Internet Engineering Task Force H. Brockhaus
Internet-Draft S. Fries
Intended status: Standards Track D. von Oheimb
Expires: May 7, 2020 Siemens
November 4, 2019

Lightweight CMP Profile
draft-brockhaus-lamps-lightweight-cmp-profile-01

Abstract

The goal of this document is to facilitate interoperability and automation by profiling the Certificate Management Protocol (CMP) version 2 and the related Certificate Request Message Format (CRMF) version 2. It specifies a subset of CMP and CRMF focusing on typical uses cases relevant for managing certificates of devices in many industrial and IoT scenarios. To limit the overhead of certificate management for more constrained devices only the most crucial types of transactions are specified as mandatory. To foster interoperability also in more complex scenarios, other types of transactions are specified as recommended or optional.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on May 7, 2020.

Copyright Notice

Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. History of changes

From version 00 -> 01:

From version draft-brockhaus-lamps-industrial-cmp-profile-00 -> brockhaus-lamps-lightweight-cmp-profile-00:

2. Introduction

This document specifies PKI management operations supporting machine-to-machine and IoT use cases. The focus lies on maximum automation and interoperable implementation of all involved PKI entities from end entities (EE) through an optional Local Registration Authority (LRA) and the RA up to the CA. The profile makes use of the concepts and syntax specified in CMP, CRMF, HTTP transfer for CMP, and CMP Updates. Especially CMP and CRMF are very feature-rich standards, while only a limited subset of the specified functionality is needed in many environments. Additionally, the standards are not always precise enough on how to interpret and implement the described concepts. Therefore, we aim at tailoring and specifying in more detail how to use these concepts to implement lightweight automated certificate management.

2.1. Motivation for profiling CMP

CMP was standardized in 1999 and is implemented in several CA products. In 2005 a completely reworked and enhanced version 2 of CMP and CRMF has been published followed by a document specifying a transfer mechanism for CMP messages using http [RFC6712] in 2012.

Though CMP is a very solid and capable protocol it could be used more widely. The most important reason for not more intense application of CMP appears to be that the protocol is offering a large set of features and options but being not always precise enough and leaving room for interpretation. On the one hand, this makes CMP applicable to a very wide range of scenarios, but on the other hand a full implementation of all options is unrealistic because this would take enormous effort.

Moreover, many details of the CMP protocol have been left open or have not been specified in full preciseness. The profiles specified in Appendix D and E of [RFC4210] offer some more detailed certificate use cases. But the specific needs of highly automated scenarios for a machine-to-machine communication are not covered sufficiently.

As also 3GPP and UNISG already put across, profiling is a way of coping with the challenges mentioned above. To profile means to take advantage of the strengths of the given protocol, while explicitly narrowing down the options it provides to exactly those needed for the purpose(s) at hand and eliminating all identified ambiguities. In this way all the general and applicable aspects of the protocol can be taken over and only the peculiarities of the target scenario need to be dealt with specifically.

Doing such a profiling for a new target environment can be a high effort because the range of available options needs to be well understood and the selected options need to be consistent with each other and with the intended usage scenario. Since most industrial use cases typically have much in common it is worth sharing this effort, which is the aim of this document. Other standardization bodies can then reference the profile from this document and do not need to come up with individual profiles.

2.2. Motivation for a lightweight profile for CMP

The profiles specified in Appendix D and E of CMP have been developed in particular to manage certificates of human end entities. With the evolution of distributed systems and client-server architectures, certificates for machines and applications on them have become widely used. This trend has strengthened even more in emerging industrial and IoT scenarios. CMP is sufficiently flexible to support these very well.

Today's IT security architectures for industrial solutions typically use certificates for endpoint authentication within protocols like IPSec, TLS, or SSH. Therefore, the security of these architectures highly relies upon the security and availability of the implemented certificate management procedures.

Due to increasing security in operational networks as well as availability requirements, especially on critical infrastructures and systems with a high volume of certificates, a state-of-the-art certificate management must be constantly available and cost-efficient, which calls for high automation and reliability. The NIST Cyber Security Framework also refers to proper processes for issuance, management, verification, revocation, and audit for authorized devices, users and processes involving identity and credential management. Such PKI operation according to commonly accepted best practices is also required in IEC 62443-3-3 for security level 2 up to security level 4.

Further challenges in many industrial systems are network segmentation and asynchronous communication, where PKI operation is often not deployed on-site but in a more protected environment of a data center or trust center. Certificate management must be able to cope with such network architectures. CMP offers the required flexibility and functionality, namely self-contained messages, efficient polling, and support for asynchronous message transfer with end-to-end security.

2.3. Existing CMP profiles

As already stated, CMP contains profiles with mandatory and optional transactions in the Appendixes D and E of [RFC4210]. Those profiles focus on management of human user certificates and do only partly address the specific needs for certificate management automation for unattended machine or application-oriented end entities.

3GPP makes use of CMP in its Technical Specification 133 310 for automatic management of IPSec certificates in UMTS, LTE, and 5G backbone networks. Since 2010 a dedicated CMP profile for initial certificate enrollment and update transactions between end entities and the RA/CA is specified in the document.

UNISIG has included a CMP profile for certificate enrollment in the subset 137 specifying the ETRAM/ECTS on-line key management for train control systems in 2015.

Both standardization bodies use CMP, CRMF, and HTTP transfer for CMP to add tailored means for automated certificate management for unattended machine or application-oriented end entities.

2.4. Compatibility with existing CMP profiles

The profile specified in this document is compatible with CMP Appendixes D and E (PKI Management Message Profiles), with the following exceptions:

The profile specified in this document is compatible with the CMP profile for UMTS, LTE, and 5G network domain security and authentication framework [ETSI-3GPP], except that:

The profile specified in this document is compatible with the CMP profile for on-line key management in rail networks as specified in UNISIG subset-137, except that:

2.5. Scope of this document

This document specifies requirements on generating messages on the sender side. It does not specify strictness of verification on the receiving side and how in detail to handle error cases.

Especially on the EE side this profile aims at a lightweight protocol that can be implemented on more constrained devices. On the side of the central PKI management entities the profile accepts higher resource needed.

For the sake of robustness and preservation of security properties implementations should, as far as security is not affected, adhere to Postel's law: "Be conservative in what you do, be liberal in what you accept from others" (often reworded as: "Be conservative in what you send, be liberal in what you accept").

When in chapter 3, 4, and 5 a field of the ASN.1 syntax as defined in RFC 4210 and RFC 4211 is not explicitly specified, it SHOULD not be used by the sending entity. The receiving entity MUST NOT require its absence and if present MUST gracefully handle its presence.

2.6. Structure of this document

Chapter 2 introduces the general PKI architecture and approach to certificate management using CMP that is assumed in this document. Then it enlists the PKI management opertations specified in this document and describes them in general words. The list of supported certificate management use cases is divided into mandatory, recommended, and optional ones.

Chapter 3 profiles the CMP message header, protection, and extraCerts section as they are general elements of CMP messages.

Chapter 4 profiles the exchange of CMP messages between an EE and the first PKI management entities. There are various flavors of certificate enrollment requests optionally with polling, revocation, error handling, and general support transactions.

Chapter 5 profiles the exchange between PKI management entities. These are in the first place the forwarding of messages coming from or going to an EE. This includes also initiating delayed delivery of messages, which involves polling. Additionally, it specifies transactions where the PKI component manages certificates on behalf of an EE or for itself.

Chapter 6 outlines different mechanisms for CMP message transfer, namely http-based transfer as already specified in [RFC6712], using an additional TLS layer, or offline file-based transport. CoAP and piggybacking CMP messages on other protocols is out of scope and left for further documents.

2.7. Convention and Terminology

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.

In this document, these words will appear with that interpretation only when in ALL CAPS. Lower case uses of these words are not to be interpreted as carrying significance described in RFC 2119.

Technical terminology is used in conformance with RFC 4210, RFC 4211, RFC 5280, and IEEE 802.1AR. The following key words are used:

CA:
Certification authority, which issues certificates.
RA:
Registration authority, an optional system component to which a CA delegates certificate management functions such as authorization checks.
LRA:
Local registration authority, an optional RA system component with proximity to the end entities.
KGA:
Key generation authority, an optional system component, typically co-located with an LRA, RA, or CA, that offers key generation services to end entities.
EE:
End entity, a user, device, or service that holds a PKI certificate. An identifier for the EE is given as the subject of its certificate.

3. Architecture and use cases

3.1. Solution architecture

Typically, a machine EE will be equipped with a manufacturer issued certificate during production. Such a manufacturer issued certificate is installed during production to identify the device throughout its lifetime. This manufacturer certificate can be used to protect the initial enrollment of operational certificates after installation of the EE in a plant or industrial network. An operational certificate is issued by the owner or operator of the device to identify the device during operation, e.g., within a security protocol like IPSec, TLS, or SSH. In IEEE 802.1AR a manufacturer certificate is called IDevID certificate and an operational certificate is called LDevID certificate.

All certificate management transactions are initiated by the EE. The EE creates a CMP request message, protects it using its manufacturer or operational certificate, if available, and sends it to its locally reachable PKI component. This PKI component may be an LRA, RA, or the CA, which checks the request, responds to it itself, or forwards the request upstream to the next PKI component. In case an (L)RA changes the CMP request message header or body or wants to prove a successful verification or authorization, it can apply a protection of its own. Especially the communication between an LRA and RA can be performed synchronously or asynchronously. Synchronous communication describes a timely uninterrupted communication between two communication partners, as asynchronous communication is not performed in a timely consistent manner, e.g., because of a delayed message delivery.

                                                                
+-----+            +-----+                +-----+            +-----+
|     |            |     |                |     |            |     |
| EE  |<---------->| LRA |<-------------->| RA  |<---------->| CA  |
|     |            |     |                |     |            |     |
+-----+            +-----+                +-----+            +-----+
                                                                    
        synchronous        (a)synchronous         synchronous       
   +----connection----+------connection------+----connection----+   
                                                                    
        on site at                operators          service partner
+----------plant---------+-----backend services-----+-trust center-+
         

Figure 1: Certificate management on site

In operation environments a layered LRA-RA-CA architecture can be deployed, e.g., with LRAs bundling requests from multiple EEs at dedicated locations and one (or more than one) central RA aggregating the requests from multiple LRAs. Every (L)RA in this scenario will have its own dedicated certificate containing an extended key usage as specified in CMP Updates and private key allowing it to protect CMP messages it processes (CMP signing key/certificate). The figure above shows an architecture using one LRA and one RA. It is also possible to have only an RA or multiple LRAs and/or RAs. Depending on the network infrastructure, the communication between different PKI components may be synchronous online-communication, delayed asynchronous communication, or even offline file transfer.

