Delay-Tolerant Networking E. Birrane
Internet-Draft E. DiPietro
Intended status: Experimental D. Linko
Expires: January 3, 2019 Johns Hopkins Applied Physics Laboratory
July 2, 2018

Bundle Protocol Agent Application Data Model
draft-birrane-dtn-adm-bp-01

Abstract

This document describes the Application Data Model (ADM) for a Bundle Protocol Agent (BPA) in compliance with the template provided by [I-D.birrane-dtn-adm].

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on January 3, 2019.

Copyright Notice

Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

An Application Data Model (ADM) provides a guaranteed interface for the management of an application or protocol in accordance with the Asynchronous Management Architecture (AMA) defined in [I-D.birrane-dtn-ama]. The ADM described in this document complies with the ADM Template provided in [I-D.birrane-dtn-adm] as encoded using the JSON syntax.

Bundle Protocol Agents (BPAs) are software instances that implement functionality required by the Bundle Protocol ([I-D.ietf-dtn-bpbis]). The BPA ADM provides the set of information necessary to remotely manage such agents.

1.1. Technical Notes

1.2. Scope

This ADM specifies those components of the Asynchronous Management Model (AMM) common to the management of any instance of a BPA.

Any Manager software implementing this ADM MUST perform the responsibilities of an AMA Manager as outlined in [I-D.birrane-dtn-adm] as they relate to the objects included in this document.

Any Agent software implementing this ADM MUST perform the responsibilities of an AMA Agent as outlined in [I-D.birrane-dtn-adm] as they relate to the objects included in this document.

1.3. Requirements Language

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119.

2. Structure and Design of this ADM

The BP Agent ADM's structure is in accordance to [I-D.birrane-dtn-adm]. This ADM contains metadata, edd, report templates, and controls. Externally Defined Data (EDD) are values that are calculated external to the ADM system. Report Templates are ordered sets of data descriptions that show how values will be represented in a corresponding report. Controls are predefined and sometimes parameterized opcodes that can be run on an Agent. Controls are preconfigured in Agents and Managers as part of ADM support. There are no variables, table templates, macros, constants, or operators in this ADM at this time. The contents of this ADM are derived from the main functions and data that are needed to configure and manage bundle protocol operations on an ION node.

All ADMs have metadata that includes the name, namespace, and version of the ADM as well as the name of the organization that is issuing that particular ADM. This is important for identification purposes of the ADMs and to ensure version control. The main elements of BP that are discussed in this ADM are endpoints, the priority of bundles/bytes, and whether or not the bundles/bytes were transferred successfully.

3. Naming and Identification

This section outlines the namespaces used to uniquely identify ADM objects in this specification.

3.1. Namespace and Nicknames

In accordance with [I-D.birrane-dtn-adm], every ADM is assigned a moderated Namespace. In accordance with [I-D.birrane-dtn-amp], these namespaces may be enumerated for compactness. The namespace and ADM identification for these objects is defined as follows.

Namespace Information
Identifier Value
Namespace DTN/bp_agent
ADM Enumeration 2

Given the above ADM enumeration, in accordance with [I-D.birrane-dtn-amp], the following AMP nicknames are defined.

BP Agent ADM Nicknames
Nickname Collection
40 DTN/bp_agent/Const
41 DTN/bp_agent/Ctrl
42 DTN/bp_agent/Edd
43 DTN/bp_agent/Mac
44 DTN/bp_agent/Oper
45 DTN/bp_agent/Rptt
47 DTN/bp_agent/Tblt
49 DTN/bp_agent/Var
50 DTN/bp_agent/Mdat
51-69 DTN/bp_agent/Reserved

4. BP Agent ADM JSON Encoding

 {
  "Mdat":[
   {
     "name": "name",
     "type": "STR",
     "value": "bp",
     "description": "The human-readable name of the ADM."
   },
   {
     "name": "namespace",
     "type": "STR",
     "value": "DTN/bp_agent",
     "description": "The namespace of the ADM."
   },
   {
     "name": "version",
     "type": "STR",
     "value": "v0.1",
     "description": "The version of the ADM"
   },
   {
     "name": "organization",
     "type": "STR",
     "value": "JHUAPL",
     "description": "The name of the issuing organization of the ADM."
   }
  ],

