB6-BENB-CIKI-PBK6-72SX-G Share 2: SARN-UIBW-WHS5-3LPG-4YKA-VEZ2-J66I-K 1.1.2. Fingerprint type UDFS Fingerprint type UDFs contains a fingerprint value calculated over a content data item and an IANA media type. A Content Digest type UDF is a fingerprint type UDF in which the fingerprint is formed using a cryptographic algorithm. Two digest algorithms are currently supported, SHA-2-512 (M, for Merkle Damgard) and SHA-3-512 (K, for Keccak). The inclusion of the media type in the calculation of the UDF value provides protection against semantic substitution attacks in which content that has been found to be trustworthy when interpreted as one content type is presented in a context in which it is interpreted as a different content type in which it is unsafe. SHA-2-512: MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 SHA-3-512: KCM5-7VB6-IJXJ-WKHX-NZQF-OKGZ-EWVN An Authentication UDF (A) is formed in the same manner as a fingerprint but using a Message Authentication Code algorithm and a symmetric key. Hallam-Baker Expires February 16, 2020 [Page 6] Internet-Draft Mesh UDF August 2019 Authentication UDFs are used to express commitments and to provide a means of blinding fingerprint values within a protocol by means of a nonce. SHA-2-512: ACXQ-PQRC-54KV-6XXU-L3ZU-W2NZ-QVA5 1.2. UDF URIs The UDF URI scheme allows use of a UDF in contexts where a URF is expected. The UDF URI scheme has two forms, name and locator. 1.2.1. Name Form Name form UDF URIs identify a data resource but do not provide a means of discovery. The URI is simply the scheme (udf) followed by the UDF value: udf:MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 1.2.2. Locator Form Locator form UDF URIs identify a data resource and provide a hint that MAY provide a means of discovery. If the content is not available from the location indicated, content obtained from a different source that matches the fingerprint MAY be used instead. udf://MB5S-R4AJ-3FBT-7NHO-T26Z-2E6Y-WFH4 UDF locator form URIs presenting a fingerprint type UDF provide a tight binding of the content to the locator. This allows the resolved content to be verified and rejected if it has been modified. UDF locator form URIs presenting an Encryptor/Authenticator type UDF provide a mechanism for identification, discovery and decryption of encrypted content. UDF locators of this type are known as Encrypted/ Authenticated Resource Locators (EARLs). Regardless of the type of the embedded UDF, UDF locator form URIs are resolved by first performing DNS Web Service Discovery to identify the Web Service Endpoint for the mmm-udf service at the specified domain. Resolution is completed by presenting the Content Digest Fingerprint of the UDF value specified in the URI to the specified Web Service Endpoint and performing a GET method request on the result. Hallam-Baker Expires February 16, 2020 [Page 7] Internet-Draft Mesh UDF August 2019 For example, Alice subscribes to Example.com, a purveyor of cat and kitten images. The company generates paper and electronic invoices on a monthly basis. To generate the paper invoice, Example.com first creates a new encryption key: EDX6-OS5A-D4LO-IPT5-EVOR-4QFW-AZWE-4Q One or more electronic forms of the invoice are encrypted under the key EDX6-OS5A-D4LO-IPT5-EVOR-4QFW-AZWE-4Q and placed on the Example.com Web site so that the appropriate version is returned if Alice scans the QR code. The key is then converted to form an EARL for the example.com UDF resolution service: udf://example.com/EDX6-OS5A-D4LO-IPT5-EVOR-4QFW-AZWE-4Q The EARL is then rendered as a QR code: [[This figure is not viewable in this format. The figure is available at http://mathmesh.com/Documents/draft-hallambaker-mesh- udf.html [2].]] QR Code with embedded decryption and location key A printable invoice containing the QR code is now generated and sent to Alice. When Alice receives the invoice, she can pay it by simply scanning the invoice with a device that recognizes at least one of the invoice formats supported by Example.com. The UDF EARL locator shown above is resolved by first determining the Web Service Endpoint for the mmm-udf service for the domain example.com. Discover ("example.com", "mmm-udf") = https://example.com/.well-known/mmm-udf/ Next the fingerprint of the source UDF is obtained. UDF (EDX6-OS5A-D4LO-IPT5-EVOR-4QFW-AZWE-4Q) = MDWZ-WDB7-FZLG-46QL-UURR-FQ36-UQ2A-6YIX-BG4T-32A2-QHPE-5UPP-MMKA-3YR2 Hallam-Baker Expires February 16, 2020 [Page 8] Internet-Draft Mesh UDF August 2019 Combining the Web Service Endpoint and the fingerprint of the source UDF provides the URI from which the content is obtained using the normal HTTP GET method: https://example.com/.well-known/mmm-udf/MDWZ-WDB7-FZLG-46QL-UURR- FQ36-UQ2A-6YIX-BG4T-32A2-QHPE-5UPP-MMKA-3YR2 Having established that Alice can read postal mail sent to a physical address and having delivered a secret to that address, this process might be extended to provide a means of automating the process of enrolment in electronic delivery of future invoices. 1.3. Secure Internet Names A SIN is an Internet Identifier that contains a UDF fingerprint of a security policy document that may be used to verify the interpretation of the identifier. This permits traditional forms of Internet address such as URIs and RFC822 email addresses to be used to express a trusted address that is independent of any trusted third party. This document only describes the syntax and interpretation of the identifiers themselves. The means by which the security policy documents bound to an address govern interpretation of the name is discussed separately in [draft-hallambaker-mesh-trust] . For example, Example Inc holds the domain name example.com and has deployed a private CA whose root of trust is a PKIX certificate with the UDF fingerprint MB2GK-6DUF5-YGYYL-JNY5E-RWSHZ. Alice is an employee of Example Inc., she uses three email addresses: alice@example.com A regular email address (not a SIN). alice@mm--mb2gk-6duf5-ygyyl-jny5e-rwshz.example.com A strong email address that is backwards compatible. alice@example.com.mm--mb2gk-6duf5-ygyyl-jny5e-rwshz A strong email address that is backwards incompatible. All three forms of the address are valid RFC822 addresses and may be used in a legacy email client, stored in an address book application, etc. But the ability of a legacy client to make use of the address differs. Addresses of the first type may always be used. Addresses of the second type may only be used if an appropriate MX record is provisioned. Addresses of the third type will always fail unless the resolver understands that it is a SIN requiring special processing. Hallam-Baker Expires February 16, 2020 [Page 9] Internet-Draft Mesh UDF August 2019 These rules allow Bob to send email to Alice with either 'best effort' security or mandatory security as the circumstances demand. 2. Definitions This section presents the related specifications and standard, the terms that are used as terms of art within the documents and the terms used as requirements language. 2.1. Requirements Language The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] . 2.2. Defined Terms Cryptographic Digest Function A hash function that has the properties required for use as a cryptographic hash function. These include collision resistance, first pre-image resistance and second pre-image resistance. Content Type An identifier indicating how a Data Value is to be interpreted as specified in the IANA registry Media Types. Commitment A cryptographic primitive that allows one to commit to a chosen value while keeping it hidden to others, with the ability to reveal the committed value later. Data Value The binary octet stream that is the input to the digest function used to calculate a digest value. Data Object A Data Value and its associated Content Type Digest Algorithm A synonym for Cryptographic Digest Function Digest Value The output of a Cryptographic Digest Function Data Digest Value The output of a Cryptographic Digest Function for a given Data Value input. Fingerprint A presentation of the digest value of a data value or data object. Fingerprint Presentation The representation of at least some part of a fingerprint value in human or machine-readable form. Hallam-Baker Expires February 16, 2020 [Page 10] Internet-Draft Mesh UDF August 2019 Fingerprint Improvement The practice of recording a higher precision presentation of a fingerprint on successful validation. Fingerprint Work Hardening The practice of generating a sequence of fingerprints until one is found that matches criteria that permit a compressed presentation form to be used. The compressed fingerprint thus being shorter than but presenting the same work factor as an uncompressed one. Hash A function which takes an input and returns a fixed-size output. Ideally, the output of a hash function is unbiased and not correlated to the outputs returned to similar inputs in any predictable fashion. Precision The number of significant bits provided by a Fingerprint Presentation. Work Factor A measure of the computational effort required to perform an attack against some security property. 