Internet Engineering Task Force A. Bierman Internet-Draft Netconf Central Intended status: BCP January 23, 2009 Expires: July 27, 2009 Guidelines for Authors and Reviewers of YANG Data Model Documents draft-bierman-netmod-yang-usage-00 Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on July 27, 2009. Copyright Notice Copyright (c) 2009 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Bierman Expires July 27, 2009 [Page 1] Internet-Draft YANG Usage Guidelines January 2009 Abstract This memo provides guidelines for authors and reviewers of standards track specifications containing YANG data model modules. Applicable portions may be used as a basis for reviews of other YANG data model documents. Recommendations and procedures are defined, which are intended to increase interoperability and usability of NETCONF implementations which utilize YANG data model modules. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. Requirements Notation . . . . . . . . . . . . . . . . . . 5 2.2. NETCONF Terms . . . . . . . . . . . . . . . . . . . . . . 5 2.3. YANG Terms . . . . . . . . . . . . . . . . . . . . . . . . 5 2.4. Terms . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3. General Documentation Guidelines . . . . . . . . . . . . . . . 7 3.1. YANG Data Model Boilerplate Section . . . . . . . . . . . 7 3.2. Narrative Sections . . . . . . . . . . . . . . . . . . . . 7 3.3. Definitions Section . . . . . . . . . . . . . . . . . . . 8 3.4. Security Considerations Section . . . . . . . . . . . . . 8 3.5. IANA Considerations Section . . . . . . . . . . . . . . . 8 3.5.1. Documents that Create a New Name Space . . . . . . . . 8 3.5.2. Documents that Extend an Existing Name Space . . . . . 9 3.6. Reference Sections . . . . . . . . . . . . . . . . . . . . 9 3.7. Copyright Notices . . . . . . . . . . . . . . . . . . . . 9 3.8. Intellectual Property Section . . . . . . . . . . . . . . 9 4. YANG Usage Guidelines . . . . . . . . . . . . . . . . . . . . 10 4.1. Identifiers . . . . . . . . . . . . . . . . . . . . . . . 10 4.2. Defaults . . . . . . . . . . . . . . . . . . . . . . . . . 10 4.3. Conditional Statements . . . . . . . . . . . . . . . . . . 10 4.4. Header Contents . . . . . . . . . . . . . . . . . . . . . 11 4.5. Data Types . . . . . . . . . . . . . . . . . . . . . . . . 12 4.6. Object Definitions . . . . . . . . . . . . . . . . . . . . 13 4.7. RPC Definitions . . . . . . . . . . . . . . . . . . . . . 13 4.8. Notification Definitions . . . . . . . . . . . . . . . . . 14 5. YANG Module Registry . . . . . . . . . . . . . . . . . . . . . 15 5.1. YANG Registry Data Model . . . . . . . . . . . . . . . . . 16 5.2. Examples . . . . . . . . . . . . . . . . . . . . . . . . . 18 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 21 7. Security Considerations . . . . . . . . . . . . . . . . . . . 22 8. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 23 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 24 9.1. Normative References . . . . . . . . . . . . . . . . . . . 24 9.2. Informative References . . . . . . . . . . . . . . . . . . 24 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 25 Bierman Expires July 27, 2009 [Page 2] Internet-Draft YANG Usage Guidelines January 2009 1. Introduction The standardization of network configuration interfaces for use with the NETCONF [RFC4741] protocol requires a modular set of data models, which can be reused and extended over time. This document defines a set of usage guidelines for standards track documents containing YANG [I-D.ietf-netmod-yang] data models. It is similar to the MIB usage guidelines specification [RFC4181] in intent and structure. Many YANG constructs are defined as optional to use, such as the description clause. However, in order to maximize interoperability of NETCONF implementations utilizing YANG data models, it is desirable to define a set of usage guidelines which may require a higher level of compliance than the minimum level defined in the YANG specification. A new IANA registry is needed to support YANG. This registry will allow YANG module namespace and other definitions to be centrally located, minimizing name collisions, and providing an authoritative status of each YANG module. The YANG Module Registry will support YANG modules, as well as YANG submodules which utilize a 'virtual' module definition. A virtual module contains only the module header, submodule include statements, and meta statements. The Submodule Registration procedure [ed: IANA procedure TBD] is used to publish specifications containing YANG submodules which extend a virtual module. This procedure allows the main module