Network Working Group P. Hallam-Baker
Internet-Draft Comodo Group Inc.
Intended status: Informational March 8, 2016
Expires: September 9, 2016

Title
draft-hallambaker-jsonbcd-04

Abstract

Binary Encodings for JavaScript Object Notation: JSON-B, JSON-C, JSON-D

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on September 9, 2016.

Copyright Notice

Copyright (c) 2016 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

1. Abstract

Three binary encodings for JavaScript Object Notation (JSON) are presented. JSON-B (Binary) is a strict superset of the JSON encoding that permits efficient binary encoding of intrinsic JavaScript data types. JSON-C (Compact) is a strict superset of JSON-B that supports compact representation of repeated data strings with short numeric codes. JSON-D (Data) supports additional binary data types for integer and floating point representations for use in scientific applications where conversion between binary and decimal representations would cause a loss of precision.

2. Definitions

2.1. Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

3. Introduction

JavaScript Object Notation (JSON) is a simple text encoding for the JavaScript Data model that has found wide application beyond its original field of use. In particular JSON has rapidly become a preferred encoding for Web Services.

JSON encoding supports just four fundamental data types (integer, floating point, string and boolean), arrays and objects which consist of a list of tag-value pairs.

Although the JSON encoding is sufficient for many purposes it is not always efficient. In particular there is no efficient representation for blocks of binary data. Use of base64 encoding increases data volume by 33%. This overhead increases exponentially in applications where nested binary encodings are required making use of JSON encoding unsatisfactory in cryptographic applications where nested binary structures are frequently required.

Another source of inefficiency in JSON encoding is the repeated occurrence of object tags. A JSON encoding containing an array of a hundred objects such as {"first":1,"second":2} will contain a hundred occurrences of the string "first" (seven bytes) and a hundred occurrences of the string "second" (eight bytes). Using two byte code sequences in place of strings allows a saving of 11 bytes per object without loss of information, a saving of 50%.

A third objection to the use of JSON encoding is that floating point numbers can only be represented in decimal form and this necessarily involves a loss of precision when converting between binary and decimal representations. While such issues are rarely important in network applications they can be critical in scientific applications. It is not acceptable for saving and restoring a data set to change the result of a calculation.

3.1. Objectives

The following were identified as core objectives for a binary JSON encoding:

Three binary encodings are defined:

JSON-B (Binary)

Simply encodes JSON data in binary. Only the JavaScript data model is supported (i.e. atomic types are integers, double or string). Integers may be 8, 16, 32 or 64 bits either signed or unsigned. Floating points are IEEE 754 binary64 format [IEEE-754]. Supports chunked encoding for binary and UTF-8 string types.

JSON-C (Compact)

As JSON-B but with support for representing JSON tags in numeric code form (16 bit code space). This is done for both compact encoding and to allow simplification of encoders/decoders in constrained environments. Codes may be defined inline or by reference to a known dictionary of codes referenced via a digest value.

JSON-D (Data)

As JSON-C but with support for representing additional data types without loss of precision. In particular other IEEE 754 floating point formats, both binary and decimal and Intel's 80 bit floating point, plus 128 bit integers and bignum integers.

4. Extended JSON Grammar

The JSON-B, JSON-C and JSON-D encodings are all based on the JSON grammar [RFC4627] using the same syntactic structure but different lexical encodings.

JSON-B0 and JSON-C0 replace the JSON lexical encodings for strings and numbers with binary encodings. JSON-B1 and JSON-C1 allow either lexical encoding to be used. Thus any valid JSON encoding is a valid JSON-B1 or JSON-C1 encoding.

The grammar of JSON-B, JSON-C and JSON-D is a superset of the JSON grammar. The following productions are added to the grammar:

x-value

Binary encodings for data values. As the binary value encodings are all self delimiting

x-member

An object member where the value is specified as an X-value and thus does not require a value-separator.

b-value

Binary data encodings defined in JSON-B.

b-string

Defined length string encoding defined in JSON-B.

c-def

Tag code definition defined in JSON-C. These may only appear before the beginning of an Object or Array and before any preceeding white space.

c-tag

Tag code value defined in JSON-C.

d-value

Additional binary data encodings defined in JSON-D for use in scientific data applications.