2.3. Related Specifications This specification makes use of Base32 [RFC4648] encoding, SHA-2 [SHA-2] and SHA-3 [SHA-3] digest functions in the derivation of basic fingerprints. The derivation of keyed fingerprints additionally requires the use of the HMAC [RFC2014] and HKDF [RFC5869] functions. Resolution of UDF URI Locators makes use of DNS Web Service Discovery [draft-hallambaker-web-service-discovery] . 2.4. Implementation Status The implementation status of the reference code base is described in the companion document [draft-hallambaker-mesh-developer] . 3. Architecture A Uniform Data Fingerprint (UDF) is a presentation of a UDF Binary Data Sequence. This document specifies seven UDF Binary Data Sequence types and one presentation. The first octet of a UDF Binary Data Sequence identifies the UDF type and is referred to as the Type identifier. UDF Binary Data Sequence types are either fixed length or variable length. A variable length Binary Data Sequence MUST be truncated for Hallam-Baker Expires February 16, 2020 [Page 11] Internet-Draft Mesh UDF August 2019 presentation. Fixed length Binary Data Sequences MUST not be truncated. 3.1. Base32 Presentation The default UDF presentation is Base32 Presentation. Variable length Binary Data Sequences are truncated to an integer multiple of 20 bits that provides the desired precision before conversion to Base32 form. Fixed length Binary Data Sequences are converted to Base32 form without truncation. After conversion to Base32 form, dash '-' characters are inserted between groups of 4 characters to aid reading. This representation improves the accuracy of both data entry and verification. 3.1.1. Precision Improvement Precision improvement is the practice of using a high precision UDF (e.g. 260 bits) calculated from content data that has been validated according to a lower precision UDF (e.g. 120 bits). This allows a lower precision UDF to be used in a medium such as a business card where space is constrained without compromising subsequent uses. Applications SHOULD make use of precision improvement wherever possible. 3.2. Type Identifier A Version Identifier consists of a single byte. The byte codes have been chosen so that the first character of the Base32 presentation of the UDF provides a mnemonic for its type. A SHA-2 fingerprint UDF will always have M (for Merkle Damgard) as the initial letter, a SHA-3 fingerprint UDF will always have K (for Keccak) as the initial letter, and so on. The following version identifiers are specified in this document: Hallam-Baker Expires February 16, 2020 [Page 12] Internet-Draft Mesh UDF August 2019 +---------+---------+------------------------------------------+ | Type ID | Initial | Algorithm | +---------+---------+------------------------------------------+ | 0 | A | HMAC-SHA-2-512 | | 32 | E | HKDF-AES-512 | | 80 | K | SHA-3-512 | | 81 | K | SHA-3-512 (20 bits compressed) | | 82 | K | SHA-3-512 (30 bits compressed) | | 83 | K | SHA-3-512 (40 bits compressed) | | 84 | K | SHA-3-512 (50 bits compressed) | | 96 | M | SHA-2-512 | | 97 | M | SHA-2-512 (20 bits compressed) | | 98 | M | SHA-2-512 (30 bits compressed) | | 99 | M | SHA-2-512 (40 bits compressed) | | 100 | M | SHA-2-512 (50 bits compressed) | | 104 | N | Nonce data | | 108 | O | OID distinguished sequence (DER encoded) | | 144 | S | Shamir Secret Sharing | +---------+---------+------------------------------------------+ Table 1 3.3. Content Type Identifier A secure cryptographic digest algorithm provides a unique digest value that is probabilistically unique for a particular byte sequence but does not fix the context in which a byte sequence is interpreted. While such ambiguity may be tolerated in a fingerprint format designed for a single specific field of use, it is not acceptable in a general-purpose format. For example, the SSH and OpenPGP applications both make use of fingerprints as identifiers for the public keys used but using different digest algorithms and data formats for representing the public key data. While no such vulnerability has been demonstrated to date, it is certainly conceivable that a crafty attacker might construct an SSH key in such a fashion that OpenPGP interprets the data in an insecure fashion. If the number of applications making use of fingerprint format that permits such substitutions is sufficiently large, the probability of a semantic substitution vulnerability being possible becomes unacceptably large. A simple control that defeats such attacks is to incorporate a content type identifier within the scope of the data input to the hash function. Hallam-Baker Expires February 16, 2020 [Page 13] Internet-Draft Mesh UDF August 2019 3.4. Truncation Different applications of fingerprints demand different tradeoffs between compactness of the representation and the number of significant bits. A larger the number of significant bits reduces the risk of collision but at a cost to convenience. Modern cryptographic digest functions such as SHA-2 produce output values of at least 256 bits in length. This is considerably larger than most uses of fingerprints require and certainly greater than can be represented in human readable form on a business card. Since a strong cryptographic digest function produces an output value in which every bit in the input value affects every bit in the output value with equal probability, it follows that truncating the digest value to produce a finger print is at least as strong as any other mechanism if digest algorithm used is strong. Using truncation to reduce the precision of the digest function has the advantage that a lower precision fingerprint of some data content is always a prefix of a higher prefix of the same content. This allows higher precision fingerprints to be converted to a lower precision without the need for special tools. 3.4.1. Compression The Content Digest UDF types make use of work factor compression. Additional type identifiers are used to indicate digest values with 20, 30, 40 or 50 trailing zero bits allowing a UDF fingerprint offering the equivalent of up to 150 bits of precision to be expressed in 20 characters instead of 30. To use compressed UDF identifiers, it is necessary to search for content that can be compressed. If the digest algorithm used is secure, this means that by definition, the fastest means of search is brute force. Thus, the reduction in fingerprint size is achieved by transferring the work factor from the attacker to the defender. To maintain a work factor of 2^120 with a 2^80 bits, it is necessary for the content generator to perform a brute force search at a cost of the order of 2^40 operations. For example, the smallest allowable work factor for a UDF presentation of a public key fingerprint is 92 bits. This would normally require a presentation with 20 significant characters. Reducing this to 16 characters requires a brute force search of approximately 10^6 attempts. Reducing this to 12 characters would require 10^12 attempts and to 10 characters, 10^15 attempts. Hallam-Baker Expires February 16, 2020 [Page 14] Internet-Draft Mesh UDF August 2019 Omission of support for higher levels of compression than 2^50 is intentional. In addition to allowing use of shorter presentations, work factor compression MAY be used as evidence of proof of work. 3.5. Presentation The presentation of a fingerprint is the format in which it is presented to either an application or the user. Base32 encoding is used to produce the preferred text representation of a UDF fingerprint. This encoding uses only the letters of the Latin alphabet with numbers chosen to minimize the risk of ambiguity between numbers and letters (2, 3, 4, 5, 6 and 7). To enhance readability and improve data entry, characters are grouped into groups of four. This means that each block of four characters represents an increase in work factor of approximately one million times. 3.6. Alternative Presentations Applications that support UDF MUST support use of the Base32 presentation. Applications MAY support alternative presentations. 