Network Working Group Brian Bidulock INTERNET-DRAFT OpenSS7 Corporation Intended status: PROPOSED STANDARD February 3, 2007 Expires in August 2007 SS7 TCAP-User Adaptation Layer (TUA) Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress". The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire in August 2007. Copyright Copyright (C) The IETF Trust (2007). Abstract This document defines a protocol for the transport of any SS7 TCAP- User signalling (e.g, INAP, MAP, etc.) over IP using the Stream Control Transport Protocol [SCTP]. The protocol should be modular and symmetric, to allow it to work in diverse architectures, such as a Signalling Gateway and IP Signalling End-point architecture. Protocol elements are added to allow seamless operation between peers in the SS7 and IP domains. B. Bidulock Version 0.5 Page 1 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Contents A complete table of contents, list of illustrations and tables, and change history for this document, appears at the end of the document. 1. Introduction There is on-going integration of SCN and IP networks. Network service providers are designing IP-based signalling architectures that need support for SS7 and SS7-like signalling protocols. IP provides an effective way to transport user data and for operators to expand their networks and build new services. In these networks, there is a need for interworking between the SS7 and IP domains [RFC2719]. This draft defines a protocol for the transport of SS7 TCAP User protocols [Q.771], [T1.114], such as MAP and INAP, over IP using the Stream Control Transmission Protocol (SCTP) [SCTP]. 1.1. Scope This document details the delivery of TC-user messages (MAP, CAP, INAP, etc.) over IP between two signalling end-points. Consideration is given for the transport from an SS7 Signalling Gateway (SG) to an IP signalling node (such as an IP-resident Database) as described in the Framework Architecture for Signalling Transport [RFC2719] This protocol can also support transport of TC-user messages between two end-points wholly contained within and IP network. The delivery mechanism addresses the following criteria: + Support for transfer of TCAP messages + Support for TCAP operation class 1, 2, 3 and 4 operation. + Support for the operation of TC-User protocol peers. + Support for the management of SCTP transport associations between signalling gateways and IP-based signalling nodes. + Support for distributed IP-based signalling nodes. + Support for the asynchronous reporting of status changes to management functions. 1.2. Terminology and Abbreviations 1.2.1. Abbreviations CAP -- CAMEL Application Protocol. CTP -- Common Transport Protocol. DNS -- Directory Name Service. GTT -- Global Title Translation. HLR -- Home Location Register. ID -- Identifier. IMSI -- International Mobile Station Identifier. INAP -- Intelligent Network Application Part. B. Bidulock Version 0.5 Page 2 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 IPSP -- IP Signalling Point. MAP -- Mobile Application Protocol. MIB -- Management Information Base. MSC -- Mobile Switching Center. PC -- SS7 Point Code. SCCP -- Signalling Connection Control Part. SCN -- Switched Circuit Network. SCTP -- Stream Control Transmission Protocol. SCP -- Signalling Control Point. SLP -- Service Logic Program. SS7 -- Signalling System No. 7. SSP -- Service Switching Point. SUA -- SS7 SCCP-User Adpatation Layer. TCAP -- Transaction Capabilities Application Part. TC -- TCAP Component Sub-Layer. TMF -- Transaction Mapping Function. TR -- TCAP Transaction Sub-layer. TUA -- SS7 TCAP-User Adaptation Layer. VLR -- Visitor Location Register. 1.2.2. Terminology Application Server (AS) - a logical entity serving a specific Routing Key. An example of an Application Server is a virtual database element handling all HLR or SCP transactions for a particular SS7 Signalling Point. The AS contains a set of one or more unique Application Server Processes, of which one or more is normally actively processing traffic. There is a one-to-one relationship between an Application Server and a Routing Key. Application Server Process (ASP) - a process instance of an Application Server. An Application Server Process serves as an active, backup, load-share or broadcast process of an Application Server (e.g, part of a distributed signalling node or database element). Examples of ASPs are MGCs, IP SCPs, or IP HLRs. An ASP contains an SCTP end-point and may be configured to process traffic within more that one Application Server. Association - refers to an SCTP association [SCTP]. The association provides the transport for the delivery of TCAP protocol data units and TUA layer peer messages. Component Sub-layer (TC) The Component Sub-layer of TCAP [Q.771]. Fail-over - the capability to reroute signalling traffic as required to an alternate Application Server Process, or group of ASPs, within an Application Server in the event of failure or unavailability of a currently used Application Server Process. Fail-over may apply upon the return to service of a previously unavailable Application Server Process. B. Bidulock Version 0.5 Page 3 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Host - the computing platform that the process (SGP, ASP or IPSP) is running on. IP Server Process (IPSP) - a process instance of an IP-based application. An IPSP is essentially the same as an ASP, except that it uses TUA in a point-to-point fashion. Layer Management (LM) - a nodal function that handles the inputs and outputs between the TUA layer and a local management entity. Message Transfer Part (MTP) The Message Transfer Part [Q.701], [T1.111] of the SS7 protocol. Nodal Interworking Function (NIF) - an implementation dependent interworking function present at a Signalling Gateway that interworks primitives and procedures between the TCAP and TUA layers in the SG. Network Appearance (NA) - a value that identifies the SS7 network context of a Routing Key. The Network Appearance value is of significance only within an administrative domain; it is coordinated between the SG and ASP. Network Byte Order - the ordering of bytes most-significant-byte first, also referred to as Big Endian. Routing Context (RC) - a value that uniquely identifies a Routing Key and an Application Server. Routing Context values are either configured using a configuration management interface, or by using the Routing Key Management (RKM) messages and procedures defined for TUA. Routing Key (RK) - describes a set of SS7 parameters and parameter values that uniquely define the range of signalling traffic to be handled by a particular Application Server. Signalling Connection Control Part (SCCP) - The Signalling Connection Control Part [Q.711] of the SS7 protocol. Signalling Gateway (SG) - a signalling agent that exchanges SCN native signalling at the edge of the IP network [RFC2719]. An SG appears to the SS7 network as an SS7 Signalling Point. An SG contains a set of one or more Signalling Gateway Processes, of which one or more is normally actively processing traffic. When an SG contains more than one SGP, the SG is a logical entity and the contained SGPs are assumed to be coordinated into a single management view both toward the SS7 network and toward the supported Application Servers. Signalling Gateway Process (SGP) - a process instance of a Signalling Gateway. It serves as an active, backup, load-sharing or broadcast process of a Signalling Gateway. B. Bidulock Version 0.5 Page 4 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Stream - an SCTP stream; a unidirectional logical channel established from one SCTP endpoint to another associated SCTP endpoint, within which all user messages are delivered in sequence, except for those submitted to the unordered delivery service. Transaction Capabilities Application Part (TCAP) - The Transaction Capabilities Application Part [Q.771], [T1.114] of the SS7 protocol. Transaction Mapping Function (TMF) - an implementation dependent function that is responsible for resolving the address and application context presented in the incoming TUA message to the correct SCTP association and Routing Context for the desired application. The TMF MAY use routing context or routing key information as selection criteria for the appropriate SCTP association. Transaction Sublayer (TR) - The Transaction Sublayer of TCAP [Q.771]. Transport Address - an address that serves as a source or destination for the unreliable packet transport service used by SCTP. In IP networks, a transport address is defined by the combination of IP address and an SCTP port number <1>. 1.3. TUA Overview 1.3.1. Signalling Transport Architecture The framework architecture that has been defined for SCN signalling transport over IP [RFC2719] uses multiple components, including an IP transport protocol, a signalling common transport protocol and an adaptation module to support the services expected by a particular SCN signalling protocol from its underlying protocol layer. In general terms, the TUA architecture can be modeled as a peer-to- peer architecture. The first section considers the SS7-to-IP interworking architectures for TCAP class 1, 2, 3, and 4 operations. For this case, it is assumed that the ASP initiates the establishment of the SCTP association with the SG. 1.3.2. Protocol Architecture for Classes 1, 2, 3 and 4 In this architecture (illustrated in Figure 1), the TCAP and TUA layers interface in the SG. A Nodal Interworking Function (NIF) provides for interworking between the TCAP and TUA layers and provides for the transfer of the user messages as well as management messages. B. Bidulock Version 0.5 Page 5 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 ......... ............... ......... : : : : : : : SEP : SS7 : : IP : : : or :.........: SG :........: ASP : : STP : : : : : :.......: :.............: :.......: _______ _____________ _______ | | | | | | | TC-U | | NIF | | TC_U | |-------| |------ ------| |-------| | TCAP | | TCAP | | | | |-------| |------| TUA | | TUA | | SCCP | | SCCP | | | | |-------| |------|------| |-------| | MTP3 | | MTP3 | | | | |-------| |------| SCTP | | SCTP | | MTP2 | | MTP2 | | | | |-------| |------|------| |-------| | L1 | | L1 | IP | | IP | |_______| |______|______| |_______| | | | | |________________| |_______________| TC-U - TCAP-User (e.g. - MAP/INAP) STP - SS7 Signaling Transfer Point NIF - Nodal Interworking Function Figure 1. Protocol Architecture 1.3.3. All IP Architecture This architecture, illustrated in Figure 2, can be used to carry a protocol which uses the transport services of TCAP, but is contained within an IP network. This allows extra flexibility in developing networks, especially when interaction between legacy signalling is not needed. The architecture removes the need for a signalling gateway function. B. Bidulock Version 0.5 Page 6 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 ........ ........ : : IP : : : AS :........: AS : : : : : :......: :......: ______ ______ | | | | | AP | | AP | |------| |------| | TUA | | TUA | |------| |------| | SCTP | | SCTP | |------| |------| | IP | | IP | |______| |______| | | |________________| AP - Application Protocol (e.g. - MAP/INAP) Figure 2. All IP Architecture 1.3.4. ASP Fail-over Model and Terminology The TUA protocol supports ASP fail-over functions to support a high availability of transaction processing capability. An Application Server can be considered as a list of all ASPs configured or registered to handled TC-user messages within a certain range of routing information, or within a certain set of transaction dialogues, known as a `Routing Key.' One or more ASPs in the list may normally be active to handle traffic, while others may be inactive but available in the event of failure or unavailability of the active ASPs. For operational considerations, see Appendix A. 1.3.5. Services Provided by the TUA Layer 1.3.5.1. Support for the transport of TCAP-User Messages The TUA supports the transfer of TC-user messages. The TUA layer at the SG and the ASP support the seamless transport of user messages between the SG and the ASP. 1.3.5.1.1. TCAP Operation Class Support Depending on the TC-users supported, the TUA supports the 4 possible TCAP operation classes transparently. The TCAP operation classes are defined as follows: B. Bidulock Version 0.5 Page 7 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Operation Class 1 - provides for transactions reporting both success and failure. Operation Class 2 - provides for transactions reporting failure. Operation Class 3 - provides for transactions reporting success. Operation Class 4 - provides for transactions reporting neither success nor failure. 1.3.5.2. Native Management Functions The TUA layer provides the capability to indicate errors associated with the TUA-protocol messages and to provide notification to local management and the remote peer as necessary. 1.3.5.3. Interworking with TCAP Management Functions The TUA layer provides interworking with TCAP management functions at the SG for seamless inter-operation between the SCN network and the IP network. TUA provides the following management functions: (1) Provides an indication to the TC-user at an ASP that an SS7 subsystem, SCCP User Part or MTP Destination is unavailable. (2) Provides an indication to the TC-user at an ASP that an SS7 subsystem, SCCP User Part or MTP Destination is available. (3) Provides an indication to the TC-user at an ASP that an SS7 subsystem or MTP Destination is congested (flow controlled). (4) Provides the initiation of an audit of SS7 subsystems or MTP Destinations status at the SG. B. Bidulock Version 0.5 Page 8 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Table 1. Mapping of Management Primitives +------------------------+---------------------------+------------+ | Name | Reference | TUA | +-----------+------------+-------------+-------------+ Management | | Generic | Specific | ITU-T Q.711 | ANSI T1.112 | Message | +-----------+------------+-------------+-------------+------------+ | N-STATE | Request | 6.3.2.3.2 | 2.3.2.3.2 | DUNA | | | Indication | | | DAVA | | | | | | SCON | +-----------+------------+-------------+-------------+------------+ | N-PCSTATE | Indication | 6.3.2.3.3 | 2.3.2.3.4 | DUNA | | | | | | DAVA | | | | | | SCON | | | | | | DUPU | +-----------+------------+-------------+-------------+------------+ | N-COORD | Request | 6.3.2.3.1 | 2.3.2.3.3 | DRST | | | Indication | | | | | | Response | | | | | | Confirm | | | | +-----------+------------+-------------+-------------+------------+ The interworking with TCAP management messages consists of DUNA, DAVA, DAUD, DRST, DUPU or SCON messages (defined in Section 3) on receipt of management events (defined by TCAP) to the appropriate ASPs. The primitives in Table 1 are sent between the TCAP and TUA management functions in the SG to trigger events in the IP and SS7 domain. The TUA layer provides transparent passing of SCCP availability, unavailability and congestion status indication primitives (N-STATE, N-PCSTATE and N-COORD) as provided for in ITU-T Q.771 2.2.3 [Q.771]. 1.3.5.4. Support for the Management of SCTP Associations The TUA layer at the SGP maintains the availability state of all configured remote ASPs, to manage the SCTP Associations and the traffic between TUA peers. As well, the active/inactive and congestion state of remote ASPs is maintained. The TUA layer MAY be instructed by local management to establish an SCTP association to a peer TUA node. This can be achieved using the M-SCTP_ESTABLISH primitives to request, indicate and confirm the establishment of an SCTP association with a peer TUA node. To avoid redundant SCTP associations between two TUA peers, one side (client) SHOULD be designated to establish the SCTP association, or TUA configuration information maintained to detect redundant associations (e.g, via knowledge of the expected local and remote SCTP endpoint addresses). Local management MAY request from the TUA layer the status of the underlying SCTP associations using the M-SCTP_STATUS request and B. Bidulock Version 0.5 Page 9 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 confirm primitives. Also, the TUA MAY autonomously inform local management of the reason for the release of an SCTP association, determined either locally within the TUA layer or by a primitive from the SCTP. Also, the TUA layer MAY inform the local management of the change in status of an ASP or AS. This MAY be achieved using the M-ASP_STATUS request or M-AS_STATUS request primitives. 1.4. Functional Areas 1.4.1. Dialogue Identifiers, Routing Contexts and Routing Keys The mapping of TCAP messages into dialogues between the SGP and the Application Servers is determined by Dialogue Identifiers, Routing Keys and their associated Routing Contexts. A Routing Key is essentially a set of TCAP parameters used to direct TCAP messages; whereas, the Routing Context parameter is a 4-byte value (unsigned integer) that is associated to that Routing Key in a one-to-one relationship. The Routing Context therefore can be viewed as an index into a sending node's Transaction Mapping Function tables containing the Routing Key entries. Possible TCAP address/routing information that comprise a Routing Key entry includes, for example, a local and remote Point Code, Subsystem Number, Global Title Address, Application Context, local and remote Transaction Id pairs, or TC-User specific information such as User Information, IMSI, SLP. The particular information used to define a TUA Routing Key is application and network dependent, and none of the above examples are requirements for TUA. An Application Server Process (ASP) may be configured to process signalling traffic related to more than one Application Server (AS), over a single SCTP Association. ASP Active (ASPAC) and ASP Inactive (ASPIA) management messages (see Section 3) use the Routing Context to discriminate signalling traffic to be started or stopped. At an ASP, the Routing Context parameter uniquely identifies the range of signalling traffic associated with each Application Server that the ASP is configured to receive. 1.4.2. Routing Key Limitations Routing Keys SHOULD be unique in the sense that each received TCAP message SHOULD have a full or partial match to a single routing result. It is not necessary for the parameter range values within a particular Routing Key to be continuous. For example, an AS could be configured to support transaction processing for multiple ranges of subscribers that are not represented by contiguous Global Title Addresses. B. Bidulock Version 0.5 Page 10 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 1.4.3. Managing Routing Context and Routing Keys There are two ways to provision a Routing Key at an SGP. A Routing Key may be configured statically using an implementation dependent management interface, or dynamically managed using the the TUA Routing Key registration procedures. When using a management interface to configure Routing Keys, the Transaction Mapping Function within the SGP is not limited to the set of parameters defined in this document. Other implementation dependent distribution algorithms may be used. 1.4.4. Transaction Mapping Function To perform its addressing and relaying capabilities, the TUA makes use of an Transaction Mapping Function (TMF). This function is considered part of TUA, but the way it is realized is left implementation or deployment dependent (local tables, SCCP GTT database, DNS, LDAP, etc.) The TMF is invoked when a message is received at the incoming interface. The TMF is responsible for resolving the application context, address and transaction ids presented in the incoming TCAP message to SCTP associations and destinations within the IP network. The TMF will select the key information available. The Routing Keys reference an Application Server, which will normally have one or more ASPs processing transactions for the AS. The availability and status of the ASPs is handled by TUA ASP management messages. Possible SS7 application context, address or routing information that comprise a Routing Key entry includes, for example, SCCP subsystem number and SCCP addresses and Global Title addresses, Transaction ID, and Application Context. It is expected that the routing keys will be provisioned via a MIB, dynamic registration or an external process, such as a database. 1.4.4.1. Transaction Mapping at the SG To direct messages received from the SS7 network to the appropriate IP destination, the SGP must perform a transaction mapping function using information from the received TCAP message. To support this transaction mapping, the SGP might, for example, maintain the equivalent of a network address translation table, mapping incoming TCAP message information to an Application Server for a particular application and set of transactions. This could be accomplished by comparing the addressing, dialog or component portions of the incoming TCAP message to currently defined Routing Keys in the SGP. These Routing Keys could in turn map directly to an Application Server that is enabled by one or more ASPs. These ASPs proxy dynamic status information regarding their availability, transaction handling capabilities and congestion to the SGP using various management B. Bidulock Version 0.5 Page 11 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 messages defined in the TUA protocol. The list of ASPs in the AS is assumed to be dynamic, taking into account the availability, transaction handling capability and congestion status of the individual ASPs in the list, as well as configuration changes and possible fail-over mechanisms. Normally, one or more ASPs are active in the AS (i.e, currently processing transactions) but in certain failure and transition cases it is possible that there may not be an active ASP available. The SGP will buffer the message destined for this AS for a time T(r) or until an ASP becomes available. When no ASP becomes available before expiry of T(r), the SGP will flush the buffered messages and initiate the appropriate TCAP abort procedures. If there is no transaction mapping function match for an incoming message, a default treatment MAY be specified. Possible solutions are to provide a default Application Server to direct all unallocated transactions to a (set of) default ASP(s), or to drop the messages and provide a notification to management. The treatment of unallocated transactions is implementation dependent. 1.4.4.2. Transaction Mapping at the ASP To direct messages to the SS7 network, the ASP MAY perform a transaction mapping to choose the proper SGP for the given message. This is accomplished by observing the Application Context, Destination Address, Destination Transaction Id, and other elements of the outgoing message, SS7 network status, SGP availability, and Routing Context configuration tables. A Signalling Gateway may be composed of one or more SGPs <2>. There is, however, no TUA messaging to manage the status of an SGP. Whenever an SCTP association to an SGP exists, it is assumed to be available. Also, every SGP of one SG communicating with one ASP regarding one AS provides identical SS7 connectivity to this ASP. In general, an ASP routes all responses to the SGP that it received messages from; within the routing context which it is currently active and receiving transactions. The ASP uses the routing context to select the SGP. 1.4.5. Signalling Gateway SS7 Layers The SG is responsible for terminating up to the TC-user of the SS7 protocol, and offering an IP-based extension to its users. From an SS7 perspective, it is expected that the Signalling Gateway transmits and receives TCAP messages to and from the SS7 Network over standard SS7 network interfaces, using the services of the SCCP [Q.711] and MTP [Q.704] to provide transport of the messages. B. Bidulock Version 0.5 Page 12 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Note that it is also possible for the SCCP services to be provided using the services of the SCCP-User Adaptation Layer (SUA) [SUA] and the MTP3-User Adaptation Layer (M3UA) [M3UA]. The TC-SAP through which TUA at the SG obtains its services could reside at a Signalling Transfer Point (STP) or Signalling End Point (SEP) [Q.705]. 1.4.6. SS7 and TUA Interworking at the SG The SGP provides a functional interworking of transport functions between the SS7 network and the IP network by also supporting the TUA adaptation layer. It allows the TCAP application to exchange components in dialogues with an IP-based Application Server Process where the peer TC-User protocol layer exists. To perform TCAP management, it is required that the TC-User protocols at ASPs receive indications of subsystem availability and congestion, as well as user part availability and signalling point availability and congestion as they would be expected by an SS7 TCAP application. To accomplish this, the N-PCSTATE, N-STATE and N-COORD primitives received at the TCAP upper layer interface at the SG need to be propagated to the remote TC-user lower layer interface at the ASP. SCCP management messages (such as SSP, SSA) and MTP management messages (such as TFP, TFA) received from the SS7 network MUST NOT be encapsulated. The SG MUST terminate these messages and generate TUA message as appropriate. 1.4.7. Application Server A cluster of Application Servers is responsible for providing the overall support for one ore more SS7 upper layers. From an TCAP standpoint, an Application Part provides complete support for the upper layer service within a given Application Context. As an example, an Application Part providing HLR capabilities could provide complete support for GSM MAP HLR (and any other, MSC or VLR application parts located at the signalling point) for a given point code. Where an ASP is connected to more than one SG, the TUA layer must maintain the status of configured SS7 destinations and route messages according to the availability/congestion status of potentially replicated subsystem. 1.4.8. SCTP Stream Mapping The TUA supports SCTP streams. The SG and AS need to maintain a list of SCTP and TC-Users for mapping purposes. TC-Users requiring sequenced message transfer need to be sent over a stream using sequenced delivery. B. Bidulock Version 0.5 Page 13 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 TUA SHOULD NOT use stream 0 for TUA management messages. It is OPTIONAL that sequence delivery be used to preserve the order of management message delivery. All TUA Dialogue Handling (DH) messages not using the optional component handling interface (i.e, DH messages with components included) MAY select unordered delivery, depending on the requirements of the TC-User <3>. All TUA Component Handling (CH) messages and Dialogue Handling (DH) messages with external components SHOULD select ordered delivery. The stream selected is based upon the Sequence Control field in the Quality of Service parameter, the Dialogue Id given by the TC-User over the primitive interface and other traffic information available to the SGP or ASP. 1.4.9. Application Server Redundancy All TQRY and SSNM messages (e.g, TC-BEGIN, N-STATE) which match a provisioned Routing Key at an SGP are mapped to an Application Server. The Application Server is the set of all ASPs associated with a specific Routing Key. Each ASP in this set may be active, inactive or unavailable. Active ASPs handle traffic; inactive ASPs might be used when active ASPs become unavailable. The fail-over model supports an "n+k" redundancy model, where "n" ASPs is the minimum number of redundant ASPs required to handle traffic and "k" ASPs are available to take over for a failed or available ASP. A "1+1" active/backup redundancy is a subset of this model. A simplex "1+0" model is also supported as a subset, with no ASP redundancy. 1.4.10. Flow Control Local Management at an ASP may wish to stop traffic across an SCTP association to temporarily remove the association from service or to perform testing and maintenance activity. The function could optionally be used to control the start of traffic onto a newly available SCTP association. 1.4.11. Congestion Management The TUA layer is informed of local and IP network congestion by means of an implementation-dependent function (e.g, an implementation- dependent indication from the SCTP of IP network congestion). At an ASP or IPSP, the TUA layer indicates congestion to local TC- users by means of an appropriate TCAP primitive (N-PCSTATE, N-STATE, TC-NOTICE), as per current TCAP procedures, to invoke appropriate upper layer responses. When an SG determines that the transport of SS7 messages is encountering congestion, the SG might trigger SS7 Congestion messages to originating SS7 nodes, per the congestion B. Bidulock Version 0.5 Page 14 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 procedures of the relevant SCCP [Q.711], [T1.112] or MTP [T1.111], [Q.704] standard. (The triggering of SS7 Management messages from an SG is an implementation-dependent function.) 1.5. Definition of TUA Boundaries TUA has three protocol boundaries: an upper boundary between TUA and the TC-User; a lower boundary between TUA and SCTP; and a layer management boundary between TUA and the Layer Management Function. Figure 3 illustrates the TUA protocol boundaries. ........... : TC-User : :.........: Layer Upper Boundary : Management ____:____ Boundary ............ | TUA |.............: LM : |_________| :..........: Lower Boundary : .....:..... : SCTP : :.........: Figure 3. TUA Protocol Boundaries 1.5.1. Definition of Upper Boundary The primitives and messages listed in Table 2 are provided between the TUA and TC-User in support of Dialogue Handling [Q.771], [T1.114]. B. Bidulock Version 0.5 Page 15 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Table 2. Mapping of Dialogue Handling Primitives +--------------+------------+-------------+----------------+------+ |Generic | Specific | ITU-T Q.771 | ANSI T1.114 | TUA | |Name | Name | Reference | Message | Msg | +--------------+------------+-------------+----------------+------+ |TC-UNI | Request | 3.1.2.2.1 | Unidirectional | TUNI | | | Indication | | | | +--------------+------------+-------------+----------------+------+ |TC-BEGIN | Request | 3.1.2.2.2.1 | Query w/ Perm | | | | Indication | | | TQRY | +--------------+------------+-------------+----------------+ | |------------- | ---------- | ----------- | Query w/o Perm | | +--------------+------------+-------------+----------------+------+ |TC-CONTINUE | Request | 3.1.2.2.2.2 | | | |(Initial) | Indication | | | | +--------------+------------+-------------+ Conv w/ Perm | | |TC-CONTINUE | Request | 3.1.2.2.2.3 | | TCNV | |(Non-initial) | Indication | | | | +--------------+------------+-------------+----------------+ | |------------- | ---------- | ----------- | Conv w/o Perm | | +--------------+------------+-------------+----------------+------+ |TC-END | Request | | Response | TRSP | | | Indication | | | | +--------------+------------+ 3.1.2.2.2.4 +----------------+------+ |TC-U-ABORT | Request | | U-Abort | TUAB | | | Indication | | | | +--------------+------------+-------------+----------------+------+ |TC-P-ABORT | Indication | 3.1.4.2 | P-Abort | TPAB | +--------------+------------+-------------+----------------+------+ |TC-NOTICE | Indication | 3.1.2.2.3 | -------------- | TNOT | +--------------+------------+-------------+----------------+------+ The primitives and messages listed in Table 3 are provided between the TUA and TC-User in OPTIONAL support of Component Handling [Q.771], [T1.114]. B. Bidulock Version 0.5 Page 16 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Table 3. Mapping of Component Handling Primitives +-------------+------------+-------------+---------------+------+ |Generic | Specific | ITU-T Q.771 | ANSI T1.114 | TUA | |Name | Name | Reference | Message | Msg | +-------------+------------+-------------+---------------+------+ |TC-INVOKE | Request | 3.1.3.2 | Invoke L | | | | Indication | | | CINV | +-------------+------------+-------------+---------------+ | |------------ | ---------- | ----------- | Invoke NL | | +-------------+------------+-------------+---------------+------+ |TC-RESULT-L | Request | 3.1.3.3 | Ret Result L | CRES | |TC-RESULT-NL | Indication | | Ret Result NL | | +-------------+------------+-------------+---------------+------+ |TC-U-ERROR | Request | 3.1.3.4 | Ret Error | CERR | | | Indication | | | | +-------------+------------+-------------+---------------+------+ |TC-U-REJECT | Request | 3.1.3.5 | | | | | Indication | | | | +-------------+------------+-------------+ | | |TC-L-REJECT | Request | | Reject | CREJ | | | Indication | | | | +-------------+------------+ 3.1.4.1 | | | |TC-R-REJECT | Request | | | | | | Indication | | | | +-------------+------------+-------------+---------------+------+ |TC-U-CANCEL | Request | 3.1.3.6 | | CCAN | |TC-L-CANCEL | Indication | | ------------- | | +-------------+------------+-------------+---------------+------+ 1.5.2. Definition of Boundary between TUA and Layer Management M-SCTP_ESTABLISH request Direction: LM->TUA Purpose: LM request ASP to establish an SCTP association with its peer. M-SCTP_ESTABLISH confirm Direction: TUA -> LM Purpose: ASP confirms to LM that it has established an SCTP association with its peer. M-SCTP_ESTABLISH indication Direction: TUA -> LM Purpose: TUA informs LM that a remote ASP has established an SCTP association. M-SCTP_RELEASE request Direction: LM -> TUA B. Bidulock Version 0.5 Page 17 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Purpose: LM requests ASP to release an SCTP association with its peer. M-SCTP_RELEASE confirm Direction: TUA -> LM Purpose: ASP confirms to LM that it has released SCTP association with its peer. M-SCTP_RELEASE indication Direction: TUA -> LM Purpose: TUA informs LM that a remote ASP has released an SCTP Association or the SCTP association has failed. M-SCTP RESTART indication Direction: TUA -> LM Purpose: TUA informs LM that an SCTP restart indication has been received. M-SCTP_STATUS request Direction: LM -> TUA Purpose: LM requests TUA to report the status of an SCTP association. M-SCTP_STATUS confirm Direction: TUA -> LM Purpose: TUA responds with the status of an SCTP association. M-SCTP_STATUS indication Direction: TUA -> LM Purpose: TUA reports the status of an SCTP association. M-ASP_STATUS request Direction: LM -> TUA Purpose: LM requests TUA to report the status of a local or remote ASP. M-ASP_STATUS confirm Direction: TUA -> LM Purpose: TUA reports status of local or remote ASP. M-AS_STATUS request Direction: LM -> TUA Purpose: LM requests TUA to report the status of an AS. M-AS_STATUS confirm Direction: TUA -> LM Purpose: TUA reports the status of an AS. M-NOTIFY indication Direction: TUA -> LM Purpose: TUA reports that it has received a Notify (NTFY) message from its peer. B. Bidulock Version 0.5 Page 18 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 M-ERROR indication Direction: TUA -> LM Purpose: TUA reports that it has received an Error (ERR) message from its peer or that a local operation has been unsuccessful. M-ASP_UP request Direction: LM -> TUA Purpose: LM requests ASP to start its operation and send an ASP Up (ASPUP) message to its peer. M-ASP_UP confirm Direction: TUA -> LM Purpose: ASP reports that is has received an ASP UP Ack (ASPUP ACK) message from its peer. M-ASP_UP indication Direction: TUA -> LM Purpose: TUA reports it has successfully processed an incoming ASP Up (ASPUP) message from its peer. M-ASP_DOWN request Direction: LM -> TUA Purpose: LM requests ASP to stop its operation and send an ASP Down (ASPDN) message to its peer. M-ASP_DOWN confirm Direction: TUA -> LM Purpose: ASP reports that is has received an ASP Down Ack (ASPDN ACK) message from its peer. M-ASP_DOWN indication Direction: TUA -> LM Purpose: TUA reports it has successfully processed an incoming ASP Down (ASPDN) message from its peer, or the SCTP association has been lost or reset. M-ASP_ACTIVE request Direction: LM -> TUA Purpose: LM requests ASP to send an ASP Active (ASPAC) message to its peer. M-ASP_ACTIVE confirm Direction: TUA -> LM Purpose: ASP reports that is has received an ASP Active Ack (ASPAC ACK) message from its peer. M-ASP_ACTIVE indication Direction: TUA -> LM Purpose: TUA reports it has successfully processed an incoming ASP Active (ASPAC) message from its peer. B. Bidulock Version 0.5 Page 19 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 M-ASP_INACTIVE request Direction: LM -> TUA Purpose: LM requests ASP to send an ASP Inactive (ASPIA) message to its peer. M-ASP_INACTIVE confirm Direction: LM -> TUA Purpose: ASP reports that is has received an ASP Inactive Ack (ASPIA ACK) message from its peer. M-ASP_INACTIVE indication Direction: TUA -> LM Purpose: TUA reports it has successfully processed an incoming ASP Inactive (ASPIA) message from its peer. M-AS_ACTIVE indication Direction: TUA -> LM Purpose: TUA reports that an AS has moved to the AS-ACTIVE state. M-AS_INACTIVE indication Direction: TUA -> LM Purpose: UA reports that an AS has moved to the AS-INACTIVE state. M-AS_DOWN indication Direction: TUA -> LM Purpose: UA reports that an AS has moved to the AS-DOWN state. If the TUA layer supports dynamic registration of Routing Key, the layer MAY support the following additional primitives: M-RK_REG request Direction: LM -> TUA Purpose: LM requests ASP to register RK(s) with its peer by sending Registration Request (REG REQ) message M-RK_REG confirm Direction: TUA -> LM Purpose: ASP reports that it has received Registration Response (REG RSP) message with registration status as successful from its peer. M-RK_REG indication Direction: TUA -> LM Purpose: TUA informs LM that it has successfully processed an incoming Registration Request (REG REQ) message. M-RK_DEREG request Direction: LM -> TUA B. Bidulock Version 0.5 Page 20 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Purpose: LM requests ASP to deregister RK(s) with its peer by sending Deregistration Request (DEREG REQ) message. M-RK_DEREG confirm Direction: TUA -> LM Purpose: ASP reports that it has received Deregistration Request (DEREG REQ) message with deregistration status as successful from its peer. M-RK_DEREG indication Direction: TUA -> LM Purpose: TUA informs LM that it has successfully processed an incoming DEREG REQ from its peer. 1.5.3. Definition of the Lower Boundary The upper layer primitives provided by the SCTP are provided in the SCTP specification "Stream Control Transmission Protocol (SCTP)" [SCTP]. Notes for Section 1 <1> IMPLEMENTATION NOTE:- Only one SCTP port may be defined for each endpoint, but each SCTP endpoint may have multiple IP addresses [SCTP]. <2> IMPLEMENTATION NOTE:- Where more than one route (or SG) is possible for routing to the SS7 network, the ASP could, for example, maintain a dynamic table of available SG routes for the SS7 destinations and subsystems, taking into account the destination and subsystem availability and congestion status received from the SG(s), the availability status of individual SGs and configuration changes or fail-over mechanisms. <3> IMPLEMENTATION NOTE:- When the TC-User selects sequenced delivery using the "Sequence Control" fields in the Quality of Service parameter, the DH message SHOULD be sent on an SCTP stream using ordered delivery. When the TC-User does not select sequenced delivery and does not utilize the optional component handling interface (i.e. the DH message has components included), the DH message MAY be sent on an SCTP stream using unordered delivery. 2. Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. In this document, the following conventions are used to describe how a parameter is used in the message: B. Bidulock Version 0.5 Page 21 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Mandatory The parameter MUST be present in the message. A message listing a parameter as Mandatory without containing such a parameter is is incorrectly formatted. Conditional The parameter SHOULD be present in the message under the conditions specified. A message listing a parameter as Conditional without containing such a parameter under the conditions specified is incorrectly formatted. Optional The parameter MAY be present in the message as specified. A message listing a parameter as Optional without containing such a parameter is correctly formatted. 3. Protocol Elements The general message format includes a Common Message Header together with a list of zero or more parameters as defined by the Message Type. For forward compatibility, all Message Types MAY have attached parameters even if none are specified in this version. 3.1. Common Message Header The protocol messages for the TCAP-User Adaptation Protocol (TUA) require a message structure that contains a version, message type, message length and message contents: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version | Reserved | Message Class | Message Type | +---------------+---------------+---------------+---------------+ | Message Length | +---------------------------------------------------------------+ | Message Data | Notes: + This message header is common among all signalling protocol adaptation layers. + The 'data' portion of TUA messages SHALL contain zero or more TUA parameters, and SHALL NOT contain an encapsulated TCAP message. + Optional parameters can only occur at most once in a TUA message. + All fields in the TUA message MUST be transmitted in the network byte order, unless otherwise stated. + The Reserved field is set to 0 in messages sent and is not examined in messages received. B. Bidulock Version 0.5 Page 22 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.1.1. TUA Protocol Version Version: 8-bits (unsigned integer) The Version field of the Common Message Header contains the version of the TUA adaptation layer. The supported versions are: 1 - TUA Version 1.0 3.1.2. Message Classes Message Class: 8-bits (unsigned integer) The Message Class field of the Common Message Header contains the class of the message. The supported classes are as follows: 0 Management (MGMT) Message 7 Reserved for Other Signalling Adaptation Layers 2 SS7 Signalling Network Management (SSNM) Messages 3 ASP State Maintenance (ASPSM) Messages 4 ASP Traffic Maintenance (ASPTM) Messages 5 TUA Dialogue Handling (DH) Messages 6 TUA Component Handling (CH) Messages 7 Reserved for Other Signalling Adaptation Layers 8 Reserved for Other Signalling Adaptation Layers 9 Routing key Management (RKM) Messages 10 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions 3.1.3. Message Types Message Type: 8-bits (unsigned integer) The Message Type field of the Common Message Header contains the type of message within a message class. The supported types of messages within the supported classes are as follows: Management (MGMT) Messages 0 Error (ERR) 1 Notify (NTFY) 2 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions SS7 Signalling Network Management (SSNM) Messages 0 Reserved 1 Destination Unavailable (DUNA) 2 Destination Available (DAVA) 3 Destination State Audit (DAUD) B. Bidulock Version 0.5 Page 23 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4 Destination Congestion (SCON) 5 Destination User Part Unavailable (DUPU) 6 Destination Restricted (DRST) 7 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions Application Server Process State Maintenance (ASPSM) Messages 0 Reserved 1 ASP Up (UP) 2 ASP Down (DOWN) 3 Heartbeat (BEAT) 4 ASP Up Ack (UP ACK) 5 ASP Down Ack (DOWN ACK) 6 Heartbeat Ack (BEAT ACK) 7 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions Application Server Process Traffic Maintenance (ASPTM) Messages 0 Reserved 1 ASP Active (ASPAC) 2 ASP Inactive (ASPIA) 3 ASP Active Ack (ASPAC ACK) 4 ASP Inactive Ack (ASPIA ACK) 5 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions Routing Key Management (RKM) Messages 0 Reserved 1 Registration Request (REG REQ) 2 Registration Response (REG RSP) 3 Deregistration Request (DEREG REQ) 4 Deregistration Response (DEREG RSP) 5 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions TUA Dialogue Handling (DH) Messages 0 Unidirectional(TUNI) 1 Query (TQRY) 2 Conversation (TCNV) 3 Response (TRSP) 4 U-Abort (TUAB) 5 P-Abort (TPAB) 6 Notice (TNOT) 7 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions TUA Component Handling (CH) Messages 1 Invoke (CINV) 2 Result (CRES) 3 Error (CERR) 4 Reject (CREJ) 5 Cancel (CCAN) B. Bidulock Version 0.5 Page 24 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 6 - 127 Reserved by the IETF 128 - 255 Reserved for IETF-Defined Message Class Extensions 3.1.4. Message Length Message Length: 32-bits (unsigned integer) The Message Length field of the Common Message Header defines the length of the message in octets, including the header. 3.1.5. Tag-Length-Value Format TUA messages consist of a Common Message Header followed by zero or more parameters, as defined by the message type. The Tag-Length-Value (TLV) parameters contained in a message are defined in a Tag-Length- Value format as shown below <1>. 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Parameter Tag | Parameter Length | +-------------------------------+-------------------------------+ \ \ / Parameter Value / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Parameter Tag: 16-bits (unsigned integer) The Parameter Tag field is a 16-bit identifier of the type of parameter. It takes a value of 0 to 65534. Parameter Length: 16-bits (unsigned integer) The Parameter Length field contains the size of the parameter in bytes, including the Parameter Tag, Parameter Length, and Parameter Value fields. The Parameter Length does not include any padding bytes. However, composite parameters will contain all padding bytes, since all parameters contained within this composite parameter will considered multiples of 4 bytes. Parameter Value: variable-length The Parameter Value field contains the actual information to be transferred in the parameter. The total length of a parameter (including Tag, Parameter Length and Value fields) MUST be a multiple of 4 bytes. If the length of the parameter is not a multiple of 4 bytes, the sender MUST pad the Parameter at the end (i.e., after the Parameter Value field) with all zero bytes. The length of the padding MUST NOT be included in the parameter length field. A sender SHOULD NOT pad with more than 3 bytes. The receiver MUST ignore the padding bytes. B. Bidulock Version 0.5 Page 25 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.2. TUA Message Header In addition to the Common Message Header, a specific message header is included for TUA messages. The TUA message header will immediately follow the Common Message Header in TUA Dialogue Handling (DH) and Component Handling (CH) messages. The TUA Message Header is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Routing Context | +-------------------------------+-------------------------------+ | Tag = 0x0013 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Correlation Id | +-------------------------------+-------------------------------+ | Tag = 0x0401 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Dialogue Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TUA Message header can contain the following parameters: Parameters --------------------------------------------- Routing Context Conditional *1 Correlation Id Conditional *2 Dialogue Id Conditional *3 Note 1: When an ASP is registered or configured for multiple AS with an SG, the Routing Context MUST be present in the TUA Message Header. The Routing Context SHOULD always be placed in the TUA Message Header. When the Routing Context is present in the TUA Message Header it SHOULD be placed first in the header because the context of the Dialogue Id depends on the Routing Context. Note 2: Under some circumstances, the Correlation Id parameter MUST be included in the TUA Message Header. See sections "Correlation Id" and "ASP Active Procedures". Note 3: When an AS is handling multiple Dialogues, the Dialogue Id parameter MUST be placed in the TUA Message Header. The Dialogue Id parameter SHOULD always be placed in the TUA Message Header. The Dialogue Id parameter MAY be excluded from the TUA header for TUNI and TPAB DH messages, or may be B. Bidulock Version 0.5 Page 26 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 included but then MUST contain a value of zero. 3.3. TUA Dialogue Handling (DH) Messages The following section describes the TUA Dialogue Handling (DH) messages and parameter contents. The general message format includes a Common Message Header, the TUA Message Header and the DH Message Header, together with a list of zero or more parameters as defined by the Message Type. For forward compatibility, all Message Types MAY have optional attached parameters in addition to the message headers. 3.3.1. DH Message Header In addition to the Common Message Header and TUA Message Header, a specific message header is included for TUA Dialogue Handling (DH) messages. The DH Message Header will immediately follow the TUA Message header in these messages. The DH Message Header is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0402 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Dialogue Flags | +-------------------------------+-------------------------------+ | Tag = 0x0403 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Quality of Service | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DH Message header contains the following parameters: Parameters ------------------------------------------ Dialogue Flags Mandatory Quality of Service Mandatory 3.3.2. Unidirectional (TUNI) The Unidirectional (TUNI) Request message is sent from an ASP to an SG or IPSP to invoke a TCAP class 4 operation. The TUNI Indication message is sent from an SGP to an ASP to indicate the TCAP class 4 operation. The TUNI message corresponds to the ITU-T `TC-UNI' primitive [Q.771], and the ITU-T and ANSI `Unidirectional' message [T1.114], [Q.773]. B. Bidulock Version 0.5 Page 27 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The TUNI message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0404 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Destination Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0405 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Originating Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Application Context Name / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0408 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Security Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0409 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Confidentiality / \ \ +-------------------------------+-------------------------------+ | Tag = 0x040E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Components / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TUNI message can contain the following parameters: B. Bidulock Version 0.5 Page 28 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters --------------------------------------------- Destination Address Conditional *1 Originating Address Conditional *1 Application Context Name Optional User Information Optional Security Context Optional Confidentiality Optional Components Optional *2 Note 1: The Destination Address or Originating Address parameter MUST be present in the TUNI message when either parameter is not implied by the Routing Context in the TUA Message Header. Note 2: Any components SHOULD be included in the TUNI messages but MAY be formatted in separate TUA Component Handling (CH) messages. 3.3.3. Query (TQRY) The Query (TQRY) message is sent to a TUA peer to begin a new dialogue between TC-Users. The TQRY message corresponds to the ITU-T `TC-BEGIN' primitive [Q.771], the ITU-T `Begin' message [Q.773] and the ANSI `Query' message [T1.114]. The TQRY message is formatted as follows: B. Bidulock Version 0.5 Page 29 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0410 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Transaction Id | +-------------------------------+-------------------------------+ | Tag = 0x0404 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Destination Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0405 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Originating Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Application Context Name / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0408 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Security Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0409 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Confidentiality / \ \ +-------------------------------+-------------------------------+ | Tag = 0x040E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Components / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TQRY message can contain the following parameters: B. Bidulock Version 0.5 Page 30 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters --------------------------------------------- Transaction Id Mandatory Destination Address Conditional *1 Originating Address Conditional *1 Application Context Name Optional User Information Optional Security Context Optional Confidentiality Optional Components Optional *2 Note 1: The Destination Address or Originating Address parameter MUST be present in the TQRY message when the parameter is not implied by the Routing Context in the TUA Message Header. Note 2: Any components SHOULD be included in the TQRY messages but MAY be formatted in separate Component Handling (CH) messages. 3.3.4. Conversation (TCNV) The Conversation (TCNV) message is used in response to a TQRY message or another TCNV message. When sent in response to a TQRY message, the TCNV message confirms and continues a dialogue; when in response to a received TCNV message, it only continues a dialogue. The Dialogue Flags in the DH Message Header indicate whether the initiator of the TCNV message give permission to the peer to terminate the dialogue. The TCNV message corresponds to the ITU-T `TC-CONTINUE' primitive [Q.771], ITU-T `Continue' message [Q.773] and the ANSI `Conversation' message [T1.114]. The TCNV message is formatted as follows: B. Bidulock Version 0.5 Page 31 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0410 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Transaction Id | +-------------------------------+-------------------------------+ | Tag = 0x0405 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Originating Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Application Context Name / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0408 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Security Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0409 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Confidentiality / \ \ +-------------------------------+-------------------------------+ | Tag = 0x040E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Components / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TCNV message can contain the following parameters: Parameters --------------------------------------------- Transaction Id Conditional *1 B. Bidulock Version 0.5 Page 32 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Originating Address Conditional *2 Application Context Name Conditional *3 User Information Conditional *3 Security Context Conditional *3 Confidentiality Conditional *3 Components Optional *4 Note 1: The Transaction Id parameter MUST be present in the TCNV message when the message is sent in response to a TQUR message. The Transaction Id parameter contains the Transaction Identifier assigned by the remote TC-User. Note 2: The Originating Address parameter MUST be present in the TCNV message when the message is used in response to a TQRY message and the parameter is not implied by the Routing Context in the TUA Message Header. Note 3: These dialogue portion parameters SHOULD only be optionally included in the TCNV message when the message is used in response to a TQRY message. When the TCNV message is sent in response to a received TCNV message, these parameters SHOULD NOT be included in the responding TCNV message. Note 4: Any components SHOULD be included in the TCNV messages but MAY be formatted in separate Component Handling (CH) messages. 3.3.5. Response (TRSP) The Response (TRSP) message is used in response to a TQRY message or TCNV message to complete and existing dialogue. When sent in response to a TQRY message, the TRSP message confirms and completes a dialogue; when in response to a received TCNV message, it only terminates a dialogue. The TRSP message corresponds to the ITU-T `TC-END' primitive [Q.771], ITU-T `End' message [Q.773] and the ANSI `Response' message [T1.114]. The TRSP message is formatted as follows: B. Bidulock Version 0.5 Page 33 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Termination | +-------------------------------+-------------------------------+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Application Context Name / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0408 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Security Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0409 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Confidentiality / \ \ +-------------------------------+-------------------------------+ | Tag = 0x040E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Components / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TRSP message can contain the following parameters: Parameters ------------------------------------------- Termination Mandatory Application Context Name Optional *1 User Information Optional *1 Security Context Optional *1 Confidentiality Optional *1 Components Optional *2 B. Bidulock Version 0.5 Page 34 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Note 1: These dialogue portion parameters SHOULD only be optionally included in the TRSP message when it is issued in response to an TQRY message. When the TRSP message is in response to a TCNV message, the dialogue portion parameters SHOULD NOT be included in the TRSP message. Note 2: Any components SHOULD be included in the TRSP messages but MAY be formatted in separate TUA Component Handling (CH) messages. 3.3.6. U-Abort (TUAB) The TUA peer sends an U-Abort (TUAB) message when it wishes to abort a dialogue, either under TUA-user control (TC-U-ABORT). When sent in response to a TQRY message, the TUAB message negatively confirms and aborts a dialogue; when in response to a received TCNV message, it only aborts a dialogue. The TUAB message corresponds to the ITU-T `TC-U-ABORT' primitive [Q.771], the ITU-T `Abort' message [Q.773] and the ANSI `Abort' message [T1.114]. The TUAB message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Abort Reason | +-------------------------------+-------------------------------+ | Tag = 0x0405 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Originating Address / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Application Context Name / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TUAB message can contain the following parameters: B. Bidulock Version 0.5 Page 35 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters --------------------------------------------- Abort Reason Mandatory Application Context Name Conditional *1 User Information Optional *2 Note 1: These dialogue portion parameters SHOULD only be optionally included in the TUAB message when it is issued in response to an TQRY message. When the TUAB message is in response to a TCNV message, the dialogue portion parameters SHOULD NOT be included in the TUAB message. Note 2: The User Information parameter carries any User Abort Information. 3.3.7. P-Abort (TPAB) The TUA peer sends an P-Abort (TPAB) message when it wishes to abort a dialogue, either under TUA control (TC-P-ABORT). The TPAB message corresponds to the ITU-T `TC-P-ABORT' primitive [Q.771], the ITU-T `Abort' message [Q.773] and the ANSI `Abort' message [T1.114]. The TPAB message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Abort Cause | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TPAB message can contain the following parameters: Parameters ------------------------------------------ Abort Cause Mandatory 3.3.8. Notice (TNOT) An SG sends a Notice (TNOT) message when it wishes to inform the ASP of a network condition that concerns the transmission of TCAP or TUA messages to the remote TC-User in a dialogue [Q.775]. It is used at the SG when an SCCP message containing TC-User information from an AS has been returned in a UDTS when the "Return Option" flag was set in the Quality of Service parameters when the message was sent. B. Bidulock Version 0.5 Page 36 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The TNOT message corresponds to the ITU-T [Q.771] TC-NOTICE primitive. The TNOT message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Report Cause | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The TNOT message can contain the following parameters: Parameters ------------------------------------------ Report cause Mandatory 3.4. TUA Component Handling (CH) Messages The following section describes the TUA Component Handling messages and parameter contents. The general message format includes a Common Message Header, a TUA Message Header, a CH Message Header, followed by a list of zero or more parameters as defined by the Message Type. For forward compatibility, all Message Types MAY have attached optional parameters in addition to the message headers. Component Handling (CH) messages are used to convey components associated with operations within a dialogue. They are issued prior to the Dialogue Handling (DH) message with which they are associated, but are received after receiving a Dialogue Handling (DH) message that has the "Components Present" bit set in the Dialogue Flags parameter within the DH message. 3.4.1. CH Message Header In addition to the Common Message Header and TUA Message Header, a specific message header is included for TUA Component Handling (CH) messages. The CH Message Header will immediately follow the TUA Message Header in these messages. The CH Message Header if formatted as follows: B. Bidulock Version 0.5 Page 37 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0411 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Invoke Id | +-------------------------------+-------------------------------+ | Tag = 0x0412 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Linked Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The CH Message Header can contain the following parameters: Parameters ------------------------------------------ Invoke Id Mandatory Linked Id Optional 3.4.2. Invoke (CINV) The Invoke (CINV) message is used to invoke an operation within a dialogue. The CINV message corresponds to the ITU-T `TC-INVOKE' primitive [Q.771], the ITU-T `Invoke' component [Q.773], and the ANSI `Invoke (Last)' and `Invoke (Not Last)' components [T1.114]. The CINV message is formatted as follows: B. Bidulock Version 0.5 Page 38 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0413 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Component Flags | +-------------------------------+-------------------------------+ | Tag = 0x0418 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Timeout | +-------------------------------+-------------------------------+ | Tag = 0x0414 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Operation / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0415 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Parameters / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The CINV message can contain the following parameters: Parameters ------------------------------------------- Component Flags Mandatory *1 Timeout Mandatory Operation Mandatory Parameters Optional Note 1: The Component Flags parameter MAY be ignored by the receiver of the CINV message for ITU-T protocol variants of TC-Users that do not support the concept of a "Not Last" TC-INVOKE primitive. 3.4.3. Result (CRES) The Result (CRES) message is used to report the successful completion of an operation within a dialogue. The CRES message corresponds to the ITU-T `TC-RESULT-L' and `TC- RESULT-NL' primitives [Q.771], the ITU-T `Return Result (Last)' and `Return Result (Not Last)' components [Q.773] and the ANSI `Return Result (Last)' and `Return Result (Not Last)' components. The CRES message is formatted as follows: B. Bidulock Version 0.5 Page 39 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0413 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Component Flags | +-------------------------------+-------------------------------+ | Tag = 0x0414 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Operation / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0415 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Parameters / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The CRES message can contain the following parameters: Parameters --------------------------------------------- Component Flags Mandatory Operation Conditional *1 Parameters Optional Note 1: The Operation parameter MUST be present in the CRES message when the Parameters parameter is also present. 3.4.4. Error (CERR) The Error (CERR) message is used to report the failure of an operation within a dialogue. The CERR message corresponds to the ITU-T `TC-U-ERROR' primitive [Q.771], the ITU-T `Return Error' component [Q.773] and the ANSI `Return Error' component [T1.114]. The CERR message is formatted as follows: B. Bidulock Version 0.5 Page 40 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0416 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Error / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0415 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Parameters / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The CERR message can contain the following parameters: Parameters --------------------------------------------- Error Mandatory Parameters Conditional *1 Note 1: The Parameters parameter is only included in the message for specific error codes. 3.4.5. Reject (CREJ) The Reject (CREJ) message is used to reject an operation within a dialogue. The CREJ message corresponds to the ITU-T `TC-L-REJECT', `TC-R- REJECT' and `TC-U-REJECT' primitives [Q.771], the ITU-T `Reject' component [Q.773] and the ANSI `Reject' component [T1.114]. The CREJ message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0417 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Problem Code / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The CREJ message can contain the following parameters: B. Bidulock Version 0.5 Page 41 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters ------------------------------------------ Problem Code Mandatory 3.4.6. Cancel (CCAN) The Cancel (CCAN) message is used to cancel an operation within a dialogue.i The CCAN message corresponds to the ITU-T `TC-L-CANCEL' and `TC-U- CANCEL' primitives [Q.771]. The CCAN message presently contains no Message-Type-specific parameters. 