TOC 
N/AD. Brashear
Internet-DraftOpenAFS Project
Intended status: BCPAugust 24, 2010
Expires: February 25, 2011 


Authentication Name Mapping extension for AFS-3 Protection Service
draft-brashear-afs3-pts-extended-names-03

Abstract

This document describes the extension of the format, use and communication of authentication names in the AFS-3 protocol to allow for additional authentication mechanisms to be represented and mapped to AFS IDs, independent of the AFS usernames currently used for management of PRDB entries. The new interface provides mechanisms for adding, removing, and listing mappings, and to allow the fileserver to map an authentication name to a PTS identity.

Status of this Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”

This Internet-Draft will expire on February 25, 2011.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.



Table of Contents

1.  Introduction
2.  Conventions Used in this Document
3.  Background information on operation of AFS
4.  Error Codes
5.  Existing Protocol Constants
6.  Existing Per-Identity Permission Flags
7.  RPC Interface
    7.1.  New Data Types
    7.2.  Authentication Name Types
    7.3.  GetCapabilities RPC
    7.4.  Authentication name mapping RPCs
        7.4.1.  AuthNameToID
        7.4.2.  AuthNameToIDFallback
        7.4.3.  ListAuthNames
        7.4.4.  WhoAmI
        7.4.5.  AddAuthName
        7.4.6.  RemoveAuthName
8.  Recommended Usage
9.  Compatibility
10.  Authentication Name Types
    10.1.  Kerberos V4
    10.2.  Kerberos V5
    10.3.  GSSAPI Export Names
    10.4.  Authentication Name Type Rewriting
11.  Security Considerations
12.  IANA Considerations
13.  AFS-3 Registry Considerations
14.  Acknowledgments
15.  References
    15.1.  Normative References
    15.2.  Informational References
§  Author's Address




 TOC 

1.  Introduction

AFS-3 provides an authentication ID mapping service to map authentication system names in Kerberos Version 4 format to AFS-3 numeric identifiers. An augmented Kerberos 4 server was historically part of the AFS-3 protocol and service suite.

Security issues with Kerberos 4 as well as additional development in the space of authentication systems has created the need to map authentication names from other deployed systems to AFS identifiers. Some deployments provide several mechanisms to obtain AFS authentication; While mappings between Kerberos 4 and Kerberos 5 (Kohl, J. and B. Neuman, “The Kerberos Network Authentication Service (V5),” September 1993.) [RFC1510] authentication names allow use of most Kerberos 5 deployments with AFS, supporting more than a single realm requires matching usernames in all realms. Additionally, support for other systems is not provided at all.

An administrator or a user may know which authentication identities belong to the same individual, service, or role. However, not all deployments need to support interactive remapping; One use case could involve re-exporting another naming service via the AFS-3 PTS protocol, in which case only the name to identifier and identifier to name services would be provided.

The deployment implications for a mapping service are described below in Section 8 (Recommended Usage).



 TOC 

2.  Conventions Used in this Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119] (Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” March 1997.).



 TOC 

3.  Background information on operation of AFS

AFS is a distributed file system organized administratively into cells. In current practice, each AFS cell consists of one or more Volume Location Database (VLDB) servers, one or more Protection Service (PTS) servers, and one or more pairs of file servers and volume servers, plus possibly additional services not relevant to this document. Data stored in AFS is divided into collections of files called volumes. An AFS protocol client, when accessing a file within a specific AFS cell, first contacts a VLDB server for that cell to determine the file server for the AFS volume in which that file is located, and then contacts that file server directly to access the file. A client may also need to contact a PTS server for that cell to register before accessing files in that cell. All communication is via remote procedure calls ('RPCs'), both between component servers and between clients and servers.

Because AFS provides for authenticated access to data, it is necessary to map authentication entities, generally corresponding to users of the AFS file service ('users') or services requiring access to data via the AFS file service ('services'), collectively clients of the AFS file service ('clients'), to AFS authentication identifiers ('AFS IDs'). The PTS service is used to provide this service to the file server when required, typically when a client first contacts a file server with a new authentication context, including unauthenticated. AFS originally included a Kerberos authentication (KA) server implementing the Kerberos 4 protocol as well as the AFS-3 KA protocol for obtaining authentication information. Because of this, PTS authentication names take the format typically used to represent a Kerberos 4 authentication identity as a string, namely, principal name, followed by a dot and instance if there is an instance, followed by an at-sign and the cell name if the cell is not the local cell.