3.6.1. Word Lists The use of a Word List to encode fingerprint values was introduced by Patrick Juola and Philip Zimmerman for the PGPfone application. The PGP Word List is designed to facilitate exchange and verification of fingerprint values in a voice application. To minimize the risk of misinterpretation, two-word lists of 256 values each are used to encode alternative fingerprint bytes. The compact size of the lists used allowed the compilers to curate them so as to maximize the phonetic distance of the words selected. The PGP Word List is designed to achieve a balance between ease of entry and verification. Applications where only verification is required may be better served by a much larger word list, permitting shorter fingerprint encodings. For example, a word list with 16384 entries permits 14 bits of the fingerprint to be encoded at once, 65536 entries permits encoding of 16 bits. These encodings allow a 120 bit fingerprint to be encoded in 9 and 8 words respectively. Hallam-Baker Expires February 16, 2020 [Page 15] Internet-Draft Mesh UDF August 2019 3.6.2. Image List An image list is used in the same manner as a word list affording rapid visual verification of a fingerprint value. For obvious reasons, this approach is not suited to data entry but is preferable for comparison purposes. An image list of 1,048,576 images would provide a 20 bit encoding allowing 120 bit precision fingerprints to be displayed in six images. 4. Fixed Length UDFs Fixed length UDFs are used to represent cryptographic keys, nonces and secret shares and have a fixed length determined by their function that cannot be truncated without loss of information. All fixed length Binary Data Sequence values are an integer multiple of eight bits. 4.1. Nonce Type A Nonce Type UDF consists of the type identifier octet 104 followed by the Binary Data Sequence value. The Binary Data Sequence value is an integer number of octets that SHOULD have been generated in accordance with processes and procedures that ensure that it is sufficiently unpredictable for the purposes of the protocol in which the value is to be used. Requirements for such processes and procedures are described in [RFC4086] . Nonce Type UDFs are intended for use in contexts where it is necessary for a randomly chosen value to be unpredictable but not secret. For example, the challenge in a challenge/response mechanism. 4.2. OID Identified Sequence An OID Identified Sequence Type UDF consists of the type identifier octet 108 followed by the Binary Data Sequence value. The Binary Data Sequence value is an octet sequence that contains the DER encoding of the following ASN.1 data: Hallam-Baker Expires February 16, 2020 [Page 16] Internet-Draft Mesh UDF August 2019 OIDInfo ::= SEQUENCE { algorithm AlgorithmIdentifier, data BIT STRING } AlgorithmIdentifier ::= SEQUENCE { algorithm OBJECT IDENTIFIER, parameters ANY DEFINED BY algorithm OPTIONAL } OID Identified Sequences are intended to allow arbitrary data sequences to be encoded in the UDF format without exhausting the limited type identifier space. In particular, OID Identified Sequences MAY be used to specify public and private key values. Given the following Ed25519 public key: 42 7E 8E F4 19 8F 90 C3 17 B7 59 C5 CF 7E AD D3 DF C4 40 C2 4C 55 36 0F 25 83 33 B4 9E 96 5F 9E The equivalent DER encoding is: 30 2E 30 07 06 03 2B 65 70 05 00 03 23 00 04 20 42 7E 8E F4 19 8F 90 C3 17 B7 59 C5 CF 7E AD D3 DF C4 40 C2 4C 55 36 0F 25 83 33 B4 9E 96 5F 9E To encode this key as a UDF OID sequence we prepend the value OID and convert to Base32: OAYC-4MAH-AYBS-WZLQ-AUAA-GIYA-AQQE-E7UO-6QMY-7EGD-C63V-TROP-P2W5-HX6E-IDBE-YVJW-B4SY-GM5U-T2LF-7HQ The corresponding UDF content digest value is more compact and allows us to identify the key unambiguously but does not provide the value: MD7J-UW6O-EUSZ-UWKO-JQTB-JFKY-EF5S 4.3. Encryption/Authentication Type An Encryption/Authentication Type UDF consists of the type identifier octet 0 followed by the Binary Data Sequence value. The Binary Data Sequence value is an integer number of octets that SHOULD have been generated in accordance with processes and procedures that ensure that it is sufficiently unpredictable and unguessable for the purposes of the protocol in which the value is to Hallam-Baker Expires February 16, 2020 [Page 17] Internet-Draft Mesh UDF August 2019 be used. Requirements for such processes and procedures are described in [RFC4086] . Encryption/Authentication Type UDFs are intended to be used as a means of specifying secret cryptographic keying material. For example, the input to a Key Derivation Function used to encrypt a document. Accordingly, the identifier UDF corresponding to an Encryption/Authentication type UDF is a UDF fingerprint of the Encryption/Authentication Type UDF in Base32 presentation with content type 'application/udf-encryption'. 4.4. Shamir Shared Secret The UDF format MAY be used to encode shares generated by a secret sharing mechanism. The only secret sharing mechanism currently supported is the Shamir Secret Sharing mechanism [Shamir79] . Each secret share represents a point represents a point on (x, f(x)), a polynomial in a modular field p. The secret being shared is an integer multiple of 32 bits represented by the polynomial value f(0). A Shamir Shared Secret Type UDF consists of the type identifier octet 144 followed by the Binary Data Sequence value describing the share value. The first octet of the Binary Data Sequence value specifies the threshold value and the x value of the particular share: o Bits 4-7 of the first byte specify the threshold value. o Bits 0-3 of the first byte specify the x value minus 1. The remaining octets specify the value f(x) in network byte (big- endian) order with leading padding if necessary so that the share has the same number of bytes as the secret. The algorithm requires that the value p be a prime larger than the integer representing the largest secret being shared. For compactness of representation we chose p to be the smallest prime that is greater than 2^n where n is an integer multiple of 32. This approach leaves a small probability that a set of chosen polynomial parameters cause one or more share values be larger than 2^n. Since it is the value of the secret rather than the polynomial parameters that is of important, such parameters MUST NOT be used. Hallam-Baker Expires February 16, 2020 [Page 18] Internet-Draft Mesh UDF August 2019 4.4.1. Secret Generation To share a secret of L bits with a threshold of n we use a f(x) a polynomial of degree n in the modular field p: f(x) = a_0 + a_1.x + a_2.x^2 + ... a_n.x^n where: L Is the length of the secret in bits, an integer multiple of 32. n Is the threshold, the number of shares required to reconstitute the secret. a0 Is the integer representation of the secret to be shared. a1 ... an Are randomly chosen integers less than p p Is the smallest prime that is greater than 2^L. For L=128, p = 2^128+51. The values of the key shares are the values f(1), f(2),... f(n). The most straightforward approach to generation of Shamir secrets is to generate the set of polynomial coefficients, a_0, a_1, ... a_n and use these to generate the share values f(1), f(2),... f(n). Note that if this approach is adopted, there is a small probability that one or more of the values f(1), f(2),... f(n) exceeds the range of values supported by the encoding. Should this occur, at least one of the polynomial coefficients MUST be replaced. An alternative means of generating the set of secrets is to select up to n-1 secret share values and use secret recovery to determine at least one additional share. If n shares are selected, the shared secret becomes an output of rather than an input to the process. 