3.5. SS7 Signalling Network Management (SSNM) Messages SS7 Signalling Network Management (SSNM) Messages are used to convey network management information to the TC-User. Theses messages correspond to specific N-STATE, N-PCSTATE and N-COORD primitives. 3.5.1. Destination Unavailable (DUNA) The Destination Unavailable (DUNA) message is sent from an SGP to all concerned ASPs to indicate the unavailability of an SS7 SCCP subsystem or signalling point. The TC-User at the ASP is expected to stop traffic to TC-User peers at the affected subsystems or signalling points via the SG initiating the DUNA message. When the DUNA message contains the Subsystem Number parameter, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-STATE' primitive. When the DUNA message does not contain the Subsystem Number parameter, message, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-PCSTATE' primitive. The DUNA message is formatted as follows: B. Bidulock Version 0.5 Page 42 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x041A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Multiplicity Indicator | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DUNA message can contain the following parameters: Parameters ---------------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory Subsystem Number Conditional *1 Subsystem Multiplicity Indicator Optional *2 Info String Optional Note 1: The Subsystem Number parameter SHALL be present in the DUNA message when indicating the unavailability of a subsystem, and SHALL NOT be present when indicating the unavailability of a signalling point. Note 2: The Subsystem Multiplicity Indicator parameter SHOULD NOT be present in the DUNA message when the Subsystem Number parameter is not also present. B. Bidulock Version 0.5 Page 43 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.5.2. Destination Available (DAVA) The Destination Available (DAVA) message is sent from an SGP to all concerned ASPs to indicate the availability of an SS7 SCCP Subsystem or signalling point. The TC-User at the ASP is expected to resume traffic to TC-Users peers at the affected subsystems or signalling points via the SG initiating the DAVA message. When the DAVA message contains the Subsystem Number parameter, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-STATE' primitive. When the DAVA message does not contain the Subsystem Number parameter, message, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-PCSTATE' primitive. The DAVA message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x041A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Multiplicity Indicator | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DAVA message can contain the following parameters: B. Bidulock Version 0.5 Page 44 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters ---------------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory Subsystem Number Conditional *1 Subsystem Multiplicity Indicator Optional *2 Info String Optional Note 1: The Subsystem Number parameter SHALL be present in the DAVA message when indicating the availability of a subsystem, and SHALL NOT be present when indicating the availability of a signalling point. Note 2: The Subsystem Multiplicity Indicator parameter SHOULD NOT be present in the DAVA message when the Subsystem Number parameter is not also present. 3.5.3. Destination State Audit (DAUD) The Destination State Audit (DAUD) message is sent from an ASP to an SG to query the availability state of routes to SS7 SCCP subsystems or signalling points. A DAUD message MAY be sent periodically after the ASP has received a DUNA message, and until a DAVA is received for the affected subsystem or signalling point. The DAUD message can also be sent when an ASP recovers from isolation from the SG. When the DAVA message contains the Subsystem Number parameter, the message is soliciting responses that correspond to the ITU-T [Q.711] and ANSI [T1.112] `N-STATE' primitive. When the DAVA message does not contain the Subsystem Number parameter, message, the message soliciting responses that correspond to the ITU-T [Q.711] and ANSI [T1.112] `N-PCSTATE' primitive. The DAUD message is formatted as follows: B. Bidulock Version 0.5 Page 45 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DAUD message can contain the following parameters: Parameters --------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory Subsystem Number Conditional *1 Info String Optional Note 1: The Subsystem Number parameter SHALL be present in the DAVA message when auditing the status of a subsystem, and SHALL NOT be present when auditing the status of a signalling point. 3.5.4. Network Congestion (SCON) The Network Congestion (SCON) message is sent from an SG to all concerned ASPs to indicate that the congestion level in the SS7 network to a specified subsystem or signalling point has changed. The TC-User at the ASP is expected to stop traffic at the indicated importance level to TC-User peers at the affected subsystems or signalling points via the SG initiating the SCON message. When the SCON message contains the Subsystem Number parameter, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-STATE' B. Bidulock Version 0.5 Page 46 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 primitive. When the SCON message does not contain the Subsystem Number parameter, message, the message corresponds to the ITU-T [Q.711] and ANSI [T1.112] `N-PCSTATE' primitive. The SCON message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x041B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Congestion Level | +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x041A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Multiplicity Indicator | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The SCON message can contain the following parameters: Parameters -------------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory Congestion Level Mandatory Subsystem Number Optional *1 Subsystem Multiplicity Indicator Optional *2 B. Bidulock Version 0.5 Page 47 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Info String Optional Note 1: The Subsystem Number parameter SHALL be present in the SCON message when indicating the congestion of a subsystem, and SHALL NOT be present when indicating the congestion of a signalling point. Note 2: The Subsystem Multiplicity Indicator parameter SHOULD NOT be present in the SCON message when the Subsystem Number parameter is not also present. 3.5.5. Destination User Part Unavailable (DUPU) The Destination User Part Unavailable (DUPU) message is sent from an SG to all concerned ASPs to indicate the unavailability of an SS7 SCCP. The DUPU message corresponds to the ITU [Q.711] and ANSI [T1.112] `N-PCSTATE' primitive. The DUPU message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x041C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | User/Cause | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DUPU message can contain the following parameters: B. Bidulock Version 0.5 Page 48 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters ------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory User/Cause Mandatory *1 Info String Optional Note 1: The User field of the )User/Cause parameter must indicate an SCCP MTP-User part and can be ignored by the receiver of the DUPU message. 3.5.6. Destination Restricted (DRST) The Destination Restricted (DRST) message is sent from an SG to all concerned ASPs to indicate one of the following: (1) A replicated subsystem is requesting that the TUA layer at the ASP accept transactions for the affected subsystem. The TUA layer at the ASP is expected to determine whether it can accept the traffic of the affected subsystem and respond with a DRST message. (2) An SG representing a signalling transfer point is requesting that the TUA layer at the ASP routing message traffic via an alternate SG if possible. The DRST is sent from an ASP to an SG in response to a DRST from the SG when the TUA layer at the ASP is prepared to accept traffic for the affected subsystem. When the DRST message contains the Subsystem Number parameter, this message corresponds to the ITU [Q.711] and ANSI [T1.112] `N-COORD' primitive. When the DRST message contains the Subsystem Multiplicity Indicator parameter, the message corresponds to the `Request' and `Indication' forms of the `N-COORD' primitive; when it dos not include the parameter, it corresponds to the `Response' and `Confirm' forms of the `N-COORD' primitive. When the DRST message does not contain the Subsystem Number parameter, the message corresponds to the ITU [Q.704] and ANSI [T1.111] `Transfer Restricted' message. The DRST message is formatted as follows: B. Bidulock Version 0.5 Page 49 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x041A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Multiplicity Indicator | +-------------------------------+-------------------------------+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DRST message can contain the following parameters: Parameters ---------------------------------------------------- Routing Context Mandatory Affected Point Code Mandatory *1 Subsystem Number Conditional *2 Subsystem Multiplicity Indicator Conditional *3 Info String Optional Note 1: The Affected Point Code parameter refers to the node which has become restricted or which has requested coordinated service outage. Note 2: The Subsystem Number parameter SHALL be present in the SCON message when requesting or responding to a subsystem coordinated service outage, and SHALL NOT be present when indicating the restriction of a signalling point. Note 3: The Subsystem Multiplicity Indicator parameter SHOULD NOT be present in the SCON message when the Subsystem Number parameter is not also present. The Subsystem Multiplicity B. Bidulock Version 0.5 Page 50 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Indicator parameter SHALL be present in the SCON message when requesting or indicating a coordinated service outage, and SHALL NOT be present when responding to or confirming a coordinated service outage. 3.6. Application Server Process State Maintenance (ASPSM) Messages 3.6.1. ASP Up (UP) The ASP Up (UP) message is used to indicate to a remote TUA peer that the Adaptation layer is up and running. The ASP UP message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0011 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | ASP Identifier | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASP UP message can contain the following parameters: Parameters --------------------------------------------- ASP Identifier Conditional *1 Info String Optional Note 1: ASP Identifier MUST be used where the IPSP/SGP cannot identify the ASP by pre-configured address/port number information (e.g, where an ASP is resident on a Host using dynamic address/port number assignment). 3.6.2. ASP Up Ack (UP ACK) The ASP Up Ack (UP ACK) message is used to acknowledge an ASP UP message received from a remote TUA peer. The ASP UP ACK message is formatted as follows: B. Bidulock Version 0.5 Page 51 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASP UP ACK message can contain the following parameters: Parameters ----------------------------------------- Info String Optional 3.6.3. ASP Down (DOWN) The ASP Down (DOWN) message is used to indicate to a remote TUA peer that the adaptation layer is not running. The ASP DOWN message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASP DOWN message can contain the following parameters: Parameters ----------------------------------------- Info String Optional 3.6.4. ASP Down Ack (DOWN ACK) The ASP Down Ack (DOWN ACK) message is used to acknowledge an ASP DOWN message received from a remote TUA peer. The ASP DOWN ACK message is formatted as follows: B. Bidulock Version 0.5 Page 52 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASP DOWN ACK message can contain the following parameters: Parameters ----------------------------------------- Info String Optional Note: The ASP DOWN ACK message will always be sent to acknowledge an ASP DOWN message. 3.6.5. Heartbeat (BEAT) The Heartbeat (BEAT) message is optionally used to ensure that the TUA peers are still available to each other. The BEAT message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0009 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Heartbeat Data / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The BEAT message can contain the following parameters: Parameters ----------------------------------------- Heartbeat Data Optional 3.6.6. Heartbeat Ack (BEAT ACK) The Heartbeat ACK (BEAT ACK) message is sent in response to a BEAT message. A peer MUST send a BEAT ACK in response to a BEAT message. It includes all the parameters of the received BEAT message, without any change. B. Bidulock Version 0.5 Page 53 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The BEAT ACK message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0009 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Heartbeat Data / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The BEAT ACK message can contain the following parameters: Parameters ----------------------------------------- Heartbeat Data Optional 3.7. Application Server Process Traffic Maintenance (ASPTM) Messages 3.7.1. ASP Active (ASPAC) The ASP Active (ASPAC) message is sent by an ASP to indicate to a remote TUA peer that it is Active and ready to process signalling traffic for a particular Application Server. The ASPAC message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x000B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Traffic Mode Type | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 54 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The ASPAC message can contain the following parameters: Parameters --------------------------------------------- Routing Context Conditional *1 Traffic Mode Type Optional *2 Info String Optional Note 1: When an ASP is registered or configured for multiple AS with an SG, the Routing Context associated with the AS whose activation is being requested MUST be placed in the ASPAC message. Note 2: The Traffic Mode Type parameter is not necessary in the ASPAC message when both peers are aware of the traffic mode of the AS by configuration or registration. 3.7.2. ASP Active Ack (ASPAC ACK) The ASP Active Ack (ASPAC) Ack message is used to acknowledge an ASPAC message received from a remote TUA peer. The ASPAC ACK message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x000B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Traffic Mode Type | +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASPAC ACK message can contain the following parameters: Parameters --------------------------------------------- B. Bidulock Version 0.5 Page 55 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Routing Context Conditional *1 Traffic Mode Type Optional Info String Optional Note 1: When an ASP is registered or configured for multiple AS with an SG, the Routing Context associated with the AS whose activation is being acknowledged MUST be placed in the ASPAC ACK message. 3.7.3. ASP Inactive (ASPIA) The ASP Inactive (ASPIA) message is sent by an ASP to indicate to a remote TUA peer that it is no longer processing signalling traffic within a particular Application Server. The ASPIA message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / INFO String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASPIA message can contain the following parameters: Parameters --------------------------------------------- Routing Context Conditional *1 INFO String Optional Note 1: When an ASP is registered or configured for multiple AS with an SG, the Routing Context associated with the AS whose deactivation is being requested MUST be placed in the ASPIA message. 3.7.4. ASP Inactive Ack (ASPIA ACK) The ASP Inactive Ack (ASPIA ACK) message is used to acknowledge an ASPIA message received from a remote TUA peer. B. Bidulock Version 0.5 Page 56 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The ASPIA message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / INFO String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASPIA message can contain the following parameters: Parameters --------------------------------------------- Routing Context Conditional *1 INFO String Optional Note 1: When an ASP is registered or configured for multiple AS with an SG, the Routing Context associated with the AS whose deactivation is being acknowledged MUST be placed in the ASPIA ACK message. 3.8. Management (MGMT) Messages 3.8.1. Error (ERR) The Error (ERR) message is used by a TUA peer to indicate an error situation. ERR messages MUST NOT be generated in response to other ERR messages. The ERR message is formatted as follows: B. Bidulock Version 0.5 Page 57 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x000C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Error Code | +-------------------------------+-------------------------------+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0012 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Affected Point Code / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Subsystem Number | +-------------------------------+-------------------------------+ | Tag = 0x041D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Network Appearance | +-------------------------------+-------------------------------+ | Tag = 0x0007 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Diagnostic Info / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ERR message can contain the following parameters: Parameters --------------------------------------------- Error Code Mandatory Routing Context Conditional *1 Affected Point Code Conditional *2 Subsystem Number Conditional *3 Network Appearance Conditional *4 Diagnostic Info Conditional *5 Note 1: When the Error Code is "Invalid Routing Context," the Routing Context parameter MUST contain the invalid routing context value(s). B. Bidulock Version 0.5 Page 58 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Note 2: When the Error Code is "Destination Status Unknown" or "Subsystem Status Unknown," the Affected Point Code parameter MUST contain the point codes for which status is unknown or unauthorized. Note 3: When the Error Code is "Subsystem Status Unknown," the Subsystem Number parameter MUST contain the subsystem for which status is unknown or unauthorized. Note 4: When the Error Code is "Invalid Network Appearance," the Network Appearance parameter MUST contains the invalid network appearance value. Note 5: The Diagnostic Info parameter SHOULD contain at least the first 40 bytes of the message that caused the ERR message to be sent. 3.8.2. Notify (NTFY) The Notify message is used to provide an autonomous indication of TUA events at an SG or IPSP to an ASP. The NTFY message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x000D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Status | +-------------------------------+-------------------------------+ | Tag = 0x0011 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | ASP Identifier | +-------------------------------+------------------------------- | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The NTFY message can contain the following parameters: B. Bidulock Version 0.5 Page 59 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters --------------------------------------------- Status Mandatory ASP Identifier Conditional *1 Routing Context Conditional *2 Info String Optional Note 1: ASP Identifier MUST be used where the IPSP/SGP cannot identify the ASP by pre-configured address/port number information (e.g, where an ASP is resident on a Host using dynamic address/port number assignment) and the Status parameter is set to "Alternate ASP Active" or "ASP Failure". Note 2: When an ASP is registered or configured for multiple AS with an SG, to identify the Application Server, the Routing Context associated with the AS whose state is being notified MUST be placed in the NTFY message when the Status parameter is set to "AS_State_Change". 3.9. Routing Key Management (RKM) Messages Routing Key Management (RKM) messages are used to manage the Routing Keys that are used by an SG to direct traffic toward an Application Server. 3.9.1. Registration Request (REG REQ) The Registration Request (REG REQ) message is sent by an ASP to indicate to a remote TUA peer that it wishes to register one or more given Routing Keys with the remote peer. Typically, an ASP would send this message to an SGP, and expects to receive a REG RSP message in return with an associated Routing Context value. The REG REQ message is formatted as follows: B. Bidulock Version 0.5 Page 60 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Key 1 / \ \ +-------------------------------+-------------------------------+ \ \ / ... / \ \ +-------------------------------+-------------------------------+ | Tag = 0x041E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Key n / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The REG REQ message can contain the following parameters: Parameters ------------------------------------------- Routing Key Mandatory *1 Note 1: One or more Routing Key parameters MAY be included in a single REG REQ message. Whereas it is OPTIONAL for an implementation to be able to generate a REG REQ message with more than one Routing Key parameter, it is REQUIRED that the implementation be able to receive multiple Routing Key parameters in a single REG REQ message. 3.9.2. Registration Response (REG RSP) The Registration Response (REG RSP) message is sent by an SG to an ASP to indicate the result of a previous REG REQ from an ASP. When successful, the REG RSP message contains the Routing Context assigned to the one or more Routing Keys that were presented in the REG REQ message. The REG RSP message is formatted as follows: B. Bidulock Version 0.5 Page 61 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0014 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Registration Result 1 / \ \ +-------------------------------+-------------------------------+ \ \ / ... / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0014 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Registration Result n / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The REG RSP message can contain the following parameters: Parameters ------------------------------------------- Registration Result Mandatory *1 Note 1: REG RSP message. Whereas it is OPTIONAL for an implementation to be able to generate a REG RSP message with more than one Routing Key parameter, it is REQUIRED that the implementation be able to receive multiple Routing Key parameters in a single REG RSP message. 3.9.3. Deregistration Request (DEREG REQ) The Deregistration Request (DEREG REQ) message is sent by an ASP to indicate to a remote TUA peer that it wishes to deregister a given Routing Key as identified by the given Routing Context. Typically, an ASP would send this message to an SGP, and expects to receive a DEREG RSP message in return with the associated Routing Context value. The DEREG REQ message is formatted as follows: B. Bidulock Version 0.5 Page 62 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The DEREG REQ message contains the following parameters: Parameters ------------------------------------------- Routing Context Mandatory *1 Note 1: One or more Routing Context values MAY be included in the Routing Context parameter. Whereas it is OPTIONAL for an implementation to be able to generate a DEREG REQ message with multiple Routing Context values in the Routing Context parameter, it is REQUIRED that an implementation be able to receive multiple Routing Context values in the Routing Context parameter of the DEREG REQ message. 3.9.4. Deregistration Response (DEREG RSP) The Deregistration Response (DEREG RSP) message is used as a response to the DEREG REQ message from a remote TUA peer. The DEREG REQ message is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0015 | Length = 12 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Deregistration Result 1 / \ \ +-------------------------------+-------------------------------+ \ \ / ... / \ \ +-------------------------------+-------------------------------+ | Tag = 0x0015 | Length = 12 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Deregistration Result n / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 63 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The DEREG REQ message contains the following parameters: Parameters ------------------------------------------- Deregistration Result Mandatory *1 Note 1: One or more Deregistration Result parameters MAY be included in one DEREG RSP message. Whereas it is OPTIONAL for an implementation to be able to generate a DEREG RSP message with multiple Deregistration Result parameters, it is REQUIRED that an implementation be able to receive multiple Deregistration Result parameters in a single DEREG RSP message. 3.10. Common Parameters These TLV parameters are common across the different adaptation layers: Parameter Name Parameter ID Section ----------------------------------------------------- Reserved 0x0000 - Not used in TUA 0x0001 - Not used in TUA 0x0002 - Not used in TUA 0x0003 - Info String 0x0004 3.10.1 Not used in TUA 0x0005 - Routing Context 0x0006 3.10.2 Diagnostic Info 0x0007 3.10.3 Not used in TUA 0x0008 - Heartbeat Data 0x0009 3.10.4 Not used in TUA 0x000A - Traffic Mode Type 0x000B 3.10.5 Error Code 0x000C 3.10.6 Status 0x000D 3.10.7 Not used in TUA 0x000E - Not used in TUA 0x000F - Not used in TUA 0x0010 - ASP Identifier 0x0011 3.10.8 Affected Point Code 0x0012 3.10.9 Correlation Id 0x0013 3.10.10 Registration Result 0x0014 3.10.11 Deregistration Result 0x0015 3.10.12 Registration Status 0x0016 3.10.13 Deregistration Status 0x0017 3.10.14 Local Routing Key Identifier 0x0018 3.10.15 3.10.1. Info String The Info String parameter is optionally included in all MGMT, ASPSM and ASPTM messages to provide additional debugging or diagnostic B. Bidulock Version 0.5 Page 64 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 information. The Info String parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0004 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Info String / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Info String parameter contains the following fields: Info String field: variable (ASCII string) The Info String field can carry any meaningful UTF-8 [STD63] character string along with the message. Length of the Info String field is from 0 to 255 characters. No procedures are presently identified for its use but implementations may use the Info String for debugging purposes. 3.10.2. Routing Context The Routing Context parameter is included in all TUA SSNM, DH and CH messages as well as in MGMT, ASPTM, ASPSM that reference one or more Application Servers. The Routing Context parameter is used to uniquely identify an Application Server and Routing Key within an association between an SGP and ASP. The Routing Context parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0006 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Routing Context(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Routing Context parameter can contain the following fields: Routing Context field: list of 32-bit (unsigned integer) The Routing Context field contains (a list of) 32-bit unsigned integers indexing the Application Server traffic that the sending ASP is configured or registered to receive. There is one-to-one B. Bidulock Version 0.5 Page 65 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 relationship between a Routing Context value, an SG Routing Key and an Application Server <2>. If the Routing Context parameter is present, it SHOULD be the first parameter in the message as it defines the format and/or interpretation of the parameters containing a PC or SSN value. 3.10.3. Diagnostic Information The Diagnostic Info parameter is used in the MGMT )Error (ERR) message to provide additional information concerning the message that generated an ERR message reply. The Diagnostic Info parameter SHOULD contain at least the first 40 bytes of the message that generated the error. The Diagnostic Info parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0007 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Diagnostic Info / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Diagnostic Info parameter contains the following fields: Diagnostic Info field: variable length (bytes) The Diagnostic Info field can contain any information germane to the error condition, to assist in the identification of the error condition. The Diagnostic Info SHOULD be the first 40 bytes of the offending message. 3.10.4. Heartbeat Data The Heartbeat Data parameter is used in the BEAT and BEAT ACK messages and contains whatever information the sender of the BEAT message chooses to include. Some uses for the Heartbeat Data parameter are described in Section 4. The Heartbeat Data parameter is formatted as follows: B. Bidulock Version 0.5 Page 66 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0009 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Heartbeat Data / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Heartbeat Data parameter contains the following fields: Heartbeat Data field: variable length (opaque) The sending node defines the Heartbeat Data field contents. It may include a Heartbeat Sequence Number or Time-stamp, or other implementation specific details. The receiver of a Heartbeat (BEAT) message does not process this field as it is only of significance to the sender. The receiver MUST echo the content of the Heartbeat Data in a BEAT ACK message. The data field can be used to store information in the Heartbeat (BEAT) message useful to the sending node (e.g. the data field can contain a time stamp, a sequence number, etc.). 