Secure Inter-Domain Routing E. Barnes
Internet-Draft BBN Technologies
Intended status: Standards Track February 13, 2014
Expires: August 17, 2014

Resource Public Key Infrastructure (RPKI) Resource Transfer Protocol and Transfer Authorization Object (TAO)
draft-barnes-sidr-tao-00

Abstract

This document defines an extension to the rpki-updown protocol to provide support for transferring Internet Number Resources from one INR holder to another. Such transfers take place external to the RPKI, using procedures defined within and between RIRs. This protocol facilitates automation of the maintenance of RPKI data in the context of INR transfers. The protocol supports asynchronous transfers of live or unused INRs within an RIR or between RIRs. The scope of this protocol is limited to the transfer of Internet Number Resources within the Resource Public Key Infrastructure. In support of this protocol, this document also defines a new signed object type for the RPKI repository system, the Transfer Authorization Object (TAO).

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."

This Internet-Draft will expire on August 17, 2014.

Copyright Notice

Copyright (c) 2014 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.


Table of Contents

1. Introduction

This document defines an extension to the rpki-updown protocol, defined in [RFC6492], to provide support for transferring Internet Number Resources from one INR holder to another. The protocol supports asynchronous transfers of live or unused INRs. The scope of the protocol is limited to the transfer of Internet Number Resource within the Resource Public Key Infrastructure, defined in [RFC6480]. In support of this protocol, this document also defines a new signed object type, the Transfer Authorization Object (TAO), which makes use of the signed object format defined in [RFC6488].

Many of the messages in this protocol are identical to those in [RFC6488], and the result of the protocol, updated certificates published in the RPKI repository system [RFC6481], is the same for both protocols. To initiate a transfer, an INR holder, or source, creates a TAO and publishes it in its publication point. The TAO is a declaration of the proposed transfer, signed by the transfer source. The source communicates the location of the TAO to the INR recipient. Both entities then pursue the transfer independently, recursively requesting the transfer from their parents until the lowest common ancestor, the swing point is reached. The swing point acts as the ultimate arbiter of the transfer, although any Certification Authority (CA) involved in the transfer is able to deny the transfer. The protocol assumes that the source of the transfer, and the recipient have gained preliminary approval for the transfer, out-of-band (OOB), prior to publishing the TAO and initiating the protocol.

1.1. Terminology

Terms used in this document are:
"Internet Number Resource"
(or "resource" or "INR") used in the context of this document to refer to Autonomous System (AS) numbers and IP version 4 or IP version 6 addresses.
"swing point"
the lowest common ancestor (Certification Authority) of both the INR source and the INR recipient in the RPKI hierarchy. It is assumed that the swing point is neither the source nor the recipient.
"source"
(or "INR source") the INR holder that initiates the transfer
"recipient"
(or "INR recipient") the INR holder that is the destination of the transfer
"live"
a live INR is a resource that is currently in use

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14, [RFC2119].

2. Scope

This Resource Public Key Infrastructure (RPKI) INR transfer protocol defines a basic set of interactions that allows:

The resource allocation database and INR transfer policies of each CA along the path are authoritative when determining whether the resources in question may be transferred.

This protocol specification does not encompass:

3. Protocol Specifications

The INR source MUST initiate the transfer by creating and publishing the Transfer Authorization Object (TAO, see Section 3.4) at its publication point [RFC6481]. The URL of the TAO SHOULD be communicated to the transfer recipient, e.g., via email. Once the TAO is published, and the recipient has received the URL of the TAO, two separate processes begin: the first from the INR source to the swing point, the second from the transfer recipient to the swing point. These two processes proceed independently and recursively. The following steps occur between each parent and child along the specified paths in the hierarchy.

In both cases, when a CA receives an updated certificate from its immediate parent, it MUST promptly update the certificate for the child involved in the transfer. This certificate is published in its publication point and sent to the child using a transfer_response message (Section 3.8.1.2. If this CA is the INR source or INR recipient, no updates are necessary since receipt of the updated certificate indicates that the parent has updated the end point of the transfer. Similarly, when a CA receives an error message from a parent, the CA MUST forward the message code to its immediate child along the path towards the INR source or INR recipient.

Both the INR source and the INR recipient MUST NOT rekey during a transfer; their SKIs are captured in the TAO and the validity of the TAO requires the SKIs not change during the process. A new key would invalidate the TAO and require restarting the transfer process. To avoid this problem, the source SHOULD NOT initiate a transfer that is expected to take longer than the notAfter date in its, or the recipient's, CA certificate. The source should contact (OOB) the CA's along the path to receive an estimate of the time required to complete a transfer, to aid in making this determination.