4.4.2. Recovery To recover the value of the shared secret, it is necessary to obtain sufficient shares to meet the threshold and recover the value f(0) = a_0. Applications MAY employ any approach that returns the correct result. The use of Lagrange basis polynomials is described in Appendix C. Hallam-Baker Expires February 16, 2020 [Page 19] Internet-Draft Mesh UDF August 2019 Alice decides to encrypt an important document and split the encryption key so that there are five key shares, three of which will be required to recover the key. Alice's master secret is 97 BE C3 8C EC 32 E3 A8 14 BE 38 AC 49 B3 58 D0 This has the UDF representation: ECL3-5Q4M-5QZO-HKAU-XY4K-YSNT-LDIA The master secret is converted to an integer applying network byte order conventions. Since the master secret is 128 bits, it is guaranteed to be smaller than the modulus. The resulting value becomes the polynomial value a0. Since a threshold of three shares is required, we will need a second order polynomial. The co-efficients of the polynomial a1, a2 are random numbers smaller than the modulus: a0 = 201703930001559361817193071124445092048 a1 = 150940799172659682039015718883035617571 a2 = 86155479518555634547489350117128484052 The master secret is the value f(0) = a0. The key shares are the values f(1), f(2)...f(5): f(1) = 98517841771836214940323532692840982164 f(2) = 167642712579224337158432694495493840384 f(3) = 68796175502785265008145949100635455201 f(4) = 142260597463457461952837903940034038122 f(5) = 47753611540302464529133951581921377640 The first byte of each share specifies the recovery information (quorum, x value), the remaining bytes specify the share value in network byte order: Hallam-Baker Expires February 16, 2020 [Page 20] Internet-Draft Mesh UDF August 2019 f(1) = 30 4A 1D D8 9D 72 E5 BC D3 C8 0C 4F A6 96 F3 26 94 f(2) = 31 7E 1E CF DF FB B5 F1 FB 6F 25 E1 68 DC 85 5E 00 f(3) = 32 33 C1 A9 54 86 A3 83 1F 0A 0A ED F3 1A 69 FE E1 f(4) = 33 6B 06 64 FB 13 AE 70 3E 98 BB 75 45 50 A1 09 6A f(5) = 34 23 ED 02 D3 A2 D6 B9 5A 1B 37 77 5F 7F 2A 7D 68 The UDF presentation of the key shares is thus: f(1) = SAYE-UHOY-TVZO-LPGT-ZAGE-7JUW-6MTJ-I f(2) = SAYX-4HWP-3753-L4P3-N4S6-C2G4-QVPA-A f(3) = SAZD-HQNJ-KSDK-HAY7-BIFO-34Y2-NH7O-C f(4) = SAZW-WBTE-7MJ2-44B6-TC5X-KRKQ-UEEW-U f(5) = SA2C-H3IC-2ORN-NOK2-DM3X-OX37-FJ6W-Q To recover the value f(0) from any three shares, we need to fit a polynomial curve to the three points and use it to calculate the value at x=0 using the Lagrange polynomial basis. 5. Variable Length UDFs Variable length UDFs are used to represent fingerprint values calculated over a content type identifier and the cryptographic digest of a content data item. The fingerprint value MAY be specified at any integer multiple of 20 bits that provides a work factor sufficient for the intended purpose. Two types of fingerprint are specified: Digest fingerprints Are computed with the same cryptographic digest algorithm used to calculate the digest of the content data. Message Authentication Code fingerprints Are computed using a Message Authentication Code. For a given algorithm (and key, if requires), if two UDF fingerprints are of the same content data and content type, either the fingerprint values will be the same or the initial characters of one will be exactly equal to the other. Hallam-Baker Expires February 16, 2020 [Page 21] Internet-Draft Mesh UDF August 2019 5.1. Content Digest A Content Digest Type UDF consists of the type identifier octet followed by the Binary Data Sequence value. The type identifier specifies the digest algorithm used and the compression level. Two digest algorithms are currently specified with four compression levels for each making a total of eight possible type identifiers. The Content Digest UDF for given content data is generated by the steps of: 1. Applying the digest algorithm to determine the Content Digest Value 2. Applying the digest algorithm to determine the Typed Content Digest Value 3. Determining the compression level from bytes 0-3 of the Typed Content Digest Value. 4. Determining the Type Identifier octet from the Digest algorithm identifier and compression level. 5. Truncating bytes 4-63 of the Typed Content Digest Value to determine the Binary Data Sequence value. 5.1.1. Content Digest Value The Content Digest Value (CDV) is determined by applying the digest algorithm to the content data: CDV = H()) Where H(x) is the cryptographic digest function is the binary data. 5.1.2. Typed Content Digest Value The Typed Content Digest Value (TCDV) is determined by applying the digest algorithm to the content type identifier and the CDV: TCDV = H ( + ?:? + CDV) Hallam-Baker Expires February 16, 2020 [Page 22] Internet-Draft Mesh UDF August 2019 Where A + B represents concatenation of the binary sequences A and B. is the IANA Content Type of the data in UTF8 encoding The two-step approach to calculating the Type Content Digest Value allows an application to attempt to match a set of content data against multiple types without the need to recalculate the value of the content data digest. 5.1.3. Compression The compression factor is determined according to the number of trailing zero bits in the first 8 bytes of the Typed Content Digest Value as follows: 19 or fewer leading zero bits Compression factor = 0 29 or fewer leading zero bits Compression factor = 20 39 or fewer leading zero bits Compression factor = 30 49 or fewer leading zero bits Compression factor = 40 50 or more leading zero bits Compression factor = 50 The least significant bits of each octet are regarded to be 'trailing'. Applications MUST use compression when creating and comparing UDFs. Applications MAY support content generation techniques that search for UDF values that use a compressed representation. Presentation of a content digest value indicating use of compression MAY be used as an indicator of 'proof of work'. 5.1.4. Presentation The type identifier is determined by the algorithm and compression factor as follows: Hallam-Baker Expires February 16, 2020 [Page 23] Internet-Draft Mesh UDF August 2019 +---------+---------+-----------+-------------+ | Type ID | Initial | Algorithm | Compression | +---------+---------+-----------+-------------+ | 80 | K | SHA-3-512 | 0 | | 81 | K | SHA-3-512 | 20 | | 82 | K | SHA-3-512 | 30 | | 83 | K | SHA-3-512 | 40 | | 84 | K | SHA-3-512 | 50 | | 96 | M | SHA-2-512 | 0 | | 97 | M | SHA-2-512 | 20 | | 98 | M | SHA-2-512 | 30 | | 99 | M | SHA-2-512 | 40 | | 100 | M | SHA-2-512 | 50 | +---------+---------+-----------+-------------+ Table 2 The Binary Data Sequence value is taken from the Typed Content Digest Value starting at the 9^th octet and as many additional bytes as are required to meet the presentation precision. 5.1.5. Example Encoding In the following examples, is the UTF8 encoding of the string "text/plain" and is the UTF8 encoding of the string "UDF Data Value" Data = 55 44 46 20 44 61 74 61 20 56 61 6C 75 65 ContentType = 74 65 78 74 2F 70 6C 61 69 6E 5.1.6. Using SHA-2-512 Digest Hallam-Baker Expires February 16, 2020 [Page 24] Internet-Draft Mesh UDF August 2019 H() = 48 DA 47 CC AB FE A4 5C 76 61 D3 21 BA 34 3E 58 10 87 2A 03 B4 02 9D AB 84 7C CE D2 22 B6 9C AB 02 38 D4 E9 1E 2F 6B 36 A0 9E ED 11 09 8A EA AC 99 D9 E0 BD EA 47 93 15 BD 7A E9 E1 2E AD C4 15 + ':' + H() = 74 65 78 74 2F 70 6C 61 69 6E 3A 48 DA 47 CC AB FE A4 5C 76 61 D3 21 BA 34 3E 58 10 87 2A 03 B4 02 9D AB 84 7C CE D2 22 B6 9C AB 02 38 D4 E9 1E 2F 6B 36 A0 9E ED 11 09 8A EA AC 99 D9 E0 BD EA 47 93 15 BD 7A E9 E1 2E AD C4 15 H( + ':' + H()) = C6 AF B7 C0 FE BE 04 E5 AE 94 E3 7B AA 5F 1A 40 5B A3 CE CC 97 4D 55 C0 9E 61 E4 B0 EF 9C AE F9 EB 83 BB 9D 5F 0F 39 F6 5F AA 06 DC 67 2A 67 71 4F FF 8F 83 C4 55 38 36 38 AE 42 7A 82 9C 85 BB The prefixed Binary Data Sequence is thus 60 C6 AF B7 C0 FE BE 04 E5 AE 94 E3 7B AA 5F 1A 40 5B The 125 bit fingerprint value is MDDK-7N6A-727A-JZNO-STRX-XKS7-DJAF This fingerprint MAY be specified with higher or lower precision as appropriate. 100 bit precision MDDK-7N6A-727A-JZNO-STRX 120 bit precision MDDK-7N6A-727A-JZNO-STRX-XKS7 200 bit precision MDDK-7N6A-727A-JZNO-STRX-XKS7-DJAF-XI6O-ZSLU-2VOA 260 bit precision MDDK-7N6A-727A-JZNO-STRX-XKS7-DJAF-XI6O-ZSLU-2VOA- TZQ6-JMHP-TSXP 5.1.7. Using SHA-3-512 Digest Hallam-Baker Expires February 16, 2020 [Page 25] Internet-Draft Mesh UDF August 2019 H() = 6D 2E CF E6 93 5A 0C FC F2 A9 1A 49 E0 0C D8 07 A1 4E 70 AB 72 94 6E CC BB 47 48 F1 8E 41 49 95 07 1D F3 6E 0D 0C 8B 60 39 C1 8E B4 0F 6E C8 08 65 B4 C4 45 9B A2 7E 97 74 7B BE 68 BC A8 C2 17 + ':' + H() = 74 65 78 74 2F 70 6C 61 69 6E 3A 6D 2E CF E6 93 5A 0C FC F2 A9 1A 49 E0 0C D8 07 A1 4E 70 AB 72 94 6E CC BB 47 48 F1 8E 41 49 95 07 1D F3 6E 0D 0C 8B 60 39 C1 8E B4 0F 6E C8 08 65 B4 C4 45 9B A2 7E 97 74 7B BE 68 BC A8 C2 17 H( + ':' + H()) = 8A 86 8A 06 1C 54 6E 7E 3F 75 5F 39 88 F9 FD 2F 8E C8 45 93 1B 80 A8 2F 29 16 7B A3 BE 21 1F 8A 75 61 88 A1 D5 7F 07 D5 9D 68 A4 2D 17 F4 4D 23 F9 E4 0B B2 1A 8D B9 F5 8D FC EC BD 01 F4 37 7C The prefixed Binary Data Sequence is thus 50 8A 86 8A 06 1C 54 6E 7E 3F 75 5F 39 88 F9 FD 2F 8E The 125 bit fingerprint value is KCFI-NCQG-DRKG-47R7-OVPT-TCHZ-7UXY 5.1.8. Using SHA-2-512 Digest with Compression The content data "UDF Compressed Document 4187123" produces a UDF Content Digest SHA-2-512 binary value with 20 trailing zeros and is therefore presented using compressed presentation: Data = " 55 44 46 20 43 6F 6D 70 72 65 73 73 65 64 20 44 6F 63 75 