The JSON grammar is modified to permit the use of x-value productions in place of ( value value-separator ) :

JSON-text = (object / array)
   
object = *cdef begin-object [
         *( member value-separator | x-member )
         (member | x-member) ] end-object
   
member = tag value
x-member = tag x-value
   
tag = string name-separator | b-string | c-tag
 
array = *cdef begin-array [  *( value value-separator | x-value )
(value | x-value) ] end-array
   
x-value = b-value / d-value
   
value = false / null / true / object / array / number / string
   
name-separator  = ws %x3A ws  ; : colon
value-separator = ws %x2C ws  ; , comma

The following lexical values are unchanged:
begin-array     = ws %x5B ws  ; [ left square bracket
begin-object    = ws %x7B ws  ; { left curly bracket
end-array       = ws %x5D ws  ; ] right square bracket
end-object      = ws %x7D ws  ; } right curly bracket
   
ws = *( %x20 %x09 %x0A  %x0D )
   
false = %x66.61.6c.73.65   ; false
null  = %x6e.75.6c.6c      ; null
true  = %x74.72.75.65      ; true

The productions number and string are defined as before:

number = [ minus ] int [ frac ] [ exp ]
decimal-point = %x2E       ; .
digit1-9 = %x31-39         ; 1-9
e = %x65 / %x45            ; e E
exp = e [ minus / plus ] 1*DIGIT
frac = decimal-point 1*DIGIT
int = zero / ( digit1-9 *DIGIT )
minus = %x2D               ; -
plus = %x2B                ; +
zero = %x30                ; 0
   
string = quotation-mark *char quotation-mark
char = unescaped /
escape ( %x22 / %x5C / %x2F / %x62 / %x66 /
%x6E / %x72 / %x74 /  %x75 4HEXDIG )
   
escape = %x5C              ; \
quotation-mark = %x22      ; "
unescaped = %x20-21 / %x23-5B / %x5D-10FFFF

5. JSON-B

The JSON-B encoding defines the b-value and b-string productions:

b-value = b-atom | b-string | b-data | b-integer |
b-float
   
b-string = *( string-chunk ) string-term
b-data = *( data-chunk ) data-last
   
b-integer = p-int8 | p-int16 | p-int32 | p-int64 | p-bignum16 |
n-int8 | n-int16 | n-int32 | n-int64 | n-bignum16
   
b-float = binary64

The lexical encodings of the productions are defined in the following table where the column 'tag' specifies the byte code that begins the production, 'Fixed' specifies the number of data bytes that follow and 'Length' specifies the number of bytes used to define the length of a variable length field following the data bytes:

