Network Working Group Donald Eastlake 3rd INTERNET-DRAFT Stellar Switches Obsoletes: 4634 Tony Hansen Updates: 3174 AT&T Labs Intended Status: Informational Expires: January 29, 2011 July 30, 2010 US Secure Hash Algorithms (SHA and SHA based HMAC and HKDF) Abstract This document is an update of RFC 4634 to fix errata and to add code for an HMAC-based extract-and-expand key derivation function. The United States of America has adopted a suite of secure hash algorithms (SHAs), including four beyond SHA-1, as part of a Federal Information Processing Standard (FIPS), specifically SHA-224, SHA-256, SHA-384, and SHA-512. The purpose of this document is to make open source code performing the SHA hash functions conveniently available to the Internet community. The sample code supports input strings of arbitrary bit length. Much of the text herein was adapted by the authors from FIPS 180-2. As with RFC 4634, code to perform SHA based HMACs is included and, new in this version, code for HKDF (RFC 5869) is included. Status of This Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Distribution of this document is unlimited. Comments should be sent to the authors. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/1id-abstracts.html The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html D. Eastlake 3rd, T. Hansen [Page 1] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Table of Contents 1. Overview of Contents....................................3 2. Notation for Bit Strings and Integers...................4 3. Operations on Words.....................................5 4. Message Padding and Parsing.............................7 4.1 SHA-224 and SHA-256....................................7 4.2 SHA-384 and SHA-512....................................8 5. Functions and Constants Used...........................10 5.1 SHA-224 and SHA-256...................................10 5.2 SHA-384 and SHA-512...................................11 6. Computing the Message Digest...........................12 6.1 SHA-224 and SHA-256 Initialization....................12 6.2 SHA-224 and SHA-256 Processing........................12 6.3 SHA-384 and SHA-512 Initialization....................14 6.4 SHA-384 and SHA-512 Processing........................15 7. HKDF and SHA Based HMACs...............................17 7.1 SHA-Based HMACs.......................................17 7.2 HKDF..................................................17 8. C Code for SHAs, HMAC, and HKDF........................18 8.1 The Header Files......................................21 8.1.1 The .h file.........................................21 8.1.2 sha-private.h.......................................29 8.2 The SHA Code..........................................29 8.2.1 sha1.c..............................................29 8.2.2 sha224-256.c........................................38 8.2.3 sha384-512.c........................................50 8.2.4 usha.c..............................................71 8.3 The HMAC Code.........................................77 8.4 The HKDF Code.........................................82 8.5 The Test Driver.......................................89 9. IANA Considerations...................................120 10. Security Considerations..............................120 11. Acknowledgements.....................................120 12. References...........................................121 12.1 Normative References................................121 12.2 Informative References..............................121 Appendix: Changes from RFC 4634..........................123 Appendix Z: Edit History.................................124 Z.1 Changes from -00 to -01..............................124 Z.2 Changes from -01 to -02..............................124 Z.3 Changes from -02 to -03..............................124 D. Eastlake 3rd, T. Hansen [Page 2] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 1. Overview of Contents This document obsoletes [RFC4634]; and the changes from that RFC are summarized in the Appendix. This document includes specifications for the United States of America (USA) Federal Information Processing Standard (FIPS) Secure Hash Algorithms (SHAs), code to implement the SHAs, code to implement HMACs based on the SHAs, and code to implement HKDF based on HMAC. Specifications for HMAC and HKDF are not included as they appear elsewhere in the RFC series [RFC2104] [RFC5869]. NOTE: Much of the text below is taken from [SHS] and the assertions of the security of the hash algorithms described therein are made by the US Government, the author of [SHS], not by the authors of this document. The text below specifies Secure Hash Algorithms, SHA-224 [RFC3874], SHA-256, SHA-384, and SHA-512, for computing a condensed representation of a message or a data file. (SHA-1 is specified in [RFC3174].) When a message of any length < 2^64 bits (for SHA-224 and SHA-256) or < 2^128 bits (for SHA-384 and SHA-512) is input to one of these algorithms, the result is an output called a message digest. The message digests range in length from 224 to 512 bits, depending on the algorithm. Secure hash algorithms are typically used with other cryptographic algorithms, such as digital signature algorithms and keyed hash authentication codes, the generation of random numbers [RFC4086], or in key derivation functions. The four algorithms specified in this document are called secure because it is computationally infeasible to (1) find a message which corresponds to a given message digest, or (2) to find two different messages that produce the same message digest. Any change to a message in transit will, with very high probability, result in a different message digest. This will result in a verification failure when the secure hash algorithm is used with a digital signature algorithm or a keyed-hash message authentication algorithm. The code provided herein supports input strings of arbitrary bit length. SHA-1's sample code from [RFC3174] has also been updated to handle input strings of arbitrary bit length. Permission is granted for all uses, commercial and non-commercial, of this code. ASN.1 OIDs (Object Identifiers) for the SHA algorithms, taken from [RFC4055], are as follows: id-sha1 OBJECT IDENTIFIER ::= { iso(1) identified-organization(3) oiw(14) secsig(3) algorithms(2) 26 } D. Eastlake 3rd, T. Hansen [Page 3] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF id-sha224 OBJECT IDENTIFIER ::= {{ joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 4 } id-sha256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 1 } id-sha384 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 2 } id-sha512 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16) us(840) organization(1) gov(101) csor(3) nistalgorithm(4) hashalgs(2) 3 } Section 2 below defines the terminology and functions used as building blocks to form these algorithms. Section 3 describes the fundamental operations on words from which these algorithms are built. Section 4 describes how messages are padded up to an integral multiple of the required block size and then parsed into blocks. Section 5 defines the constants and the composite functions used to specify the hash algorithms. Section 6 gives the actual specification for the SHA-224, SHA-256, SHA-384, and SHA-512 functions. Section 7 provides pointers to the specification of HMAC keyed message authentication codes and to the specification of an extract-and- expand key derivation function based on HMAC. Section 8 gives sample code for the SHA algorithms, for SHA based HMACs, and for HMAC-based extract-and-expand key derivation function. 2. Notation for Bit Strings and Integers The following terminology related to bit strings and integers will be used: a. A hex digit is an element of the set {0, 1, ... , 9, A, ... , F}. A hex digit is the representation of a 4-bit string. Examples: 7 = 0111, A = 1010. b. A word equals a 32-bit or 64-bit string that may be represented as a sequence of 8 or 16 hex digits, respectively. To convert a word to hex digits, each 4-bit string is converted to its hex equivalent as described in (a) above. Example: 1010 0001 0000 0011 1111 1110 0010 0011 = A103FE23. Throughout this document, the "big-endian" convention is used when expressing both 32-bit and 64-bit words, so that within each word the most significant bit is shown in the leftmost bit position. D. Eastlake 3rd, T. Hansen [Page 4] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF c. An integer may be represented as a word or pair of words. An integer between 0 and 2^32 - 1 inclusive may be represented as a 32-bit word. The least significant four bits of the integer are represented by the rightmost hex digit of the word representation. Example: the integer 291 = 2^8+2^5+2^1+2^0 = 256+32+2+1 is represented by the hex word, 00000123. The same holds true for an integer between 0 and 2^64-1 inclusive, which may be represented as a 64-bit word. If Z is an integer, 0 <= z < 2^64, then z = (2^32)x + y where 0 <= x < 2^32 and 0 <= y < 2^32. Since x and y can be represented as words X and Y, respectively, z can be represented as the pair of words (X,Y). Again, the "big-endian" convention is used and the most significant word is in the leftmost word position for values represented by multiple-words. d. block = 512-bit or 1024-bit string. A block (e.g., B) may be represented as a sequence of 32-bit or 64-bit words. 3. Operations on Words The following logical operators will be applied to words in all four hash operations specified herein. SHA-224 and SHA-256 operate on 32-bit words while SHA-384 and SHA-512 operate on 64-bit words. In the operations below, x<>n is obtained as follows: discard the rightmost n bits of x and then prepend the result with n zeroed bits on the left (the result will still be the same number of bits). a. Bitwise logical word operations X AND Y = bitwise logical "and" of X and Y. X OR Y = bitwise logical "inclusive-or" of X and Y. X XOR Y = bitwise logical "exclusive-or" of X and Y. NOT X = bitwise logical "complement" of X. D. Eastlake 3rd, T. Hansen [Page 5] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Example: 01101100101110011101001001111011 XOR 01100101110000010110100110110111 -------------------------------- = 00001001011110001011101111001100 b. The operation X + Y is defined as follows: words X and Y represent w-bit integers x and y, where 0 <= x < 2^w and 0 <= y < 2^w. For positive integers n and m, let n mod m be the remainder upon dividing n by m. Compute z = (x + y) mod 2^w. Then 0 <= z < 2^w. Convert z to a word, Z, and define Z = X + Y. c. The right shift operation SHR^n(x), where x is a w-bit word and n is an integer with 0 <= n < w, is defined by SHR^n(x) = x>>n d. The rotate right (circular right shift) operation ROTR^n(x), where x is a w-bit word and n is an integer with 0 <= n < w, is defined by ROTR^n(x) = (x>>n) OR (x<<(w-n)) e. The rotate left (circular left shift) operation ROTL^n(x), where x is a w-bit word and n is an integer with 0 <= n < w, is defined by ROTL^n(X) = (x<>w-n) Note the following equivalence relationships, where w is fixed in each relationship: ROTL^n(x) = ROTR^(w-n)(x) ROTR^n(x) = ROTL^(w-n)(x) D. Eastlake 3rd, T. Hansen [Page 6] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 4. Message Padding and Parsing The hash functions specified herein are used to compute a message digest for a message or data file that is provided as input. The message or data file should be considered to be a bit string. The length of the message is the number of bits in the message (the empty message has length 0). If the number of bits in a message is a multiple of 8, for compactness we can represent the message in hex. The purpose of message padding is to make the total length of a padded message a multiple of 512 for SHA-224 and SHA-256 or a multiple of 1024 for SHA-384 and SHA-512. The following specifies how this padding shall be performed. As a summary, a "1" followed by m "0"s followed by a 64-bit or 128-bit integer are appended to the end of the message to produce a padded message of length 512*n or 1024*n. The appended integer is the length of the original message. The padded message is then processed by the hash function as n 512-bit or 1024-bit blocks. 4.1 SHA-224 and SHA-256 Suppose a message has length L < 2^64. Before it is input to the hash function, the message is padded on the right as follows: a. "1" is appended. Example: if the original message is "01010000", this is padded to "010100001". b. K "0"s are appended where K is the smallest, non-negative solution to the equation L + 1 + K = 448 (mod 512) c. Then append the 64-bit block that is L in binary representation. After appending this block, the length of the message will be a multiple of 512 bits. Example: Suppose the original message is the bit string 01100001 01100010 01100011 01100100 01100101 After step (a) this gives 01100001 01100010 01100011 01100100 01100101 1 Since L = 40, the number of bits in the above is 41 and K = 407 "0"s are appended, making the total now 448. This gives the following in hex: D. Eastlake 3rd, T. Hansen [Page 7] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 61626364 65800000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 The 64-bit representation of L = 40 is hex 00000000 00000028. Hence the final padded message is the following hex 61626364 65800000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000028 4.2 SHA-384 and SHA-512 Suppose a message has length L < 2^128. Before it is input to the hash function, the message is padded on the right as follows: a. "1" is appended. Example: if the original message is "01010000", this is padded to "010100001". b. K "0"s are appended where K is the smallest, non-negative solution to the equation L + 1 + K = 896 (mod 1024) c. Then append the 128-bit block that is L in binary representation. After appending this block, the length of the message will be a multiple of 1024 bits. Example: Suppose the original message is the bit string 01100001 01100010 01100011 01100100 01100101 After step (a) this gives 01100001 01100010 01100011 01100100 01100101 1 Since L = 40, the number of bits in the above is 41 and K = 855 "0"s are appended, making the total now 896. This gives the following in hex: 61626364 65800000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 D. Eastlake 3rd, T. Hansen [Page 8] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 00000000 00000000 00000000 00000000 The 128-bit representation of L = 40 is hex 00000000 00000000 00000000 00000028. Hence the final padded message is the following hex: 61626364 65800000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000028 D. Eastlake 3rd, T. Hansen [Page 9] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 5. Functions and Constants Used The following subsections give the six logical functions and the table of constants used in each of the hash functions. 5.1 SHA-224 and SHA-256 SHA-224 and SHA-256 use six logical functions, where each function operates on 32-bit words, which are represented as x, y, and z. The result of each function is a new 32-bit word. CH( x, y, z) = (x AND y) XOR ( (NOT x) AND z) MAJ( x, y, z) = (x AND y) XOR (x AND z) XOR (y AND z) BSIG0(x) = ROTR^2(x) XOR ROTR^13(x) XOR ROTR^22(x) BSIG1(x) = ROTR^6(x) XOR ROTR^11(x) XOR ROTR^25(x) SSIG0(x) = ROTR^7(x) XOR ROTR^18(x) XOR SHR^3(x) SSIG1(x) = ROTR^17(x) XOR ROTR^19(x) XOR SHR^10(x) SHA-224 and SHA-256 use the same sequence of sixty-four constant 32-bit words, K0, K1, ..., K63. These words represent the first thirty-two bits of the fractional parts of the cube roots of the first sixty-four prime numbers. In hex, these constant words are as follows (from left to right): 428a2f98 71374491 b5c0fbcf e9b5dba5 3956c25b 59f111f1 923f82a4 ab1c5ed5 d807aa98 12835b01 243185be 550c7dc3 72be5d74 80deb1fe 9bdc06a7 c19bf174 e49b69c1 efbe4786 0fc19dc6 240ca1cc 2de92c6f 4a7484aa 5cb0a9dc 76f988da 983e5152 a831c66d b00327c8 bf597fc7 c6e00bf3 d5a79147 06ca6351 14292967 27b70a85 2e1b2138 4d2c6dfc 53380d13 650a7354 766a0abb 81c2c92e 92722c85 a2bfe8a1 a81a664b c24b8b70 c76c51a3 d192e819 d6990624 f40e3585 106aa070 19a4c116 1e376c08 2748774c 34b0bcb5 391c0cb3 4ed8aa4a 5b9cca4f 682e6ff3 748f82ee 78a5636f 84c87814 8cc70208 90befffa a4506ceb bef9a3f7 c67178f2 D. Eastlake 3rd, T. Hansen [Page 10] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 5.2 SHA-384 and SHA-512 SHA-384 and SHA-512 each use six logical functions, where each function operates on 64-bit words, which are represented as x, y, and z. The result of each function is a new 64-bit word. CH( x, y, z) = (x AND y) XOR ( (NOT x) AND z) MAJ( x, y, z) = (x AND y) XOR (x AND z) XOR (y AND z) BSIG0(x) = ROTR^28(x) XOR ROTR^34(x) XOR ROTR^39(x) BSIG1(x) = ROTR^14(x) XOR ROTR^18(x) XOR ROTR^41(x) SSIG0(x) = ROTR^1(x) XOR ROTR^8(x) XOR SHR^7(x) SSIG1(x) = ROTR^19(x) XOR ROTR^61(x) XOR SHR^6(x) SHA-384 and SHA-512 use the same sequence of eighty constant 64-bit words, K0, K1, ... K79. These words represent the first sixty-four bits of the fractional parts of the cube roots of the first eighty prime numbers. In hex, these constant words are as follows (from left to right): 428a2f98d728ae22 7137449123ef65cd b5c0fbcfec4d3b2f e9b5dba58189dbbc 3956c25bf348b538 59f111f1b605d019 923f82a4af194f9b ab1c5ed5da6d8118 d807aa98a3030242 12835b0145706fbe 243185be4ee4b28c 550c7dc3d5ffb4e2 72be5d74f27b896f 80deb1fe3b1696b1 9bdc06a725c71235 c19bf174cf692694 e49b69c19ef14ad2 efbe4786384f25e3 0fc19dc68b8cd5b5 240ca1cc77ac9c65 2de92c6f592b0275 4a7484aa6ea6e483 5cb0a9dcbd41fbd4 76f988da831153b5 983e5152ee66dfab a831c66d2db43210 b00327c898fb213f bf597fc7beef0ee4 c6e00bf33da88fc2 d5a79147930aa725 06ca6351e003826f 142929670a0e6e70 27b70a8546d22ffc 2e1b21385c26c926 4d2c6dfc5ac42aed 53380d139d95b3df 650a73548baf63de 766a0abb3c77b2a8 81c2c92e47edaee6 92722c851482353b a2bfe8a14cf10364 a81a664bbc423001 c24b8b70d0f89791 c76c51a30654be30 d192e819d6ef5218 d69906245565a910 f40e35855771202a 106aa07032bbd1b8 19a4c116b8d2d0c8 1e376c085141ab53 2748774cdf8eeb99 34b0bcb5e19b48a8 391c0cb3c5c95a63 4ed8aa4ae3418acb 5b9cca4f7763e373 682e6ff3d6b2b8a3 748f82ee5defb2fc 78a5636f43172f60 84c87814a1f0ab72 8cc702081a6439ec 90befffa23631e28 a4506cebde82bde9 bef9a3f7b2c67915 c67178f2e372532b ca273eceea26619c d186b8c721c0c207 eada7dd6cde0eb1e f57d4f7fee6ed178 06f067aa72176fba 0a637dc5a2c898a6 113f9804bef90dae 1b710b35131c471b 28db77f523047d84 32caab7b40c72493 3c9ebe0a15c9bebc 431d67c49c100d4c 4cc5d4becb3e42b6 597f299cfc657e2a 5fcb6fab3ad6faec 6c44198c4a475817 D. Eastlake 3rd, T. Hansen [Page 11] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 6. Computing the Message Digest The output of each of the secure hash functions, after being applied to a message of N blocks, is the hash quantity H(N). For SHA-224 and SHA-256, H(i) can be considered to be eight 32-bit words, H(i)0, H(i)1, ... H(i)7. For SHA-384 and SHA-512, it can be considered to be eight 64-bit words, H(i)0, H(i)1, ..., H(i)7. As described below, the hash words are initialized, modified as each message block is processed, and finally concatenated after processing the last block to yield the output. For SHA-256 and SHA-512, all of the H(N) variables are concatenated while the SHA-224 and SHA-384 hashes are produced by omitting some from the final concatenation. 6.1 SHA-224 and SHA-256 Initialization For SHA-224, the initial hash value, H(0), consists of the following 32-bit words in hex: H(0)0 = c1059ed8 H(0)1 = 367cd507 H(0)2 = 3070dd17 H(0)3 = f70e5939 H(0)4 = ffc00b31 H(0)5 = 68581511 H(0)6 = 64f98fa7 H(0)7 = befa4fa4 For SHA-256, the initial hash value, H(0), consists of the following eight 32-bit words, in hex. These words were obtained by taking the first thirty-two bits of the fractional parts of the square roots of the first eight prime numbers. H(0)0 = 6a09e667 H(0)1 = bb67ae85 H(0)2 = 3c6ef372 H(0)3 = a54ff53a H(0)4 = 510e527f H(0)5 = 9b05688c H(0)6 = 1f83d9ab H(0)7 = 5be0cd19 6.2 SHA-224 and SHA-256 Processing SHA-224 and SHA-256 perform identical processing on messages blocks and differ only in how H(0) is initialized and how they produce their D. Eastlake 3rd, T. Hansen [Page 12] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF final output. They may be used to hash a message, M, having a length of L bits, where 0 <= L < 2^64. The algorithm uses (1) a message schedule of sixty-four 32-bit words, (2) eight working variables of 32 bits each, and (3) a hash value of eight 32-bit words. The words of the message schedule are labeled W0, W1, ..., W63. The eight working variables are labeled a, b, c, d, e, f, g, and h. The words of the hash value are labeled H(i)0, H(i)1, ..., H(i)7, which will hold the initial hash value, H(0), replaced by each successive intermediate hash value (after each message block is processed), H(i), and ending with the final hash value, H(N), after all N blocks are processed. They also use two temporary words, T1 and T2. The input message is padded as described in Section 4.1 above then parsed into 512-bit blocks that are considered to be composed of 16 32-bit words M(i)0, M(i)1, ..., M(i)15. The following computations are then performed for each of the N message blocks. All addition is performed modulo 2^32. For i = 1 to N 1. Prepare the message schedule W: For t = 0 to 15 Wt = M(i)t For t = 16 to 63 Wt = SSIG1(W(t-2)) + W(t-7) + SSIG0(w(t-15)) + W(t-16) 2. Initialize the working variables: a = H(i-1)0 b = H(i-1)1 c = H(i-1)2 d = H(i-1)3 e = H(i-1)4 f = H(i-1)5 g = H(i-1)6 h = H(i-1)7 3. Perform the main hash computation: For t = 0 to 63 T1 = h + BSIG1(e) + CH(e,f,g) + Kt + Wt T2 = BSIG0(a) + MAJ(a,b,c) h = g g = f f = e e = d + T1 d = c c = b b = a a = T1 + T2 D. Eastlake 3rd, T. Hansen [Page 13] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 4. Compute the intermediate hash value H(i) H(i)0 = a + H(i-1)0 H(i)1 = b + H(i-1)1 H(i)2 = c + H(i-1)2 H(i)3 = d + H(i-1)3 H(i)4 = e + H(i-1)4 H(i)5 = f + H(i-1)5 H(i)6 = g + H(i-1)6 H(i)7 = h + H(i-1)7 After the above computations have been sequentially performed for all of the blocks in the message, the final output is calculated. For SHA-256, this is the concatenation of all of H(N)0, H(N)1, through H(N)7. For SHA-224, this is the concatenation of H(N)0, H(N)1, through H(N)6. 