revision statement and include statement to be updated, without requiring publication or a separate RFC to contain the main module. Refer to Section 5 for more details. Bierman Expires July 27, 2009 [Page 3] Internet-Draft YANG Usage Guidelines January 2009 The NETCONF stack can be conceptually partitioned into four layers. Layer Example +-------------+ +--------------------+ +-------------------+ (4) | Content | | Configuration data | | Notification data | +-------------+ +--------------------+ +-------------------+ | | | +-------------+ +-----------------+ +---------------+ (3) | Operations | | | | | +-------------+ +-----------------+ +---------------+ | | | +-------------+ +--------------------+ +----------------+ (2) | RPC | | , | | | +-------------+ +--------------------+ +----------------+ | | | +-------------+ +-----------------------------+ (1) | Transport | | BEEP, SSH, SSL, console | | Protocol | | | +-------------+ +-----------------------------+ Figure 1 This document defines usage guidelines related to the NETCONF operations layer (3), and NETCONF content layer (4). It also contains a definition for a registry for YANG Modules, which can be used to locate documents which contain standards-track modules or submodules. Bierman Expires July 27, 2009 [Page 4] Internet-Draft YANG Usage Guidelines January 2009 2. Terminology 2.1. Requirements Notation The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 2.2. NETCONF Terms The following terms are defined in [RFC4741] and are not redefined here: o agent o application o capabilities o manager o operation o RPC 2.3. YANG Terms The following terms are defined in [I-D.ietf-netmod-yang] and are not redefined here: o data node o module o submodule o namespace o version 2.4. Terms The following terms are used throughout this document: o YAM: Shorthand term for a YANG data model module or submodule, used for properties which apply to both modules and submodules. When describing properties which are specific to modules, the term 'YANG module', or simply 'module', is used instead. When Bierman Expires July 27, 2009 [Page 5] Internet-Draft YANG Usage Guidelines January 2009 describing properties which are specific to submodules, the term 'YANG submodule', or simply 'module' is used instead. o Published Document: A stable release of a YAM, usually contained in an RFC. o Unpublished Document: An unstable release of a YAM, usually contained in an Internet Draft. o Virtual Module: A YANG module which does not contain any body statements, and is maintained in a registry. The body statements are defined in submodules, in one or more documents, and 'included' in the main module via a registry entry for the main module. Bierman Expires July 27, 2009 [Page 6] Internet-Draft YANG Usage Guidelines January 2009 3. General Documentation Guidelines YANG data model modules (YAMs) under review are likely to be contained in Internet Drafts. All guidelines for Internet Draft authors MUST be followed. These guidelines are available online at: http://www.isi.edu/in-notes/rfc-editor/instructions2authors.txt The following sections MUST be present in an Internet Draft containing a YAM: o YANG data model boilerplate section o Narrative sections o Definitions section o Security Considerations section o IANA Considerations section o References section 3.1. YANG Data Model Boilerplate Section This section MUST contain a verbatim copy of the latest approved Internet-Standard Management Framework boilerplate, which is available on-line at [ed: URL TBD]. 3.2. Narrative Sections The narrative part MUST include an overview section that describes the scope and field of application of the YAM(s) defined by the specification and that specifies the relationship (if any) of these YAMs to other standards, particularly to standards containing other YAM modules. The narrative part SHOULD include one or more sections to briefly describe the structure of the YAMs defined in the specification. If the YAM(s) defined by the specification import definitions from other YAMs (except for those defined in the YANG [I-D.ietf-netmod-yang] or YANG Types [I-D.ietf-netmod-yang-types] documents) or are always implemented in conjunction with other YAMs, then those facts MUST be noted in the overview section, as MUST any special interpretations of objects in other YAMs. Bierman Expires July 27, 2009 [Page 7] Internet-Draft YANG Usage Guidelines January 2009 3.3. Definitions Section This section contains the YAM(s) defined by the specification. These modules MUST be written in YANG [I-D.ietf-netmod-yang]. See Section 4 for guidelines on YANG usage. 