  "Edd": [
   {
     "name": "bp_node_id",
     "type": "STR",
     "description": "The node administration endpoint"
   },
   {
     "name": "bp_node_version",
     "type": "STR",
     "description": "The latest version of the BP supported 
        by this node"
   },
   {
     "name": "available_storage",
     "type": "UVAST",
     "description": "Bytes available for bundle storage"
   },
   {
     "name": "last_reset_time",
     "type": "UVAST",
     "description": "The last time that BP counters were reset, either
        due to execution of a reset control or a restart of
        the node itself"
   },
   {
     "name": "num_registrations",
     "type": "UINT",
     "description": "number of registrations"
   },
   {
     "name": "num_pend_fwd",
     "type": "UINT",
     "description": "number of bundles pending forwarding"
   },
   {
     "name": "num_pend_dis",
     "type": "UINT",
     "description": "number of bundles awaiting dispatch"
   },
   {
     "name": "num_in_cust",
     "type": "UINT",
     "description": "number of bundles"
   },
   {
     "name": "num_pend_reassembly",
     "type": "UINT",
     "description": "number of bundles pending reassembly"
   },
   {
     "name": "bundles_by_priority",
     "type": "UINT",
     "parmspec": [{"type":"UINT","name":"mask"}],
     "description": "number of bundles for the given priority. Priority
        is given as a priority mask where Bulk=0x1, normal=0x2,
        express=0x4. Any bundles matching any of the masked priorities
        will be included in the returned count"
   },
   {
     "name": "bytes_by_priority",
     "type": "UINT",
     "parmspec": [{"type":"UINT","name":"mask"}],
     "description": "number of bytes of the given priority. Priority is 
        given as a priority mask where bulk=0x1, normal=0x2, 
        express=0x4. Any bundles matching any of the masked priorities
        will be included in the returned count."
   },
   {
     "name": "src_bundles_by_priority",
     "type": "UINT",
     "parmspec": [{"type":"UINT","name":"mask"}],
     "description":"number of bundles sourced by this node of the given
        priority. Priority is given as a priority mask where bulk=0x1,
        normal=0x2, express=0x4. Any bundles sourced by this node and
        matching any of the masked priorities will be included in the
        returned count."
   },
   {
     "name": "src_bytes_by_priority",
     "type": "UINT",
     "parmspec": [{"type":"UINT","name":"mask"}],
     "description": "number of bytes sourced by this node of the given 
        priority. Priority is given as a priority mask where bulk=0x1,
        normal=0x2, express=0x4. Any bundles sourced by this node and 
        matching any of the masked priorities will be included in the 
        returned count"
   },
   {
     "name": "num_fragmented_bundles",
     "type": "UINT",
     "description": "number of fragmented bundles"
   },
   {
     "name": "num_fragments_produced",
     "type": "UINT",
     "description": "number of bundles with fragmentary payloads 
        produced by this node"
   },
   {
     "name": "num_failed_by_reason",
     "type": "UINT",
     "parmspec": [{"type":"UINT","name":"mask"}],
     "description": "number of bundles failed for any of the given
        reasons. (noInfo=0x1, Expired=0x2, UniFwd=0x4, Cancelled=0x8,
        NoStorage=0x10, BadEID=0x20, NoRoute=0x40, NoContact=0x80,
        BadBlock=0x100)"
   },
   {
     "name": "num_bundles_deleted",
     "type": "UINT",
     "description": "number of bundles deleted by this node"
   },
   {
     "name": "failed_custody_bundles",
     "type": "UINT",
     "description": "number of bundle fails at this node"
   },
   {
     "name": "failed_custody_bytes",
     "type": "UINT",
     "description": "number bytes of fails at this node"
   },
   {
     "name": "failed_forward_bundles",
     "type": "UINT",
     "description": "number bundles not forwarded by this node"
   },
   {
     "name": "failed_forward_bytes",
     "type": "UINT",
     "description": "number of bytes not forwaded by this node"
   },
   {
     "name": "abandoned_bundles",
     "type": "UINT",
     "description": "number of bundles abandoned by this node"
   },
   {
     "name": "abandoned_bytes",
     "type": "UINT",
     "description": "number of bytes abandoned by this node"
   },
   {
     "name": "discarded_bundles",
     "type": "UINT",
     "description": "number of bundles discarded by this node"
   },
   {
     "name": "discarded_bytes",
     "type": "UINT",
     "description": "number of bytes discarded by this node"
   },
   {
     "name": "endpoint_names",
     "type": "STR",
     "description": "CSV list of endpoint names for this node"
   },
   {
     "name": "endpoint_active",
     "type": "UINT",
     "parmspec": [{"type":"STR","name":"endpoint_name"}],
     "description": "is the given endpoint active? (0=no)"
   },
   {
     "name": "endpoint_singleton",
     "type": "UINT",
     "parmspec": [{"type":"STR","name":"endpoint_name"}],
     "description": "is the given endpoint singleton? (0=no)"
   },
   {
     "name": "endpoint_policy",
     "type": "UINT",
     "parmspec": [{"type":"STR","name":"endpoint_name"}],
     "description": "Does the endpoint abandon on fail (0=no)"
   }
  ],