6.3 SHA-384 and SHA-512 Initialization For SHA-384, the initial hash value, H(0), consists of the following eight 64-bit words, in hex. These words were obtained by taking the first sixty-four bits of the fractional parts of the square roots of the ninth through sixteenth prime numbers. H(0)0 = cbbb9d5dc1059ed8 H(0)1 = 629a292a367cd507 H(0)2 = 9159015a3070dd17 H(0)3 = 152fecd8f70e5939 H(0)4 = 67332667ffc00b31 H(0)5 = 8eb44a8768581511 H(0)6 = db0c2e0d64f98fa7 H(0)7 = 47b5481dbefa4fa4 For SHA-512, the initial hash value, H(0), consists of the following eight 64-bit words, in hex. These words were obtained by taking the first sixty-four bits of the fractional parts of the square roots of the first eight prime numbers. H(0)0 = 6a09e667f3bcc908 H(0)1 = bb67ae8584caa73b H(0)2 = 3c6ef372fe94f82b H(0)3 = a54ff53a5f1d36f1 H(0)4 = 510e527fade682d1 H(0)5 = 9b05688c2b3e6c1f H(0)6 = 1f83d9abfb41bd6b H(0)7 = 5be0cd19137e2179 D. Eastlake 3rd, T. Hansen [Page 14] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 6.4 SHA-384 and SHA-512 Processing SHA-384 and SHA-512 perform identical processing on message blocks and differ only in how H(0) is initialized and how they produce their final output. They may be used to hash a message, M, having a length of L bits, where 0 <= L < 2^128. The algorithm uses (1) a message schedule of eighty 64-bit words, (2) eight working variables of 64 bits each, and (3) a hash value of eight 64-bit words. The words of the message schedule are labeled W0, W1, ..., W79. The eight working variables are labeled a, b, c, d, e, f, g, and h. The words of the hash value are labeled H(i)0, H(i)1, ..., H(i)7 which will hold the initial hash value, H(0), replaced by each successive intermediate hash value (after each message block is processed), H(i), and ending with the final hash value, H(N) after all N blocks are processed. The input message is padded as described in Section 4.2 above, then parsed into 1024-bit blocks that are considered to be composed of 16 64-bit words M(i)0, M(i)1, ..., M(i)15. The following computations are then performed for each of the N message blocks. All addition is performed modulo 2^64. For i = 1 to N 1. Prepare the message schedule W: For t = 0 to 15 Wt = M(i)t For t = 16 to 79 Wt = SSIG1(W(t-2)) + W(t-7) + SSIG0(W(t-15)) + W(t-16) 2. Initialize the working variables: a = H(i-1)0 b = H(i-1)1 c = H(i-1)2 d = H(i-1)3 e = H(i-1)4 f = H(i-1)5 g = H(i-1)6 h = H(i-1)7 3. Perform the main hash computation: For t = 0 to 79 T1 = h + BSIG1(e) + CH(e,f,g) + Kt + Wt T2 = BSIG0(a) + MAJ(a,b,c) h = g g = f f = e e = d + T1 d = c D. Eastlake 3rd, T. Hansen [Page 15] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF c = b b = a a = T1 + T2 4. Compute the intermediate hash value H(i) H(i)0 = a + H(i-1)0 H(i)1 = b + H(i-1)1 H(i)2 = c + H(i-1)2 H(i)3 = d + H(i-1)3 H(i)4 = e + H(i-1)4 H(i)5 = f + H(i-1)5 H(i)6 = g + H(i-1)6 H(i)7 = h + H(i-1)7 After the above computations have been sequentially performed for all of the blocks in the message, the final output is calculated. For SHA-512, this is the concatenation of all of H(N)0, H(N)1, through H(N)7. For SHA-384, this is the concatenation of H(N)0, H(N)1, through H(N)5. D. Eastlake 3rd, T. Hansen [Page 16] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 7. HKDF and SHA Based HMACs Below are brief descriptions and pointers to more complete descriptions and code for (1) SHA-based HMACs and (2) an HMAC-based extract-and-expand key derivation function. Both HKDF and HMAC were devised by Hugo Krawczyk. 7.1 SHA-Based HMACs HMAC is a method for computing a keyed MAC (message authentication code) using a hash function as described in [RFC2104]. It uses a key to mix in with the input text to produce the final hash. Sample code is also provided, in Section 8.3 below, to perform HMAC based on any of the SHA algorithms described herein. The sample code found in [RFC2104] was written in terms of a specified text size. Since SHA is defined in terms of an arbitrary number of bits, the sample HMAC code has been written to allow the text input to HMAC to have an arbitrary number of octets and bits. A fixed length interface is also provided. 7.2 HKDF HKDF is a specific key derivation function (KDF), that is, a function of initial keying material from which the KDF derives one or more cryptographically strong secret keys. HKDF, which is described in [RFC5869], is based on HMAC. Sample code for HKDF is provided in Section 8.4 below. D. Eastlake 3rd, T. Hansen [Page 17] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 8. C Code for SHAs, HMAC, and HKDF Below is a demonstration implementation of these secure hash functions in C. Section 8.1 contains the header file sha.h that declares all constants, structures and functions used by the sha and hmac functions. It includes conditionals based on the state of definition of USE_32BIT_ONLY which, if that symbol is defined at compile time, avoids 64-bit operations. It also contains sha- private.h that provides some declarations common to all the sha functions. Section 8.2 contains the C code for sha1.c, sha224-256.c, sha384-512.c, and usha.c. Section 8.3 contains the C code for the HMAC functions and Section 8.4 contains the C code for HKDF. Section 8.5 contains a test driver to exercise the code. For each of the digest lengths $$$, there are the following set of constants, a structure, and functions: Constants: SHA$$$HashSize number of octets in the hash SHA$$$HashSizeBits number of bits in the hash SHA$$$_Message_Block_Size number of octets used in the intermediate message blocks Most functions return an enum value that is one of: shaSuccess(0) on success shaNull(1) when presented with a null pointer parameter shaInputTooLong(2) when the input data is too long shaStateError(3) when SHA$$$Input is called after SHA$$$FinalBits or SHA$$$Result. Structure: typedef SHA$$$Context an opaque structure holding the complete state for producing the hash Functions: int SHA$$$Reset(SHA$$$Context *context); Reset the hash context state int SHA$$$Input(SHA$$$Context *context, const uint8_t *octets, unsigned int bytecount); Incorporate bytecount octets into the hash. int SHA$$$FinalBits(SHA$$$Context *, const uint8_t octet, unsigned int bitcount); Incorporate bitcount bits into the hash. The bits are in the upper portion of the octet. SHA$$$Input() cannot be called after this. int SHA$$$Result(SHA$$$Context *, uint8_t Message_Digest[SHA$$$HashSize]); Do the final calculations on the hash and copy the value into Message_Digest. D. Eastlake 3rd, T. Hansen [Page 18] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF In addition, functions with the prefix USHA are provided that take a SHAversion value (SHA$$$) to select the SHA function suite. They add the following constants, structure and function: Constants: shaBadParam(4) constant returned by USHA functions when presented with a bad SHAversion (SHA$$$) parameter or other illegal parameter values USAMaxHashSize maximumof the SHA has sizes SHA$$$ SHAversion enumeration values, used by usha, hmac and hkdf functions to select the SHA function suite Structure: typedef USHAContext an opaque structure holding the complete state for producing the hash Functions: int USHAReset(USHAContext *context, SHAversion whichSha); Reset the hash context state. int USHAInput(USHAContext context*, const uint8_t *bytes, unsigned int bytecount); Incorporate bytecount octets into the hash. int USHAFinalBits(USHAContext *context, const uint8_t bits, unsigned int bitcount); Incorporate bitcount bits into the hash. int USHAResult(USHAContext *context, uint8_t Message_Digest[USHAMaxHashSize]); Do the final calculations on the hash and copy the value into Message_Digest. Octets in Message_Digest beyond USHAHashSize(whichSha) are left untouched. int USHAHashSize(enum SHAversion whichSha); The number of octets in the given hash. int USHAHashSizeBits(enum SHAversion whichSha); The number of bits in the given hash. int USHABlockSize(enum SHAversion whichSha); The internal block size for the given hash. const char *USHAHashName(enum SHAversion whichSha); This function will return the name of the given SHA algorithm as a string. The hmac functions follow the same pattern to allow any length of text input to be used. Structures: typedef HMACContext an opaque structure holding the complete state for producing the keyed message digest (MAC) D. Eastlake 3rd, T. Hansen [Page 19] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Functions: int hmacReset(HMACContext *ctx, enum SHAversion whichSha, const unsigned char *key, int key_len); Reset the MAC context state. int hmacInput(HMACContext *ctx, const unsigned char *text, int text_len); Incorporate text_len octets into the MAC. int hmacFinalBits(HMACContext *ctx, const uint8_t bits, unsigned int bitcount); Incorporate bitcount bits into the MAC. int hmacResult(HMACContext *ctx, uint8_t Message_Digest[USHAMaxHashSize]); Do the final calculations on the MAC and copy the value into Message_Digest. Octets in Message_Digest beyond USHAHashSize(whichSha) are left untouched. In addition, a combined interface is provided, similar to that shown in [RFC2104], that allows a fixed-length text input to be used. int hmac(SHAversion whichSha, const unsigned char *text, int text_len, const unsigned char *key, int key_len, uint8_t Message_Digest[USHAMaxHashSize]); Calculate the given digest for the given text and key, and return the resulting MAC. Octets in Message_Digest beyond USHAHashSize(whichSha) are left untouched. The hkdf functions follow the same pattern to allow any length of text input to be used. Structures: typedef HKDFContext an opaque structure holding the complete state for producing the keying material Functions: int hkdfReset(HKDFContext *context, enum SHAversion whichSha, const unsigned char *salt, int salt_len) Reset the key derivation state and initialize it with the salt_len octets of the optional salt. int hkdfInput(HKDFContext *context, const unsigned char *ikm, int ikm_len) Incorporate ikm_len octets into the entropy extractor. int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, unsigned int ikm_bit_count) Incorporate ikm_bit_count bits into the entropy extractor. int hkdfResult(HKDFContext *context, uint8_t prk[USHAMaxHashSize], const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len) Finish the HKDF extraction and perform the final HKDF expansion, storing the okm_len octets into okm. Optionally D. Eastlake 3rd, T. Hansen [Page 20] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF store the pseudo-random key (prk) that is generated internally. In addition, combined interfaces are provided, similar to that shown in [RFC5869], that allows a fixed-length text input to be used. int hkdfExtract(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, uint8_t prk[USHAMaxHashSize]) Perform HKDF extraction, combining the salt_len octets of the optional salt with the ikm_len octets of the input keying material (ikm) to form the pseudo-random key prk. The output prk must be large enough to hold the octets appropriate for the given hash type. int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], int prk_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len) Perform HKDF expansion, combining the prk_len octets of the pseudo-random key prk with the info_len octets of info to form the okm_len octets stored in okm. int hkdf(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len) This combined interface performs both HKDF extraction and expansion. The variables are the same as in hkdfExtract() and hkdfExpand(). 8.1 The Header Files 8.1.1 The .h file /**************************** sha.h ****************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: D. Eastlake 3rd, T. Hansen [Page 21] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Internet Society, IETF or IETF Trust, nor the names of specific contributors, may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _SHA_H_ #define _SHA_H_ /* * Description: * This file implements the Secure Hash Algorithms * as defined in the National Institute of Standards * and Technology Federal Information Processing Standards * Publication (FIPS PUB) 180-1 published on April 17, 1995, 180-2 * published on August 1, 2002, and the FIPS PUB 180-2 Change * Notice published on February 28, 2004. * * A combined document showing all algorithms is available at * http://csrc.nist.gov/publications/fips/ * fips180-2/fips180-2withchangenotice.pdf * * The five hashes are defined in these sizes: * SHA-1 20 byte / 160 bit * SHA-224 28 byte / 224 bit * SHA-256 32 byte / 256 bit * SHA-384 48 byte / 384 bit * SHA-512 64 byte / 512 bit * * Compilation Note: D. Eastlake 3rd, T. Hansen [Page 22] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * These files may be compiled with two options: * USE_32BIT_ONLY - use 32-bit arithmetic only, for systems * without 64-bit integers * * USE_MODIFIED_MACROS - use alternate form of the SHA_Ch() * and SHA_Maj() macros that are equivalent * and potentially faster on many systems * */ #include /* * If you do not have the ISO standard stdint.h header file, then you * must typedef the following: * name meaning * uint64_t unsigned 64 bit integer * uint32_t unsigned 32 bit integer * uint8_t unsigned 8 bit integer (i.e., unsigned char) * int_least16_t integer of >= 16 bits * */ #ifndef _SHA_enum_ #define _SHA_enum_ /* * All SHA functions return one of these values. */ enum { shaSuccess = 0, shaNull, /* Null pointer parameter */ shaInputTooLong, /* input data too long */ shaStateError, /* called Input after FinalBits or Result */ shaBadParam /* passed a bad parameter */ }; #endif /* _SHA_enum_ */ /* * These constants hold size information for each of the SHA * hashing operations */ enum { SHA1_Message_Block_Size = 64, SHA224_Message_Block_Size = 64, SHA256_Message_Block_Size = 64, SHA384_Message_Block_Size = 128, SHA512_Message_Block_Size = 128, USHA_Max_Message_Block_Size = SHA512_Message_Block_Size, SHA1HashSize = 20, SHA224HashSize = 28, SHA256HashSize = 32, SHA384HashSize = 48, SHA512HashSize = 64, USHAMaxHashSize = SHA512HashSize, D. Eastlake 3rd, T. Hansen [Page 23] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF SHA1HashSizeBits = 160, SHA224HashSizeBits = 224, SHA256HashSizeBits = 256, SHA384HashSizeBits = 384, SHA512HashSizeBits = 512, USHAMaxHashSizeBits = SHA512HashSizeBits }; /* * These constants are used in the USHA (unified sha) functions. */ typedef enum SHAversion { SHA1, SHA224, SHA256, SHA384, SHA512 } SHAversion; /* * This structure will hold context information for the SHA-1 * hashing operation. */ typedef struct SHA1Context { uint32_t Intermediate_Hash[SHA1HashSize/4]; /* Message Digest */ uint32_t Length_Low; /* Message length in bits */ uint32_t Length_High; /* Message length in bits */ int_least16_t Message_Block_Index; /* Message_Block array index */ /* 512-bit message blocks */ uint8_t Message_Block[SHA1_Message_Block_Size]; int Computed; /* Is the digest computed? */ int Corrupted; /* Is the digest corrupted? */ } SHA1Context; /* * This structure will hold context information for the SHA-256 * hashing operation. */ typedef struct SHA256Context { uint32_t Intermediate_Hash[SHA256HashSize/4]; /* Message Digest */ uint32_t Length_Low; /* Message length in bits */ uint32_t Length_High; /* Message length in bits */ int_least16_t Message_Block_Index; /* Message_Block array index */ /* 512-bit message blocks */ uint8_t Message_Block[SHA256_Message_Block_Size]; int Computed; /* Is the digest computed? */ int Corrupted; /* Is the digest corrupted? */ } SHA256Context; /* * This structure will hold context information for the SHA-512 D. Eastlake 3rd, T. Hansen [Page 24] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * hashing operation. */ typedef struct SHA512Context { #ifdef USE_32BIT_ONLY uint32_t Intermediate_Hash[SHA512HashSize/4]; /* Message Digest */ uint32_t Length[4]; /* Message length in bits */ #else /* !USE_32BIT_ONLY */ uint64_t Intermediate_Hash[SHA512HashSize/8]; /* Message Digest */ uint64_t Length_Low, Length_High; /* Message length in bits */ #endif /* USE_32BIT_ONLY */ int_least16_t Message_Block_Index; /* Message_Block array index */ /* 1024-bit message blocks */ uint8_t Message_Block[SHA512_Message_Block_Size]; int Computed; /* Is the digest computed?*/ int Corrupted; /* Is the digest corrupted? */ } SHA512Context; /* * This structure will hold context information for the SHA-224 * hashing operation. It uses the SHA-256 structure for computation. */ typedef struct SHA256Context SHA224Context; /* * This structure will hold context information for the SHA-384 * hashing operation. It uses the SHA-512 structure for computation. */ typedef struct SHA512Context SHA384Context; /* * This structure holds context information for all SHA * hashing operations. */ typedef struct USHAContext { int whichSha; /* which SHA is being used */ union { SHA1Context sha1Context; SHA224Context sha224Context; SHA256Context sha256Context; SHA384Context sha384Context; SHA512Context sha512Context; } ctx; } USHAContext; /* * This structure will hold context information for the HMAC * keyed hashing operation. */ typedef struct HMACContext { int whichSha; /* which SHA is being used */ D. Eastlake 3rd, T. Hansen [Page 25] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF int hashSize; /* hash size of SHA being used */ int blockSize; /* block size of SHA being used */ USHAContext shaContext; /* SHA context */ unsigned char k_opad[USHA_Max_Message_Block_Size]; /* outer padding - key XORd with opad */ int Computed; /* Is the digest computed? */ int Corrupted; /* Is the digest corrupted? */ } HMACContext; /* * This structure will hold context information for the HKDF * Extract-and-Expand Key Derivation functions. */ typedef struct HKDFContext { int whichSha; /* which SHA is being used */ HMACContext hmacContext; int hashSize; /* hash size of SHA being used */ unsigned char prk[USHAMaxHashSize]; /* Pseudo Random Key - output of hkdfInput */ int Computed; /* Is the digest computed? */ int Corrupted; /* Is the digest corrupted? */ } HKDFContext; /* * Function Prototypes */ /* SHA-1 */ extern int SHA1Reset(SHA1Context *); extern int SHA1Input(SHA1Context *, const uint8_t *bytes, unsigned int bytecount); extern int SHA1FinalBits(SHA1Context *, uint8_t bits, unsigned int bit_count); extern int SHA1Result(SHA1Context *, uint8_t Message_Digest[SHA1HashSize]); /* SHA-224 */ extern int SHA224Reset(SHA224Context *); extern int SHA224Input(SHA224Context *, const uint8_t *bytes, unsigned int bytecount); extern int SHA224FinalBits(SHA224Context *, uint8_t bits, unsigned int bit_count); extern int SHA224Result(SHA224Context *, uint8_t Message_Digest[SHA224HashSize]); /* SHA-256 */ extern int SHA256Reset(SHA256Context *); extern int SHA256Input(SHA256Context *, const uint8_t *bytes, D. Eastlake 3rd, T. Hansen [Page 26] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF unsigned int bytecount); extern int SHA256FinalBits(SHA256Context *, uint8_t bits, unsigned int bit_count); extern int SHA256Result(SHA256Context *, uint8_t Message_Digest[SHA256HashSize]); /* SHA-384 */ extern int SHA384Reset(SHA384Context *); extern int SHA384Input(SHA384Context *, const uint8_t *bytes, unsigned int bytecount); extern int SHA384FinalBits(SHA384Context *, uint8_t bits, unsigned int bit_count); extern int SHA384Result(SHA384Context *, uint8_t Message_Digest[SHA384HashSize]); /* SHA-512 */ extern int SHA512Reset(SHA512Context *); extern int SHA512Input(SHA512Context *, const uint8_t *bytes, unsigned int bytecount); extern int SHA512FinalBits(SHA512Context *, uint8_t bits, unsigned int bit_count); extern int SHA512Result(SHA512Context *, uint8_t Message_Digest[SHA512HashSize]); /* Unified SHA functions, chosen by whichSha */ extern int USHAReset(USHAContext *context, SHAversion whichSha); extern int USHAInput(USHAContext *context, const uint8_t *bytes, unsigned int bytecount); extern int USHAFinalBits(USHAContext *context, uint8_t bits, unsigned int bit_count); extern int USHAResult(USHAContext *context, uint8_t Message_Digest[USHAMaxHashSize]); extern int USHABlockSize(enum SHAversion whichSha); extern int USHAHashSize(enum SHAversion whichSha); extern int USHAHashSizeBits(enum SHAversion whichSha); extern const char *USHAHashName(enum SHAversion whichSha); /* * HMAC Keyed-Hashing for Message Authentication, RFC 2104, * for all SHAs. * This interface allows a fixed-length text input to be used. */ extern int hmac(SHAversion whichSha, /* which SHA algorithm to use */ const unsigned char *text, /* pointer to data stream */ int text_len, /* length of data stream */ const unsigned char *key, /* pointer to authentication key */ int key_len, /* length of authentication key */ uint8_t digest[USHAMaxHashSize]); /* caller digest to fill in */ /* D. Eastlake 3rd, T. Hansen [Page 27] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * HMAC Keyed-Hashing for Message Authentication, RFC 2104, * for all SHAs. * This interface allows any length of text input to be used. */ extern int hmacReset(HMACContext *context, enum SHAversion whichSha, const unsigned char *key, int key_len); extern int hmacInput(HMACContext *context, const unsigned char *text, int text_len); extern int hmacFinalBits(HMACContext *context, uint8_t bits, unsigned int bit_count); extern int hmacResult(HMACContext *context, uint8_t digest[USHAMaxHashSize]); /* * HKDF HMAC-based Extract-and-Expand Key Derivation Function, * RFC 5869, for all SHAs. */ extern int hkdf(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len); extern int hkdfExtract(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, uint8_t prk[USHAMaxHashSize]); extern int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], int prk_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len); /* * HKDF HMAC-based Extract-and-Expand Key Derivation Function, * RFC 5869, for all SHAs. * This interface allows any length of text input to be used. */ extern int hkdfReset(HKDFContext *context, enum SHAversion whichSha, const unsigned char *salt, int salt_len); extern int hkdfInput(HKDFContext *context, const unsigned char *ikm, int ikm_len); extern int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, unsigned int ikm_bit_count); extern int hkdfResult(HKDFContext *context, uint8_t prk[USHAMaxHashSize], const unsigned char *info, int info_len, uint8_t okm[USHAMaxHashSize], int okm_len); #endif /* _SHA_H_ */ D. Eastlake 3rd, T. Hansen [Page 28] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 8.1.2 sha-private.h /************************ sha-private.h ************************/ /***************** See RFC NNNN for details. *******************/ #ifndef _SHA_PRIVATE__H #define _SHA_PRIVATE__H /* * These definitions are defined in FIPS-180-2, section 4.1. * Ch() and Maj() are defined identically in sections 4.1.1, * 4.1.2 and 4.1.3. * * The definitions used in FIPS-180-2 are as follows: */ #ifndef USE_MODIFIED_MACROS #define SHA_Ch(x,y,z) (((x) & (y)) ^ ((~(x)) & (z))) #define SHA_Maj(x,y,z) (((x) & (y)) ^ ((x) & (z)) ^ ((y) & (z))) #else /* USE_MODIFIED_MACROS */ /* * The following definitions are equivalent and potentially faster. */ #define SHA_Ch(x, y, z) (((x) & ((y) ^ (z))) ^ (z)) #define SHA_Maj(x, y, z) (((x) & ((y) | (z))) | ((y) & (z))) #endif /* USE_MODIFIED_MACROS */ #define SHA_Parity(x, y, z) ((x) ^ (y) ^ (z)) #endif /* _SHA_PRIVATE__H */ 8.2 The SHA Code This code is primarily intended as expository and could be optimized further. For example, the assignment rotations through the variables a, b, ..., h could be treated as a cycle and the loop unrolled, rather than doing the explicit copying. Note that there are alternative representations of the Ch() and Maj() functions controlled by an ifdef. 