3.4. Security Considerations Section Each specification that defines one or more YAMs MUST contain a section that discusses security considerations relevant to those modules. This section MUST be patterned after the latest approved template (available at [ed: URL TBD]). In particular, writable YAM objects that could be especially disruptive if abused MUST be explicitly listed by name and the associated security risks MUST be spelled out; similarly, readable YAM objects that contain especially sensitive information or that raise significant privacy concerns MUST be explicitly listed by name and the reasons for the sensitivity/privacy concerns MUST be explained. 3.5. IANA Considerations Section In order to comply with IESG policy as set forth in http://www.ietf.org/ID-Checklist.html, every Internet-Draft that is submitted to the IESG for publication MUST contain an IANA Considerations section. The requirements for this section vary depending what actions are required of the IANA. Refer to [TBD] for details on the structure of the YANG registries maintained by the IANA. 3.5.1. Documents that Create a New Name Space If an Internet-Draft defines a new name space that is to be administered by the IANA, then the document MUST include an IANA Considerations section, specifies how the name space is to be administered. Specifically, if any YANG module namespace statement value contained in the document is not already registered with IANA, then a new YANG Namespace registry entry must be requested from the IANA [ed: procedure TBD]. Bierman Expires July 27, 2009 [Page 8] Internet-Draft YANG Usage Guidelines January 2009 3.5.2. Documents that Extend an Existing Name Space If an Internet-Draft defines any extensions to a YANG Namespace already administered by the IANA, then the document MUST include an IANA Considerations section, specifies how the name space extension is to be administered. Specifically, if any YANG submodule belongs-to value contained in the document is associated with a module that contains a namespace statement value equal to a YANG Namespace already administered by the IANA, then a new YANG Module registry entry and YANG Namespace Update Procedure must be requested from the IANA [ed: procedure TBD]. 3.6. Reference Sections [ed: 2223bis text TBD] For every import or include statement which appears in a YAM contained in the specification, which identifies a YAM in a separate document, a corresponding normative reference to that document MUST appear in the Normative References section. The reference MUST correspond to the specific YAM version actually used within the specification. If any YANG submodule contained in the specification contains a 'belongs-to' statement value which identifies a 'virtual' YANG module maintained in the IANA YANG Module Registry, then a corresponding normative reference to the registry identifier MUST appear in the Normative References section. The registry entry MUST be properly updated, using the appropriate procedures [ed: IANA procedures TBD]. 3.7. Copyright Notices The proper copyright notices MUST be present in the module description statement. [ed.: See RFC 4181, 3.7. Exact text for insertion is TBD.] 3.8. Intellectual Property Section The proper IPR statements MUST be present in the document, according to the most current Internet Draft boilerplate. [ed.: actual IETF IPR text reference TBD] Bierman Expires July 27, 2009 [Page 9] Internet-Draft YANG Usage Guidelines January 2009 4. YANG Usage Guidelines In general, YAMs in IETF standards-track specifications MUST comply with all syntactic and semantic requirements of YANG. [I-D.ietf-netmod-yang]. The guidelines in this section are intended to supplement the YANG specification, which is intended to define a minimum set of conformance requirements. In order to promote interoperability and establish a set of practices based on previous experience, the following sections establish usage guidelines for specific YANG constructs. Only guidelines which clarify or restrict the minimum conformance requirements are included here. 4.1. Identifiers Identifiers for modules, submodules, typedefs, groupings, data objects, rpcs, and notifications MUST be between 1 and 63 characters in length. 4.2. Defaults In general, it is suggested that sub-statements containing default values SHOULD NOT be present. For example, 'status current;', 'config true;', 'mandatory false;', and 'max-elements unbounded;' are common defaults which would make the YAM difficult to read if used everywhere they are allowed. Instead, it is suggested that common statements SHOULD only be used when being set to a value other than the default value. 