  "Rptt": [
   {
     "name": "full_report",
     "definition": [
        "DTN/bp_agent/Mdat.name",
        "DTN/bp_agent/Mdat.version",
        "DTN/bp_agent/Edd.bp_node_id",
        "DTN/bp_agent/Edd.bp_node_version",
        "DTN/bp_agent/Edd.available_storage",
        "DTN/bp_agent/Edd.last_reset_time",
        "DTN/bp_agent/Edd.num_registrations",
        "DTN/bp_agent/Edd.num_pend_fwd",
        "DTN/bp_agent/Edd.num_pend_dis",
        "DTN/bp_agent/Edd.num_in_cust",
        "DTN/bp_agent/Edd.num_pend_reassembly",
        "DTN/bp_agent/Edd.bundles_by_priority(0)",
        "DTN/bp_agent/Edd.bundles_by_priority(1)",
        "DTN/bp_agent/Edd.bundles_by_priority(2)",
        "DTN/bp_agent/Edd.bytes_by_priority(0)",
        "DTN/bp_agent/Edd.bytes_by_priority(1)",
        "DTN/bp_agent/Edd.bytes_by_priority(2)",
        "DTN/bp_agent/Edd.src_bundles_by_priority(0)",
        "DTN/bp_agent/Edd.src_bundles_by_priority(1)",
        "DTN/bp_agent/Edd.src_bundles_by_priority(2)",
        "DTN/bp_agent/Edd.src_bytes_by_priority(0)",
        "DTN/bp_agent/Edd.src_bytes_by_priority(1)",
        "DTN/bp_agent/Edd.src_bytes_by_priority(2)",
        "DTN/bp_agent/Edd.num_fragmented_bundles",
        "DTN/bp_agent/Edd.num_fragments_produced",
        "DTN/bp_agent/Edd.num_failed_by_reason(0)",
        "DTN/bp_agent/Edd.num_failed_by_reason(1)",
        "DTN/bp_agent/Edd.num_failed_by_reason(2)",
        "DTN/bp_agent/Edd.num_bundles_deleted",
        "DTN/bp_agent/Edd.failed_custody_bundles",
        "DTN/bp_agent/Edd.failed_custody_bytes",
        "DTN/bp_agent/Edd.failed_forward_bundles",
        "DTN/bp_agent/Edd.failed_forward_bytes",
        "DTN/bp_agent/Edd.abandoned_bundles",
        "DTN/bp_agent/Edd.discarded_bundles",
        "DTN/bp_agent/Edd.discarded_bytes",
        "DTN/bp_agent/Edd.endpoint_names"
     ],
     "description": "This is all known meta-data, EDD, and VAR values 
        known by the agent."
   },
   {
     "name": "endpoint_report",
     "parmspec": [{"type":"STR","name":"endpoint_id"}],
     "definition": [
          {
            "ns":"DTN/bp_agent",
            "nm":"edd.endpoint_active",
            "ap":[{"type":"PARMNAME","value":"endpoint_id"}]
          },
          {
            "ns":"DTN/bp_agent",
            "nm":"edd.endpoint_singleton",
            "ap":[{"type":"PARMNAME","value":"endpoint_id"}]
          },
          {
            "ns":"DTN/bp_agent",
            "nm":"edd.endpoint_policy",
            "ap":[{"type":"PARMNAME","value":"endpoint_id"}]
          }
     ],
     "description": "This is all known endpoint information"
   }
  ],

  "Ctrl": [
   {
     "name": "reset_all_counts",
     "description": "This control causes the Agent to reset all counts 
        associated with bundle or byte statistics and to set the last 
        reset time of the BP primitive data to the time when the 
        control was run"
   }
  ]
}
       

The following is the JSON encoding for the Bundle Protocol Agent ADM:

5. IANA Considerations

At this time, this protocol has no fields registered by IANA.

6. References

6.1. Informative References

[I-D.birrane-dtn-ama] Birrane, E., "Asynchronous Management Architecture", Internet-Draft draft-birrane-dtn-ama-07, June 2018.

6.2. Normative References

[I-D.birrane-dtn-adm] Birrane, E., DiPietro, E. and D. Linko, "AMA Application Data Model", Internet-Draft draft-birrane-dtn-adm-02, June 2018.
[I-D.birrane-dtn-amp] Birrane, E., "Asynchronous Management Protocol", Internet-Draft draft-birrane-dtn-amp-04, June 2018.
[I-D.ietf-dtn-bpbis] Burleigh, S., Fall, K. and E. Birrane, "Bundle Protocol Version 7", Internet-Draft draft-ietf-dtn-bpbis-11, May 2018.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997.

Authors' Addresses

Edward J. Birrane Johns Hopkins Applied Physics Laboratory EMail: Edward.Birrane@jhuapl.edu
Evana DiPietro Johns Hopkins Applied Physics Laboratory EMail: Evana.DiPietro@jhuapl.edu
David Linko Johns Hopkins Applied Physics Laboratory EMail: David.Linko@jhuapl.edu