As this profile focusses on specifying the pull model, where the EE always requests a PKI management operation. CMP response messages, especially in case of central key generation as described in Section 5.1.6, can also be used to deliver proactively to the EE to implement the push model.

Third-party CAs typically implement different variants of CMP or even use proprietary interfaces for certificate management. Therefore, the LRA or the RA may need to adapt the exchanged CMP messages to the flavor of communication required by the CA.

3.2. Basic generic CMP message content

Section 4 specifies the generic parts of the CMP messages as used later in Section 5 and Section 6.

3.3. Supported use cases

Following the outlined scope from Section 2.5, this section gives a brief overview of the certificate management use cases specified in Section 5 and Section 6 and points out, if an implementation by compliant EE or PKI component is mandatory, recommended or optional.

3.3.1. Mandatory use cases

The mandatory uses case in this document shall limit the overhead of certificate management for more constrained devices to the most crucial types of transactions.

Section 5 - End Entity focused certificate management use cases

Section 6 - LRA and RA focused certificate management use cases

3.3.2. Recommended Use Cases

Additional recommended use cases shall support some more complex scenarios, that are considered as beneficial for environments with more specific boundary conditions.

Section 5 - End Entity focused certificate management use cases

Section 6 - LRA and RA focused certificate management use cases

3.3.3. Optional use cases

The optional use cases support specific requirements seen only in a subset of environments.

Section 5 - End Entity focused certificate management use cases

Section 6 - LRA and RA focused certificate management use cases

3.4. CMP message transport

Recommended transport

Optional transport

< Motivation see Section 7.4, specification TBD >

4. Generic parts of the PKI message

To reduce redundancy in the text and to ease implementation, the contents of the header, protection, and extraCerts fields of the CMP messages used in the transactions specified in Section 5 and Section 6 are standardized to the maximum extent possible. Therefore, the generic parts of a CMP message are described centrally in this section.

As described in section 5.1 of [RFC4210], all CMP messages have the following general structure:

                                                                
+--------------------------------------------+
| PKIMessage                                 |
| +----------------------------------------+ |
| | header                                 | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | body                                   | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | protection (OPTIONAL)                  | |
| +----------------------------------------+ |
| +----------------------------------------+ |
| | extraCerts (OPTIONAL)                  | |
| +----------------------------------------+ |
+--------------------------------------------+
            

Figure 2: CMP message structure

The general contents of the message header, protection, and extraCerts fields are specified in the Section 4.1 to Section 4.3.

In case a specific CMP message needs different contents in the header, protection, or extraCerts fields, the differences are described in the respective message.

The CMP message body contains the message-specific information. It is described in the context of Section 5 and Section 6.

The behavior in case an error occurs while handling a CMP message is described in Section 6.3.

4.1. General description of the CMP message header

This section describes the generic header field of all CMP messages with signature-based protection. The only variations described here are in the fields recipient, transactionID, and recipNonce of the first message of a transaction.

In case a message has MAC-based protection the changes are described in the respective section. The variations will affect the fields sender, protectionAlg, and senderKID.

For requirements about proper random number generation please refer to [RFC4086]. Any message-specific fields or variations are described in the respective sections of this chapter.

                                                                
header
  pvno                        REQUIRED
    -- MUST be set to 2 to indicate CMP V2
  sender                      REQUIRED
    -- MUST be the subject of the signing certificate used for
    -- protection of this message
  recipient                   REQUIRED
    -- MUST be the name of the intended recipient
    -- If this is the first message of a transaction: SHOULD be the
    -- subject of the issuing CA certificate
    -- In all other messages: SHOULD be the same name as in the 
    -- sender field of the previous message in this transaction
  messageTime                 RECOMMENDED
    -- MUST be the time at which the message was produced, if 
    -- present
  protectionAlg               REQUIRED
   -- MUST be the algorithm identifier of the signature or algorithm
   -- id-PasswordBasedMac algorithm used for calculation of the
   -- protection bits
   -- The signature algorithm MUST be consistent with the
   -- SubjectPublicKeyInfo field of the signer's certificate
   -- The hash algorithm used SHOULD be SHA-256
   algorithm                 REQUIRED
   -- MUST be the OID of the signature algorithm, like
   -- sha256WithRSAEncryption or ecdsa-with-SHA256, or
   -- id-PasswordBasedMac
  senderKID                   RECOMMENDED
    -- MUST be the SubjectKeyIdentifier, if available, of the 
    -- certificate used for protecting this message
  transactionID               REQUIRED
    -- If this is the first message of a transaction:
    -- MUST be 128 bits of random data for the start of a 
    -- transaction to reduce the probability of having the 
    -- transactionID already in use at the server
    -- In all other messages:
    -- MUST be the value from the previous message in the same 
    -- transaction
  senderNonce                 REQUIRED
    -- MUST be fresh 128 random bits
  recipNonce                  RECOMMENDED
    -- If this is the first message of a transaction: SHOULD be 
    -- absent
    -- In all other messages: MUST be present and contain the value
    -- from senderNonce of the previous message in the same 
    -- transaction
  generalInfo                 OPTIONAL
    implicitConfirm           OPTIONAL
      ImplicitConfirmValue    REQUIRED
    -- The field is optional though it only applies to 
    -- ir/cr/kur/p10cr requests and ip/cp/kup responses
    -- ImplicitConfirmValue of the request message MUST be NULL if
    -- the EE wants to request not to send a confirmation message
    -- ImplicitConfirmValue MUST be set to NULL if the (L)RA/CA wants
    -- to grant not sending a confirmation message
                

4.2. General description of the CMP message protection

This section describes the generic protection field of all CMP messages with signature-based protection.

                                                                
protection                    REQUIRED
    -- MUST contain the signature calculated using the signature 
    -- algorithm specified in protectionAlg
                

Only for MAC-based protection major differences apply as described in the respective message.

The CMP message protection provides, if available, message origin authentication and integrity protection for the CMP message header and body. The CMP message extraCerts is not covered by this protection.

NOTE: The requirements for checking certificates given in [RFC5280] MUST be followed for the CMP message protection. OCSP or CRLs SHOULD be used for status checking of the CMP signer certificates of communication partners.

4.3. General description of CMP message extraCerts

This section describes the generic extraCerts field of all CMP messages with signature-based protection.

                                                                
extraCerts                    RECOMMENDED
    -- SHOULD contain the signing certificate together with its 
    -- chain, if needed
    -- If present, the first certificate in this field MUST 
    -- be the certificate used for signing this message
    -- Self-signed certificates SHOULD NOT be included in
    -- extraCerts and MUST NOT be trusted based on the listing in 
    -- extraCerts in any case
                

5. End Entity focused certificate management use cases

This chapter focuses on the communication of the EE and the first PKI component it talks to. Depending on the network and PKI solution, this will either be the LRA, the RA or the CA.

Profiles of the Certificate Management Protocol (CMP) handled in this chapter cover the following certificate management use cases:

The use cases mainly specify the message body of the CMP messages and utilize the specification of the message header, protection and extraCerts as specified in Section 5.

The behavior in case an error occurs is described in Section 5.3.

This chapter is aligned to Appendix D and Appendix E of [RFC4210]. The general rules for interpretation stated in Appendix D.1 in [RFC4210] need to be applied here, too.

This document does not mandate any specific supported algorithms like Appendix D.2 of [RFC4210], [ETSI-3GPP], and [UNISIG] do. Using the message sequences described here require agreement upon the algorithms to support and thus the algorithm identifiers for the specific target environment.

5.1. Requesting a new certificate from a PKI

There are different approaches to request a certificate from a PKI.

These approaches differ on the one hand in the way the EE can authenticate itself to the PKI it wishes to get a new certificate from and on the other hand in its capabilities to generate a proper new key pair. The authentication means may be as follows:

Typically, such EE requests a certificate from a CA. When the (L)RA/CA responds with a message containing a certificate, the EE MUST reply with a confirmation message. The (L)RA/CA then MUST send confirmation back, closing the transaction.

The message sequences in this section allow the EE to request certification of a locally generated public-private key pair. For requirements about proper random number and key generation please refer to [RFC4086]. The EE MUST provide a signature-based proof-of-possession of the private key associated with the public key contained in the certificate request as defined by [RFC4211] section 4.1 case 3. To this end it is assumed that the private key can technically be used as signing key. The most commonly used algorithms are RSA and ECDSA, which can technically be used for signature calculation regardless of potentially intended restrictions of the key usage.

The requesting EE provides the binding of the proof-of-possession to its identity by signature-based or MAC-based protection of the CMP request message containing that POPO. The (L)RA/CA needs to verify whether this EE is authorized to obtain a certificate with the requested subject and other attributes and extensions. Especially when removing the protection provided by the EE and applying a new protection the (L)RA MUST verify in particular the included proof-of-possession self-signature of the certTemplate using the public key of the requested certificate and MUST check that the EE, as authenticated by the message protection, is authorized to request a certificate with the subject as specified in the certTemplate (see Section 6.1.2).

There are several ways to install the Root CA certificate of a new PKI on an EE. The installation can be performed in an out-of-band manner, using general messagesm, a voucher, or other formats for enrolment, or in-band of CMP by the caPubs field in the certificate response message. In case the installation of the new Root CA certificate is performed using the caPubs field, the certificate response message MUST be properly authenticated, and the sender of this message MUST be authorized to install new Root CA certificates on the EE. This authorization MUST be indicated by the extended key usage in the (L)RA/CA certificate as specified in CMP Updates.

5.1.1. A certificate from a new PKI with signature protection

This message sequence should be used by an EE to request a certificate of a new PKI using an existing certificate from an external PKI, e.g., a manufacturer certificate, to prove its identity to the new PKI. The EE already has established trust in this new PKI it is about to enroll to, e.g., by configuration means. The initialization request message is signature-protected using the existing certificate.