The process described below is used for transferring either live or unused INRs. The process is identical for both types of transfers except where otherwise specified.

3.1. INR Source Path

The source MUST NOT request a transfer of any INRs that are delegated to one of the source's children (i.e., appear in a CA certificate issued by the source). This requirement avoids one way that a TAO that is valid at the beginning of a transfer could become invalid before the end of the transfer. In particular, in the instance where the source of this transfer is the swing point in another transfer, this prevents the swing point from transferring INRs to a different recipient than specified in the first transfer.

Along the path from the INR source to the swing point, with the INR source as the initial "child", the following messages MUST be transmitted in the specified order.

  1. The child sends a transfer_request (Section 3.8.1.1) to its parent.
  2. The parent confirms the validity of the transfer_request, responding with an error code 1203 for invalid requests. An invalid request cancels the transfer. A transfer_request is valid if all of the following are true:
  3. The parent replies with a transfer_response (Section 3.8.1.2). For transfers of unused INRs, the transfer_response contains an updated certificate, which MUST have the same INRs as the certificate it replaces, minus the INRs specified in the TAO. For live transfers, the transfer_response contains an error code 1104 response, indicating that the transfer is valid and being pursued asynchronously.
  4. The parent determines if it (the parent) is the swing point. See Section 3.3 for this procedure. If it is not the swing point, the parent repeats this process from step 1, acting as the child. If the parent is not the swing point but is a self-signed CA, an error code 1401 MUST be returned.

If, after an excessive wait, a child does not receive a response from its parent, the child SHOULD return error 1402 indicating a timeout. This error declares cancellation of the transfer request by the child, and MUST be propagated up AND down the path. This informs any parents waiting further up the path that the child is no longer waiting for an updated certificate, and indicates that the parent MUST time out as well. Ultimately, what constitutes an excessive wait is determined by each CA. However, it is RECOMMENDED that each CA not time out a transfer prior to the notAfter value in the TAO.

For live transfers, the source waits until the notAfter value in the TAO expires. If the recipient has successfully received the INRs at that point, the source MUST use the following process to relinquish control of the transferred INRs:

  1. The child sends a transfer_request (Section 3.8.1.1) to the parent.
  2. The parent confirms that the transfer_request matches a previous transfer_request, with the exception that the notAfter MUST be in the past. The parent responds with an error code 1203 for invalid requests. A transfer_request is valid if all of the following are true:
  3. The parent replies with a transfer_response (Section 3.8.1.2). This response MUST include an updated certificate which MUST have the same INRs as the certificate it replaces, minus the INRs specified in the TAO.
  4. The parent determines if it (the parent) is the swing point. See Section 3.3 for this procedure. If it is not the swing point, the parent repeats this process from step 1, acting as the child. If the parent is not the swing point but is a self-signed CA, an error code 1401 MUST be returned.

3.2. INR Recipient Path

A recipient will have multiple parents within the RPKI if it has received INR allocations from multiple sources. In such cases, the recipient MUST select the parent via which the resources will be received. The means by which a recipient makes this decision are outside the scope of this protocol. (INR transfers require OOB coordination among the affected organizations. This coordination is expected to provide the recipient with a basis for selecting a parent for the transfer.)

Along the path from the transfer recipient to the swing point, with the INR recipient as the initial "child", the following messages MUST be transmitted in the order specified below.

  1. The child sends a transfer_request, Section 3.8.1.1, to the parent.
  2. The parent confirms the validity of the transfer_request, responding with an error code 1203 for invalid requests. A transfer_request is valid only if all of the following are true:
  3. The parent determines if it (the parent) is the swing point. See Section 3.3 for this procedure.
  4. If it is not the swing point, the parent replies with a transfer_response containing an error code. If the parent is a self-signed CA and it is not the swing point, an error code 1401 MUST be returned. If the parent is not a self-signed CA, an error code 1104 response MUST be returned, indicating that the transfer is valid and being pursued asynchronously. The parent then repeats this process from step 1, acting as the child.

If, after an excessive wait, a child does not receive a response from its parent, the child SHOULD return error 1402 indicating a timeout. This error declares cancellation of the transfer request by the child, and MUST be propagated up AND down the path by each parent. See the previous section for a discussion of what constitutes "excessive".

During live transfers, CAs in the recipient path have an additional responsibility after receiving an updated certificate. The overlapPeriod field of the TAO MUST be less than that number of seconds from the current time to the notAfter value of the TAO. If this test fails, this CA MUST forward an error code 1403 up and down the path, ending the transfer. This minimizes the likelihood that the source and recipient do not have an adequate overlap in ownership of the INRs in question during a live transfer.