+--------------+-----+-------+--------+-----------------------------+

| Production | Tag | Fixed | Length | Data Description |

+--------------+-----+-------+--------+-----------------------------+

| string-term | x80 | - | 1 | Terminal String 8 bit |

| | | | | length |

| | | | | |

| string-term | x81 | - | 2 | Terminal String 16 bit |

| | | | | length |

| | | | | |

| string-term | x82 | - | 4 | Terminal String 32 bit |

| | | | | length |

| | | | | |

| string-term | x83 | - | 8 | Terminal String 64 bit |

| | | | | length |

| | | | | |

| string-chunk | x84 | - | 1 | Non-Terminal String 8 bit |

| | | | | length |

| | | | | |

| string-chunk | x85 | - | 2 | Non-Terminal String 16 bit |

| | | | | length |

| | | | | |

| string-chunk | x86 | - | 4 | Non-Terminal String 32 bit |

| | | | | length |

| | | | | |

| string-chunk | x87 | - | 8 | Non-Terminal String 64 bit |

| | | | | length |

| | | | | |

| data-term | x88 | - | 1 | Terminal Data 8 bit length |

| | | | | |

| data-term | x89 | - | 2 | Terminal Data 16 bit length |

| | | | | |

| data-term | x8A | - | 4 | Terminal Data 32 bit length |

| | | | | |

| data-term | x8B | - | 8 | Terminal Data 64 bit length |

| | | | | |

| data-chunk | x8C | - | 1 | Non-Terminal Data 8 bit |

| | | | | length |

| | | | | |

| data-chunk | x8D | - | 2 | Non-Terminal Data 16 bit |

| | | | | length |

| | | | | |

| data-chunk | x8E | - | 4 | Non-Terminal Data 32 bit |

| | | | | length |

| | | | | |

| data-chunk | x8F | - | 8 | Non-Terminal String 64 bit |

| | | | | length |

| | | | | |

| p-int8 | xA0 | 1 | - | Positive 8 bit Integer |

| | | | | |

| p-int16 | xA1 | 2 | - | Positive 16 bit Integer |

| | | | | |

| p-int32 | xA2 | 4 | - | Positive 32 bit Integer |

| | | | | |

| p-int64 | xA3 | 8 | - | Positive 64 bit Integer |

| | | | | |

| p-bignum16 | xA5 | - | 2 | Positive Bignum 16 bit |

| | | | | length |

| | | | | |

| n-int8 | xA8 | 1 | - | Negative 8 bit Integer |

| | | | | |

| n-int16 | xA9 | 2 | - | Negative 16 bit Integer |

| | | | | |

| n-int32 | xAA | 4 | - | Negative 32 bit Integer |

| | | | | |

| n-int64 | xAB | 8 | - | Negative 64 bit Integer |

| | | | | |

| n-bignum16 | xAD | - | 2 | Negative Bignum 16 bit |

| | | | | length |

| | | | | |

| binary64 | x92 | 8 | - | IEEE 754 Floating Point |

| | | | | binary64 |

| | | | | |

| b-value | xB0 | - | - | True |

| | | | | |

| b-value | xB1 | - | - | False |

| | | | | |

| b-value | xB2 | - | - | Null |

+--------------+-----+-------+--------+-----------------------------+

A data type commonly used in networking that is not defined in this scheme is a datetime representation. To define such a data type, a string containing a date-time value in Internet type format is typically used.

5.1. JSON-B Examples

The following examples show examples of using JSON-B encoding:

A0 2A                            42 (as 8 bit integer)
A1 00 2A                         42 (as 16 bit integer)
A2 00 00 00 2A                   42 (as 32 bit integer)
A3 00 00 00 00 00 00 00 2A       42 (as 64 bit integer)
A5 00 01 42                      42 (as Bignum)
   
80 05 48 65 6c 6c 6f             "Hello" (single chunk)
81 00 05 48 65 6c 6c 6f          "Hello" (single chunk)
84 05 48 65 6c 6c 6f 80 00       "Hello" (as two chunks)
   
92 3f f0 00 00 00 00 00 00       1.0
92 40 24 00 00 00 00 00 00       10.0
92 40 09 21 fb 54 44 2e ea       3.14159265359
92 bf f0 00 00 00 00 00 00       -1.0
   
B0                               true
B1                               false
B2                               null

6. JSON-C

JSON-C (Compressed) permits numeric code values to be substituted for strings and binary data. Tag codes MAY be 8, 16 or 32 bits long encoded in network byte order.

Tag codes MUST be defined before they are referenced. A Tag code MAY be defined before the corresponding data or string value is used or at the same time that it is used.

A dictionary is a list of tag code definitions. An encoding MAY incorporate definitions from a dictionary using the dict-hash production. The dict hash production specifies a (positive) offset value to be added to the entries in the dictionary and a hash code identifier consisting of the ASN.1 OID value sequence for the cryptographic digest used to compute the hash value followed by the hash value in network byte order.

+------------+-----+-------+--------+-------------------------------+

| Production | Tag | Fixed | Length | Data Description |

+------------+-----+-------+--------+-------------------------------+

| c-tag | xC0 | 1 | - | 8 bit tag code |

| | | | | |

| c-tag | xC1 | 2 | - | 16 bit tag code |

| | | | | |

| c-tag | xC2 | 4 | - | 32 bit tag code |

| | | | | |

| c-def | xC4 | 1 | - | 8 bit tag definition |

| | | | | |

| c-def | xC5 | 2 | - | 16 bit tag definition |

| | | | | |

| c-def | xC6 | 4 | - | 32 bit tag definition |

| | | | | |

| c-tag | xC8 | 1 | - | 8 bit tag code & definition |

| | | | | |

| c-tag | xC9 | 2 | - | 16 bit tag code & definition |

| | | | | |

| c-tag | xCA | 4 | - | 32 bit tag code & definition |

| | | | | |

| c-def | xCC | 1 | - | 8 bit tag dictionary |

| | | | | definition |

| | | | | |

| c-def | xCD | 2 | - | 16 bit tag dictionary |

| | | | | definition |

| | | | | |

| c-def | xCE | 4 | - | 32 bit tag dictionary |

| | | | | definition |

| | | | | |

| dict-hash | xD0 | 4 | 1 | Hash of dictionary |

+------------+-----+-------+--------+-------------------------------+

All integer values are encoded in Network Byte Order (most significant byte first).