 TOC 

4.  Error Codes

AFS uses a library (com_err) and a tool from the MIT Project Athena suite (compile_et) to generate unique error codes protocol-wide. Codes are generated from a base value computed using a 4 or fewer character string known as an error table, identifying the subset of functionality which generated the error. All error codes are represented as signed 32 bit integers. The base value for PTS errors is 267264, generated from the error table name 'PT'. All RPCs when implemented are expected to return PTS errors. It is also possible for an implementation to support only part of this proposal. As such, any unimplemented RPCs should return error -455 (RXGEN_OPCODE), the error indicating an RPC is unsupported. No new errors are defined as part of this draft.

The existing error code PRPERM shall be used for permission errors due to insufficient privilege when attempting any of the described RPCs.



 TOC 

5.  Existing Protocol Constants

When it is necessary to represent an identity which has provided either no authentication information, or information which does not include a corresponding AFS ID, an anonymous ID is defined and used.

      #define      ANONYMOUSID     32766

The AFS ID 32766 shall be returned when an authentication name is unknown.



 TOC 

6.  Existing Per-Identity Permission Flags

The PTS service includes a basic security model based around defined access flags. The flags are represented as 5 fields, each of which can have 3 values. One of these fields, the "s" field, is used to control who can get information about the entity. Valid values are 'S', which maps to PRP_STATUS_ANY, meaning anyone can get the information; 's', which maps to PRP_STATUS_MEM, meaning only members, the entity owner, and administrators can get the information; and '-' (or unset), meaning only the entity owner and administrators can get the information.



 TOC 

7.  RPC Interface

Six new RPCs are defined for the AFS PTS service; Five of these are used to manipulate data related to authentication names, while the sixth is a general-purpose RPC to be used for capabilities indication. Additionally, several new data types are defined to allow representation of authentication names and identifiers in these new RPCs.



 TOC 

7.1.  New Data Types

In order to represent a set of AFS IDs, the nidlist type is defined. AFS IDs are expected to be enhanced to allow a larger set of IDs concurrently with this advancement of this proposal.

      typedef afs_int64 nidlist<>;

A list of AFS IDs, represented as 64 bit integers.

Authentication names are expected to be mechanism-specific. Thus, an authentication-type agnostic data structure must be provided to represent these names. An implementing server is expected to be able to use a bitwise comparison operation on the data portion of a PrAuthName; Support for all available name types is not expected.

      #define AUTHDATAMAX 2048
      #define AUTHPRINTABLEMAX 2048
      struct PrAuthName {
        afs_int32 kind;
        opaque data<AUTHDATAMAX>;
        opaque display<AUTHPRINTABLEMAX>; };

Because some mechanisms will provide name data which is not human-readable, and because no single format is sufficient to represent all possible mechanism authentication names, the PrAuthName data structure includes an integer tag denoting type, and an opaque data object representing the mechanism-specific authentication name data. The display portion is to be used for display to end-users, and MUST NOT be used for comparison purposes. If a display portion is not provided, the data portion MUST NOT be used directly for user display purposes. A client with knowledge of the particular name type used MAY use the data portion to derive a suitable display name, if none is provided.

      typedef struct PrAuthName authnamelist<>;

Because each AFS ID is expected to have more than one name mapped to it, and possibly will have more than one name of each type assigned to the same AFS ID, it is necessary to support a list of PrAuthNames.



 TOC 

7.2.  Authentication Name Types

The PrAuthName data type includes a 32 bit integer field to represent the kind of authentication being mapped. It is proposed that in addition to mappings for legacy Kerberos 4 based AFS names, that the first version of this additionally include mappings for Kerberos 5-based and GSSAPI-based authentication names.

      #define PRAUTHTYPE_KRB4 XXX
      #define PRAUTHTYPE_KRB5 XXX
      #define PRAUTHTYPE_GSS XXX


 TOC 

7.3.  GetCapabilities RPC

As with other AFS services, the PTS service could be enhanced with the ability to represent new abilities to file servers and clients. We propose a new general-purpose RPC of the type implemented by other AFS services, namely, a bit stream. It is proposed that the first 32 bits be allocated to capabilities flags, while the remainder be reserved for future standardisation.