3.3. Swing Point

A CA determines that it is the swing point by verifying that both the INR source and the INR recipient SKIs, as defined in the TAO, are below the CA in the hierarchy. Because this determination is performed for both paths, starting at the source and the recipient, this will uniquely determine the swing point. This document does not cover the case where the swing point is the source or the recipient. If the swing point is the recipient, the INRs are being relinquished and returned to that organization. If the swing point is the source, the INRs are being assigned. This procedure is already accommodated by use of the up/down protocol. Because the RPKI hierarchy is intended to have a unique root, there should always exist a swing point.

The swing point MUST behave as follows:

  1. Confirm that it is the swing point.
  2. Confirm the validity and uniqueness of the Subject Key Identifiers (SKI) of the CAs (source and recipient)in the TAO.
  3. Confirm that it controls the INRs to be transferred.
  4. Wait to receive both transfer_requests, one from the path to the source and one from the path to the recipient.
  5. Create an updated certificate for the CA on the path from the swing point to the transfer recipient. Publish this certificate in the swing point's publication point and send the updated certificate to the child CA using a transfer_response message. This updated certificate MUST have the same INRs as the certificate it replaces, plus the INRs specified in the TAO. (The swing point MUST still control the INRs being transferred, but this is a side effect of its normal certificate issuance process.)

Should a swing point receive an error code 1403 message from the CA in the recipient path, the swing point must forward the error code to the CA on the source path, indicating a cancellation of the transfer.

3.4. Transfer Authorization Object

The TAO is encapsulated in a CMS object as defined in [RFC6492] Section 3.1.

3.4.1. TAO Type

TAO OID TBD

3.4.2. TAO Validation

The TAO must be validated by each participant in the process. The creator of the TAO MUST validate the TAO after creation. All CAs that receive a Transfer Request MUST perform the following actions:

  1. Determine that the TAO is valid as defined by the steps in [RFC6488] Section 3.
  2. Verify that either the transferFromSKI or the transferToSKI (or both) correspond to CAs that are descendants of this CA

  3. Verify that the transferFromSKI and the transferToSKI SKIs are valid, corresponding to the SKI extension of a CA within the RPKI, and unique, such that only one CA has an SKI extension that matches each of these values. (This check SHOULD be performed using the RPKI data acquired by the participant in its role as a relying party [RFC6480].)
  4. The parent of the source checks that the source holds the INRs in question. Each CA above that checks that the INRs are held by the CA that made the request.

3.5. ASN.1 Specification of the TAO

 TransferAuthorization ::= SEQUENCE {
   transferFromSKI OCTET STRING,
   transferToSKI OCTET STRING,
   ipAddrBlocks [0] IPAddrBlocks OPTIONAL,
   asIdentifiers [1] ASIdentifiers OPTIONAL,
   liveXfer BOOLEAN DEFAULT FALSE,
   overlapPeriod INTEGER OPTIONAL
}

3.5.1. transferFromSKI

The transferFromSKI MUST be equal to the SKI of the CA that holds the resources.

3.5.2. transferToSKI

The transferToSKI MUST be equal to the SKI in a valid CA within the RPKI.

3.5.3. ipAddrBlocks

IPAddrBlocks is specified in [RFC3779] Section 2. If the ipAddrBlocks attribute is included, it MUST NOT be empty and it MUST NOT have any resources marked as inherit.

3.5.4. asIdentifiers

ASIdentifiers is specified in [RFC3779] Section 3. If the asIdentifiers attribute is included, it MUST NOT be empty and the inherit flag MUST NOT be TRUE.

3.5.5. liveXfer

This flag is set TRUE only for a transfer of live resources.

3.5.6. overlapPeriod

overlapPeriod is the minimum number of seconds which the source and recipient MUST both hold the INRs. This field MUST hold a non-zero number for live transfers. The value MUST be omitted for transfers of unused space. Thus this field is present only if liveXfer is TRUE.

3.6. Common Message Format

This document defines version 2 of the Common Message Format for the up/down protocol. Version 1 is defined in [RFC6492]. The format in version 2 is identical to version 1, but with several added attributes, defined in Section 3.8, and one additional constraint defined in Section 3.7. The checks specified in [RFC6492] Section 3.2 still apply and MUST be applied.

3.7. End Entity Certificate Constraint

This section corresponds to Section 3.1.1.4 in [RFC6492]. The End Entity (EE) certificate that is required here MUST have its resources marked as inherit. This convention is imposed to ensure that this certificate remains valid during the life of the TAO before, during, and after the transfer takes place.