3.10.5. Traffic Mode Type The Traffic Mode Type parameter indicates the fail-over and traffic distribution algorithm and procedures that will be used for an Application Server Process serving an Application Server. Each Application Server has associated with it only one Traffic Mode Type. The Traffic Mode Type parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x000B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Traffic Mode Type | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Traffic Mode Type parameter contains the following fields: Traffic Mode Type field: 32-bits (unsigned integer) The Traffic Mode Type field identifies the traffic mode of operation of an ASP within an AS. The valid values for the Traffic Mode Type field are as follows: B. Bidulock Version 0.5 Page 67 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 1 Override 2 Load-share 3 Broadcast Within a Routing Context, Override, Load-share Types and Broadcast cannot be mixed. The Override value indicates that the ASP is operating in Override mode, and that when the ASP becomes active for the Application Server, it will take over all traffic for the AS (i.e, primary/back-up operation), overriding any currently active ASP in the AS. In Load-share mode, when the ASP becomes active for the AS, the ASP will share in the traffic distribution with any other active ASPs. In Broadcast mode, when the ASP becomes active for the AS, the ASP will receive the same traffic as any other active ASPs. 3.10.6. Error Code The Error Code parameter is used in the Error (ERR) message to indicate the reason that the ERR message was generated and, along with the other parameters in the ERR message, help to locate the problem that generated the error condition. The Error Code parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x000C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Error Code | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Error Code parameter contains the following fields: Error Code field: 32-bit (unsigned integer) The Error Code field indicates the reason for the Error Message. The Error Code field value can be one of the following values: 1 Invalid Version 3 Unsupported Message Class 4 Unsupported Message Type 5 Unsupported Traffic Handling Mode 6 Unexpected Message 7 Protocol Error 9 Invalid Stream Identifier B. Bidulock Version 0.5 Page 68 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 13 Refused - Management Blocking 14 ASP Identifier Required 15 Invalid ASP Identifier 17 Invalid Parameter Value 18 Parameter Field Error 19 Unexpected Parameter 20 Destination Status Unknown 21 Invalid Network Appearance 22 Missing Parameter 25 Invalid Routing Context 26 No Configured AS for ASP 27 Subsystem Status Unknown The "Invalid Version" error is sent if a message was received with an invalid or unsupported version. The ERR message contains the supported version in the Common header. The ERR message could optionally provide the supported version in the Diagnostic parameter. The "Unsupported Message Class" error is sent if a message with an unexpected or unsupported Message Class is received. The "Unsupported Message Type" error is sent if a message with an unexpected or unsupported Message Type is received. The "Unsupported Traffic Handling Mode" error is sent by a SGP if an ASP sends an ASP Active (ASPAC) message with an unsupported Traffic Mode Type or a Traffic Mode Type that is inconsistent with the presently configured mode for the Application Server. An example would be a case in which the SGP did not support load-sharing. The "Unexpected Message" error MAY be sent if a defined and recognized message is received that is not expected in the current state (in some cases the ASP may optionally silently discard the message and not send an ERR message). For example, silent discard is used by an ASP if it received a TUA CH or DH message from an SGP while it was in the ASP-INACTIVE state. If the Unexpected message contained Routing Context(s), the Routing Context(s) SHOULD be included in the ERR message. The "Protocol Error" error is sent for any protocol anomaly (i.e., reception of a parameter that is syntactically correct but unexpected in the current situation. The "Invalid Stream Identifier" error is sent if a message is received on an unexpected SCTP stream (e.g, a Management message was received on a stream other than "0", or a TUA DH or CH message was received on stream "0"). The "Refused - Management Blocking" error is sent when an ASP Up (ASPUP) or ASP Active (ASPAC) message is received and the request is refused for management reasons (e.g, management lockout"). If this B. Bidulock Version 0.5 Page 69 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 error is in response to an ASP Active (ASPAC) message, the Routing Context(s) in the ASP Active (ASPAC) message SHOULD be included in the ERR message. The "ASP Identifier Required" is sent by a SGP in response to an ASP Up (ASPUP) message which does not contain an ASP Identifier parameter when the SGP requires one. The ASP SHOULD resend the ASP Up (ASPUP) message with an ASP Identifier. The "Invalid ASP Identifier" is send by a SGP in response to an ASP Up (ASPUP) message with an invalid (i.e., non-unique) ASP Identifier. The "Invalid Parameter Value" error is sent if a message is received with an invalid parameter value (e.g, a DUPU message was received with a Mask value other than "0"). The "Parameter Field Error" would be sent if a message is received with a parameter having a wrong length field. The "Unexpected Parameter" error would be sent if a message contains an invalid parameter. The "Destination Status Unknown" Error MAY be sent if a DAUD is received at an SG inquiring of the availability or congestion status of a destination, and the SG does not wish to provide the status (e.g, the sender is not authorized to know the status). For this error, the invalid or unauthorized Point Code(s) MUST be included along with any Network Appearance or Routing Context associated with the Point Code(s) from the DAUD message. The "Invalid Network Appearance" error is sent by a SGP if an ASP sends a message with an invalid (not configured) Network Appearance value. For this error, the invalid (not configured) Network Appearance MUST be included in the Network Appearance parameter in the ERR message. The "Missing Parameter" error is sent if a mandatory parameter was not included in a message. The "Invalid Routing Context" error is sent if a message is received from a peer with an invalid (not configured) Routing Context value, or if a message is received from a peer without a Routing Context parameter and it is not known by configuration data which Application Servers are referenced. For this error, the invalid Routing Context(s) MUST be included in the ERR message. The "No Configured AS for ASP" error is sent if a message is received from a peer without a Routing Context parameter and it is not known by configuration data which Application Servers are referenced. The "Subsystem Status Unknown" Error MAY be sent if a DAUD is received at an SG inquiring of the availability or congestion status of a subsystem, and the SG does not wish to provide the status (e.g, B. Bidulock Version 0.5 Page 70 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 the sender is not authorized to know the status). For this error, the invalid or unauthorized Point Code and Subsystem Number MUST be included along with any Network Appearance or Routing Context associated with the Point Code and Subsystem Number from the DAUD message. 3.10.7. Status The Status parameter identifies the type of the status that is being notified in a Notify (NTFY) message and the Status ID. The Status parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x000D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Status Type | Status ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Status parameter contains the following fields: Status Type field: 16-bits (unsigned integer) The valid values for Status Type field are as follows: 1 Application Server state change (AS_State_Change) 2 Other Status ID field: 16-bits (unsigned integer) The Status ID parameter contains more detailed information for the notification, based on the value of the Status Type. (1) If the Status Type is "AS_State_Change", then the Status ID values are as follows: 1 reserved 2 Application Server Inactive (AS-Inactive) 3 Application Server Active (AS-Active) 4 Application Server Pending (AS-Pending) These notifications are sent from an SGP to an ASP upon a change in status of a particular Application Server. The value reflects the new state of the Application Server. (2) If the Status Type is "Other", then the following Status Information values are defined: B. Bidulock Version 0.5 Page 71 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 1 Insufficient ASP resources active in AS 2 Alternate ASP Active 3 ASP failure These notifications are not based on the SGP reporting the state change of an ASP or AS. In the Insufficient ASP Resources case, the SGP is indicating to an "Inactive" ASP(s) in the AS that another ASP is required to handle the load of the AS (Load-sharing mode or Broadcast mode). For the Alternate ASP Active case, an ASP is informed when an alternate ASP transitions to the ASP-Active state in Override mode. 3.10.8. ASP Identifier The ASP Identifier parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0011 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | ASP Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The ASP Identifier parameter contains the following fields: ASP Identifier field: 32-bits (unsigned integer) The ASP Identifier field contains a unique value that is locally significant among the ASPs that support an AS. The SGP should save the ASP Identifier to be used, if necessary, with the Notify (NTFY) message (see Section 3.7.2). 3.10.9. Affected Point Code The Affected Point Code parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0012 | Length | +- - - - - - - -+- - - - - - - -+- - - - - - - - - - - - - - - -+ | Mask | Affected Point Code 1 | +- - - - - - - -+- - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / ... / \ \ +- - - - - - - -+- - - - - - - - - - - - - - - - - - - - - - - -+ | Mask | Affected Point Code n | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 72 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Affected Point Code parameter contains the following fields: Affected Destination Point Code field: n x 32-bits The Affected Point Code parameter contains a list of one or more Affected Destination Point Code fields. It is OPTIONAL to generate an Affected Point Code parameter with more than one Affected Destination Point Code field, but it is REQUIRED to accept it. Each Affected Destination Point Code field in the list contains the following fields: Affected Point Code field: 24-bits (unsigned integer) Each Affected Point Code field is a three-octet field to allow for up to 24-bit binary formatted SS7 Point Codes. Affected Point Codes that are less than 24-bits are padded on the left to the 24-bit boundary. The following examples show ANSI and ITU-T point codes: ANSI 24-bit Point Code: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Mask | Network | Cluster | Member | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |MSB-----------------------------------------LSB| ITU-T 14-bit Point Code: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Mask |0 0 0 0 0 0 0 0 0 0|Zone | Region | SP | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |MSB---------------------LSB| It is OPTIONAL for an implementation to generate an Affected Point Code parameter with more than one Affected Point Code field; but, the implementation MUST accept and process the Affected Point Code parameter with more than on Affected Point Code field. Mask field: 8-bits (unsigned integer) The Mask parameter can be used to identify a contiguous range of Affected Point Codes, independent of the point code format. Identifying a contiguous range of Affected Point Codes may be useful when a management event simultaneously affects the status of a series of destinations at an SG. B. Bidulock Version 0.5 Page 73 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Mask parameter is an integer representing a bit mask that can be applied to the related Affected PC field. The bit mask identifies how many bits of the Affected PC field are significant and which are effectively "wild-carded". For example, a mask of "8" indicates that the last eight bits of the PC is "wild-carded". For an ANSI 24-bit Affected PC, this is equivalent to signalling that all PCs in an ANSI Cluster are unavailable. A mask of "3" indicates that the last 3 bits of the PC is "wild-carded". For a 14-bit ITU Affected PC, this is equivalent to signalling that an ITU Region is unavailable. A Mask value equal (or greater than) the number of bits in the Point Code indicates that the entire network access is affected: this is used to indicate network isolation to the ASP. 3.10.10. Correlation Id The Correlation Id parameter is used to tag messages sent to an ASP in a Broadcast group as well as during fail-over. The Correlation Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0013 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Correlation Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Correlation Id parameter can contain the following fields: Correlation Id field: 32-bits (unsigned integer) The Correlation Id field contains a Correlation Id. The Correlation Id is a 32-bit identifier that is attached to the TUA Message Header to indicate to a newly entering ASP in a Broadcast AS where in the traffic flow of TUA messages the ASP is joining. It is attached to the TUA Message Header of the first DH or CH message sent to an ASP by an SG after sending an ASP Active Ack or otherwise starting traffic to an ASP. The Correlation Id is only significant within a Routing Context <3>. 3.10.11. Registration Result The Registration Result parameter is used to indicate the result of a successful or unsuccessful registration operation for a specific Routing Key. The Registration Result parameter is formatted as follows: B. Bidulock Version 0.5 Page 74 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0018 | Length | +-------------------------------+-------------------------------+ | Local Routing Key Identifier | +---------------------------------------------------------------+ | Registration Status | +---------------------------------------------------------------+ | Routing Context | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Registration Result parameter can contain the following fields: Local Routing Key Identifier: TLV The Local Routing Key Identifier field is mandatory in the Registration Result parameter. The Local Routing Key Identifier field contains the same TLV formatted parameter value as found in the corresponding Routing Key parameter in the Registration Request (REG REQ) message. Registration Status: TLV The Registration Status field is mandatory in the Registration Result parameter. The Registration Status field indicates the success or reason for failure of the corresponding registration request. For details on the format of the Registration Status parameter, see Section 3.10.13. Routing Context: TLV The Routing Context field is mandatory in the Registration Result parameter. The Routing Context field contains the TLV formatted Routing Context parameter for the associated Routing Key if the registration was successful. If the registration was not successful, it is set to zero (0). 3.10.12. Deregistration Result The Deregistration Result parameter is used to indicate the result of a successful or unsuccessful deregistration operation for a specific Routing Key. The Deregistration Result parameter is formatted as follows: B. Bidulock Version 0.5 Page 75 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0015 | Length | +-------------------------------+-------------------------------+ | Routing Context | +---------------------------------------------------------------+ | Deregistration Status | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Deregistration Result parameter can contain the following fields: Routing Context: TLV The Routing Context field is mandatory in the Deregistration Result parameter. The Routing Context field contains the same TLV formatted Routing Context parameter as found in the corresponding Deregistration Request (DEREG REQ) message. Deregistration Status: TLV The Deregistration Status field is mandatory in the Deregistration Result parameter. The Deregistration Status field indicates the success or reason for failure of the corresponding deregistration request. For details on the format of the Deregistration Status parameter, see Section 3.10.14. 3.10.13. Registration Status The Registration Status parameter is used to indicate the success or failure of a registration operation. The Registration Status parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0016 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Registration Status | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Registration Status parameter can contain the following fields: Registration Status: 32-bits (unsigned integer) The Registration Status field indicates the success or the reason for failure of a registration request. Its values can be: B. Bidulock Version 0.5 Page 76 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 Successfully Registered 1 Error - Unknown 2 Error - Invalid Destination Address 3 Error - Invalid Network Appearance 4 Error - Invalid Routing Key 5 Error - Permission Denied 6 Error - Cannot Support Unique Routing 7 Error - Routing Key not Currently Provisioned 8 Error - Insufficient Resources 9 Error - Unsupported RK parameter Field 10 Error - Unsupported/Invalid Traffic Mode Type 11 Error - Routing Key Change Refused 3.10.14. Deregistration Status The Deregistration Status parameter is used to indicate the success or failure of a deregistration operation. The Deregistration Status parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0017 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Deregistration Status | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Deregistration Status parameter can contain the following fields: Deregistration Status: 32-bits (unsigned integer) The Deregistration Status field indicates the success or the reason for failure of a deregistration request. Its values can be: 0 Successfully Deregistered 1 Error - Unknown 2 Error - Invalid Routing Context 3 Error - Permission Denied 4 Error - Not Registered 5 Error - ASP Currently Active for Routing Context 3.10.15. Local Routing Key Identifier The Local Routing Key Identifier parameter is used for correlating the Routing Key parameter in a specific Registration Request (REG REQ) message with the Registration Result parameter in the corresponding B. Bidulock Version 0.5 Page 77 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Registration Response (REG RSP) message. The Local Routing Key Identifier parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0018 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Local Routing Key Identifier | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Local Routing Key Identifier parameter can contain the following fields: Local Routing Key Identifier: 32-bits (unsigned integer) The Local Routing Key Identifier value is assigned by the ASP and is used to correlate the response in a Registration Response (REG RSP) message with the original registration request from the Registration Request (REG REQ) message. The Local Routing Key Identifier value must remain unique until the REG RSP message is received. 3.11. TUA-Specific parameters These TLV parameters are specific to the TUA protocol: Parameters used in DH Messages -------------------------------------------------- Parameter Name Parameter ID Section -------------------------------------------------- Dialogue Id 0x0401 3.11.1.1 Dialogue Flags 0x0402 3.11.1.2 Quality of Service 0x0403 3.11.1.3 Destination Address 0x0404 3.11.1.4 Originating Address 0x0405 3.11.1.5 Application Context Name 0x0406 3.11.1.6 User Information 0x0407 3.11.1.7 Security Context 0x0408 3.11.1.8 Confidentiality 0x0409 3.11.1.9 Termination 0x040A 3.11.1.10 Abort Cause 0x040B 3.11.1.11 Report Cause 0x040C 3.11.1.12 Abort Reason 0x040D 3.11.1.13 Components 0x040E 3.11.1.14 Component 0x040F 3.11.1.15 Transaction Id 0x0410 3.11.1.16 -------------------------------------------------- B. Bidulock Version 0.5 Page 78 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Parameters used in CH Messages ---------------------------------------- Parameter Name Parameter ID Section ---------------------------------------- Invoke Id 0x0411 3.11.2.1 Linked Id 0x0412 3.11.2.2 Component Flags 0x0413 3.11.2.3 Operation 0x0414 3.11.2.4 Parameters 0x0415 3.11.2.5 Error 0x0416 3.11.2.6 Problem Code 0x0417 3.11.2.7 Timeout 0x0418 3.11.2.8 ---------------------------------------- Other Parameters ---------------------------------------------------------- Parameter Name Parameter ID Section ---------------------------------------------------------- Subsystem Number 0x0419 3.11.3.1 Subsystem Multiplicity Indicator 0x041A 3.11.3.2 Congestion Level 0x041B 3.11.3.3 User/Cause 0x041C 3.11.3.4 Network Appearance 0x041D 3.11.3.5 Routing Key 0x041E 3.11.3.6 Address Range 0x041F 3.11.3.7 Destination Transaction Id 0x0420 3.11.3.8 Originating Transaction Id 0x0421 3.11.3.9 Transaction Id Range 0x0422 3.11.3.10 Global Title 0x0423 3.11.3.11 Point Code 0x0424 3.11.3.12 ---------------------------------------------------------- 3.11.1. Parameters used in DH Messages 3.11.1.1. Dialogue Id The Dialogue Id parameter is used in the TUA Message Header to identify the dialogue within the Application Server indicated by the Routing Context (also in the TUA Message Header). The Dialogue Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0401 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Dialogue Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 79 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Dialogue Id parameter contains the following fields: Dialogue Id field: 32-bits (unsigned integer) The Dialogue Id field contains an identifier that is used both at the SG and the ASP to identify a dialogue within an Application Server. The Dialogue Id value must be unique within the scope of a given Application Server and Routing Context. For a given AS and Routing Context, either the SG or the ASP is responsible for assigning Dialogue Ids, but not both. 3.11.1.2. Dialogue Flags The Dialogue Flags parameter is used in the DH Message Header and is used to indicate whether components are present (when the message is sent from SG to ASP) and whether permission is granted for the receiving TC-User to terminate the dialogue. The Dialogue Flags parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0402 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Dialogue Flags | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Dialogue Flags parameter contains the following fields: Dialogue Flags field: 32-bits (bit field) The Dialogue Flags field contains flag bits used in to indicate additional characteristics of the DH message. The Dialogue Flags field is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | reserved |C|P| | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Bits 0-28: Reserved (coded zero) Reserved bits are reserved for later IETF extensions and are coded zero. Bit 29: Components Present B. Bidulock Version 0.5 Page 80 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Components Present bit is set in the indication (i.e, sent from SG to ASP) forms of Dialogue Handling (DH) messages to indicate that Component Handling (CH) messages will follow containing the components associated with the Dialogue Handing message. Bit 20: Permission The Permission bit is cleared in Dialogue Handling (DH) messages to indicate that the remote TC-User is not permitted to end the dialogue. Bit 31: Reserved (coded zero) Reserved bits are reserved for later IETF extensions and are coded zero. 3.11.1.3. Quality of Service The Quality of Service parameter contains the QoS parameters for the underlying SCCP Network Service. The Quality of Service parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0403 | Length = 8 | +- - - - - - - -+- - - - - - - -+- - - - - - - -+-+- - -+- - - -+ | Msg Priority | Importance | Seq Control |R| - | P Cls | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Quality of Service parameter contains the following fields: Protocol Class field: 4-bits (unsigned integer) The Protocol Class field indicates the SCCP Protocol Class requested by the TC-User for the current Dialogue Handling message. Valid values for the Protocol Class field are as follows: 0 SCCP Protocol Class 0 TCAP Operation Class 4 1 SCCP Protocol Class 1 TCAP Operation Class 1, 2, and 3 2 SCCP Protocol Class 2 TCAP Operation Class 1, 2, and 3 3 SCCP Protocol Class 3 TCAP Operation Class 1, 2, and 3 Spare field: 3-bits (coded zero) Spare bits are coded zero. B. Bidulock Version 0.5 Page 81 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Return Option field: 1-bit (boolean) Specifies whether the SCCP "return message on error" is requested when the Protocol Class field is set to SCCP Protocol Class 0 or 1. When the Protocol Class field is set to SCCP Protocol Class 2 or 3, this field MAY be ignored by the SG. The Return Option field has the following values: 0 No "Return On Error" option requested. 1 "Return On Error" option requested. Sequence Control field: 8-bits (unsigned integer) When the Protocol Class field is other than SCCP Protocol Class 0, the Sequence Control field provides a sequence control parameter which is used by the underlying SS7 SCCP and MTP layer at the SG to generate an SLS value. When the Protocol Class field is set to Protocol Class 0, this field SHOULD be coded to zero and MUST be ignored by the SG. Importance field: 8-bits (unsigned integer) The Importance field contains the SCCP Importance level requested by the TC-User. Where the underlying SCCP transport at an SG does not support SCCP flow control [Q.714], this field SHOULD be coded to zero and MUST be ignored by the SG <4>. Valid values for the Importance field are as follows: 0 SCCP Importance Level 0 or Unspecified 1 SCCP Importance Level 1 2 SCCP Importance Level 2 3 SCCP Importance Level 3 4 SCCP Importance Level 4 5 SCCP Importance Level 5 6 SCCP Importance Level 6 7 SCCP Importance Level 7 Message Priority field: 8-bits (unsigned integer) The Message Priority field contains the MTP Message Priority requested when the underlying SS7 transport at an SG supports multiple congestion levels [Q.704]. When the underlying transport does not support multiplex congestion levels or states, this field SHOULD be coded to zero and MUST be ignored by the SG <5>. Valid values for the Message Priority field are as follows: 0 Message Priority 0 or Unspecified 1 Message Priority 1 B. Bidulock Version 0.5 Page 82 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 2 Message Priority 2 3 Message Priority 3 3.11.1.4. Destination Address The Destination Address parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0404 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Address parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Destination Address parameter contains the following fields: Address field: variable length (address parameter list) The Address field contains a list of one or more address parameters. At least one address parameter MUST be present in the Address field. The Address field can contain the following parameters: Parameters --------------------------------------------- Point Code Conditional *1 Subsystem Number Conditional *1 Global Title Optional Note :1 When the Address field contains a Subsystem Number parameter, it must also contain a Point Code parameter. 3.11.1.5. Originating Address The Originating Address parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0405 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Address parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 83 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Originating Address parameter contains the following fields: Address field: variable length (address parameter list) The Address field contains a list of one or more address parameters. At least one address parameter MUST be present in the Address field. The Address field can contain the following parameters: Parameters --------------------------------------------- Point Code Conditional *1 Subsystem Number Conditional *1 Global Title Optional Note :1 When the Address field contains a Subsystem Number parameter, it must also contain a Point Code parameter. 3.11.1.6. Application Context Name The Application Context Name parameter contains the identifier of the application context proposed by the dialogue initiator or by the dialogue responder. An application context is an explicitly identified set of application-service-elements, related options and any other necessary information for the interworking of application- entities on a dialogue. For a description of the Application Context Name parameter, see the ITU [Q.771] TCAP specifications. The Application Context Name parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0406 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Application Id Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Application Identifier / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Application Context Name parameter contains the following fields: Application Id Type field: 32-bits (unsigned integer) B. Bidulock Version 0.5 Page 84 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Application Id Type field indicates the type of Application Identifier that is present in the Application Identifier field. Valid values for the Application Id Type are as follows: 0 ASN.1 OBJECT IDENTIFIER 1 ASN.1 INTEGER Application Identifier field: variable length (bytes) The Application Identifier contains an identifier of the application context that is being proposed by the dialogue initiator or responder. When the Application Type is `0' this field MUST be formatted as an OBJECT IDENTIFIER [X.681] representing the proposed Application Id. When the Application Type is `1' this field MUST be formatted as 32-bit unsigned integer value representing the proposed Application Id. 3.11.1.7. User Information The User Information parameter contains information which can be exchanged between TC-Users independently from the Remote Operation Service. For a description of the User Information parameter, see the ITU [Q.771] TCAP specifications. The User Information parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0407 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / User Information / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The User Information parameter can contain the following fields: User Information field: variable length (bytes) The internal format of the User Information field is opaque to TUA and to TCAP. The contents of this field is a string of bytes as they were provided to the TUA layer by the TC-User in a TC-BEGIN, TC-CONT, or TC-END primitive. B. Bidulock Version 0.5 Page 85 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.11.1.8. Security Context The Security Context parameter contains the identifier of the security context proposed by the dialogue initiator or by the dialogue responder. The Security Context parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0408 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Security Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Security Identifier / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Security Context parameter contains the following fields: Security Id Type field: 32-bits (unsigned integer) The Security Id Type field indicates the type of Security Identifier that is present in the Security Identifier field. Valid values for the Security Id Type are as follows: 0 ASN.1 OBJECT IDENTIFIER 1 ASN.1 INTEGER Security Identifier field: variable length (bytes) The Security Identifier contains an identifier of the application context that is being proposed by the dialogue initiator or responder. When the Security Type is `0' this field MUST be formatted as an OBJECT IDENTIFIER [X.681] representing the proposed Security Id. When the Security Type is `1' this field MUST be formatted as 32-bit unsigned integer value representing the proposed Security Id. 3.11.1.9. Confidentiality Confidentiality Identifier is coded context specific (in the context of the dialogue portion sequence), constructor. The Confidentiality parameter is formatted as follows: B. Bidulock Version 0.5 Page 86 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0409 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Confidentiality Id Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Confidentiality Identifier / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Confidentiality parameter contains the following fields: Confidentiality Id Type field: 32-bits (unsigned integer) The Confidentiality Id Type field indicates the type of Confidentiality Identifier that is present in the Confidentiality Identifier field. Valid values for the Confidentiality Id Type are as follows: 0 ASN.1 OBJECT IDENTIFIER 1 ASN.1 INTEGER Confidentiality Identifier field: variable length (bytes) The Confidentiality Identifier contains an identifier of the application context that is being proposed by the dialogue initiator or responder. When the Confidentiality Type is `0,' this field MUST be formatted as an OBJECT IDENTIFIER [X.681] representing the proposed Confidentiality Id. When the Confidentiality Type is `1,' this field MUST be formatted as 32-bit unsigned integer value representing the proposed Confidentiality Id. 3.11.1.10. Termination The Termination parameter indicates the dialogue termination scenario chosen by the TC-User (prearranged or basic). The Termination parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Termination | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 87 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Termination parameter contains the following fields: Termination field: 32-bit (unsigned integer) The Termination field indicates the dialogue termination scenario chosen by the TC-User and can have one of the following values: 0 Prearranged 1 Basic 3.11.1.11. Abort Cause The Abort Cause parameter is included in the TUAB, TPAB, TUAB and TPAB messages and indicates the reason for aborting the transaction or dialogue. The Abort Cause parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Abort Cause | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Abort Cause parameter contains the following fields: Abort Cause field: 32-bit (unsigned integer) The Abort Cause field indicates the reason for aborting the dialogue and has a TCAP protocol-variant-specific value. Example values for ITU [Q.773] and ANSI [T1.114] are as follows: B. Bidulock Version 0.5 Page 88 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 ITU-T Description ANSI Description ---+-------------------------------+------------------------------- 0 | unrecognized message type | - 1 | unrecognized transaction id | unrecognized package type 2 | badly formatted transaction | incorrect transaction portion | portion | 3 | incorrect transaction portion | badly structured transaction | | portion 4 | resource limitation | unassigned responding | | transaction identifier 5 | L_RESOURCE_LIMIT | permission to release problem 6 | invalid dialogue request | resource unavailable 7 | pending expired | unrecognized dialogue portion | | identifier 8 | begin expired | badly structured dialogue | | portion 9 | inactive expired | missing dialogue portion 10 | destination address unknown | inconsistent dialog portion 11 | network error | - 12 | unrecognized dialogue | - | identifier | 13 | abnormal dialogue portion | - 14 | no common dialogue portion | - 3.11.1.12. Report Cause The Report Cause parameter indicates the reason for the sending of an TNOT message and reflects the SCCP reason that would be used for returning a TCAP message. The Report Cause parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Report Cause | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Report Cause parameter contains the following fields: Report Cause field: 32-bit (unsigned integer) The Report Cause field indicates the reason that a TC-User message could not be delivered and has the following values: B. Bidulock Version 0.5 Page 89 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 no translation for an address of such nature 1 no translation for this specific address 2 subsystem congestion 3 subsystem failure 4 unequipped user 5 MTP failure 6 network congestion 7 SCCP unqualified 8 error in message transport 9 error in local processing 10 destination cannot perform re-assembly 11 SCCP failure 12 hop counter violation 13 segmentation not supported 14 segmentation failed. 