8.2.1 sha1.c /**************************** sha1.c ***************************/ /***************** See RFC NNNN for details. *******************/ D. Eastlake 3rd, T. Hansen [Page 29] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements the Secure Hash Algorithm SHA-1 * as defined in the National Institute of Standards * and Technology Federal Information Processing Standards * Publication (FIPS PUB) 180-1 published on April 17, 1995, 180-2 * published on August 1, 2002, and the FIPS PUB 180-2 Change * Notice published on February 28, 2004. * * A combined document showing all algorithms is available at * http://csrc.nist.gov/publications/fips/ * fips180-2/fips180-2withchangenotice.pdf * * The SHA-1 algorithm produces a 160-bit message digest for a * given data stream. It should take about 2**n steps to find a * message with the same digest as a given message and * 2**(n/2) to find any two messages with the same digest, * when n is the digest size in bits. Therefore, this * algorithm can serve as a means of providing a * "fingerprint" for a message. * * Portability Issues: * SHA-1 is defined in terms of 32-bit "words". This code * uses (included via "sha.h") to define 32 and 8 * bit unsigned integer types. If your C compiler does not * support 32 bit unsigned integers, this code is not * appropriate. * * Caveats: * SHA-1 is designed to work with messages less than 2^64 bits * long. This implementation uses SHA1Input() to hash the bits * that are a multiple of the size of an 8-bit octet, and then * optionally uses SHA1FinalBits() to hash the final few bits of * the input. */ #include "sha.h" #include "sha-private.h" /* * Define the SHA1 circular left shift macro */ #define SHA1_ROTL(bits,word) \ (((word) << (bits)) | ((word) >> (32-(bits)))) /* D. Eastlake 3rd, T. Hansen [Page 30] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Add "length" to the length. * Set Corrupted when overflow has occurred. */ static uint32_t addTemp; #define SHA1AddLength(context, length) \ (addTemp = (context)->Length_Low, \ (context)->Corrupted = \ (((context)->Length_Low += (length)) < addTemp) && \ (++(context)->Length_High == 0) ? shaInputTooLong \ : shaSuccess ) /* Local Function Prototypes */ static void SHA1Finalize(SHA1Context *context, uint8_t Pad_Byte); static void SHA1PadMessage(SHA1Context *context, uint8_t Pad_Byte); static void SHA1ProcessMessageBlock(SHA1Context *context); /* * SHA1Reset * * Description: * This function will initialize the SHA1Context in preparation * for computing a new SHA1 message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * sha Error Code. * */ int SHA1Reset(SHA1Context *context) { if (!context) return shaNull; context->Length_Low = 0; context->Length_High = 0; context->Message_Block_Index = 0; /* Initial Hash Values: FIPS-180-2 section 5.3.1 */ context->Intermediate_Hash[0] = 0x67452301; context->Intermediate_Hash[1] = 0xEFCDAB89; context->Intermediate_Hash[2] = 0x98BADCFE; context->Intermediate_Hash[3] = 0x10325476; context->Intermediate_Hash[4] = 0xC3D2E1F0; context->Computed = 0; context->Corrupted = 0; D. Eastlake 3rd, T. Hansen [Page 31] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF return shaSuccess; } /* * SHA1Input * * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] * The length of the message in message_array * * Returns: * sha Error Code. * */ int SHA1Input(SHA1Context *context, const uint8_t *message_array, unsigned length) { if (!length) return shaSuccess; if (!context || !message_array) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if (context->Corrupted) return context->Corrupted; while (length-- && !context->Corrupted) { context->Message_Block[context->Message_Block_Index++] = (*message_array & 0xFF); if ((SHA1AddLength(context, 8) == shaSuccess) && (context->Message_Block_Index == SHA1_Message_Block_Size)) SHA1ProcessMessageBlock(context); message_array++; } return context->Corrupted; } /* D. Eastlake 3rd, T. Hansen [Page 32] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * SHA1FinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. */ int SHA1FinalBits(SHA1Context *context, uint8_t message_bits, unsigned int length) { uint8_t masks[8] = { /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE }; uint8_t markbit[8] = { /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 }; if (!length) return shaSuccess; if (!context) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if ((length >= 8) || (length == 0)) return context->Corrupted = shaBadParam; if (context->Corrupted) return context->Corrupted; SHA1AddLength(context, length); SHA1Finalize(context, D. Eastlake 3rd, T. Hansen [Page 33] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF (uint8_t) ((message_bits & masks[length]) | markbit[length])); return context->Corrupted; } /* * SHA1Result * * Description: * This function will return the 160-bit message digest * into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 19. * * Parameters: * context: [in/out] * The context to use to calculate the SHA-1 hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. * */ int SHA1Result(SHA1Context *context, uint8_t Message_Digest[SHA1HashSize]) { int i; if (!context || !Message_Digest) return shaNull; if (context->Corrupted) return context->Corrupted; if (!context->Computed) SHA1Finalize(context, 0x80); for (i = 0; i < SHA1HashSize; ++i) Message_Digest[i] = (uint8_t) (context->Intermediate_Hash[i>>2] >> 8 * ( 3 - ( i & 0x03 ) )); return shaSuccess; } /* * SHA1Finalize * * Description: D. Eastlake 3rd, T. Hansen [Page 34] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * This helper function finishes off the digest calculations. * * Parameters: * context: [in/out] * The SHA context to update * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * sha Error Code. * */ static void SHA1Finalize(SHA1Context *context, uint8_t Pad_Byte) { int i; SHA1PadMessage(context, Pad_Byte); /* message may be sensitive, clear it out */ for (i = 0; i < SHA1_Message_Block_Size; ++i) context->Message_Block[i] = 0; context->Length_Low = 0; /* and clear length */ context->Length_High = 0; context->Computed = 1; } /* * SHA1PadMessage * * Description: * According to the standard, the message must be padded to the next * even multiple of 512 bits. The first padding bit must be a '1'. * The last 64 bits represent the length of the original message. * All bits in between should be 0. This helper function will pad * the message according to those rules by filling the Message_Block * array accordingly. When it returns, it can be assumed that the * message digest has been computed. * * Parameters: * context: [in/out] * The context to pad * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * Nothing. D. Eastlake 3rd, T. Hansen [Page 35] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF */ static void SHA1PadMessage(SHA1Context *context, uint8_t Pad_Byte) { /* * Check to see if the current message block is too small to hold * the initial padding bits and length. If so, we will pad the * block, process it, and then continue padding into a second * block. */ if (context->Message_Block_Index >= (SHA1_Message_Block_Size - 8)) { context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < SHA1_Message_Block_Size) context->Message_Block[context->Message_Block_Index++] = 0; SHA1ProcessMessageBlock(context); } else context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < (SHA1_Message_Block_Size - 8)) context->Message_Block[context->Message_Block_Index++] = 0; /* * Store the message length as the last 8 octets */ context->Message_Block[56] = (uint8_t) (context->Length_High >> 24); context->Message_Block[57] = (uint8_t) (context->Length_High >> 16); context->Message_Block[58] = (uint8_t) (context->Length_High >> 8); context->Message_Block[59] = (uint8_t) (context->Length_High); context->Message_Block[60] = (uint8_t) (context->Length_Low >> 24); context->Message_Block[61] = (uint8_t) (context->Length_Low >> 16); context->Message_Block[62] = (uint8_t) (context->Length_Low >> 8); context->Message_Block[63] = (uint8_t) (context->Length_Low); SHA1ProcessMessageBlock(context); } /* * SHA1ProcessMessageBlock * * Description: * This helper function will process the next 512 bits of the * message stored in the Message_Block array. * * Parameters: * context: [in/out] * The SHA context to update * * Returns: * Nothing. * D. Eastlake 3rd, T. Hansen [Page 36] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Comments: * Many of the variable names in this code, especially the * single character names, were used because those were the * names used in the publication. */ static void SHA1ProcessMessageBlock(SHA1Context *context) { /* Constants defined in FIPS-180-2, section 4.2.1 */ const uint32_t K[4] = { 0x5A827999, 0x6ED9EBA1, 0x8F1BBCDC, 0xCA62C1D6 }; int t; /* Loop counter */ uint32_t temp; /* Temporary word value */ uint32_t W[80]; /* Word sequence */ uint32_t A, B, C, D, E; /* Word buffers */ /* * Initialize the first 16 words in the array W */ for (t = 0; t < 16; t++) { W[t] = ((uint32_t)context->Message_Block[t * 4]) << 24; W[t] |= ((uint32_t)context->Message_Block[t * 4 + 1]) << 16; W[t] |= ((uint32_t)context->Message_Block[t * 4 + 2]) << 8; W[t] |= ((uint32_t)context->Message_Block[t * 4 + 3]); } for (t = 16; t < 80; t++) W[t] = SHA1_ROTL(1, W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16]); A = context->Intermediate_Hash[0]; B = context->Intermediate_Hash[1]; C = context->Intermediate_Hash[2]; D = context->Intermediate_Hash[3]; E = context->Intermediate_Hash[4]; for (t = 0; t < 20; t++) { temp = SHA1_ROTL(5,A) + SHA_Ch(B, C, D) + E + W[t] + K[0]; E = D; D = C; C = SHA1_ROTL(30,B); B = A; A = temp; } for (t = 20; t < 40; t++) { temp = SHA1_ROTL(5,A) + SHA_Parity(B, C, D) + E + W[t] + K[1]; E = D; D = C; C = SHA1_ROTL(30,B); B = A; D. Eastlake 3rd, T. Hansen [Page 37] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF A = temp; } for (t = 40; t < 60; t++) { temp = SHA1_ROTL(5,A) + SHA_Maj(B, C, D) + E + W[t] + K[2]; E = D; D = C; C = SHA1_ROTL(30,B); B = A; A = temp; } for (t = 60; t < 80; t++) { temp = SHA1_ROTL(5,A) + SHA_Parity(B, C, D) + E + W[t] + K[3]; E = D; D = C; C = SHA1_ROTL(30,B); B = A; A = temp; } context->Intermediate_Hash[0] += A; context->Intermediate_Hash[1] += B; context->Intermediate_Hash[2] += C; context->Intermediate_Hash[3] += D; context->Intermediate_Hash[4] += E; context->Message_Block_Index = 0; } 8.2.2 sha224-256.c /************************* sha224-256.c ************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements the Secure Hash Algorithms SHA-224 and * SHA-256 as defined in the National Institute of Standards * and Technology Federal Information Processing Standards * Publication (FIPS PUB) 180-2 published on August 1, 2002, and * the FIPS PUB 180-2 Change Notice published on February 28, 2004. * * A combined document showing all algorithms is available at * http://csrc.nist.gov/publications/fips/ D. Eastlake 3rd, T. Hansen [Page 38] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * fips180-2/fips180-2withchangenotice.pdf * * The SHA-224 and SHA-256 algorithms produce 224-bit and 256-bit * message digests for a given data stream. It should take about * 2**n steps to find a message with the same digest as a given * message and 2**(n/2) to find any two messages with the same * digest, when n is the digest size in bits. Therefore, this * algorithm can serve as a means of providing a * "fingerprint" for a message. * * Portability Issues: * SHA-224 and SHA-256 are defined in terms of 32-bit "words". * This code uses (included via "sha.h") to define 32 * and 8 bit unsigned integer types. If your C compiler does not * support 32 bit unsigned integers, this code is not * appropriate. * * Caveats: * SHA-224 and SHA-256 are designed to work with messages less * than 2^64 bits long. This implementation uses SHA224/256Input() * to hash the bits that are a multiple of the size of an 8-bit * octet, and then optionally uses SHA224/256FinalBits() * to hash the final few bits of the input. */ #include "sha.h" #include "sha-private.h" /* Define the SHA shift, rotate left and rotate right macro */ #define SHA256_SHR(bits,word) ((word) >> (bits)) #define SHA256_ROTL(bits,word) \ (((word) << (bits)) | ((word) >> (32-(bits)))) #define SHA256_ROTR(bits,word) \ (((word) >> (bits)) | ((word) << (32-(bits)))) /* Define the SHA SIGMA and sigma macros */ #define SHA256_SIGMA0(word) \ (SHA256_ROTR( 2,word) ^ SHA256_ROTR(13,word) ^ SHA256_ROTR(22,word)) #define SHA256_SIGMA1(word) \ (SHA256_ROTR( 6,word) ^ SHA256_ROTR(11,word) ^ SHA256_ROTR(25,word)) #define SHA256_sigma0(word) \ (SHA256_ROTR( 7,word) ^ SHA256_ROTR(18,word) ^ SHA256_SHR( 3,word)) #define SHA256_sigma1(word) \ (SHA256_ROTR(17,word) ^ SHA256_ROTR(19,word) ^ SHA256_SHR(10,word)) /* * Add "length" to the length. * Set Corrupted when overflow has occurred. */ static uint32_t addTemp; D. Eastlake 3rd, T. Hansen [Page 39] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF #define SHA224_256AddLength(context, length) \ (addTemp = (context)->Length_Low, (context)->Corrupted = \ (((context)->Length_Low += (length)) < addTemp) && \ (++(context)->Length_High == 0) ? shaInputTooLong : \ shaSuccess ) /* Local Function Prototypes */ static void SHA224_256Finalize(SHA256Context *context, uint8_t Pad_Byte); static void SHA224_256PadMessage(SHA256Context *context, uint8_t Pad_Byte); static void SHA224_256ProcessMessageBlock(SHA256Context *context); static int SHA224_256Reset(SHA256Context *context, uint32_t *H0); static int SHA224_256ResultN(SHA256Context *context, uint8_t Message_Digest[ ], int HashSize); /* Initial Hash Values: FIPS-180-2 Change Notice 1 */ static uint32_t SHA224_H0[SHA256HashSize/4] = { 0xC1059ED8, 0x367CD507, 0x3070DD17, 0xF70E5939, 0xFFC00B31, 0x68581511, 0x64F98FA7, 0xBEFA4FA4 }; /* Initial Hash Values: FIPS-180-2 section 5.3.2 */ static uint32_t SHA256_H0[SHA256HashSize/4] = { 0x6A09E667, 0xBB67AE85, 0x3C6EF372, 0xA54FF53A, 0x510E527F, 0x9B05688C, 0x1F83D9AB, 0x5BE0CD19 }; /* * SHA224Reset * * Description: * This function will initialize the SHA224Context in preparation * for computing a new SHA224 message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * sha Error Code. */ int SHA224Reset(SHA224Context *context) { return SHA224_256Reset(context, SHA224_H0); } /* * SHA224Input * D. Eastlake 3rd, T. Hansen [Page 40] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] * The length of the message in message_array * * Returns: * sha Error Code. * */ int SHA224Input(SHA224Context *context, const uint8_t *message_array, unsigned int length) { return SHA256Input(context, message_array, length); } /* * SHA224FinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. */ int SHA224FinalBits(SHA224Context *context, uint8_t message_bits, unsigned int length) { return SHA256FinalBits(context, message_bits, length); } /* * SHA224Result D. Eastlake 3rd, T. Hansen [Page 41] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * * Description: * This function will return the 224-bit message digest * into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 27. * * Parameters: * context: [in/out] * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. */ int SHA224Result(SHA224Context *context, uint8_t Message_Digest[SHA224HashSize]) { return SHA224_256ResultN(context, Message_Digest, SHA224HashSize); } /* * SHA256Reset * * Description: * This function will initialize the SHA256Context in preparation * for computing a new SHA256 message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * sha Error Code. */ int SHA256Reset(SHA256Context *context) { return SHA224_256Reset(context, SHA256_H0); } /* * SHA256Input * * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: D. Eastlake 3rd, T. Hansen [Page 42] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] * The length of the message in message_array * * Returns: * sha Error Code. */ int SHA256Input(SHA256Context *context, const uint8_t *message_array, unsigned int length) { if (!length) return shaSuccess; if (!context || !message_array) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if (context->Corrupted) return context->Corrupted; while (length-- && !context->Corrupted) { context->Message_Block[context->Message_Block_Index++] = (*message_array & 0xFF); if ((SHA224_256AddLength(context, 8) == shaSuccess) && (context->Message_Block_Index == SHA256_Message_Block_Size)) SHA224_256ProcessMessageBlock(context); message_array++; } return context->Corrupted; } /* * SHA256FinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update D. Eastlake 3rd, T. Hansen [Page 43] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. */ int SHA256FinalBits(SHA256Context *context, uint8_t message_bits, unsigned int length) { uint8_t masks[8] = { /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE }; uint8_t markbit[8] = { /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 }; if (!length) return shaSuccess; if (!context) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if ((length >= 8) || (length == 0)) return context->Corrupted = shaBadParam; if (context->Corrupted) return context->Corrupted; SHA224_256AddLength(context, length); SHA224_256Finalize(context, (uint8_t) ((message_bits & masks[length]) | markbit[length])); return context->Corrupted; } /* * SHA256Result D. Eastlake 3rd, T. Hansen [Page 44] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * * Description: * This function will return the 256-bit message digest * into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 31. * * Parameters: * context: [in/out] * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. */ int SHA256Result(SHA256Context *context, uint8_t Message_Digest[SHA256HashSize]) { return SHA224_256ResultN(context, Message_Digest, SHA256HashSize); } /* * SHA224_256Finalize * * Description: * This helper function finishes off the digest calculations. * * Parameters: * context: [in/out] * The SHA context to update * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * sha Error Code. */ static void SHA224_256Finalize(SHA256Context *context, uint8_t Pad_Byte) { int i; SHA224_256PadMessage(context, Pad_Byte); /* message may be sensitive, so clear it out */ for (i = 0; i < SHA256_Message_Block_Size; ++i) context->Message_Block[i] = 0; context->Length_Low = 0; /* and clear length */ D. Eastlake 3rd, T. Hansen [Page 45] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF context->Length_High = 0; context->Computed = 1; } /* * SHA224_256PadMessage * * Description: * According to the standard, the message must be padded to the next * even multiple of 512 bits. The first padding bit must be a '1'. * The last 64 bits represent the length of the original message. * All bits in between should be 0. This helper function will pad * the message according to those rules by filling the * Message_Block array accordingly. When it returns, it can be * assumed that the message digest has been computed. * * Parameters: * context: [in/out] * The context to pad * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * Nothing. */ static void SHA224_256PadMessage(SHA256Context *context, uint8_t Pad_Byte) { /* * Check to see if the current message block is too small to hold * the initial padding bits and length. If so, we will pad the * block, process it, and then continue padding into a second * block. */ if (context->Message_Block_Index >= (SHA256_Message_Block_Size-8)) { context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < SHA256_Message_Block_Size) context->Message_Block[context->Message_Block_Index++] = 0; SHA224_256ProcessMessageBlock(context); } else context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < (SHA256_Message_Block_Size-8)) context->Message_Block[context->Message_Block_Index++] = 0; /* * Store the message length as the last 8 octets D. Eastlake 3rd, T. Hansen [Page 46] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF */ context->Message_Block[56] = (uint8_t)(context->Length_High >> 24); context->Message_Block[57] = (uint8_t)(context->Length_High >> 16); context->Message_Block[58] = (uint8_t)(context->Length_High >> 8); context->Message_Block[59] = (uint8_t)(context->Length_High); context->Message_Block[60] = (uint8_t)(context->Length_Low >> 24); context->Message_Block[61] = (uint8_t)(context->Length_Low >> 16); context->Message_Block[62] = (uint8_t)(context->Length_Low >> 8); context->Message_Block[63] = (uint8_t)(context->Length_Low); SHA224_256ProcessMessageBlock(context); } /* * SHA224_256ProcessMessageBlock * * Description: * This helper function will process the next 512 bits of the * message stored in the Message_Block array. * * Parameters: * context: [in/out] * The SHA context to update * * Returns: * Nothing. * * Comments: * Many of the variable names in this code, especially the * single character names, were used because those were the * names used in the publication. */ static void SHA224_256ProcessMessageBlock(SHA256Context *context) { /* Constants defined in FIPS-180-2, section 4.2.2 */ static const uint32_t K[64] = { 0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5, 0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174, 0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da, 0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967, 0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85, 0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070, 0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3, 0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2 }; D. Eastlake 3rd, T. Hansen [Page 47] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF int t, t4; /* Loop counter */ uint32_t temp1, temp2; /* Temporary word value */ uint32_t W[64]; /* Word sequence */ uint32_t A, B, C, D, E, F, G, H; /* Word buffers */ /* * Initialize the first 16 words in the array W */ for (t = t4 = 0; t < 16; t++, t4 += 4) W[t] = (((uint32_t)context->Message_Block[t4]) << 24) | (((uint32_t)context->Message_Block[t4 + 1]) << 16) | (((uint32_t)context->Message_Block[t4 + 2]) << 8) | (((uint32_t)context->Message_Block[t4 + 3])); for (t = 16; t < 64; t++) W[t] = SHA256_sigma1(W[t-2]) + W[t-7] + SHA256_sigma0(W[t-15]) + W[t-16]; A = context->Intermediate_Hash[0]; B = context->Intermediate_Hash[1]; C = context->Intermediate_Hash[2]; D = context->Intermediate_Hash[3]; E = context->Intermediate_Hash[4]; F = context->Intermediate_Hash[5]; G = context->Intermediate_Hash[6]; H = context->Intermediate_Hash[7]; for (t = 0; t < 64; t++) { temp1 = H + SHA256_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; temp2 = SHA256_SIGMA0(A) + SHA_Maj(A,B,C); H = G; G = F; F = E; E = D + temp1; D = C; C = B; B = A; A = temp1 + temp2; } context->Intermediate_Hash[0] += A; context->Intermediate_Hash[1] += B; context->Intermediate_Hash[2] += C; context->Intermediate_Hash[3] += D; context->Intermediate_Hash[4] += E; context->Intermediate_Hash[5] += F; context->Intermediate_Hash[6] += G; context->Intermediate_Hash[7] += H; context->Message_Block_Index = 0; D. Eastlake 3rd, T. Hansen [Page 48] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF } /* * SHA224_256Reset * * Description: * This helper function will initialize the SHA256Context in * preparation for computing a new SHA-224 or SHA-256 message digest. * * Parameters: * context: [in/out] * The context to reset. * H0 * The initial hash value to use. * * Returns: * sha Error Code. */ static int SHA224_256Reset(SHA256Context *context, uint32_t *H0) { if (!context) return shaNull; context->Length_Low = 0; context->Length_High = 0; context->Message_Block_Index = 0; context->Intermediate_Hash[0] = H0[0]; context->Intermediate_Hash[1] = H0[1]; context->Intermediate_Hash[2] = H0[2]; context->Intermediate_Hash[3] = H0[3]; context->Intermediate_Hash[4] = H0[4]; context->Intermediate_Hash[5] = H0[5]; context->Intermediate_Hash[6] = H0[6]; context->Intermediate_Hash[7] = H0[7]; context->Computed = 0; context->Corrupted = 0; return shaSuccess; } /* * SHA224_256ResultN * * Description: * This helper function will return the 224-bit or 256-bit message * digest into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, D. Eastlake 3rd, T. Hansen [Page 49] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * the last octet of hash in the element with index 27/31. * * Parameters: * context: [in/out] * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * HashSize: [in] * The size of the hash, either 28 or 32. * * Returns: * sha Error Code. */ static int SHA224_256ResultN(SHA256Context *context, uint8_t Message_Digest[ ], int HashSize) { int i; if (!context || !Message_Digest) return shaNull; if (context->Corrupted) return context->Corrupted; if (!context->Computed) SHA224_256Finalize(context, 0x80); for (i = 0; i < HashSize; ++i) Message_Digest[i] = (uint8_t) (context->Intermediate_Hash[i>>2] >> 8 * ( 3 - ( i & 0x03 ) )); return shaSuccess; } 8.2.3 sha384-512.c /************************* sha384-512.c ************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements the Secure Hash Algorithms SHA-384 and * SHA-512 as defined in the National Institute of Standards * and Technology Federal Information Processing Standards * Publication (FIPS PUB) 180-2 published on August 1, 2002, and D. Eastlake 3rd, T. Hansen [Page 50] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * the FIPS PUB 180-2 Change Notice published on February 28, 2004. * * A combined document showing all algorithms is available at * http://csrc.nist.gov/publications/fips/ * fips180-2/fips180-2withchangenotice.pdf * * The SHA-384 and SHA-512 algorithms produce 384-bit and 512-bit * message digests for a given data stream. It should take about * 2**n steps to find a message with the same digest as a given * message and 2**(n/2) to find any two messages with the same * digest, when n is the digest size in bits. Therefore, this * algorithm can serve as a means of providing a * "fingerprint" for a message. * * Portability Issues: * SHA-384 and SHA-512 are defined in terms of 64-bit "words", * but if USE_32BIT_ONLY is #defined, this code is implemented in * terms of 32-bit "words". This code uses (included * via "sha.h") to define the 64, 32 and 8 bit unsigned integer * types. If your C compiler does not support 64 bit unsigned * integers, and you do not #define USE_32BIT_ONLY, this code is * not appropriate. * * Caveats: * SHA-384 and SHA-512 are designed to work with messages less * than 2^128 bits long. This implementation uses SHA384/512Input() * to hash the bits that are a multiple of the size of an 8-bit * octet, and then optionally uses SHA384/256FinalBits() * to hash the final few bits of the input. * */ #include "sha.h" #include "sha-private.h" #ifdef USE_32BIT_ONLY /* * Define 64-bit arithmetic in terms of 32-bit arithmetic. * Each 64-bit number is represented in a 2-word array. * All macros are defined such that the result is the last parameter. */ /* * Define shift, rotate left and rotate right functions */ #define SHA512_SHR(bits, word, ret) ( \ /* (((uint64_t)((word))) >> (bits)) */ \ (ret)[0] = (((bits) < 32) && ((bits) >= 0)) ? \ ((word)[0] >> (bits)) : 0, \ (ret)[1] = ((bits) > 32) ? ((word)[0] >> ((bits) - 32)) : \ D. Eastlake 3rd, T. Hansen [Page 51] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF ((bits) == 32) ? (word)[0] : \ ((bits) >= 0) ? \ (((word)[0] << (32 - (bits))) | \ ((word)[1] >> (bits))) : 0 ) #define SHA512_SHL(bits, word, ret) ( \ /* (((uint64_t)(word)) << (bits)) */ \ (ret)[0] = ((bits) > 32) ? ((word)[1] << ((bits) - 32)) : \ ((bits) == 32) ? (word)[1] : \ ((bits) >= 0) ? \ (((word)[0] << (bits)) | \ ((word)[1] >> (32 - (bits)))) : \ 0, \ (ret)[1] = (((bits) < 32) && ((bits) >= 0)) ? \ ((word)[1] << (bits)) : 0 ) /* * Define 64-bit OR */ #define SHA512_OR(word1, word2, ret) ( \ (ret)[0] = (word1)[0] | (word2)[0], \ (ret)[1] = (word1)[1] | (word2)[1] ) /* * Define 64-bit XOR */ #define SHA512_XOR(word1, word2, ret) ( \ (ret)[0] = (word1)[0] ^ (word2)[0], \ (ret)[1] = (word1)[1] ^ (word2)[1] ) /* * Define 64-bit AND */ #define SHA512_AND(word1, word2, ret) ( \ (ret)[0] = (word1)[0] & (word2)[0], \ (ret)[1] = (word1)[1] & (word2)[1] ) /* * Define 64-bit TILDA */ #define SHA512_TILDA(word, ret) \ ( (ret)[0] = ~(word)[0], (ret)[1] = ~(word)[1] ) /* * Define 64-bit ADD */ #define SHA512_ADD(word1, word2, ret) ( \ (ret)[1] = (word1)[1], (ret)[1] += (word2)[1], \ (ret)[0] = (word1)[0] + (word2)[0] + ((ret)[1] < (word1)[1]) ) D. Eastlake 3rd, T. Hansen [Page 52] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* * Add the 4word value in word2 to word1. */ static uint32_t ADDTO4_temp, ADDTO4_temp2; #define SHA512_ADDTO4(word1, word2) ( \ ADDTO4_temp = (word1)[3], \ (word1)[3] += (word2)[3], \ ADDTO4_temp2 = (word1)[2], \ (word1)[2] += (word2)[2] + ((word1)[3] < ADDTO4_temp), \ ADDTO4_temp = (word1)[1], \ (word1)[1] += (word2)[1] + ((word1)[2] < ADDTO4_temp2), \ (word1)[0] += (word2)[0] + ((word1)[1] < ADDTO4_temp) ) /* * Add the 2word value in word2 to word1. */ static uint32_t ADDTO2_temp; #define SHA512_ADDTO2(word1, word2) ( \ ADDTO2_temp = (word1)[1], \ (word1)[1] += (word2)[1], \ (word1)[0] += (word2)[0] + ((word1)[1] < ADDTO2_temp) ) /* * SHA rotate ((word >> bits) | (word << (64-bits))) */ static uint32_t ROTR_temp1[2], ROTR_temp2[2]; #define SHA512_ROTR(bits, word, ret) ( \ SHA512_SHR((bits), (word), ROTR_temp1), \ SHA512_SHL(64-(bits), (word), ROTR_temp2), \ SHA512_OR(ROTR_temp1, ROTR_temp2, (ret)) ) /* * Define the SHA SIGMA and sigma macros * SHA512_ROTR(28,word) ^ SHA512_ROTR(34,word) ^ SHA512_ROTR(39,word) */ static uint32_t SIGMA0_temp1[2], SIGMA0_temp2[2], SIGMA0_temp3[2], SIGMA0_temp4[2]; #define SHA512_SIGMA0(word, ret) ( \ SHA512_ROTR(28, (word), SIGMA0_temp1), \ SHA512_ROTR(34, (word), SIGMA0_temp2), \ SHA512_ROTR(39, (word), SIGMA0_temp3), \ SHA512_XOR(SIGMA0_temp2, SIGMA0_temp3, SIGMA0_temp4), \ SHA512_XOR(SIGMA0_temp1, SIGMA0_temp4, (ret)) ) /* * SHA512_ROTR(14,word) ^ SHA512_ROTR(18,word) ^ SHA512_ROTR(41,word) */ static uint32_t SIGMA1_temp1[2], SIGMA1_temp2[2], SIGMA1_temp3[2], SIGMA1_temp4[2]; #define SHA512_SIGMA1(word, ret) ( \ D. Eastlake 3rd, T. Hansen [Page 53] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF SHA512_ROTR(14, (word), SIGMA1_temp1), \ SHA512_ROTR(18, (word), SIGMA1_temp2), \ SHA512_ROTR(41, (word), SIGMA1_temp3), \ SHA512_XOR(SIGMA1_temp2, SIGMA1_temp3, SIGMA1_temp4), \ SHA512_XOR(SIGMA1_temp1, SIGMA1_temp4, (ret)) ) /* * (SHA512_ROTR( 1,word) ^ SHA512_ROTR( 8,word) ^ SHA512_SHR( 7,word)) */ static uint32_t sigma0_temp1[2], sigma0_temp2[2], sigma0_temp3[2], sigma0_temp4[2]; #define SHA512_sigma0(word, ret) ( \ SHA512_ROTR( 1, (word), sigma0_temp1), \ SHA512_ROTR( 8, (word), sigma0_temp2), \ SHA512_SHR( 7, (word), sigma0_temp3), \ SHA512_XOR(sigma0_temp2, sigma0_temp3, sigma0_temp4), \ SHA512_XOR(sigma0_temp1, sigma0_temp4, (ret)) ) /* * (SHA512_ROTR(19,word) ^ SHA512_ROTR(61,word) ^ SHA512_SHR( 6,word)) */ static uint32_t sigma1_temp1[2], sigma1_temp2[2], sigma1_temp3[2], sigma1_temp4[2]; #define SHA512_sigma1(word, ret) ( \ SHA512_ROTR(19, (word), sigma1_temp1), \ SHA512_ROTR(61, (word), sigma1_temp2), \ SHA512_SHR( 6, (word), sigma1_temp3), \ SHA512_XOR(sigma1_temp2, sigma1_temp3, sigma1_temp4), \ SHA512_XOR(sigma1_temp1, sigma1_temp4, (ret)) ) #undef SHA_Ch #undef SHA_Maj #ifndef USE_MODIFIED_MACROS /* * These definitions are the ones used in FIPS-180-2, section 4.1.3 * Ch(x,y,z) ((x & y) ^ (~x & z)) */ static uint32_t Ch_temp1[2], Ch_temp2[2], Ch_temp3[2]; #define SHA_Ch(x, y, z, ret) ( \ SHA512_AND(x, y, Ch_temp1), \ SHA512_TILDA(x, Ch_temp2), \ SHA512_AND(Ch_temp2, z, Ch_temp3), \ SHA512_XOR(Ch_temp1, Ch_temp3, (ret)) ) /* * Maj(x,y,z) (((x)&(y)) ^ ((x)&(z)) ^ ((y)&(z))) */ static uint32_t Maj_temp1[2], Maj_temp2[2], Maj_temp3[2], Maj_temp4[2]; D. Eastlake 3rd, T. Hansen [Page 54] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF #define SHA_Maj(x, y, z, ret) ( \ SHA512_AND(x, y, Maj_temp1), \ SHA512_AND(x, z, Maj_temp2), \ SHA512_AND(y, z, Maj_temp3), \ SHA512_XOR(Maj_temp2, Maj_temp3, Maj_temp4), \ SHA512_XOR(Maj_temp1, Maj_temp4, (ret)) ) #else /* !USE_MODIFIED_MACROS */ /* * These definitions are potentially faster equivalents for the ones * used in FIPS-180-2, section 4.1.3. * ((x & y) ^ (~x & z)) becomes * ((x & (y ^ z)) ^ z) */ #define SHA_Ch(x, y, z, ret) ( \ (ret)[0] = (((x)[0] & ((y)[0] ^ (z)[0])) ^ (z)[0]), \ (ret)[1] = (((x)[1] & ((y)[1] ^ (z)[1])) ^ (z)[1]) ) /* * ((x & y) ^ (x & z) ^ (y & z)) becomes * ((x & (y | z)) | (y & z)) */ #define SHA_Maj(x, y, z, ret) ( \ ret[0] = (((x)[0] & ((y)[0] | (z)[0])) | ((y)[0] & (z)[0])), \ ret[1] = (((x)[1] & ((y)[1] | (z)[1])) | ((y)[1] & (z)[1])) ) #endif /* USE_MODIFIED_MACROS */ /* * Add "length" to the length. * Set Corrupted when overflow has occurred. */ static uint32_t addTemp[4] = { 0, 0, 0, 0 }; #define SHA384_512AddLength(context, length) ( \ addTemp[3] = (length), SHA512_ADDTO4((context)->Length, addTemp), \ (context)->Corrupted = (((context)->Length[3] < (length)) && \ ((context)->Length[2] == 0) && ((context)->Length[1] == 0) && \ ((context)->Length[0] == 0)) ? shaInputTooLong : shaSuccess ) /* Local Function Prototypes */ static void SHA384_512Finalize(SHA512Context *context, uint8_t Pad_Byte); static void SHA384_512PadMessage(SHA512Context *context, uint8_t Pad_Byte); static void SHA384_512ProcessMessageBlock(SHA512Context *context); static int SHA384_512Reset(SHA512Context *context, uint32_t H0[SHA512HashSize/4]); static int SHA384_512ResultN( SHA512Context *context, uint8_t Message_Digest[ ], int HashSize); /* Initial Hash Values: FIPS-180-2 sections 5.3.3 and 5.3.4 */ D. Eastlake 3rd, T. Hansen [Page 55] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF static uint32_t SHA384_H0[SHA512HashSize/4] = { 0xCBBB9D5D, 0xC1059ED8, 0x629A292A, 0x367CD507, 0x9159015A, 0x3070DD17, 0x152FECD8, 0xF70E5939, 0x67332667, 0xFFC00B31, 0x8EB44A87, 0x68581511, 0xDB0C2E0D, 0x64F98FA7, 0x47B5481D, 0xBEFA4FA4 }; static uint32_t SHA512_H0[SHA512HashSize/4] = { 0x6A09E667, 0xF3BCC908, 0xBB67AE85, 0x84CAA73B, 0x3C6EF372, 0xFE94F82B, 0xA54FF53A, 0x5F1D36F1, 0x510E527F, 0xADE682D1, 0x9B05688C, 0x2B3E6C1F, 0x1F83D9AB, 0xFB41BD6B, 0x5BE0CD19, 0x137E2179 }; #else /* !USE_32BIT_ONLY */ /* Define the SHA shift, rotate left and rotate right macro */ #define SHA512_SHR(bits,word) (((uint64_t)(word)) >> (bits)) #define SHA512_ROTR(bits,word) ((((uint64_t)(word)) >> (bits)) | \ (((uint64_t)(word)) << (64-(bits)))) /* Define the SHA SIGMA and sigma macros */ #define SHA512_SIGMA0(word) \ (SHA512_ROTR(28,word) ^ SHA512_ROTR(34,word) ^ SHA512_ROTR(39,word)) #define SHA512_SIGMA1(word) \ (SHA512_ROTR(14,word) ^ SHA512_ROTR(18,word) ^ SHA512_ROTR(41,word)) #define SHA512_sigma0(word) \ (SHA512_ROTR( 1,word) ^ SHA512_ROTR( 8,word) ^ SHA512_SHR( 7,word)) #define SHA512_sigma1(word) \ (SHA512_ROTR(19,word) ^ SHA512_ROTR(61,word) ^ SHA512_SHR( 6,word)) /* * Add "length" to the length. * Set Corrupted when overflow has occurred. */ static uint64_t addTemp; #define SHA384_512AddLength(context, length) \ (addTemp = context->Length_Low, context->Corrupted = \ ((context->Length_Low += length) < addTemp) && \ (++context->Length_High == 0) ? 1 : 0) /* Local Function Prototypes */ static void SHA384_512Finalize(SHA512Context *context, uint8_t Pad_Byte); static void SHA384_512PadMessage(SHA512Context *context, uint8_t Pad_Byte); static void SHA384_512ProcessMessageBlock(SHA512Context *context); static int SHA384_512Reset(SHA512Context *context, uint64_t H0[SHA512HashSize/8]); static int SHA384_512ResultN(SHA512Context *context, D. Eastlake 3rd, T. Hansen [Page 56] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF uint8_t Message_Digest[ ], int HashSize); /* Initial Hash Values: FIPS-180-2 sections 5.3.3 and 5.3.4 */ static uint64_t SHA384_H0[ ] = { 0xCBBB9D5DC1059ED8ll, 0x629A292A367CD507ll, 0x9159015A3070DD17ll, 0x152FECD8F70E5939ll, 0x67332667FFC00B31ll, 0x8EB44A8768581511ll, 0xDB0C2E0D64F98FA7ll, 0x47B5481DBEFA4FA4ll }; static uint64_t SHA512_H0[ ] = { 0x6A09E667F3BCC908ll, 0xBB67AE8584CAA73Bll, 0x3C6EF372FE94F82Bll, 0xA54FF53A5F1D36F1ll, 0x510E527FADE682D1ll, 0x9B05688C2B3E6C1Fll, 0x1F83D9ABFB41BD6Bll, 0x5BE0CD19137E2179ll }; #endif /* USE_32BIT_ONLY */ /* * SHA384Reset * * Description: * This function will initialize the SHA384Context in preparation * for computing a new SHA384 message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * sha Error Code. * */ int SHA384Reset(SHA384Context *context) { return SHA384_512Reset(context, SHA384_H0); } /* * SHA384Input * * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] D. Eastlake 3rd, T. Hansen [Page 57] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * The length of the message in message_array * * Returns: * sha Error Code. * */ int SHA384Input(SHA384Context *context, const uint8_t *message_array, unsigned int length) { return SHA512Input(context, message_array, length); } /* * SHA384FinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. * */ int SHA384FinalBits(SHA384Context *context, uint8_t message_bits, unsigned int length) { return SHA512FinalBits(context, message_bits, length); } /* * SHA384Result * * Description: * This function will return the 384-bit message digest * into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 47. * * Parameters: * context: [in/out] D. Eastlake 3rd, T. Hansen [Page 58] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. * */ int SHA384Result(SHA384Context *context, uint8_t Message_Digest[SHA384HashSize]) { return SHA384_512ResultN(context, Message_Digest, SHA384HashSize); } /* * SHA512Reset * * Description: * This function will initialize the SHA512Context in preparation * for computing a new SHA512 message digest. * * Parameters: * context: [in/out] * The context to reset. * * Returns: * sha Error Code. * */ int SHA512Reset(SHA512Context *context) { return SHA384_512Reset(context, SHA512_H0); } /* * SHA512Input * * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] * The length of the message in message_array * D. Eastlake 3rd, T. Hansen [Page 59] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Returns: * sha Error Code. * */ int SHA512Input(SHA512Context *context, const uint8_t *message_array, unsigned int length) { if (!length) return shaSuccess; if (!context || !message_array) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if (context->Corrupted) return context->Corrupted; while (length-- && !context->Corrupted) { context->Message_Block[context->Message_Block_Index++] = (*message_array & 0xFF); if ((SHA384_512AddLength(context, 8) == shaSuccess) && (context->Message_Block_Index == SHA512_Message_Block_Size)) SHA384_512ProcessMessageBlock(context); message_array++; } return context->Corrupted; } /* * SHA512FinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * D. Eastlake 3rd, T. Hansen [Page 60] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * Returns: * sha Error Code. * */ int SHA512FinalBits(SHA512Context *context, uint8_t message_bits, unsigned int length) { uint8_t masks[8] = { /* 0 0b00000000 */ 0x00, /* 1 0b10000000 */ 0x80, /* 2 0b11000000 */ 0xC0, /* 3 0b11100000 */ 0xE0, /* 4 0b11110000 */ 0xF0, /* 5 0b11111000 */ 0xF8, /* 6 0b11111100 */ 0xFC, /* 7 0b11111110 */ 0xFE }; uint8_t markbit[8] = { /* 0 0b10000000 */ 0x80, /* 1 0b01000000 */ 0x40, /* 2 0b00100000 */ 0x20, /* 3 0b00010000 */ 0x10, /* 4 0b00001000 */ 0x08, /* 5 0b00000100 */ 0x04, /* 6 0b00000010 */ 0x02, /* 7 0b00000001 */ 0x01 }; if (!length) return shaSuccess; if (!context) return shaNull; if (context->Computed) return context->Corrupted = shaStateError; if ((length >= 8) || (length == 0)) return context->Corrupted = shaBadParam; if (context->Corrupted) return context->Corrupted; SHA384_512AddLength(context, length); SHA384_512Finalize(context, (uint8_t) ((message_bits & masks[length]) | markbit[length])); return context->Corrupted; } /* * SHA384_512Finalize * * Description: * This helper function finishes off the digest calculations. * * Parameters: * context: [in/out] D. Eastlake 3rd, T. Hansen [Page 61] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * The SHA context to update * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * sha Error Code. * */ static void SHA384_512Finalize(SHA512Context *context, uint8_t Pad_Byte) { int_least16_t i; SHA384_512PadMessage(context, Pad_Byte); /* message may be sensitive, clear it out */ for (i = 0; i < SHA512_Message_Block_Size; ++i) context->Message_Block[i] = 0; #ifdef USE_32BIT_ONLY /* and clear length */ context->Length[0] = context->Length[1] = 0; context->Length[2] = context->Length[3] = 0; #else /* !USE_32BIT_ONLY */ context->Length_Low = 0; context->Length_High = 0; #endif /* USE_32BIT_ONLY */ context->Computed = 1; } /* * SHA512Result * * Description: * This function will return the 512-bit message digest * into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 63. * * Parameters: * context: [in/out] * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. * */ int SHA512Result(SHA512Context *context, D. Eastlake 3rd, T. Hansen [Page 62] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF uint8_t Message_Digest[SHA512HashSize]) { return SHA384_512ResultN(context, Message_Digest, SHA512HashSize); } /* * SHA384_512PadMessage * * Description: * According to the standard, the message must be padded to the next * even multiple of 1024 bits. The first padding bit must be a '1'. * The last 128 bits represent the length of the original message. * All bits in between should be 0. This helper function will * pad the message according to those rules by filling the * Message_Block array accordingly. When it returns, it can be * assumed that the message digest has been computed. * * Parameters: * context: [in/out] * The context to pad * Pad_Byte: [in] * The last byte to add to the digest before the 0-padding * and length. This will contain the last bits of the message * followed by another single bit. If the message was an * exact multiple of 8-bits long, Pad_Byte will be 0x80. * * Returns: * Nothing. * */ static void SHA384_512PadMessage(SHA512Context *context, uint8_t Pad_Byte) { /* * Check to see if the current message block is too small to hold * the initial padding bits and length. If so, we will pad the * block, process it, and then continue padding into a second * block. */ if (context->Message_Block_Index >= (SHA512_Message_Block_Size-16)) { context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < SHA512_Message_Block_Size) context->Message_Block[context->Message_Block_Index++] = 0; SHA384_512ProcessMessageBlock(context); } else context->Message_Block[context->Message_Block_Index++] = Pad_Byte; while (context->Message_Block_Index < (SHA512_Message_Block_Size-16)) context->Message_Block[context->Message_Block_Index++] = 0; D. Eastlake 3rd, T. Hansen [Page 63] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* * Store the message length as the last 16 octets */ #ifdef USE_32BIT_ONLY context->Message_Block[112] = (uint8_t)(context->Length[0] >> 24); context->Message_Block[113] = (uint8_t)(context->Length[0] >> 16); context->Message_Block[114] = (uint8_t)(context->Length[0] >> 8); context->Message_Block[115] = (uint8_t)(context->Length[0]); context->Message_Block[116] = (uint8_t)(context->Length[1] >> 24); context->Message_Block[117] = (uint8_t)(context->Length[1] >> 16); context->Message_Block[118] = (uint8_t)(context->Length[1] >> 8); context->Message_Block[119] = (uint8_t)(context->Length[1]); context->Message_Block[120] = (uint8_t)(context->Length[2] >> 24); context->Message_Block[121] = (uint8_t)(context->Length[2] >> 16); context->Message_Block[122] = (uint8_t)(context->Length[2] >> 8); context->Message_Block[123] = (uint8_t)(context->Length[2]); context->Message_Block[124] = (uint8_t)(context->Length[3] >> 24); context->Message_Block[125] = (uint8_t)(context->Length[3] >> 16); context->Message_Block[126] = (uint8_t)(context->Length[3] >> 8); context->Message_Block[127] = (uint8_t)(context->Length[3]); #else /* !USE_32BIT_ONLY */ context->Message_Block[112] = (uint8_t)(context->Length_High >> 56); context->Message_Block[113] = (uint8_t)(context->Length_High >> 48); context->Message_Block[114] = (uint8_t)(context->Length_High >> 40); context->Message_Block[115] = (uint8_t)(context->Length_High >> 32); context->Message_Block[116] = (uint8_t)(context->Length_High >> 24); context->Message_Block[117] = (uint8_t)(context->Length_High >> 16); context->Message_Block[118] = (uint8_t)(context->Length_High >> 8); context->Message_Block[119] = (uint8_t)(context->Length_High); context->Message_Block[120] = (uint8_t)(context->Length_Low >> 56); context->Message_Block[121] = (uint8_t)(context->Length_Low >> 48); context->Message_Block[122] = (uint8_t)(context->Length_Low >> 40); context->Message_Block[123] = (uint8_t)(context->Length_Low >> 32); context->Message_Block[124] = (uint8_t)(context->Length_Low >> 24); context->Message_Block[125] = (uint8_t)(context->Length_Low >> 16); context->Message_Block[126] = (uint8_t)(context->Length_Low >> 8); context->Message_Block[127] = (uint8_t)(context->Length_Low); #endif /* USE_32BIT_ONLY */ SHA384_512ProcessMessageBlock(context); } /* * SHA384_512ProcessMessageBlock * * Description: * This helper function will process the next 1024 bits of the * message stored in the Message_Block array. D. Eastlake 3rd, T. Hansen [Page 64] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * * Parameters: * context: [in/out] * The SHA context to update * * Returns: * Nothing. * * Comments: * Many of the variable names in this code, especially the * single character names, were used because those were the * names used in the publication. * * */ static void SHA384_512ProcessMessageBlock(SHA512Context *context) { /* Constants defined in FIPS-180-2, section 4.2.3 */ #ifdef USE_32BIT_ONLY static const uint32_t K[80*2] = { 0x428A2F98, 0xD728AE22, 0x71374491, 0x23EF65CD, 0xB5C0FBCF, 0xEC4D3B2F, 0xE9B5DBA5, 0x8189DBBC, 0x3956C25B, 0xF348B538, 0x59F111F1, 0xB605D019, 0x923F82A4, 0xAF194F9B, 0xAB1C5ED5, 0xDA6D8118, 0xD807AA98, 0xA3030242, 0x12835B01, 0x45706FBE, 0x243185BE, 0x4EE4B28C, 0x550C7DC3, 0xD5FFB4E2, 0x72BE5D74, 0xF27B896F, 0x80DEB1FE, 0x3B1696B1, 0x9BDC06A7, 0x25C71235, 0xC19BF174, 0xCF692694, 0xE49B69C1, 0x9EF14AD2, 0xEFBE4786, 0x384F25E3, 0x0FC19DC6, 0x8B8CD5B5, 0x240CA1CC, 0x77AC9C65, 0x2DE92C6F, 0x592B0275, 0x4A7484AA, 0x6EA6E483, 0x5CB0A9DC, 0xBD41FBD4, 0x76F988DA, 0x831153B5, 0x983E5152, 0xEE66DFAB, 0xA831C66D, 0x2DB43210, 0xB00327C8, 0x98FB213F, 0xBF597FC7, 0xBEEF0EE4, 0xC6E00BF3, 0x3DA88FC2, 0xD5A79147, 0x930AA725, 0x06CA6351, 0xE003826F, 0x14292967, 