6D 65 6E 74 20 34 31 38 37 31 32 33" The UTF8 Content Digest is given as: Hallam-Baker Expires February 16, 2020 [Page 26] Internet-Draft Mesh UDF August 2019 H() = 36 21 FA 2A C5 D8 62 5C 2D 0B 45 FB 65 93 FC 69 C1 ED F7 00 AE 6F E3 3D 38 13 FE AB 76 AA 74 13 6D 5A 2B 20 DE D6 A5 CF 6C 04 E6 56 3F F3 C0 C7 C4 1D 3F 43 DD DC F1 A5 67 A7 E0 67 9A B0 C6 B7 + ':' + H() = 74 65 78 74 2F 70 6C 61 69 6E 3A 36 21 FA 2A C5 D8 62 5C 2D 0B 45 FB 65 93 FC 69 C1 ED F7 00 AE 6F E3 3D 38 13 FE AB 76 AA 74 13 6D 5A 2B 20 DE D6 A5 CF 6C 04 E6 56 3F F3 C0 C7 C4 1D 3F 43 DD DC F1 A5 67 A7 E0 67 9A B0 C6 B7 H( + ':' + H()) = 8E 14 D9 19 4E D6 02 12 C3 30 A7 BB 5F C7 17 6D AE 9A 56 7C A8 2A 23 1F 96 75 ED 53 10 EC E8 F2 60 14 24 D0 C8 BC 55 3D C0 70 F7 5E 86 38 1A 0B CB 55 9C B2 87 81 27 FF 3C EC E2 F0 90 A0 00 00 The prefixed Binary Data Sequence is thus 61 8E 14 D9 19 4E D6 02 12 C3 30 A7 BB 5F C7 17 6D AE The 125 bit fingerprint value is MGHB-JWIZ-J3LA-EEWD-GCT3-WX6H-C5W2 5.1.9. Using SHA-3-512 Digest with Compression The content data "UDF Compressed Document 774665" produces a UDF Content Digest SHA-3-512 binary value with 20 trailing zeros and is therefore presented using compressed presentation: Data = 55 44 46 20 43 6F 6D 70 72 65 73 73 65 64 20 44 6F 63 75 6D 65 6E 74 20 37 37 34 36 36 35 The UTF8 SHA-3-512 Content Digest is KEJI-Y225-BDUG-XX22-MXKE-5ITF- YVYM 5.2. Authenticator UDF An authenticator Type UDF consists of the type identifier octet followed by the Binary Data Sequence value. The type identifier specifies the digest and Message Authentication Code algorithm. Two algorithm suites are currently specified. Use of compression is not supported. Hallam-Baker Expires February 16, 2020 [Page 27] Internet-Draft Mesh UDF August 2019 The Authenticator UDF for given content data and key is generated by the steps of: 1. Applying the digest algorithm to determine the Content Digest Value 2. Applying the MAC algorithm to determine the Authentication value 3. Determining the Type Identifier octet from the Digest algorithm identifier and compression level. 4. Truncating the Authentication value to determine the Binary Data Sequence value. The key used to calculate and Authenticator type UDF is always a UNICODE string. If use of a binary value as a key is required, the value MUST be converted to a string format first. For example, by conversion to an Encryption/Authentication type UDF. 5.2.1. Content Digest Value The Content Digest Value (CDV) is determined in the exact same fashion as for a Content Digest UDF by applying the digest algorithm to the content data: CDV = H()) Where H(x) is the cryptographic digest function is the binary data. 5.2.2. Authentication Value The Authentication Value (AV) is determined by applying the digest algorithm to the content type identifier and the CDV: AV = MAC (, ( + ?:? + CDV)) Where is the authentication key as specified below MAC( , ) is the result of applying the Message Authentication Code algorithm to with Key and data The value is calculated as follows: Hallam-Baker Expires February 16, 2020 [Page 28] Internet-Draft Mesh UDF August 2019 IKM = UTF8 (Key) PRK = MAC (UTF8 ("KeyedUDFMaster"), IKM) OKM = HKDF-Expand(PRK, UTF8 ("KeyedUDFExpand"), HashLen) Where the function UTF8(string) converts a string to the binary UTF8 representation, HKDF-Expand is as defined in [RFC5869] and the function MAC(k,m) is the HMAC function formed from the specified hash H(m) as specified in [RFC2014] . Keyed UDFs are typically used in circumstances where user interaction requires a cryptographic commitment type functionality In the following example, is the UTF8 encoding of the string "text/plain" and is the UTF8 encoding of the string "Konrad is the traitor". The randomly chosen key is NDD7-6CMX-H2FW- ISAL-K4VB-DQ3E-PEDM. Data = 4B 6F 6E 72 61 64 20 69 73 20 74 68 65 20 74 72 61 69 74 6F 72 ContentType = 74 65 78 74 2F 70 6C 61 69 6E Key = 4E 44 44 37 2D 36 43 4D 58 2D 48 32 46 57 2D 49 53 41 4C 2D 4B 34 56 42 2D 44 51 33 45 2D 50 45 44 4D Processing is performed in the same manner as an unkeyed fingerprint except that compression is never used: Hallam-Baker Expires February 16, 2020 [Page 29] Internet-Draft Mesh UDF August 2019 H() = 93 FC DA F9 FA FD 1E 26 50 26 C3 C1 28 43 40 73 D8 BC 3D 62 87 73 2B 73 B8 EC 93 B6 DE 80 FF DA 70 0A D1 CE E8 F4 36 68 EF 4E 71 63 41 53 91 5C CE 8C 5C CE C7 9A 46 94 6A 35 79 F9 33 70 85 01 + ':' + H() = 74 65 78 74 2F 70 6C 61 69 6E 3A 93 FC DA F9 FA FD 1E 26 50 26 C3 C1 28 43 40 73 D8 BC 3D 62 87 73 2B 73 B8 EC 93 B6 DE 80 FF DA 70 0A D1 CE E8 F4 36 68 EF 4E 71 63 41 53 91 5C CE 8C 5C CE C7 9A 46 94 6A 35 79 F9 33 70 85 01 PRK(Key) = 77 D3 0A 08 39 BD 9D C0 97 44 DA 33 15 0A 42 5E CD 17 80 03 B3 CF CC 89 7A C7 84 12 B4 51 5B 25 DC 26 F5 E1 1B 20 F3 89 2E 9A 1A 7B 0E 73 23 39 0E C3 4C EF 2D 40 DA 05 B4 70 C6 1C 82 C1 49 33 HKDF(Key) = BF A9 B4 58 9C 1D 68 D7 9A B7 11 F6 C8 98 59 14 20 D7 82 67 C5 84 22 E5 A0 F9 93 52 B1 C3 87 EB 05 06 CB C4 E4 D6 E6 EE 1F F0 D4 7A 97 68 5E CE 28 1C CA AF D8 B5 D1 24 4A 71 EC E3 AC B5 D2 04 MAC(, + ':' + H()) = 4C C3 7F D3 F9 9E 52 CF 07 90 74 53 84 65 95 BC 1A 2B A5 D1 68 9D 05 6D 06 C5 CA BF 17 CB E0 49 95 39 57 08 79 C4 E5 49 D3 3A 59 A3 32 05 45 A6 30 26 25 AE 8A F4 47 C6 1F B5 33 7F AD 69 A6 30 The prefixed Binary Data Sequence is thus 00 4C C3 7F D3 F9 9E 52 CF 07 90 74 53 84 65 95 BC 1A The 125 bit fingerprint value is ABGM-G76T-7GPF-FTYH-SB2F-HBDF-SW6B 5.3. Content Type Values While a UDF fingerprint MAY be used to identify any form of static data, the use of a UDF fingerprint to identify a public key signature key provides a level of indirection and thus the ability to identify dynamic data. The content types used to identify public keys are thus of particular interest. As described in the security considerations section, the use of fingerprints to identify a bare public key and the use of Hallam-Baker Expires February 16, 2020 [Page 30] Internet-Draft Mesh UDF August 2019 fingerprints to identify a public key and associated security policy information are very different. 5.3.1. PKIX Certificates and Keys UDF fingerprints MAY be used to identify PKIX certificates, CRLs and public keys in the ASN.1 encoding used in PKIX certificates. Since PKIX certificates and CLRs contain security policy information, UDF fingerprints used to identify certificates or CRLs SHOULD be presented with a minimum of 200 bits of precision. PKIX applications MUST not accept UDF fingerprints specified with less than 200 bits of precision for purposes of identifying trust anchors. PKIX certificates, keys and related content data are identified by the following content types: application/pkix-cert A PKIX Certificate application/pkix-crl A PKIX CRL application/pkix-keyinfo The SubjectPublicKeyInfo structure defined in the PKIX certificate specification encoded using DER encoding rules. The SubjectPublicKeyInfo structure is defined in [RFC5280] as follows: SubjectPublicKeyInfo ::= SEQUENCE { algorithm AlgorithmIdentifier, subjectPublicKey BIT STRING } This schema results in an identical DER encoding to the OIDInfo sequence specified in section XXX. The distinction between these productions is that the OIDInfo schema is intended to be used to encode arbitrary data while the application/pkix-keyinfo content type is only intended to be used to describe public keys. 5.3.2. OpenPGP Key OpenPGPv5 keys and key set content data are identified by the following content type: application/pgp-keys An OpenPGP key set. Hallam-Baker Expires February 16, 2020 [Page 31] Internet-Draft Mesh UDF August 2019 5.3.3. DNSSEC DNSSEC record data consists of DNS records which are identified by the following content type: application/dns A DNS resource record in binary format 6. UDF URIs The UDF URI scheme describes a means of constructing URIs from a UDF value. Two forms or UDF URI are specified, Name and Locator. In both cases the URI MUST specify the scheme type "UDF", and a UDF fingerprint and MAY specify a query identifier and/or a fragment identifier. By definition a Locator form URI contains an authority field which MUST be a DNS domain name. The use of IP address forms for this purpose is not permitted. Name Form URIs allow static content data to be identified without specifying the means by which the content data may be retrieved. Locator form URIs allow static content data or dynamic network resources to be identified and the means of retrieval. The syntax of a UDF URI is a subset of the generic URI syntax specified in [RFC3986] . The use of userinfo and port numbers is not supported and the path part of the uri is a UDF in