Preconditions:

1
The EE MUST have a certificate enrolled by an external PKI in advance to this transaction to authenticate itself to the (L)RA/CA using signature-based protection, e.g., using a manufacturer certificate.
2
The EE SHOULD know the subject name of the new CA it requests a certificate from; this name MAY be established using an enrollment voucher or other configuration means. If the EE does not know the name of the CA, the (L)RA/CA MUST know where to route this request to.
3
The EE MUST authenticate responses from the (L)RA/CA; trust MAY be established using an enrollment voucher or other configuration means
4
The (L)RA/CA MUST trust the external PKI the EE uses to authenticate itself; trust MAY be established using some configuration means

This message sequence is like that given in [RFC4210] Appendix E.7.

Message flow:

                                                                
Step# EE                                  (L)RA/CA
  1   format ir
  2                      ->   ir      ->
  3                                        handle, re-protect or 
                                             forward ir
  4                                        format or receive ip
  5                                        possibly grant implicit
                                             confirm
  6                      <-   ip      <-
  7   handle ip
  8                                        In case of status 
                                             "rejection" in the
                                             ip message, no certConf 
                                             and pkiConf are sent
  9   format certConf (optional)
 10                      ->   certConf ->
 11                                        handle, re-protect or 
                                             forward certConf
 12                                        format or receive PKIConf
 13                      <-   pkiConf  <-
 14   handle pkiConf (optional)
                    

For this message sequence the EE MUST include exactly one single CertReqMsg in the ir. If more certificates are required, further requests MUST be sent using separate CMP Messages. If the EE wants to omit sending a certificate confirmation message after receiving the ip to reduce the number of protocol messages exchanged in a transaction, it MUST request this by setting the implicitControlValue in the ir to NULL.

If the CA accepts the request it MUST return the new certificate in the certifiedKeyPair field of the ip message. If the EE requested to omit sending a certConf message after receiving the ip, the (L)RA/CA MAY confirm this by also setting the implicitControlValue in the ip to NULL.

If the EE did not request implicit confirmation or the request was not granted by the (L)RA/CA the confirmation as follows MUST be performed. If the EE successfully receives the certificate and accepts it, the EE MUST send a certConf message, which MUST be answered by the (L)RA/CA with a pkiConf message. If the (L)RA/CA does not receive the expected certConf message in time it MUST handle this like a rejection by the EE.

If the certificate request was refused by the CA, the (L)RA/CA must return an ip message containing the status code "rejection" and no certifiedKeyPair field. Such an ip message MUST NOT be followed by the certConf and pkiConf messages.

Detailed message description:

                                                                
Certification Request -- ir

Field                         Value

header
    -- As described in section 3.1 

body
    -- The request of the EE for a new certificate
  ir                          REQUIRED
    -- MUST be exactly one CertReqMsg
    -- If more certificates are required, further requests MUST be
    -- packaged in separate PKI Messages
    certReq                   REQUIRED
      certReqId               REQUIRED
    -- MUST be set to 0
      certTemplate            REQUIRED
        version               OPTIONAL
    -- MUST be 2 if supplied.
        subject               REQUIRED
    -- MUST contain the suggested subject name of the EE
    -- certificate
        publicKey             REQUIRED
          algorithm           REQUIRED
    -- MUST include the subject public key algorithm ID and value
    -- In case a central key generation is requested, this field
    -- contains the algorithm and parameter preferences of the
    -- requesting entity regarding the to-be-generated key pair
          subjectPublicKey    REQUIRED
    -- MUST contain the public key to be included into the requested
    -- certificate in case of local key-generation
    -- MUST contain a zero-length BIT STRING in case a central key 
    -- generation is requested
    -- MUST include the subject public key algorithm ID and value
        extensions            OPTIONAL
    -- MAY include end-entity-specific X.509 extensions of the
    -- requested certificate like subject alternative name, 
    -- key usage, and extended key usage
    Popo                      REQUIRED
      POPOSigningKey          OPTIONAL
    -- MUST be used in case subjectPublicKey contains a public key
    -- MUST be absent in case subjectPublicKey contains a
    -- zero-length BIT STRING
      POPOSigningKey          REQUIRED
        poposkInput           PROHIBITED
    -- MUST NOT be used because subject and publicKey are both 
    -- present in the certTemplate
        algorithmIdentifier   REQUIRED
    -- The signature algorithm MUST be consistent with the 
    -- publicKey field of the certTemplate
    -- The hash algorithm used SHOULD be SHA-256
        signature             REQUIRED
    -- MUST be the signature computed over the DER-encoded
    -- certTemplate

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
    -- As described in section 3.3


Certification Response -- ip

Field                         Value

header
    -- As described in section 3.1

body
    -- The response of the CA to the request as appropriate
  ip                          REQUIRED
    caPubs                    OPTIONAL
    -- MAY be used
    -- If used it MUST contain only the root certificate of the
    -- certificate contained in certOrEncCert
    response                  REQUIRED
    -- MUST be exactly one CertResponse
      certReqId               REQUIRED
    -- MUST be set to 0
      status                  REQUIRED
    -- PKIStatusInfo structure MUST be present
        status                REQUIRED
    -- positive values allowed: "accepted", "grantedWithMods"
    -- negative values allowed: "rejection"
    -- In case of rejection no certConf and pkiConf messages will 
    -- be sent
        statusString          OPTIONAL
    -- MAY be any human-readable text for debugging, logging or to 
    -- display in a GUI
        failInfo              OPTIONAL
    -- MUST be present if status is "rejection" and in this case 
    -- the transaction MUST be terminated
    -- MUST be absent if the status is "accepted" or 
    -- "grantedWithMods"
      certifiedKeyPair        OPTIONAL
    -- MUST be present if status is "accepted" or "grantedWithMods"
    -- MUST be absent if status is "rejection"
        certOrEncCert         REQUIRED
    -- MUST be present when certifiedKeyPair is present
          certificate         REQUIRED
    -- MUST be present when certifiedKeyPair is present
    -- MUST contain the newly enrolled X.509 certificate
        privateKey            OPTIONAL
    -- MUST be absent in case of local key-generation
    -- MUST contain the encrypted private key in an EnvelopedData
    -- structure as specified in section 5.1.5 in case the private 
    -- key was generated centrally 

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
    -- As described in section 3.3
    -- MUST contain the chain of the issued certificate
    -- Duplicate certificates MAY be omitted


Certificate Confirmation -- certConf

Field                         Value

header
    -- As described in section 3.1

body
    -- The message of the EE sends confirmation to the (L)RA/CA
    -- to accept or reject the issued certificates
  certConf                    REQUIRED
    -- MUST be exactly one CertStatus
    CertStatus                REQUIRED
      certHash                REQUIRED
    -- MUST be the hash of the certificate, using the same hash 
    -- algorithm as used to create the certificate signature
      certReqId               REQUIRED
    -- MUST be set to 0
      status                  RECOMMENDED
    -- PKIStatusInfo structure SHOULD be present
    -- Omission indicates acceptance of the indicated certificate
        status                REQUIRED
    -- positive values allowed: "accepted"
    -- negative values allowed: "rejection"
        statusString          OPTIONAL
    -- MAY be any human-readable text for debugging or logging
        failInfo              OPTIONAL
    -- MUST be present if status is "rejection"
    -- MUST be absent if the status is "accepted"

protection                    REQUIRED
    -- As described in section 3.2
    -- MUST use the same certificate as for protection of the ir

extraCerts                    RECOMMENDED
    -- SHOULD contain the protection certificate together with its 
    -- chain
    -- If present, the first certificate in this field MUST be the
    -- certificate used for signing this message
    -- Self-signed certificates SHOULD NOT be included in 
    -- extraCerts and 
    -- MUST NOT be trusted based on the listing in extraCerts in 
    -- any case


PKI Confirmation -- pkiConf

Field                         Value

header
    -- As described in section 3.1

body
  pkiConf                     REQUIRED
    -- The content of this field MUST be NULL

protection                    REQUIRED
    -- As described in section 3.2
    -- SHOULD use the same certificate as for protection of the ip

extraCerts                    RECOMMENDED
    -- SHOULD contain the protection certificate together with its 
    -- chain
    -- If present, the first certificate in this field MUST be the 
    -- certificate used for signing this message
    -- Self-signed certificates SHOULD NOT be included in extraCerts 
    -- and 
    -- MUST NOT be trusted based on the listing in extraCerts in 
    -- any case
                    

5.1.2. A certificate from a trusted PKI with signature protection

< TBD: In case the PKI is already trusted the cr/cp messages could be used instead of ir/ip. It needs to be decided, whether an additional section should be added here, or the previous section should be extended to also cover this use case. >

5.1.3. Update an existing certificate with signature protection

This message sequence should be used by an EE to request an update of one of the certificates it already has and that is still valid. The EE uses the certificate it wishes to update to prove its identity and possession of the private key for the certificate to be updated to the PKI. Therefore, the key update request message is signed using the certificate that is to be updated.

The general message flow for this message sequence is the same as given in Section 5.1.1.

Preconditions:

1
The certificate the EE wishes to update MUST NOT be expired or revoked.
2
A new public-private key pair SHOULD be used.

The message sequence for this exchange is like that given in [RFC4210] Appendix D.6.

The message sequence for this exchange is identical to that given in Section 5.1.1, with the following changes:

1
The body of the first request and response MUST be kur and kup, respectively.
2
Protection of the kur MUST be performed using the certificate to be updated.
3
The subject field of the CertTemplate MUST contain the subject name of the existing certificate to be updated, without modifications.
4
The CertTemplate MUST contain the subject, issuer and publicKey fields only.
5
The regCtrl OldCertId SHOULD be used to make clear, even in case an (L)RA changes the message protection, which certificate is to be.
6
The caPubs field in the kup message MUST be absent.

As part of the certReq structure of the kur the control is added right after the certTemplate.

                                                                
    controls
      type                    RECOMMENDED
    -- MUST be the value id-regCtrl-oldCertID, if present
      value
        issuer                REQUIRED
        serialNumber          REQUIRED
    -- MUST contain the issuer and serialNumber of the certificate
    -- to be updated
                    

5.1.4. A certificate from a PKI with MAC protection

This message sequence should be used by an EE to request a certificate of a new PKI without having a certificate to prove its identity to the target PKI, but there is a shared secret established between the EE and the PKI. Therefore, the initialization request is MAC-protected using this shared secret. The (L)RA checking the MAC-protection SHOULD replace this protection according to Section 6.1.2 in case the next hop does not know the shared secret.