0x0A0E6E70, 0x27B70A85, 0x46D22FFC, 0x2E1B2138, 0x5C26C926, 0x4D2C6DFC, 0x5AC42AED, 0x53380D13, 0x9D95B3DF, 0x650A7354, 0x8BAF63DE, 0x766A0ABB, 0x3C77B2A8, 0x81C2C92E, 0x47EDAEE6, 0x92722C85, 0x1482353B, 0xA2BFE8A1, 0x4CF10364, 0xA81A664B, 0xBC423001, 0xC24B8B70, 0xD0F89791, 0xC76C51A3, 0x0654BE30, 0xD192E819, 0xD6EF5218, 0xD6990624, 0x5565A910, 0xF40E3585, 0x5771202A, 0x106AA070, 0x32BBD1B8, 0x19A4C116, 0xB8D2D0C8, 0x1E376C08, 0x5141AB53, 0x2748774C, 0xDF8EEB99, 0x34B0BCB5, 0xE19B48A8, 0x391C0CB3, 0xC5C95A63, 0x4ED8AA4A, 0xE3418ACB, 0x5B9CCA4F, 0x7763E373, 0x682E6FF3, 0xD6B2B8A3, 0x748F82EE, 0x5DEFB2FC, 0x78A5636F, 0x43172F60, 0x84C87814, 0xA1F0AB72, 0x8CC70208, 0x1A6439EC, 0x90BEFFFA, 0x23631E28, 0xA4506CEB, 0xDE82BDE9, 0xBEF9A3F7, 0xB2C67915, 0xC67178F2, 0xE372532B, 0xCA273ECE, 0xEA26619C, 0xD186B8C7, 0x21C0C207, 0xEADA7DD6, 0xCDE0EB1E, 0xF57D4F7F, 0xEE6ED178, 0x06F067AA, 0x72176FBA, 0x0A637DC5, 0xA2C898A6, 0x113F9804, 0xBEF90DAE, 0x1B710B35, 0x131C471B, 0x28DB77F5, 0x23047D84, 0x32CAAB7B, 0x40C72493, 0x3C9EBE0A, 0x15C9BEBC, D. Eastlake 3rd, T. Hansen [Page 65] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 0x431D67C4, 0x9C100D4C, 0x4CC5D4BE, 0xCB3E42B6, 0x597F299C, 0xFC657E2A, 0x5FCB6FAB, 0x3AD6FAEC, 0x6C44198C, 0x4A475817 }; int t, t2, t8; /* Loop counter */ uint32_t temp1[2], temp2[2], /* Temporary word values */ temp3[2], temp4[2], temp5[2]; uint32_t W[2*80]; /* Word sequence */ uint32_t A[2], B[2], C[2], D[2], /* Word buffers */ E[2], F[2], G[2], H[2]; /* Initialize the first 16 words in the array W */ for (t = t2 = t8 = 0; t < 16; t++, t8 += 8) { W[t2++] = ((((uint32_t)context->Message_Block[t8 ])) << 24) | ((((uint32_t)context->Message_Block[t8 + 1])) << 16) | ((((uint32_t)context->Message_Block[t8 + 2])) << 8) | ((((uint32_t)context->Message_Block[t8 + 3]))); W[t2++] = ((((uint32_t)context->Message_Block[t8 + 4])) << 24) | ((((uint32_t)context->Message_Block[t8 + 5])) << 16) | ((((uint32_t)context->Message_Block[t8 + 6])) << 8) | ((((uint32_t)context->Message_Block[t8 + 7]))); } for (t = 16; t < 80; t++, t2 += 2) { /* W[t] = SHA512_sigma1(W[t-2]) + W[t-7] + SHA512_sigma0(W[t-15]) + W[t-16]; */ uint32_t *Wt2 = &W[t2-2*2]; uint32_t *Wt7 = &W[t2-7*2]; uint32_t *Wt15 = &W[t2-15*2]; uint32_t *Wt16 = &W[t2-16*2]; SHA512_sigma1(Wt2, temp1); SHA512_ADD(temp1, Wt7, temp2); SHA512_sigma0(Wt15, temp1); SHA512_ADD(temp1, Wt16, temp3); SHA512_ADD(temp2, temp3, &W[t2]); } A[0] = context->Intermediate_Hash[0]; A[1] = context->Intermediate_Hash[1]; B[0] = context->Intermediate_Hash[2]; B[1] = context->Intermediate_Hash[3]; C[0] = context->Intermediate_Hash[4]; C[1] = context->Intermediate_Hash[5]; D[0] = context->Intermediate_Hash[6]; D[1] = context->Intermediate_Hash[7]; E[0] = context->Intermediate_Hash[8]; E[1] = context->Intermediate_Hash[9]; F[0] = context->Intermediate_Hash[10]; F[1] = context->Intermediate_Hash[11]; G[0] = context->Intermediate_Hash[12]; G[1] = context->Intermediate_Hash[13]; D. Eastlake 3rd, T. Hansen [Page 66] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF H[0] = context->Intermediate_Hash[14]; H[1] = context->Intermediate_Hash[15]; for (t = t2 = 0; t < 80; t++, t2 += 2) { /* * temp1 = H + SHA512_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; */ SHA512_SIGMA1(E,temp1); SHA512_ADD(H, temp1, temp2); SHA_Ch(E,F,G,temp3); SHA512_ADD(temp2, temp3, temp4); SHA512_ADD(&K[t2], &W[t2], temp5); SHA512_ADD(temp4, temp5, temp1); /* * temp2 = SHA512_SIGMA0(A) + SHA_Maj(A,B,C); */ SHA512_SIGMA0(A,temp3); SHA_Maj(A,B,C,temp4); SHA512_ADD(temp3, temp4, temp2); H[0] = G[0]; H[1] = G[1]; G[0] = F[0]; G[1] = F[1]; F[0] = E[0]; F[1] = E[1]; SHA512_ADD(D, temp1, E); D[0] = C[0]; D[1] = C[1]; C[0] = B[0]; C[1] = B[1]; B[0] = A[0]; B[1] = A[1]; SHA512_ADD(temp1, temp2, A); } SHA512_ADDTO2(&context->Intermediate_Hash[0], A); SHA512_ADDTO2(&context->Intermediate_Hash[2], B); SHA512_ADDTO2(&context->Intermediate_Hash[4], C); SHA512_ADDTO2(&context->Intermediate_Hash[6], D); SHA512_ADDTO2(&context->Intermediate_Hash[8], E); SHA512_ADDTO2(&context->Intermediate_Hash[10], F); SHA512_ADDTO2(&context->Intermediate_Hash[12], G); SHA512_ADDTO2(&context->Intermediate_Hash[14], H); #else /* !USE_32BIT_ONLY */ static const uint64_t K[80] = { 0x428A2F98D728AE22ll, 0x7137449123EF65CDll, 0xB5C0FBCFEC4D3B2Fll, 0xE9B5DBA58189DBBCll, 0x3956C25BF348B538ll, 0x59F111F1B605D019ll, 0x923F82A4AF194F9Bll, 0xAB1C5ED5DA6D8118ll, 0xD807AA98A3030242ll, 0x12835B0145706FBEll, 0x243185BE4EE4B28Cll, 0x550C7DC3D5FFB4E2ll, 0x72BE5D74F27B896Fll, 0x80DEB1FE3B1696B1ll, 0x9BDC06A725C71235ll, 0xC19BF174CF692694ll, 0xE49B69C19EF14AD2ll, 0xEFBE4786384F25E3ll, 0x0FC19DC68B8CD5B5ll, 0x240CA1CC77AC9C65ll, 0x2DE92C6F592B0275ll, 0x4A7484AA6EA6E483ll, 0x5CB0A9DCBD41FBD4ll, 0x76F988DA831153B5ll, 0x983E5152EE66DFABll, 0xA831C66D2DB43210ll, 0xB00327C898FB213Fll, 0xBF597FC7BEEF0EE4ll, 0xC6E00BF33DA88FC2ll, 0xD5A79147930AA725ll, D. Eastlake 3rd, T. Hansen [Page 67] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 0x06CA6351E003826Fll, 0x142929670A0E6E70ll, 0x27B70A8546D22FFCll, 0x2E1B21385C26C926ll, 0x4D2C6DFC5AC42AEDll, 0x53380D139D95B3DFll, 0x650A73548BAF63DEll, 0x766A0ABB3C77B2A8ll, 0x81C2C92E47EDAEE6ll, 0x92722C851482353Bll, 0xA2BFE8A14CF10364ll, 0xA81A664BBC423001ll, 0xC24B8B70D0F89791ll, 0xC76C51A30654BE30ll, 0xD192E819D6EF5218ll, 0xD69906245565A910ll, 0xF40E35855771202All, 0x106AA07032BBD1B8ll, 0x19A4C116B8D2D0C8ll, 0x1E376C085141AB53ll, 0x2748774CDF8EEB99ll, 0x34B0BCB5E19B48A8ll, 0x391C0CB3C5C95A63ll, 0x4ED8AA4AE3418ACBll, 0x5B9CCA4F7763E373ll, 0x682E6FF3D6B2B8A3ll, 0x748F82EE5DEFB2FCll, 0x78A5636F43172F60ll, 0x84C87814A1F0AB72ll, 0x8CC702081A6439ECll, 0x90BEFFFA23631E28ll, 0xA4506CEBDE82BDE9ll, 0xBEF9A3F7B2C67915ll, 0xC67178F2E372532Bll, 0xCA273ECEEA26619Cll, 0xD186B8C721C0C207ll, 0xEADA7DD6CDE0EB1Ell, 0xF57D4F7FEE6ED178ll, 0x06F067AA72176FBAll, 0x0A637DC5A2C898A6ll, 0x113F9804BEF90DAEll, 0x1B710B35131C471Bll, 0x28DB77F523047D84ll, 0x32CAAB7B40C72493ll, 0x3C9EBE0A15C9BEBCll, 0x431D67C49C100D4Cll, 0x4CC5D4BECB3E42B6ll, 0x597F299CFC657E2All, 0x5FCB6FAB3AD6FAECll, 0x6C44198C4A475817ll }; int t, t8; /* Loop counter */ uint64_t temp1, temp2; /* Temporary word value */ uint64_t W[80]; /* Word sequence */ uint64_t A, B, C, D, E, F, G, H; /* Word buffers */ /* * Initialize the first 16 words in the array W */ for (t = t8 = 0; t < 16; t++, t8 += 8) W[t] = ((uint64_t)(context->Message_Block[t8 ]) << 56) | ((uint64_t)(context->Message_Block[t8 + 1]) << 48) | ((uint64_t)(context->Message_Block[t8 + 2]) << 40) | ((uint64_t)(context->Message_Block[t8 + 3]) << 32) | ((uint64_t)(context->Message_Block[t8 + 4]) << 24) | ((uint64_t)(context->Message_Block[t8 + 5]) << 16) | ((uint64_t)(context->Message_Block[t8 + 6]) << 8) | ((uint64_t)(context->Message_Block[t8 + 7])); for (t = 16; t < 80; t++) W[t] = SHA512_sigma1(W[t-2]) + W[t-7] + SHA512_sigma0(W[t-15]) + W[t-16]; A = context->Intermediate_Hash[0]; B = context->Intermediate_Hash[1]; C = context->Intermediate_Hash[2]; D = context->Intermediate_Hash[3]; E = context->Intermediate_Hash[4]; F = context->Intermediate_Hash[5]; G = context->Intermediate_Hash[6]; H = context->Intermediate_Hash[7]; for (t = 0; t < 80; t++) { D. Eastlake 3rd, T. Hansen [Page 68] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF temp1 = H + SHA512_SIGMA1(E) + SHA_Ch(E,F,G) + K[t] + W[t]; temp2 = SHA512_SIGMA0(A) + SHA_Maj(A,B,C); H = G; G = F; F = E; E = D + temp1; D = C; C = B; B = A; A = temp1 + temp2; } context->Intermediate_Hash[0] += A; context->Intermediate_Hash[1] += B; context->Intermediate_Hash[2] += C; context->Intermediate_Hash[3] += D; context->Intermediate_Hash[4] += E; context->Intermediate_Hash[5] += F; context->Intermediate_Hash[6] += G; context->Intermediate_Hash[7] += H; #endif /* USE_32BIT_ONLY */ context->Message_Block_Index = 0; } /* * SHA384_512Reset * * Description: * This helper function will initialize the SHA512Context in * preparation for computing a new SHA384 or SHA512 message * digest. * * Parameters: * context: [in/out] * The context to reset. * H0 * The initial hash value to use. * * Returns: * sha Error Code. * */ #ifdef USE_32BIT_ONLY static int SHA384_512Reset(SHA512Context *context, uint32_t H0[SHA512HashSize/4]) #else /* !USE_32BIT_ONLY */ static int SHA384_512Reset(SHA512Context *context, uint64_t H0[SHA512HashSize/8]) #endif /* USE_32BIT_ONLY */ D. Eastlake 3rd, T. Hansen [Page 69] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF { int i; if (!context) return shaNull; context->Message_Block_Index = 0; #ifdef USE_32BIT_ONLY context->Length[0] = context->Length[1] = context->Length[2] = context->Length[3] = 0; for (i = 0; i < SHA512HashSize/4; i++) context->Intermediate_Hash[i] = H0[i]; #else /* !USE_32BIT_ONLY */ context->Length_High = context->Length_Low = 0; for (i = 0; i < SHA512HashSize/8; i++) context->Intermediate_Hash[i] = H0[i]; #endif /* USE_32BIT_ONLY */ context->Computed = 0; context->Corrupted = 0; return shaSuccess; } /* * SHA384_512ResultN * * Description: * This helper function will return the 384-bit or 512-bit message * digest into the Message_Digest array provided by the caller. * NOTE: * The first octet of hash is stored in the element with index 0, * the last octet of hash in the element with index 47/63. * * Parameters: * context: [in/out] * The context to use to calculate the SHA hash. * Message_Digest: [out] * Where the digest is returned. * HashSize: [in] * The size of the hash, either 48 or 64. * * Returns: * sha Error Code. * */ static int SHA384_512ResultN(SHA512Context *context, uint8_t Message_Digest[ ], int HashSize) D. Eastlake 3rd, T. Hansen [Page 70] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF { int i; #ifdef USE_32BIT_ONLY int i2; #endif /* USE_32BIT_ONLY */ if (!context || !Message_Digest) return shaNull; if (context->Corrupted) return context->Corrupted; if (!context->Computed) SHA384_512Finalize(context, 0x80); #ifdef USE_32BIT_ONLY for (i = i2 = 0; i < HashSize; ) { Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>24); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>16); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>8); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2++]); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>24); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>16); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2]>>8); Message_Digest[i++]=(uint8_t)(context->Intermediate_Hash[i2++]); } #else /* !USE_32BIT_ONLY */ for (i = 0; i < HashSize; ++i) Message_Digest[i] = (uint8_t) (context->Intermediate_Hash[i>>3] >> 8 * ( 7 - ( i % 8 ) )); #endif /* USE_32BIT_ONLY */ return shaSuccess; } 8.2.4 usha.c /**************************** usha.c ***************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements a unified interface to the SHA algorithms. */ D. Eastlake 3rd, T. Hansen [Page 71] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF #include "sha.h" /* * USHAReset * * Description: * This function will initialize the SHA Context in preparation * for computing a new SHA message digest. * * Parameters: * context: [in/out] * The context to reset. * whichSha: [in] * Selects which SHA reset to call * * Returns: * sha Error Code. * */ int USHAReset(USHAContext *context, enum SHAversion whichSha) { if (context) { context->whichSha = whichSha; switch (whichSha) { case SHA1: return SHA1Reset((SHA1Context*)&context->ctx); case SHA224: return SHA224Reset((SHA224Context*)&context->ctx); case SHA256: return SHA256Reset((SHA256Context*)&context->ctx); case SHA384: return SHA384Reset((SHA384Context*)&context->ctx); case SHA512: return SHA512Reset((SHA512Context*)&context->ctx); default: return shaBadParam; } } else { return shaNull; } } /* * USHAInput * * Description: * This function accepts an array of octets as the next portion * of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] D. Eastlake 3rd, T. Hansen [Page 72] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * The length of the message in message_array * * Returns: * sha Error Code. * */ int USHAInput(USHAContext *context, const uint8_t *bytes, unsigned int bytecount) { if (context) { switch (context->whichSha) { case SHA1: return SHA1Input((SHA1Context*)&context->ctx, bytes, bytecount); case SHA224: return SHA224Input((SHA224Context*)&context->ctx, bytes, bytecount); case SHA256: return SHA256Input((SHA256Context*)&context->ctx, bytes, bytecount); case SHA384: return SHA384Input((SHA384Context*)&context->ctx, bytes, bytecount); case SHA512: return SHA512Input((SHA512Context*)&context->ctx, bytes, bytecount); default: return shaBadParam; } } else { return shaNull; } } /* * USHAFinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The SHA context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: D. Eastlake 3rd, T. Hansen [Page 73] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * sha Error Code. */ int USHAFinalBits(USHAContext *context, uint8_t bits, unsigned int bit_count) { if (context) { switch (context->whichSha) { case SHA1: return SHA1FinalBits((SHA1Context*)&context->ctx, bits, bit_count); case SHA224: return SHA224FinalBits((SHA224Context*)&context->ctx, bits, bit_count); case SHA256: return SHA256FinalBits((SHA256Context*)&context->ctx, bits, bit_count); case SHA384: return SHA384FinalBits((SHA384Context*)&context->ctx, bits, bit_count); case SHA512: return SHA512FinalBits((SHA512Context*)&context->ctx, bits, bit_count); default: return shaBadParam; } } else { return shaNull; } } /* * USHAResult * * Description: * This function will return the message digest of the appropriate * bit size, as returned by USHAHashSizeBits(whichSHA) for the * 'whichSHA' value used in the preceeding call to USHAReset, * into the Message_Digest array provided by the caller. * * Parameters: * context: [in/out] * The context to use to calculate the SHA-1 hash. * Message_Digest: [out] * Where the digest is returned. * * Returns: * sha Error Code. * */ int USHAResult(USHAContext *context, uint8_t Message_Digest[USHAMaxHashSize]) D. Eastlake 3rd, T. Hansen [Page 74] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF { if (context) { switch (context->whichSha) { case SHA1: return SHA1Result((SHA1Context*)&context->ctx, Message_Digest); case SHA224: return SHA224Result((SHA224Context*)&context->ctx, Message_Digest); case SHA256: return SHA256Result((SHA256Context*)&context->ctx, Message_Digest); case SHA384: return SHA384Result((SHA384Context*)&context->ctx, Message_Digest); case SHA512: return SHA512Result((SHA512Context*)&context->ctx, Message_Digest); default: return shaBadParam; } } else { return shaNull; } } /* * USHABlockSize * * Description: * This function will return the blocksize for the given SHA * algorithm. * * Parameters: * whichSha: * which SHA algorithm to query * * Returns: * block size * */ int USHABlockSize(enum SHAversion whichSha) { switch (whichSha) { case SHA1: return SHA1_Message_Block_Size; case SHA224: return SHA224_Message_Block_Size; case SHA256: return SHA256_Message_Block_Size; case SHA384: return SHA384_Message_Block_Size; default: case SHA512: return SHA512_Message_Block_Size; } } D. Eastlake 3rd, T. Hansen [Page 75] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* * USHAHashSize * * Description: * This function will return the hashsize for the given SHA * algorithm. * * Parameters: * whichSha: * which SHA algorithm to query * * Returns: * hash size * */ int USHAHashSize(enum SHAversion whichSha) { switch (whichSha) { case SHA1: return SHA1HashSize; case SHA224: return SHA224HashSize; case SHA256: return SHA256HashSize; case SHA384: return SHA384HashSize; default: case SHA512: return SHA512HashSize; } } /* * USHAHashSizeBits * * Description: * This function will return the hashsize for the given SHA * algorithm, expressed in bits. * * Parameters: * whichSha: * which SHA algorithm to query * * Returns: * hash size in bits * */ int USHAHashSizeBits(enum SHAversion whichSha) { switch (whichSha) { case SHA1: return SHA1HashSizeBits; case SHA224: return SHA224HashSizeBits; case SHA256: return SHA256HashSizeBits; case SHA384: return SHA384HashSizeBits; default: D. Eastlake 3rd, T. Hansen [Page 76] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF case SHA512: return SHA512HashSizeBits; } } /* * USHAHashName * * Description: * This function will return the name of the given SHA algorithm * as a string. * * Parameters: * whichSha: * which SHA algorithm to query * * Returns: * character string with the name in it * */ const char *USHAHashName(enum SHAversion whichSha) { switch (whichSha) { case SHA1: return "SHA1"; case SHA224: return "SHA224"; case SHA256: return "SHA256"; case SHA384: return "SHA384"; default: case SHA512: return "SHA512"; } } 8.3 The HMAC Code /**************************** hmac.c ***************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements the HMAC algorithm (Keyed-Hashing for * Message Authentication, [RFC 2104]), expressed in terms of * the various SHA algorithms. */ #include "sha.h" D. Eastlake 3rd, T. Hansen [Page 77] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* * hmac * * Description: * This function will compute an HMAC message digest. * * Parameters: * whichSha: [in] * One of SHA1, SHA224, SHA256, SHA384, SHA512 * key: [in] * The secret shared key. * key_len: [in] * The length of the secret shared key. * message_array: [in] * An array of octets representing the message. * Note: in RFC 2109, this parameter is known * as 'text'. * length: [in] * The length of the message in message_array. * digest: [out] * Where the digest is returned. * NOTE: The length of the digest is determined by * the value of whichSha. * * Returns: * sha Error Code. * */ int hmac(SHAversion whichSha, const unsigned char *message_array, int length, const unsigned char *key, int key_len, uint8_t digest[USHAMaxHashSize]) { HMACContext context; return hmacReset(&context, whichSha, key, key_len) || hmacInput(&context, message_array, length) || hmacResult(&context, digest); } /* * hmacReset * * Description: * This function will initialize the hmacContext in preparation * for computing a new HMAC message digest. * * Parameters: * context: [in/out] * The context to reset. * whichSha: [in] D. Eastlake 3rd, T. Hansen [Page 78] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * One of SHA1, SHA224, SHA256, SHA384, SHA512 * key: [in] * The secret shared key. * key_len: [in] * The length of the secret shared key. * * Returns: * sha Error Code. * */ int hmacReset(HMACContext *context, enum SHAversion whichSha, const unsigned char *key, int key_len) { int i, blocksize, hashsize, ret; /* inner padding - key XORd with ipad */ unsigned char k_ipad[USHA_Max_Message_Block_Size]; /* temporary buffer when keylen > blocksize */ unsigned char tempkey[USHAMaxHashSize]; if (!context) return shaNull; context->Computed = 0; context->Corrupted = shaSuccess; blocksize = context->blockSize = USHABlockSize(whichSha); hashsize = context->hashSize = USHAHashSize(whichSha); context->whichSha = whichSha; /* * If key is longer than the hash blocksize, * reset it to key = HASH(key). */ if (key_len > blocksize) { USHAContext tcontext; int err = USHAReset(&tcontext, whichSha) || USHAInput(&tcontext, key, key_len) || USHAResult(&tcontext, tempkey); if (err != shaSuccess) return err; key = tempkey; key_len = hashsize; } /* * The HMAC transform looks like: * * SHA(K XOR opad, SHA(K XOR ipad, text)) * D. Eastlake 3rd, T. Hansen [Page 79] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * where K is an n byte key, 0-padded to a total of blocksize bytes, * ipad is the byte 0x36 repeated blocksize times, * opad is the byte 0x5c repeated blocksize times, * and text is the data being protected. */ /* store key into the pads, XOR'd with ipad and opad values */ for (i = 0; i < key_len; i++) { k_ipad[i] = key[i] ^ 0x36; context->k_opad[i] = key[i] ^ 0x5c; } /* remaining pad bytes are '\0' XOR'd with ipad and opad values */ for ( ; i < blocksize; i++) { k_ipad[i] = 0x36; context->k_opad[i] = 0x5c; } /* perform inner hash */ /* init context for 1st pass */ ret = USHAReset(&context->shaContext, whichSha) || /* and start with inner pad */ USHAInput(&context->shaContext, k_ipad, blocksize); return context->Corrupted = ret; } /* * hmacInput * * Description: * This function accepts an array of octets as the next portion * of the message. It may be called multiple times. * * Parameters: * context: [in/out] * The HMAC context to update * message_array: [in] * An array of octets representing the next portion of * the message. * length: [in] * The length of the message in message_array * * Returns: * sha Error Code. * */ int hmacInput(HMACContext *context, const unsigned char *text, int text_len) { if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; D. Eastlake 3rd, T. Hansen [Page 80] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF if (context->Computed) return context->Corrupted = shaStateError; /* then text of datagram */ return context->Corrupted = USHAInput(&context->shaContext, text, text_len); } /* * hmacFinalBits * * Description: * This function will add in any final bits of the message. * * Parameters: * context: [in/out] * The HMAC context to update * message_bits: [in] * The final bits of the message, in the upper portion of the * byte. (Use 0b###00000 instead of 0b00000### to input the * three bits ###.) * length: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. */ int hmacFinalBits(HMACContext *context, uint8_t bits, unsigned int bit_count) { if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; if (context->Computed) return context->Corrupted = shaStateError; /* then final bits of datagram */ return context->Corrupted = USHAFinalBits(&context->shaContext, bits, bit_count); } /* * hmacResult * * Description: * This function will return the N-byte message digest into the * Message_Digest array provided by the caller. * * Parameters: * context: [in/out] * The context to use to calculate the HMAC hash. * digest: [out] * Where the digest is returned. * NOTE 2: The length of the hash is determined by the value of * whichSha that was passed to hmacReset(). D. Eastlake 3rd, T. Hansen [Page 81] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * * Returns: * sha Error Code. * */ int hmacResult(HMACContext *context, uint8_t *digest) { int ret; if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; if (context->Computed) return context->Corrupted = shaStateError; /* finish up 1st pass */ /* (Use digest here as a temporary buffer.) */ ret = USHAResult(&context->shaContext, digest) || /* perform outer SHA */ /* init context for 2nd pass */ USHAReset(&context->shaContext, context->whichSha) || /* start with outer pad */ USHAInput(&context->shaContext, context->k_opad, context->blockSize) || /* then results of 1st hash */ USHAInput(&context->shaContext, digest, context->hashSize) || /* finish up 2nd pass */ USHAResult(&context->shaContext, digest); context->Computed = 1; return context->Corrupted = ret; } 8.4 The HKDF Code /**************************** hkdf.c ***************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file implements the HKDF algorithm (HMAC-based * Extract-and-Expand Key Derivation Function, RFC 