3.11.1.13. Abort Reason The Abort Reason parameter indicates whether a dialogue is aborted because the received application context name is not supported and no alternative one can be proposed or because of any other user problem. The Abort Reason parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Abort Reason | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Abort Reason parameter contains the following fields: Abort Reason field: 32-bits (unsigned integer) The Abort Reason field indicates whether the dialogue was aborted because the received application context name is not supported and no alternative can be proposed or because of any other user problem. The valid values for Abort Reason are as follows: 0 application context not supported 1 user specific B. Bidulock Version 0.5 Page 90 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.11.1.14. Components The Components parameter is used to attach components directly to a TUA Dialogue Handling (DH) message instead of in separate Component Handling (CH) massages. The Components parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Tag = 0x040F | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Component #1 / \ \ +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ . \ / . / \ . \ / / +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Tag = 0x040F | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Component #n / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Components parameter contains the following parameters: Parameters --------------------------------------------- Component Conditional *1 Note 1: The Components parameter MUST contain at least one Component parameter, but may contain more than one Component parameter. 3.11.1.15. Component The Component Type field identifies the type of component (CINV, CRES, CCAN, etc.) that is contained within a Component parameter. The Component Type parameter is formatted as follows: B. Bidulock Version 0.5 Page 91 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x040F | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Component Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Component parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Component Type parameter contains the following fields: Component Type field: 32-bit (unsigned integer) The Component Type field indicates the type of component contained in the component parameter. It can take on the following values: (Note that not all values are supported for interworking with all TCAP protocol variants.) 0 Invoke Last 1 Invoke Not Last 2 Result Last 3 Result Not Last 4 Error 5 Reject (User) 6 Reject (Local) 7 Reject (Remote) 8 Cancel Component field: variable length (TLV parameter list) The Component field contains the parameters associated with the component. This field may contains the following components, however, the formatting of the Component field MUST be the same as for the corresponding TUA message as follows: Component Type CH Msg Section --------------------+------------------ 0 Invoke Last | --------------------+ CINV 3.4.2 1 Invoke Not Last | --------------------+------------------ 2 Result Last | --------------------+ CRES 3.4.3 3 Result Not Last | --------------------+------------------ B. Bidulock Version 0.5 Page 92 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 | 4 Error | CERR 3.4.4 --------------------+------------------ 5 Reject (User) | --------------------+ 6 Reject (Local) | CREJ 3.4.5 --------------------+ 7 Reject (Remote) | --------------------+------------------ 8 Cancel | CCAN 3.4.6 --------------------+------------------ 3.11.1.16. Transaction Id The Transaction Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0410 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Transaction Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Transaction Id parameter contains the following fields: Transaction Id field: 32-bits (unsigned integer) The Transaction Id field contains the value of the originating or terminating transaction identifier. 3.11.2. Parameters used in CH Messages 3.11.2.1. Invoke Id The Invoke Id parameter identifies an invoke component. This identifier is only significant within the scope of a transaction and need only uniquely identify a dialogue within a transaction in a given direction (e.g, from SGP to ASP). The value of the Invoke Id parameter is chosen by the TUA peer sending the Invoke. As both the ASP and SGP could be assigning the same values of Invoke Id to invocations in each direction, the Invoke Id need only be unique in one direction. The Invoke Id parameter is formatted as follows: B. Bidulock Version 0.5 Page 93 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0411 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Invoke Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Invoke Id parameter contains the following fields: Invoke Id field: 32-bit (unsigned integer) The Invoke Id field contains the value of the invoke identifier for the current component. 3.11.2.2. Linked Id The Linked Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0412 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Linked Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Linked Id parameter contains the following fields: Linked Id field: 32-bit (unsigned integer) The Linked Id field contains the value of the linked or correlation invoke identifier which is related to the current component. 3.11.2.3. Component Flags The Component Flags parameter is used in the CINV and CRES CH messages to indicate whether the contained components are segmented and whether they represent the last segment in a sequence of component segments. The Component Flags parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0413 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - -+-+ | unused |N| +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 94 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Component Flags parameter contains the following fields: Component Flags field: 32-bits The Component Flags field is used to convey information about the components in a Component Handling (CH) message. It contains the following bit fields: Bits 0-30: Unused These bits are reserved and are coded to zero. Bit 31: Not Last Bit The Not Last bit is used to indicate whether the component present in the CH message is the last component of a sequence of segmented components. It has the following values: 0 Last component in a component sequence. 1 Not the last component in a component sequence. To smoothly interwork with TCAP, TUA includes a mechanism whereby components can be segmented: the CH message with the "Not Last" bit set in the Component Flags field provides for the initial segments of a segmented component, whereas the CH message with the "Not Last" bit clear in the Component Flags field provides for the final (or only) segment in a sequence of component segments representing the complete component. When interworking with TCAP, each component segment may be sent in a different TCAP package [Q.775]. 3.11.2.4. Operation The Operation parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0414 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Operation Class | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ | Operation Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Operation Code / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 95 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Operation parameter contains the following fields: Operation Class field: 32-bit (unsigned integer) The Operation Class field indicates the operational class of the invoke in which it appears and has the following values: 0 not specified 1 Class 1 both success and failure are reported 2 Class 2 only failure is reported 3 Class 3 only success is reported 4 Class 4 neither success, nor failure is reported Operation Type field: 32-bit (unsigned integer) The Operation Type field indicates the type of operation code and has the following values: 1 National TCAP Operation INTEGER 2 Private TCAP Operation INTEGER 3 Local TCAP Operation INTEGER 4 Global TCAP Operation OBJECT IDENTIFIER Operation Code field: variable length (based on type) The Operation Code field contains an identifier of the requested operation. When the Operation Type is "National," "Private," or "Local," this field MUST be formatted as 32-bit unsigned integer value representing the requested operation. When the Operation Type is "Global," this field MUST be formatted as an OBJECT IDENTIFIER [X.681]. representing the requested operation. The value of this field is TCAP protocol-variant-specific. 3.11.2.5. Parameters The Parameters parameter identifies the parameter set or parameter sequence that accompanies an operation invocation or response. The Parameters parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0415 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Parameters / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 96 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Parameters parameter contains the following fields: Parameters field: variable length (bytes) The Parameters field contains all of the parameters coded according to the coding [X.681] for Parameter Sequences or Parameter Sets per the applicable TCAP protocol specification. For example, ITU [Q.773] or ANSI [T1.114]. <6> 3.11.2.6. Error The Error parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0416 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Error Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Error Code / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Error parameter contains the following fields: Error Type field: 32-bit (unsigned integer) The Error Type field indicates the level (i.e, local or global) at which the error was generated. It has the following values: 1 National TCAP Error INTEGER 2 Private TCAP Error INTEGER 3 Local TCAP Error INTEGER 4 Global TCAP Error OBJECT IDENTIFIER Error Code field: variable length (based on type) The Error Code field contains an identifier of the indicated error. When the Error Type is "National," "Private," or "Local," this field MUST be formatted as a 32-bit signed integer value representing the indicated error. When the Error Type is "Global," this field MUST be formatted as an OBJECT IDENTIFIER [X.681] representing the indicated error. The value of this field is TCAP protocol-variant- specific. B. Bidulock Version 0.5 Page 97 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.11.2.7. Problem Code The Problem Code parameters identifies the reason for rejecting a component. The Problem Code parameters is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0417 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Problem Type | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ | Problem Code | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Problem Code parameters contains the following fields: Problem Type field: 32-bit (unsigned integer) The Problem Type field indicates the reason for rejecting a component and has the following values: (Note that not all problem type field values are applicable to all TCAP protocol variants.) 0 General Problem 1 Problem with Invoke 2 Problem with Return Result 3 Problem with Return Error 4 Problem with Transaction Portion (deprecated) Problem Code field: variable length (signed integer) The Problem Code field indicates the specific problem associated with the Problem Type. For more information on problem codes, see Q.773 Chapter 4.2.2.6 and ANSI T1.114.3 Chapter 5.16.2. Problem Code field: 32-bit (signed integer) The Problem Code field indicates the specific problem associated with the Problem Type. This is a TCAP protocol-variant-specific value. Following are some example values for ITU [Q.773] and ANSI [T1.114]: | | | ITU | ANSI ----------+----------------------------+------------------------------ General 0 | unrecognized component | - Problem 1 | mis-typed component | unrecognized component type 2 | badly structured component | incorrect component portion B. Bidulock Version 0.5 Page 98 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 | | | ITU | ANSI ----------+----------------------------+------------------------------ 3 | - | badly structured component | | portion ----------+----------------------------+------------------------------ Invoke 0 | duplicate invoke id | - Problem 1 | unrecognized operation | duplicate invocation 2 | mis-typed parameter | unrecognized operation 3 | resource limitation | incorrect parameter 4 | initiating release | unrecognized correlation id 5 | unrecognized linked id | - 6 | linked response unexpected | - 7 | unexpected linked | - | operation | ----------+----------------------------+------------------------------ Return 0 | unrecognized invoke id | - Result 1 | return result unexpected | unrecognized correlation id Problem 2 | mis-typed parameter | unexpected return result 2 | - | incorrect parameter ----------+----------------------------+------------------------------ Return 0 | unrecognized invoke id | - Error 1 | return error unexpected | unexpected return error Problem 2 | unrecognized error | unrecognized error 3 | unexpected error | unexpected error 4 | mis-typed parameter | incorrect parameter ----------+----------------------------+------------------------------ Trans 1 | - | unrecognized package type Portion 2 | - | incorrect transaction | | portion Problem 3 | - | badly structured transaction | | portion (depr.) 4 | - | unassigned responding | | transaction id 5 | - | permission to release | | problem 6 | - | resource unavailable ----------+----------------------------+------------------------------ 3.11.2.8. Timeout The Timeout parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0418 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Timeout | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ B. Bidulock Version 0.5 Page 99 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Timeout parameter contains the following fields: Timeout field: 32-bit (unsigned integer) The Timeout field contains the timeout value in seconds that the sender will wait before an invocation is canceled. 3.11.3. Other Parameters 3.11.3.1. Subsystem Number The Subsystem Number parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0419 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Reserved | SSN | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Subsystem Number parameter contains the following fields: Reserved field: 24-bits (coded zero) Reserved bits are coded zero. SSN field: 8-bits (unsigned integer) The SSN field contains the SCCP subsystem number [T1.112], [Q.713]. 3.11.3.2. Subsystem Multiplicity Indicator The Subsystem Multiplicity Indicator is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041A | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Reserved | SMI | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Subsystem Multiplicity Indicator contains the following fields: Reserved field: 24-bits (coded zero) Reserved bits are coded zero. SMI field: 8-bits (unsigned integer) B. Bidulock Version 0.5 Page 100 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The SMI field contains the SCCP subsystem multiplicity indicator. Valid values for the SMI field are as follows: 0 Reserved/Unknown 1 Solitary 2 Duplicated 3 Triplicated 4 Quadruplicated ... ... 255 Unspecified 3.11.3.3. Congestion Level The Congestion Level parameter is used to indicate the MTP network congestion level or SCCP restricted importance level and is used in the Network Congestion (SCON) message. The Congestion Level parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041B | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Congestion Level | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Congestion Level parameter contains the following fields: Congestion Level field: 32-bits (unsigned integer) The Congestion Level field contains the level at which congestion has occurred. When the Congestion Level parameter is included in a SCON message that corresponds to an N-PCSTATE request indication primitive, the Congestion Level field indicates the MTP congestion level experienced by the local or affected signalling point as indicated by the Affected Point Code(s) also in the SCON message. In this case, valid values for the Congestion Level field are as follows: 0 No Congestion or Undefined 1 Congestion Level 1 2 Congestion Level 2 3 Congestion Level 3 When the Congestion Level parameter is included in a SCON message that corresponds to an N-STATE request or indication primitive, the Congestion Level field indicates the SCCP restricted importance B. Bidulock Version 0.5 Page 101 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 level experienced by the local or affected subsystem as indicated by the Affected Point Code and Subsystem Number also in the SCON message. In this case, valid values for the Congestion Level field range from 0 to 7, where 0 indicates the least congested and 7 indicates the most congested subsystem. 3.11.3.4. User/Cause The User/Cause parameter is used to report the affected user and the cause of the unavailability of the user in a DUPU message. The User/Cause parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041C | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Cause | User | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The User/Cause parameter contains the following fields: Cause field: 16-bits (unsigned integer) The Cause field indicates the cause of the unavailability of the remote user. Valid Cause values are as follows: 0 Unknown 1 Unequipped Remote User 2 Inaccessible Remote User User field: 16-bits (unsigned integer) The User field contains the SI value of the MTP User [Q.704] that is being reported unavailable. For TUA, this is the SI value of the SCCP (normally SI = 3). The TC-User MAY ignore the User field. 3.11.3.5. Network Appearance The Network Appearance parameter is used as a parameter in the Registration Request (REG REQ) message to indicate the network context in which the remainder of the Routing Key parameters are to be interpreted. The Network Appearance parameter is also used in the Error (ERR) message in response to a REG REQ message when a received Network Appearance parameter contains an invalid value. The Network Appearance parameter is formatted as follows: B. Bidulock Version 0.5 Page 102 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041D | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Network Appearance | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Network Appearance parameter can contain the following fields: Network Appearance field: 32-bits (unsigned integer) The Network Appearance field identifies the SS7 network context for the Routing Key. The Network Appearance value is of local significance only, coordinated between the SG and ASP. Therefore, in the case where the ASP is connected to more than one SG, the same SS7 Network context may be identified by a different Network Appearance value depending upon to which SG the ASP is registering. In the Routing Key, the Network Appearance identifies the SS7 Point Code and Global Title Transaction Type format used, and the SCCP, TCAP and TC-User protocol (type, variant and version) used within the specific SS7 network. 3.11.3.6. Routing Key The Routing Key parameter is used in the REG REQ message to list and identify the Routing Keys that are being registered. The Routing Key parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041E | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Local Routing Key Identifier | +- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -+ \ \ / Key parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Routing Key parameter can contain the following fields: Local Routing Key Identifier field: 32-bits (unsigned integer) The Local Routing Key Identifier field is used to uniquely identify the registration request. The identifier value is assigned by the ASP and is used to correlate the response in a REG RSP message with the original registration request. The identifier value must remain B. Bidulock Version 0.5 Page 103 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 unique until the REG RSP (or ERR) message is received. Key field: variable (TLV parameters) The key field can contain the following parameters: Parameters ---------------------------------------------- Network Appearance Conditional *1 Traffic Mode Type Optional Originating Address Optional Destination Address Optional Address Range Optional Originating Transaction Id Optional Destination Transaction Id Optional Transaction Id Range Optional Application Context Name Optional User Information Optional Note 1: The Network Appearance parameter MUST be included in the Routing Key when the ASP is able to register in multiple SS7 Network contexts. 3.11.3.7. Address Range The Address Range parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x041F | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Address Parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Address Range parameter can contain the following fields: Address field: variable (TLV parameters) The Address field can contain the following parameters: Parameters --------------------------------------------- Originating Address Conditional *1 Destination Address Conditional *1 B. Bidulock Version 0.5 Page 104 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Note 1: The Address field must contain pairs of Originating Addresses or Destination Addresses and MUST contain one and only one pair of addresses; but, MUST NOT mix Originating Addresses with Destination Addresses in the same Address field. 3.11.3.8. Destination Transaction Id The Destination Transaction Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0420 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Destination Transaction Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Destination Transaction Id parameter can contain the following fields: Destination Transaction Id field: 32-bits (unsigned integer) The Destination Transaction Id field contains the Destination Transaction Identifier associated with the dialogue. 3.11.3.9. Originating Transaction Id The Originating Transaction Id parameter is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0421 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Originating Transaction Id | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Originating Transaction Id parameter can contain the following fields: Originating Transaction Id field: 32-bits (unsigned integer) The Originating Transaction Id field contains the Originating Transaction Identifier associated with the dialogue. 3.11.3.10. Transaction Id Range The Transaction Id Range parameter is formatted as follows: B. Bidulock Version 0.5 Page 105 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0422 | Length | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ \ \ / Transaction Id Parameter(s) / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Transaction Id Range parameter can contains the following fields: Transaction Id field: list of 32-bit (unsigned integer) The Transaction Id field can contain the following parameters: Parameters ------------------------------------------- Originating Transaction Id Optional *1 Destination Transaction Id Optional *1 Note 1: The Transaction Id field must contain pairs of Originating Transaction Ids or Destination Transaction Ids and MUST contain one and only one pair of Transaction Id parameters; but, MUST NOT mix Originating Transaction Ids with Destination Transaction Ids in the same Transaction Id field. 3.11.3.11. Global Title The Global Title parameters is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0423 | Length | +- - - - - - - -+- - - - - - - -+- - - -+- - - -+- - - - - - - -+ | Num. Digits | Trans. Type | N Plan| E Sch | Nature of Add | +- - - - - - - -+- - - - - - - -+- - - -+- - - -+- - - - - - - -+ \ \ / Global Title Address / \ \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Global Title parameters contains the following fields: Number of Digits field: 8-bits (unsigned integer) B. Bidulock Version 0.5 Page 106 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The Number of Digits field contains the number of address signals that are represented in the Global Title Address field. Translation Type field: 8-bits (unsigned integer) The Translation Type field contains the translation type to be performed on the address information in the Global Title parameter. This is a TCAP protocol-variant-specific value. Example valid values for ITU [Q.713] are as follows: 0 unknown 1- 63 international services 128-254 national network specific Numbering Plan field: 4-bits (unsigned integer) The Numbering Plan field contains the numbering plan to which the address information contained in the Global Title Address field belongs. This is a TCAP protocol-variant-specific value. Example valid values for ITU [Q.713] are as follows: 0 unknown 1 ISDN/telephony numbering plan (E.163 and E.164) 2 generic numbering plan 3 data numbering plan (X.121) 4 telex numbering plan (F.69) 5 maritime mobile numbering plan (E.210, E.211) 6 land mobile numbering plan (E.212) 7 ISDN/mobile numbering plan (E.214) 14 private network or network-specific numbering plan Encoding Scheme field: 4-bits (unsigned integer) The Encoding Scheme field contains the format for the address information contained in the Global Title Address field. This is a TCAP protocol-variant-specific value. Example valid values for ITU [Q.713] are as follows: 0 unknown 1 BCD, odd number of digits 2 BCD, even number of digits 3 national specific Nature of Address field: 8-bits (unsigned integer) The Nature of Address field contains an indication of the nature of the information represented in the Global Title Address field. This is a TCAP protocol-variant-specific value. Example valid values for ITU [Q.713] are as follows: B. Bidulock Version 0.5 Page 107 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 0 unknown 1 subscriber number 2 reserved for national use 3 national significant number 4 international number Global Title Address field: variable length (bytes) The Global Title Digits field contains the global title address information. This information is formatted according to the Encoding Scheme, belongs to the Numbering Plan, has the Nature of Address, and contains the Number of Digits. When the encoding scheme is BCD, the Global Title Digits field is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Dig 2 | Dig 1 | Dig 4 | Dig 3 | Dig 6 | Dig 5 | Dig 8 | Dig 7 | +- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+ | Dig 10| Dig 9 | ... | ... | ... | ... | ... | ... | +- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+ \ . \ / . / \ . \ / / +- - - - - - - -+- - - -+- - - -+- - - -+- - - -+- - - -+- - - -+ | |filler | Dig n | ... | ... | ... | ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ Where each digit is coded as follows: 0x0 digit 0 0x1 digit 1 0x2 digit 2 0x3 digit 3 0x4 digit 4 0x5 digit 5 0x6 digit 6 0x7 digit 7 0x8 digit 8 0x9 digit 9 0xA spare 0xB code 11 0xC code 12 0xD spare 0xE spare 0xF ST When the Encoding Scheme is not "BCD," both the TUA layer at the ASP B. Bidulock Version 0.5 Page 108 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 and the TUA layer at the SG should treat the Global Title Address as opaque. 3.11.3.12. Point Code The Point Code parameters is formatted as follows: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Tag = 0x0424 | Length = 8 | +- - - - - - - - - - - - - - - -+- - - - - - - - - - - - - - - -+ | Point Code | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ The Point Code parameters contains the following fields: Point Code field: 32-bits (unsigned integer) The Point Code field contains an SS7 signalling point code. Point codes that are less than 32-bits are padded on the left to the 32-bit boundary. The following examples show ANSI and ITU-T point codes: ANSI 24-bit Point Code: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |0 0 0 0 0 0 0 0| Network | Cluster | Member | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |MSB-----------------------------------------LSB| ITU-T 14-bit Point Code: 0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0|Zone | Region | SP | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ |MSB---------------------LSB| B. Bidulock Version 0.5 Page 109 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Notes for Section 3 <1> IMPLEMENTATION NOTE:- The use of TLV in principle allows the parameters to be placed in a random order in the message. However, some guidelines should be considered for easy processing in the following order: + parameters needed to correctly process other message parameters, preferably should precede these parameters (such as Routing Context). + Mandatory parameters preferably SHOULD precede any optional parameters. + The data parameter will normally be the final one in the message. + The receiver SHOULD accept parameters in any order, except where explicitly mandated. <2> IMPLEMENTATION NOTE:- An Application Server Process may be configured to process traffic for more than one logical Application Server. From the perspective of an ASP, a Routing Context defines a range of signalling traffic that the ASP is currently configured to receive from the SG. Additionally, the Routing Context parameter identifies the SS7 network context for the message, for the purposes of logically separating the signalling traffic between the SGP and the Application Server Process over a common SCTP Association, when needed. An example is where an SGP is logically partitioned to appear as an element in several different national SS7 networks. It implicitly defines the SS7 Point Code format used, the SS7 Network Indicator value and TCAP protocol type/variant/version used within a separate SS7 network. It also defines the network context for the PC and SSN values. Where an SGP operates in the context of a single SS7 network, or individual SCTP associations are dedicated to each SS7 network context, this functionality is not needed. <3> IMPLEMENTATION NOTE:- Correlation Id parameter can be used for features like Synchronization of ASPs and SGPs in a Broadcast Mode AS or SG; avoid message duplication and mis-sequencing in case of fail-over of association from one ASP or SGP to another ASP or SGP, etc. For application of the Correlation Id parameter see CORID [CORID03]. <4> IMPLEMENTATION NOTE:- The value in the Importance field in the Quality of Service parameter MAY be ignored or modified by a Signalling Gateway if the value contained is not consistent with SCCP flow control policy at the SG. <5> IMPLEMENTATION NOTE:- The value in the Message Priority field in the Quality of Service parameter MAY be ignored or modified by a Signalling Gateway if the value contained is not consistent with MTP congestion policy at the SG. B. Bidulock Version 0.5 Page 110 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 IMPLEMENTATION NOTE:- The Signalling Gateway MAY, at its option, segment the Parameters field into multiple parameters set to be send in multiple Invoke (Last/Not Last) or Return Result (Last/Not Last) components in separate TCAP packages to meet the maximum PDU requirements imposed by the underlying SCCP transport. Otherwise, if the Signalling Gateway finds that the resulting component is too large to fit into an SCCP UNITDATA message [Q.713], the SG MAY, at its option, return a TNOT message indicating to the TC-User that the component was too large. 4. Procedures The TUA layer needs to respond to various local primitives it receives from other layers as well as the messages that it receives from the peer TUA layer. This section describes the TUA procedures in response to these events. 