For requirements with regard to proper random number and key generation please refer to [RFC4086].

The general message flow for this message sequence is the same as given in Section 5.1.1.

Preconditions:

1
The EE and the (L)RA/CA MUST share a symmetric key, this MAY be established by a service technician during initial local configuration.
2
The EE SHOULD know the subject name of the new CA it requests a certificate from; this name MAY be established using an enrollment voucher or other configuration means. If the EE does not know the name of the CA, the (L)RA/CA MUST know where to route this request to.
3
The EE MUST authenticate responses from the (L)RA/CA; trust MAY be established using the shared symmetric key.

The message sequence for this exchange is like that given in [RFC4210] Appendix D.4.

The message sequence for this exchange is identical to that given in Section 5.1.1, with the following changes:

1
The protection of all messages MUST be calculated using Message Authentication Code (MAC); the protectionAlg field MUST be id-PasswordBasedMac as described in section 5.1.3.1 of [RFC4210].
2
The sender MUST contain a name representing the originator of the message. The senderKID MUST contain a reference all participating entities can use to identify the symmetric key used for the protection.
3
The extraCerts of the ir, certConf, and PKIConf messages MUST be absent.
4
The extraCerts of the ip message MUST contain the chain of the issued certificate and root certificates SHOULD not be included and MUST NOT be trusted in any case.

Part of the protectionAlg structure, where the algorithm identifier MUST be id-PasswordBasedMac, is a PBMParameter sequence. The fields of PBMParameter SHOULD remain constant for message protection throughout this certificate management transaction to reduce the computational overhead.

                                                                
    PBMParameter              REQUIRED
      salt                    REQUIRED
    -- MUST be the random value to salt the secret key
      owf                     REQUIRED
    -- MUST be the algorithm identifier for the one-way function 
    -- used
    -- The one-way function SHA-1 MUST be supported due to 
    -- [RFC4211] requirements, but SHOULD NOT be used any more
    -- SHA-256 SHOULD be used instead
      iterationCount          REQUIRED
    -- MUST be a limited number of times the OWF is applied
    -- To prevent brute force and dictionary attacks a reasonable 
    -- high number SHOULD be used
      mac                     REQUIRED
    -- MUST be the algorithm identifier of the MAC algorithm used
    -- The MAC function HMAC-SHA1 MUST be supported due to 
    -- [RFC4211] requirements, but SHOULD NOT be used any more
    -- HMAC-SHA-256 SHOULD be used instead
                    

5.1.5. A certificate from a legacy PKI using PKCS#10 request

This message sequence should be used by an EE to request a certificate of a legacy PKI only capable to process PKCS#10 certification requests. The EE can prove its identity to the target PKI by using various protection means as described in Section 5.1.1 or Section 5.1.4.

In contrast to the other transactions described in Section 5.1, this transaction uses PKCS#10 instead of CRMF for the certificate request for compatibility reasons with legacy CA systems that require a PKCS#10 certificate request and cannot process CMP or CRMF messages. In such case the (L)RA must extract the PKCS#10 certificate request from the p10cr and provides it separately to the CA.

The general message flow for this message sequence is the same as given in Section 5.1.1, but the public key is contained in the subjectPKInfo of the PKCS#10 certificate request.

Preconditions:

1
The EE MUST either have a certificate enrolled from this or any other accepted PKI, or a shared secret known to the PKI and the EE to authenticate itself to the (L)RA/CA.
2
The EE SHOULD know the subject name of the CA it requests a certificate from; this name MAY be established using an enrollment voucher or other configuration means. If the EE does not know the name of the CA, the (L)RA/CA MUST know where to route this request to.
3
The EE MUST authenticate responses from the (L)RA/CA; trust MAY be established by an available root certificate, using an enrollment voucher, or other configuration means.
4
The (L)RA/CA MUST trust the current or the PKI the EE uses to authenticate itself; trust MAY be established by a corresponding available root certificate or using some configuration means.

The profile for this exchange is identical to that given in Section 5.1.1, with the following changes:

1
The body of the first request and response MUST be p10cr and cp, respectively.
2
The subject name of the CA MUST be in the recipient field of the p10cr message header.
3
The certReqId in the cp message MUST be 0.
4
The caPubs field in the cp message SHOULD be absent.

Detailed description of the p10cr message:

Certification Request -- p10cr

Field                         Value

header
    -- As described in section 3.1

body
    -- The request of the EE for a new certificate using a PKCS#10
    -- certificate request
  p10cr                       REQUIRED
    CertificationRequestInfo  REQUIRED
      version                 REQUIRED
    -- MUST be set to 0 to indicate PKCS#10 V1.7
      subject                 REQUIRED
    -- MUST contain the suggested subject name of the EE
      subjectPKInfo           REQUIRED
    -- MUST include the subject public key algorithm ID and value
      attributes              OPTIONAL
    -- MAY contain a set of end-entity-specific attributes or X.509
    -- extensions to be included in the requested certificate or used
    -- otherwise
    signatureAlgorithm        REQUIRED
    -- The signature algorithm MUST be consistent with the 
    -- subjectPKInfo field. The hash algorithm used SHOULD be SHA-256
    signature                 REQUIRED
    -- MUST containing the self-signature for proof-of-possession

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
    -- As described in section 3.3
                    

5.1.6. Generate the key pair centrally at the (L)RA/CA

This functional extension can be applied in combination with certificate enrollment as described in Section 5.1.1 and Section 5.1.4. The functional extension can be used in case an EE is not abele or is not willing to generate is't new public-private key pair itself. It is a matter of the local implementation which central PKI components will perform the key generation. This component must have a proper (L)RA/CA certificate containing the additional extended key usage id-kp-cmcKGA to be identified by the EE as a legitimate key-generation instance. In case the (L)RA generated the new key pair for the EE, it can use Section 5.1.1 to Section 5.1.4 to request the certificate for this key pair as usual.

Generally speaking, in a machine-to-machine scenario it is strongly preferable to generate public-private key pairs locally at the EE. Together with proof-of-possession of the private key in the certification request, this is to make sure that only the entity identified in the newly issued certificate is the only entity who ever hold the private key.

There are some cases where an EE is not able or not willing to locally generate the new key pair. Reasons for this may be the following:

Note: Good random numbers are not only needed for key generation, but also for session keys and nonces in any security protocol. Therefore, we believe that a decent security architecture should anyways support good random number generation on the EE side or provide enough entropy for the RNG seed during manufacturing to guarantee good initial pseudo-random number generation.

Note: As key generation can be performed in advance to the certificate enrollment communication, it is typical not time critical.

Note: Besides the initial enrollment right after the very first bootup of the device, where entropy available on the device may be insufficient, we do not see any good reason for central key generation.

Note: As mentioned in Section 3.1 central key generation may be required in a push model, where the certificate response message is transfered by the (L)RA/CA to the EE without receiving a previos request message.

If the EE wishes to request central key generation, it MUST fill the subjectPublicKey field in the certTemplate structure of the request message with a zero-length BIT STRING. This indicates to the (L)RA/CA that a new key pair shall be generated centrally on behalf of the EE.

Note: As the protection of centrally generated keys in the response message is being extended from EncryptedValue to EncryptedKey by CMP Updates also the alternative EnvelopedData can be used. In CRMF Section 2.1.9 the use of EncryptedValue has been deprecated in favor of the EnvelopedData structure. Therefore, this profile specifies using EnvelopedData as specified in CMS Section 6 to offer more crypto agility.

+------------------------------+
| EnvelopedData                |
| [RFC5652] section 6          |
| +--------------------------+ |
| | SignedData               | |
| | [RFC5652] section 5      | |
| | +----------------------+ | |
| | | privateKey           | | |
| | | OCTET STRING         | | |
| | +----------------------+ | |
| +--------------------------+ |
+------------------------------+
                   

Figure 3: Encrypted private key container

The (L)RA/CA delivers the private key in the privateKey field in the certifiedKeyPair structure of the response message also containing the newly issued certificate.

The private key MUST be wrapped in a SignedData structure, as specified in CMS Section 5, signed by the KGA generating the key pair. The signature MUST be performed using a CMP signer certificate asserting the extended key usage kp-id-cmpKGA as described in CMP Updates to show the authorization to generate key pairs on behalf of an EE.

This SignedData structure MUST be wrapped in an EnvelopedData structure, as specified in CMS Section 6, encrypting it using a newly generated symmetric content-encryption key.

Note: Instead of the specification in CMP Appendix D 4.4 this content-encryption key is not generated on the EE side. As we just mentioned, central key generation should only be used in this profile in case of lack of randomness on the EE.

As part of the EnvelopedData structure this content-encryption key MUST be securely provided to the EE using one of three key management techniques. The choice of the key management technique to be used by the (L)RA/CA depends on the authentication mechanism the EE choose to protect the request message.

For encrypting the SignedData structure containing the private key a fresh content-encryption key MUST be generated with enough entropy with regard to the used symmetric encryption algorithm.

Note: Depending on the lifetime of the certificate and the criticality of the generated private key, it is advisable to use the strongest possible symmetric encryption algorithm. Therefore, this specification recommends using at least AES-256.