5869), * expressed in terms of the various SHA algorithms. D. Eastlake 3rd, T. Hansen [Page 82] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF */ #include "sha.h" #include #include /* * hkdf * * Description: * This function will compute an HKDF message digest. * * Parameters: * whichSha: [in] * One of SHA1, SHA224, SHA256, SHA384, SHA512 * salt: [in] * The optional salt value (a non-secret random value); * if not provided (salt == NULL), it is set internally * to a string of HashLen(whichSha) zeros. * salt_len: [in] * The length of the salt value. (Ignored if salt == NULL.) * ikm: [in] * Input keying material. * ikm_len: [in] * The length of the input keying material. * info: [in] * The optional context and application specific information. * If info == NULL or a zero-length string, it is ignored. * info_len: [in] * The length of the optional context and application specific * information. (Ignored if info == NULL.) * okm: [out] * Where the HKDF is to be stored. * okm_len: [in] * The length of the buffer to hold okm. * okm_len must be <= 255 * USHABlockSize(whichSha) * * Notes: * Calls hkdfExtract() and hkdfExpand(). * * Returns: * sha Error Code. * */ int hkdf(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len) { D. Eastlake 3rd, T. Hansen [Page 83] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF uint8_t prk[USHAMaxHashSize]; return hkdfExtract(whichSha, salt, salt_len, ikm, ikm_len, prk) || hkdfExpand(whichSha, prk, USHAHashSize(whichSha), info, info_len, okm, okm_len); } /* * hkdfExtract * * Description: * This function will perform HKDF extraction. * * Parameters: * whichSha: [in] * One of SHA1, SHA224, SHA256, SHA384, SHA512 * salt: [in] * The optional salt value (a non-secret random value); * if not provided (salt == NULL), it is set internally * to a string of HashLen(whichSha) zeros. * salt_len: [in] * The length of the salt value. (Ignored if salt == NULL.) * ikm: [in] * Input keying material. * ikm_len: [in] * The length of the input keying material. * prk: [out] * Where the HKDF extraction is to be stored. * Must be larger than USHAHashSize(whichSha); * * Returns: * sha Error Code. * */ int hkdfExtract(SHAversion whichSha, const unsigned char *salt, int salt_len, const unsigned char *ikm, int ikm_len, uint8_t prk[USHAMaxHashSize]) { unsigned char nullSalt[USHAMaxHashSize]; if (salt == 0) { salt = nullSalt; salt_len = USHAHashSize(whichSha); memset(nullSalt, '\0', salt_len); } else if (salt_len < 0) { return shaBadParam; } return hmac(whichSha, ikm, ikm_len, salt, salt_len, prk); } /* D. Eastlake 3rd, T. Hansen [Page 84] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * hkdfExpand * * Description: * This function will perform HKDF expansion. * * Parameters: * whichSha: [in] * One of SHA1, SHA224, SHA256, SHA384, SHA512 * info: [in] * The optional context and application specific information. * If info == NULL or a zero-length string, it is ignored. * info_len: [in] * The length of the optional context and application specific * information. (Ignored if info == NULL.) * okm: [out] * Where the HKDF is to be stored. * okm_len: [in] * The length of the buffer to hold okm. * okm_len must be <= 255 * USHABlockSize(whichSha) * * Returns: * sha Error Code. * */ int hkdfExpand(SHAversion whichSha, const uint8_t prk[ ], int prk_len, const unsigned char *info, int info_len, uint8_t okm[ ], int okm_len) { int hash_len, N; unsigned char T[USHAMaxHashSize]; int Tlen, where, i; if (info == 0) { info = (const unsigned char *)""; info_len = 0; } else if (info_len < 0) { return shaBadParam; } else if (prk_len < 0) { return shaBadParam; } else if (!okm) { return shaBadParam; } hash_len = USHAHashSize(whichSha); if (prk_len < hash_len) return shaBadParam; N = okm_len / hash_len; if ((okm_len % hash_len) != 0) N++; if (N > 255) return shaBadParam; Tlen = 0; D. Eastlake 3rd, T. Hansen [Page 85] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF where = 0; for (i = 1; i <= N; i++) { HMACContext context; unsigned char c = i; int ret = hmacReset(&context, whichSha, prk, hash_len) || hmacInput(&context, T, Tlen) || hmacInput(&context, info, info_len) || hmacInput(&context, &c, 1) || hmacResult(&context, T); if (ret != shaSuccess) return ret; memcpy(okm + where, T, (i != N) ? hash_len : (okm_len - where)); where += hash_len; Tlen = hash_len; } return shaSuccess; } /* * hkdfReset * * Description: * This function will initialize the hkdfContext in preparation * for computing a new HKDF message digest. It is used for * arbitrary length inputs. * * Parameters: * context: [in/out] * The context to reset. * whichSha: [in] * One of SHA1, SHA224, SHA256, SHA384, SHA512 * salt: [in] * The optional salt value (a non-secret random value); * if not provided (salt == NULL), it is set internally * to a string of HashLen(whichSha) zeros. * salt_len: [in] * The length of the salt value. (Ignored if salt == NULL.) * * Returns: * sha Error Code. * */ int hkdfReset(HKDFContext *context, enum SHAversion whichSha, const unsigned char *salt, int salt_len) { unsigned char nullSalt[USHAMaxHashSize]; if (!context) return shaNull; context->whichSha = whichSha; context->hashSize = USHAHashSize(whichSha); D. Eastlake 3rd, T. Hansen [Page 86] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF if (salt == 0) { salt = nullSalt; salt_len = context->hashSize; memset(nullSalt, '\0', salt_len); } return hmacReset(&context->hmacContext, whichSha, salt, salt_len); } /* * hkdfInput * * Description: * This function accepts an array of octets as the next portion * of the input keying material. It may be called multiple times. * * Parameters: * context: [in/out] * The HKDF context to update. * ikm: [in] * An array of octets representing the next portion of * the input keying material. * ikm_len: [in] * The length of ikm. * * Returns: * sha Error Code. * */ int hkdfInput(HKDFContext *context, const unsigned char *ikm, int ikm_len) { if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; if (context->Computed) return context->Corrupted = shaStateError; return hmacInput(&context->hmacContext, ikm, ikm_len); } /* * hkdfFinalBits * * Description: * This function will add in any final bits of the * input keying material. * * Parameters: * context: [in/out] * The HKDF context to update * ikm_bits: [in] * The final bits of the input keying material, in the upper D. Eastlake 3rd, T. Hansen [Page 87] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * portion of the byte. (Use 0b###00000 instead of 0b00000### * to input the three bits ###.) * ikm_bit_count: [in] * The number of bits in message_bits, between 1 and 7. * * Returns: * sha Error Code. */ int hkdfFinalBits(HKDFContext *context, uint8_t ikm_bits, unsigned int ikm_bit_count) { if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; if (context->Computed) return context->Corrupted = shaStateError; return hmacFinalBits(&context->hmacContext, ikm_bits, ikm_bit_count); } /* * hkdfResult * * Description: * This function will finish the HKDF extraction and perform the * final HKDF expansion. * * Parameters: * context: [in/out] * The HKDF context to use to calculate the HKDF hash. * prk: [out] * An optional location to store the HKDF extraction. * Either NULL, or pointer to a buffer that must be * larger than USHAHashSize(whichSha); * info: [in] * The optional context and application specific information. * If info == NULL or a zero-length string, it is ignored. * info_len: [in] * The length of the optional context and application specific * information. (Ignored if info == NULL.) * okm: [out] * Where the HKDF is to be stored. * okm_len: [in] * The length of the buffer to hold okm. * okm_len must be <= 255 * USHABlockSize(whichSha) * * Returns: * sha Error Code. * */ int hkdfResult(HKDFContext *context, uint8_t prk[USHAMaxHashSize], const unsigned char *info, int info_len, D. Eastlake 3rd, T. Hansen [Page 88] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF uint8_t okm[ ], int okm_len) { uint8_t prkbuf[USHAMaxHashSize]; int ret; if (!context) return shaNull; if (context->Corrupted) return context->Corrupted; if (context->Computed) return context->Corrupted = shaStateError; if (!okm) return context->Corrupted = shaBadParam; if (!prk) prk = prkbuf; ret = hmacResult(&context->hmacContext, prk) || hkdfExpand(context->whichSha, prk, context->hashSize, info, info_len, okm, okm_len); context->Computed = 1; return context->Corrupted = ret; } 8.5 The Test Driver The following code is a main program test driver to exercise the code in sha1.c, sha224-256.c, sha384-512.c, hmac.c, and hkdf.c. The test driver can also be used as a standalone program for generating the hashes. See also [SHAVS]. /************************** shatest.c **************************/ /***************** See RFC NNNN for details. *******************/ /* Copyright (c) 2010 IETF Trust and the persons identified as */ /* authors of the code. All rights reserved. */ /* See sha.h for terms of use and redistribution. */ /* * Description: * This file will exercise the SHA code performing * the three tests documented in FIPS PUB 180-2 * (http://csrc.nist.gov/publications/fips/ * fips180-2/fips180-2withchangenotice.pdf) * one that calls SHAInput with an exact multiple of 512 bits * the seven tests documented for each algorithm in * "The Secure Hash Algorithm Validation System (SHAVS)" * (http://csrc.nist.gov/cryptval/shs/SHAVS.pdf), * three of which are bit-level tests * * This file will exercise the HMAC SHA1 code performing * the seven tests documented in RFCs [RFC 2202] and [RFC 4231]. * D. Eastlake 3rd, T. Hansen [Page 89] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF * This file will exercise the HKDF code performing * the seven tests documented in RFC 4869. * * To run the tests and just see PASSED/FAILED, use the -p option. * * Other options exercise: * hashing an arbitrary string * hashing a file's contents * a few error test checks * printing the results in raw format * * Portability Issues: * None. * */ #include #include #include #include #include #include /* defines getopt() and optarg */ #include "sha.h" static int scasecmp(const char *s1, const char *s2); /* * Define patterns for testing */ #define TEST1 "abc" #define TEST2_1 \ "abcdbcdecdefdefgefghfghighijhijkijkljklmklmnlmnomnopnopq" #define TEST2_2a \ "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn" #define TEST2_2b \ "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu" #define TEST2_2 TEST2_2a TEST2_2b #define TEST3 "a" /* times 1000000 */ #define TEST4a "01234567012345670123456701234567" #define TEST4b "01234567012345670123456701234567" /* an exact multiple of 512 bits */ #define TEST4 TEST4a TEST4b /* times 10 */ #define TEST7_1 \ "\x49\xb2\xae\xc2\x59\x4b\xbe\x3a\x3b\x11\x75\x42\xd9\x4a\xc8" #define TEST8_1 \ "\x9a\x7d\xfd\xf1\xec\xea\xd0\x6e\xd6\x46\xaa\x55\xfe\x75\x71\x46" #define TEST9_1 \ "\x65\xf9\x32\x99\x5b\xa4\xce\x2c\xb1\xb4\xa2\xe7\x1a\xe7\x02\x20" \ "\xaa\xce\xc8\x96\x2d\xd4\x49\x9c\xbd\x7c\x88\x7a\x94\xea\xaa\x10" \ D. Eastlake 3rd, T. Hansen [Page 90] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "\x1e\xa5\xaa\xbc\x52\x9b\x4e\x7e\x43\x66\x5a\x5a\xf2\xcd\x03\xfe" \ "\x67\x8e\xa6\xa5\x00\x5b\xba\x3b\x08\x22\x04\xc2\x8b\x91\x09\xf4" \ "\x69\xda\xc9\x2a\xaa\xb3\xaa\x7c\x11\xa1\xb3\x2a" #define TEST10_1 \ "\xf7\x8f\x92\x14\x1b\xcd\x17\x0a\xe8\x9b\x4f\xba\x15\xa1\xd5\x9f" \ "\x3f\xd8\x4d\x22\x3c\x92\x51\xbd\xac\xbb\xae\x61\xd0\x5e\xd1\x15" \ "\xa0\x6a\x7c\xe1\x17\xb7\xbe\xea\xd2\x44\x21\xde\xd9\xc3\x25\x92" \ "\xbd\x57\xed\xea\xe3\x9c\x39\xfa\x1f\xe8\x94\x6a\x84\xd0\xcf\x1f" \ "\x7b\xee\xad\x17\x13\xe2\xe0\x95\x98\x97\x34\x7f\x67\xc8\x0b\x04" \ "\x00\xc2\x09\x81\x5d\x6b\x10\xa6\x83\x83\x6f\xd5\x56\x2a\x56\xca" \ "\xb1\xa2\x8e\x81\xb6\x57\x66\x54\x63\x1c\xf1\x65\x66\xb8\x6e\x3b" \ "\x33\xa1\x08\xb0\x53\x07\xc0\x0a\xff\x14\xa7\x68\xed\x73\x50\x60" \ "\x6a\x0f\x85\xe6\xa9\x1d\x39\x6f\x5b\x5c\xbe\x57\x7f\x9b\x38\x80" \ "\x7c\x7d\x52\x3d\x6d\x79\x2f\x6e\xbc\x24\xa4\xec\xf2\xb3\xa4\x27" \ "\xcd\xbb\xfb" #define TEST7_224 \ "\xf0\x70\x06\xf2\x5a\x0b\xea\x68\xcd\x76\xa2\x95\x87\xc2\x8d" #define TEST8_224 \ "\x18\x80\x40\x05\xdd\x4f\xbd\x15\x56\x29\x9d\x6f\x9d\x93\xdf\x62" #define TEST9_224 \ "\xa2\xbe\x6e\x46\x32\x81\x09\x02\x94\xd9\xce\x94\x82\x65\x69\x42" \ "\x3a\x3a\x30\x5e\xd5\xe2\x11\x6c\xd4\xa4\xc9\x87\xfc\x06\x57\x00" \ "\x64\x91\xb1\x49\xcc\xd4\xb5\x11\x30\xac\x62\xb1\x9d\xc2\x48\xc7" \ "\x44\x54\x3d\x20\xcd\x39\x52\xdc\xed\x1f\x06\xcc\x3b\x18\xb9\x1f" \ "\x3f\x55\x63\x3e\xcc\x30\x85\xf4\x90\x70\x60\xd2" #define TEST10_224 \ "\x55\xb2\x10\x07\x9c\x61\xb5\x3a\xdd\x52\x06\x22\xd1\xac\x97\xd5" \ "\xcd\xbe\x8c\xb3\x3a\xa0\xae\x34\x45\x17\xbe\xe4\xd7\xba\x09\xab" \ "\xc8\x53\x3c\x52\x50\x88\x7a\x43\xbe\xbb\xac\x90\x6c\x2e\x18\x37" \ "\xf2\x6b\x36\xa5\x9a\xe3\xbe\x78\x14\xd5\x06\x89\x6b\x71\x8b\x2a" \ "\x38\x3e\xcd\xac\x16\xb9\x61\x25\x55\x3f\x41\x6f\xf3\x2c\x66\x74" \ "\xc7\x45\x99\xa9\x00\x53\x86\xd9\xce\x11\x12\x24\x5f\x48\xee\x47" \ "\x0d\x39\x6c\x1e\xd6\x3b\x92\x67\x0c\xa5\x6e\xc8\x4d\xee\xa8\x14" \ "\xb6\x13\x5e\xca\x54\x39\x2b\xde\xdb\x94\x89\xbc\x9b\x87\x5a\x8b" \ "\xaf\x0d\xc1\xae\x78\x57\x36\x91\x4a\xb7\xda\xa2\x64\xbc\x07\x9d" \ "\x26\x9f\x2c\x0d\x7e\xdd\xd8\x10\xa4\x26\x14\x5a\x07\x76\xf6\x7c" \ "\x87\x82\x73" #define TEST7_256 \ "\xbe\x27\x46\xc6\xdb\x52\x76\x5f\xdb\x2f\x88\x70\x0f\x9a\x73" #define TEST8_256 \ "\xe3\xd7\x25\x70\xdc\xdd\x78\x7c\xe3\x88\x7a\xb2\xcd\x68\x46\x52" #define TEST9_256 \ "\x3e\x74\x03\x71\xc8\x10\xc2\xb9\x9f\xc0\x4e\x80\x49\x07\xef\x7c" \ "\xf2\x6b\xe2\x8b\x57\xcb\x58\xa3\xe2\xf3\xc0\x07\x16\x6e\x49\xc1" \ "\x2e\x9b\xa3\x4c\x01\x04\x06\x91\x29\xea\x76\x15\x64\x25\x45\x70" \ "\x3a\x2b\xd9\x01\xe1\x6e\xb0\xe0\x5d\xeb\xa0\x14\xeb\xff\x64\x06" \ "\xa0\x7d\x54\x36\x4e\xff\x74\x2d\xa7\x79\xb0\xb3" #define TEST10_256 \ "\x83\x26\x75\x4e\x22\x77\x37\x2f\x4f\xc1\x2b\x20\x52\x7a\xfe\xf0" \ "\x4d\x8a\x05\x69\x71\xb1\x1a\xd5\x71\x23\xa7\xc1\x37\x76\x00\x00" \ D. Eastlake 3rd, T. Hansen [Page 91] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "\xd7\xbe\xf6\xf3\xc1\xf7\xa9\x08\x3a\xa3\x9d\x81\x0d\xb3\x10\x77" \ "\x7d\xab\x8b\x1e\x7f\x02\xb8\x4a\x26\xc7\x73\x32\x5f\x8b\x23\x74" \ "\xde\x7a\x4b\x5a\x58\xcb\x5c\x5c\xf3\x5b\xce\xe6\xfb\x94\x6e\x5b" \ "\xd6\x94\xfa\x59\x3a\x8b\xeb\x3f\x9d\x65\x92\xec\xed\xaa\x66\xca" \ "\x82\xa2\x9d\x0c\x51\xbc\xf9\x33\x62\x30\xe5\xd7\x84\xe4\xc0\xa4" \ "\x3f\x8d\x79\xa3\x0a\x16\x5c\xba\xbe\x45\x2b\x77\x4b\x9c\x71\x09" \ "\xa9\x7d\x13\x8f\x12\x92\x28\x96\x6f\x6c\x0a\xdc\x10\x6a\xad\x5a" \ "\x9f\xdd\x30\x82\x57\x69\xb2\xc6\x71\xaf\x67\x59\xdf\x28\xeb\x39" \ "\x3d\x54\xd6" #define TEST7_384 \ "\x8b\xc5\x00\xc7\x7c\xee\xd9\x87\x9d\xa9\x89\x10\x7c\xe0\xaa" #define TEST8_384 \ "\xa4\x1c\x49\x77\x79\xc0\x37\x5f\xf1\x0a\x7f\x4e\x08\x59\x17\x39" #define TEST9_384 \ "\x68\xf5\x01\x79\x2d\xea\x97\x96\x76\x70\x22\xd9\x3d\xa7\x16\x79" \ "\x30\x99\x20\xfa\x10\x12\xae\xa3\x57\xb2\xb1\x33\x1d\x40\xa1\xd0" \ "\x3c\x41\xc2\x40\xb3\xc9\xa7\x5b\x48\x92\xf4\xc0\x72\x4b\x68\xc8" \ "\x75\x32\x1a\xb8\xcf\xe5\x02\x3b\xd3\x75\xbc\x0f\x94\xbd\x89\xfe" \ "\x04\xf2\x97\x10\x5d\x7b\x82\xff\xc0\x02\x1a\xeb\x1c\xcb\x67\x4f" \ "\x52\x44\xea\x34\x97\xde\x26\xa4\x19\x1c\x5f\x62\xe5\xe9\xa2\xd8" \ "\x08\x2f\x05\x51\xf4\xa5\x30\x68\x26\xe9\x1c\xc0\x06\xce\x1b\xf6" \ "\x0f\xf7\x19\xd4\x2f\xa5\x21\xc8\x71\xcd\x23\x94\xd9\x6e\xf4\x46" \ "\x8f\x21\x96\x6b\x41\xf2\xba\x80\xc2\x6e\x83\xa9" #define TEST10_384 \ "\x39\x96\x69\xe2\x8f\x6b\x9c\x6d\xbc\xbb\x69\x12\xec\x10\xff\xcf" \ "\x74\x79\x03\x49\xb7\xdc\x8f\xbe\x4a\x8e\x7b\x3b\x56\x21\xdb\x0f" \ "\x3e\x7d\xc8\x7f\x82\x32\x64\xbb\xe4\x0d\x18\x11\xc9\xea\x20\x61" \ "\xe1\xc8\x4a\xd1\x0a\x23\xfa\xc1\x72\x7e\x72\x02\xfc\x3f\x50\x42" \ "\xe6\xbf\x58\xcb\xa8\xa2\x74\x6e\x1f\x64\xf9\xb9\xea\x35\x2c\x71" \ "\x15\x07\x05\x3c\xf4\xe5\x33\x9d\x52\x86\x5f\x25\xcc\x22\xb5\xe8" \ "\x77\x84\xa1\x2f\xc9\x61\xd6\x6c\xb6\xe8\x95\x73\x19\x9a\x2c\xe6" \ "\x56\x5c\xbd\xf1\x3d\xca\x40\x38\x32\xcf\xcb\x0e\x8b\x72\x11\xe8" \ "\x3a\xf3\x2a\x11\xac\x17\x92\x9f\xf1\xc0\x73\xa5\x1c\xc0\x27\xaa" \ "\xed\xef\xf8\x5a\xad\x7c\x2b\x7c\x5a\x80\x3e\x24\x04\xd9\x6d\x2a" \ "\x77\x35\x7b\xda\x1a\x6d\xae\xed\x17\x15\x1c\xb9\xbc\x51\x25\xa4" \ "\x22\xe9\x41\xde\x0c\xa0\xfc\x50\x11\xc2\x3e\xcf\xfe\xfd\xd0\x96" \ "\x76\x71\x1c\xf3\xdb\x0a\x34\x40\x72\x0e\x16\x15\xc1\xf2\x2f\xbc" \ "\x3c\x72\x1d\xe5\x21\xe1\xb9\x9b\xa1\xbd\x55\x77\x40\x86\x42\x14" \ "\x7e\xd0\x96" #define TEST7_512 \ "\x08\xec\xb5\x2e\xba\xe1\xf7\x42\x2d\xb6\x2b\xcd\x54\x26\x70" #define TEST8_512 \ "\x8d\x4e\x3c\x0e\x38\x89\x19\x14\x91\x81\x6e\x9d\x98\xbf\xf0\xa0" #define TEST9_512 \ "\x3a\xdd\xec\x85\x59\x32\x16\xd1\x61\x9a\xa0\x2d\x97\x56\x97\x0b" \ "\xfc\x70\xac\xe2\x74\x4f\x7c\x6b\x27\x88\x15\x10\x28\xf7\xb6\xa2" \ "\x55\x0f\xd7\x4a\x7e\x6e\x69\xc2\xc9\xb4\x5f\xc4\x54\x96\x6d\xc3" \ "\x1d\x2e\x10\xda\x1f\x95\xce\x02\xbe\xb4\xbf\x87\x65\x57\x4c\xbd" \ "\x6e\x83\x37\xef\x42\x0a\xdc\x98\xc1\x5c\xb6\xd5\xe4\xa0\x24\x1b" \ "\xa0\x04\x6d\x25\x0e\x51\x02\x31\xca\xc2\x04\x6c\x99\x16\x06\xab" \ D. Eastlake 3rd, T. Hansen [Page 92] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "\x4e\xe4\x14\x5b\xee\x2f\xf4\xbb\x12\x3a\xab\x49\x8d\x9d\x44\x79" \ "\x4f\x99\xcc\xad\x89\xa9\xa1\x62\x12\x59\xed\xa7\x0a\x5b\x6d\xd4" \ "\xbd\xd8\x77\x78\xc9\x04\x3b\x93\x84\xf5\x49\x06" #define TEST10_512 \ "\xa5\x5f\x20\xc4\x11\xaa\xd1\x32\x80\x7a\x50\x2d\x65\x82\x4e\x31" \ "\xa2\x30\x54\x32\xaa\x3d\x06\xd3\xe2\x82\xa8\xd8\x4e\x0d\xe1\xde" \ "\x69\x74\xbf\x49\x54\x69\xfc\x7f\x33\x8f\x80\x54\xd5\x8c\x26\xc4" \ "\x93\x60\xc3\xe8\x7a\xf5\x65\x23\xac\xf6\xd8\x9d\x03\xe5\x6f\xf2" \ "\xf8\x68\x00\x2b\xc3\xe4\x31\xed\xc4\x4d\xf2\xf0\x22\x3d\x4b\xb3" \ "\xb2\x43\x58\x6e\x1a\x7d\x92\x49\x36\x69\x4f\xcb\xba\xf8\x8d\x95" \ "\x19\xe4\xeb\x50\xa6\x44\xf8\xe4\xf9\x5e\xb0\xea\x95\xbc\x44\x65" \ "\xc8\x82\x1a\xac\xd2\xfe\x15\xab\x49\x81\x16\x4b\xbb\x6d\xc3\x2f" \ "\x96\x90\x87\xa1\x45\xb0\xd9\xcc\x9c\x67\xc2\x2b\x76\x32\x99\x41" \ "\x9c\xc4\x12\x8b\xe9\xa0\x77\xb3\xac\xe6\x34\x06\x4e\x6d\x99\x28" \ "\x35\x13\xdc\x06\xe7\x51\x5d\x0d\x73\x13\x2e\x9a\x0d\xc6\xd3\xb1" \ "\xf8\xb2\x46\xf1\xa9\x8a\x3f\xc7\x29\x41\xb1\xe3\xbb\x20\x98\xe8" \ "\xbf\x16\xf2\x68\xd6\x4f\x0b\x0f\x47\x07\xfe\x1e\xa1\xa1\x79\x1b" \ "\xa2\xf3\xc0\xc7\x58\xe5\xf5\x51\x86\x3a\x96\xc9\x49\xad\x47\xd7" \ "\xfb\x40\xd2" #define SHA1_SEED "\xd0\x56\x9c\xb3\x66\x5a\x8a\x43\xeb\x6e\xa2\x3d" \ "\x75\xa3\xc4\xd2\x05\x4a\x0d\x7d" #define SHA224_SEED "\xd0\x56\x9c\xb3\x66\x5a\x8a\x43\xeb\x6e\xa2" \ "\x3d\x75\xa3\xc4\xd2\x05\x4a\x0d\x7d\x66\xa9\xca\x99\xc9\xce\xb0" \ "\x27" #define SHA256_SEED "\xf4\x1e\xce\x26\x13\xe4\x57\x39\x15\x69\x6b" \ "\x5a\xdc\xd5\x1c\xa3\x28\xbe\x3b\xf5\x66\xa9\xca\x99\xc9\xce\xb0" \ "\x27\x9c\x1c\xb0\xa7" #define SHA384_SEED "\x82\x40\xbc\x51\xe4\xec\x7e\xf7\x6d\x18\xe3" \ "\x52\x04\xa1\x9f\x51\xa5\x21\x3a\x73\xa8\x1d\x6f\x94\x46\x80\xd3" \ "\x07\x59\x48\xb7\xe4\x63\x80\x4e\xa3\xd2\x6e\x13\xea\x82\x0d\x65" \ "\xa4\x84\xbe\x74\x53" #define SHA512_SEED "\x47\x3f\xf1\xb9\xb3\xff\xdf\xa1\x26\x69\x9a" \ "\xc7\xef\x9e\x8e\x78\x77\x73\x09\x58\x24\xc6\x42\x55\x7c\x13\x99" \ "\xd9\x8e\x42\x20\x44\x8d\xc3\x5b\x99\xbf\xdd\x44\x77\x95\x43\x92" \ "\x4c\x1c\xe9\x3b\xc5\x94\x15\x38\x89\x5d\xb9\x88\x26\x1b\x00\x77" \ "\x4b\x12\x27\x20\x39" #define TESTCOUNT 10 #define HASHCOUNT 5 #define RANDOMCOUNT 4 #define HMACTESTCOUNT 7 #define HKDFTESTCOUNT 7 #define PRINTNONE 0 #define PRINTTEXT 1 #define PRINTRAW 2 #define PRINTHEX 3 #define PRINTBASE64 4 #define PRINTPASSFAIL 1 D. Eastlake 3rd, T. Hansen [Page 93] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF #define PRINTFAIL 2 #define length(x) (sizeof(x)-1) /* Test arrays for hashes. */ struct hash { const char *name; SHAversion whichSha; int hashsize; struct { const char *testarray; int length; long repeatcount; int extrabits; int numberExtrabits; const char *resultarray; } tests[TESTCOUNT]; const char *randomtest; const char *randomresults[RANDOMCOUNT]; } hashes[HASHCOUNT] = { { "SHA1", SHA1, SHA1HashSize, { /* 1 */ { TEST1, length(TEST1), 1, 0, 0, "A9993E364706816ABA3E25717850C26C9CD0D89D" }, /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, "84983E441C3BD26EBAAE4AA1F95129E5E54670F1" }, /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "34AA973CD4C4DAA4F61EEB2BDBAD27316534016F" }, /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "DEA356A2CDDD90C7A7ECEDC5EBB563934F460452" }, /* 5 */ { "", 0, 0, 0x98, 5, "29826B003B906E660EFF4027CE98AF3531AC75BA" }, /* 6 */ { "\x5e", 1, 1, 0, 0, "5E6F80A34A9798CAFC6A5DB96CC57BA4C4DB59C2" }, /* 7 */ { TEST7_1, length(TEST7_1), 1, 0x80, 3, "6239781E03729919C01955B3FFA8ACB60B988340" }, /* 8 */ { TEST8_1, length(TEST8_1), 1, 0, 0, "82ABFF6605DBE1C17DEF12A394FA22A82B544A35" }, /* 9 */ { TEST9_1, length(TEST9_1), 1, 0xE0, 3, "8C5B2A5DDAE5A97FC7F9D85661C672ADBF7933D4" }, /* 10 */ { TEST10_1, length(TEST10_1), 1, 0, 0, "CB0082C8F197D260991BA6A460E76E202BAD27B3" } }, SHA1_SEED, { "E216836819477C7F78E0D843FE4FF1B6D6C14CD4", "A2DBC7A5B1C6C0A8BCB7AAA41252A6A7D0690DBC", "DB1F9050BB863DFEF4CE37186044E2EEB17EE013", "127FDEDF43D372A51D5747C48FBFFE38EF6CDF7B" } }, { "SHA224", SHA224, SHA224HashSize, { /* 1 */ { TEST1, length(TEST1), 1, 0, 0, D. Eastlake 3rd, T. Hansen [Page 94] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "23097D223405D8228642A477BDA255B32AADBCE4BDA0B3F7E36C9DA7" }, /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, "75388B16512776CC5DBA5DA1FD890150B0C6455CB4F58B1952522525" }, /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "20794655980C91D8BBB4C1EA97618A4BF03F42581948B2EE4EE7AD67" }, /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "567F69F168CD7844E65259CE658FE7AADFA25216E68ECA0EB7AB8262" }, /* 5 */ { "", 0, 0, 0x68, 5, "E3B048552C3C387BCAB37F6EB06BB79B96A4AEE5FF27F51531A9551C" }, /* 6 */ { "\x07", 1, 1, 0, 0, "00ECD5F138422B8AD74C9799FD826C531BAD2FCABC7450BEE2AA8C2A" }, /* 7 */ { TEST7_224, length(TEST7_224), 1, 0xA0, 3, "1B01DB6CB4A9E43DED1516BEB3DB0B87B6D1EA43187462C608137150" }, /* 8 */ { TEST8_224, length(TEST8_224), 1, 0, 0, "DF90D78AA78821C99B40BA4C966921ACCD8FFB1E98AC388E56191DB1" }, /* 9 */ { TEST9_224, length(TEST9_224), 1, 0xE0, 3, "54BEA6EAB8195A2EB0A7906A4B4A876666300EEFBD1F3B8474F9CD57" }, /* 10 */ { TEST10_224, length(TEST10_224), 1, 0, 0, "0B31894EC8937AD9B91BDFBCBA294D9ADEFAA18E09305E9F20D5C3A4" } }, SHA224_SEED, { "100966A5B4FDE0B42E2A6C5953D4D7F41BA7CF79FD" "2DF431416734BE", "1DCA396B0C417715DEFAAE9641E10A2E99D55A" "BCB8A00061EB3BE8BD", "1864E627BDB2319973CD5ED7D68DA71D8B" "F0F983D8D9AB32C34ADB34", "A2406481FC1BCAF24DD08E6752E844" "709563FB916227FED598EB621F" } }, { "SHA256", SHA256, SHA256HashSize, { /* 1 */ { TEST1, length(TEST1), 1, 0, 0, "BA7816BF8F01CFEA4141" "40DE5DAE2223B00361A396177A9CB410FF61F20015AD" }, /* 2 */ { TEST2_1, length(TEST2_1), 1, 0, 0, "248D6A61D20638B8" "E5C026930C3E6039A33CE45964FF2167F6ECEDD419DB06C1" }, /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "CDC76E5C9914FB92" "81A1C7E284D73E67F1809A48A497200E046D39CCC7112CD0" }, /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "594847328451BDFA" "85056225462CC1D867D877FB388DF0CE35F25AB5562BFBB5" }, /* 5 */ { "", 0, 0, 0x68, 5, "D6D3E02A31A84A8CAA9718ED6C2057BE" "09DB45E7823EB5079CE7A573A3760F95" }, /* 6 */ { "\x19", 