A complying server MUST implement GetCapabilities.

      const PTSCAPABILITIESMAX = 196;
      typedef afs_uint32 PrCapabilities<PTSCAPABILITIESMAX>;

      const PTS_CAPABILITY_AUTHNAMEMAPPING       = XXX;

      GetCapabilities(
      PrCapabilities *prcapabilities
      ) multi = XXX;

An implementing server should return any capabilities data it wishes to advertise. A server may choose to not advertise the same capabilities to all callers; For instance, the set of capabilities advertised to an authenticated caller may be different than the set advertised to an anonymous caller. In addition to the bitstream, return value is 0 for success, or a PTS error in the event of error.



 TOC 

7.4.  Authentication name mapping RPCs

In addition to the general-purpose (GetCapabilities) RPC needed to represent this extended functionality, a complying server will include RPCs to represent the mapping of extended names to AFS IDs.



 TOC 

7.4.1.  AuthNameToID

A complying server MUST implement the AuthNameToID RPC. This RPC is used to convert one or more authentication names, obtained by a file server or client in a mechanism-specific manner, to AFS IDs.

      AuthNameToID(IN authnamelist *alist,
                   OUT nidlist *ilist) = XXX;

For each authname provided in alist, an AFS ID will be provided in ilist at the corresponding position. Where an authentication name cannot be looked up, the AFS ID in list will be ANONYMOUSID.

On success of the call, 0 shall be returned. Success includes calls where none of the identities provided in authnamelist can be mapped to AFS IDs.

A client being used to manipulate mappings SHOULD use this RPC to discover the existing mapping, if any, for a given authentication name. A caller using the mapping service for service operation SHOULD instead call AuthNameToIDFallback.



 TOC 

7.4.2.  AuthNameToIDFallback

A complying server MUST implement the AuthNameToIDFallback RPC. This RPC is used to convert one or more authentication names, obtained by a file server or client in a mechanism-specific manner, to AFS IDs to be used in making authorization decisions related to the named authentication identities.

      AuthNameToIDFallback(IN authnamelist *alist,
                   OUT nidlist *ilist) = XXX;

For each authname provided in alist, an AFS ID will be provided in ilist at the corresponding position. Implicit fallback mappings will be used to map identities where no explicit mapping is provided. Where neither an explicit nor implicit mapping is available, the AFS ID in ilist will be ANONYMOUSID.

On success of the call, 0 shall be returned. Success includes calls where none of the identities provided in authnamelist can be mapped to AFS IDs.

A caller using the mapping service for service operation SHOULD use this RPC. A client being used to manipulate mappings SHOULD use AuthNameToID instead.



 TOC 

7.4.3.  ListAuthNames

A complying server SHOULD implement the ListAuthNames RPC. This RPC is used to list all authentication names attached to the provided AFS ID.

      ListAuthNames(IN afs_int64 id, OUT authnamelist *alist) = XXX;

On success, 0 shall be returned, along with the list of authentication names in alist corresponding to the AFS ID provided in id.



 TOC 

7.4.4.  WhoAmI

A complying server SHOULD implement the WhoAmI RPC. This RPC is used to return the current authentication name and AFS ID for a caller to the caller.

      WhoAmI(OUT afs_int64 id, OUT struct PrAuthName *alist) = XXX;

On success, 0 shall be returned, along with the identity and authentication name corresponding to the caller of the RPC.



 TOC 

7.4.5.  AddAuthName

A complying server MAY implement the AddAuthName RPC. This RPC is used to add an authentication name to an existing AFS ID.

      AddAuthName(IN afs_int64 id, IN PrAuthName *aname) = XXX;

On success, 0 shall be returned. If the authentication name provided is already mapped to another AFS ID, PREXIST shall be returned. If the AFS ID specified does not exist, PRNOENT shall be returned.



 TOC 

7.4.6.  RemoveAuthName

A complying server MAY implement the RemoveAuthName RPC. This RPC is used to remove an authentication name from an existing AFS ID.

      RemoveAuthName(IN PrAuthName *aname) = XXX;

On success, 0 shall be returned. If the authentication name provided is not mapped, PRNOENT shall be returned.



 TOC 

8.  Recommended Usage

Two classes of service providers are possible. In one, where data is provided in a read-only fashion from an alternate authorization service, only the AuthNameToID and ListAuthNames RPCs are required. In the other, all RPCs are needed, such that mappings can be constructed and maintained.

The ListAuthNames operation should be permitted for administrators as well as for the owner of the entry to be listed. If the 'S' (PRP_STATUS_ANY) bit is set on the entry, then other users may also perform this operation.