4.1. Procedures to Support the TC-User 4.1.1. Receipt of Primitives from the TC-User Upon receiving a TC request or response primitive from the upper layer at an ASP or IPSP, the TUA layer sends a corresponding TUA Dialogue Handling (DH) or Component Handling (CH) message (see Section 3) to its TUA peer. The TUA peer receiving the DH or CH message delivers the corresponding TC primitive to the TC-User at the IPSP or Nodal Interworking Function at the SG as illustrated in Figure 4. The mapping of TC primitives to TUA DH Messages is listed in Table 2, and the CH Messages in Table 3 (see Section 1.6.1). B. Bidulock Version 0.5 Page 111 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 _______________ _______ _______ _______ | | | | | | | | | Nodal | | | | | | | | Interworking | |TC-User| |TC-User| |TC-User| | Function | | | | | | | | ___________ | |_______| |_______| |_______| | | ___ | | | ^ | ^ | ^ | | | | | | | | | | | | |_v___|___v___|_| | | | | | | | ^ | ^ | | | | | | | | | | TC-User | | | | TC-User | | - + - + - + - + - - - - - + - + - - - - + - + - - - - - + - + - - | | | | Boundary | | | | Boundary | | _v___|_ _v___|_ _v___|_ _v___|_ _v___|_ | | | | | | | | | | | | | | | | | | | TCAP | TUA | | TUA | | TUA | | TUA | | | | | | | | | | |_______|_______| |_______| |_______| |_______| | | | ^ | ^ | ^ | ^ | | | | | | | | | | | | | | _ | | | | _ | | | SS7 | | |___/_\_____| | | |____/_\____| | | | |______|___|________| |_______|___|_______| |///////| \_/ \_/ | | / / | | / / SCTP Association SCTP Association \______ ______/ \___ ___/ \___ ___/ \___ ___/ \/ \/ \/ \/ SG ASP IPSP IPSP Figure 4. TUA Layer Model 4.1.2. Receipt of Primitives from TCAP Upon receiving a TC indication or confirmation primitive from TCAP at an SG, the Nodal Interworking Function passes the primitive to TUA. The TUA layer sends a corresponding TUA Dialogue Handling (DH) or Component Handling (CH) message (see Section 3) to its TUA peer at the ASP. The TUA peer receiving the DH or CH message delivers the corresponding TC primitive to the TC-User at the ASP as illustrated in Figure 4. The mapping of TC primitives to TUA DH Messages is listed in Table 2, and the CH Messages in Table 3 (see Section 1.6.1). The TUA Transaction Mapping Function (see Section) For TC-BEGIN indications, the TUA Transaction Mapping Function (TMF) determines the Application Server (AS) based on comparing the address B. Bidulock Version 0.5 Page 112 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 and dialogue portion information in the primitive with a provisioned Routing Key. From the list of ASPs within an AS table, an ASP in the ASP-ACTIVE state is selected and a TQRY message is constructed and issued on the corresponding SCTP association. The TUA at the SG is also responsible for assigning and managing a Dialogue Identifier which is sent to the ASP in the TQRY message to identify the newly created dialogue to the ASP. Information associated with the dialogue is stored in the SG in an implementation dependent manner; however, the SG must be capable of associating further TUA messages with the correct Dialogue at the SG. The SG will have to access this stored information to continue processing the dialogue. The TUA Transaction Mapping Function (TMF) determines the Application Server (AS) based on comparing the information in the primitive with a provisioned Routing Key. 4.1.2.1. Receipt of Management Primitives from TCAP When TCAP Management indications are received (N-STATE, N-PCSTATE, N-COORD), TCAP Management determines whether there are concerned local TC-Users. When these local TC-Users are in fact Application Servers, serviced by ASPs, TUA management is transparently informed with the N- STATE, N-PCSTATE, N-COORD indication primitive upon which it formats and transfers the applicable SSNM message (DUNA, DAVA, DRST, DUPU or SCON) to the list of concerned ASPs. The TUA message distribution function determines the Application Server (AS) based on comparing the information in the TC-BEGIN, TC- CONTINUE, TC-END, or TC-ABORT primitive with a provisioned Routing Key. From the list of ASPs within the AS table, an ASP in the ASP-ACTIVE state is selected and Dialogue Handling (DH) and Component Handling (CH) messages are constructed and issued on the corresponding SCTP association. If more than one ASP is in the ASP-ACTIVE state (i.e., traffic is to be load-shared across more than one ASP), one of the ASPs in the ASP-ACTIVE state is selected from the list. (If the ASPs are in Broadcast Mode, all active ASPs will be selected and the message sent to each of the active ASPs.) The selection algorithm is implementation dependent but could, for example, be round robin or based on the SLS. The appropriate selection algorithm must be chosen carefully as it is dependent on application assumptions and understanding of the degree of state coordination between the ASP- ACTIVE ASPs in the AS. In addition, the message needs to be sent on the appropriate SCTP stream, again taking care to meet the message sequencing needs of the signalling application. Dialogue Handling (DH) and Component Handling (CH) messages SHOULD be sent on an SCTP stream other than stream `0'. B. Bidulock Version 0.5 Page 113 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 When there is no Routing Key match, or only a partial match, for an incoming SS7 message, a default treatment MAY be specified. Possible solutions are to provide a default Application Server at the SGP that directs all unallocated traffic to a (set of) default ASP(s), or to drop the message and provide a notification to Layer Management in an M-ERROR indication primitive. The treatment of unallocated traffic is implementation dependent. 4.1.3. Receipt of Primitive from the Layer Management On receiving primitives from the local Layer Management, the TUA layer will take the requested action and provide an appropriate response primitive to Layer Management. An M-SCTP_ESTABLISH request primitive from Layer Management at an ASP or IPSP will initiate the establishment of an SCTP association. The TUA layer will attempt to establish an SCTP association with the remote TUA peer by sending an SCTP-ASSOCIATE primitive to the local SCTP layer. When an SCTP association has been successfully established, the SCTP will send an SCTP-COMMUNICATION_UP notification primitive to the local TUA layer. At the ASP or IPSP that initiated the request, the TUA layer will send an M-SCTP_ESTABLISH confirm primitive to Layer Management when the association setup is complete. At the peer TUA layer, an M-SCTP_ESTABLISH indication primitive is sent to Layer Management upon successful completion of an incoming SCTP association setup. An M-SCTP_RELEASE request primitive from Layer Management initiates the shutdown of an SCTP association. The TUA layer accomplishes a graceful shutdown of the SCTP association by sending an SCTP-SHUTDOWN primitive to the SCTP layer. When the graceful shutdown of the SCTP association has been accomplished, the SCTP layer returns an SCTP-SHUTDOWN_COMPLETE notification primitive to the local TUA layer. At the TUA Layer that initiated the request, the TUA layer will send an M-SCTP_RELEASE confirm primitive to Layer Management when the association shutdown is complete. At the peer TUA Layer, an M-SCTP_RELEASE indication primitive is sent to Layer Management upon abort or successful shutdown of an SCTP association. An M-SCTP_STATUS request primitive supports a Layer Management query of the local status of a particular SCTP association. The TUA layer simply maps the M-SCTP_STATUS request primitive to an SCTP-STATUS primitive to the SCTP layer. When the SCTP responds, the TUA layer maps the association status information to an M-SCTP_STATUS confirm primitive. No peer protocol is invoked. Similar LM-to-TUA-to-SCTP and SCTP-to-TUA-to-LM primitive mappings can be described for the various other SCTP Upper Layer primitives in RFC 2960 [SCTP] such as INITIALIZE, SET PRIMARY, CHANGE HEARTBEAT, B. Bidulock Version 0.5 Page 114 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 REQUEST HEARTBEAT, GET SRTT REPORT, SET FAILURE THRESHOLD, SET PROTOCOL PARAMETERS, DESTROY SCTP INSTANCE, SEND FAILURE, AND NETWORK STATUS CHANGE. Alternatively, these SCTP Upper Layer primitives (and Status as well) can be considered for modeling purposes as a Layer Management interaction directly with the SCTP Layer. M-NOTIFY indication and M-ERROR indication primitives indicate to Layer Management the notification or error information contained in a received TUA Notify (NTFY) or Error (ERR) message respectively. These indications can also be generated based on local TUA events. An M-ASP_STATUS request primitive supports a Layer Management query of the status of a particular local or remote ASP. The TUA layer responds with the status in an M-ASP_STATUS confirm primitive. No TUA peer protocol is invoked. An M-AS_STATUS request supports a Layer Management query of the status of a particular AS. The TUA responds with an M-AS_STATUS confirm primitive. No TUA peer protocol is invoked. M-ASP_UP request, M-ASP_DOWN request, M-ASP_ACTIVE request and M- ASP_INACTIVE request primitives allow Layer Management at an ASP to initiate state changes. Upon successful completion, a corresponding confirm primitive is provided by the TUA layer to Layer Management. If an invocation is unsuccessful, an Error indication primitive is provided in the primitive. These requests result in outgoing ASP Up (ASPUP), ASP Down (ASPDN), ASP Active (ASPAC) and ASP Inactive (ASPIA) messages to the remote TUA peer at an SGP or IPSP. 4.2. Procedures to Support the Management of SCTP Associations 4.2.1. Receipt of TUA Peer Management Messages Upon successful state changes resulting from reception of ASP Up (ASPUP), ASP Down (ASPDN), ASP Active (ASPAC) and ASP Inactive (ASPIA) messages from a peer TUA, the TUA layer MAY invoke corresponding M- ASP_UP, M-ASP_DOWN, M-ASP_ACTIVE and M-ASP_INACTIVE, M-AS_ACTIVE, M- AS_INACTIVE, and M-AS_DOWN indication primitives to the local Layer Management. M-NOTIFY indication and M-ERROR indication primitives indicate to Layer Management the notification or error information contained in a received TUA Notify (NTFY) or Error (ERR) message. These indications can also be generated based on local TUA events. All MGMT, ASPSM, ASPTM and RKM messages, except BEAT, BEAT ACK and NTFY, SHOULD be sent with sequenced delivery to ensure ordering. All MGMT, ASPSM and RKM messages, with the exception of BEAT, BEAT ACK and NTFY messages MUST be sent on SCTP stream '0'. ASPTM messages MAY be sent on one of the streams used to carry data traffic related to the Routing Context(s), to minimize possible message loss. BEAT, BEAT ACK, and NTFY messages MAY be sent using out-of-order delivery, and MAY be sent on any stream. B. Bidulock Version 0.5 Page 115 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.3. AS and ASP State Maintenance The TUA layer on the SGP maintains the state of each remote ASP, in each Application Server that the ASP is configured to receive traffic, as input to the TUA message distribution function. Similarly, where IPSPs use TUA in a point-to-point fashion, the TUA layer in an IPSP maintains the state of remote IPSPs. Two IPSP models are defined with regards to the number of messages that are needed to an IPSP state change. They are defined as follows: (1) IPSP Single Exchange (SP) model. Only a single exchange of ASPTM or ASPSM messages is needed to change the IPSP state. This means that a request from one end and an acknowledgment from the other will be enough. (2) IPSP Double Exchange (DE) model. Both IPSPs have to send request messages and both IPSPs have to acknowledge the request messages from the other end. This results in a double exchange of ASPTM and ASPSM messages, one from each end. To ensure interoperability, a TUA implementation supporting IPSP communication MUST support the IPSP SE model and MAY implement the IPSP DE model. In section 4.3.1, only the SGP-ASP and IPSP SE scenarios are described. For the IPSP DE model, both IPSPs MUST follow the SGP side of the SGP-ASP procedures. In section 4.3.2, only the SGP-ASP scenario is described. All of the procedures referring to an AS served by ASPs are also applicable to AS server by IPSPs. In section 4.3.3, only the Management procedures for the SGP-ASP scenario are described. The corresponding Management procedures for IPSPs are directly inferred. The remaining sections contain specific IPSP Considerations subsections. 4.3.1. ASP/IPSP States The state of each remote ASP/IPSP, in each AS that it is configured to operate, is maintained in the TUA layer (i.e. in the SGP or peer IPSP, respectively). The state of a particular ASP/IPSP in a particular AS changes due to events. The events include: + reception of messages from the peer TUA layer at the ASP/IPSP; + reception of some messages from the peer TUA layer at other ASPs/IPSPs in the AS (e.g, ASP Active message indicating "Override"); + reception of indications from the SCTP layer; or, B. Bidulock Version 0.5 Page 116 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 + Local Management intervention. The ASP/IPSP state transition diagram is shown in Figure 5. The possible states of an ASP/IPSP are: ASP-DOWN: The remote TUA peer at the ASP/IPSP is unavailable or the related SCTP association is down. Initially all ASPs/IPSPs will be in this state. An ASP/IPSP in this state SHOULD NOT be sent any TUA messages, with the exception of Heartbeat (BEAT), ASP Down Ack (ASPDN ACK) and Error (ERR) messages. ASP-INACTIVE: The remote TUA peer at the ASP/IPSP is available (and the related SCTP association is up) but application traffic is stopped. In this state, the ASP/IPSP SHOULD NOT be sent any DH, CH or SSNM messages for the AS for which the ASP/IPSP is inactive. ASP-ACTIVE: The remote TUA peer at the ASP/IPSP is available and application traffic is active (for a particular Routing +--------------+ | | +----------------------| ASP-ACTIVE | | Other +-------| | |ASP/IPSP in AS| +--------------+ | Overrides | ^ | | | ASPAC/ | | ASPIA/ | |[ASPAC-Ack]| |[ASPIA Ack] | | | v | | +--------------+ | | | | | +------>| ASP-INACTIVE | | +--------------+ | ^ | ASPDN/ | | | ASPDN/ [ASPDN-Ack/]| ASPUP/ | |[ASPDN-Ack/] SCTP CDI/ | [ASPUP Ack] | | SCTP CDI/ SCTP RI | | v SCTP RI | +--------------+ | | | +--------------------->| ASP-DOWN | | | +--------------+ The transitions in brackets are just valid for the IPSP SE model communication while while the rest are valid for both ASPs and IPSPs. Figure 5. ASP State Transition Diagram (Per AS) B. Bidulock Version 0.5 Page 117 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Context or set of Routing Contexts). SCTP CDI: The SCTP CDI denotes the local SCTP layer's Communication Down Indication to the Upper Layer Protocol (TUA) on an SGP. The local SCTP layer will send this indication when it detects the loss of connectivity to the ASPs peer SCTP layer. SCTP CDI is understood as either a SHUTDOWN_COMPLETE notification or COMMUNICATION_LOST notification from the SCTP layer. SCTP RI: The local SCTP layer's Restart indication to the upper layer protocol (TUA) on an SG. The local SCTP will send this indication when it detects a restart from the ASPs peer SCTP layer. 4.3.2. AS States The state of the AS is maintained in the TUA layer on the SGP. The state of an AS changes due to events. These events include: + ASP state transitions + Recovery timer triggers The possible states of an AS are: AS-DOWN: The Application Server is unavailable. This state implies that all related ASPs are in the ASP-DOWN state for this AS. Initially the AS will be in this state. An Application Server is in the AS-DOWN state when it is removed from a configuration. AS-INACTIVE: The Application Server is available but no application traffic is active (i.e., one or more related ASPs are in the ASP-INACTIVE state, but none in the ASP-ACTIVE state). The recovery timer T(r) is not running or has expired. AS-ACTIVE: The Application Server is available and application traffic is active. This state implies that at least one ASP is in the ASP-ACTIVE state. AS-PENDING: An active ASP has transitioned to ASP-INACTIVE or ASP- DOWN and it was the last remaining active ASP in the AS. A recovery timer T(r) SHOULD be started and all incoming signalling messages SHOULD be queued by the SGP. If an ASP becomes ASP-ACTIVE before T(r) expires, the AS is moved to the AS-ACTIVE state and all the queued messages will be sent to the ASP. If T(r) expires before an ASP becomes ASP-ACTIVE, and the SGP has no other alternative, the SGP may stop queuing messages and discard all previously queued messages. The AS will move to the AS-INACTIVE state if at least one ASP is in ASP-INACTIVE state, otherwise it will move B. Bidulock Version 0.5 Page 118 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 to AS-DOWN state. +----------+ one ASP trans to ACTIVE +-------------+ | AS- |--------------------------->| AS- | | INACTIVE | | ACTIVE | | |<--- | | +----------+ \ +-------------+ ^ | \ Tr Expiry, ^ | | | \ at least one | | | | \ ASP in ASP-INACTIVE | | | | \ | | | | \ | | | | \ | | one ASP | | all ASP \ one ASP | | Last ACTIVE trans | | trans to \ trans to | | ASP trans to to | | ASP-DOWN ------\ ASP- | | ASP-INACTIVE ASP- | | \ ACTIVE | | or ASP-DOWN INACTIVE| | \ | | (start Tr) | | \ | | | | \ | | | v \ | v +----------+ \ +-------------+ | | --| | | AS-DOWN | | AS-PENDING | | | | (queuing) | | |<---------------------------| | +----------+ Tr Expiry and no ASP +-------------+ in ASP-INACTIVE state Tr = Recovery Timer Figure 6. AS State Transition Diagram Figure 6 shows an example AS state machine for the case where the AS data is pre-configured. For other cases where the ASP configuration data is created dynamically, there would be differences in the state machine, especially at creation of the AS. For example, where the AS configuration data is not created until Registration of the first ASP, the AS-INACTIVE state is entered directly upon the first successful REG REQ from an ASP. Another example is where the AS configuration data is not created until the first ASP successfully enters the ASP-ACTIVE state. In this case the AS-ACTIVE state is entered directly. 4.3.2.1. IPSP Considerations The AS state diagram for the AS-SG case is applicable for IPSP communication. B. Bidulock Version 0.5 Page 119 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.3.3. TUA Management Procedures for Primitives Before the establishment of an SCTP association the ASP state at both the SGP and ASP is assumed to be in the state ASP-DOWN. Once the SCTP association is established (see Section 4.2.1) and assuming that the local TC-User is ready, the local TUA ASP Maintenance (ASPM) function will initiate the relevant procedures, using the ASP Up, ASP Down, ASP Active and ASP Inactive messages to convey the ASP state to the SGP (see Section 4.3.4). If the TUA layer subsequently receives an SCTP-COMMUNICATION_DOWN or SCTP-RESTART indication primitive from the underlying SCTP layer, it will inform the Layer Management by invoking the M-SCTP_STATUS indication primitive. The state of the ASP will be moved to ASP-DOWN. At an ASP, the TC-User will be informed of the unavailability of any affected SS7 destination through the use of N-PCSTATE indication primitives. In the case of SCTP-COMMUNICATION_DOWN, the SCTP client MAY try to re-establish the SCTP association. This MAY be done by the TUA layer automatically, or Layer Management MAY re-establish using the M- SCTP_ESTABLISH request primitive. In the case of an SCTP-RESTART indication at an ASP, the ASP is now considered by its TUA peer to be in the ASP-DOWN state. The ASP, if it is to recover, must begin any recovery with the ASP-Up procedure. 4.3.4. ASPM Procedures for Peer-to-Peer Messages 4.3.4.1. ASP Up Procedures After an ASP has successfully established an SCTP association to an SGP, the SGP waits for the ASP to send an ASP Up (ASPUP) message, indicating that the ASP TUA peer is available. The ASP is always the initiator of the ASP Up (ASPUP) message. This action MAY be initiated at the ASP by an M-ASP_UP request primitive from Layer Management or MAY be initiated automatically by an TUA management function. When an ASP Up (ASPUP) message is received at an SGP and internally the remote ASP is in the ASP-DOWN state and not considered locked-out for local management reasons, the SGP marks the remote ASP in the state ASP-INACTIVE and informs Layer Management with an M-ASP_Up indication primitive. If the SGP is aware, via current configuration data, which Application Servers the ASP is configured to operate in, the SGP updates the ASP state to ASP-INACTIVE in each AS that it is a member. Alternatively, the SGP may move the ASP into a pool of Inactive ASPs available for future configuration within Application Server(s), determined in a subsequent Registration Request or ASP Active procedure. If the ASP Up (ASPUP) message contains an ASP Identifier, B. Bidulock Version 0.5 Page 120 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 the SGP should save the ASP Identifier for that ASP. The SGP MUST send an ASP Up Ack (ASPUP ACK) message in response to a received ASP Up (ASPUP) message even if the ASP is already marked as ASP-INACTIVE at the SGP. If for any local reason (e.g, management lock-out) the SGP cannot respond with an ASP Up Ack (ASPUP ACK) message, the SGP responds to an ASP Up (ASPUP) message with an Error (ERR) message with Reason "Refused - Management Blocking". At the ASP, the ASP Up Ack (ASPUP ACK) message received is not acknowledged. Layer Management is informed with an M-ASP_UP confirm primitive. When the ASP sends an ASP Up (ASPUP) message it starts timer T(ack). If the ASP does not receive a response to an ASP Up (ASPUP) message within T(ack), the ASP MAY restart T(ack) and resend ASP Up (ASPUP) messages until it receives an ASP Up Ack (ASPUP ACK) message. T(ack) is provisionable, with a default of 2 seconds. Alternatively, retransmission of ASP Up (ASPUP) messages MAY be put under control of Layer Management. In this method, expiry of T(ack) results in an M- ASP_UP confirm primitive carrying a negative indication. The ASP must wait for the ASP Up Ack (ASPUP ACK) message before sending any other TUA messages (e.g, ASP Active or REG REQ). If the SGP receives any other TUA messages before ASPUP message is received (other than ASPDN - see Section 4.3.4.2), the SGP SHOULD discard them. If an ASP Up (ASPUP) message is received and internally the remote ASP is in the ASP-ACTIVE state, an ASP Up Ack (ASPUP ACK) message is returned, as well as an Error (ERR) message ("Unexpected Message), and the remote ASP state is changed to ASP-INACTIVE in all relevant Application Servers. If an ASP Up (ASPUP) message is received and internally the remote ASP is already in the ASP-INACTIVE state, an ASP Up Ack (ASPUP ACK) message is returned and no further action is taken. 4.3.4.1.1. TUA Version Control If an ASP Up (ASPUP) message with an unsupported version is received, the receiving end responds with an Error (ERR) message, indicating the version the receiving node supports and notifies Layer Management. This is useful when protocol version upgrades are being performed in a network. A node upgraded to a newer version should support the older versions used on other nodes it is communicating with. Because ASPs initiate the ASP Up procedure it is assumed that the Error (ERR) message would normally come from the SGP. B. Bidulock Version 0.5 Page 121 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.3.4.1.2. IPSP Considerations An IPSP may be considered in the ASP-INACTIVE state after and ASPUP or ASPUP Ack has been received from it. An IPSP can be considered in the ASP-DOWN state after an ASPDN or ASPDN Ack has been received from it. The IPSP may inform Layer Management of the change in state of the remote IPSP using M-ASP_UP or M-ASP_DN indication or confirmation primitives. Alternatively, when using the IPSP DE model, an interchange of ASPUP messages from each end MUST be performed. Four messages are needed for completion. If for any local reason (e.g, management lock-out) and IPSP cannot respond to an ASP Up (ASPUP) message with an ASP Up Ack (ASPUP ACK) message, it responds to an ASP Up (ASPUP) message with an Error (ERR) message with Reason "Refused - Management Blocking" and leaves the remote IPSP in the ASP-DOWN state. 4.3.4.2. ASP Down Procedures The ASP will send an ASP Down (ASPDN) message to an SGP when the ASP wishes to be removed from service in all Application Servers that it is a member and no longer receive any DH, CH, SSNM or ASPTM messages. This action MAY be initiated at the ASP by an M-ASP_DOWN request primitive from Layer Management or MAY be initiated automatically by an TUA management function. Whether the ASP is permanently removed from any AS is a function of configuration management. Whenever the ASP previously used the Registration procedures (see Section 4.4.1) to register within Application Servers but has not deregistered from all of them prior to sending the ASP Down (ASPDN) message, the SGP MUST consider the ASP as Deregistered in all Application Servers that it is still a member. The SGP marks the ASP as ASP-DOWN, informs Layer Management with an M-ASP_Down indication primitive, and returns an ASP Down Ack (ASPDN ACK) message to the ASP. The SGP MUST send an ASP Down Ack (ASPDN ACK) message in response to a received ASP Down (ASPDN) message from the ASP even if the ASP is already marked as ASP-DOWN at the SGP. At the ASP, the ASP Down Ack (ASPDN ACK) message received is not acknowledged. Layer Management is informed with an M-ASP_DOWN confirm primitive. If the ASP receives an ASP Down Ack without having sent an ASP Down (ASPDN) message, the ASP should now consider itself as in the ASP-DOWN state. If the ASP was previously in the ASP-ACTIVE or ASP_INACTIVE state, the ASP should then initiate procedures to return itself to its previous state. When the ASP sends an ASP Down (ASPDN) message it starts timer T(ack). If the ASP does not receive a response to an ASP Down (ASPDN) B. Bidulock Version 0.5 Page 122 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 message within T(ack), the ASP MAY restart T(ack) and resend ASP Down (ASPDN) messages until it receives an ASP Down Ack (ASPDN ACK) message. T(ack) is provisionable, with a default of 2 seconds. Alternatively, retransmission of ASP Down (ASPDN) messages MAY be put under control of Layer Management. In this method, expiry of T(ack) results in an M-ASP_DOWN confirm primitive carrying a negative indication. 4.3.4.3. ASP Active Procedures Anytime after the ASP has received an ASP Up Ack (ASPUP ACK) message from the SGP or IPSP, the ASP MAY send an ASP Active (ASPAC) message to the SGP indicating that the ASP is ready to start processing traffic. This action MAY be initiated at the ASP by an M-ASP_ACTIVE request primitive from Layer Management or MAY be initiated automatically by an TUA management function. Whenever an ASP wishes to process the traffic for more than one Application Server across a common SCTP association, the ASP Active (ASPAC) message(s) SHOULD contain a list of one or more Routing Contexts to indicate for which Application Servers the ASP Active (ASPAC) message applies. It is not necessary for the ASP to include all Routing Contexts of interest in a single ASP Active (ASPAC) message, thus requesting to become active in all Routing Contexts at the same time. Multiple ASP Active (ASPAC) messages MAY be used to activate within the Application Servers independently, or in sets. Whenever an ASP Active (ASPAC) message does not contain a Routing Context parameter, the receiver must know, via configuration data, which Application Server(s) the ASP is a member. For the Application Servers that the ASP can successfully activate, the SGP or IPSP responds with one or more ASP Active Ack (ASPAC ACK) messages, including the associated Routing Context(s) and reflecting any Traffic Mode Type values present in the related ASP Active (ASPAC) message. The Routing Context parameter MUST be included in the ASP Active Ack (ASPAC ACK) message(s) if the received ASP Active (ASPAC) message contained any Routing Contexts. Depending on any Traffic Mode Type request in the ASP Active (ASPAC) message or local configuration data if there is no request, the SGP moves the ASP to the correct ASP traffic state within the associated Application Server(s). Layer Management is informed with an M-ASP_Active indication. If the SGP or IPSP receives any DH or CH messages before an ASP Active (ASPAC) message is received, the SGP or IPSP MAY discard them. By sending an ASP Active Ack (ASPAC ACK) message, the SGP or IPSP is now ready to receive and send traffic for the related Routing Context(s). The ASP SHOULD NOT send DH or CH messages for the related Routing Context(s) before receiving an ASP Active Ack (ASPAC ACK) message, or it will risk message loss. Multiple ASP Active Ack (ASPAC ACK) messages MAY be used in response to an ASP Active (ASPAC) message containing multiple Routing Contexts, allowing the SGP or IPSP to independently acknowledge the ASP Active (ASPAC) message for different (sets of) Routing Contexts. The SGP or IPSP MUST send an Error (ERR) message ("Invalid Routing Context") for B. Bidulock Version 0.5 Page 123 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 each Routing Context value that cannot be successfully activated. Whenever an "out-of-the-blue" ASP Active (ASPAC message is received (i.e., the ASP has not registered with the SG or the SG has no static configuration data for the ASP), the message MAY be silently discarded. The SGP MUST send an ASP Active Ack (ASPAC ACK) message in response to a received ASP Active (ASPAC) message from the ASP, if the ASP is already marked in the ASP-ACTIVE state at the SGP. At the ASP, the ASP Active Ack (ASPAC ACK) message received is not acknowledged. Layer Management is informed with an M-ASP_ACTIVE confirm primitive. It is possible for the ASP to receive DH or CH message(s) before the ASP Active Ack (ASPAC ACK) message as the ASP Active Ack and DH or CH messages from an SG or IPSP may be sent on different SCTP streams. Message loss is possible, as the ASP does not consider itself in the ASP-ACTIVE state until reception of the ASP Active Ack (ASPAC ACK) message. When the ASP sends an ASP Active (ASPAC) message it starts timer T(ack). If the ASP does not receive a response to an ASP Active (ASPAC) message within T(ack), the ASP MAY restart T(ack) and resend ASP Active (ASPAC) messages until it receives an ASP Active Ack (ASPAC ACK) message. T(ack) is provisionable, with a default of 2 seconds. Alternatively, retransmission of ASP Active (ASPAC) messages MAY be put under control of Layer Management. In this method, expiry of T(ack) results in an M-ASP_ACTIVE confirm primitive carrying a negative indication. There are three modes of Application Server traffic handling in the SGP TUA layer: Override, Load-share and Broadcast. When included, the Traffic Mode Type parameter in the ASP Active (ASPAC) message indicates the traffic-handling mode to be used in a particular Application Server. If the SGP determines that the mode indicated in an ASP Active (ASPAC) message is unsupported or incompatible with the mode currently configured for the AS, the SGP responds with an Error (ERR) message ("Unsupported/Invalid Traffic Handling Mode"). If the traffic- handling mode of the Application Server is not already known via configuration data, then the traffic-handling mode indicated in the first ASP Active (ASPAC) message causing the transition of the Application Server state to AS-ACTIVE MAY be used to set the mode. In the case of an Override mode AS, reception of an ASP Active (ASPAC) message at an SGP causes the (re)direction of all traffic for the AS to the ASP that sent the ASP Active (ASPAC) message. Any previously active ASP in the AS is now considered to be in state ASP- INACTIVE and SHOULD no longer receive traffic from the SGP within the AS. The SGP or IPSP then MUST send a Notify (NTFY) message ("Alternate ASP Active") to the previously active ASP in the AS, and SHOULD stop traffic to or from that ASP. The ASP receiving this Notify MUST consider itself now in the ASP-INACTIVE state, if it is not already aware of this via inter- ASP communication with the B. Bidulock Version 0.5 Page 124 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Overriding ASP. In the case of a Load-share mode AS, reception of an ASP Active (ASPAC) message at an SGP or IPSP causes the direction of traffic to the ASP sending the ASP Active (ASPAC) message, in addition to all the other ASPs that are currently active in the AS. The algorithm at the SGP for load-sharing traffic within an AS to all the active ASPs is implementation dependent. The algorithm could, for example, be round robin or based on information in the DH or CH message. An SGP or IPSP, upon reception of an ASP Active (ASPAC) message for the first ASP in a Load-share AS, MAY choose not to direct traffic to a newly active ASP until it determines that there are sufficient resources to handle the expected load (e.g, until there are "n" ASPs in state ASP-ACTIVE in the AS). All ASPs within a load-sharing mode AS must be able to process any DH or CH message received for the AS, to accommodate any potential fail-over or re-balancing of the offered load. In the case of a Broadcast mode AS, reception of an ASP Active (ASPAC) message at an SGP or IPSP causes the direction of traffic to the ASP sending the ASP Active (ASPAC) message, in addition to all the other ASPs that are currently active in the AS. The algorithm at the SGP for broadcasting traffic within an AS to all the active ASPs is a simple broadcast algorithm, where every message is sent to each of the active ASPs. An SGP or IPSP, upon reception of an ASP Active (ASPAC) message for the first ASP in a Broadcast AS, MAY choose not to direct traffic to a newly active ASP until it determines that there are sufficient resources to handle the expected load (e.g, until there are "n" ASPs in state ASP-ACTIVE in the AS). Whenever an ASP in a Broadcast mode AS becomes ASP-ACTIVE, the SGP MUST tag the first DH or CH message broadcast in each SCTP stream with a unique Correlation Id parameter. The purpose of this Correlation Id is to permit the newly active ASP to synchronize it's processing of traffic in each ordered stream with the other ASPs in the broadcast group. 