1, 1, 0, 0, "68AA2E2EE5DFF96E3355E6C7EE373E3D" "6A4E17F75F9518D843709C0C9BC3E3D4" }, /* 7 */ { TEST7_256, length(TEST7_256), 1, 0x60, 3, "77EC1DC8" "9C821FF2A1279089FA091B35B8CD960BCAF7DE01C6A7680756BEB972" }, /* 8 */ { TEST8_256, length(TEST8_256), 1, 0, 0, "175EE69B02BA" "9B58E2B0A5FD13819CEA573F3940A94F825128CF4209BEABB4E8" }, /* 9 */ { TEST9_256, length(TEST9_256), 1, 0xA0, 3, "3E9AD646" "8BBBAD2AC3C2CDC292E018BA5FD70B960CF1679777FCE708FDB066E9" }, /* 10 */ { TEST10_256, length(TEST10_256), 1, 0, 0, "97DBCA7D" "F46D62C8A422C941DD7E835B8AD3361763F7E9B2D95F4F0DA6E1CCBC" }, }, SHA256_SEED, { "83D28614D49C3ADC1D6FC05DB5F48037C056F8D2A4CE44" "EC6457DEA5DD797CD1", "99DBE3127EF2E93DD9322D6A07909EB33B6399" "5E529B3F954B8581621BB74D39", "8D4BE295BB64661CA3C7EFD129A2F7" D. Eastlake 3rd, T. Hansen [Page 95] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "25B33072DBDDE32385B9A87B9AF88EA76F", "40AF5D3F9716B040DF9408" "E31536B70FF906EC51B00447CA97D7DD97C12411F4" } }, { "SHA384", SHA384, SHA384HashSize, { /* 1 */ { TEST1, length(TEST1), 1, 0, 0, "CB00753F45A35E8BB5A03D699AC65007272C32AB0EDED163" "1A8B605A43FF5BED8086072BA1E7CC2358BAECA134C825A7" }, /* 2 */ { TEST2_2, length(TEST2_2), 1, 0, 0, "09330C33F71147E83D192FC782CD1B4753111B173B3B05D2" "2FA08086E3B0F712FCC7C71A557E2DB966C3E9FA91746039" }, /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "9D0E1809716474CB086E834E310A4A1CED149E9C00F24852" "7972CEC5704C2A5B07B8B3DC38ECC4EBAE97DDD87F3D8985" }, /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "2FC64A4F500DDB6828F6A3430B8DD72A368EB7F3A8322A70" "BC84275B9C0B3AB00D27A5CC3C2D224AA6B61A0D79FB4596" }, /* 5 */ { "", 0, 0, 0x10, 5, "8D17BE79E32B6718E07D8A603EB84BA0478F7FCFD1BB9399" "5F7D1149E09143AC1FFCFC56820E469F3878D957A15A3FE4" }, /* 6 */ { "\xb9", 1, 1, 0, 0, "BC8089A19007C0B14195F4ECC74094FEC64F01F90929282C" "2FB392881578208AD466828B1C6C283D2722CF0AD1AB6938" }, /* 7 */ { TEST7_384, length(TEST7_384), 1, 0xA0, 3, "D8C43B38E12E7C42A7C9B810299FD6A770BEF30920F17532" "A898DE62C7A07E4293449C0B5FA70109F0783211CFC4BCE3" }, /* 8 */ { TEST8_384, length(TEST8_384), 1, 0, 0, "C9A68443A005812256B8EC76B00516F0DBB74FAB26D66591" "3F194B6FFB0E91EA9967566B58109CBC675CC208E4C823F7" }, /* 9 */ { TEST9_384, length(TEST9_384), 1, 0xE0, 3, "5860E8DE91C21578BB4174D227898A98E0B45C4C760F0095" "49495614DAEDC0775D92D11D9F8CE9B064EEAC8DAFC3A297" }, /* 10 */ { TEST10_384, length(TEST10_384), 1, 0, 0, "4F440DB1E6EDD2899FA335F09515AA025EE177A79F4B4AAF" "38E42B5C4DE660F5DE8FB2A5B2FBD2A3CBFFD20CFF1288C0" } }, SHA384_SEED, { "CE44D7D63AE0C91482998CF662A51EC80BF6FC68661A3C" "57F87566112BD635A743EA904DEB7D7A42AC808CABE697F38F", "F9C6D2" "61881FEE41ACD39E67AA8D0BAD507C7363EB67E2B81F45759F9C0FD7B503" "DF1A0B9E80BDE7BC333D75B804197D", "D96512D8C9F4A7A4967A366C01" "C6FD97384225B58343A88264847C18E4EF8AB7AEE4765FFBC3E30BD485D3" "638A01418F", "0CA76BD0813AF1509E170907A96005938BC985628290B2" "5FEF73CF6FAD68DDBA0AC8920C94E0541607B0915A7B4457F7" } }, { "SHA512", SHA512, SHA512HashSize, { /* 1 */ { TEST1, length(TEST1), 1, 0, 0, "DDAF35A193617ABACC417349AE20413112E6FA4E89A97EA2" "0A9EEEE64B55D39A2192992A274FC1A836BA3C23A3FEEBBD" "454D4423643CE80E2A9AC94FA54CA49F" }, /* 2 */ { TEST2_2, length(TEST2_2), 1, 0, 0, D. Eastlake 3rd, T. Hansen [Page 96] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "8E959B75DAE313DA8CF4F72814FC143F8F7779C6EB9F7FA1" "7299AEADB6889018501D289E4900F7E4331B99DEC4B5433A" "C7D329EEB6DD26545E96E55B874BE909" }, /* 3 */ { TEST3, length(TEST3), 1000000, 0, 0, "E718483D0CE769644E2E42C7BC15B4638E1F98B13B204428" "5632A803AFA973EBDE0FF244877EA60A4CB0432CE577C31B" "EB009C5C2C49AA2E4EADB217AD8CC09B" }, /* 4 */ { TEST4, length(TEST4), 10, 0, 0, "89D05BA632C699C31231DED4FFC127D5A894DAD412C0E024" "DB872D1ABD2BA8141A0F85072A9BE1E2AA04CF33C765CB51" "0813A39CD5A84C4ACAA64D3F3FB7BAE9" }, /* 5 */ { "", 0, 0, 0xB0, 5, "D4EE29A9E90985446B913CF1D1376C836F4BE2C1CF3CADA0" "720A6BF4857D886A7ECB3C4E4C0FA8C7F95214E41DC1B0D2" "1B22A84CC03BF8CE4845F34DD5BDBAD4" }, /* 6 */ { "\xD0", 1, 1, 0, 0, "9992202938E882E73E20F6B69E68A0A7149090423D93C81B" "AB3F21678D4ACEEEE50E4E8CAFADA4C85A54EA8306826C4A" "D6E74CECE9631BFA8A549B4AB3FBBA15" }, /* 7 */ { TEST7_512, length(TEST7_512), 1, 0x80, 3, "ED8DC78E8B01B69750053DBB7A0A9EDA0FB9E9D292B1ED71" "5E80A7FE290A4E16664FD913E85854400C5AF05E6DAD316B" "7359B43E64F8BEC3C1F237119986BBB6" }, /* 8 */ { TEST8_512, length(TEST8_512), 1, 0, 0, "CB0B67A4B8712CD73C9AABC0B199E9269B20844AFB75ACBD" "D1C153C9828924C3DDEDAAFE669C5FDD0BC66F630F677398" "8213EB1B16F517AD0DE4B2F0C95C90F8" }, /* 9 */ { TEST9_512, length(TEST9_512), 1, 0x80, 3, "32BA76FC30EAA0208AEB50FFB5AF1864FDBF17902A4DC0A6" "82C61FCEA6D92B783267B21080301837F59DE79C6B337DB2" "526F8A0A510E5E53CAFED4355FE7C2F1" }, /* 10 */ { TEST10_512, length(TEST10_512), 1, 0, 0, "C665BEFB36DA189D78822D10528CBF3B12B3EEF726039909" "C1A16A270D48719377966B957A878E720584779A62825C18" "DA26415E49A7176A894E7510FD1451F5" } }, SHA512_SEED, { "2FBB1E7E00F746BA514FBC8C421F36792EC0E11FF5EFC3" "78E1AB0C079AA5F0F66A1E3EDBAEB4F9984BE14437123038A452004A5576" "8C1FD8EED49E4A21BEDCD0", "25CBE5A4F2C7B1D7EF07011705D50C62C5" "000594243EAFD1241FC9F3D22B58184AE2FEE38E171CF8129E29459C9BC2" "EF461AF5708887315F15419D8D17FE7949", "5B8B1F2687555CE2D7182B" "92E5C3F6C36547DA1C13DBB9EA4F73EA4CBBAF89411527906D35B1B06C1B" "6A8007D05EC66DF0A406066829EAB618BDE3976515AAFC", "46E36B007D" "19876CDB0B29AD074FE3C08CDD174D42169D6ABE5A1414B6E79707DF5877" "6A98091CF431854147BB6D3C66D43BFBC108FD715BDE6AA127C2B0E79F" } } }; /* Test arrays for HMAC. */ struct hmachash { D. Eastlake 3rd, T. Hansen [Page 97] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF const char *keyarray[5]; int keylength[5]; const char *dataarray[5]; int datalength[5]; const char *resultarray[5]; int resultlength[5]; } hmachashes[HMACTESTCOUNT] = { { /* 1 */ { "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" "\x0b\x0b\x0b\x0b\x0b" }, { 20 }, { "\x48\x69\x20\x54\x68\x65\x72\x65" /* "Hi There" */ }, { 8 }, { /* HMAC-SHA-1 */ "B617318655057264E28BC0B6FB378C8EF146BE00", /* HMAC-SHA-224 */ "896FB1128ABBDF196832107CD49DF33F47B4B1169912BA4F53684B22", /* HMAC-SHA-256 */ "B0344C61D8DB38535CA8AFCEAF0BF12B881DC200C9833DA726E9376C2E32" "CFF7", /* HMAC-SHA-384 */ "AFD03944D84895626B0825F4AB46907F15F9DADBE4101EC682AA034C7CEB" "C59CFAEA9EA9076EDE7F4AF152E8B2FA9CB6", /* HMAC-SHA-512 */ "87AA7CDEA5EF619D4FF0B4241A1D6CB02379F4E2CE4EC2787AD0B30545E1" "7CDEDAA833B7D6B8A702038B274EAEA3F4E4BE9D914EEB61F1702E696C20" "3A126854" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } }, { /* 2 */ { "\x4a\x65\x66\x65" /* "Jefe" */ }, { 4 }, { "\x77\x68\x61\x74\x20\x64\x6f\x20\x79\x61\x20\x77\x61\x6e\x74" "\x20\x66\x6f\x72\x20\x6e\x6f\x74\x68\x69\x6e\x67\x3f" /* "what do ya want for nothing?" */ }, { 28 }, { /* HMAC-SHA-1 */ "EFFCDF6AE5EB2FA2D27416D5F184DF9C259A7C79", /* HMAC-SHA-224 */ "A30E01098BC6DBBF45690F3A7E9E6D0F8BBEA2A39E6148008FD05E44", /* HMAC-SHA-256 */ "5BDCC146BF60754E6A042426089575C75A003F089D2739839DEC58B964EC" "3843", /* HMAC-SHA-384 */ "AF45D2E376484031617F78D2B58A6B1B9C7EF464F5A01B47E42EC3736322" "445E8E2240CA5E69E2C78B3239ECFAB21649", /* HMAC-SHA-512 */ "164B7A7BFCF819E2E395FBE73B56E0A387BD64222E831FD610270CD7EA25" "05549758BF75C05A994A6D034F65F8F0E6FDCAEAB1A34D4A6B4B636E070A" D. Eastlake 3rd, T. Hansen [Page 98] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "38BCE737" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } }, { /* 3 */ { "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa" }, { 20 }, { "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" "\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd\xdd" "\xdd\xdd\xdd\xdd\xdd" }, { 50 }, { /* HMAC-SHA-1 */ "125D7342B9AC11CD91A39AF48AA17B4F63F175D3", /* HMAC-SHA-224 */ "7FB3CB3588C6C1F6FFA9694D7D6AD2649365B0C1F65D69D1EC8333EA", /* HMAC-SHA-256 */ "773EA91E36800E46854DB8EBD09181A72959098B3EF8C122D9635514CED5" "65FE", /* HMAC-SHA-384 */ "88062608D3E6AD8A0AA2ACE014C8A86F0AA635D947AC9FEBE83EF4E55966" "144B2A5AB39DC13814B94E3AB6E101A34F27", /* HMAC-SHA-512 */ "FA73B0089D56A284EFB0F0756C890BE9B1B5DBDD8EE81A3655F83E33B227" "9D39BF3E848279A722C806B485A47E67C807B946A337BEE8942674278859" "E13292FB" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } }, { /* 4 */ { "\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d\x0e\x0f" "\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19" }, { 25 }, { "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" "\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd\xcd" "\xcd\xcd\xcd\xcd\xcd" }, { 50 }, { /* HMAC-SHA-1 */ "4C9007F4026250C6BC8414F9BF50C86C2D7235DA", /* HMAC-SHA-224 */ "6C11506874013CAC6A2ABC1BB382627CEC6A90D86EFC012DE7AFEC5A", /* HMAC-SHA-256 */ "82558A389A443C0EA4CC819899F2083A85F0FAA3E578F8077A2E3FF46729" "665B", /* HMAC-SHA-384 */ "3E8A69B7783C25851933AB6290AF6CA77A9981480850009CC5577C6E1F57" "3B4E6801DD23C4A7D679CCF8A386C674CFFB", D. Eastlake 3rd, T. Hansen [Page 99] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* HMAC-SHA-512 */ "B0BA465637458C6990E5A8C5F61D4AF7E576D97FF94B872DE76F8050361E" "E3DBA91CA5C11AA25EB4D679275CC5788063A5F19741120C4F2DE2ADEBEB" "10A298DD" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } }, { /* 5 */ { "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c" "\x0c\x0c\x0c\x0c\x0c" }, { 20 }, { "Test With Truncation" }, { 20 }, { /* HMAC-SHA-1 */ "4C1A03424B55E07FE7F27BE1", /* HMAC-SHA-224 */ "0E2AEA68A90C8D37C988BCDB9FCA6FA8", /* HMAC-SHA-256 */ "A3B6167473100EE06E0C796C2955552B", /* HMAC-SHA-384 */ "3ABF34C3503B2A23A46EFC619BAEF897", /* HMAC-SHA-512 */ "415FAD6271580A531D4179BC891D87A6" }, { 12, 16, 16, 16, 16 } }, { /* 6 */ { "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" }, { 80, 131 }, { "Test Using Larger Than Block-Size Key - Hash Key First" }, { 54 }, { /* HMAC-SHA-1 */ "AA4AE5E15272D00E95705637CE8A3B55ED402112", /* HMAC-SHA-224 */ "95E9A0DB962095ADAEBE9B2D6F0DBCE2D499F112F2D2B7273FA6870E", /* HMAC-SHA-256 */ "60E431591EE0B67F0D8A26AACBF5B77F8E0BC6213728C5140546040F0EE3" "7F54", /* HMAC-SHA-384 */ "4ECE084485813E9088D2C63A041BC5B44F9EF1012A2B588F3CD11F05033A" "C4C60C2EF6AB4030FE8296248DF163F44952", /* HMAC-SHA-512 */ "80B24263C7C1A3EBB71493C1DD7BE8B49B46D1F41B4AEEC1121B013783F8" D. Eastlake 3rd, T. Hansen [Page 100] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "F3526B56D037E05F2598BD0FD2215D6A1E5295E64F73F63F0AEC8B915A98" "5D786598" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } }, { /* 7 */ { "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" "\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa\xaa" }, { 80, 131 }, { "Test Using Larger Than Block-Size Key and " "Larger Than One Block-Size Data", "\x54\x68\x69\x73\x20\x69\x73\x20\x61\x20\x74\x65\x73\x74\x20" "\x75\x73\x69\x6e\x67\x20\x61\x20\x6c\x61\x72\x67\x65\x72\x20" "\x74\x68\x61\x6e\x20\x62\x6c\x6f\x63\x6b\x2d\x73\x69\x7a\x65" "\x20\x6b\x65\x79\x20\x61\x6e\x64\x20\x61\x20\x6c\x61\x72\x67" "\x65\x72\x20\x74\x68\x61\x6e\x20\x62\x6c\x6f\x63\x6b\x2d\x73" "\x69\x7a\x65\x20\x64\x61\x74\x61\x2e\x20\x54\x68\x65\x20\x6b" "\x65\x79\x20\x6e\x65\x65\x64\x73\x20\x74\x6f\x20\x62\x65\x20" "\x68\x61\x73\x68\x65\x64\x20\x62\x65\x66\x6f\x72\x65\x20\x62" "\x65\x69\x6e\x67\x20\x75\x73\x65\x64\x20\x62\x79\x20\x74\x68" "\x65\x20\x48\x4d\x41\x43\x20\x61\x6c\x67\x6f\x72\x69\x74\x68" "\x6d\x2e" /* "This is a test using a larger than block-size key and a " "larger than block-size data. The key needs to be hashed " "before being used by the HMAC algorithm." */ }, { 73, 152 }, { /* HMAC-SHA-1 */ "E8E99D0F45237D786D6BBAA7965C7808BBFF1A91", /* HMAC-SHA-224 */ "3A854166AC5D9F023F54D517D0B39DBD946770DB9C2B95C9F6F565D1", /* HMAC-SHA-256 */ "9B09FFA71B942FCB27635FBCD5B0E944BFDC63644F0713938A7F51535C3A" "35E2", /* HMAC-SHA-384 */ "6617178E941F020D351E2F254E8FD32C602420FEB0B8FB9ADCCEBB82461E" "99C5A678CC31E799176D3860E6110C46523E", /* HMAC-SHA-512 */ "E37B6A775DC87DBAA4DFA9F96E5E3FFDDEBD71F8867289865DF5A32D20CD" "C944B6022CAC3C4982B10D5EEB55C3E4DE15134676FB6DE0446065C97440" "FA8C6A58" }, { SHA1HashSize, SHA224HashSize, SHA256HashSize, SHA384HashSize, SHA512HashSize } } D. Eastlake 3rd, T. Hansen [Page 101] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF }; /* Test arrays for HKDF. */ struct hkdfhash { SHAversion whichSha; int ikmlength; const char *ikmarray; int saltlength; const char *saltarray; int infolength; const char *infoarray; int prklength; const char *prkarray; int okmlength; const char *okmarray; } hkdfhashes[HKDFTESTCOUNT] = { { /* RFC 5869 A.1. Test Case 1 */ SHA256, 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", 13, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c", 10, "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9", 32, "077709362C2E32DF0DDC3F0DC47BBA6390B6C73BB50F9C3122EC844A" "D7C2B3E5", 42, "3CB25F25FAACD57A90434F64D0362F2A2D2D0A90CF1A5A4C5DB02D56" "ECC4C5BF34007208D5B887185865" }, { /* RFC 5869 A.2. Test Case 2 */ SHA256, 80, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d" "\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b" "\x1c\x1d\x1e\x1f\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29" "\x2a\x2b\x2c\x2d\x2e\x2f\x30\x31\x32\x33\x34\x35\x36\x37" "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40\x41\x42\x43\x44\x45" "\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f", 80, "\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6a\x6b\x6c\x6d" "\x6e\x6f\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7a\x7b" "\x7c\x7d\x7e\x7f\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89" "\x8a\x8b\x8c\x8d\x8e\x8f\x90\x91\x92\x93\x94\x95\x96\x97" "\x98\x99\x9a\x9b\x9c\x9d\x9e\x9f\xa0\xa1\xa2\xa3\xa4\xa5" "\xa6\xa7\xa8\xa9\xaa\xab\xac\xad\xae\xaf", 80, "\xb0\xb1\xb2\xb3\xb4\xb5\xb6\xb7\xb8\xb9\xba\xbb\xbc\xbd" "\xbe\xbf\xc0\xc1\xc2\xc3\xc4\xc5\xc6\xc7\xc8\xc9\xca\xcb" "\xcc\xcd\xce\xcf\xd0\xd1\xd2\xd3\xd4\xd5\xd6\xd7\xd8\xd9" "\xda\xdb\xdc\xdd\xde\xdf\xe0\xe1\xe2\xe3\xe4\xe5\xe6\xe7" "\xe8\xe9\xea\xeb\xec\xed\xee\xef\xf0\xf1\xf2\xf3\xf4\xf5" "\xf6\xf7\xf8\xf9\xfa\xfb\xfc\xfd\xfe\xff", 32, "06A6B88C5853361A06104C9CEB35B45C" "EF760014904671014A193F40C15FC244", 82, "B11E398DC80327A1C8E7F78C596A4934" D. Eastlake 3rd, T. Hansen [Page 102] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "4F012EDA2D4EFAD8A050CC4C19AFA97C" "59045A99CAC7827271CB41C65E590E09" "DA3275600C2F09B8367793A9ACA3DB71" "CC30C58179EC3E87C14C01D5C1F3434F" "1D87" }, { /* RFC 5869 A.3. Test Case 3 */ SHA256, 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", 0, "", 0, "", 32, "19EF24A32C717B167F33A91D6F648BDF" "96596776AFDB6377AC434C1C293CCB04", 42, "8DA4E775A563C18F715F802A063C5A31" "B8A11F5C5EE1879EC3454E5F3C738D2D" "9D201395FAA4B61A96C8" }, { /* RFC 5869 A.4. Test Case 4 */ SHA1, 11, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", 13, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c", 10, "\xf0\xf1\xf2\xf3\xf4\xf5\xf6\xf7\xf8\xf9", 20, "9B6C18C432A7BF8F0E71C8EB88F4B30BAA2BA243", 42, "085A01EA1B10F36933068B56EFA5AD81" "A4F14B822F5B091568A9CDD4F155FDA2" "C22E422478D305F3F896" }, { /* RFC 5869 A.5. Test Case 5 */ SHA1, 80, "\x00\x01\x02\x03\x04\x05\x06\x07\x08\x09\x0a\x0b\x0c\x0d" "\x0e\x0f\x10\x11\x12\x13\x14\x15\x16\x17\x18\x19\x1a\x1b" "\x1c\x1d\x1e\x1f\x20\x21\x22\x23\x24\x25\x26\x27\x28\x29" "\x2a\x2b\x2c\x2d\x2e\x2f\x30\x31\x32\x33\x34\x35\x36\x37" "\x38\x39\x3a\x3b\x3c\x3d\x3e\x3f\x40\x41\x42\x43\x44\x45" "\x46\x47\x48\x49\x4a\x4b\x4c\x4d\x4e\x4f", 80, "\x60\x61\x62\x63\x64\x65\x66\x67\x68\x69\x6A\x6B\x6C\x6D" "\x6E\x6F\x70\x71\x72\x73\x74\x75\x76\x77\x78\x79\x7A\x7B" "\x7C\x7D\x7E\x7F\x80\x81\x82\x83\x84\x85\x86\x87\x88\x89" "\x8A\x8B\x8C\x8D\x8E\x8F\x90\x91\x92\x93\x94\x95\x96\x97" "\x98\x99\x9A\x9B\x9C\x9D\x9E\x9F\xA0\xA1\xA2\xA3\xA4\xA5" "\xA6\xA7\xA8\xA9\xAA\xAB\xAC\xAD\xAE\xAF", 80, "\xB0\xB1\xB2\xB3\xB4\xB5\xB6\xB7\xB8\xB9\xBA\xBB\xBC\xBD" "\xBE\xBF\xC0\xC1\xC2\xC3\xC4\xC5\xC6\xC7\xC8\xC9\xCA\xCB" "\xCC\xCD\xCE\xCF\xD0\xD1\xD2\xD3\xD4\xD5\xD6\xD7\xD8\xD9" "\xDA\xDB\xDC\xDD\xDE\xDF\xE0\xE1\xE2\xE3\xE4\xE5\xE6\xE7" "\xE8\xE9\xEA\xEB\xEC\xED\xEE\xEF\xF0\xF1\xF2\xF3\xF4\xF5" "\xF6\xF7\xF8\xF9\xFA\xFB\xFC\xFD\xFE\xFF", 20, "8ADAE09A2A307059478D309B26C4115A224CFAF6", 82, "0BD770A74D1160F7C9F12CD5912A06EB" D. Eastlake 3rd, T. Hansen [Page 103] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "FF6ADCAE899D92191FE4305673BA2FFE" "8FA3F1A4E5AD79F3F334B3B202B2173C" "486EA37CE3D397ED034C7F9DFEB15C5E" "927336D0441F4C4300E2CFF0D0900B52" "D3B4" }, { /* RFC 5869 A.6. Test Case 6 */ SHA1, 22, "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b" "\x0b\x0b\x0b\x0b\x0b\x0b\x0b\x0b", 0, "", 0, "", 20, "DA8C8A73C7FA77288EC6F5E7C297786AA0D32D01", 42, "0AC1AF7002B3D761D1E55298DA9D0506" "B9AE52057220A306E07B6B87E8DF21D0" "EA00033DE03984D34918" }, { /* RFC 5869 A.7. Test Case 7. */ SHA1, 22, "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c" "\x0c\x0c\x0c\x0c\x0c\x0c\x0c\x0c", 0, 0, 0, "", 20, "2ADCCADA18779E7C2077AD2EB19D3F3E731385DD", 42, "2C91117204D745F3500D636A62F64F0A" "B3BAE548AA53D423B0D1F27EBBA6F5E5" "673A081D70CCE7ACFC48" } }; /* * Check the hash value against the expected string, expressed in hex */ static const char hexdigits[ ] = "0123456789ABCDEF"; int checkmatch(const unsigned char *hashvalue, const char *hexstr, int hashsize) { int i; for (i = 0; i < hashsize; ++i) { if (*hexstr++ != hexdigits[(hashvalue[i] >> 4) & 0xF]) return 0; if (*hexstr++ != hexdigits[hashvalue[i] & 0xF]) return 0; } return 1; } /* * Print the string, converting non-printable characters to "." */ void printstr(const char *str, int len) D. Eastlake 3rd, T. Hansen [Page 104] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF { for ( ; len-- > 0; str++) putchar(isprint((unsigned char)*str) ? *str : '.'); } /* * Print the string, converting all characters to hex "## ". */ void printxstr(const char *str, int len) { char *sep = ""; for ( ; len-- > 0; str++) { printf("%s%c%c", sep, hexdigits[(*str >> 4) & 0xF], hexdigits[*str & 0xF]); sep = " "; } } /* * Print a usage message. */ void usage(const char *argv0) { fprintf(stderr, "Usage:\n" "Common options: [-h hash] [-w|-x|-6] [-H]\n" "Hash a string:\n" "\t%s [-S expectedresult] -s hashstr [-k key] " "[-i info -L okm-len]\n" "Hash a file:\n" "\t%s [-S expectedresult] -f file [-k key] " "[-i info -L okm-len]\n" "Hash a file, ignoring whitespace:\n" "\t%s [-S expectedresult] -F file [-k key] " "[-i info -L okm-len]\n" "Additional bits to add in: [-B bitcount -b bits]\n" "(If -k,-i&-L are used, run HKDF-SHA###.\n" " If -k is used, but not -i&-L, run HMAC-SHA###.\n" " Otherwise, run SHA###.)\n" "Standard tests:\n" "\t%s [-m | -d] [-l loopcount] [-t test#] [-e]\n" "\t\t[-r randomseed] [-R randomloop-count] " "[-p] [-P|-X]\n" "-h\thash to test: " "0|SHA1, 1|SHA224, 2|SHA256, 3|SHA384, 4|SHA512\n" "-m\tperform hmac standard tests\n" "-k\tkey for hmac test\n" "-d\tperform hkdf standard tests\n" "-t\ttest case to run, 1-10\n" "-l\thow many times to run the test\n" D. Eastlake 3rd, T. Hansen [Page 105] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF "-e\ttest error returns\n" "-p\tdo not print results\n" "-P\tdo not print PASSED/FAILED\n" "-X\tprint FAILED, but not PASSED\n" "-r\tseed for random test\n" "-R\thow many times to run random test\n" "-s\tstring to hash\n" "-S\texpected result of hashed string, in hex\n" "-w\toutput hash in raw format\n" "-x\toutput hash in hex format\n" "-6\toutput hash in base64 format\n" "-B\t# extra bits to add in after string or file input\n" "-b\textra bits to add (high order bits of #, 0# or 0x#)\n" "-H\tinput hashstr or randomseed is in hex\n" , argv0, argv0, argv0, argv0); exit(1); } /* * Print the results and PASS/FAIL. */ void printResult(uint8_t *Message_Digest, int hashsize, const char *hashname, const char *testtype, const char *testname, const char *resultarray, int printResults, int printPassFail) { int i, k; if (printResults == PRINTTEXT) { printf("\nhashsize=%d\n", hashsize); putchar('\t'); for (i = 0; i < hashsize; ++i) { putchar(hexdigits[(Message_Digest[i] >> 4) & 0xF]); putchar(hexdigits[Message_Digest[i] & 0xF]); putchar(' '); } putchar('\n'); } else if (printResults == PRINTRAW) { fwrite(Message_Digest, 1, hashsize, stdout); } else if (printResults == PRINTHEX) { for (i = 0; i < hashsize; ++i) { putchar(hexdigits[(Message_Digest[i] >> 4) & 0xF]); putchar(hexdigits[Message_Digest[i] & 0xF]); } putchar('\n'); } else if (printResults == PRINTBASE64) { unsigned char b; char *sm = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz" "0123456789+/"; for (i = 0; i < hashsize; i += 3) { putchar(sm[Message_Digest[i] >> 2]); b = (Message_Digest[i] & 0x03) << 4; D. Eastlake 3rd, T. Hansen [Page 106] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF if (i+1 < hashsize) b |= Message_Digest[i+1] >> 4; putchar(sm[b]); if (i+1 < hashsize) { b = (Message_Digest[i+1] & 0x0f) << 2; if (i+2 < hashsize) b |= Message_Digest[i+2] >> 6; putchar(sm[b]); } else putchar('='); if (i+2 < hashsize) putchar(sm[Message_Digest[i+2] & 0x3f]); else putchar('='); } putchar('\n'); } if (printResults && resultarray) { printf(" Should match:\n\t"); for (i = 0, k = 0; i < hashsize; i++, k += 2) { putchar(resultarray[k]); putchar(resultarray[k+1]); putchar(' '); } putchar('\n'); } if (printPassFail && resultarray) { int ret = checkmatch(Message_Digest, resultarray, hashsize); if ((printPassFail == PRINTPASSFAIL) || !ret) printf("%s %s %s: %s\n", hashname, testtype, testname, ret ? "PASSED" : "FAILED"); } } /* * Exercise a hash series of functions. The input is the testarray, * repeated repeatcount times, followed by the extrabits. If the * result is known, it is in resultarray in uppercase hex. */ int hash(int testno, int loopno, int hashno, const char *testarray, int length, long repeatcount, int numberExtrabits, int extrabits, const unsigned char *keyarray, int keylen, const unsigned char *info, int infolen, int okmlen, const char *resultarray, int hashsize, int printResults, int printPassFail) { USHAContext sha; HMACContext hmac; HKDFContext hkdf; int err, i; uint8_t Message_Digest_Buf[USHAMaxHashSize]; uint8_t *Message_Digest = Message_Digest_Buf; char buf[20]; D. Eastlake 3rd, T. Hansen [Page 107] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF if (printResults == PRINTTEXT) { printf("\nTest %d: Iteration %d, Repeat %ld\n\t'", testno+1, loopno, repeatcount); printstr(testarray, length); printf("'\n\t'"); printxstr(testarray, length); printf("'\n"); printf(" Length=%d bytes (%d bits), ", length, length * 8); printf("ExtraBits %d: %2.2x\n", numberExtrabits, extrabits); } if (info) Message_Digest = malloc(okmlen); memset(&sha, '\343', sizeof(sha)); /* force bad data into struct */ memset(&hmac, '\343', sizeof(hmac)); memset(&hkdf, '\343', sizeof(hkdf)); err = info ? hkdfReset(&hkdf, hashes[hashno].whichSha, keyarray, keylen) : keyarray ? hmacReset(&hmac, hashes[hashno].whichSha, keyarray, keylen) : USHAReset(&sha, hashes[hashno].whichSha); if (err != shaSuccess) { fprintf(stderr, "hash(): %sReset Error %d.\n", info ? "hkdf" : keyarray ? "hmac" : "sha", err); return err; } for (i = 0; i < repeatcount; ++i) { err = info ? hkdfInput(&hkdf, (const uint8_t *)testarray, length) : keyarray ? hmacInput(&hmac, (const uint8_t *) testarray, length) : USHAInput(&sha, (const uint8_t *) testarray, length); if (err != shaSuccess) { fprintf(stderr, "hash(): %sInput Error %d.