6.1. JSON-C Examples

The following examples show examples of using JSON-C encoding:

C8 20 80 05 48 65 6c 6c 6f       "Hello"    20 = "Hello"
C4 21 80 05 48 65 6c 6c 6f                  21 = "Hello"
C0 20                            "Hello"
C1 00 20                         "Hello"
   
D0 00 00 01 00 1B                277 = "Hello"
06 09 60 86 48 01 65 03
04 02 01                         OID for SHA-2-256
e3 b0 c4 42 98 fc 1c 14
9a fb f4 c8 99 6f b9 24
27 ae 41 e4 64 9b 93 4c
a4 95 99 1b 78 52 b8 55       SHA-256(C4 21 80 05 48 65 6c 6c 6f)
                              [2.16.840.1.101.3.4.2.1]

7. JSON-D (Data)

JSON-B and JSON-C only support the two numeric types defined in the JavaScript data model: Integers and 64 bit floating point values. JSON-D (Data) defines binary encodings for additional data types that are commonly used in scientific applications. These comprise positive and negative 128 bit integers, six additional floating point representations defined by IEEE 754 [RFC2119] and the Intel extended precision 80 bit floating point representation.

Should the need arise, even bigger bignums could be defined with the length specified as a 32 bit value permitting bignums of up to 2^35 bits to be represented.

d-value = d-integer | d-float

d-float = binary16 | binary32 | binary128 | binary80 |

decimal32 | decimal64 | decimal 128

8.

+------------+-----+-------+--------+-------------------------------+

| Production | Tag | Fixed | Length | Data Description |

+------------+-----+-------+--------+-------------------------------+

| p-int128 | xA4 | 16 | - | Positive 128 bit Integer |

| | | | | |

| n-in7128 | xAC | 16 | - | Negative 128 bit Integer |

| | | | | |

| binary16 | x90 | 2 | - | IEEE 754 Floating Point |

| | | | | binary16 |

| | | | | |

| binary32 | x91 | 4 | - | IEEE 754 Floating Point |

| | | | | binary32 |

| | | | | |

| binary128 | x94 | 16 | - | IEEE 754 Floating Point |

| | | | | binary128 |

| | | | | |

| intel80 | x95 | 10 | - | Intel 80 bit extended binary |

| | | | | Floating Point |

| | | | | |

| decimal32 | x96 | 4 | - | IEEE 754 Floating Point |

| | | | | decimal32 |

| | | | | |

| decimal64 | x97 | 8 | - | IEEE 754 Floating Point |

| | | | | decimal64 |

| | | | | |

| decimal128 | x98 | 18 | - | IEEE 754 Floating Point |

| | | | | decimal128 |

+------------+-----+-------+--------+-------------------------------+

9.

10. Acknowledgements

This work was assisted by conversations with Nico Williams and other participants on the applications area mailing list.

11. Security Considerations

A correctly implemented data encoding mechanism should not introduce new security vulnerabilities. However, experience demonstrates that some data encoding approaches are more prone to introduce vulnerabilities when incorrectly implemented than others.

In particular, whenever variable length data formats are used, the possibility of a buffer overrun vulnerability is introduced. While best practice suggests that a coding language with native mechanisms for bounds checking is the best protection against such errors, such approaches are not always followed. While such vulnerabilities are most commonly seen in the design of decoders, it is possible for the same vulnerabilities to be exploited in encoders.

A common source of such errors is the case where nested length encodings are used. For example, a decoder relies on an outermost length encoding that specifies a length on 50 bytes to allocate memory for the entire result and then attempts to copy a string with a declared length of 1000 bytes within the sequence.

The extensions to the JSON encoding described in this document are designed to avoid such errors. Length encodings are only used to define the length of x-value constructions which are always terminal and cannot have nested data entries.

12. IANA Considerations

[TBS list out all the code points that require an IANA registration]

13. Normative References

[IEEE-754] , , "[Reference Not Found!]"

Author's Address

Phillip Hallam-BakerPhillip Hallam-Baker Comodo Group Inc. EMail: philliph@comodo.com

Table of Contents