The detailed description of the privateKey field looks like this:

        privateKey            OPTIONAL
    -- MUST be an envelopedData structure as specified in
    -- CMS [RFC5652] section 6
          version             REQUIRED
    -- MUST be set to 2
          recipientInfos      REQUIRED
    -- MUST be exactly one RecipientInfo
            recipientInfo     REQUIRED
    -- MUST be either KEKRecipientInfo (see section 5.1.5.1),
    -- KeyAgreeRecipientInfo (see section 5.1.5.2), or 
    -- KeyTransRecipientInfo (see section 5.1.5.3) is used
          encryptedContentInfo
                              REQUIRED
            contentType       REQUIRED
    -- MUST be id-signedData
            contentEncryptionAlgorithm
                              REQUIRED
    -- MUST be the algorithm identifier of the symmetric
    -- content-encryption algorithm used
    -- As private keys need long-term protection, the use of AES-256
    -- or a stronger symmetric algorithm is RECOMMENDED
            encryptedContent  REQUIRED
    -- MUST be the encrypted signedData structure as specified in
    -- CMS [RFC5652] section 5
              version         REQUIRED
    -- MUST be set to 3
              digestAlgorithms
                              REQUIRED
    -- MUST be exactly one digestAlgorithm identifier
                digestAlgorithmIdentifier
                              REQUIRED
    -- MUST be the OID of the digest algorithm used for generating 
    -- the signature 
    -- The hash algorithm used SHOULD be SHA-256
              encapContentInfo
                              REQUIRED
    -- MUST be the content that is to be signed
                contentType   REQUIRED
    -- MUST be id-data
                content       REQUIRED
    -- MUST be the privateKey as OCTET STRING
              certificates    REQUIRED
    -- SHOULD contain the signing certificate together with its chain
    -- If present, the first certificate in this field MUST
    -- be the certificate used for signing this content
    -- Self-signed certificates SHOULD NOT be included
    -- and MUST NOT be trusted based on the listing in any case
              crls            OPTIONAL
    -- MAY be present to provide status information on the signer or
    -- its CA certificates
              signerInfos     REQUIRED
    -- MUST be exactly one signerInfo
                version       REQUIRED
    -- MUST be set to 3
                sid           REQUIRED
                  subjectKeyIdentifier
                              REQUIRED
    -- MUST be the subjectKeyIdentifier of the signer's certificate
                digest algorithm
                              REQUIRED
    -- MUST be the same OID as in digest algorithm
                signatureAlgorithm
                              REQUIRED
    -- MUST be the algorithm identifier of the signature algorithm
    -- used for calculation of the signature bits, 
    -- like sha256WithRSAEncryption or ecdsa-with-SHA256
    -- The signature algorithm MUST be consistent with the
    -- SubjectPublicKeyInfo field of the signer's certificate
                signature     REQUIRED
    -- MUST be the result of the digital signature generation
                    

5.1.6.1. Using symmetric key-encryption key management technique

This key management technique can be applied in combination with the message flow specified in Section 5.1.4 using MAC protected CMP messages. The shared secret used for the MAC protection MUST also be used for the encryption of the content-encryption key but with a different seed in the PBMParameter sequence. To use this key management technique the KEKRecipientInfo structure MUST be used in the contentInfo field.

The KEKRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.3.

The detailed description of the KEKRecipientInfo structure looks like this:

            recipientInfo     REQUIRED
    -- MUST be KEKRecipientInfo as specified in
    -- CMS section 6.2.3 [RFC5652]
              version         REQUIRED
    -- MUST be set to 4
              kekid           REQUIRED
                keyIdentifier REQUIRED
    -- MUST contain the same value as the senderKID in the respective
    -- request messages
              keyEncryptionAlgorithm
                              REQUIRED
    -- MUST be id-PasswordBasedMac
                PBMParameter  REQUIRED
                  salt        REQUIRED
    -- MUST be the random value to salt the secret key
    -- MUST be a different value than used in the PBMParameter
    -- data structure in the header of this message
                  owf         REQUIRED
    -- MUST be the same value than used in the PBMParameter
    -- data structure in the header of this message
                  iterationCount
                              REQUIRED
    -- MUST be a limited number of times the OWF is applied
    -- To prevent brute force and dictionary attacks a reasonable
    -- high number SHOULD be used
                  mac         REQUIRED
    -- MUST be the same as in the contentEncryptionAlgorithm field
              encryptedKey    REQUIRED
    -- MUST be the encrypted content-encryption key
                        

< To make use of a different symmetric keys for encrypting the private key and for MAC-protection of the CMP Message, we derive another key using the same PBMParameter structure from CMP, even though from the perspective of field names, it is not intended to be used for deriving encryption keys.

Does anyone sees a better solution here? >

5.1.6.2. Using key agreement key management technique

This key management technique can be applied in combination with the message flow specified in Section 5.1.1 using signature-based protected CMP messages. The public key of the EE certificate used for the signature-based protection of the request message MUST also be used for the Ephemeral-Static Diffie-Hellmann key establishment of the content-encryption key. To use this key management technique the KeyAgreeRecipientInfo structure MUST be used in the contentInfo field.

The KeyAgreeRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.2.

The detailed description of the KeyAgreeRecipientInfo structure looks like this:

            recipientInfo     REQUIRED
    -- MUST be KeyAgreeRecipientInfo as specified in
              version         REQUIRED
    -- MUST be set to 3
              originator     REQUIRED
    -- MUST contain the originatorKey sequence
                algorithm    REQUIRED
    -- MUST be the algorithm identifier of the
    -- static-ephemeral Diffie-Hellmann algorithm
                publicKey    REQUIRED
    -- MUST be the ephemeral public key of the sending party
              ukm            OPTIONAL
    -- MUST be used when 1-pass ECMQV is used  
              keyEncryptionAlgorithm
                             REQUIRED
    -- MUST be the same as in the contentEncryptionAlgorithm field
              recipientEncryptedKeys
                             REQUIRED
    -- MUST be exactly one recipientEncryptedKey sequence
                recipientEncryptedKey
                             REQUIRED
                  rid        REQUIRED
                    rKeyId   REQUIRED
                      subjectKeyID
                             REQUIRED
    -- MUST contain the same value as the senderKID in the respective
    -- request messages
                  encryptedKey
                             REQUIRED
    -- MUST be the encrypted content-encryption key
                        

5.1.6.3. Using key transport key management technique

This key management technique can be applied in combination with the message flow specified in Section 5.1.1 using signature-based protected CMP messages. The public key of the EE certificate used for the signature-based protection of the request message MUST also be used for key encipherment of the content-encryption key. To use this key management technique the KeyTransRecipientInfo structure MUST be used in the contentInfo field.

The KeyTransRecipientInfo structure included into the envelopedData structure is specified in CMS Section 6.2.1.

The detailed description of the KeyTransRecipientInfo structure looks like this:

            recipientInfo     REQUIRED
    -- MUST be KeyTransRecipientInfo as specified in
    -- CMS section 6.2.1 [RFC5652]
              version        REQUIRED
    -- MUST be set to 2
              rid            REQUIRED
                subjectKeyIdentifier
                             REQUIRED
    -- MUST contain the same value as the senderKID in the respective
    -- request messages
              keyEncryptionAlgorithm
                             REQUIRED
    -- MUST contain the key encryption algorithm identifier used for
    -- public key encryption
              encryptedKey   REQUIRED
    -- MUST be the encrypted content-encryption key
                        

5.1.7. Delayed enrollment

This functional extension can be applied in combination with certificate enrollment as described in Section 5.1.1 to Section 5.1.5. The functional extension can be used in case a (L)RA/CA cannot respond to the certificate request in a timely manner, e.g., due to offline upstream communication or required registration officer interaction. Depending on the PKI architecture, it is not necessary that the PKI component directly communicating with the EE initiates the delayed enrollment.

The PKI component initiating the delayed enrollment MUST include the status "waiting" in the response and this response MUST not contain the newly issued certificate. When receiving a response with status "waiting" the EE MUST send a poll request to the (L)RA/CA. The PKI component that initiated the delayed enrollment MUST answers with a poll response containing a checkAfter time. This value indicates the minimum number of seconds that must elapse before the EE sends another poll request. As soon as the (L)RA/CA can provide the final response message for the initial request of the EE, it MUST provide this in response to a poll request. After receiving this response, the EE can continue the original message sequence as described in the respective section of this document, e.g., send a certConf message.

Typically, intermediate PKI entities SHOULD NOT change the sender and recipient nonce even in case an intermediate (L)RA modifies a request or a response message. In the special case of polling between EE and LRA with offline transport between an LRA and RA, see Section 6.1.3, an exception occurs. The EE and LRA exchange pollReq and pollRep messages handle the nonce words as described. When, after pollRep, the final response from the CA arrives at the LRA, the next response will contain the recipientNonce set to the value of the senderNonce in the original request message (copied by the CA). The LRA needs to replace the recipientNonce in this case with the senderNonce of the last pollReq because the EE will validate it in this way.

Message flow:

Step# EE                                   (L)RA/CA
 1   format ir/cr/p10cr/kur
     As described in the
       respective section
       in this document
 2                    ->ir/cr/p10cr/kur->
 3                                        handle request as described 
                                            in the respective section
                                            in this document
 4                                        in case no immediate final
                                            response is possible,
                                            receive or format ip, cp  
                                            or kup message containing 
                                            status "waiting"
 5                      <-  ip/cp/kup  <-
 6   handle ip/cp/kup
 7   format pollReq
 8                      ->   pollReq   ->
 9                                        handle, re-protect or 
                                            forward pollReq
10                                        in case the requested
                                            certificate or a 
                                            corresponding response
                                            message is available,
                                            receive or format ip, cp,
                                            or kup containing the
                                            issued certificate, or
                                          format or receive pollRep 
                                            with appropriate 
                                            checkAfter value
11                      <-   pollRep   <-
12   handle pollRep
13   let checkAfter
       time elapse
14   continue with line 7
                    

Detailed description of the first ip/cp/kup:

Response with status 'waiting'  -- ip/cp/kup

Field                         Value

header
    -- MUST contain a header as described for the first response
    -- message of the respective sheme

body
    -- The response of the (L)RA/CA to the request in case no 
    -- immediate appropriate response can be sent
  ip/cp/kup                   REQUIRED
    response                  REQUIRED
    -- MUST be exactly one CertResponse
      certReqId               REQUIRED
    -- MUST be set to 0
      status                  REQUIRED
    -- PKIStatusInfo structure MUST be present
        status                REQUIRED
    -- MUST be set to "waiting"
        statusString          OPTIONAL
    -- MAY be any human-readable text for debugging, logging or to 
    -- display in a GUI
        failInfo              PROHIBITED
      certifiedKeyPair        PROHIBITED

protection                    REQUIRED
    -- MUST contain protection as described for the first response 
    -- message of the respective profile, but 
    -- MUST use the protection key of the (L)RA/CA initiating the 
    -- delayed enrollment and creating this response message

extraCerts                    REQUIRED
    -- MUST contain certificates as described for the first response
    -- message of the respective profile.
    -- As no new certificate is issued yet, no respective certificate
    -- chain is included.