base32 presentation. URI = "UDF:" udf [ "?" query ] [ "" fragment ] udf = name-form / locator-form name-form = udf-value locator-form = "//" authority "/" udf-value authority = host host = reg-name 6.1. Name form Name form UDF URIs provide a means of presenting a UDF value in a context in which a URI form of a name is required without providing a means of resolution. Hallam-Baker Expires February 16, 2020 [Page 32] Internet-Draft Mesh UDF August 2019 Adding the UDF scheme prefix to a UDF fingerprint does not change the semantics of the fingerprint itself. The semantics of the name result from the context in which it is used. For example, a UDF value of any type MAY be used to give a unique targetNamespace value in an XML Schema [XMLSchema] 6.2. Locator form The locator form of an unkeyed UDF URI is resolved by the following steps: o Use DNS Web service discovery to determine the Web Service Endpoint. o Determine the content identifier from the source URI. o Append the content identifier to the Web Service Endpoint as a suffix to form the target URI. o Retrieve content from the Web Service Endpoint by means of a GET method. o Perform post processing as specified by the UDF type. 6.2.1. DNS Web service discovery DNS Web Discovery is performed as specified in [draft-hallambaker-web-service-discovery] for the service mmm-udf and domain name specified in the URI. For a full description of the discovery mechanism, consult the referenced specification. The use of DNS Web Discovery permits service providers to make full use of the load balancing and service description capabilities afforded by use of DNS SRV and TXT records in accordance with the approach described in [RFC6763] . If no SRV or TXT records are specified, DNS Web Discovery specifies that the Web Service Endpoint be the Well Known Service [RFC5785] with the prefix /.well-known/srv/mmm-udf. 6.2.2. Content Identifier For all UDF types other than Secret Share, the Content Identifier value is the UDF SHA-2-512 Content Digest of the canonical form of the UDF specified in the source URI presented at twice the precision to a maximum of 440 bits. Hallam-Baker Expires February 16, 2020 [Page 33] Internet-Draft Mesh UDF August 2019 If the UDF is of type Secret Share, the shared secret MUST be recovered before the content identifier can be resolved. The shared secret is then expressed as a UDF of type Encryption/Authentication and the Content Identifier determined as for an Encryption/ Authentication type UDF. 6.2.3. Target URI The target URI is formed by appending a slash separator '/' and the Content Identifier value to the Web Service Endpoint. Since the path portion of a URI is case sensitive, the UDF value MUST be specified in upper case and MUST include separator marks. 6.2.4. Postprocessing After retrieving the content data, the resolver MUST perform post processing as indicated by the content type: Nonce No additional post processing is required. Content Digest The resolver MUST verify that the content returned matches the UDF fingerprint value. Authenticator The resolver MUST verify that the content returned matches the UDF fingerprint value. Encryption/Authentication The content data returned is decrypted and authenticated using the key specified in the UDF value as the initial keying material (see below). Secret Share (set) The content data returned is decrypted and authenticated using the shared secret as the initial keying material (see below). 6.2.5. Decryption and Authentication The steps performed to decode cryptographically enhanced content data depends on the content type specified in the returned content. Two formats are currently supported: o DARE Envelope format as specified in [draft-hallambaker-mesh-dare] o Cryptographic Message Syntax (CMS) Symmetric Key Package as specified in [RFC6031] Hallam-Baker Expires February 16, 2020 [Page 34] Internet-Draft Mesh UDF August 2019 6.2.6. QR Presentation Encoding of a UDF URI as a QR code requires only the characters in alphanumeric encoding, thus achieving compactness with minimal overhead. 7. Strong Internet Names A Strong Internet Name is an Internet address that is bound to a policy governing interpretation of that address by means of a Content Digest type UDF of the policy expressed as a UDF prefixed DNS label within the address itself. The Reserved LDH labels as defined in [RFC5890] that begin with the prefix mm-- are reserved for use as Strong Internet Names. The characters following the prefix are a Content Digest type UDF in Base32 presentation. Since DNS labels are limited to 63 characters, the presentation of the SIN itself is limited to 59 characters and thus 240 bits of precision. 8. Security Considerations This section describes security considerations arising from the use of UDF in general applications. Additional security considerations for use of UDFs in Mesh services and applications are described in the Mesh Security Considerations guide [draft-hallambaker-mesh-security] . 8.1. Confidentiality Encrypted locator is a bearer token 8.2. Availability Corruption of a part of a shared secret may prevent recovery 8.3. Integrity Shared secret parts do not contain context information to specify which secret they relate to. Hallam-Baker Expires February 16, 2020 [Page 35] Internet-Draft Mesh UDF August 2019 8.4. Work Factor and Precision A given UDF data object has a single fingerprint value that may be presented at different precisions. The shortest legitimate precision with which a UDF fingerprint may be presented has 96 significant bits A UDF fingerprint presents the same work factor as any other cryptographic digest function. The difficulty of finding a second data item that matches a given fingerprint is 2^n and the difficulty or finding two data items that have the same fingerprint is 2^(n/2). Where n is the precision of the fingerprint. For the algorithms specified in this document, n = 512 and thus the work factor for finding collisions is 2^256, a value that is generally considered to be computationally infeasible. Since the use of 512 bit fingerprints is impractical in the type of applications where fingerprints are generally used, truncation is a practical necessity. The longer a fingerprint is, the less likely it is that a user will check every character. It is therefore important to consider carefully whether the security of an application depends on second pre-image resistance or collision resistance. In most fingerprint applications, such as the use of fingerprints to identify public keys, the fact that a malicious party might generate two keys that have the same fingerprint value is a minor concern. Combined with a flawed protocol architecture, such a vulnerability may permit an attacker to construct a document such that the signature will be accepted as valid by some parties but not by others. For example, Alice generates keypairs until two are generated that have the same 100 bit UDF presentation (typically 2^48 attempts). She registers one keypair with a merchant and the other with her bank. This allows Alice to create a payment instrument that will be accepted as valid by one and rejected by the other. The ability to generate of two PKIX certificates with the same fingerprint and different certificate attributes raises very different and more serious security concerns. For example, an attacker might generate two certificates with the same key and different use constraints. This might allow an attacker to present a highly constrained certificate that does not present a security risk to an application for purposes of gaining approval and an unconstrained certificate to request a malicious action. In general, any use of fingerprints to identify data that has security policy semantics requires the risk of collision attacks to Hallam-Baker Expires February 16, 2020 [Page 36] Internet-Draft Mesh UDF August 2019 be considered. For this reason, the use of short, 'user friendly' fingerprint presentations (Less than 200 bits) SHOULD only be used for public key values. 