\n", info ? "hkdf" : keyarray ? "hmac" : "sha", err); return err; } } if (numberExtrabits > 0) { err = info ? hkdfFinalBits(&hkdf, extrabits, numberExtrabits) : keyarray ? hmacFinalBits(&hmac, (uint8_t) extrabits, numberExtrabits) : USHAFinalBits(&sha, (uint8_t) extrabits, numberExtrabits); if (err != shaSuccess) { fprintf(stderr, "hash(): %sFinalBits Error %d.\n", info ? "hkdf" : keyarray ? "hmac" : "sha", err); return err; } D. Eastlake 3rd, T. Hansen [Page 108] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF } err = info ? hkdfResult(&hkdf, 0, info, infolen, Message_Digest, okmlen) : keyarray ? hmacResult(&hmac, Message_Digest) : USHAResult(&sha, Message_Digest); if (err != shaSuccess) { fprintf(stderr, "hash(): %s Result Error %d, could not compute " "message digest.\n", info ? "hkdf" : keyarray ? "hmac" : "sha", err); return err; } sprintf(buf, "%d", testno+1); printResult(Message_Digest, info ? okmlen : hashsize, hashes[hashno].name, info ? "hkdf standard test" : keyarray ? "hmac standard test" : "sha standard test", buf, resultarray, printResults, printPassFail); return err; } /* * Exercise an HKDF series. The input is the testarray, * repeated repeatcount times, followed by the extrabits. If the * result is known, it is in resultarray in uppercase hex. */ int hashHkdf(int testno, int loopno, int hashno, int printResults, int printPassFail) { int err; unsigned char prk[USHAMaxHashSize+1]; uint8_t okm[255 * USHAMaxHashSize+1]; char buf[20]; if (printResults == PRINTTEXT) { printf("\nTest %d: Iteration %d\n\tSALT\t'", testno+1, loopno); printxstr(hkdfhashes[testno].saltarray, hkdfhashes[testno].saltlength); printf("'\n\tIKM\t'"); printxstr(hkdfhashes[testno].ikmarray, hkdfhashes[testno].ikmlength); printf("'\n\tINFO\t'"); printxstr(hkdfhashes[testno].infoarray, hkdfhashes[testno].infolength); printf("'\n"); printf(" L=%d bytes\n", hkdfhashes[testno].okmlength); } /* Run hkdf() against the test vectors */ D. Eastlake 3rd, T. Hansen [Page 109] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF err = hkdf(hkdfhashes[testno].whichSha, (const uint8_t *) hkdfhashes[testno].saltarray, hkdfhashes[testno].saltlength, (const uint8_t *) hkdfhashes[testno].ikmarray, hkdfhashes[testno].ikmlength, (const uint8_t *) hkdfhashes[testno].infoarray, hkdfhashes[testno].infolength, okm, hkdfhashes[testno].okmlength); if (err != shaSuccess) { fprintf(stderr, "hashHkdf(): hkdf Error %d.\n", err); return err; } sprintf(buf, "hkdf %d", testno+1); printResult(okm, hkdfhashes[testno].okmlength, USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", buf, hkdfhashes[testno].okmarray, printResults, printPassFail); /* Now run hkdfExtract() by itself against the test vectors */ /* to verify the intermediate results. */ err = hkdfExtract(hkdfhashes[testno].whichSha, (const uint8_t *) hkdfhashes[testno].saltarray, hkdfhashes[testno].saltlength, (const uint8_t *) hkdfhashes[testno].ikmarray, hkdfhashes[testno].ikmlength, prk); if (err != shaSuccess) { fprintf(stderr, "hashHkdf(): hkdfExtract Error %d.\n", err); return err; } sprintf(buf, "hkdfExtract %d", testno+1); printResult(prk, USHAHashSize(hkdfhashes[testno].whichSha), USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", buf, hkdfhashes[testno].prkarray, printResults, printPassFail); /* Now run hkdfExpand() by itself against the test vectors */ /* using the intermediate results from hkdfExtract. */ err = hkdfExpand(hkdfhashes[testno].whichSha, prk, USHAHashSize(hkdfhashes[testno].whichSha), (const uint8_t *)hkdfhashes[testno].infoarray, hkdfhashes[testno].infolength, okm, hkdfhashes[testno].okmlength); if (err != shaSuccess) { fprintf(stderr, "hashHkdf(): hkdfExpand Error %d.\n", err); return err; } sprintf(buf, "hkdfExpand %d", testno+1); printResult(okm, hkdfhashes[testno].okmlength, USHAHashName(hkdfhashes[testno].whichSha), "hkdf standard test", buf, hkdfhashes[testno].okmarray, printResults, printPassFail); return err; } D. Eastlake 3rd, T. Hansen [Page 110] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF /* * Exercise a hash series of functions. The input is a filename. * If the result is known, it is in resultarray in uppercase hex. */ int hashfile(int hashno, const char *hashfilename, int bits, int bitcount, int skipSpaces, const unsigned char *keyarray, int keylen, const unsigned char *info, int infolen, int okmlen, const char *resultarray, int hashsize, int printResults, int printPassFail) { USHAContext sha; HMACContext hmac; HKDFContext hkdf; int err, nread, c; unsigned char buf[4096]; uint8_t Message_Digest_Buf[USHAMaxHashSize]; uint8_t *Message_Digest = Message_Digest_Buf; unsigned char cc; FILE *hashfp = (strcmp(hashfilename, "-") == 0) ? stdin : fopen(hashfilename, "r"); if (!hashfp) { fprintf(stderr, "cannot open file '%s'\n", hashfilename); return shaStateError; } if (info) Message_Digest = malloc(okmlen); memset(&sha, '\343', sizeof(sha)); /* force bad data into struct */ memset(&hmac, '\343', sizeof(hmac)); memset(&hkdf, '\343', sizeof(hkdf)); err = info ? hkdfReset(&hkdf, hashes[hashno].whichSha, keyarray, keylen) : keyarray ? hmacReset(&hmac, hashes[hashno].whichSha, keyarray, keylen) : USHAReset(&sha, hashes[hashno].whichSha); if (err != shaSuccess) { fprintf(stderr, "hashfile(): %sReset Error %d.\n", info ? "hkdf" : keyarray ? "hmac" : "sha", err); return err; } if (skipSpaces) while ((c = getc(hashfp)) != EOF) { if (!isspace(c)) { cc = (unsigned char)c; err = info ? hkdfInput(&hkdf, &cc, 1) : keyarray ? hmacInput(&hmac, &cc, 1) : USHAInput(&sha, &cc, 1); if (err != shaSuccess) { fprintf(stderr, "hashfile(): %sInput Error %d.\n", D. Eastlake 3rd, T. Hansen [Page 111] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF info ? "hkdf" : keyarray ? "hmac" : "sha", err); if (hashfp != stdin) fclose(hashfp); return err; } } } else while ((nread = fread(buf, 1, sizeof(buf), hashfp)) > 0) { err = info ? hkdfInput(&hkdf, buf, nread) : keyarray ? hmacInput(&hmac, buf, nread) : USHAInput(&sha, buf, nread); if (err != shaSuccess) { fprintf(stderr, "hashfile(): %s Error %d.\n", info ? "hkdf" : keyarray ? "hmacInput" : "shaInput", err); if (hashfp != stdin) fclose(hashfp); return err; } } if (bitcount > 0) err = info ? hkdfFinalBits(&hkdf, bits, bitcount) : keyarray ? hmacFinalBits(&hmac, bits, bitcount) : USHAFinalBits(&sha, bits, bitcount); if (err != shaSuccess) { fprintf(stderr, "hashfile(): %s Error %d.\n", info ? "hkdf" : keyarray ? "hmacFinalBits" : "shaFinalBits", err); if (hashfp != stdin) fclose(hashfp); return err; } err = info ? hkdfResult(&hkdf, 0, info, infolen, Message_Digest, okmlen) : keyarray ? hmacResult(&hmac, Message_Digest) : USHAResult(&sha, Message_Digest); if (err != shaSuccess) { fprintf(stderr, "hashfile(): %s Error %d.\n", info ? "hkdf" : keyarray ? "hmacResult" : "shaResult", err); if (hashfp != stdin) fclose(hashfp); return err; } printResult(Message_Digest, info ? okmlen : hashsize, hashes[hashno].name, "file", hashfilename, resultarray, printResults, printPassFail); if (hashfp != stdin) fclose(hashfp); if (info) free(Message_Digest); D. Eastlake 3rd, T. Hansen [Page 112] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF return err; } /* * Exercise a hash series of functions through multiple permutations. * The input is an initial seed. That seed is replicated 3 times. * For 1000 rounds, the previous three results are used as the input. * This result is then checked, and used to seed the next cycle. * If the result is known, it is in resultarrays in uppercase hex. */ void randomtest(int hashno, const char *seed, int hashsize, const char **resultarrays, int randomcount, int printResults, int printPassFail) { int i, j; char buf[20]; unsigned char SEED[USHAMaxHashSize], MD[1003][USHAMaxHashSize]; /* INPUT: Seed - A random seed n bits long */ memcpy(SEED, seed, hashsize); if (printResults == PRINTTEXT) { printf("%s random test seed= '", hashes[hashno].name); printxstr(seed, hashsize); printf("'\n"); } for (j = 0; j < randomcount; j++) { /* MD0 = MD1 = MD2 = Seed; */ memcpy(MD[0], SEED, hashsize); memcpy(MD[1], SEED, hashsize); memcpy(MD[2], SEED, hashsize); for (i=3; i<1003; i++) { /* Mi = MDi-3 || MDi-2 || MDi-1; */ USHAContext Mi; memset(&Mi, '\343', sizeof(Mi)); /* force bad data into struct */ USHAReset(&Mi, hashes[hashno].whichSha); USHAInput(&Mi, MD[i-3], hashsize); USHAInput(&Mi, MD[i-2], hashsize); USHAInput(&Mi, MD[i-1], hashsize); /* MDi = SHA(Mi); */ USHAResult(&Mi, MD[i]); } /* MDj = Seed = MDi; */ memcpy(SEED, MD[i-1], hashsize); /* OUTPUT: MDj */ sprintf(buf, "%d", j); printResult(SEED, hashsize, hashes[hashno].name, "random test", buf, resultarrays ? resultarrays[j] : 0, printResults, (j < RANDOMCOUNT) ? printPassFail : 0); D. Eastlake 3rd, T. Hansen [Page 113] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF } } /* * Look up a hash name. */ int findhash(const char *argv0, const char *opt) { int i; const char *names[HASHCOUNT][2] = { { "0", "sha1" }, { "1", "sha224" }, { "2", "sha256" }, { "3", "sha384" }, { "4", "sha512" } }; for (i = 0; i < HASHCOUNT; i++) if ((strcmp(opt, names[i][0]) == 0) || (scasecmp(opt, names[i][1]) == 0)) return i; fprintf(stderr, "%s: Unknown hash name: '%s'\n", argv0, opt); usage(argv0); return 0; } /* * Run some tests that should invoke errors. */ void testErrors(int hashnolow, int hashnohigh, int printResults, int printPassFail) { USHAContext usha; uint8_t Message_Digest[USHAMaxHashSize]; int hashno, err; for (hashno = hashnolow; hashno <= hashnohigh; hashno++) { memset(&usha, '\343', sizeof(usha)); /* force bad data */ USHAReset(&usha, hashno); USHAResult(&usha, Message_Digest); err = USHAInput(&usha, (const unsigned char *)"foo", 3); if (printResults == PRINTTEXT) printf ("\nError %d. Should be %d.\n", err, shaStateError); if ((printPassFail == PRINTPASSFAIL) || ((printPassFail == PRINTFAIL) && (err != shaStateError))) printf("%s se: %s\n", hashes[hashno].name, (err == shaStateError) ? "PASSED" : "FAILED"); err = USHAFinalBits(&usha, 0x80, 3); if (printResults == PRINTTEXT) printf ("\nError %d. Should be %d.\n", err, shaStateError); if ((printPassFail == PRINTPASSFAIL) || D. Eastlake 3rd, T. Hansen [Page 114] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF ((printPassFail == PRINTFAIL) && (err != shaStateError))) printf("%s se: %s\n", hashes[hashno].name, (err == shaStateError) ? "PASSED" : "FAILED"); err = USHAReset(0, hashes[hashno].whichSha); if (printResults == PRINTTEXT) printf("\nError %d. Should be %d.\n", err, shaNull); if ((printPassFail == PRINTPASSFAIL) || ((printPassFail == PRINTFAIL) && (err != shaNull))) printf("%s usha null: %s\n", hashes[hashno].name, (err == shaNull) ? "PASSED" : "FAILED"); switch (hashno) { case SHA1: err = SHA1Reset(0); break; case SHA224: err = SHA224Reset(0); break; case SHA256: err = SHA256Reset(0); break; case SHA384: err = SHA384Reset(0); break; case SHA512: err = SHA512Reset(0); break; } if (printResults == PRINTTEXT) printf("\nError %d. Should be %d.\n", err, shaNull); if ((printPassFail == PRINTPASSFAIL) || ((printPassFail == PRINTFAIL) && (err != shaNull))) printf("%s sha null: %s\n", hashes[hashno].name, (err == shaNull) ? "PASSED" : "FAILED"); } } /* replace a hex string in place with its value */ int unhexStr(char *hexstr) { char *o = hexstr; int len = 0, nibble1 = 0, nibble2 = 0; if (!hexstr) return 0; for ( ; *hexstr; hexstr++) { if (isalpha((int)(unsigned char)(*hexstr))) { nibble1 = tolower(*hexstr) - 'a' + 10; } else if (isdigit((int)(unsigned char)(*hexstr))) { nibble1 = *hexstr - '0'; } else { printf("\nError: bad hex character '%c'\n", *hexstr); } if (!*++hexstr) break; if (isalpha((int)(unsigned char)(*hexstr))) { nibble2 = tolower(*hexstr) - 'a' + 10; } else if (isdigit((int)(unsigned char)(*hexstr))) { nibble2 = *hexstr - '0'; } else { printf("\nError: bad hex character '%c'\n", *hexstr); } D. Eastlake 3rd, T. Hansen [Page 115] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF *o++ = (char)((nibble1 << 4) | nibble2); len++; } return len; } int main(int argc, char **argv) { int i, err; int loopno, loopnohigh = 1; int hashno, hashnolow = 0, hashnohigh = HASHCOUNT - 1; int testno, testnolow = 0, testnohigh; int ntestnohigh = 0; int printResults = PRINTTEXT; int printPassFail = 1; int checkErrors = 0; char *hashstr = 0; int hashlen = 0; const char *resultstr = 0; char *randomseedstr = 0; int runHmacTests = 0; int runHkdfTests = 0; char *hmacKey = 0; int hmaclen = 0; char *info = 0; int infolen = 0, okmlen = 0; int randomcount = RANDOMCOUNT; const char *hashfilename = 0; const char *hashFilename = 0; int extrabits = 0, numberExtrabits = 0; int strIsHex = 0; while ((i = getopt(argc, argv, "6b:B:def:F:h:i:Hk:l:L:mpPr:R:s:S:t:wxX")) != -1) switch (i) { case 'b': extrabits = strtol(optarg, 0, 0); break; case 'B': numberExtrabits = atoi(optarg); break; case 'd': runHkdfTests = 1; break; case 'e': checkErrors = 1; break; case 'f': hashfilename = optarg; break; case 'F': hashFilename = optarg; break; case 'h': hashnolow = hashnohigh = findhash(argv[0], optarg); break; case 'H': strIsHex = 1; break; case 'i': info = optarg; infolen = strlen(optarg); break; case 'k': hmacKey = optarg; hmaclen = strlen(optarg); break; case 'l': loopnohigh = atoi(optarg); break; case 'L': okmlen = strtol(optarg, 0, 0); break; case 'm': runHmacTests = 1; break; case 'P': printPassFail = 0; break; D. Eastlake 3rd, T. Hansen [Page 116] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF case 'p': printResults = PRINTNONE; break; case 'R': randomcount = atoi(optarg); break; case 'r': randomseedstr = optarg; break; case 's': hashstr = optarg; hashlen = strlen(hashstr); break; case 'S': resultstr = optarg; break; case 't': testnolow = ntestnohigh = atoi(optarg) - 1; break; case 'w': printResults = PRINTRAW; break; case 'x': printResults = PRINTHEX; break; case 'X': printPassFail = 2; break; case '6': printResults = PRINTBASE64; break; default: usage(argv[0]); } if (strIsHex) { hashlen = unhexStr(hashstr); unhexStr(randomseedstr); hmaclen = unhexStr(hmacKey); infolen = unhexStr(info); } testnohigh = (ntestnohigh != 0) ? ntestnohigh: runHmacTests ? (HMACTESTCOUNT-1) : runHkdfTests ? (HKDFTESTCOUNT-1) : (TESTCOUNT-1); if ((testnolow < 0) || (testnohigh >= (runHmacTests ? HMACTESTCOUNT : TESTCOUNT)) || (hashnolow < 0) || (hashnohigh >= HASHCOUNT) || (hashstr && (testnolow == testnohigh)) || (randomcount < 0) || (resultstr && (!hashstr && !hashfilename && !hashFilename)) || ((runHmacTests || hmacKey) && randomseedstr) || (hashfilename && hashFilename) || (info && ((infolen <= 0) || (okmlen <= 0))) || (info && !hmacKey)) usage(argv[0]); /* * Perform SHA/HMAC tests */ for (hashno = hashnolow; hashno <= hashnohigh; ++hashno) { if (printResults == PRINTTEXT) printf("Hash %s\n", hashes[hashno].name); err = shaSuccess; for (loopno = 1; (loopno <= loopnohigh) && (err == shaSuccess); ++loopno) { if (hashstr) err = hash(0, loopno, hashno, hashstr, hashlen, 1, numberExtrabits, extrabits, (const unsigned char *)hmacKey, hmaclen, (const uint8_t *) info, infolen, okmlen, resultstr, hashes[hashno].hashsize, printResults, printPassFail); D. Eastlake 3rd, T. Hansen [Page 117] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF else if (randomseedstr) randomtest(hashno, randomseedstr, hashes[hashno].hashsize, 0, randomcount, printResults, printPassFail); else if (hashfilename) err = hashfile(hashno, hashfilename, extrabits, numberExtrabits, 0, (const unsigned char *)hmacKey, hmaclen, (const uint8_t *) info, infolen, okmlen, resultstr, hashes[hashno].hashsize, printResults, printPassFail); else if (hashFilename) err = hashfile(hashno, hashFilename, extrabits, numberExtrabits, 1, (const unsigned char *)hmacKey, hmaclen, (const uint8_t *) info, infolen, okmlen, resultstr, hashes[hashno].hashsize, printResults, printPassFail); else /* standard tests */ { for (testno = testnolow; (testno <= testnohigh) && (err == shaSuccess); ++testno) { if (runHmacTests) { err = hash(testno, loopno, hashno, hmachashes[testno].dataarray[hashno] ? hmachashes[testno].dataarray[hashno] : hmachashes[testno].dataarray[1] ? hmachashes[testno].dataarray[1] : hmachashes[testno].dataarray[0], hmachashes[testno].datalength[hashno] ? hmachashes[testno].datalength[hashno] : hmachashes[testno].datalength[1] ? hmachashes[testno].datalength[1] : hmachashes[testno].datalength[0], 1, 0, 0, (const unsigned char *)( hmachashes[testno].keyarray[hashno] ? hmachashes[testno].keyarray[hashno] : hmachashes[testno].keyarray[1] ? hmachashes[testno].keyarray[1] : hmachashes[testno].keyarray[0]), hmachashes[testno].keylength[hashno] ? hmachashes[testno].keylength[hashno] : hmachashes[testno].keylength[1] ? hmachashes[testno].keylength[1] : hmachashes[testno].keylength[0], 0, 0, 0, hmachashes[testno].resultarray[hashno], hmachashes[testno].resultlength[hashno], D. Eastlake 3rd, T. Hansen [Page 118] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF printResults, printPassFail); } else if (runHkdfTests) { err = hashHkdf(testno, loopno, hashno, printResults, printPassFail); } else { /* sha tests */ err = hash(testno, loopno, hashno, hashes[hashno].tests[testno].testarray, hashes[hashno].tests[testno].length, hashes[hashno].tests[testno].repeatcount, hashes[hashno].tests[testno].numberExtrabits, hashes[hashno].tests[testno].extrabits, 0, 0, 0, 0, 0, hashes[hashno].tests[testno].resultarray, hashes[hashno].hashsize, printResults, printPassFail); } } if (!runHmacTests && !runHkdfTests) { randomtest(hashno, hashes[hashno].randomtest, hashes[hashno].hashsize, hashes[hashno].randomresults, RANDOMCOUNT, printResults, printPassFail); } } } } /* Test some error returns */ if (checkErrors) { testErrors(hashnolow, hashnohigh, printResults, printPassFail); } return 0; } /* * Compare two strings, case independently. * Equivalent to strcasecmp() found on some systems. */ int scasecmp(const char *s1, const char *s2) { for (;;) { char u1 = tolower(*s1++); char u2 = tolower(*s2++); if (u1 != u2) return u1 - u2; if (u1 == '\0') return 0; } } D. Eastlake 3rd, T. Hansen [Page 119] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 9. IANA Considerations This document requires no IANA Actions. The RFC Editor should delete this section before publication. 10. Security Considerations This document is intended to provide convenient open source access by the Internet community to the United States of America Federal Information Processing Standard Secure Hash Algorithms (SHAs) [FIPS 180-2], HMACs based thereon, and HKDF. No independent assertion of the security of these functions by the authors for any particular use is intended. 11. Acknowledgements Thanks for the corrections to [RFC4634] that were provided by Alfred Hoenes and Jan Andres and to Alfred's comments on the drafts hereof. D. Eastlake 3rd, T. Hansen [Page 120] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF 12. References RFC Editor Note: All occurances of "RFC NNNN" should be edited to replace "NNNN" with this documents RFC number and this note should be deleted. 12.1 Normative References [RFC2104] - Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: Keyed- Hashing for Message Authentication", RFC 2104, February 1997. [RFC2119] - Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC5869] - Krawczyk, H. and P. Eronen, "HMAC-based Extract-and- Expand Key Derivation Function (HKDF)", RFC 5869, May 2010. [SHS] - "Secure Hash Standard", United States of American, National Institute of Science and Technology, Federal Information Processing Standard (FIPS) 180-3, http://csrc.nist.gov/publications/fips/fips180- 3/fips180-3_final.pdf. 12.2 Informative References [RFC2202] - P. Cheng, R. Glenn, "Test Cases for HMAC-MD5 and HMAC- SHA-1", September 1997. [RFC3174] - D. Eastlake 3rd, P. Jones, "US Secure Hash Algorithm 1 (SHA1)", September 2001. [RFC3874] - R. Housley, "A 224-bit One-way Hash Function: SHA-224", September 2004. [RFC4055] - Schaad, J., Kaliski, B., and R. Housley, "Additional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 4055, June 2005 [RFC4086] - D. Eastlake, S. Crocker, J. Schiller, "Randomness Requirements for Security", May 2005. [RFC4231] - M. Nystrom, "Identifiers and Test Vectors for HMAC- SHA-224, HMAC-SHA-256, HMAC-SHA-384, and HMAC-SHA-512", December 2005. D. Eastlake 3rd, T. Hansen [Page 121] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF [RFC4634] - Eastlake 3rd, D. and T. Hansen, "US Secure Hash Algorithms (SHA and HMAC-SHA)", RFC 4634, July 2006. [SHAVS] - "The Secure Hash Algorithm Validation System (SHAVS)", http://csrc.nist.gov/cryptval/shs/SHAVS.pdf. D. Eastlake 3rd, T. Hansen [Page 122] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Appendix: Changes from RFC 4634 The following changes were made to RFC 4634 to produce this document: 1. Add code for HKDF and brief text about HKDF with pointer to [RFC5869]. 2. Fix numerous errata filed against [RFC4634] as below. Note that in no case did the old code return an incorrect hash value. 2.a Correct some of the error return values which has erroneously been "shaNull" to the correct "shaInputTooLong" error. 2.b Update comments and variable names within the code for consistency and clarity and other editorial changes. 2.c The previous code for SHA-384 and SHA-512 would stop after 2^93 bytes (2^96 bits). The fixed code handles up to 2^125 bytes (2^128 bits). 2.d Add additional error checking. 3. Update boilerplate, remove special license in [RFC4634] as new boilerplate mandates simplified BSD license. 4. Repalce MIT version of getopt with new code to satisfy IETF incoming and outgoing license restrictions. 5. Other assorted editorial improvements. D. Eastlake 3rd, T. Hansen [Page 123] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Appendix Z: Edit History RFC Editor, Please delete this Appendix Z on publication. Z.1 Changes from -00 to -01 Add hash function OIDs and informational reference to [RFC4055]. A few Editorial changes and typo fixes. Z.2 Changes from -01 to -02 In shatest.c, replace MIT getopt (xgetopt) code with new code to avoid possible conflict between MIT license and IETF required BSD license. Z.3 Changes from -02 to -03 Problem with MIT getopt is given incompletely in -01 to -02 changes. Actual problem includes conflict with IETF incoming license restriction. Also, add this change to Appendix giving changes from RFC 4634. Update to incorporate RFC number for the HKDF RFC. Numerous editorial changes. D. Eastlake 3rd, T. Hansen [Page 124] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Author's Address Donald E. Eastlake, 3rd Stellar Switches 155 Beaver Street Milford, MA 01757 USA Telephone: +1-508-333-2270 EMail: d3e3e3@gmail.com Tony Hansen AT&T Laboratories 200 Laurel Ave. Middletown, NJ 07748 USA Telephone: +1-732-420-8934 EMail: tony+shs@maillennium.att.com D. Eastlake 3rd, T. Hansen [Page 125] INTERNET-DRAFT SHAs, HMAC-SHAs, and HKDF Copyright, Disclaimer, and Additional IPR Provisions Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License. This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. D. Eastlake 3rd, T. Hansen [Page 126]