Polling Request -- pollReq

Field                         Value

header
    -- MUST contain a header as described for the certConf message
    -- of the respective sheme

body
    -- The message of the EE asks for the final response or for a
    -- time to check again
  pollReq                     REQUIRED
    certReqId                 REQUIRED
    -- MUST be exactly one value
    -- MUST be set to 0

protection                    REQUIRED
    -- MUST contain protection as described for the certConf message
    -- of the respective profile

extraCerts                    OPTIONAL
    -- If present, it MUST contain certificates as described for the 
    -- certConf message of the respective profile.


Polling Response -- pollRep

Field                         Value

header
    -- MUST contain a header as described for the pkiConf message
    -- of the respective sheme

body                          pollRep
    -- The message indicated the time to after which the EE may
    -- send another pollReq messaged for this transaction
  pollRep                     REQUIRED
    -- MUST be exactly one set of the following values
    certReqId                 REQUIRED
    -- MUST be set to 0
    checkAfter                REQUIRED
    -- time in seconds to elapse before a new pollReq may be sent by 
    -- the EE

protection                    REQUIRED
    -- MUST contain protection as described for the pkiConf message 
    -- of the respective profile, but 
    -- MUST use the protection key of the (L)RA/CA that initiated the 
    -- delayed enrollment and is creating this response message

extraCerts                    OPTIONAL
    -- If present, it MUST contain certificates as described for the 
    -- pkiConf message of the respective profile.


Final response -- ip/cp/kup

Field                         Value

header
    -- MUST contain a header as described for the first
    -- response message of the respective sheme
    -- but the recipientNonce MUST be the senderNonce of the last 
    -- pollReq message

body
    -- The response of the (L)RA/CA to the initial request as  
    -- described in the respective profile

protection                    REQUIRED
    -- MUST contain protection as described for the first response 
    -- message of the respective profile, but 
    -- MUST use the protection key of the (L)RA/CA that initiated the 
    -- delayed enrollment and forwarding the response message

extraCerts                    REQUIRED
    -- MUST contain certificates as described for the first 
    -- response message of the respective profile 
                    

5.2. Revoking a certificate

This message sequence should be used by an entity to request the revocation of a certificate. Here the revocation request is used by an EE to revoke one of its own certificates. A (L)RA could also act as an EE to revoke one of its own certificates.

The revocation request message MUST be signed using the certificate that is to be revoked to prove the authorization to revoke to the PKI. The revocation request message is signature-protected using this certificate.

An EE requests the revocation of an own certificate at the CA that issued this certificate. The (L)RA/CA responds with a message that contains the status of the revocation from the CA.

Preconditions:

1
The certificate the EE wishes to revoke is not yet expired or revoked.

Message flow:

            
Step# EE                                  (L)RA/CA
  1   format rr
  2                      ->   rr      ->
  3                                        handle, re-protect or
                                             forward rr
  4                                        receive rp
  5                      <-   rp      <-
  6   handle rp
                

For this profile, the EE MUST include exactly one RevDetails structure in the rr. In case no error occurred the response to the rr MUST be an rp message. The (L)RA/CA MUST produce a rp containing a status field with a single set of values.

Detailed message description:

                                                                
Revocation Request -- rr

Field                         Value

header
    -- As described in section 3.1

body
    -- The request of the EE to revoke its certificate
  rr                          REQUIRED
    -- MUST contain exactly one element of type RevDetails
    -- If more revocations are desired, further requests MUST be 
    -- packaged in separate PKI Messages
    certDetails               REQUIRED
    -- MUST be present and is of type CertTemplate
      serialNumber            REQUIRED
    -- MUST contain the certificate serialNumber attribute of the 
    -- X.509 certificate to be revoked
      issuer                  REQUIRED
    -- MUST contain the issuer attribute of the X.509 certificate to
    -- be revoked
    crlEntryDetails           REQUIRED
    -- MUST contain exactly one reasonCode of type CRLReason (see
    -- [RFC5280] section 5.3.1)
    -- If the reason for this revocation is not known or shall not be
    -- published the reasonCode MUST be 0 = unspecified

protection                    REQUIRED
    -- As described in section 3.2 and the private key related to the
    -- certificate to be revoked

extraCerts                    REQUIRED
    -- As described in section 3.3


Revocation Response -- rp

Field                         Value

header
    -- As described in section 3.1

body
    -- The responds of the (L)RA/CA to the request as appropriate
  rp                          REQUIRED
    status                    REQUIRED
    -- MUST contain exactly one element of type PKIStatusInfo
      status                  REQUIRED
    -- positive value allowed: "accepted"
    -- negative value allowed: "rejection"
      statusString            OPTIONAL
    -- MAY be any human-readable text for debugging, logging or to 
    -- display in a GUI
      failInfo                OPTIONAL
    -- MAY be present if and only if status is "rejection"

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
                

5.3. Error reporting

This functionality should be used by an EE to report any error conditions upstream to the (L)RA/CA. Error reporting by the (L)RA downstream to the EE is described in Section 6.3.

In case the error condition is related to specific details of an ip, cp, or kup response message and a confirmation is expected the error condition MUST be reported in the respective certConf message with negative contents.

General error conditions, e.g., problems with the message header, protection, or extraCerts, and negative feedback on rp, pollRep, or pkiConf messages MAY be reported in the form of an error message.

In both situations the error is reported in the PKIStatusInfo structure of the respective message.

The (L)RA/CA MUST respond to an error message with a pkiConf message, or with another error message if any part of the header is not valid. Both sides MUST treat this message as the end of the current transaction.

The PKIStatusInfo structure is used to report errors. The PKIStatusInfo structure SHOULD consist of the following fields:

Detailed error message description:

                                                                
Error Message -- error

Field                         Value

header
    -- As described in section 3.1

body
    -- The message sent by the EE or the (L)RA/CA to indicate an
    -- error that occurred
  error                       REQUIRED
    pKIStatusInfo             REQUIRED
      status                  REQUIRED
    -- MUST have the value "rejection"
      statusString            RECOMMENDED
    -- SHOULD be any human-readable text for debugging, logging 
    -- or to display in a GUI
      failInfo                OPTIONAL
    -- MAY be present

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    OPTIONAL
    -- As described in section 3.3
                

5.4. Support messages

The following support messages offer on demand in-band transport of content that may be provided by the (L)RA/CA and relevant to the EE. The general messages and general response are used for this purpose. Depending on the environment, these requests are answered by the LRA, RA, or CA.

The general message and general response transport InfoTypeAndValue structures. In addition to those infoType values defined in CMP further OIDs MAY be defined to define new PKI management operations, or general-purpose messages as needed in a specific environment.

Possible content described here address:

5.4.1. General message and response

The general message transaction is similar to that given in CMP Appendix E.5. In this section the general message (genm) and general response (genp) are described. The specific InfoTypeAndValue structures are described in the following sections.

The behavior in case an error occurs is described in Section 5.3.

Message flow:

Step# EE                                   (L)RA/CA
 1   format genm
 2                      ->   genm    ->
 3                                        handle, re-protect or  
                                            forward genm
 4                                        format or receive genp
 5                      <-   genp    <-
 6   handle genp
                

Detailed message description:

General Message -- genm

Field                         Value

header
    -- As described in section 3.1

body
    -- The request of the EE to receive information
  genm                        REQUIRED
    -- MUST contain exactly one element of type 
    -- InfoTypeAndValue
    infoType                  REQUIRED
    -- MUST be the OID identifying the specific scheme
    -- described below
    infoValue                 OPTIONAL
    -- MUST be as described in the specific scheme described
    -- below

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
    -- As described in section 3.3


General Response -- genp

Field                         Value

header
    -- As described in section 3.1

body
    -- The response of the (L)RA/CA to the information request
  genp                        REQUIRED
    -- MUST contain exactly one element of type
    -- InfoTypeAndValue
    infoType                  REQUIRED
    -- MUST be the OID identifying the specific scheme
    -- described below
    infoValue                 OPTIONAL
    -- MUST be as described in the specific scheme described
    -- below

protection                    REQUIRED
    -- As described in section 3.2

extraCerts                    REQUIRED
    -- As described in section 3.3
                

5.4.2. Get CA certiificates

This scheme can be used by an EE to request CA certificates from the (L)RA/CA.

An EE requests CA certificates from the (L)RA/CA by sending a general message with OID id-it-getCaCerts. The (L)RA/CA responds with a general response with the same OID that either contains a SEQUENCE of certificates populated with the available CA intermediate and issuing CA certificates or with no content in case no CA certificate is available.

< NOTE: The OID id-it-getCaCerts is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >

The profile for this exchange is as given in Section 5.4.1, with the following specific content:

1
the body MUST contain as infoType the OID id-it-getCaCerts
2
the infoValue of the request MUST be absent
3
if present, the infoValue of the response MUST be caCerts field

The infoValue field of the general response containing the id-it-getCaCerts OID looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no CA certificate is available
    -- MUST be present if CA certificates are available
        caCerts               REQUIRED
    -- MUST be present if infoValue is present
    -- MUST be a sequence of CMPCertificate
                

5.4.3. Get root CA certificate update

This scheme can be used by an EE to request an update of an existing root CA Certificate by the EE. It utilizes the root CA key update announcement message as described in CMP Appendix E.4 as response to a respective general message.

An EE requests a root CA certificate update from the (L)RA/CA by sending a general message with OID id-it-caKeyUpdateInfo. The (L)RA/CA responds with a general response with the same OID that either contains the update of the root CA certificate consisting of three certificates, or with no content in case no update is available. These three certificates are described in more detail in section 4.4.1, section 6.2, and Appendix E.3 of [RFC4210].

The profile for this exchange is as given in Section 5.4.1, with the following specific content:

1
the body MUST contain as infoType the OID id-it-caKeyUpdateInfo
2
the infoValue of the request MUST be absent
3
if present, the infoValue of the response MUST be a CAKeyUpdAnnContent structure

The infoValue field of the general response containing the id-it-caKeyUpdateInfo extension looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no update of the root CA certificate is
       available
    -- MUST be present if an update of the root CA certificate
    -- is available
        caKeyUpdateInfo       REQUIRED
    -- MUST be present and be of type CAKeyUpdAnnContent
          oldWithNew          REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain an X.509 certificate containing the old public
    -- root CA key signed with the new private root CA key
          newWithOld          REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain an X.509 certificate containing the new public
    -- root CA key signed with the old private root CA key
          newWithNew          REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain the new root CA certificate
                

5.4.4. Get certificate request parameters

This scheme can be used by an EE to request configuration parameters for a planned certificate request transaction.