8.5. Semantic Substitution Many applications record the fact that a data item is trusted, rather fewer record the circumstances in which the data item is trusted. This results in a semantic substitution vulnerability which an attacker may exploit by presenting the trusted data item in the wrong context. The UDF format provides protection against high level semantic substitution attacks by incorporating the content type into the input to the outermost fingerprint digest function. The work factor for generating a UDF fingerprint that is valid in both contexts is thus the same as the work factor for finding a second preimage in the digest function (2^512 for the specified digest algorithms). It is thus infeasible to generate a data item such that some applications will interpret it as a PKIX key and others will accept as an OpenPGP key. While attempting to parse a PKIX key as an OpenPGP key is virtually certain to fail to return the correct key parameters it cannot be assumed that the attempt is guaranteed to fail with an error message. The UDF format does not provide protection against semantic substitution attacks that do not affect the content type. 8.6. QR Code Scanning The act of scanning a QR code SHOULD be considered equivalent to clicking on an unlabeled hypertext link. Since QR codes are scanned in many different contexts, the mere act of scanning a QR code MUST NOT be interpreted as constituting an affirmative acceptance of terms or conditions or as creating an electronic signature. If such semantics are required in the context of an application, these MUST be established by secondary user actions made subsequent to the scanning of the QR code. There is a risk that use of QR codes to automate processes such as payment will lead to abusive practices such as presentation of fraudulent invoices for goods not ordered or delivered. It is therefore important to ensure that such requests are subject to adequate accountability controls. Hallam-Baker Expires February 16, 2020 [Page 37] Internet-Draft Mesh UDF August 2019 9. IANA Considerations Registrations are requested in the following registries: o Service Name and Transport Protocol Port Number o well-known URI registry o Uniform Resource Identifier (URI) Schemes o Media Types In addition, the creation of the following registry is requested: Uniform Data Fingerprint Type Identifier Registry. 9.1. Protocol Service Name The following registration is requested in the Service Name and Transport Protocol Port Number Registry in accordance with [RFC6355] Service Name (REQUIRED) mmm-udf Transport Protocol(s) (REQUIRED) TCP Assignee (REQUIRED) Phillip Hallam-Baker, phill@hallambaker.com Contact (REQUIRED) Phillip Hallam-Baker, phill@hallambaker.com Description (REQUIRED) mmm-udf is a Web Service protocol that resolves Mathematical Mesh Uniform Data Fingerprints (UDF) to resources. The mmm-udf service name is used in service discovery to identify a Web Service endpoint to perform resolution of a UDF presented in URI locator form. Reference (REQUIRED) [This document] Port Number (OPTIONAL) None Service Code (REQUIRED for DCCP only) None Known Unauthorized Uses (OPTIONAL) None Assignment Notes (OPTIONAL) None Hallam-Baker Expires February 16, 2020 [Page 38] Internet-Draft Mesh UDF August 2019 9.2. Well Known The following registration is requested in the well-known URI registry in accordance with [RFC5785] URI suffix srv/mmm-udf Change controller Phillip Hallam-Baker, phill@hallambaker.com Specification document(s): [This document] Related information [draft-hallambaker-web-service-discovery] 9.3. URI Registration The following registration is requested in the Uniform Resource Identifier (URI) Schemes registry in accordance with [RFC7595] Scheme name: UDF Status: Provisional Applications/protocols that use this scheme name: Mathematical Mesh Service protocols (mmm) Contact: Phillip Hallam-Baker mailto:phill@hallambaker.com Change controller: Phillip Hallam-Baker References: [This document] 9.4. Media Types Registrations 9.4.1. Media Type: application/pkix-keyinfo Type name: application Subtype name: pkix-keyinfo Required parameters: None Optional parameters: None Encoding considerations: Binary Security considerations: Described in [This] Hallam-Baker Expires February 16, 2020 [Page 39] Internet-Draft Mesh UDF August 2019 Interoperability considerations: None Published specification: [This] Applications that use this media type: Uniform Data Fingerprint Fragment identifier considerations: None Additional information: Deprecated alias names for this type: None Magic number(s): None File extension(s): None Macintosh file type code(s): None Person & email address to contact for further information: Phillip Hallam-Baker @hallambaker.com> Intended usage: Content type identifier to be used in constructing UDF Content Digests and Authenticators and related cryptographic purposes. Restrictions on usage: None Author: Phillip Hallam-Baker Change controller: Phillip Hallam-Baker Provisional registration? (standards tree only): Yes 9.4.2. Media Type: application/udf-encryption Type name: application Subtype name: udf-encryption Required parameters: None Optional parameters: None Encoding considerations: None Security considerations: Described in [This] Interoperability considerations: None Published specification: [This] Hallam-Baker Expires February 16, 2020 [Page 40] Internet-Draft Mesh UDF August 2019 Applications that use this media type: Uniform Data Fingerprint Fragment identifier considerations: None Additional information: Deprecated alias names for this type: None Magic number(s): None File extension(s): None Macintosh file type code(s): None Person & email address to contact for further information: Phillip Hallam-Baker @hallambaker.com> Intended usage: Content type identifier to be used in constructing UDF Content Digests and Authenticators and related cryptographic purposes. Restrictions on usage: None Author: Phillip Hallam-Baker Change controller: Phillip Hallam-Baker Provisional registration? (standards tree only): Yes 9.4.3. Media Type: application/udf-secret Type name: application Subtype name: udf- secret Required parameters: None Optional parameters: None Encoding considerations: None Security considerations: Described in [This] Interoperability considerations: None Published specification: [This] Applications that use this media type: Uniform Data Fingerprint Fragment identifier considerations: None Hallam-Baker Expires February 16, 2020 [Page 41] Internet-Draft Mesh UDF August 2019 Additional information: Deprecated alias names for this type: None Magic number(s): None File extension(s): None Macintosh file type code(s): None Person & email address to contact for further information: Phillip Hallam-Baker @hallambaker.com> Intended usage: Content type identifier to be used in constructing UDF Content Digests and Authenticators and related cryptographic purposes. Restrictions on usage: None Author: Phillip Hallam-Baker Change controller: Phillip Hallam-Baker Provisional registration? (standards tree only): Yes 9.5. Uniform Data Fingerprint Type Identifier Registry This document describes a new extensible data format employing fixed length version identifiers for UDF types. 9.5.1. The name of the registry Uniform Data Fingerprint Type Identifier Registry 9.5.2. Required information for registrations Registrants must specify the Type identifier code(s) requested, description and RFC number for the corresponding standards action document. The standards document must specify the means of generating and interpreting the UDF Data Sequence Value and the purpose(s) for which it is proposed. Since the initial letter of the Base32 presentation provides a mnemonic function in UDFs, the standards document must explain why the proposed Type Identifier and associated initial letter are appropriate. In cases where a new initial letter is to be created, there must be an explanation of why this is appropriate. If an Hallam-Baker Expires February 16, 2020 [Page 42] Internet-Draft Mesh UDF August 2019 existing initial letter is to be created, there must be an explanation of why this is appropriate and/or acceptable. 9.5.3. Applicable registration policy Due to the intended field of use (human data entry), the code space is severely constrained. Accordingly, it is intended that code point registrations be as infrequent as possible. Registration of new digest algorithms is strongly discouraged and should not occur unless, (1) there is a known security vulnerability in one of the two schemes specified in the original assignment and (2) the proposed algorithm has been subjected to rigorous peer review, preferably in the form of an open, international competition and (3) the proposed algorithm has been adopted as a preferred algorithm for use in IETF protocols. Accordingly, the applicable registration policy is Standards Action. 