3.8. INR Transfer

3.8.1. Transfer

This query is used for all requests and responses made during a transfer. This includes messages between the initial sender and its parent, the receiver and its parent, and between each intermediate CA and its parent.

3.8.1.1. Request

The value of the message "type" element for this request is:

----------------------

Payload:

 <request
tao_url="url">
[tao]
</request>

tao_url:
value is the pointer to the location where the INR source has published the TAO.
[tao]
value is the Base64 encoding of the DER-encoded TAO. After decoding, this object MUST be identical to the object published by the source in its publication point.

3.8.1.2. Response

The value of the message "type" element for this response is:

--------------------

Payload:

<class
tao_url="url"
cert_url="url"
resource_set_as="as resource set"
resource_set_ipv4="ipv4 resource set"
resource_set_ipv6="ipv6 resource set"
resource_set_notafter="datetime"
suggested_sia_head="[directory uri]">
<certificate cert_url="url"
req_resource_set_as="as resource set"
req_resource_set_ipv4="ipv4 resource set"
req_resource_set_ipv6="ipv6 resource set" >
[certificate]
</certificate>
<issuer>[issuer's certificate]</issuer>
</class>

In the case where the transfer is for live resources, not all responses will contain a certificate. For the CAs in the path with the INR source, an updated certificate, with the transferred INR removed, will be available once the transfer is complete and the INR source is prepared to relinquish control of the INRs. In contrast, the CAs along the path to the transfer recipient each receive a new certificate after the swing point receives and approves the messages from both the source and the recipient.

tao_url is identical to the tao_url in the request. The definition of all other attributes can be found in [RFC6492] Section 3.3.2.

3.8.2. Request-Not-Performed Response

This response is an extension of [RFC6492] Section 3.6. In addition to the error codes defined there, Error Code 1401 is used when a self-signed CA determines that it is not an ancestor of both the source and the recipient. This indicates a failure of the automated transfer and a manual transfer must take place.

3.8.3. Timeout Response

This response is an extension of [RFC6492] Section 3.6. In addition to the error codes defined there, Error Code 1402 is used when a CA determines that it has waited an excessive duration for a response from its parent. This indicates a failure of the transfer.

3.8.4. Overlap Failure Response

This response is an extension of [RFC6492] Section 3.6. In addition to the error codes defined there, Error Code 1403 is used when a CA in the recipient path determines that the overlapPeriod value is less than the number of seconds between the current time and the notAfter value in the TAO. This indicates a failure of the transfer.

3.9. XML Schema

default namespace = "http://www.apnic.net/specs/rescerts/up-down/"

grammar {
   resource_set_as = xsd:string {  maxLength="512000"
                                   pattern="[\-,0-9]*" }
   resource_set_ip4 = xsd:string { maxLength="512000"
                                   pattern="[\-,/.0-9]*" }
   resource_set_ip6 = xsd:string { maxLength="512000"
                                   pattern="[\-,/:0-9a-fA-F]*" }


   class_name = xsd:token { minLength="1" maxLength="1024" }
   ski = xsd:token { minLength="27" maxLength="1024" }
   label = xsd:token { minLength="1" maxLength="1024" }
   cert_url = xsd:string { minLength="10" maxLength="4096" }
   base64_binary = xsd:base64Binary { minLength="4"
                                      maxLength="512000" }
   tao_url = xsd:string { minLength="10" maxLength="4096" }

   start = element message {
      attribute version { xsd:positiveInteger {
                                           maxInclusive="1" } },
      attribute sender { label },
      attribute recipient { label },
      payload
   }

   payload |= attribute type { "list" }, list_request
   payload |= attribute type { "list_response"}, list_response
   payload |= attribute type { "issue" }, issue_request
   payload |= attribute type { "issue_response"}, issue_response
   payload |= attribute type { "revoke" }, revoke_request
   payload |= attribute type { "revoke_response"}, revoke_response
   payload |= attribute type { "error_response"}, error_response
   payload |= attribute type { "transfer_response"}, 
                                transfer_response

   list_request = empty
   list_response = class*

   class = element class {
     attribute class_name { class_name },
     attribute cert_url { cert_url },
     attribute resource_set_as { resource_set_as },
     attribute resource_set_ipv4 { resource_set_ip4 },
     attribute resource_set_ipv6 { resource_set_ip6 },
     attribute resource_set_notafter { xsd:dateTime },
     attribute suggested_sia_head { xsd:anyURI { maxLength="1024"
                                           pattern="rsync://.+"} }?,
     element certificate {
       attribute cert_url { cert_url },
       attribute req_resource_set_as { resource_set_as }?,
       attribute req_resource_set_ipv4 { resource_set_ip4 }?,
       attribute req_resource_set_ipv6 { resource_set_ip6 }?,
       base64_binary
     }*,
     element issuer { base64_binary }
   }