4.3. Conditional Statements A YAM may be conceptually partitioned in several ways, using the 'if- feature' and/or 'when' statements. In addition, NETCONF capabilities are designed to identify optional functionality. Data model designers need to carefully consider all modularity aspects, including the use of YANG conditional statements. Objects SHOULD NOT directly reference NETCONF capabilities, in order to specify optional behavior. Instead, a 'feature' statement SHOULD be defined to represent the NETCONF capability, and the 'if-feature' statement SHOULD be used within the object definition. If the condition associated with the desired semantics is not dependent on any particular instance value within the database, then Bierman Expires July 27, 2009 [Page 10] Internet-Draft YANG Usage Guidelines January 2009 an 'if-feature' statement SHOULD be used instead of a 'when' statement. All 'must' and 'when' statements MUST contain valid XPath. If any name tests are present, they MUST contain valid module prefixes and/or data node names. The 'attribute', 'namespace', 'preceding', 'preceding-sibling', 'following', and 'following-sibling' axis SHOULD NOT be used. The 'position' and 'last' functions SHOULD NOT be used. Implicit 'position' function calls within predicates SHOULD NOT be used. (e.g., //chapter[42]). Data nodes which use the 'int64' and 'uint64' built-in type SHOULD NOT be used within relational expressions. Data modelers need to be careful not to confuse the YANG value space and the XPath value space. The data types are not the same in both, and conversion between YANG and XPath data types SHOULD be considered carefully. Explicit XPath data type conversions SHOULD be used (e.g., 'string', 'boolean', or 'number' functions), instead of implicit XPath data type conversions. 4.4. Header Contents o The namespace MUST be a globally unique URI, usually assigned by the IANA. o Until a URI is assigned by the IANA, a temporary namespace string SHOULD be selected which is not likely to collide with other YANG namespaces, such as the filename of the Internet Draft containing the YAM. o The organization statement MUST be present. o The contact statement MUST be present. o The description statement MUST be present. o If the YAM represents a model defined in one or more external documents, then a reference statement SHOULD be present. o A revision statement MUST be present for each published version of the YAM. Bierman Expires July 27, 2009 [Page 11] Internet-Draft YANG Usage Guidelines January 2009 o Each new revision MUST include a revision date which is higher than any other revision date in the YAM. o It is acceptable to reuse the same revision statement within unpublished versions (i.e., Internet Drafts), but the revision date MUST be updated to a higher value each time the Internet Draft is re-published. 4.5. Data Types o Selection of an appropriate data type (i.e., built-in type, existing derived type, or new derived type) is very subjective and therefore few requirements can be specified on that subject. o Data model designers SHOULD use the most appropriate built-in data type for the particular application. o If extensibility of enumerated values is required, then the identityref data type SHOULD be used instead of an enumeration or other built-in type. o If an appropriate derived type exists in any standard YAM, such as [I-D.ietf-netmod-yang-types], then it SHOULD be used instead of defining a new derived type. o The description statement MUST be present. o If the type semantics are defined in an external document, then a reference statement SHOULD be present. o For string data types, if a machine-readable pattern can be defined for the desired semantics, then one or more pattern statements SHOULD be present. o For string data types, if the length of the string is not unbounded in all implementations, then a length statement SHOULD be present. o For numeric data types, if the values allowed by the intended semantics are different than those allowed by the unbounded intrinsic data type (e.g., int32), then a range statement SHOULD be present. o The signed numeric data types (i.e., 'int8', 'int16', 'int32', and 'int64') SHOULD NOT be used unless negative values are allowed for the desired semantics. Bierman Expires July 27, 2009 [Page 12] Internet-Draft YANG Usage Guidelines January 2009 o The 'float32' and 'float64' data types SHOULD only be used if the other numeric data types do not fully represent the desired semantics. o For enumeration or bits data types, the semantics for each enum or bit SHOULD be documented. A separate description statement (within each enum or bit statement) SHOULD be used, instead of the description statement for the type itself. o If an appropriate units identifier can be associated with the desired semantics, then a units statement SHOULD be present. o If an appropriate default value can be associated with the desired semantics, then a default statement SHOULD be present. o If a significant number of derived types are defined, and it is anticipated that these data types will be reused by multiple YAMs, then these derived types SHOULD be contained in a separate module or submodule, to allow easier reuse without unnecessary coupling. 