9.5.4. Size, format, and syntax of registry entries Each registry entry consists of a single byte code, 9.5.5. Initial assignments and reservations The following entries should be added to the registry as initial assignments: Code Description Reference --- ------------------- --------- 00 HMAC and SHA-2-512 [This document] 32 HKDF-AES-512 [This document] 80 SHA-3-512 [This document] 81 SHA-3-512 with 20 trailing zeros [This document] 82 SHA-3-512 with 30 trailing zeros [This document] 82 SHA-3-512 with 40 trailing zeros [This document] 83 SHA-3-512 with 50 trailing zeros [This document] 96 SHA-2-512 [This document] 97 SHA-2-512 with 20 trailing zeros [This document] 98 SHA-2-512 with 30 trailing zeros [This document] 99 SHA-2-512 with 40 trailing zeros [This document] 100 SHA-2-512 with 50 trailing zeros [This document] 104 Random nonce [This document] 144 Shamir Secret Share [This document] Hallam-Baker Expires February 16, 2020 [Page 43] Internet-Draft Mesh UDF August 2019 10. Acknowledgements A list of people who have contributed to the design of the Mesh is presented in [draft-hallambaker-mesh-architecture] . Thanks are due to Viktor Dukhovni, Damian Weber and an anonymous member of the cryptography@metzdowd.com list for assisting in the compilation of the table of prime values. 11. Appendix A: Prime Values for Secret Sharing The following are the prime values to be used for sharing secrets of up to 512 bits. If it is necessary to share larger secrets, the corresponding prime may be found by choosing a value (2^32)^n that is larger than the secret to be encoded and determining the next largest number that is prime. +----------------+----------------------+ | Number of bits | Offset = Primen - 2n | +----------------+----------------------+ | 32 | 15 | | 64 | 13 | | 96 | 61 | | 128 | 51 | | 160 | 7 | | 192 | 133 | | 224 | 735 | | 256 | 297 | | 288 | 127 | | 320 | 27 | | 352 | 55 | | 384 | 231 | | 416 | 235 | | 448 | 211 | | 480 | 165 | | 512 | 75 | +----------------+----------------------+ Table 3 For example, the prime to be used to share a 128 bit value is 2^128 + 51. Hallam-Baker Expires February 16, 2020 [Page 44] Internet-Draft Mesh UDF August 2019 12. Recovering Shamir Shared Secret The value of a Shamir Shared secret may be recovered using Lagrange basis polynomials. To share a secret with a threshold of n shares and L bits we constructed f(x) a polynomial of degree n in the modular field p where p is the smallest prime greater than 2^L: f(x) = a_0 + a_1.x + a_2.x^2 + ... a_n.x^n The shared secret is the binary representation of the value a_0 Given n shares (x_0, y_0), (x_1, y_1), ... (x_n-1, y_n-1), The corresponding the Lagrange basis polynomials l_0, l_1, .. l_n-1 are given by: lm = ((x - x(m_0)) / (x(m) - x(m_0))) . ((x - x(m_1)) / (x(m) - x(m_1))) . ... . ((x - x(m_n-2)) / (x(m) - x(m_n-2))) Where the values m_0, m_1, ... m_n-2, are the integers 0, 1, .. n-1, excluding the value m. These can be used to compute f(x) as follows: f(x) = y_0l_0 + y_1l_1 + ... y_n-1l_n-1 Since it is only the value of f(0) that we are interested in, we compute the Lagrange basis for the value x = 0: lz_m = ((x(m_1)) / (x(m) - x(m_1))) . ((x(m_2)) / (x(m) - x(m_2))) Hence, a_0 = f(0) = y_0lz_0 + y_1lz_1 + ... y_n-1l_n-1 The following C# code recovers the values. using System; using System.Collections.Generic; using System.Numerics; namespace Examples { class Examples { /// /// Combine a set of points (x, f(x)) Hallam-Baker Expires February 16, 2020 [Page 45] Internet-Draft Mesh UDF August 2019 /// on a polynomial of degree in a /// discrete field modulo prime to /// recover the value f(0) using Lagrange basis polynomials. /// /// The values f(x). /// The values for x. /// The modulus. /// The polynomial degree. /// The value f(0). static BigInteger CombineNK( BigInteger[] fx, int[] x, BigInteger p, int n) { if (fx.Length < n) { throw new Exception("Insufficient shares"); } BigInteger accumulator = 0; for (var formula = 0; formula < n; formula++) { var value = fx[formula]; BigInteger numerator = 1, denominator = 1; for (var count = 0; count < n; count++) { if (formula == count) { continue; // If not the same value } var start = x[formula]; var next = x[count]; numerator = (numerator * -next) % p; denominator = (denominator * (start - next)) % p; } var InvDenominator = ModInverse(denominator, p); accumulator = Modulus((accumulator + (fx[formula] * numerator * InvDenominator)), p); } return accumulator; } /// /// Compute the modular multiplicative inverse of the value /// modulo /// Hallam-Baker Expires February 16, 2020 [Page 46] Internet-Draft Mesh UDF August 2019 /// The value to find the inverse of /// The modulus. /// static BigInteger ModInverse( BigInteger k, BigInteger p) { var m2 = p - 2; if (k < 0) { k = k + p; } return BigInteger.ModPow(k, m2, p); } /// /// Calculate the modulus of a number with correct handling /// for negative numbers. /// /// Value /// The modulus. /// x mod p public static BigInteger Modulus( BigInteger x, BigInteger p) { var Result = x % p; return Result.Sign >= 0 ? Result : Result + p; } } } 13. References 13.1. Normative References [draft-hallambaker-mesh-architecture] Hallam-Baker, P., "Mathematical Mesh 3.0 Part I: Architecture Guide", draft-hallambaker-mesh- architecture-10 (work in progress), August 2019. [draft-hallambaker-mesh-dare] Hallam-Baker, P., "Mathematical Mesh 3.0 Part III : Data At Rest Encryption (DARE)", draft-hallambaker-mesh-dare-04 (work in progress), August 2019. [draft-hallambaker-mesh-security] Hallam-Baker, P., "Mathematical Mesh Part VII: Security Considerations", draft-hallambaker-mesh-security-01 (work in progress), July 2019. Hallam-Baker Expires February 16, 2020 [Page 47] Internet-Draft Mesh UDF August 2019 [draft-hallambaker-web-service-discovery] Hallam-Baker, P., "DNS Web Service Discovery", draft- hallambaker-web-service-discovery-02 (work in progress), April 2019. [RFC2014] Weinrib, A. and J. Postel, "IRTF Research Group Guidelines and Procedures", BCP 8, RFC 2014, DOI 10.17487/RFC2014, October 1996. [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997. [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform Resource Identifier (URI): Generic Syntax", STD 66, RFC 3986, DOI 10.17487/RFC3986, January 2005. [RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006. [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R., and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008. [RFC5869] Krawczyk, H. and P. Eronen, "HMAC-based Extract-and-Expand Key Derivation Function (HKDF)", RFC 5869, DOI 10.17487/RFC5869, May 2010. [RFC6031] Turner, S. and R. Housley, "Cryptographic Message Syntax (CMS) Symmetric Key Package Content Type", RFC 6031, DOI 10.17487/RFC6031, December 2010. [SHA-2] NIST, "Secure Hash Standard", August 2015. [SHA-3] Dworkin, M., "SHA-3 Standard: Permutation-Based Hash and Extendable-Output Functions", August 2015. 13.2. Informative References [draft-hallambaker-mesh-developer] Hallam-Baker, P., "Mathematical Mesh: Reference Implementation", draft-hallambaker-mesh-developer-08 (work in progress), April 2019. Hallam-Baker Expires February 16, 2020 [Page 48] Internet-Draft Mesh UDF August 2019 [draft-hallambaker-mesh-trust] Hallam-Baker, P., "Mathematical Mesh Part VI: The Trust Mesh", draft-hallambaker-mesh-trust-02 (work in progress), July 2019. [RFC4086] Eastlake 3rd, D., Schiller, J., and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, DOI 10.17487/RFC4086, June 2005. [RFC4880] Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and R. Thayer, "OpenPGP Message Format", RFC 4880, DOI 10.17487/RFC4880, November 2007. [RFC5785] Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known Uniform Resource Identifiers (URIs)", RFC 5785, DOI 10.17487/RFC5785, April 2010. [RFC5890] Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", RFC 5890, DOI 10.17487/RFC5890, August 2010. [RFC6355] Narten, T. and J. Johnson, "Definition of the UUID-Based DHCPv6 Unique Identifier (DUID-UUID)", RFC 6355, DOI 10.17487/RFC6355, August 2011. [RFC6763] Cheshire, S. and M. Krochmal, "DNS-Based Service Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013. [RFC7595] Thaler, D., Hansen, T., and T. Hardie, "Guidelines and Registration Procedures for URI Schemes", BCP 35, RFC 7595, DOI 10.17487/RFC7595, June 2015. [Shamir79] "[Reference Not Found!]". [XMLSchema] Gao, S., Sperberg-McQueen, C., Thompson, H., Mendelsohn, N., Beech, D., and M. Maloney, "W3C XML Schema Definition Language (XSD) 1.1 Part 1: Structures", April 2012. 13.3. URIs [1] http://mathmesh.com/Documents/draft-hallambaker-mesh-udf.html [2] http://mathmesh.com/Documents/draft-hallambaker-mesh-udf.html Hallam-Baker Expires February 16, 2020 [Page 49] Internet-Draft Mesh UDF August 2019 Author's Address Phillip Hallam-Baker Email: phill@hallambaker.com Hallam-Baker Expires February 16, 2020 [Page 50]