   issue_request = element request {
     attribute class_name { class_name },
     attribute req_resource_set_as { resource_set_as }?,
     attribute req_resource_set_ipv4 { resource_set_ip4 }?,
     attribute req_resource_set_ipv6 { resource_set_ip6 }?,
     base64_binary
   }
   issue_response = class

   revoke_request = revocation
   revoke_response = revocation

   revocation = element key {
      attribute class_name { class_name },
      attribute ski { ski }
   }

   error_response =
     element status { xsd:positiveInteger { maxInclusive="9999" } },
     element description { attribute xml:lang { xsd:language },
                               xsd:string { maxLength="1024" } }*
   }

   transfer_request = element request {
     attribute tao_url { tao_url },
     element tao { base64_binary }
   }
   
   transfer_response = element response {
      attribute tao_url { tao_url }, 
      attribute cert_url { cert_url },
      attribute resource_set_as { resource_set_as },
      attribute resource_set_ipv4 { resource_set_ip4 },
      attribute resource_set_ipv6 { resource_set_ip6 },
      attribute resource_set_notafter { xsd:dateTime },
      attribute suggested_sia_head { xsd:anyURI { maxLength="1024"
                                            pattern="rsync://.+"} }?,
      element certificate {
         attribute cert_url { cert_url },
         attribute req_resource_set_as { resource_set_as }?,
         attribute req_resource_set_ipv4 { resource_set_ip4 }?,
         attribute req_resource_set_ipv6 { resource_set_ip6 }?,
         base64_binary
      }*,
      element issuer { base64_binary }
   }

The following is a RELAX NG compact form schema [ISO.19757-2.2003] describing version 2 of this protocol.

4. Security Considerations

The checks described at each stage are designed to ensure that these four security goals are met:

Up/down protocol messages contain a time-based anti-reply feature, so replays of these signed messages can be detected. If a request message is redirected, a CA receiving it will detect and reject this because the request will not be from one of its children. A redirected response message also will be detected because the response will not be from the child's immediate parent. Because all messages (both requests and responses) are contained within a CMS object, the sender of a message is validated through signature verification.

For live transfers, the source initiates the relinquishment of the INRs that were transferred. If they fail to initiate the relinquishment in a timely manner, the recipient may choose to contact any or all of the source's ancestors (up to the swing point) to pursue a forced relinquishment of resources. Any legal or contractual processes used are outside the scope of this document.

5. IANA Considerations

An OID is requested for the TAO object defined above.

6. Acknowledgements

The author would like to acknowledge the valued contribution of Steve Kent for providing a top level description of the TAO protocol, David Mandelberg for his contributions to the security of the protocol, and the authors of the rpki-updown protocol ([RFC6492]) Geoff Huston, Robert Loomans, Byron Ellacott, and Rob Austein.

7. References

7.1. Normative References

[RFC6492] Huston, G., Loomans, R., Ellacott, B. and R. Austein, "A Protocol for Provisioning Resource Certificates", RFC 6492, February 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC3779] Lynn, C., Kent, S. and K. Seo, "X.509 Extensions for IP Addresses and AS Identifiers", RFC 3779, June 2004.
[RFC6481] Huston, G., Loomans, R. and G. Michaelson, "A Profile for Resource Certificate Repository Structure", RFC 6481, February 2012.
[RFC6488] Lepinski, M., Chi, A. and S. Kent, "Signed Object Template for the Resource Public Key Infrastructure (RPKI)", RFC 6488, February 2012.

7.2. Informative References

[W3C.REC-xml-names-20091208] Hollander, D., Layman, A., Bray, T., Tobin, R. and H. Thompson, "Namespaces in XML 1.0 (Third Edition)", World Wide Web Consortium Recommendation REC-xml-names-20091208, December 2009.
[RFC6480] Lepinski, M. and S. Kent, "An Infrastructure to Support Secure Internet Routing", RFC 6480, February 2012.
[ISO.19757-2.2003] International Organization for Standardization, "Information technology -- Document Schema Definition Language (DSDL) -- Part 2: Regular-grammar-based validation -- RELAX NG", ISO International Standard 19757-2, December 2003.

Author's Address

Edric Barnes BBN Technologies 10 Moulton St Cambridge, MA US EMail: ebarnes@bbn.com