4.3.4.3.1. IPSP Considerations Either of the IPSPs can initiate communication. When an IPSP receives an ASP Active, it should mark the peer as ASP-ACTIVE and return an ASP Active Ack (ASPAC ACK) message. An ASP receiving an ASP Active Ack (ASPAC ACK) message may mark the peer as ASP-Active, if it is not already in the ASP- ACTIVE state. Alternatively, when using the IPSP DE model, an interchange of ASPAC messages from each end MUST be performed. Four messages are needed for completion. B. Bidulock Version 0.5 Page 125 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.3.4.4. ASP Inactive Procedures When an ASP wishes to withdraw from receiving traffic within an AS, or the ASP wants to initiate the process of deactivation, the ASP sends an ASP Inactive (ASPIA) message to the SGP or IPSP. An ASP Inactive (ASPIA) message MUST always be responded by the peer (although other messages may be sent in the middle): + If the corresponding RK is registered (statically or dynamically), the peer should respond with an ASP Inactive Ack (ASPIA Ack) message. + If the RK is not registered, or the RC information is not valid, the peer must respond with an Error (ERR) message with error code "Invalid Routing Context". + If the RC is missing and its specification is needed according to the used configuration, the peer must respond with an Error (ERR) message with error code "No Configured AS for ASP". The action of sending the ASP Inactive (ASPIA) message MAY be initiated at the ASP by an M-ASP_INACTIVE request primitive from Layer Management or MAY be initiated automatically by an TUA management function. Whenever an ASP is processing the traffic for more than one Application Server across a common SCTP association, the ASP Inactive (ASPIA) message contains one or more Routing Contexts to indicate for which Application Servers the ASP Inactive (ASPIA) message applies. Whenever an ASP Inactive (ASPIA) message does not contain a Routing Context parameter, the receiver must know, via configuration data, which Application Servers the ASP is a member and move the ASP to the ASP-INACTIVE state in each all Application Servers. In the case of an Override mode AS, where another ASP has already taken over the traffic within the AS with an ASP Active (ASPAC) message, the ASP that sends the ASP Inactive (ASPIA) message is already considered by the SGP to be in state ASP-INACTIVE. An ASP Inactive Ack (ASPIA ACK) message is sent to the ASP, after ensuring that all traffic is stopped to the ASP. In the case of a Load-share mode AS, the SGP moves the ASP to the ASP-INACTIVE state and the AS traffic is re-allocated across the remaining ASPs in the state ASP-ACTIVE, as per the load-sharing algorithm currently used within the AS. A Notify (NTFY) message ("Insufficient ASP resources active in AS") MAY be sent to all inactive ASPs, if required. An ASP Inactive Ack (ASPIA ACK) message is sent to the ASP after all traffic is halted and Layer Management is informed with an M-ASP_INACTIVE indication primitive. In the case of a Broadcast mode AS, the SGP moves the ASP to the ASP- INACTIVE state and the AS traffic is broadcast only to the remaining ASPs in the state ASP-ACTIVE. A Notify (NTFY) message ("Insufficient ASP resources active in AS") MAY be sent to all inactive ASPs, if required. An ASP Inactive Ack (ASPIA ACK) message is sent to the ASP after all traffic is halted and Layer Management is B. Bidulock Version 0.5 Page 126 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 informed with an M-ASP_INACTIVE indication primitive. Multiple ASP Inactive Ack (ASPIA ACK) messages MAY be used in response to an ASP Inactive (ASPIA) message containing multiple Routing Contexts, allowing the SGP or IPSP to independently acknowledge for different (sets of) Routing Contexts. The SGP or IPSP sends an Error (ERR) ("Invalid Routing Context") message for each invalid or not configured Routing Context value in a received ASP Inactive (ASPIA) message. The SGP MUST send an ASP Inactive Ack (ASPIA ACK) message in response to a received ASP Inactive (ASPIA) message from the ASP and the ASP is already marked as ASP-INACTIVE at the SGP. At the ASP, the ASP Inactive Ack (ASPIA ACK) message received is not acknowledged. Layer Management is informed with an M-ASP_INACTIVE confirm primitive. If the ASP receives an ASP Inactive Ack without having sent an ASP Inactive (ASPIA) message, the ASP should now consider itself as in the ASP-INACTIVE state. If the ASP was previously in the ASP-ACTIVE state, the ASP should then initiate procedures to return itself to its previous state. When the ASP sends an ASP Inactive (ASPIA) message it starts timer T(ack). If the ASP does not receive a response to an ASP Inactive (ASPIA) message within T(ack), the ASP MAY restart T(ack) and resend ASP Inactive (ASPIA) messages until it receives an ASP Inactive Ack (ASPIA ACK) message. T(ack) is provisionable, with a default of 2 seconds. Alternatively, retransmission of ASP Inactive (ASPIA) messages MAY be put under control of Layer Management. In this method, expiry of T(ack) results in a M-ASP_Inactive confirm primitive carrying a negative indication. If no other ASPs in the Application Server are in the state ASP- ACTIVE, the SGP MUST send a Notify (NTFY) message ("AS-Pending") to all of the ASPs in the AS which are in the state ASP-INACTIVE. The SGP SHOULD start buffering the incoming messages for T(r) seconds, after which messages MAY be discarded. T(r) is configurable by the network operator. If the SGP receives an ASP Active (ASPAC) message from an ASP in the AS before expiry of T(r), the buffered traffic is directed to that ASP and the timer is canceled. If T(r) expires, the AS is moved to the AS-INACTIVE state. 4.3.4.4.1. IPSP Considerations An IPSP may be considered in the ASP-INACTIVE state by a remote IPSP after an ASP Inactive or ASP Inactive Ack (ASPIA ACK) message has been received from it. Alternatively, when using the IPSP DE model, an interchange of ASPIA messages from each end MUST be performed. Four messages are needed for completion. B. Bidulock Version 0.5 Page 127 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.3.4.5. Notify Procedures A Notify (NTFY) message reflecting a change in the AS state MUST be sent to all ASPs in the AS, except those in the ASP-DOWN state, with appropriate Status Information and any ASP Identifier of the failed ASP. At the ASP, Layer Management is informed with an M-NOTIFY indication primitive. The Notify (NTFY) message must be sent whether the AS state change was a result of an ASP failure or reception of an ASP State management (ASPSM) or ASP Traffic Management (ASPTM) message. In the second case, the Notify (NTFY) message MUST be sent after any ASP State or Traffic Management related acknowledgments messages (e.g, ASP Up Ack, ASP Down Ack, ASP Active Ack, or ASP Inactive Ack). Whenever a Notify (NTFY) ("AS-PENDING") message is sent by an SGP that now has no ASPs active to service the traffic, or where a Notify NTFY ("Insufficient ASP resources active in AS") message MUST be sent in the Load-share or Broadcast mode, the Notify (NTFY) message does not explicitly compel the ASP(s) receiving the message to become active. The ASPs remain in control of what (and when) traffic action is taken. Whenever a Notify (NTYF) message does not contain a Routing Context parameter, the receiver must know, via configuration data, of which Application Servers the ASP is a member and take the appropriate action in each AS. 4.3.4.5.1. IPSP Considerations (NTFY) Notify works in the same manner as in the SG-AS case. One of the IPSPs can send this message to any remote IPSP that is not in the ASP- DOWN state. 4.3.4.6. Heartbeat Procedures The optional Heartbeat procedures MAY be used when operating over transport layers that do not have their own heartbeat mechanism for detecting loss of the transport association (i.e., other than SCTP). Either TUA peer may optionally send Heartbeat (BEAT) messages periodically, subject to a provisionable timer T(beat). Upon receiving a Heartbeat (BEAT) message, the TUA peer MUST respond with a Heartbeat Ack (BEAT ACK) message. If no Heartbeat Ack (BEAT ACK) message (or any other TUA message) is received from the TUA peer within 2*T(beat), the remote TUA peer is considered unavailable. Transmission of Heartbeat (BEAT) messages is stopped and the signalling process SHOULD attempt to re-establish communication if it is configured as the client for the disconnected TUA peer. The Heartbeat (BEAT) message may optionally contain an opaque Heartbeat Data parameter that MUST be echoed back unchanged in the B. Bidulock Version 0.5 Page 128 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 related Heartbeat Ack (BEAT ACK) message. The sender, upon examining the contents of the returned Heartbeat Ack (BEAT ACK) message, MAY choose to consider the remote TUA peer as unavailable. The contents and format of the Heartbeat Data parameter is implementation-dependent and only of local interest to the original sender. The contents may be used, for example, to support a Heartbeat sequence algorithm (to detect missing Heartbeats), or a time-stamp mechanism (to evaluate delays). Note: Heartbeat related events are not shown in Figure 5 "ASP State Transition Diagram". 4.4. Routing Key Management Procedures 4.4.1. Registration An ASP MAY dynamically register with an SGP as an ASP within an Application Server using the REG REQ message. A Routing Key parameter in the REG REQ message specifies the parameters associated with the Routing Key. The SGP examines the contents of the received Routing Key parameter and compares it with the currently provisioned Routing Keys. If the received Routing Key matches an existing SGP Routing Key entry, and the ASP is not currently included in the list of ASPs for the related Application Server, the SGP MAY authorize the ASP to be added to the AS. Or, if the Routing Key does not currently exist and the received Routing Key data is valid and unique, an SGP supporting dynamic configuration MAY authorize the creation of a new Routing Key and related Application Server and add the ASP to the new AS. In either case, the SGP returns a Registration Response (REG RSP) message to the ASP, containing the same Local-RK-Identifier as provided in the initial request, and a Registration Result "Successfully Registered". A unique Routing Context value assigned to the SGP Routing Key is included. The method of Routing Context value assignment at the SGP is implementation dependent but must be guaranteed to be unique for each Application Server or Routing Key supported by the SGP. If the SGP determines that the received Routing Key data is invalid, or contains invalid parameter values, the SGP returns a Registration Response (REG RSP) message to the ASP, containing a Registration Result "Error - Invalid Routing Key", "Error - Invalid DPC", "Error - Invalid Network Appearance" as appropriate. If the SGP does not support the registration procedure, the SGP returns an Error (ERR) message to the ASP, with an error code of "Unsupported Message Type". If the SGP determines that a unique Routing Key cannot be created, the SGP returns a Registration Response (REG RSP) message to the ASP, with a Registration Status of "Error - "Cannot Support Unique Routing." An incoming signalling message received at an SGP should not match against more than one Routing Key. B. Bidulock Version 0.5 Page 129 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 If the SGP does not authorize the registration request, the SGP returns a REG RSP message to the ASP containing the Registration Result "Error - Permission Denied". If an SGP determines that a received Routing Key does not currently exist and the SGP does not support dynamic configuration, the SGP returns a Registration Response (REG RSP) message to the ASP, containing a Registration Result "Error - Routing Key not Currently Provisioned". If an SGP determines that a received Routing Key does not currently exist and the SGP supports dynamic configuration but does not have the capacity to add new Routing Key and Application Server entries, the SGP returns a Registration Response (REG RSP) message to the ASP, containing a Registration Result "Error - Insufficient Resources". If an SGP determines that one or more of the Routing Key parameters are not supported for the purpose of creating new Routing Key entries, the SGP returns a Registration Response (REG RSP) message to the ASP, containing a Registration Result "Error - Unsupported RK parameter field". This result MAY be used if, for example, the SGP does not support RK Address parameter. A Registration Response "Error - Unsupported Traffic Handling Mode" is returned if the Routing Key in the REG REQ contains a Traffic Handling Mode that is inconsistent with the presently configured mode for the matching Application Server. An ASP MAY register multiple Routing Keys at once by including a number of Routing Key parameters in a single REG REQ message. The SGP MAY respond to each registration request in a single REG RSP message, indicating the success or failure result for each Routing Key in a separate Registration Result parameter. Alternatively the SGP MAY respond with multiple REG RSP messages, each with one or more Registration Result parameters. The ASP uses the Local-RK-Identifier parameter to correlate the requests with the responses. An ASP MAY modify an existing Routing Key by including a Routing Context parameter in the REG REQ. If the SGP determines that the Routing Context applies to an existing Routing Key, the SG MAY adjust the existing Routing Key to match the new information provided in the Routing Key parameter. A Registration Response "Error - Routing Key Change Refused" is returned if the SGP does not accept the modification of the Routing Key. Upon successful registration of an ASP in an AS, the SGP can now send related SS7 Signalling Network Management messaging, if this did not previously start upon the ASP transition to state ASP-INACTIVE 4.4.2. Deregistration An ASP MAY dynamically deregister with an SGP as an ASP within an Application Server using the DEREG REQ message. A Routing Context B. Bidulock Version 0.5 Page 130 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 parameter in the DEREG REQ message specifies which Routing Keys to deregister. An ASP SHOULD move to the ASP-INACTIVE state for an Application Server before attempting to deregister the Routing Key (i.e., deregister after receiving an ASP Inactive Ack). Also, an ASP SHOULD deregister from all Application Servers that it is a member before attempting to move to the ASP-Down state. The SGP examines the contents of the received Routing Context parameter and validates that the ASP is currently registered in the Application Server(s) related to the included Routing Context(s). If validated, the ASP is deregistered as an ASP in the related Application Server. The deregistration procedure does not necessarily imply the deletion of Routing Key and Application Server configuration data at the SGP. Other ASPs may continue to be associated with the Application Server, in which case the Routing Key data MUST NOT be deleted. If a Deregistration results in no more ASPs in an Application Server, an SGP MAY delete the Routing Key data. The SGP acknowledges the deregistration request by returning a DEREG RSP message to the requesting ASP. The result of the deregistration is found in the Deregistration Result parameter, indicating success or failure with cause. An ASP MAY deregister multiple Routing Contexts at once by including a number of Routing Contexts in a single DEREG REQ message. The SGP MAY respond to each deregistration request in a single DEREG RSP message, indicating the success or failure result for each Routing Context in a separate Deregistration Result parameter. 4.4.3. IPSP Considerations (REG/DEREG) The Registration and Deregistration procedures work in the IPSP cases in the same way as in AS-SG cases. An IPSP may register an RK in the remote IPSP. An IPSP is responsible for deregistering the RKs that it has registered. 4.5. Procedures to Support Point Code and Subsystem State 4.5.1. At an SGP On receiving an N-STATE, N-PCSTATE, N-COORD indication primitive from the nodal inter-working function at an SGP, the SGP TUA layer will send a corresponding SS7 Signalling Network Management (SSNM) DUNA, DAVA, DUPU, DRST or SCON message (see Section 3) to the TUA peers at concerned ASPs. The TUA layer must fill in various fields of the SSNM messages consistently with the information received in the primitives. SSNM messages SHOULD NOT be sent on stream "0" and MAY use ordered delivery. B. Bidulock Version 0.5 Page 131 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 4.5.2. At an ASP 4.5.2.1. Single SG Configurations At an ASP, upon receiving an SS7 Signalling Network Management (SSNM) message from the remote TUA Peer, the TUA layer invokes the appropriate primitive indications to the resident TC-Users. Local management is informed. Whenever a local event has caused the unavailability or congestion status of SS7 destinations, user parts or subsystems, the TUA layer at the ASP SHOULD pass up appropriate indications in the primitives to the TUA User, as though equivalent SSNM messages were received. For example, the loss of an SCTP association to an SGP may cause the unavailability of a set of SS7 destinations, user parts or subsystems. N-PCSTATE indication primitives to the TUA User are appropriate. 4.5.2.2. Multiple SG Configurations At an ASP, upon receiving a SS7 Signalling Network Management (SSNM) message from the remote TUA Peer, the TUA layer updates the status of the affected route(s) via the originating SG and determines, whether or not the overall availability or congestion status of the effected destination(s) or subsystem(s) has changed. If so, the TUA layer invokes the appropriate primitive indications to the resident TC-Users <1>. Local management is informed. 4.5.3. ASP Auditing An ASP may optionally initiate an audit procedure to inquire of an SG the availability and, if the national congestion method with multiple congestion levels and message priorities is used, congestion status of an SS7 destination or set of destinations. In addition, the ASP may inquire of an SG the availability and congestion status of a subsystem. A Destination Audit (DAUD) message is sent from the ASP to the SGP requesting the current availability and congestion status of one or more SS7 destinations or subsystems. The DAUD message MAY be sent with unordered delivery. The ASP MAY send the DAUD in the following cases: - Periodic: A Timer originally set upon reception of a DUNA, SCON or DRST message has expired without a subsequent DAVA, DUNA, SCON or DRST message updating the availability and congestion status of the affected destinations or subsystems. The Timer is reset upon issuing a DAUD. In this case the DAUD is sent to the SGP that originally sent the SSNM message <2>. - Isolation: The ASP is newly ASP-ACTIVE or has been isolated from an SG for an extended period. The ASP MAY request the availability and congestion status of one or more SS7 destinations or subsystems to which it expects to B. Bidulock Version 0.5 Page 132 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 communicate. The SGP SHOULD either respond to a DAUD messages with SSNM messages indicating the availability and congestion status of the destination or subsystem, or SHOULD respond with an ERR ("Destination Status Unknown") or ERR ("Subsystem Status Unknown") message for each destination or subsystem requested in the DAUD message.i The status of each SS7 destination or subsystem requested is indicated in a DUNA message (if unavailable), a DAVA message (if available), or a DRST (if restricted and the SGP supports this feature). If the SS7 destination or subsystem is available and congested, the SGP responds with an SCON message in addition to the DAVA message. If the SS7 destination is restricted and congested, the SGP responds with an SCON message in addition to the DRST. If the SGP cannot return information on the availability or congestion status of the SS7 destination or subsystem, the SGP responds with an ERR ("Destination Status Unknown") or ERR ("Subsystem Status Unknown") with a list of all the destinations and subsystems for which the SGP cannot provide information. In some cases, the SGP MAY chose not to respond to a DAUD message or a component of a DAUD message on the basis of policy <3>. Any DUNA or DAVA message in response to a DAUD message MAY contain a list of Affected Point Codes. 4.5.4. TCAP - TUA Interworking at the SG On the SG, the TCAP routing or interworking function determines that the message must be sent to an AS via the TUA stack, based on information in the incoming message. The TUA outgoing mapping function identifies the appropriate Application Server (AS) and selects an active ASP from the list of ASPs servicing this AS. The appropriate ASP can be determined based on the routing information in the incoming message, local load sharing information, etc. The appropriate TUA message is then constructed and sent to the appropriate endpoint, via the correct SCTP association and stream. 4.5.4.1. Primitives received from the local TC-User These support the TUA transport of TC-User boundary primitives. The same services as supported by TCAP are to be provided by TUA. The TC- users at the SG should be able to use the same primitive interface to TCAP/TUA without any changes. The TCAP-TUA interworking function takes care of selecting the appropriate stack. The TUA needs to setup and maintain the appropriate SCTP association to the selected endpoint. TUA also manages the usage of SCTP streams. The address information passed by the TUA-user at an ASP must contain: .np a valid SS7 address to reach a destination in the SS7 network via the appropriate SCTP association to a SG .np a valid IP address or host name to reach another ASP in the IP network via the appropriate B. Bidulock Version 0.5 Page 133 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SCTP association. 4.5.4.2. Segmenting and Reassembly of Components When it is expected that TCAP signalling messages will not fit into the maximum PDU size of the underlying transport (e.g, SCCP, MTP), then segmentation and reassembly SHOULD be performed by the TC-User. In the event that the SG receives a TQRY, TCNV and TRSP message with included or associated components that exceed the maximum PDU size of the underling transport, the SGP will respond with a TNOT message with "Segmentation Not Supported" or "Segmentation Failed" or "Destination cannot perform reassembly" indicated in the Report Cause within the TNOT message considering local SG SCCP procedures <4>. Notes for Section 4 <1> IMPLEMENTATION NOTE:- To accomplish the handling of SSNM messages from multiple SGs in a multiple SG configuration, the TUA layer at an ASP maintains the status of routes via each SG. <2> IMPLEMENTATION NOTE:- In the case of a Periodic audit, the auditing procedure might not be invoked for the case of a received SCON message containing a congestion level value of "no congestion" or undefined" (i.e., congestion Level = "0"). This is because the value indicates either congestion abatement or that the ITU MTP3 international congestion method is being used. In the international congestion method, the MTP3 layer at the SGP does not maintain the congestion status of any destinations and therefore the SGP cannot provide any congestion information in response to the DAUD. For the same reason, in the second of the cases above a DAUD message cannot reveal any congested destination(s). <3> IMPLEMENTATION NOTE:- For example, an SGP MAY chose to not respond to a request for the destination or subsystem status of a specific point code in the DAUD message because the ASP that issued the DAUD message is not authorized to obtain information concerning the status of the destination as requested. <4> IMPLEMENTATION NOTE:- Typically a TC-User is responsible for performing the segmentation and reassembly of components. 5. Examples of TUA Procedures 5.1. Establishment of Association and Traffic between SGPs and ASPs 5.1.1.1. Single ASP in an Application Server ("1+0" sparing) This scenario shows the example TUA message flows for the establishment of traffic between an SG and an ASP, where only one ASP is configured within an AS (no backup). It is assumed that the SCTP association is already set-up. B. Bidulock Version 0.5 Page 134 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SG ASP | | |<-------------ASP Up------------| |-----------ASP-Up Ack---------->| | | |<------- ASP Active-------------| |-----ASP Active Ack------------>| | | 5.1.1.2. Two ASPs in Application Server ("1+1" sparing) This scenario shows the example TUA message flows for the establishment of traffic between an SG and two ASPs in the same Application Server, where ASP1 is configured to be "active" and ASP2 a "standby" in the event of communication failure or the withdrawal from service of ASP1. ASP2 may act as a hot, warm, or cold standby depending on the extent to which ASP1 and ASP2 share call or transaction state or can communicate call state under failure or withdrawal events. The example message flow is the same whether the ASP Active (ASPAC) messages are Override or Load-share mode although typically this example would use an Override mode. SG ASP1 ASP2 | | | |<--------ASP Up----------| | |-------ASP-Up Ack------->| | | | | |<-----------------------------ASP Up----------------| |-----------------------------ASP-Up Ack------------>| | | | | | | |<-------ASP Active-------| | |------ASP-Active Ack---->| | | | | 5.1.1.3. Two ASPs in an Application Server ("1+1" sparing, load-sharing case) This scenario shows the example TUA message flows for the establishment of traffic between an SG and two ASPs in the same Application Server, where the two ASPs are brought to "active" and load-share the traffic load. In this case, one ASP is sufficient to handle the total traffic load. B. Bidulock Version 0.5 Page 135 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SG ASP1 ASP2 | | | |<---------ASP Up---------| | |--------ASP-Up Ack------>| | | | | |<------------------------------ASP Up---------------| |-----------------------------ASP Up Ack------------>| | | | | | | |<--ASP Active -----------| | |-----ASP-Active Ack----->| | | | | |<----------------------------ASP Active ------------| |-------------------------------ASP-Active Ack------>| | | | 5.1.1.4. Three ASPs in an Application Server ("n+k" sparing, load- sharing case) This scenario shows the example TUA message flows for the establishment of traffic between an SG and three ASPs in the same Application Server, where two of the ASPs are brought to "active" and share the load. In this case, a minimum of two ASPs are required to handle the total traffic load (2+1 sparing). SG ASP1 ASP2 ASP3 | | | | |<------ASP Up-------| | | |-----ASP-Up Ack---->| | | | | | | |<--------------------------ASP Up-------| | |-------------------------ASP-Up Ack---->| | | | | | |<---------------------------------------------ASP Up--------| |---------------------------------------------ASP-Up Ack---->| | | | | | | | | |<--ASP Act ---------| | | |----ASP-Act Ack---->| | | | | | | |<--------------------ASP Act ----------| | |-----------------------ASP-Act Ack----->| | | | | | 5.1.2. ASP Traffic Fail-over Examples 5.1.2.1. (1+1 Sparing, withdrawal of ASP, Back-up Override) ASP1 withdraws from service: B. Bidulock Version 0.5 Page 136 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SG ASP1 ASP2 | | | |<-----ASP Inactive-------| | |----ASP Inactive Ack---->| | |-----------------------NTFY(ASP-Inact.)(Optional)-->| | | | |<------------------------------ ASP Active----------| |------------------------------ASP-Active Ack------->| | | Note: If the SG detects loss of the TUA peer (TUA heartbeat loss or detection of SCTP failure), the initial SG-ASP1 ASP Inactive (ASPIA) message exchange would not occur. 5.1.2.2. (1+1 Sparing, Back-up Override) ASP2 wishes to override ASP1 and take over the traffic: SG ASP1 ASP2 | | | |<------------------------------ ASP Active----------| |-------------------------------ASP-Active Ack------>| |----NTFY(Alt ASP-Act)--->| | | | 5.1.2.3. (n+k Sparing, Load-sharing case, withdrawal of ASP) ASP1 withdraws from service: SG ASP1 ASP2 ASP3 | | | | |<----ASP Inact.-----| | | |---ASP-Inact Ack--->| | | | | | | |---------------------------------NTFY(Ins. ASPs)(Optional)->| | | | | |<-----------------------------------------ASP Act ----------| |-------------------------------------------ASP Act (Ack)--->| | | | | The Notify (NTFY) message to ASP3 is optional, as well as the ASP- Active from ASP3. The optional Notify can only occur if the SG maintains knowledge of the minimum ASP resources required - for example if the SG knows that "n+k" = "2+1" for a load-share AS and "n" currently equals "1". Note: If the SG detects loss of the ASP1 TUA peer (TUA heartbeat loss or detection of SCTP failure), the first SG-ASP1 ASP Inactive (ASPIA) message exchange would not occur. B. Bidulock Version 0.5 Page 137 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 5.1.3. TCAP/TC-User Service Translation Examples When the TUA layer on the ASP has a DH message to send to the SG, it will do the following: (1) Determine the correct SGP (2) Find the SCTP association to the chosen SGP (3) Determine the correct stream in the SCTP association based on the DID (4) Build the DH message, fill TUA Message Header, fill Common Header (5) Send the DH message to the remote TUA peer in the SG, over the SCTP association When the TUA layer on the SG has a DH message to send to the ASP, it will do the following: (1) Determine the AS (2) Determine the Active ASP (SCTP association) within the AS (3) Determine the correct stream in the SCTP association based on the DID (4) Build the DH message, fill in TUA Message Header, fill in Common Header (5) Send the DH message to the remote TUA peer in the ASP, over the SCTP association An example of the message flows for establishing a dialogue service is shown below. An active association between ASP and SG is established (Section 5.1) prior to the following message flows. B. Bidulock Version 0.5 Page 138 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SG ASP <----------- Invoke Request <----------- Query(Begin) Request Conversation(Continue) Indication ----------> Result Indication ----------> <----------- Invoke Request <----------- Conversation(Continue) Request . . . End(response)Indication -----------> Result Indication -----------> An example of the message flows for a failed attempt to establish a dialogue on the signalling channel is shown below. In this case, the gateway has a problem with its physical connection , so it cannot establish a dialogue on the signalling channel. SG ASP <----------- Invoke Request <----------- Query(Begin) Request Abort Indication ----------> 5.2. IP-IP Architecture The sequences below outline logical steps for a variety of scenarios within an IP-IP architecture. Please note that these scenarios cover a Primary/Backup configuration. Where there is a load-sharing configuration then the AS can declare availability when 1 ASP issues ASPAC but can only declare unavailability when all ASPs have issued ASPIA. 5.2.1. Establishment of TUA connectivity The following shows an example establishment of TUA connectivity. In this example, each IP SP consists of a Management Instance (MI) and two ASPs. The Management Instance handles the address mapping mechanisms and monitors the states of the remote peer. For simplicity, the Management Instances and ASPs are considered as a separate entity. This is not a requirement, as they can be collocated with an ASP. B. Bidulock Version 0.5 Page 139 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 The following must be established before TUA traffic can flow. A connection-less flow is shown for simplicity. Each node is configured (via MIB, for example) with the connections that need to be setup IP SEP A IP SEP B ASP-a1 ASP-a2 MI a MI b ASP-b2 ASP-b1 (Primary) (Backup) (Backup) (Primary) Establish SCTP Connectivity |-- Est. SCTP Ass.--| |------ Establish SCTP Association -------| |------------- Establish SCTP Association -------------| |------------------ Establish SCTP Association ------------------| |--- Establish SCTP Assoc. ----| |------- Establish SCTP Association --------| |------------ Establish SCTP Association -------------| |-- Establish SCTP Association -| |------- Establish SCTP Association ------| Establish TUA Connectivity +---------------ASP Up-------------------> <---------------ASP Up Ack---------------+ +------------ASP Up-----------> <------------ASP Up Ack-------+ <--------------ASP Up-------------+ +--------------ASP Up Ack---------> <----------------ASP Up---------------------+ +----------------ASP Up Ack-----------------> +---------------ASP Act------------------> <---------------ASP Act Ack--------------+ <----------------ASP Act--------------------+ +----------------ASP Act Ack----------------> Traffic can now flow directly between ASPs. +-------------------------------TCAP_User Message------------------> B. Bidulock Version 0.5 Page 140 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 5.2.2. Fail-over scenarios The following sequences address fail-over of ASP 5.2.2.1. Successful ASP Fail-over scenario The following is an example of a successful fail-over scenario, where there is a fail-over from ASP-a1 to ASP-a2, i.e, Primary to Backup. Since data transfer passes directly between peer ASPs, ASP-b1 is notified of the fail-over of ASP-a1 and must buffer outgoing data messages until ASP-a2 becomes available. IP SEP A IP SEP B ASP-a1 ASP-a2 MI a MI b ASP-b2 ASP-b1 (Primary) (Backup) (Backup) (Primary) +--------------ASP Inact-----------------> <--------------ASP Inact Ack-------------+ <----NTFY (ASP-a1 Inactive)---+ +----------ASP Act------------> <----------ASP Act Ack--------+ 5.2.2.2. Unsuccessful ASP Fail-over scenario The sequence is the same as 5.2.2.1 except that, since the backup fails to come in then, the Notify (NTFY) messages declaring the availability of the backup are not sent. 6. Security Considerations The security considerations discussed for the "Security Considerations for SIGTRAN Protocols" document [SIGSEC] apply to this document. 