The AddAuthName and RemoveAuthName operations should always be permitted for administrators, and should normally also be permitted for the owner of the entry to be updated. For RemoveAuthName, the entry being updated is always the one to which the specified name currently maps, and should be an identity which is not the one being removed. Regardless, any given authentication name can map only to one ID; attempting to add (via AddAuthName) a second mapping for the same authentication name must fail.

The AuthNameToID operation is analogous to the existing NameToID operation, and like that, should be able to be used by anyone.



 TOC 

9.  Compatibility

An implementation of the AFS protection service protocol implementing these extensions shall indicate this by including in the response to a GetCapabilities PTS RPC the capability flag PTS_CAPABILITY_AUTHNAMEMAPPING.



 TOC 

10.  Authentication Name Types

While the authentication name is an opaque type with respect to the AFS-3 protocol, it is recommended that the following definitions be used for the proposed types described herein.



 TOC 

10.1.  Kerberos V4

The format of the Kerberos V4 name type is either name@REALM or name.inst@REALM, depending on whether a non-null instance is present. In both cases the trailing NUL character is *not* part of the authentication name data.



 TOC 

10.2.  Kerberos V5

The format of the Kerberos V5 name type is that described in section 2.1.3 of [RFC1964] (Linn, J., “The Kerberos Version 5 GSS-API Mechanism,” June 1996.). To this extent, the quoting character, '\', is not an allowable character in a principal.



 TOC 

10.3.  GSSAPI Export Names

The format of the GSSAPI name type is that described in section 3.2 of [RFC2743] (Linn, J., “Generic Security Service Application Program Interface Version 2, Update 1,” January 2000.). The data opaque object will contain the GSSAPI canonical name as generated by GSS_Export_name after GSS_Canonicalize_name. The display opaque object will contain the GSSAPI display name type and name string as generated by GSS_Display_name. The display name must only be used for printing; the canonical name must not be used for printing.



 TOC 

10.4.  Authentication Name Type Rewriting

When Kerberos 4 or 5 is used, with or without the GSSAPI, the corresponding Kerberos name type MUST be used. In particular, Kerberos 4 principal names MUST NOT be represented using the Kerberos 5 name type or vice versa, and Kerberos 5 principal names MUST NOT be represented using the GSSAPI export name type with the Kerberos mechanism OID. Servers accepting GSSAPI krb5 authentication and receiving an export name with the Kerberos mechanism OID MUST convert to the Kerberos 5 name type before calling AuthNameToID. This is intended to allow all users of Kerberos 5 as an authentication mechanism, regardless of bindings, to use the same authentication name.



 TOC 

11.  Security Considerations

Allowing AuthNameToID to be used by any caller exposes information about whether an authentication name is mapped at all, or, indeed, exists. In some environments, this information may be considered privileged.

Allowing a user to add arbitrary mappings to their identity via AddAuthName may allow unintended permissions to be granted if the user makes a mistake when mapping identities to the AFS identity in question.

Because a server is not required to know about all available name types, display names are provided by the caller to AddAuthName. It is possible to provide an erroneous display name whether for malicious or benign reasons; In either case, making a decision based on the display name may result in problems.



 TOC 

12.  IANA Considerations

This document doesn't require any IANA registrations.



 TOC 

13.  AFS-3 Registry Considerations

This document requires the registration of the new RPCs as provided in the section Section 7 (RPC Interface) above, as well as new registries for PTS capabilities and for name types, also as above.



 TOC 

14.  Acknowledgments

The author thanks Magnus Ahltorp, Love Hörnquist Åstrand, and Jeffrey T. Hutzelman for their work on the scope of this enhancement, and to the attendees of the 2009 AFS hackathon in Edinburgh, notably Marcus Watts and Simon Wilkinson, for their assistance in defining the name object for GSSAPI.



 TOC 

15.  References



 TOC 

15.1. Normative References

[RFC2119] Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels,” BCP 14, RFC 2119, March 1997 (TXT, HTML, XML).


 TOC 

15.2. Informational References

[RFC1510] Kohl, J. and B. Neuman, “The Kerberos Network Authentication Service (V5),” RFC 1510, September 1993 (TXT).
[RFC1964] Linn, J., “The Kerberos Version 5 GSS-API Mechanism,” RFC 1964, June 1996 (TXT).
[RFC2743] Linn, J., “Generic Security Service Application Program Interface Version 2, Update 1,” RFC 2743, January 2000 (TXT).


 TOC 

Author's Address

  Derrick J. Brashear
  OpenAFS Project
  2829 Larkins Way
  Pittsburgh, PA 15203
  USA
Email:  shadow@openafs.org