An EE requests certificate request parameters from the (L)RA/CA by sending a general message with OID id-it-getCSRParam. The (L)RA/CA responds with a general response with the same OID that either contains the required fields, e.g., algorithm identifier for key pair generation or other attributes and extensions or with no content in case no specific requirements are made by the (L)RA/CA.

< NOTE: The OID id-it-getCSRParam is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >

The EE SHOULD follow the requirements from the recieved CertTemplate and the optional RSA key length. In case a field is present but the value is absent, it means that this field is required but its content has to be provided by the EE.

The profile for this exchange is as given in Section 5.4.1, with the following specific content:

1
the body MUST contain as infoType the OID id-it-getCSRParam
2
the infoValue of the request MUST be absent
3
if present, the infoValue of the response MUST be a SEQUENCE of a certTemplate structure and an rsaKeyLen field of type INTEGER

The infoValue field of the general response containing the id-it-getCSRParam OID looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no requirements are available
    -- MUST be present if the (L)RA/CA has any requirements on the 
    -- content of the certificates to be requested.
        certTemplate          REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain the prefilled certTemplate structure
        rsaKeyLen             OPTIONAL
    -- This field is of type INTEGER. Any reasonable RSA key length 
    -- SHOULD be specified if the algorithm in the  
    -- subjectPublicKeyInfo field of the certTemplate is of type
    -- rsaEncryption.
                

5.4.5. Get certificate management configuration

This scheme can be used by an EE to request the current certificate management configuration information by the EE in advance to a planned certificate management transaction, e.g., in case no out-of-band transport is available. Such certificate management configuration can consist of all information the EE needs to know to generate and deliver a proper certificate request, such as

There is an overlap with Section 5.4.2 with regard to transport of CA certificates and with Section 5.4.4 with regard to key generation parameter and certificate request attributes and extensions. This profile offers to request a proprietary configuration file containing all information needed in one exchange.

An EE requests certificate management configuration from the (L)RA/CA by sending a general message with the OID id-it-getCertMgtConfig. The (L)RA/CA responds with a general response with the same OID that either contains a certMgtConfig field containing the configuration file encoded as OCTET STRING or with no content in case no certificate management configuration is available.

< NOTE: The OID id-it-getCertMgtConfig is not yet defined. It should be registered in the tree 1.3.6.1.5.5.7.4 (id-it) like other infoType OIDs, see CMP Appendix F on page 92. >

The EE SHOULD use the contents of this certMgtConfig to format and deliver the certificate request. The certificate management configuration may contain contact details, e.g., like an URI and issuing CA distinguished name, where to address the request messages to and may also contain certificate request parameters as described in Section 5.4.4.

The certMgtConfig field may be of any format suitable for the EE, e.g., CMS, JWT or, XML. The certMgtConfig contents MAY be signed, e.g., like CMS SignedData, JWS or, XML-DSig. For interoperability the format of the certMgtConfig field should be specified in detail if needed.

The profile for this exchange is as given in Section 5.4.1, with the following specific content:

1
the body MUST contain as infoType the OID id-it-getCertMgtConfig
2
the infoValue of the request MUST be absent
3
if present, the infoValue of the response MUST be a certMgtConfig structure

The infoValue field of the general response containing the id-it-getCertMgtConfig extension looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no certificate management configuration
    -- is available
    -- MUST be present if the (L)RA/CA provides any certificate 
    -- management configuration
        certMgtConfig         REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain the certificate management configuration as OCTET 
    -- OCTET STRING
                

5.4.6. Get enrollment voucher

This scheme can be used by an EE to request an enrollment voucher containing the root certificate of a new, additional, or alternative PKI to establish trust in this PKI, e.g., in case no out-of-band transport is available. Such an enrollment voucher can be used in advance to an enrollment to this new environment. It may contain further information depending on the use case.

An EE requests an enrollment voucher from the (L)RA/CA by sending a general message. The (L)RA/CA responds with a general response with the same OID that either contains the voucher or with no content in case no voucher is available.

The (L)RA MAY use the content of the voucherRequest to get an enrollment voucher from other backend components, e.g., as described in BRSKI. The EE SHOULD use the contents of the received enrollmentVoucher to authenticate the (L)RA/CA it is about to enroll to. The enrollment voucher may for example contain the Root CA certificate of the new PKI or the CMP signer certificate of the (L)RA. The general response message MUST be properly authenticated and the sender of this message MUST be authorized to install new root certificates. One example for an enrollment voucher is specified in RFC8366.

The voucherRequest and enrollmentVoucher fields may be of any format suitable for the EE, e.g., CMS, JWT or, XML. The voucherRequest and enrollmentVoucher contents MAY contain a signature, e.g., CMS SignedData, JWS or, XML-DSig. For interoperability the format of the voucherRequest and enrollmentVoucher field schould be specified in detail if needed, e.g., as defined in BRSKI and RFC8366.

< TBD: The vontent of the voucherRequest and enrollmentVoucher fields can also be linited to the specufucations in BRSKI and RFC8366. >

The profile for this exchange is as given in Section 5.4.1, with the following specific content:

1
the body MUST contain as infoType the OID id-it-getEnrollmentVoucher
2
if present, the infoValue of the request MUST be a voucherRequest structure
3
if present, the infoValue of the response MUST be an enrollmentVoucher structure

The infoValue field of the general message containing the id-it-getEnrollmentVoucher extension looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no voucher request is available
    -- MUST be present if the EE provides the voucher request
        voucherRequest        REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain the voucher request as OCTET STRING
                

The infoValue field of the general response containing the id-it-getEnrollmentVoucher extension looks like this:

      infoValue               OPTIONAL
    -- MUST be absent if no enrollment voucher is available
    -- MUST be present if the (L)RA/CA provides the enrollment
    -- voucher
        enrollmentVoucher     REQUIRED
    -- MUST be present if infoValue is present
    -- MUST contain the enrollment voucher as OCTET STRING
                

6. LRA and RA focused certificate management use cases

This chapter focuses on the communication of PKI backend components with each other. Depending on the network and PKI solution design, these will either be an LRA, RA or CA.

Typically, an (L)RA forwards messages from downstream, but it may also reply to them itself. Besides forwarding of received messages an (L)RA could also need to revoke certificates of EEs, report errors, or may need to manage its own certificates.

< In CMP Updates additional extended key usages like id-kp-cmpRA will be defined to indicate that a key pair is entitled to be used for signature-based protection of a CMP message by an (L)RA/CA. >

6.1. Forwarding of messages

Each CMP request message (i.e., ir, cr, p10cr, kur, pollReq, or certConf) or error message coming from an EE or the previous (downstream) PKI component MUST be sent to the next (upstream) PKI component. This PKI component MUST forward response messages to the next (downstream) PKI component or EE.

The (L)RA SHOULD verify the protection, the syntax, the required message fields, the message type, and if applicable the authorization and the proof-of-possession of the message. Additional checks or actions MAY be applied depending on the PKI solution requirements and concept. If one of these verification procedures fails, the (L)RA SHOULD respond with a negative response message and SHOULD not forward the message further upstream. General error conditions should be handled as described in Section 5.3 and Section 6.3.

An (L)RA SHOULD not change the received message if not necessary. The (L)RA SHOULD only update the message protection if it is technically necessary. Concrete PKI system specifications may define in more detail if and when to do so.

This is particularly relevant in the upstream communication of a request message.

Each hop in a chain of PKI components has one or more functionalities, e.g.,

Therefore, the decision if a message should be forwardedCP/CPS).

depends on the PKI solution design and the associated security policy (

This section specifies the different options an (L)RA may implement and use.

An (L)RA MAY update the protection of a message

This is particularly relevant in the upstream communication of certificate request messages.

The message protection covers only the header and the body and not the extraCerts. The (L)RA MAY change the extraCerts in any of the following message adaptations, e.g., to sort or add needed or to delete needless certificates to support the next hop. This may be particularly helpful to extend upstream messages with additional certificates or to reduce the number of certificates in downstream messages when forwarding to constrained devices.

6.1.1. Not changing protection

This message adaptation can be used by any (L)RA to forward an original CMP message without changing the header, body or protection. In any of these cases the (L)RA acts more like a proxy, e.g., on a network boundary, implementing no specific RA-like security functionality to the PKI.

This message adaptation MUST be used for forwarding kur messages that must not be approved by the respective (L)RA.

6.1.2. Replacing protection

The following two message adaptations can be used by any (L)RA to forward a CMP message with or without changes, but providing its own protection using its CMP signer key providing approval of this message. In this case the (L)RA acts as an actual Registration Authority (RA), which implements important security functionality of the PKI.

Before replacing the existing protection by a new protection, the (L)RA MUST verify the protection provided by the EE or by the previous PKI component and approve its content including any own modifications. For certificate requests the (L)RA MUST verify in particular the included proof-of-possession self-signature of the certTemplate using the public key of the requested certificate and MUST check that the EE, as authenticated by the message protection, is authorized to request a certificate with the subject as specified in the certTemplate.

In case the received message has been protected by a CA or another (L)RA, the current (L)RA MUST verify its protection and approve its content including any own modifications. For certificate requests the (L)RA MUST check that the other (L)RA, as authenticated by the message protection, is authorized to issue or forward the request.

These message adaptations MUST NOT be applied to kur request messages as described in Section 5.1.3 since their original protection using the key and certificate to be updated needs to be preserved, unless the regCtrl OldCertId is used to clearly identify the certificate to be updated.

6.1.2.1. Keeping proof-of-possession

This message adaptation can be used by any (L)RA to forward a CMP message with or without modifying the message header or body while preserving any included proof-of-possession.

By replacing the existing using its own CMP signer key the (L)RA provides a proof of verifying and approving of the message as described above.

In case the (L)RA modifies the certTemplate of an ir or cr message, the message adaptation in Section 6.1.2.2 needs to be applied instead.