7. IANA Considerations 7.1. SCTP Payload Protocol ID IANA has assigned a TUA value for the Payload Protocol Identifier in the SCTP DATA chunk. The following SCTP Payload Protocol Identifier is registered: TUA "5" The SCTP Payload Protocol Identifier value "5" SHOULD be included in each SCTP DATA chunk, to indicate that the SCTP is carrying the TUA protocol. The value "0" (unspecified) is also allowed but any other values MUST NOT be used. This Payload Protocol Identifier is not directly used by SCTP but MAY be used by certain network entities to identify the type of information being carried in a DATA chunk. B. Bidulock Version 0.5 Page 141 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 EDITOR'S NOTE:- The value shown above as "5" is to be assigned by IANA an may change in future versions of this document. The User Adaptation peer MAY use the Payload Protocol Identifier, as a way of determining additional information about the data being presented to it by SCTP. A request will be made to IANA to assign CTP Payload Protocol IDs. 7.2. Port Number IANA has registered SCTP Port Number 14001 for TUA. It is recommended that SGPs use this SCTP port number for listening for new connections. SGPs MAY also use statically configured SCTP port numbers instead. 7.3. Protocol Extensions This protocol may also be extended through IANA in three ways: + Through definition of additional message classes. + Through definition of additional message types. + Through definition of additional message parameters. The definition and use of new message classes, types and parameters is an integral part of SIGTRAN adaptation layers. Thus, these extensions are assigned by IANA through an IETF Consensus action as defined in [RFC2434]. The proposed extension MUST in no way adversely affect the general working of the protocol. A new registry will be created by IANA to allow 7.3.1. IETF Defined Message Classes The documentation for a new message class MUST include the following information: (1) A long and short name for the message class; (2) A detailed description of the purpose of the message class. 7.3.2. IETF Defined Message Types Documentation of the message type MUST contain the following information: (1) A long and short name for the new message type; (2) A detailed description of the structure of the message. B. Bidulock Version 0.5 Page 142 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 (3) A detailed definition and description of intended use of each field within the message. (4) A detailed procedural description of the use of the new message type within the operation of the protocol. (5) A detailed description of error conditions when receiving this message type. When an implementation receives a message type which it does not support, it MUST respond with an Error (ERR) message, with an Error Code = Unsupported Message Type. 7.3.3. IETF-defined TLV Parameter Extension Documentation of the message parameter MUST contain the following information: (1) Name of the parameter type. (2) Detailed description of the structure of the parameter field. This structure MUST conform to the general type-length-value format described earlier in the document. (3) Detailed definition of each component of the parameter value. (4) Detailed description of the intended use of this parameter type, and an indication of whether and under what circumstances multiple instances of this parameter type may be found within the same message type. 8. Timer Values Following are the RECOMMENDED timer values for TUA timers: Timer Description Value ------------------------------------------------ Ta - 2 seconds Tr - 2 seconds T(ack) Inactivity Send Timer 7 minutes T(ias) Inactivity Receive Timer 15 minutes T(beat) Heartbeat Timer 30 seconds Appendices A. Operational Considerations A.1. Signalling Network Architecture A Signalling Gateway is used to support the transport of TC-User signalling traffic received from the SS7 network to multiple B. Bidulock Version 0.5 Page 143 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 distributed ASPs (e.g., MGCs and IP Databases). Clearly, the TUA protocol is not designed to meet the performance and reliability requirements for such transport by itself. However, the conjunction of distributed architecture and redundant networks provides support for reliable transport of signalling traffic over IP. The TUA protocol is flexible enough to allow its operation and management in a variety of physical configurations, enabling Network Operators to meet their performance and reliability requirements. To meet the stringent SS7 signalling reliability and performance requirements for carrier grade networks, Network Operators might require that no single point of failure is present in the end-to-end network architecture between an SS7 node and an IP-based application. This can typically be achieved through the use of redundant SGPs or SGs, redundant hosts, and the provision of redundant QOS-bounded IP network paths for SCTP Associations between SCTP End Points. Obviously, the reliability of the SG, the MGC and other IP-based functional elements also needs to be taken into account. The distribution of ASPs and SGPs within the available Hosts MAY also be considered. As an example, for a particular Application Server, the related ASPs could be distributed over at least two Hosts. One example of a physical network architecture relevant to SS7 carrier-grade operation in the IP network domain is shown in Figure 7. B. Bidulock Version 0.5 Page 144 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 SGs MGCs .............. .............. Host#1 : ______ : : ______ : Host#3 : | |__:__________________________:__| | : = : |SGP1.1|__:_____ _______________:__| ASP1 | : MGC1 : |______| : \ / : |______| : : | |__:______\__/________________:__| | : : |SGP2.1|__:_______\/______ _____:__| ASP2 | : : |______| : /\ | | : |______: : : __:___ : + / \ | | + : ___:__ : : | | : + / \ | | + : | | : : | SGPn | : + | | | | + : | ASPn | : : |______| : | | | | : |______| : :............: | | | | :............: .............. | | \ / .............. Host#2 : ______ : | | \ / : ______ : Host#4 : | |__:_____| |______\/_______:__| | : = : |SGP1.2|__:_________________/\_______:__| ASP1 | : MGC2 : |______| : / \ : |______| : : | |__:_______________/ \_____:__| | : : |SGP2.2|__:__________________________:__| ASP2 | : : |______| : : |______| : : __:___ : + SCTP + : ___:__ : : | | : + Associations + : | | : : | SGPn | : + + : | ASPn | : : |______| : : |______| : :............: :............: SGP1.1 and SGP1.2 are part of SG1 SGP2.1 and SGP2.2 are part of SG2 Figure 7. Physical Model In this model, each host MAY have many application processes. In the case of the MGC, an ASP may provide service to one or more Application Servers, and is identified as an SCTP end point. One or more Signalling Gateway Processes make up a single Signalling Gateway. This example model can also be applied to IPSP-IPSP signalling. In this case, each IPSP MAY have its services distributed across 2 hosts or more, and may have multiple server processes on each host. In the example above, each signalling process (SGP, ASP or IPSP) is the end point to more than one SCTP association, leading to more than one other signalling processes. To support this, a signalling process must be able to support distribution of TUA messages to many simultaneous active associations. This message distribution function is based on the status of provisioned Routing Keys, the status of the signalling routes to signalling points in the SS7 network , and the redundancy model (override, load-sharing, broadcast) of the remote signalling processes. B. Bidulock Version 0.5 Page 145 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 For carrier grade networks, the failure or isolation of a particular signalling process should not cause transactions to be lost. This implies that signalling processes need, in some cases, to share the transaction state or be able to pass the transaction state information between each other. However, this sharing or communication of transaction state information is outside the scope of this document. This model serves as an example. TUA imposes no restrictions as to the exact layout of the network elements, the message distribution algorithms and the distribution of the signalling processes. Instead, it provides a framework and a set of messages that allow for a flexible and scalable signalling network architecture, aiming to provide reliability and performance. A.2. Redundancy Models A.2.1. Application Server Redundancy At the SGP, an Application Server list contains active and inactive ASPs to support ASP broadcast, load-sharing and override procedures. The list of ASPs within a logical Application Server is kept updated in the SGP to reflect the active Application Server Processes. For example, in the network shown in Figure 7, all messages to SSN x could be sent to ASP1 in Host3 or ASP1 in Host4. The AS list at SGP1 in Host 1 might look like the following: Routing Key {SSN=x) - "Application Server #1" ASP1/Host3 - State = Active ASP1/Host4 - State = Inactive In this "1+1" redundancy case, ASP1 in Host3 would be sent any incoming message with SSN=x. ASP1 in Host4 would normally be brought to the "active" state upon failure of, or loss of connectivity to, ASP1/Host1. The AS List at SGP1 in Host1 might also be set up in load-share mode: Routing Key {SSN=x) - "Application Server #1" ASP1/Host3 - State = Active ASP1/Host4 - State = Active In this case, both the ASPs would be sent a portion of the traffic. For example the two ASPs could together form a database, where incoming queries may be sent to any active ASP. Care might need to be exercised by a Network Operator in the selection of the routing information to be used as the Routing Key for a particular AS. B. Bidulock Version 0.5 Page 146 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 For example, where Application Servers are defined using ranges of GT Address values, the Operator is implicitly splitting up control of the related address groups. Some GT address value range assignments may interfere with TCAP subsystem management procedures. In the process of fail-over, it is recommended that in the case of ASPs that transactions do not fail. For example, the two ASPs may share transaction state via shared memory, or may use an ASP to ASP protocol to pass transaction state information. Any ASP-to-ASP protocol to support this function is outside the scope of this document. A.2.2. Signalling Gateway Redundancy Signalling Gateways may also be distributed over multiple hosts. Much like the AS model, SGs may comprise one or more SG Processes (SGPs), distributed over one or more hosts, using an override, load- share or broadcast model. Should an SGP lose all or partial SS7 connectivity and other SGPs exist, the SGP may terminate the SCTP associations to the concerned ASPs or send an unsolicited ASPIA ACK for the concerned Application Servers. It is possible for an ASP to route signalling messages destined to the SS7 network using more than one SGP. In this model, a Signalling Gateway is deployed as a cluster of hosts acting as a single SG. An override redundancy model is possible, where the unavailability of the SCTP association to a primary SGP could be used to reroute affected traffic to an alternate SGP. A load-sharing model is possible, where the signalling messages are load-shared between multiple SGPs. A broadcast model is also possible, where signalling messages are sent to each active SGP in the SG. The distribution of the TC-user messages over the SGPs should be done in such a way to minimize message mis- sequencing, as required by the SS7 User Parts. It may also be possible for an ASP to use more than one SG to access a specific SS7 end point, in a model that resembles an SS7 STP mated pair. Typically, SS7 STPs are deployed in mated pairs, with traffic load-shared between them. Other models are also possible, subject to the limitations of the local SS7 network provisioning guidelines. From the perspective of the TUA layer at an ASP, a particular SG is capable of transferring traffic to a provisioned SS7 destination, subsystem or application X if an SCTP association with at least one SGP of the SG is established, the SGP has returned an acknowledgment to the ASP to indicate that the ASP is actively handling traffic for that destination, subsystem or application X, and the SGP has not indicated that the destination, subsystem or application X is inaccessible. When an ASP is configured to use multiple SGPs for transferring traffic to the SS7 network, the ASP must maintain knowledge of the current capability of the SGPs to handle traffic to destinations, subsystems and applications of interest. This information is crucial to the overall reliability of the service, for override, load-sharing and broadcast models, in the event of failures, B. Bidulock Version 0.5 Page 147 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 recovery and maintenance activities. The ASP TUA may also use this information for congestion avoidance purposes. The distribution of the TC-user messages over the SGPs should be done in such a way to minimize message mis-sequencing, as required by the some TCAP applications. 0. Change History This section provides historical information on the changes made to this draft. This section will be removed from the document when the document is finalized. 0.5. Changes from Version 0.4 to Version 0.5 + updated boilerplate and to idnits-2.00.1 + updated references and version numbers 0.4. Changes from Version 0.3 to Version 0.4 + changed to new boilerplate for first and last page + updated references and version numbers + resubmitted to sync with IETF numbering 0.3. Changes from Version 0.2 to Version 0.3 + updated references and version numbers 0.2. Changes from Version 0.1 to Version 0.2 + split references into Normative and Informative sections. + updated security section. + updated references and version numbers. + split abbreviations and terminology. + moved appendices. + minor formattting changes. 0.1. Changes from Version 0.0 to Version 0.1 + updated security, references and version numbers, + updated registration procedures to be consistent with M3UA [M3UA] and SUA [SUA], + updated author's address. Change Log $Log: draft-bidulock-sigtran-tua-05.me,v $ Revision 0.9.2.1 2007/02/03 15:47:21 brian - added new drafts Revision 0.9.2.6 2006/06/27 09:41:13 brian - rereleased drafts B. Bidulock Version 0.5 Page 148 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Revision 0.9.2.5 2006/06/18 20:53:33 brian - preparing for draft rerelease Revision 0.9.2.4 2005/11/01 11:20:46 brian - updates for testing and documentation Revision 0.9.2.3 2005/10/17 11:53:44 brian - updated drafts for republication Revision 0.9.2.2 2005/05/14 08:33:17 brian - copyright header correction Revision 0.9.2.1 2004/03/16 05:10:28 brian - Added drafts and figures. Revision 0.8.2.5 2003/07/29 00:34:57 brian Finalizing latest round of drafts. Revision 0.8.2.4 2003/07/28 13:12:48 brian Reformatting. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels," BCP 14/RFC 2119, The Internet Society (March 1997). [SCTP] Stewart, R. R., Xie, Q., Morneault, K., Sharp, C., Schwarzbauer, H. J., Taylor, T., Rytina, I., Kalla, H., Zhang, L. and Paxson, V., "Stream Control Transmission Protocol (SCTP)," RFC 2960, The Internet Society (October 2000). (Updated by RFC 3309) (Status: PROPOSED STANDARD) [STD63] Yergeau, F., "UTF-8, a transformation of ISO 10646," STD 63/RFC 3629, The Internet Society (November 2003). (Obsoletes RFC 2279) (Status: STANDARD) (Also STD 63) [X.681] ITU, "Data Networks and Open System Communications -- OSI Networking and System Aspects -- Abstract Syntax Notation One (ASN.1): Information Object Specification," ITU-T Recommendation X.681 [ISO/IEC 8824-2 : 1994], ITU-T Telecommunication Standardization Sector of ITU, International Organization for Standardization, Geneva (July 1994). (Previously "CCITT Recommendation") [SIGSEC] Loughney, J., Tuexen, M. and Pastor-Balbas, J., "Security Considerations for Signaling Transport (SIGTRAN) Protocols," RFC 3788, Internet Engineering Task Force -- Signalling Transport B. Bidulock Version 0.5 Page 149 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Working Group (June 2004). [RFC2434] Narten, T., Alvestrand, H. T., "Guidelines for Writing an IANA Considerations Section in RFCs," RFC 2434, The Internet Society (October 1998). Informative References [RFC2719] Ong, L., Rytina, I., Holdrege, M., Coene, L., Garcia, M.-A., Sharp, C., Juhasz, I., Lin, H. P. and Schwarzbauer, HannsJ., "Framework Architecture for Signaling Transport," RFC 2719, The Internet Society (October 1999). [Q.771] ITU, "Signalling System No. 7 -- Functional Description of Transaction Capabilities," ITU-T Recommendation Q.771, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [T1.114] ANSI, "Signalling System No. 7 -- Transaction Capabilities Application Part," ANSI T1.114, American National Standards Institute (1992). [Q.701] ITU, "Functional Description of the Message Transfer Part (MTP) of Signalling System No. 7," ITU-T Recommendation Q.701, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [T1.111] ANSI, "Signalling System No. 7 -- Message Transfer Part," ANSI T1.111, American National Standards Institute (1992). [Q.711] ITU, "Functional Description of Signalling Connection Control Part," ITU-T Recommendation Q.711, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [Q.704] ITU, "Message Transfer Part -- Signalling Network Functions and Messages," ITU-T Recommendation Q.704, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [SUA] Loughney, J., Sidebottom, G., Coene, L., Verwimp, G., Keller, J. and Bidulock, B., "Signalling Connection Control Part User Adaptation Layer (SUA)," RFC 3868, The Internet Society (October 2004). [M3UA] Morneault, K., Pastor-Balbas, J., (eds), "Signaling System 7 (SS7) Message Transfer Part 3 (MTP3) -- User Adaptation Layer (M3UA)," RFC 4666, The Internet Society (September 2006). [Q.705] ITU, "Signalling System No. 7 -- Signalling Network Structure," ITU-T Recommendation Q.705, ITU-T Telecommunication B. Bidulock Version 0.5 Page 150 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [T1.112] ANSI, "Signalling System No. 7 -- Signalling Connection Control Part," ANSI T1.112, American National Standards Institute (1992). [Q.773] ITU, "Signalling System No. 7 -- Transaction Capabilities Formats and Encoding," ITU-T Recommendation Q.773, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [Q.775] ITU, "Signalling System No. 7 -- Guidelines for Using Transaction Capabilities," ITU-T Recommendation Q.775, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [CORID03] Bidulock, B., "Correlation Id and Heartbeat Procedures Supporting Lossless Fail-Over," draft-bidulock-sigtran- corid-03.txt, Internet Engineering Task Force -- Signalling Transport Working Group (October 16, 2005). Work In Progress. (Expired) [Q.714] ITU, "Signalling Connection Control Part Procedures," ITU-T Recommendation Q.714, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") [Q.713] ITU, "Signalling Connection Control Part Formats and Codes," ITU-T Recommendation Q.713, ITU-T Telecommunication Standardization Sector of ITU, Geneva (March 1993). (Previously "CCITT Recommendation") B. Bidulock Version 0.5 Page 151 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Acknowledgments The authors would like to thank Jianxing Hou, Min Lin for their original input to this document, and to the authors of M2UA, M3UA and SUA for the large sections of text which apply also to TUA and was included here. Author's Addresses Brian Bidulock OpenSS7 Corporation 1469 Jeffreys Crescent Edmonton, AB T6L 6T1 Canada Phone: +1-780-490-1141 Email: bidulock@openss7.org URL: http//www.openss7.org/ This draft expires August 2007. B. Bidulock Version 0.5 Page 152 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 List of Tables Table 1. Mapping of Management Primitives ....................... 9 Table 2. Mapping of Dialogue Handling Primitives ................ 16 Table 3. Mapping of Component Handling Primitives ............... 17 List of Illustrations Figure 1. Protocol Architecture ................................. 6 Figure 2. All IP Architecture ................................... 7 Figure 3. TUA Protocol Boundaries ............................... 15 Figure 4. TUA Layer Model ....................................... 112 Figure 5. ASP State Transition Diagram (Per AS) ................. 117 Figure 6. AS State Transition Diagram ........................... 119 Figure 7. Physical Model ........................................ 145 Table of Contents Status of this Memo ............................................. 1 Copyright ....................................................... 1 Abstract ........................................................ 1 Contents ........................................................ 2 1 Introduction .................................................. 2 1.1 Scope ....................................................... 2 1.2 Terminology and Abbreviations ............................... 2 1.2.1 Abbreviations ............................................. 2 1.2.2 Terminology ............................................... 3 1.3 TUA Overview ................................................ 5 1.3.1 Signalling Transport Architecture ......................... 5 1.3.2 Protocol Architecture for Classes 1, 2, 3 and 4 ........... 5 1.3.3 All IP Architecture ....................................... 6 1.3.4 ASP Fail-over Model and Terminology ....................... 7 1.3.5 Services Provided by the TUA Layer ........................ 7 1.4 Functional Areas ............................................ 10 1.4.1 Dialogue Identifiers, Routing Contexts and Routing Keys ............................................................... 10 1.4.2 Routing Key Limitations ................................... 10 1.4.3 Managing Routing Context and Routing Keys ................. 11 1.4.4 Transaction Mapping Function .............................. 11 1.4.5 Signalling Gateway SS7 Layers ............................. 12 1.4.6 SS7 and TUA Interworking at the SG ........................ 13 1.4.7 Application Server ........................................ 13 1.4.8 SCTP Stream Mapping ....................................... 13 1.4.9 Application Server Redundancy ............................. 14 1.4.10 Flow Control ............................................. 14 1.4.11 Congestion Management ................................... 14 1.5 Definition of TUA Boundaries ................................ 15 1.5.1 Definition of Upper Boundary .............................. 15 1.5.2 Definition of Boundary between TUA and Layer Management ............................................................... 17 1.5.3 Definition of the Lower Boundary .......................... 21 Notes for Section 1 ............................................. 21 B. Bidulock Version 0.5 Page 153 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 2 Conventions ................................................... 21 3 Protocol Elements ............................................. 22 3.1 Common Message Header ....................................... 22 3.1.1 TUA Protocol Version ...................................... 23 3.1.2 Message Classes ........................................... 23 3.1.3 Message Types ............................................. 23 3.1.4 Message Length ............................................ 25 3.1.5 Tag-Length-Value Format ................................... 25 3.2 TUA Message Header .......................................... 26 3.3 TUA Dialogue Handling (DH) Messages ......................... 27 3.3.1 DH Message Header ......................................... 27 3.3.2 Unidirectional (TUNI) ..................................... 27 3.3.3 Query (TQRY) .............................................. 29 3.3.4 Conversation (TCNV) ....................................... 31 3.3.5 Response (TRSP) ........................................... 33 3.3.6 U-Abort (TUAB) ............................................ 35 3.3.7 P-Abort (TPAB) ............................................ 36 3.3.8 Notice (TNOT) ............................................. 36 3.4 TUA Component Handling (CH) Messages ........................ 37 3.4.1 CH Message Header ......................................... 37 3.4.2 Invoke (CINV) ............................................. 38 3.4.3 Result (CRES) ............................................. 39 3.4.4 Error (CERR) .............................................. 40 3.4.5 Reject (CREJ) ............................................. 41 3.4.6 Cancel (CCAN) ............................................. 42 3.5 SS7 Signalling Network Management (SSNM) Messages ........... 42 3.5.1 Destination Unavailable (DUNA) ............................ 42 3.5.2 Destination Available (DAVA) .............................. 44 3.5.3 Destination State Audit (DAUD) ............................ 45 3.5.4 Network Congestion (SCON) ................................. 46 3.5.5 Destination User Part Unavailable (DUPU) .................. 48 3.5.6 Destination Restricted (DRST) ............................. 49 3.6 Application Server Process State Maintenance (ASPSM) Messages ...................................................... 51 3.6.1 ASP Up (UP) ............................................... 51 3.6.2 ASP Up Ack (UP ACK) ....................................... 51 3.6.3 ASP Down (DOWN) ........................................... 52 3.6.4 ASP Down Ack (DOWN ACK) ................................... 52 3.6.5 Heartbeat (BEAT) .......................................... 53 3.6.6 Heartbeat Ack (BEAT ACK) .................................. 53 3.7 Application Server Process Traffic Maintenance (ASPTM) Messages ...................................................... 54 3.7.1 ASP Active (ASPAC) ........................................ 54 3.7.2 ASP Active Ack (ASPAC ACK) ................................ 55 3.7.3 ASP Inactive (ASPIA) ...................................... 56 3.7.4 ASP Inactive Ack (ASPIA ACK) .............................. 56 3.8 Management (MGMT) Messages .................................. 57 3.8.1 Error (ERR) ............................................... 57 3.8.2 Notify (NTFY) ............................................. 59 3.9 Routing Key Management (RKM) Messages ....................... 60 3.9.1 Registration Request (REG REQ) ............................ 60 3.9.2 Registration Response (REG RSP) ........................... 61 3.9.3 Deregistration Request (DEREG REQ) ........................ 62 B. Bidulock Version 0.5 Page 154 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 3.9.4 Deregistration Response (DEREG RSP) ....................... 63 3.10 Common Parameters .......................................... 64 3.10.1 Info String .............................................. 64 3.10.2 Routing Context .......................................... 65 3.10.3 Diagnostic Information ................................... 66 3.10.4 Heartbeat Data ........................................... 66 3.10.5 Traffic Mode Type ........................................ 67 3.10.6 Error Code ............................................... 68 3.10.7 Status ................................................... 71 3.10.8 ASP Identifier ........................................... 72 3.10.9 Affected Point Code ...................................... 72 3.10.10 Correlation Id .......................................... 74 3.10.11 Registration Result ..................................... 74 3.10.12 Deregistration Result ................................... 75 3.10.13 Registration Status ..................................... 76 3.10.14 Deregistration Status ................................... 77 3.10.15 Local Routing Key Identifier ............................ 77 3.11 TUA-Specific parameters .................................... 78 3.11.1 Parameters used in DH Messages ........................... 79 3.11.2 Parameters used in CH Messages ........................... 93 3.11.3 Other Parameters ......................................... 100 Notes for Section 3 ............................................. 110 4 Procedures .................................................... 111 4.1 Procedures to Support the TC-User ........................... 111 4.1.1 Receipt of Primitives from the TC-User .................... 111 4.1.2 Receipt of Primitives from TCAP ........................... 112 4.1.3 Receipt of Primitive from the Layer Management ............ 114 4.2 Procedures to Support the Management of SCTP Associations ............................................................... 115 4.2.1 Receipt of TUA Peer Management Messages ................... 115 4.3 AS and ASP State Maintenance ................................ 116 4.3.1 ASP/IPSP States ........................................... 116 4.3.2 AS States ................................................. 118 4.3.3 TUA Management Procedures for Primitives .................. 120 4.3.4 ASPM Procedures for Peer-to-Peer Messages ................. 120 4.4 Routing Key Management Procedures ........................... 129 4.4.1 Registration .............................................. 129 4.4.2 Deregistration ............................................ 130 4.4.3 IPSP Considerations (REG/DEREG) ........................... 131 4.5 Procedures to Support Point Code and Subsystem State ........ 131 4.5.1 At an SGP ................................................. 131 4.5.2 At an ASP ................................................. 132 4.5.3 ASP Auditing .............................................. 132 4.5.4 TCAP - TUA Interworking at the SG ......................... 133 Notes for Section 4 ............................................. 134 5 Examples of TUA Procedures .................................... 134 5.1 Establishment of Association and Traffic between SGPs and ASPs .......................................................... 134 5.1.2 ASP Traffic Fail-over Examples ............................ 136 5.1.3 TCAP/TC-User Service Translation Examples ................. 138 5.2 IP-IP Architecture .......................................... 139 5.2.1 Establishment of TUA connectivity ......................... 139 5.2.2 Fail-over scenarios ....................................... 141 B. Bidulock Version 0.5 Page 155 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 6 Security Considerations ....................................... 141 7 IANA Considerations ........................................... 141 7.1 SCTP Payload Protocol ID .................................... 141 7.2 Port Number ................................................. 142 7.3 Protocol Extensions ......................................... 142 7.3.1 IETF Defined Message Classes .............................. 142 7.3.2 IETF Defined Message Types ................................ 142 7.3.3 IETF-defined TLV Parameter Extension ...................... 143 8 Timer Values .................................................. 143 Appendices ...................................................... 143 A Operational Considerations .................................... 143 A.1 Signalling Network Architecture ............................. 143 A.2 Redundancy Models ........................................... 146 A.2.1 Application Server Redundancy ............................. 146 A.2.2 Signalling Gateway Redundancy ............................. 147 0 Change History ................................................ 148 0.5 Changes from Version 0.4 to Version 0.5 ..................... 148 0.4 Changes from Version 0.3 to Version 0.4 ..................... 148 0.3 Changes from Version 0.2 to Version 0.3 ..................... 148 0.2 Changes from Version 0.1 to Version 0.2 ..................... 148 0.1 Changes from Version 0.0 to Version 0.1 ..................... 148 Change Log ...................................................... 148 Normative References ............................................ 149 Informative References .......................................... 150 Acknowledgments ................................................. 152 Author's Addresses .............................................. 152 List of Tables .................................................. 153 List of Illustrations ........................................... 153 Table of Contents ............................................... 153 B. Bidulock Version 0.5 Page 156 Internet Draft SS7 TCAP-User Adaptation Layer February 3, 2007 Intellectual Property The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79. Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr. The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- ipr@ietf.org. Disclaimer of Validity This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Full Copyright Statement Copyright (C) The IETF Trust (2007). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights. Acknowledgement Funding for the RFC Editor function is currently provided by the Internet Society. B. Bidulock Version 0.5 Page 157