4.6. Object Definitions o The description statement MUST be present. o If the object semantics are defined in an external document, then a reference statement SHOULD be present. o The 'anyxml' construct MUST NOT be used within configuration data. o If there are referential integrity constraints associated with the desired semantics that can be represented with XPath, then one or more must statements SHOULD be present. o For list and leaf-list objects, if the number of possible instances for all implementations is not unbounded, then the min- elements and/or max-elements statements SHOULD be present. 4.7. RPC Definitions o The description statement MUST be present. o If the RPC method semantics are defined in an external document, then a reference statement SHOULD be present. o If the RPC method impacts system behavior in some way, it SHOULD be mentioned in the description statement. Bierman Expires July 27, 2009 [Page 13] Internet-Draft YANG Usage Guidelines January 2009 o If the RPC method is potentially harmful to system behavior in some way, it MUST be mentioned in the Security Considerations section of the document. 4.8. Notification Definitions o The description statement MUST be present. o If the notification semantics are defined in an external document, then a reference statement SHOULD be present. Bierman Expires July 27, 2009 [Page 14] Internet-Draft YANG Usage Guidelines January 2009 5. YANG Module Registry This section contains a YANG module registry specification, which can be used to document each release of a module. It can also be used to maintain virtual modules, in which all the body statements are contained in submodules specified in the registry, not in a YANG module within a published RFC or Internet Draft. In order for YANG submodules to be used effectively within standards track documents, it is desirable to avoid re-publishing an RFC containing the 'main' module, each time a submodule is added or changed. The use of submodules can effectively reduce the number of XML namespaces used within NETCONF PDUs, but their primary use is to allow flexible partitioning of a single XML namespace into multiple, independent documents, which can be easily extended over time. The YANG Module Registry is an XML instance document which contains minimal information about the modules represented in the registry. Each registry has a unique ID, called the 'registry-id'. There are also zero or more 'module' entries. Each 'module' entry contains the module name, XML namespace, and optional 'url' field to identify its location. If this is a virtual module, then the 'virtual' field will be present. Within each module entry, there are one or more 'release' entries. Each 'release' entry contains the publication date of the release. It also contains zero or more 'submodule' entries. For each submodule included by the main module represented by each 'module' entry, a 'submodule' entry SHOULD be present. Each entry provides the name, release date and an optional 'url' if the submodule is available online. It is expected that the IANA will maintain the official YANG Module Registry for YAMs contained in published standards-track documents. It is also expected that procedures for adding a new YANG module, and adding a new release of an existing module, will also be specified. [ed: A YANG data model and example XML instance document are provided below to demonstrate how such a registry might work. This work is very preliminary and subject to change.] Bierman Expires July 27, 2009 [Page 15] Internet-Draft YANG Usage Guidelines January 2009 5.1. YANG Registry Data Model This section contains a YANG module definition which represents the information stored in the IANA YANG Module Registry. It is provided for informational purposes only. The actual definition is [TBD]. module yang-registry { namespace "yang-registry-TBD"; prefix "yr"; // for the uri data type import yang-types { prefix "yang"; } organization "IETF"; contact "Send comments to ."; description "YANG Module Registry Data Structure"; revision "2009-01-22" { description "Initial version."; } container registry { leaf registry-id { description "Contains the identity of this registry."; type yang:uri; mandatory true; } list module { key "name"; unique "namespace"; leaf name { description "YANG module name."; // TBD: imported name string type Bierman Expires July 27, 2009 [Page 16] Internet-Draft YANG Usage Guidelines January 2009 type string { length "1..63"; } } leaf namespace { description "YANG module namespace."; type yang:uri; mandatory true; } leaf url { description "URL for this YANG module, if one is available."; type yang:uri; } leaf virtual { description "If present, then this registry entry represents a virtual YANG module, which is a YANG module which does not contain any body statements. Instead, submodules are used to contain all body statements. Each release entry within this entry is expected to contain all the submodule content information for this virtual module."; type empty; } list release { description "Describes the contents of a specific release of a YANG module. At least one entry MUST exist for the most current version of the module."; min-elements 1; key version; leaf version { description "YANG module release date."; // TBD: imported date string type // YYYY-MM-DD type string { length "10"; } Bierman Expires July 27, 2009 [Page 17] Internet-Draft YANG Usage Guidelines January 2009 } list submodule { key "name"; leaf name { description "YANG submodule name."; // TBD: imported name string type type string { length "1..63"; } } leaf version { description "YANG module revision date."; // TBD: imported date string type // YYYY-MM-DD type string { length "10"; } mandatory true; } leaf url { description "URL for this YANG submodule, if one is available."; type yang:uri; } } // list submodule } // list release } // list module } // container registry } // module yang-registry Figure 2 5.2. Examples This section contains some example registry entries, demonstrating the basic use cases. http://example.com/yang-registry Bierman Expires July 27, 2009 [Page 18] Internet-Draft YANG Usage Guidelines January 2009 notification urn:ietf:params:xml:ns:netconf:notification:1.0 ftp://ftp.rfc-editor.org/in-notes/rfc5277.txt 2008-07-01 notification-content urn:ietf:params:xml:ns:netmod:notification ftp://ftp.rfc-editor.org/in-notes/rfc5277.txt 2008-07-01 services http://example.com/yang/services http://example.com/yang/monitor-tools.yang 2009-01-23 common-types 2008-11-14 http://example.com/yang/common-types.yang ping 2008-11-14 http://example.com/yang/ping.yang Bierman Expires July 27, 2009 [Page 19] Internet-Draft YANG Usage Guidelines January 2009 traceroute 2009-01-23 http://example.com/yang/traceroute.yang 2008-11-14 common-types 2008-11-14 http://example.com/yang/common-types.yang ping 2008-11-14 http://example.com/yang/ping.yang Figure 3 Bierman Expires July 27, 2009 [Page 20] Internet-Draft YANG Usage Guidelines January 2009 6. IANA Considerations There are no actions requested of IANA at this time. [ed.: If the YANG Registry approach is pursued, then details for those procedures will need to be defined.] Bierman Expires July 27, 2009 [Page 21] Internet-Draft YANG Usage Guidelines January 2009 7. Security Considerations This document defines documentation guidelines for NETCONF content defined with the YANG data modeling language. It does not introduce any new or increased security risks into the management system. [ed: RFC 4181 style security section TBD] Bierman Expires July 27, 2009 [Page 22] Internet-Draft YANG Usage Guidelines January 2009 8. Acknowledgments The structure and contents of this document are adapted from Guidelines for MIB Documents [RFC4181], by C. M. Heard. Bierman Expires July 27, 2009 [Page 23] Internet-Draft YANG Usage Guidelines January 2009 9. References 9.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC4741] Enns, R., "NETCONF Configuration Protocol", RFC 4741, December 2006. [I-D.ietf-netmod-yang] Bjorklund, M., "YANG - A data modeling language for NETCONF", draft-ietf-netmod-yang-03 (work in progress), January 2009. [I-D.ietf-netmod-yang-types] Schoenwaelder, J., "Common YANG Data Types", draft-ietf-netmod-yang-types-01 (work in progress), November 2008. 9.2. Informative References [RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB Documents", BCP 111, RFC 4181, September 2005. Bierman Expires July 27, 2009 [Page 24] Internet-Draft YANG Usage Guidelines January 2009 Author's Address Andy Bierman Netconf Central Simi Valley, CA USA Email: andy@netconfcentral.com Bierman Expires July 27, 2009 [Page 25]