6.1.2.2. Breaking proof-of-possession

This message adaptation can be used by any (L)RA to forward an ir or cr message with modifications of the certTemplate i.e., modification, addition, or removal of fields. Such changes will break the proof-of-possession provided by the EE in the original message.

By replacing the existing or applying an initial protection using its own CMP signer key the (L)RA provides a proof of verifying and approving the new message as described above.

In addition to the above the (L)RA MUST verify in particular the proof-of-possession contained in the original message as described above. If these checks were successfully performed the (L)RA MUST change the popo to raVerified.

The popo field MUST contain the raVerified choice in the certReq structure of the modified message as follows:

                                                                
    popo
      raVerified              REQUIRED
    -- MUST have the value NULL and indicates that the (L)RA 
    -- verified the popo of the original message.
                        

6.1.3. Initiating delayed enrollment

This message adaptation can be used by an (L)RA to initiate delayed enrollment. In this case a (L)RA/CA MUST add the status waiting in the response message. The (L)RA/CA MUST then reply to the pollReq messages as described in Section 5.1.7.

6.2. Revoking certificates on behalf of another's entities

This message sequence can be used by an (L)RA to revoke a certificate of any other entity. This revocation request message MUST be signed by the (L)RA using its own CMP signer key to prove to the PKI authorization to revoke the certificate on behalf of the EE.

The general message flow for this profile is the same as given in section Section 5.2.

Preconditions:

1
the certificate to be revoked MUST be known to the (L)RA
2
the (L)RA MUST have the authorization to revoke the certificates of other entities issued by the corresponding CA

The profile for this exchange is identical to that given in section Section 5.2, with the following changes:

1
it is not required that the certificate to be revoked is not yet expired or revoked
2
the (L)RA acts as EE for this message exchange
3
the rr messages MUST be signed using the CMP signer key of the (L)RA.

6.3. Error reporting

This functionality should be used by the (L)RA to report any error conditions downstream to the EE. Potential error reporting by the EE upstream to the (L)RA/CA is described in Section 5.3.

In case the error condition is related to specific details of an ir, cr, p10cr, or kur request message it MUST be reported in the specific response message, i.e., an ip, cp, or kup with negative contents.

General error conditions, e.g., problems with the message header, protection, or extraCerts, and negative feedback on rr, pollReq, certConf, or error messages MUST be reported in the form of an error message.

In both situations the (L)RA reports the errors in the PKIStatusInfo structure of the respective message as described in Section 5.3.

An EE receiving any such negative feedback SHOULD log the error appropriately and MUST terminate the current transaction.

7. CMP message transport variants

The CMP messages are designed to be self-contained, such that in principle any transport can be used. HTTP SHOULD be used for online transport while file-based transport MAY be used in case offline transport is required. In case HTTP transport is not desired or possible, CMP messages MAY also be piggybacked on any other reliable transport protocol, e.g., CoAP.

Independently of the means of transport it could happen that messages are lost, or a communication partner does not respond. In order to prevent waiting indefinitely, each CMP client component SHOULD use a configurable per-request timeout, and each CMP server component SHOULD use a configurable per-response timeout in case a further message is to be expected from the client side. In this way a hanging transaction can be closed cleanly with an error and related resources (for instance, any cached extraCerts) can be freed.

7.1. HTTP transport

This transport mechanism can be used by an EE and (L)RA/CA to transfer CMP messages over HTTP. If HTTP transport is used the specifications as described in [RFC6712] MUST be followed.

7.2. HTTPS transport using certificates

This transport mechanism can be used by an EE and (L)RA/CA to further protect the HTTP transport as described in Section 7.1 using TLS 1.2 or TLS 1.3 as described in [RFC2818] with certificate-based authentication. Using this transport mechanism, the CMP transport via HTTPS MUST use TLS server authentication and SHOULD use TLS client authentication.

EE:

(L)RA:

NOTE: The requirements for checking certificates given in [RFC5280], [RFC5246] and [RFC8446] MUST be followed for the TLS layer. OCSP or CRLs SHOULD be used for status checking of the TLS certificates of communication partners.

7.3. HTTPS transport using shared secrets

This transport mechanism can be used by an EE and (L)RA/CA to further protect the HTTP transport as described in Section 7.1 using TLS 1.2 or TLS 1.3 as described in [RFC2818] with mutual authentication based on shared secrets as described in [RFC5054].

EE:

(L)RA:

7.4. File-based transport

For offline transfer file-based transport MAY be used. Offline transport is typically used between LRA and RA nodes.

Connection and error handling mechanisms like those specified for HTTP in [RFC6712] need to be implemented.

< Details need to be defined later >

7.5. CoAP transport

In constrained environments where no HTTP transport is desired or possible, CoAP MAY be used instead. Connection and error handling mechanisms like those specified for HTTP in [RFC6712] may need to be implemented.

Such specification is out of scope of this document and would need to be specifies in a separate document.

7.6. Piggybacking on other reliable transport

For online transfer where no HTTP transport is desired or possible CMP messages MAY also be transported on some other reliable protocol. Connection and error handling mechanisms like those specified for HTTP in [RFC6712] need to be implemented.

Such specification is out of scope of this document and would need to be specifies in a separate document, e.g., in the scope of the respective transport protocol used.

8. IANA Considerations

<Add any IANA considerations>

9. Security Considerations

<Add any security considerations>

10. Acknowledgements

We would like to thank the various reviewers of this CMP profile.

11. References

11.1. Normative References

[I-D.brockhaus-lamps-cmp-updates] Brockhaus, H., "CMP Updates", Internet-Draft draft-brockhaus-lamps-cmp-updates-00, July 2019.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.
[RFC2986] Nystrom, M. and B. Kaliski, "PKCS #10: Certification Request Syntax Specification Version 1.7", RFC 2986, DOI 10.17487/RFC2986, November 2000.
[RFC4086] Eastlake 3rd, D., Schiller, J. and S. Crocker, "Randomness Requirements for Security", BCP 106, RFC 4086, DOI 10.17487/RFC4086, June 2005.
[RFC4210] Adams, C., Farrell, S., Kause, T. and T. Mononen, "Internet X.509 Public Key Infrastructure Certificate Management Protocol (CMP)", RFC 4210, DOI 10.17487/RFC4210, September 2005.
[RFC4211] Schaad, J., "Internet X.509 Public Key Infrastructure Certificate Request Message Format (CRMF)", RFC 4211, DOI 10.17487/RFC4211, September 2005.
[RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., Housley, R. and W. Polk, "Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008.
[RFC5652] Housley, R., "Cryptographic Message Syntax (CMS)", STD 70, RFC 5652, DOI 10.17487/RFC5652, September 2009.
[RFC6712] Kause, T. and M. Peylo, "Internet X.509 Public Key Infrastructure -- HTTP Transfer for the Certificate Management Protocol (CMP)", RFC 6712, DOI 10.17487/RFC6712, September 2012.

11.2. Informative References

[ETSI-3GPP] 3GPP, "TS33.310; Network Domain Security (NDS); Authentication Framework (AF); Release 16; V16.1.0", December 2018.
[I-D.ietf-anima-bootstrapping-keyinfra] Pritikin, M., Richardson, M., Eckert, T., Behringer, M. and K. Watsen, "Bootstrapping Remote Secure Key Infrastructures (BRSKI)", Internet-Draft draft-ietf-anima-bootstrapping-keyinfra-29, October 2019.
[IEC62443-3-3] IEC, "Industrial communication networks - Network and system security - Part 3-3: System security requirements and security levels", IEC 62443-3-3, August 2013.
[IEEE802.1AR] IEEE, "802.1AR Secure Device Identifier", June 2018.
[NIST-CSFW] NIST, "Framework for Improving Critical Infrastructure Cybersecurity Version 1.1", April 2018.
[RFC2818] Rescorla, E., "HTTP Over TLS", RFC 2818, DOI 10.17487/RFC2818, May 2000.
[RFC3647] Chokhani, S., Ford, W., Sabett, R., Merrill, C. and S. Wu, "Internet X.509 Public Key Infrastructure Certificate Policy and Certification Practices Framework", RFC 3647, DOI 10.17487/RFC3647, November 2003.
[RFC5054] Taylor, D., Wu, T., Mavrogiannopoulos, N. and T. Perrin, "Using the Secure Remote Password (SRP) Protocol for TLS Authentication", RFC 5054, DOI 10.17487/RFC5054, November 2007.
[RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security (TLS) Protocol Version 1.2", RFC 5246, DOI 10.17487/RFC5246, August 2008.
[RFC7252] Shelby, Z., Hartke, K. and C. Bormann, "The Constrained Application Protocol (CoAP)", RFC 7252, DOI 10.17487/RFC7252, June 2014.
[RFC7515] Jones, M., Bradley, J. and N. Sakimura, "JSON Web Signature (JWS)", RFC 7515, DOI 10.17487/RFC7515, May 2015.
[RFC7519] Jones, M., Bradley, J. and N. Sakimura, "JSON Web Token (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015.
[RFC8366] Watsen, K., Richardson, M., Pritikin, M. and T. Eckert, "A Voucher Artifact for Bootstrapping Protocols", RFC 8366, DOI 10.17487/RFC8366, May 2018.
[RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018.
[UNISIG] UNISIG, "Subset-137; ERTMS/ETCS On-line Key Management FFFIS; V1.0.0", December 2015.
[W3C_XML] W3C, "Extensible Markup Language (XML) 1.0", W3C XML, November 2008.
[W3C_XML-Dsig] W3C, "XML Signature Syntax and Processing Version 2.0", W3C XML-DSIG, July 2015.

Appendix A. Additional Stuff

This becomes an Appendix.

Authors' Addresses

Hendrik Brockhaus Siemens AG Otto-Hahn-Rin 6 Munich, 81739 Germany EMail: hendrik.brockhaus@siemens.com URI: http://www.siemens.com/
Steffen Fries Siemens AG Otto-Hahn-Ring 6 Munich, 81739 Germany EMail: steffen.fries@siemens.com URI: http://www.siemens.com/
David von Oheimb Siemens AG Otto-Hahn-Ring 6 Munich, 81739 Germany EMail: david.von.oheimb@siemens.com URI: http://www.siemens.com/